blob: 14cbb13362b05efd5163a17795331c5a012294e7 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standb9cfb0d2015-10-18 17:54:50 +00001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-776-gd98471c-dirty 10/18/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [ttyS0] enabled
182[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
183[ 0.000000] hpet clockevent registered
184[ 0.000000] tsc: Fast TSC calibration using PIT
185[ 0.000000] tsc: Detected 1909.869 MHz processor
186[ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.73 BogoMIPS (lpj=7639476)
187[ 0.010795] pid_max: default: 32768 minimum: 301
188[ 0.015450] ACPI: Core revision 20140424
189[ 0.021818] ACPI: All ACPI Tables successfully acquired
190[ 0.027172] Security Framework initialized
191[ 0.031298] AppArmor: AppArmor disabled by boot time parameter
192[ 0.037133] Yama: disabled by default; enable with sysctl kernel.yama.*
193[ 0.044878] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
194[ 0.058105] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
195[ 0.067881] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
196[ 0.074779] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.082630] Initializing cgroup subsys memory
198[ 0.087002] Initializing cgroup subsys devices
199[ 0.091473] Initializing cgroup subsys freezer
200[ 0.095931] Initializing cgroup subsys net_cls
201[ 0.100393] Initializing cgroup subsys blkio
202[ 0.104680] Initializing cgroup subsys perf_event
203[ 0.109389] Initializing cgroup subsys net_prio
204[ 0.113968] tseg: 0000000000
205[ 0.113982] CPU: Physical Processor ID: 0
206[ 0.118001] CPU: Processor Core ID: 0
207[ 0.121689] mce: CPU supports 6 MCE banks
208[ 0.125719] LVT offset 0 assigned for vector 0xf9
209[ 0.130447] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
210Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
211tlb_flushall_shift: 6
212[ 0.145788] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
213[ 0.154788] ftrace: allocating 21601 entries in 85 pages
214[ 0.170152] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
215[ 0.215676] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
216[ 0.332510] Performance Events: AMD PMU driver.
217[ 0.337082] ... version: 0
218[ 0.341094] ... bit width: 48
219[ 0.345190] ... generic registers: 4
220[ 0.349193] ... value mask: 0000ffffffffffff
221[ 0.354512] ... max period: 00007fffffffffff
222[ 0.359841] ... fixed-purpose events: 0
223[ 0.363853] ... event mask: 000000000000000f
224[ 0.371746] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
225[ 0.379952] x86: Booting SMP configuration:
226[ 0.384154] .... node #0, CPUs: #1 #2 #3
227[ 0.428504] .... node #1, CPUs: #4 #5 #6 #7
228[ 0.581232] x86: Booted up 2 nodes, 8 CPUs
229[ 0.585534] smpboot: Total of 8 processors activated (30558.18 BogoMIPS)
230[ 0.598078] devtmpfs: initialized
231[ 0.609980] pinctrl core: initialized pinctrl subsystem
232[ 0.615375] NET: Registered protocol family 16
233[ 0.620034] cpuidle: using governor ladder
234[ 0.624140] cpuidle: using governor menu
235[ 0.628077] node 0 link 1: io port [1000, 3fff]
236[ 0.628081] TOM: 00000000c0000000 aka 3072M
237[ 0.632274] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
238[ 0.632278] node 0 link 1: mmio [fc000000, fc3fffff]
239[ 0.632281] node 0 link 1: mmio [f8000000, fbffffff]
240[ 0.632284] TOM2: 0000000180000000 aka 6144M
241[ 0.636552] bus: [bus 00-05] on node 0 link 1
242[ 0.636554] bus: 00 [io 0x0000-0xffff]
243[ 0.636556] bus: 00 [mem 0xd0000000-0xffffffff]
244[ 0.636557] bus: 00 [mem 0x180000000-0xfcffffffff]
245[ 0.636664] ACPI: bus type PCI registered
246[ 0.640677] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
247[ 0.647276] PCI: Using configuration type 1 for base access
248[ 0.652848] PCI: Using configuration type 1 for extended access
249[ 0.659383] mtrr: your CPUs had inconsistent variable MTRR settings
250[ 0.665655] mtrr: probably your BIOS does not setup all CPUs.
251[ 0.671405] mtrr: corrected configuration.
252[ 0.689409] ACPI: Added _OSI(Module Device)
253[ 0.693604] ACPI: Added _OSI(Processor Device)
254[ 0.698055] ACPI: Added _OSI(3.0 _SCP Extensions)
255[ 0.702759] ACPI: Added _OSI(Processor Aggregator Device)
256[ 0.711738] ACPI: Interpreter enabled
257[ 0.715421] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
258[ 0.724685] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
259[ 0.733951] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
260[ 0.743222] ACPI: (supports S0 S1 S5)
261[ 0.746892] ACPI: Using IOAPIC for interrupt routing
262[ 0.751904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
263[ 0.779777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
264[ 0.785963] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
265[ 0.794173] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
266[ 0.831859] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
267[ 0.841920] PCI host bridge to bus 0000:00
268[ 0.846025] pci_bus 0000:00: root bus resource [bus 00-05]
269[ 0.851515] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
270[ 0.857693] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
271[ 0.864572] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.871450] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.878323] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.884519] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.884713] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.884721] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.884855] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.884866] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.884890] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.884917] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.884966] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.885063] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.885075] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.885111] pci 0000:00:02.0: supports D1 D2
285[ 0.885120] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.885185] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.890908] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.890923] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.890964] pci 0000:00:02.1: supports D1 D2
290[ 0.890966] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.891013] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.896734] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.896761] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.896789] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.903922] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.910455] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.917592] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.924224] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.924233] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.924238] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.924243] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.924247] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.924252] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.924257] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.924351] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.924359] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.924371] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.924383] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.924388] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.924403] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.924416] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.924529] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.924654] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.930381] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.930430] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.930479] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.936201] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.936253] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.936313] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.942045] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.942095] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.942148] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.947872] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.947914] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.947970] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.953702] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.953863] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.954007] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.954114] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.954261] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.954369] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.954485] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.954646] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.954787] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.954994] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.955171] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.955199] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.955208] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.955215] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.955262] pci 0000:01:04.0: supports D1 D2
341[ 0.955355] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.960325] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.960328] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.960331] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.960449] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.960481] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.960518] pci 0000:02:00.0: reg 0x30: [mem 0x21400000-0x2140ffff pref]
348[ 0.960597] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.960706] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.970707] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.975677] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.975786] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.975808] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.975907] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.975984] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.985981] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.990950] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.991024] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.996061] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.001065] pci_bus 0000:00: on NUMA node 0
361[ 1.001166] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.007330] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.013474] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.020778] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.028070] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.035372] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.042677] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.048818] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.054963] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.062279] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.069613] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.076910] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.083070] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.089241] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.096550] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.103849] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.111157] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.119732] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.126225] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.132703] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.139169] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.145903] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.151015] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.156685] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.164781] vgaarb: loaded
386[ 1.167496] vgaarb: bridge control possible 0000:01:04.0
387[ 1.172973] PCI: Using ACPI for IRQ routing
388[ 1.177169] PCI: pci_cache_line_size set to 64 bytes
389[ 1.177227] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.177231] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.177551] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.184603] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.189655] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.198313] Switched to clocksource hpet
395[ 1.213798] pnp: PnP ACPI init
396[ 1.216914] ACPI: bus type PNP registered
397[ 1.221477] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.221556] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.221655] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.221733] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.221773] pnp 00:04: [dma 2]
402[ 1.221816] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.221837] pnp: PnP ACPI: found 5 devices
404[ 1.225945] ACPI: bus type PNP unregistered
405[ 1.237966] pci 0000:02:00.0: can't claim BAR 6 [mem 0x21400000-0x2140ffff pref]: no compatible bridge window
406[ 1.247922] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.252899] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.258998] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.265790] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.273021] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.280250] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.285222] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.292018] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.296986] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.303784] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.308754] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.313728] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.313731] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
419[ 1.313733] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
420[ 1.313736] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
421[ 1.313739] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
422[ 1.313742] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
423[ 1.313744] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
424[ 1.313747] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
425[ 1.313750] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
426[ 1.313753] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
427[ 1.313882] NET: Registered protocol family 2
428[ 1.318762] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
429[ 1.326454] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
430[ 1.333790] TCP: Hash tables configured (established 65536 bind 65536)
431[ 1.340398] TCP: reno registered
432[ 1.343659] UDP hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.349871] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
434[ 1.356665] NET: Registered protocol family 1
435[ 1.361408] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
436[ 1.367489] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
437[ 1.373398] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.378936] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.384440] pci 0000:00:0b.0: Found disabled HT MSI Mapping
440[ 1.390022] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.395558] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.401049] pci 0000:00:0c.0: Found disabled HT MSI Mapping
443[ 1.406632] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.412175] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.417665] pci 0000:00:0d.0: Found disabled HT MSI Mapping
446[ 1.423245] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.428787] pci 0000:00:00.0: Found enabled HT MSI Mapping
448[ 1.434288] pci 0000:00:0e.0: Found disabled HT MSI Mapping
449[ 1.439875] pci 0000:00:00.0: Found enabled HT MSI Mapping
450[ 1.445403] pci 0000:01:04.0: Video device with shadowed ROM
451[ 1.445412] PCI: CLS 64 bytes, default 64
452[ 1.445520] Unpacking initramfs...
453[ 1.678485] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
454[ 1.686348] PCI-DMA: Disabling AGP.
455[ 1.691427] PCI-DMA: aperture base @ b4000000 size 65536 KB
456[ 1.697007] PCI-DMA: using GART IOMMU.
457[ 1.700767] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
458[ 1.712819] platform rtc_cmos: registered platform RTC device (no PNP device found)
459[ 1.721003] microcode: CPU0: patch_level=0x00000000
460[ 1.725893] microcode: CPU1: patch_level=0x00000000
461[ 1.730788] microcode: CPU2: patch_level=0x00000000
462[ 1.735691] microcode: CPU3: patch_level=0x00000000
463[ 1.740600] microcode: CPU4: patch_level=0x01000096
464[ 1.745495] microcode: CPU5: patch_level=0x00000000
465[ 1.750397] microcode: CPU6: patch_level=0x00000000
466[ 1.755293] microcode: CPU7: patch_level=0x00000000
467[ 1.760281] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
468[ 1.769086] LVT offset 1 assigned for vector 0x400
469[ 1.773901] IBS: LVT offset 1 assigned
470[ 1.777698] perf: AMD IBS detected (0x00000007)
471[ 1.782856] futex hash table entries: 2048 (order: 5, 131072 bytes)
472[ 1.789239] audit: initializing netlink subsys (disabled)
473[ 1.794671] audit: type=2000 audit(1445190092.616:1): initialized
474[ 1.801543] HugeTLB registered 2 MB page size, pre-allocated 0 pages
475[ 1.807945] zbud: loaded
476[ 1.810837] VFS: Disk quotas dquot_6.5.2
477[ 1.814807] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
478[ 1.821352] msgmni has been set to 9945
479[ 1.825725] alg: No test for stdrng (krng)
480[ 1.829884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
481[ 1.837383] io scheduler noop registered
482[ 1.841319] io scheduler deadline registered
483[ 1.845679] io scheduler cfq registered (default)
484[ 1.850599] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
485[ 1.850725] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
486[ 1.850851] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
487[ 1.850963] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
488[ 1.851126] aer 0000:00:0b.0:pcie02: service driver aer loaded
489[ 1.851154] aer 0000:00:0c.0:pcie02: service driver aer loaded
490[ 1.851180] aer 0000:00:0d.0:pcie02: service driver aer loaded
491[ 1.851205] aer 0000:00:0e.0:pcie02: service driver aer loaded
492[ 1.851225] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
493[ 1.858199] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
494[ 1.864736] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
495[ 1.864746] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
496[ 1.871708] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
497[ 1.878241] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
498[ 1.878252] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
499[ 1.885214] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
500[ 1.885225] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
501[ 1.892189] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
502[ 1.892221] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
503[ 1.897827] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
504[ 1.904578] GHES: HEST is not enabled!
505[ 1.908465] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
506[ 1.935062] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
507[ 1.962804] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
508[ 1.970736] Linux agpgart interface v0.103
509[ 1.975053] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
510[ 1.985547] serio: i8042 KBD port at 0x60,0x64 irq 1
511[ 1.990608] serio: i8042 AUX port at 0x60,0x64 irq 12
512[ 1.995893] mousedev: PS/2 mouse device common for all mice
513[ 2.001565] rtc_cmos rtc_cmos: RTC can wake from S4
514[ 2.006685] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
515[ 2.013077] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
516[ 2.020937] ledtrig-cpu: registered to indicate activity on CPUs
517[ 2.027141] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
518[ 2.033590] AMD IOMMUv2 functionality not available on this system
519[ 2.039941] TCP: cubic registered
520[ 2.043401] NET: Registered protocol family 10
521[ 2.048229] mip6: Mobile IPv6
522[ 2.049802] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.059819] NET: Registered protocol family 17
524[ 2.064272] mpls_gso: MPLS GSO support
525[ 2.068863] registered taskstats version 1
526[ 2.073736] rtc_cmos rtc_cmos: setting system clock to 2015-10-18 17:41:34 UTC (1445190094)
527[ 2.082165] PM: Hibernation image not present or could not be loaded.
528[ 2.083970] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
529[ 2.091821] Write protecting the kernel read-only data: 8192k
530[ 2.101035] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
531[ 2.109630] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
532[ 2.133534] systemd-udevd[98]: starting version 215
533[ 2.139338] random: systemd-udevd urandom read with 4 bits of entropy available
534[ 2.170761] pps_core: LinuxPPS API ver. 1 registered
535[ 2.175748] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.185339] ACPI: bus type USB registered
537[ 2.189557] usbcore: registered new interface driver usbfs
538[ 2.189609] PTP clock support registered
539[ 2.199082] usbcore: registered new interface driver hub
540[ 2.204693] usbcore: registered new device driver usb
541[ 2.204788] tg3.c:v3.137 (May 11, 2014)
542[ 2.204801] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.205013] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
544[ 2.226083] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
545[ 2.233325] ehci-pci: EHCI PCI platform driver
546[ 2.238027] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
547[ 2.238081] ehci-pci 0000:00:02.1: EHCI Host Controller
548[ 2.238100] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
549[ 2.238117] ehci-pci 0000:00:02.1: debug port 1
550[ 2.238167] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
551[ 2.238193] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
552[ 2.249969] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
553[ 2.250059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
554[ 2.250060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
555[ 2.250062] usb usb1: Product: EHCI Host Controller
556[ 2.250063] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
557[ 2.250065] usb usb1: SerialNumber: 0000:00:02.1
558[ 2.250290] hub 1-0:1.0: USB hub found
559[ 2.250300] hub 1-0:1.0: 10 ports detected
560[ 2.310818] ohci-pci: OHCI PCI platform driver
561[ 2.315536] ohci-pci 0000:00:02.0: OHCI PCI host controller
562[ 2.321145] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
563[ 2.328590] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
564[ 2.333405] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
565[ 2.333408] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
566[ 2.333411] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
567[ 2.333412] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
568[ 2.333538] tg3 0000:03:00.0: enabling device (0004 -> 0006)
569[ 2.333705] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
570[ 2.422451] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
571[ 2.432718] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
572[ 2.435966] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
573[ 2.435968] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
574[ 2.435969] usb usb2: Product: OHCI PCI host controller
575[ 2.435971] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
576[ 2.435972] usb usb2: SerialNumber: 0000:00:02.0
577[ 2.436177] hub 2-0:1.0: USB hub found
578[ 2.436186] hub 2-0:1.0: 10 ports detected
579[ 2.480236] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
580[ 2.488089] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
581[ 2.501593] FS-Cache: Loaded
582[ 2.508691] RPC: Registered named UNIX socket transport module.
583[ 2.515307] RPC: Registered udp transport module.
584[ 2.521388] RPC: Registered tcp transport module.
585[ 2.527482] RPC: Registered tcp NFSv4.1 backchannel transport module.
586[ 2.539948] FS-Cache: Netfs 'nfs' registered for caching
587[ 2.554480] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
588[ 2.601969] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
589[ 2.709811] tsc: Refined TSC clocksource calibration: 1909.786 MHz
590[ 3.713553] Switched to clocksource tsc
591[ 4.258519] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
592[ 4.265051] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
593[ 4.271938] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
594[ 10.789687] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
595[ 10.803397] systemd[1]: Detected architecture 'x86-64'.
596[ 13.582024] random: nonblocking pool is initialized
597[ 13.710569] systemd[1]: Inserted module 'autofs4'
598[ 13.720092] systemd[1]: Set hostname to <cb-test-tgt>.
599[ 18.449345] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
600[ 18.462059] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
601[ 18.477441] systemd[1]: Expecting device dev-ttyS0.device...
602[ 18.492398] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
603[ 18.500114] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
604[ 18.507706] systemd[1]: Starting Remote File Systems (Pre).
605[ 18.524461] systemd[1]: Reached target Remote File Systems (Pre).
606[ 18.530650] systemd[1]: Starting Encrypted Volumes.
607[ 18.544451] systemd[1]: Reached target Encrypted Volumes.
608[ 18.550024] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
609[ 18.558123] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
610[ 18.566065] systemd[1]: Starting Paths.
611[ 18.580355] systemd[1]: Reached target Paths.
612[ 18.584766] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
613[ 18.608352] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
614[ 18.617785] systemd[1]: Starting Swap.
615[ 18.632338] systemd[1]: Reached target Swap.
616[ 18.636643] systemd[1]: Starting Root Slice.
617[ 18.648332] systemd[1]: Created slice Root Slice.
618[ 18.653062] systemd[1]: Starting User and Session Slice.
619[ 18.668315] systemd[1]: Created slice User and Session Slice.
620[ 18.674080] systemd[1]: Starting Delayed Shutdown Socket.
621[ 18.688303] systemd[1]: Listening on Delayed Shutdown Socket.
622[ 18.694079] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
623[ 18.740284] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
624[ 18.747265] systemd[1]: Starting Journal Socket (/dev/log).
625[ 18.828254] systemd[1]: Listening on Journal Socket (/dev/log).
626[ 18.834202] systemd[1]: Starting udev Kernel Socket.
627[ 18.848249] systemd[1]: Listening on udev Kernel Socket.
628[ 18.853587] systemd[1]: Starting udev Control Socket.
629[ 18.868240] systemd[1]: Listening on udev Control Socket.
630[ 18.873674] systemd[1]: Starting Journal Socket.
631[ 18.888233] systemd[1]: Listening on Journal Socket.
632[ 18.893240] systemd[1]: Starting System Slice.
633[ 18.908226] systemd[1]: Created slice System Slice.
634[ 18.913130] systemd[1]: Starting system-getty.slice.
635[ 18.928237] systemd[1]: Created slice system-getty.slice.
636[ 18.933662] systemd[1]: Starting system-serial\x2dgetty.slice.
637[ 18.948232] systemd[1]: Created slice system-serial\x2dgetty.slice.
638[ 18.954565] systemd[1]: Starting Increase datagram queue length...
639[ 18.973288] systemd[1]: Mounting Debug File System...
640[ 18.989082] systemd[1]: Mounting POSIX Message Queue File System...
641[ 20.084921] systemd[1]: Starting Load Kernel Modules...
642[ 22.314377] systemd[1]: Started Set Up Additional Binary Formats.
643[ 22.519056] systemd[1]: Starting Create list of required static device nodes for the current kernel...
644[ 22.544098] systemd[1]: Starting udev Coldplug all Devices...
645[ 22.559963] systemd[1]: Mounting Huge Pages File System...
646[ 22.575911] systemd[1]: Starting Slices.
647[ 22.586967] systemd[1]: Reached target Slices.
648[ 22.591475] systemd[1]: Starting Remount Root and Kernel File Systems...
649[ 26.265792] systemd[1]: Started Increase datagram queue length.
650[ 26.272271] systemd[1]: Starting Syslog Socket.
651[ 26.285751] systemd[1]: Listening on Syslog Socket.
652[ 26.290744] systemd[1]: Starting Sockets.
653[ 26.305680] systemd[1]: Reached target Sockets.
654[ 26.310257] systemd[1]: Starting Journal Service...
655[ 26.333723] systemd[1]: Started Journal Service.
656[ 38.361615] systemd-udevd[189]: starting version 215
657[ 38.440445] systemd-journald[171]: Received request to flush runtime journal from PID 1
658[ 51.760836] nfs: server 10.100.1.1 not responding, still trying
659[ 51.766780] nfs: server 10.100.1.1 not responding, still trying
660[ 51.772721] nfs: server 10.100.1.1 not responding, still trying
661[ 51.778566] nfs: server 10.100.1.1 not responding, still trying
662[ 51.784501] nfs: server 10.100.1.1 not responding, still trying
663[ 51.790438] nfs: server 10.100.1.1 not responding, still trying
664[ 51.796370] nfs: server 10.100.1.1 not responding, still trying
665[ 51.803692] nfs: server 10.100.1.1 not responding, still trying
666[ 51.810735] nfs: server 10.100.1.1 not responding, still trying
667[ 51.818070] nfs: server 10.100.1.1 not responding, still trying
668[ 51.825382] nfs: server 10.100.1.1 not responding, still trying
669[ 51.832691] nfs: server 10.100.1.1 not responding, still trying
670[ 51.839994] nfs: server 10.100.1.1 not responding, still trying
671[ 51.846439] nfs: server 10.100.1.1 not responding, still trying
672[ 51.852373] nfs: server 10.100.1.1 not responding, still trying
673[ 51.858309] nfs: server 10.100.1.1 not responding, still trying
674[ 51.864238] nfs: server 10.100.1.1 not responding, still trying
675[ 51.870164] nfs: server 10.100.1.1 not responding, still trying
676[ 51.876093] nfs: server 10.100.1.1 not responding, still trying
677[ 51.882027] nfs: server 10.100.1.1 not responding, still trying
678[ 51.887958] nfs: server 10.100.1.1 not responding, still trying
679[ 51.893887] nfs: server 10.100.1.1 not responding, still trying
680[ 51.899819] nfs: server 10.100.1.1 not responding, still trying
681[ 51.905746] nfs: server 10.100.1.1 not responding, still trying
682[ 51.911681] nfs: server 10.100.1.1 not responding, still trying
683[ 51.917614] nfs: server 10.100.1.1 not responding, still trying
684[ 51.923551] nfs: server 10.100.1.1 not responding, still trying
685[ 51.929488] nfs: server 10.100.1.1 not responding, still trying
686[ 51.935420] nfs: server 10.100.1.1 not responding, still trying
687[ 51.941355] nfs: server 10.100.1.1 not responding, still trying
688[ 51.947287] nfs: server 10.100.1.1 not responding, still trying
689[ 51.953213] nfs: server 10.100.1.1 not responding, still trying
690[ 51.959141] nfs: server 10.100.1.1 not responding, still trying
691[ 51.965078] nfs: server 10.100.1.1 not responding, still trying
692[ 51.971011] nfs: server 10.100.1.1 not responding, still trying
693[ 51.976945] nfs: server 10.100.1.1 not responding, still trying
694[ 51.982879] nfs: server 10.100.1.1 not responding, still trying
695[ 51.988813] nfs: server 10.100.1.1 not responding, still trying
696[ 51.994749] nfs: server 10.100.1.1 not responding, still trying
697[ 52.000683] nfs: server 10.100.1.1 not responding, still trying
698[ 52.006616] nfs: server 10.100.1.1 not responding, still trying
699[ 52.012542] nfs: server 10.100.1.1 not responding, still trying
700[ 52.018473] nfs: server 10.100.1.1 not responding, still trying
701[ 52.024404] nfs: server 10.100.1.1 not responding, still trying
702[ 52.030340] nfs: server 10.100.1.1 not responding, still trying
703[ 52.036273] nfs: server 10.100.1.1 not responding, still trying
704[ 52.042208] nfs: server 10.100.1.1 not responding, still trying
705[ 52.048143] nfs: server 10.100.1.1 not responding, still trying
706[ 52.054078] nfs: server 10.100.1.1 not responding, still trying
707[ 52.060011] nfs: server 10.100.1.1 not responding, still trying
708[ 52.065938] nfs: server 10.100.1.1 not responding, still trying
709[ 52.071873] nfs: server 10.100.1.1 not responding, still trying
710[ 52.077804] nfs: server 10.100.1.1 not responding, still trying
711[ 52.083733] nfs: server 10.100.1.1 not responding, still trying
712[ 52.089665] nfs: server 10.100.1.1 not responding, still trying
713[ 52.095593] nfs: server 10.100.1.1 not responding, still trying
714[ 52.101528] nfs: server 10.100.1.1 not responding, still trying
715[ 52.107462] nfs: server 10.100.1.1 not responding, still trying
716[ 52.113396] nfs: server 10.100.1.1 not responding, still trying
717[ 52.119322] nfs: server 10.100.1.1 not responding, still trying
718[ 52.125247] nfs: server 10.100.1.1 not responding, still trying
719[ 52.131175] nfs: server 10.100.1.1 not responding, still trying
720[ 52.137109] nfs: server 10.100.1.1 not responding, still trying
721[ 52.143034] nfs: server 10.100.1.1 not responding, still trying
722[ 52.143565] nfs: server 10.100.1.1 OK
723[ 52.145667] nfs: server 10.100.1.1 OK
724[ 52.156293] nfs: server 10.100.1.1 not responding, still trying
725[ 52.162225] nfs: server 10.100.1.1 not responding, still trying
726[ 52.168160] nfs: server 10.100.1.1 not responding, still trying
727[ 52.174085] nfs: server 10.100.1.1 not responding, still trying
728[ 52.180010] nfs: server 10.100.1.1 not responding, still trying
729[ 52.218502] nfs: server 10.100.1.1 OK
730[ 52.224987] nfs: server 10.100.1.1 OK
731[ 52.228702] nfs: server 10.100.1.1 OK
732[ 52.232412] nfs: server 10.100.1.1 OK
733[ 52.236139] nfs: server 10.100.1.1 OK
734[ 52.239865] nfs: server 10.100.1.1 OK
735[ 52.243560] nfs: server 10.100.1.1 OK
736[ 52.247242] nfs: server 10.100.1.1 OK
737[ 52.250922] nfs: server 10.100.1.1 OK
738[ 52.254596] nfs: server 10.100.1.1 OK
739[ 52.258267] nfs: server 10.100.1.1 OK
740[ 52.261943] nfs: server 10.100.1.1 OK
741[ 52.265614] nfs: server 10.100.1.1 OK
742[ 52.269287] nfs: server 10.100.1.1 OK
743[ 52.272991] nfs: server 10.100.1.1 OK
744[ 52.276721] nfs: server 10.100.1.1 OK
745[ 52.281782] nfs: server 10.100.1.1 OK
746[ 52.285494] nfs: server 10.100.1.1 OK
747[ 52.289215] nfs: server 10.100.1.1 OK
748[ 52.292903] nfs: server 10.100.1.1 OK
749[ 52.296576] nfs: server 10.100.1.1 OK
750[ 52.300254] nfs: server 10.100.1.1 OK
751[ 52.303926] nfs: server 10.100.1.1 OK
752[ 52.307599] nfs: server 10.100.1.1 OK
753[ 52.312437] nfs: server 10.100.1.1 OK
754[ 52.317208] nfs: server 10.100.1.1 OK
755[ 52.320912] nfs: server 10.100.1.1 OK
756[ 52.324630] nfs: server 10.100.1.1 OK
757[ 52.328321] nfs: server 10.100.1.1 OK
758[ 52.332021] nfs: server 10.100.1.1 OK
759[ 52.335701] nfs: server 10.100.1.1 OK
760[ 52.339379] nfs: server 10.100.1.1 OK
761[ 52.343064] nfs: server 10.100.1.1 OK
762[ 52.346743] nfs: server 10.100.1.1 OK
763[ 52.350441] nfs: server 10.100.1.1 OK
764[ 52.354164] nfs: server 10.100.1.1 OK
765[ 52.357868] nfs: server 10.100.1.1 OK
766[ 52.361542] nfs: server 10.100.1.1 OK
767[ 52.365222] nfs: server 10.100.1.1 OK
768[ 52.368894] nfs: server 10.100.1.1 OK
769[ 52.372577] nfs: server 10.100.1.1 OK
770[ 52.374700] nfs: server 10.100.1.1 OK
771[ 52.379365] nfs: server 10.100.1.1 OK
772[ 52.383586] nfs: server 10.100.1.1 OK
773[ 52.387268] nfs: server 10.100.1.1 OK
774[ 52.390943] nfs: server 10.100.1.1 OK
775[ 52.394617] nfs: server 10.100.1.1 OK
776[ 52.398337] nfs: server 10.100.1.1 OK
777[ 52.402030] nfs: server 10.100.1.1 OK
778[ 52.405709] nfs: server 10.100.1.1 OK
779[ 52.409384] nfs: server 10.100.1.1 OK
780[ 52.413096] nfs: server 10.100.1.1 OK
781[ 52.414037] nfs: server 10.100.1.1 OK
782[ 52.415123] nfs: server 10.100.1.1 OK
783[ 52.416852] nfs: server 10.100.1.1 OK
784[ 52.417974] nfs: server 10.100.1.1 OK
785[ 52.419016] nfs: server 10.100.1.1 OK
786[ 52.422758] nfs: server 10.100.1.1 OK
787[ 52.424360] nfs: server 10.100.1.1 OK
788[ 52.425467] nfs: server 10.100.1.1 OK
789[ 52.446187] nfs: server 10.100.1.1 OK
790[ 52.451273] nfs: server 10.100.1.1 OK
791[ 52.456318] nfs: server 10.100.1.1 OK
792[ 52.461348] nfs: server 10.100.1.1 OK
793[ 52.466387] nfs: server 10.100.1.1 OK
794[ 52.471427] nfs: server 10.100.1.1 OK
795[ 52.476150] nfs: server 10.100.1.1 OK
796[ 52.732478] nfs: server 10.100.1.1 not responding, still trying
797[ 52.875269] nfs: server 10.100.1.1 OK
798[ 56.144806] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
799[ 56.290565] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
800[ 56.298386] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
801[ 56.332623] EDAC MC: Ver: 3.0.0
802[ 56.747852] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
803[ 56.756237] ACPI: Power Button [PWRB]
804[ 56.759987] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
805[ 56.767385] ACPI: Power Button [PWRF]
806[ 56.783350] MCE: In-kernel MCE decoding enabled.
807[ 57.102961] FDC 0 is a post-1991 82077
808[ 57.119372] AMD64 EDAC driver v3.4.0
809[ 57.123031] EDAC amd64: DRAM ECC enabled.
810[ 57.127061] EDAC amd64: F10h detected (node 0).
811[ 57.131613] EDAC MC: DCT0 chip selects:
812[ 57.131616] EDAC amd64: MC: 0: 0MB 1: 0MB
813[ 57.136327] EDAC amd64: MC: 2: 0MB 3: 0MB
814[ 57.141040] EDAC amd64: MC: 4: 0MB 5: 0MB
815[ 57.145752] EDAC amd64: MC: 6: 1024MB 7: 1024MB
816[ 57.150465] EDAC MC: DCT1 chip selects:
817[ 57.150467] EDAC amd64: MC: 0: 0MB 1: 0MB
818[ 57.155178] EDAC amd64: MC: 2: 0MB 3: 0MB
819[ 57.159891] EDAC amd64: MC: 4: 0MB 5: 0MB
820[ 57.164604] EDAC amd64: MC: 6: 1024MB 7: 1024MB
821[ 57.169317] EDAC amd64: using x4 syndromes.
822[ 57.173512] EDAC amd64: MCT channel count: 2
823[ 57.177912] EDAC amd64: CS6: Registered DDR2 RAM
824[ 57.182574] EDAC amd64: CS7: Registered DDR2 RAM
825[ 57.187491] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
826[ 57.197220] EDAC amd64: DRAM ECC enabled.
827[ 57.201263] EDAC amd64: F10h detected (node 1).
828[ 57.205838] EDAC MC: DCT0 chip selects:
829[ 57.205841] EDAC amd64: MC: 0: 1024MB 1: 0MB
830[ 57.210558] EDAC amd64: MC: 2: 0MB 3: 0MB
831[ 57.215271] EDAC amd64: MC: 4: 0MB 5: 0MB
832[ 57.219976] EDAC amd64: MC: 6: 0MB 7: 0MB
833[ 57.224686] EDAC MC: DCT1 chip selects:
834[ 57.224688] EDAC amd64: MC: 0: 0MB 1: 0MB
835[ 57.229400] EDAC amd64: MC: 2: 0MB 3: 0MB
836[ 57.234113] EDAC amd64: MC: 4: 0MB 5: 0MB
837[ 57.238826] EDAC amd64: MC: 6: 0MB 7: 0MB
838[ 57.243540] EDAC amd64: using x4 syndromes.
839[ 57.247732] EDAC amd64: MCT channel count: 1
840[ 57.252046] EDAC amd64: CS0: Registered DDR2 RAM
841[ 57.256846] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
842[ 57.266562] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
843[ 57.678248] SCSI subsystem initialized
844[ 57.702037] acpi-cpufreq: overriding BIOS provided _PSD data
845[ 57.738719] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
846[ 57.744070] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
847[ 58.232234] libata version 3.00 loaded.
848[ 58.934547] sata_nv 0000:00:07.0: version 3.5
849[ 58.934932] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
850[ 58.941323] input: PC Speaker as /devices/platform/pcspkr/input/input5
851[ 58.941763] scsi0 : sata_nv
852[ 58.951284] scsi1 : sata_nv
853[ 58.954263] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
854[ 58.961424] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
855[ 58.968932] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
856[ 58.975192] scsi2 : sata_nv
857[ 58.978391] scsi3 : sata_nv
858[ 58.981360] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
859[ 58.988518] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
860[ 58.995750] pata_amd 0000:00:06.0: version 0.4.1
861[ 58.996670] scsi4 : pata_amd
862[ 58.999841] scsi5 : pata_amd
863[ 59.002842] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
864[ 59.009814] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
865[ 59.278236] ata1: SATA link down (SStatus 0 SControl 300)
866[ 59.306226] ata3: SATA link down (SStatus 0 SControl 300)
867[ 59.594124] ata2: SATA link down (SStatus 0 SControl 300)
868[ 59.910039] ata4: SATA link down (SStatus 0 SControl 300)
869[ 60.169486] kvm: Nested Virtualization enabled
870[ 60.173990] kvm: Nested Paging enabled
871[ 98.306826] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
872[ 210.392843] nfs: server 10.100.1.1 not responding, still trying
873[ 211.872087] nfs: server 10.100.1.1 OK
874[ 567.356986] nfs: server 10.100.1.1 not responding, still trying
875[ 569.204590] nfs: server 10.100.1.1 OK