blob: 4f30b273d110c66e58e83895e33aeb482d40631e [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand4d795982015-10-01 16:12:34 +00001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-658-gca97fa7-dirty 10/01/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [ttyS0] enabled
182[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
183[ 0.000000] hpet clockevent registered
184[ 0.000000] tsc: Fast TSC calibration using PIT
185[ 0.000000] tsc: Detected 1909.876 MHz processor
186[ 0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.75 BogoMIPS (lpj=7639504)
187[ 0.010795] pid_max: default: 32768 minimum: 301
188[ 0.015450] ACPI: Core revision 20140424
189[ 0.021788] ACPI: All ACPI Tables successfully acquired
190[ 0.027155] Security Framework initialized
191[ 0.031281] AppArmor: AppArmor disabled by boot time parameter
192[ 0.037116] Yama: disabled by default; enable with sysctl kernel.yama.*
193[ 0.044858] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
194[ 0.058095] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
195[ 0.067862] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
196[ 0.074765] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.082617] Initializing cgroup subsys memory
198[ 0.086994] Initializing cgroup subsys devices
199[ 0.091456] Initializing cgroup subsys freezer
200[ 0.095918] Initializing cgroup subsys net_cls
201[ 0.100375] Initializing cgroup subsys blkio
202[ 0.104664] Initializing cgroup subsys perf_event
203[ 0.109381] Initializing cgroup subsys net_prio
204[ 0.113961] tseg: 0000000000
205[ 0.113975] CPU: Physical Processor ID: 0
206[ 0.117992] CPU: Processor Core ID: 0
207[ 0.121664] mce: CPU supports 6 MCE banks
208[ 0.125694] LVT offset 0 assigned for vector 0xf9
209[ 0.130422] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
210Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
211tlb_flushall_shift: 6
212[ 0.145763] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
213[ 0.154775] ftrace: allocating 21601 entries in 85 pages
214[ 0.170139] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
215[ 0.215657] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
216[ 0.332510] Performance Events: AMD PMU driver.
217[ 0.337081] ... version: 0
218[ 0.341094] ... bit width: 48
219[ 0.345191] ... generic registers: 4
220[ 0.349203] ... value mask: 0000ffffffffffff
221[ 0.354513] ... max period: 00007fffffffffff
222[ 0.359823] ... fixed-purpose events: 0
223[ 0.363852] ... event mask: 000000000000000f
224[ 0.371768] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
225[ 0.379967] x86: Booting SMP configuration:
226[ 0.384158] .... node #0, CPUs: #1 #2 #3
227[ 0.428504] .... node #1, CPUs: #4 #5 #6 #7
228[ 0.581174] x86: Booted up 2 nodes, 8 CPUs
229[ 0.585474] smpboot: Total of 8 processors activated (30558.21 BogoMIPS)
230[ 0.598041] devtmpfs: initialized
231[ 0.609945] pinctrl core: initialized pinctrl subsystem
232[ 0.615338] NET: Registered protocol family 16
233[ 0.619999] cpuidle: using governor ladder
234[ 0.624106] cpuidle: using governor menu
235[ 0.628035] node 0 link 1: io port [1000, 3fff]
236[ 0.628038] TOM: 00000000c0000000 aka 3072M
237[ 0.632231] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
238[ 0.632235] node 0 link 1: mmio [fc000000, fc3fffff]
239[ 0.632238] node 0 link 1: mmio [f8000000, fbffffff]
240[ 0.632241] TOM2: 0000000180000000 aka 6144M
241[ 0.636519] bus: [bus 00-05] on node 0 link 1
242[ 0.636521] bus: 00 [io 0x0000-0xffff]
243[ 0.636522] bus: 00 [mem 0xd0000000-0xffffffff]
244[ 0.636524] bus: 00 [mem 0x180000000-0xfcffffffff]
245[ 0.636631] ACPI: bus type PCI registered
246[ 0.640653] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
247[ 0.647248] PCI: Using configuration type 1 for base access
248[ 0.652823] PCI: Using configuration type 1 for extended access
249[ 0.659357] mtrr: your CPUs had inconsistent variable MTRR settings
250[ 0.665628] mtrr: probably your BIOS does not setup all CPUs.
251[ 0.671380] mtrr: corrected configuration.
252[ 0.685278] ACPI: Added _OSI(Module Device)
253[ 0.689473] ACPI: Added _OSI(Processor Device)
254[ 0.693924] ACPI: Added _OSI(3.0 _SCP Extensions)
255[ 0.698636] ACPI: Added _OSI(Processor Aggregator Device)
256[ 0.707569] ACPI: Interpreter enabled
257[ 0.711256] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
258[ 0.720520] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
259[ 0.729775] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
260[ 0.739047] ACPI: (supports S0 S1 S5)
261[ 0.742717] ACPI: Using IOAPIC for interrupt routing
262[ 0.747725] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
263[ 0.775721] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
264[ 0.781909] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
265[ 0.790122] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
266[ 0.826908] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
267[ 0.836932] PCI host bridge to bus 0000:00
268[ 0.841034] pci_bus 0000:00: root bus resource [bus 00-05]
269[ 0.846526] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
270[ 0.852711] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
271[ 0.859580] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.866442] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.873313] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.879502] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.879680] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.879687] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.879864] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.879876] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.879899] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.879919] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.879939] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.880043] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.880054] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.880080] pci 0000:00:02.0: supports D1 D2
285[ 0.880099] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.880173] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.885890] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.885905] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.885958] pci 0000:00:02.1: supports D1 D2
290[ 0.885965] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.886019] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.891747] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.891781] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.891802] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.898941] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.905473] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.912611] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.919247] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.919263] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.919275] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.919280] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.919285] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.919289] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.919294] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.919461] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.919468] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.919480] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.919500] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.919504] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.919519] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.919538] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.919668] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.919784] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.925501] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.925550] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.925604] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.931324] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.931377] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.931466] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.937186] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.937236] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.937291] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.943012] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.943062] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.943125] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.948856] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.948964] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.949091] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.949209] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.949344] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.949477] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.949620] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.949757] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.949885] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.950019] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.950220] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.950239] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.950249] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.950255] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.950294] pci 0000:01:04.0: supports D1 D2
341[ 0.950406] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.955377] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.955380] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.955383] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.955495] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.955537] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.955576] pci 0000:02:00.0: reg 0x30: [mem 0x21400000-0x2140ffff pref]
348[ 0.955663] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.955785] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.965787] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.970756] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.970861] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.970894] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.970996] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.971086] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.981078] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.986056] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.986131] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.991170] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 0.996170] pci_bus 0000:00: on NUMA node 0
361[ 0.996279] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.002434] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.008575] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.015924] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.023228] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.030551] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.037860] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.043998] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.050155] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.057473] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.064823] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.072134] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.078275] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.084449] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.091768] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.099079] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.106375] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.114926] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.121400] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.127888] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.134362] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.141143] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.146263] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.151928] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.160023] vgaarb: loaded
386[ 1.162740] vgaarb: bridge control possible 0000:01:04.0
387[ 1.168216] PCI: Using ACPI for IRQ routing
388[ 1.172414] PCI: pci_cache_line_size set to 64 bytes
389[ 1.172472] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.172475] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.172795] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.179846] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.184908] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.193589] Switched to clocksource hpet
395[ 1.209096] pnp: PnP ACPI init
396[ 1.212211] ACPI: bus type PNP registered
397[ 1.216774] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.216854] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.216951] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.217029] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.217069] pnp 00:04: [dma 2]
402[ 1.217111] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.217133] pnp: PnP ACPI: found 5 devices
404[ 1.221241] ACPI: bus type PNP unregistered
405[ 1.233259] pci 0000:02:00.0: can't claim BAR 6 [mem 0x21400000-0x2140ffff pref]: no compatible bridge window
406[ 1.243209] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.248185] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.254285] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.261077] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.268308] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.275538] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.280510] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.287304] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.292274] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.299071] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.304042] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.309019] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.309021] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
419[ 1.309024] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
420[ 1.309027] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
421[ 1.309029] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
422[ 1.309032] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
423[ 1.309035] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
424[ 1.309037] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
425[ 1.309040] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
426[ 1.309043] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
427[ 1.309167] NET: Registered protocol family 2
428[ 1.314041] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
429[ 1.321730] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
430[ 1.329063] TCP: Hash tables configured (established 65536 bind 65536)
431[ 1.335671] TCP: reno registered
432[ 1.338927] UDP hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.345141] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
434[ 1.351922] NET: Registered protocol family 1
435[ 1.356672] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
436[ 1.362753] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
437[ 1.368658] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.374197] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.379703] pci 0000:00:0b.0: Found disabled HT MSI Mapping
440[ 1.385290] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.390837] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.396345] pci 0000:00:0c.0: Found disabled HT MSI Mapping
443[ 1.401924] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.407465] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.412976] pci 0000:00:0d.0: Found disabled HT MSI Mapping
446[ 1.418560] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.424121] pci 0000:00:00.0: Found enabled HT MSI Mapping
448[ 1.429621] pci 0000:00:0e.0: Found disabled HT MSI Mapping
449[ 1.435211] pci 0000:00:00.0: Found enabled HT MSI Mapping
450[ 1.440741] pci 0000:01:04.0: Video device with shadowed ROM
451[ 1.440750] PCI: CLS 64 bytes, default 64
452[ 1.440859] Unpacking initramfs...
453[ 1.673698] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
454[ 1.681528] PCI-DMA: Disabling AGP.
455[ 1.686603] PCI-DMA: aperture base @ b4000000 size 65536 KB
456[ 1.692184] PCI-DMA: using GART IOMMU.
457[ 1.695942] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
458[ 1.707959] platform rtc_cmos: registered platform RTC device (no PNP device found)
459[ 1.716145] microcode: CPU0: patch_level=0x01000096
460[ 1.721035] microcode: CPU1: patch_level=0x01000096
461[ 1.725937] microcode: CPU2: patch_level=0x01000096
462[ 1.730839] microcode: CPU3: patch_level=0x01000096
463[ 1.735743] microcode: CPU4: patch_level=0x01000096
464[ 1.740634] microcode: CPU5: patch_level=0x01000096
465[ 1.745529] microcode: CPU6: patch_level=0x01000096
466[ 1.750423] microcode: CPU7: patch_level=0x01000096
467[ 1.755409] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
468[ 1.764208] LVT offset 1 assigned for vector 0x400
469[ 1.769022] IBS: LVT offset 1 assigned
470[ 1.772806] perf: AMD IBS detected (0x00000007)
471[ 1.777960] futex hash table entries: 2048 (order: 5, 131072 bytes)
472[ 1.784349] audit: initializing netlink subsys (disabled)
473[ 1.789774] audit: type=2000 audit(1443714898.508:1): initialized
474[ 1.796647] HugeTLB registered 2 MB page size, pre-allocated 0 pages
475[ 1.803051] zbud: loaded
476[ 1.805952] VFS: Disk quotas dquot_6.5.2
477[ 1.809923] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
478[ 1.816463] msgmni has been set to 9945
479[ 1.820829] alg: No test for stdrng (krng)
480[ 1.824988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
481[ 1.832483] io scheduler noop registered
482[ 1.836417] io scheduler deadline registered
483[ 1.840780] io scheduler cfq registered (default)
484[ 1.845699] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
485[ 1.845822] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
486[ 1.845935] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
487[ 1.846059] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
488[ 1.846219] aer 0000:00:0b.0:pcie02: service driver aer loaded
489[ 1.846248] aer 0000:00:0c.0:pcie02: service driver aer loaded
490[ 1.846274] aer 0000:00:0d.0:pcie02: service driver aer loaded
491[ 1.846301] aer 0000:00:0e.0:pcie02: service driver aer loaded
492[ 1.846320] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
493[ 1.853288] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
494[ 1.859822] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
495[ 1.859834] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
496[ 1.866795] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
497[ 1.873329] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
498[ 1.873340] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
499[ 1.880303] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
500[ 1.880314] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
501[ 1.887278] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
502[ 1.887306] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
503[ 1.892913] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
504[ 1.899648] GHES: HEST is not enabled!
505[ 1.903537] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
506[ 1.930128] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
507[ 1.957803] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
508[ 1.965736] Linux agpgart interface v0.103
509[ 1.970047] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
510[ 1.980411] serio: i8042 KBD port at 0x60,0x64 irq 1
511[ 1.985403] serio: i8042 AUX port at 0x60,0x64 irq 12
512[ 1.990687] mousedev: PS/2 mouse device common for all mice
513[ 1.996362] rtc_cmos rtc_cmos: RTC can wake from S4
514[ 2.001490] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
515[ 2.007889] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
516[ 2.015747] ledtrig-cpu: registered to indicate activity on CPUs
517[ 2.022019] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
518[ 2.028462] AMD IOMMUv2 functionality not available on this system
519[ 2.034831] TCP: cubic registered
520[ 2.038309] NET: Registered protocol family 10
521[ 2.043133] mip6: Mobile IPv6
522[ 2.044560] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.054717] NET: Registered protocol family 17
524[ 2.059179] mpls_gso: MPLS GSO support
525[ 2.063790] registered taskstats version 1
526[ 2.068656] rtc_cmos rtc_cmos: setting system clock to 2015-10-01 15:55:00 UTC (1443714900)
527[ 2.077075] PM: Hibernation image not present or could not be loaded.
528[ 2.078897] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
529[ 2.086744] Write protecting the kernel read-only data: 8192k
530[ 2.095962] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
531[ 2.104550] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
532[ 2.128468] systemd-udevd[99]: starting version 215
533[ 2.134263] random: systemd-udevd urandom read with 3 bits of entropy available
534[ 2.165633] pps_core: LinuxPPS API ver. 1 registered
535[ 2.170610] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.180163] ACPI: bus type USB registered
537[ 2.184383] usbcore: registered new interface driver usbfs
538[ 2.184436] PTP clock support registered
539[ 2.193904] usbcore: registered new interface driver hub
540[ 2.199487] usbcore: registered new device driver usb
541[ 2.199594] tg3.c:v3.137 (May 11, 2014)
542[ 2.199606] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.199814] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
544[ 2.220843] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
545[ 2.228127] ehci-pci: EHCI PCI platform driver
546[ 2.232816] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
547[ 2.232948] ehci-pci 0000:00:02.1: EHCI Host Controller
548[ 2.232969] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
549[ 2.232991] ehci-pci 0000:00:02.1: debug port 1
550[ 2.233038] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
551[ 2.233067] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
552[ 2.241248] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
553[ 2.241336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
554[ 2.241338] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
555[ 2.241340] usb usb1: Product: EHCI Host Controller
556[ 2.241341] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
557[ 2.241342] usb usb1: SerialNumber: 0000:00:02.1
558[ 2.241577] hub 1-0:1.0: USB hub found
559[ 2.241589] hub 1-0:1.0: 10 ports detected
560[ 2.305668] ohci-pci: OHCI PCI platform driver
561[ 2.310333] ohci-pci 0000:00:02.0: OHCI PCI host controller
562[ 2.315933] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
563[ 2.323376] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
564[ 2.340412] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
565[ 2.350678] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
566[ 2.360419] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
567[ 2.368250] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
568[ 2.375058] tg3 0000:03:00.0: enabling device (0004 -> 0006)
569[ 2.380888] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
570[ 2.383261] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
571[ 2.383263] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
572[ 2.383264] usb usb2: Product: OHCI PCI host controller
573[ 2.383266] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
574[ 2.383267] usb usb2: SerialNumber: 0000:00:02.0
575[ 2.383463] hub 2-0:1.0: USB hub found
576[ 2.383473] hub 2-0:1.0: 10 ports detected
577[ 2.469629] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
578[ 2.479893] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
579[ 2.489629] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
580[ 2.497459] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
581[ 2.510664] FS-Cache: Loaded
582[ 2.517776] RPC: Registered named UNIX socket transport module.
583[ 2.524379] RPC: Registered udp transport module.
584[ 2.530485] RPC: Registered tcp transport module.
585[ 2.536578] RPC: Registered tcp NFSv4.1 backchannel transport module.
586[ 2.548960] FS-Cache: Netfs 'nfs' registered for caching
587[ 2.563404] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
588[ 2.609242] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
589[ 2.705087] tsc: Refined TSC clocksource calibration: 1909.787 MHz
590[ 3.708828] Switched to clocksource tsc
591[ 4.229117] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
592[ 4.235648] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
593[ 4.242532] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
594[ 11.114455] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
595[ 11.128147] systemd[1]: Detected architecture 'x86-64'.
596[ 13.365468] random: nonblocking pool is initialized
597[ 14.277908] systemd[1]: Inserted module 'autofs4'
598[ 14.328248] systemd[1]: Set hostname to <cb-test-tgt>.
599[ 18.463300] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
600[ 18.476014] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
601[ 18.491416] systemd[1]: Expecting device dev-ttyS0.device...
602[ 18.507672] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
603[ 18.515390] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
604[ 18.522976] systemd[1]: Starting Remote File Systems (Pre).
605[ 18.539728] systemd[1]: Reached target Remote File Systems (Pre).
606[ 18.545900] systemd[1]: Starting Encrypted Volumes.
607[ 18.559633] systemd[1]: Reached target Encrypted Volumes.
608[ 18.565072] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
609[ 18.573165] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
610[ 18.581100] systemd[1]: Starting Paths.
611[ 18.595706] systemd[1]: Reached target Paths.
612[ 18.600176] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
613[ 18.623622] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
614[ 18.633044] systemd[1]: Starting Swap.
615[ 18.647613] systemd[1]: Reached target Swap.
616[ 18.651913] systemd[1]: Starting Root Slice.
617[ 18.663610] systemd[1]: Created slice Root Slice.
618[ 18.668350] systemd[1]: Starting User and Session Slice.
619[ 18.683598] systemd[1]: Created slice User and Session Slice.
620[ 18.689368] systemd[1]: Starting Delayed Shutdown Socket.
621[ 18.703579] systemd[1]: Listening on Delayed Shutdown Socket.
622[ 18.709347] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
623[ 18.727578] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
624[ 18.734557] systemd[1]: Starting Journal Socket (/dev/log).
625[ 18.755574] systemd[1]: Listening on Journal Socket (/dev/log).
626[ 18.761530] systemd[1]: Starting udev Kernel Socket.
627[ 18.775553] systemd[1]: Listening on udev Kernel Socket.
628[ 18.780888] systemd[1]: Starting udev Control Socket.
629[ 18.795547] systemd[1]: Listening on udev Control Socket.
630[ 18.800977] systemd[1]: Starting Journal Socket.
631[ 18.815543] systemd[1]: Listening on Journal Socket.
632[ 18.820552] systemd[1]: Starting System Slice.
633[ 18.835533] systemd[1]: Created slice System Slice.
634[ 18.840441] systemd[1]: Starting system-getty.slice.
635[ 18.855540] systemd[1]: Created slice system-getty.slice.
636[ 18.860966] systemd[1]: Starting system-serial\x2dgetty.slice.
637[ 18.875532] systemd[1]: Created slice system-serial\x2dgetty.slice.
638[ 18.881847] systemd[1]: Starting Increase datagram queue length...
639[ 18.900744] systemd[1]: Mounting Debug File System...
640[ 18.916526] systemd[1]: Mounting POSIX Message Queue File System...
641[ 19.003262] systemd[1]: Starting Load Kernel Modules...
642[ 19.472766] systemd[1]: Started Set Up Additional Binary Formats.
643[ 19.499836] systemd[1]: Starting Create list of required static device nodes for the current kernel...
644[ 19.524353] systemd[1]: Starting udev Coldplug all Devices...
645[ 19.540875] systemd[1]: Mounting Huge Pages File System...
646[ 19.556627] systemd[1]: Starting Slices.
647[ 19.571294] systemd[1]: Reached target Slices.
648[ 19.575790] systemd[1]: Starting Remount Root and Kernel File Systems...
649[ 21.682587] systemd[1]: Started Increase datagram queue length.
650[ 21.688962] systemd[1]: Starting Syslog Socket.
651[ 21.702627] systemd[1]: Listening on Syslog Socket.
652[ 21.707580] systemd[1]: Starting Sockets.
653[ 21.722604] systemd[1]: Reached target Sockets.
654[ 21.727208] systemd[1]: Starting Journal Service...
655[ 21.750577] systemd[1]: Started Journal Service.
656[ 27.257285] systemd-udevd[188]: starting version 215
657[ 27.290375] systemd-journald[172]: Received request to flush runtime journal from PID 1
658[ 39.068505] nfs: server 10.100.1.1 not responding, still trying
659[ 39.074454] nfs: server 10.100.1.1 not responding, still trying
660[ 39.080391] nfs: server 10.100.1.1 not responding, still trying
661[ 39.126240] nfs: server 10.100.1.1 OK
662[ 39.171722] nfs: server 10.100.1.1 OK
663[ 39.200300] nfs: server 10.100.1.1 OK
664[ 44.260099] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
665[ 44.267915] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
666[ 44.382423] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
667[ 45.296517] EDAC MC: Ver: 3.0.0
668[ 45.873700] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
669[ 45.882079] ACPI: Power Button [PWRB]
670[ 45.885832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
671[ 45.893233] ACPI: Power Button [PWRF]
672[ 46.285524] MCE: In-kernel MCE decoding enabled.
673[ 46.385964] FDC 0 is a post-1991 82077
674[ 46.792687] SCSI subsystem initialized
675[ 46.967310] AMD64 EDAC driver v3.4.0
676[ 46.970980] EDAC amd64: DRAM ECC enabled.
677[ 46.975008] EDAC amd64: F10h detected (node 0).
678[ 46.979564] EDAC MC: DCT0 chip selects:
679[ 46.979567] EDAC amd64: MC: 0: 0MB 1: 0MB
680[ 46.984283] EDAC amd64: MC: 2: 0MB 3: 0MB
681[ 46.989005] EDAC amd64: MC: 4: 0MB 5: 0MB
682[ 46.993717] EDAC amd64: MC: 6: 1024MB 7: 1024MB
683[ 46.998430] EDAC MC: DCT1 chip selects:
684[ 46.998432] EDAC amd64: MC: 0: 0MB 1: 0MB
685[ 47.003143] EDAC amd64: MC: 2: 0MB 3: 0MB
686[ 47.007896] EDAC amd64: MC: 4: 0MB 5: 0MB
687[ 47.012643] EDAC amd64: MC: 6: 1024MB 7: 1024MB
688[ 47.017390] EDAC amd64: using x4 syndromes.
689[ 47.021598] EDAC amd64: MCT channel count: 2
690[ 47.025927] EDAC amd64: CS6: Registered DDR2 RAM
691[ 47.030561] EDAC amd64: CS7: Registered DDR2 RAM
692[ 47.035440] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
693[ 47.045199] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
694[ 47.050392] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
695[ 47.055603] EDAC amd64: DRAM ECC enabled.
696[ 47.059681] EDAC amd64: F10h detected (node 1).
697[ 47.064271] EDAC MC: DCT0 chip selects:
698[ 47.064273] EDAC amd64: MC: 0: 1024MB 1: 0MB
699[ 47.068990] EDAC amd64: MC: 2: 0MB 3: 0MB
700[ 47.073701] EDAC amd64: MC: 4: 0MB 5: 0MB
701[ 47.078414] EDAC amd64: MC: 6: 0MB 7: 0MB
702[ 47.083126] EDAC MC: DCT1 chip selects:
703[ 47.083128] EDAC amd64: MC: 0: 0MB 1: 0MB
704[ 47.087840] EDAC amd64: MC: 2: 0MB 3: 0MB
705[ 47.092552] EDAC amd64: MC: 4: 0MB 5: 0MB
706[ 47.097265] EDAC amd64: MC: 6: 0MB 7: 0MB
707[ 47.101979] EDAC amd64: using x4 syndromes.
708[ 47.106171] EDAC amd64: MCT channel count: 1
709[ 47.110487] EDAC amd64: CS0: Registered DDR2 RAM
710[ 47.115290] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
711[ 47.125038] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
712[ 47.174956] input: PC Speaker as /devices/platform/pcspkr/input/input4
713[ 47.469478] libata version 3.00 loaded.
714[ 47.557080] acpi-cpufreq: overriding BIOS provided _PSD data
715[ 48.466748] sata_nv 0000:00:07.0: version 3.5
716[ 48.467123] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
717[ 48.473696] scsi0 : sata_nv
718[ 48.476733] scsi1 : sata_nv
719[ 48.479613] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
720[ 48.486758] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
721[ 48.494088] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
722[ 48.500313] scsi2 : sata_nv
723[ 48.503308] scsi3 : sata_nv
724[ 48.506185] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
725[ 48.513328] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
726[ 48.805156] ata1: SATA link down (SStatus 0 SControl 300)
727[ 48.829153] ata3: SATA link down (SStatus 0 SControl 300)
728[ 49.121050] ata2: SATA link down (SStatus 0 SControl 300)
729[ 49.436935] ata4: SATA link down (SStatus 0 SControl 300)
730[ 49.554281] pata_amd 0000:00:06.0: version 0.4.1
731[ 49.555236] scsi4 : pata_amd
732[ 49.558425] scsi5 : pata_amd
733[ 49.561433] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
734[ 49.568405] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
735[ 49.617576] kvm: Nested Virtualization enabled
736[ 49.622052] kvm: Nested Paging enabled
737[ 94.039201] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
738[ 483.609194] nfs: server 10.100.1.1 not responding, still trying
739[ 483.615244] nfs: server 10.100.1.1 not responding, still trying
740[ 483.621189] nfs: server 10.100.1.1 not responding, still trying
741[ 483.627131] nfs: server 10.100.1.1 not responding, still trying
742[ 483.633067] nfs: server 10.100.1.1 not responding, still trying
743[ 483.638999] nfs: server 10.100.1.1 not responding, still trying
744[ 483.684083] nfs: server 10.100.1.1 OK
745[ 483.796117] nfs: server 10.100.1.1 OK
746[ 483.893821] nfs: server 10.100.1.1 OK
747[ 483.965770] nfs: server 10.100.1.1 OK
748[ 484.048462] nfs: server 10.100.1.1 OK
749[ 484.077248] nfs: server 10.100.1.1 OK
750[ 487.887337] nfs: server 10.100.1.1 not responding, still trying
751[ 487.893318] nfs: server 10.100.1.1 not responding, still trying
752[ 487.899297] nfs: server 10.100.1.1 not responding, still trying
753[ 487.971328] nfs: server 10.100.1.1 OK
754[ 488.047374] nfs: server 10.100.1.1 OK
755[ 488.071633] nfs: server 10.100.1.1 OK
756[ 499.714290] nfs: server 10.100.1.1 not responding, still trying
757[ 500.027090] nfs: server 10.100.1.1 OK
758[ 516.451223] nfs: server 10.100.1.1 not responding, still trying
759[ 516.457215] nfs: server 10.100.1.1 not responding, still trying
760[ 516.463149] nfs: server 10.100.1.1 not responding, still trying
761[ 516.469090] nfs: server 10.100.1.1 not responding, still trying
762[ 516.475028] nfs: server 10.100.1.1 not responding, still trying
763[ 516.480955] nfs: server 10.100.1.1 not responding, still trying
764[ 516.486888] nfs: server 10.100.1.1 not responding, still trying
765[ 516.492825] nfs: server 10.100.1.1 not responding, still trying
766[ 516.498756] nfs: server 10.100.1.1 not responding, still trying
767[ 516.504692] nfs: server 10.100.1.1 not responding, still trying
768[ 516.510626] nfs: server 10.100.1.1 not responding, still trying
769[ 516.516575] nfs: server 10.100.1.1 not responding, still trying
770[ 516.522514] nfs: server 10.100.1.1 not responding, still trying
771[ 516.528448] nfs: server 10.100.1.1 not responding, still trying
772[ 516.534379] nfs: server 10.100.1.1 not responding, still trying
773[ 516.540316] nfs: server 10.100.1.1 not responding, still trying
774[ 516.546251] nfs: server 10.100.1.1 not responding, still trying
775[ 516.552186] nfs: server 10.100.1.1 not responding, still trying
776[ 516.558119] nfs: server 10.100.1.1 not responding, still trying
777[ 516.564056] nfs: server 10.100.1.1 not responding, still trying
778[ 516.599851] nfs: server 10.100.1.1 OK
779[ 516.697573] nfs: server 10.100.1.1 OK
780[ 516.757598] nfs: server 10.100.1.1 OK
781[ 516.831324] nfs: server 10.100.1.1 OK
782[ 516.901905] nfs: server 10.100.1.1 OK
783[ 516.965224] nfs: server 10.100.1.1 OK
784[ 517.023402] nfs: server 10.100.1.1 OK
785[ 517.112269] nfs: server 10.100.1.1 OK
786[ 517.183477] nfs: server 10.100.1.1 OK
787[ 517.278735] nfs: server 10.100.1.1 OK
788[ 517.350467] nfs: server 10.100.1.1 OK
789[ 517.423401] nfs: server 10.100.1.1 OK
790[ 517.473576] nfs: server 10.100.1.1 OK
791[ 517.540750] nfs: server 10.100.1.1 OK
792[ 517.627417] nfs: server 10.100.1.1 OK
793[ 517.698999] nfs: server 10.100.1.1 OK
794[ 517.761420] nfs: server 10.100.1.1 OK
795[ 517.834793] nfs: server 10.100.1.1 OK
796[ 517.911616] nfs: server 10.100.1.1 OK
797[ 517.919503] nfs: server 10.100.1.1 OK
798[ 522.128898] nfs: server 10.100.1.1 not responding, still trying
799[ 522.134866] nfs: server 10.100.1.1 not responding, still trying
800[ 522.140828] nfs: server 10.100.1.1 not responding, still trying
801[ 522.146770] nfs: server 10.100.1.1 not responding, still trying
802[ 522.152697] nfs: server 10.100.1.1 not responding, still trying
803[ 522.158634] nfs: server 10.100.1.1 not responding, still trying
804[ 522.164565] nfs: server 10.100.1.1 not responding, still trying
805[ 522.170497] nfs: server 10.100.1.1 not responding, still trying
806[ 524.824374] nfs: server 10.100.1.1 OK
807[ 524.890688] nfs: server 10.100.1.1 OK
808[ 524.966178] nfs: server 10.100.1.1 OK
809[ 525.037790] nfs: server 10.100.1.1 OK
810[ 525.115547] nfs: server 10.100.1.1 OK
811[ 525.206856] nfs: server 10.100.1.1 OK
812[ 525.304254] nfs: server 10.100.1.1 OK
813[ 525.333432] nfs: server 10.100.1.1 OK
814[ 533.028383] nfs: server 10.100.1.1 not responding, still trying
815[ 533.034360] nfs: server 10.100.1.1 not responding, still trying
816[ 533.040303] nfs: server 10.100.1.1 not responding, still trying
817[ 533.078534] nfs: server 10.100.1.1 OK
818[ 533.168178] nfs: server 10.100.1.1 OK
819[ 533.234676] nfs: server 10.100.1.1 OK
820[ 686.186548] nfs: server 10.100.1.1 not responding, still trying
821[ 690.049827] nfs: server 10.100.1.1 OK
822[ 763.963404] nfs: server 10.100.1.1 not responding, still trying
823[ 764.504617] nfs: server 10.100.1.1 OK