Gitiles
Code Review Sign In
review.coreboot.org / board-status / ec7365a0e0e6c6ecc19c27bb4db55f3c6d2f5348 / . / asus / kfsn4-dre / 4.0-8821-g1ea2e76 / 2015-04-04T02:04:24Z / kernel_log.txt
blob: ea57726995f8ee28553c845a676ebf69ace987f4 [file] [log] [blame]
Raptor Engineering Automated Test Stand24ab0092015-04-04 03:17:08 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
12[ 0.000000] NX (Execute Disable) protection: active
13[ 0.000000] SMBIOS 2.7 present.
14[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8821-g1ea2e76-dirty 04/04/2015
15[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
16[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
17[ 0.000000] AGP: No AGP bridge found
18[ 0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
26[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
27[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
28[ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 0000000160000000 aka 5632M
34[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
35[ 0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
36[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
37[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
38[ 0.000000] Using GB pages for direct mapping
39[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
40[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
41[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
45[ 0.000000] [mem 0x15fe00000-0x15fffffff] page 2M
46[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
48[ 0.000000] [mem 0x15c000000-0x15fdfffff] page 2M
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
50[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
51[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
53[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
54[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
55[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
56[ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M
57[ 0.000000] [mem 0xdfe00000-0xdffa8fff] page 4k
58[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
59[ 0.000000] ACPI: Early table checksum verification disabled
60[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
61[ 0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
64[ 0.000000] ACPI: FACS 0x00000000DFFB2210 000040
65[ 0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
66[ 0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
91[ 0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
93[ 0.000000] NODE_DATA [mem 0x11fffb000-0x11fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
95[ 0.000000] NODE_DATA [mem 0x15fff9000-0x15fffdfff]
96[ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
97[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
98[ 0.000000] [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
99[ 0.000000] Zone ranges:
100[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
101[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
102[ 0.000000] Normal [mem 0x100000000-0x15fffffff]
103[ 0.000000] Movable zone start for each node
104[ 0.000000] Early memory node ranges
105[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
106[ 0.000000] node 0: [mem 0x00100000-0xdffa8fff]
107[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
108[ 0.000000] node 1: [mem 0x120000000-0x15fffffff]
109[ 0.000000] On node 0 totalpages: 1048391
110[ 0.000000] DMA zone: 56 pages used for memmap
111[ 0.000000] DMA zone: 21 pages reserved
112[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
113[ 0.000000] DMA32 zone: 12487 pages used for memmap
114[ 0.000000] DMA32 zone: 913321 pages, LIFO batch:31
115[ 0.000000] Normal zone: 1792 pages used for memmap
116[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
117[ 0.000000] On node 1 totalpages: 262144
118[ 0.000000] Normal zone: 3584 pages used for memmap
119[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
120[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
121[ 0.000000] ACPI: Local APIC address 0xfee00000
122[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
129[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
137[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
138[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
139[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
142[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
143[ 0.000000] ACPI: IRQ9 used by override.
144[ 0.000000] ACPI: IRQ14 used by override.
145[ 0.000000] ACPI: IRQ15 used by override.
146[ 0.000000] Using ACPI (MADT) for SMP configuration information
147[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
148[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
149[ 0.000000] nr_irqs_gsi: 40
150[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
152[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
154[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
155[ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
156[ 0.000000] Booting paravirtualized kernel on bare hardware
157[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
158[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
159[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
160[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
161[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292595
162[ 0.000000] Policy zone: Normal
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
173[ 0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.760 MHz processor
187[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.52 BogoMIPS (lpj=7639040)
188[ 0.010954] pid_max: default: 32768 minimum: 301
189[ 0.015676] ACPI: Core revision 20140424
190[ 0.022051] ACPI: All ACPI Tables successfully acquired
191[ 0.027575] Security Framework initialized
192[ 0.031753] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037663] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045488] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058768] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068601] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075626] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083586] Initializing cgroup subsys memory
199[ 0.088045] Initializing cgroup subsys devices
200[ 0.092588] Initializing cgroup subsys freezer
201[ 0.097112] Initializing cgroup subsys net_cls
202[ 0.101657] Initializing cgroup subsys blkio
203[ 0.106022] Initializing cgroup subsys perf_event
204[ 0.110817] Initializing cgroup subsys net_prio
205[ 0.115475] tseg: 0000000000
206[ 0.115489] CPU: Physical Processor ID: 0
207[ 0.119621] CPU: Processor Core ID: 0
208[ 0.124433] mce: CPU supports 6 MCE banks
209[ 0.128576] LVT offset 0 assigned for vector 0xf9
210[ 0.133367] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148845] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.157979] ftrace: allocating 21601 entries in 85 pages
215[ 0.173416] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219061] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336310] Performance Events: AMD PMU driver.
218[ 0.341022] ... version: 0
219[ 0.345118] ... bit width: 48
220[ 0.349296] ... generic registers: 4
221[ 0.353403] ... value mask: 0000ffffffffffff
222[ 0.358795] ... max period: 00007fffffffffff
223[ 0.364210] ... fixed-purpose events: 0
224[ 0.368294] ... event mask: 000000000000000f
225[ 0.376327] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384637] x86: Booting SMP configuration:
227[ 0.388909] .... node #0, CPUs: #1 #2 #3
228[ 0.433484] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585131] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589580] smpboot: Total of 8 processors activated (30557.34 BogoMIPS)
231[ 0.602230] devtmpfs: initialized
232[ 0.614257] pinctrl core: initialized pinctrl subsystem
233[ 0.619743] NET: Registered protocol family 16
234[ 0.624478] cpuidle: using governor ladder
235[ 0.628651] cpuidle: using governor menu
236[ 0.632659] node 0 link 1: io port [1000, 3fff]
237[ 0.632663] TOM: 00000000e0000000 aka 3584M
238[ 0.636924] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
239[ 0.636928] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636931] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636933] TOM2: 0000000160000000 aka 5632M
242[ 0.641272] bus: [bus 00-05] on node 0 link 1
243[ 0.641274] bus: 00 [io 0x0000-0xffff]
244[ 0.641276] bus: 00 [mem 0xf0000000-0xffffffff]
245[ 0.641278] bus: 00 [mem 0x160000000-0xfcffffffff]
246[ 0.641382] ACPI: bus type PCI registered
247[ 0.645474] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652152] PCI: Using configuration type 1 for base access
249[ 0.657806] PCI: Using configuration type 1 for extended access
250[ 0.664423] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670783] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676607] mtrr: corrected configuration.
253[ 0.693190] ACPI: Added _OSI(Module Device)
254[ 0.697490] ACPI: Added _OSI(Processor Device)
255[ 0.702014] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706797] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715689] ACPI: Interpreter enabled
258[ 0.719430] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.728890] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738338] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.747791] ACPI: (supports S0 S1 S5)
262[ 0.751524] ACPI: Using IOAPIC for interrupt routing
263[ 0.756617] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.785016] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.791288] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.799610] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.836843] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.846970] PCI host bridge to bus 0000:00
269[ 0.851144] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.856707] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.862963] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.869914] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.876872] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.883139] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.883331] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.883338] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.883469] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.883477] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.883502] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.883510] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.883552] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.883657] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.883673] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.883699] pci 0000:00:02.0: supports D1 D2
285[ 0.883711] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.883758] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.889574] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.889587] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.889629] pci 0000:00:02.1: supports D1 D2
290[ 0.889648] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.889716] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.895531] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.895557] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.895585] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.902810] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.909427] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.916655] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.923381] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.923391] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.923396] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.923401] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.923405] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.923410] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.923415] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.923540] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.923549] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.923554] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.923559] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.923563] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.923568] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.923573] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.923746] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.923869] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.929686] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.929737] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.929786] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.935597] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.935653] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.935708] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.941519] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.941568] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.941619] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.947413] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.947459] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.947519] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.953338] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.953547] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.953655] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.953775] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.953904] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.954023] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.954150] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.954300] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.954449] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.954614] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.954799] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.954838] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.954850] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.954857] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.954895] pci 0000:01:04.0: supports D1 D2
341[ 0.955013] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.960065] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.960068] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.960071] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.960194] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.960223] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.960259] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
348[ 0.960347] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.960467] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.970602] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.975659] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.975766] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.975798] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.975908] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.976009] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.986141] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.991193] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.991274] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.996403] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.001495] pci_bus 0000:00: on NUMA node 0
361[ 1.001597] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.008023] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.014462] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.022120] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.029772] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.037432] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.045106] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.051525] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.057935] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.065592] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.073272] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.081027] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.087481] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.093913] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.101567] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.109233] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.116903] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.126014] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.132742] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.139476] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.146197] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.153199] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.158463] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.164242] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.172446] vgaarb: loaded
386[ 1.175231] vgaarb: bridge control possible 0000:01:04.0
387[ 1.180798] PCI: Using ACPI for IRQ routing
388[ 1.185080] PCI: pci_cache_line_size set to 64 bytes
389[ 1.185137] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.185141] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
391[ 1.185454] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.192589] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.197874] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.206590] Switched to clocksource hpet
395[ 1.222074] pnp: PnP ACPI init
396[ 1.225289] ACPI: bus type PNP registered
397[ 1.229926] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.230007] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.230106] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.230184] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.230225] pnp 00:04: [dma 2]
402[ 1.230267] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.230289] pnp: PnP ACPI: found 5 devices
404[ 1.234490] ACPI: bus type PNP unregistered
405[ 1.246575] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
406[ 1.256628] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.261675] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.267855] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.274727] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.282061] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.289414] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.294459] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.301336] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.306387] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.313256] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.318302] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.323345] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.323347] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.323351] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.323353] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.323356] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.323359] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.323361] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.323364] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.323367] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.323509] NET: Registered protocol family 2
427[ 1.328472] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.336258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.343668] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.350349] TCP: reno registered
431[ 1.353669] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.359943] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.366803] NET: Registered protocol family 1
434[ 1.371638] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.377835] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.383822] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.389439] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.395023] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.400663] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.406278] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.411857] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.417512] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.423110] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.428695] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.434347] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.439948] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.445540] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.451196] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.456785] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.456793] PCI: CLS 64 bytes, default 64
451[ 1.456901] Unpacking initramfs...
452[ 1.689781] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.697769] PCI-DMA: Disabling AGP.
454[ 1.702968] PCI-DMA: aperture base @ d4000000 size 65536 KB
455[ 1.708668] PCI-DMA: using GART IOMMU.
456[ 1.712527] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.724619] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.732959] microcode: CPU0: patch_level=0x01000096
459[ 1.737963] microcode: CPU1: patch_level=0x01000096
460[ 1.742971] microcode: CPU2: patch_level=0x01000096
461[ 1.747983] microcode: CPU3: patch_level=0x01000096
462[ 1.752990] microcode: CPU4: patch_level=0x01000096
463[ 1.757981] microcode: CPU5: patch_level=0x01000096
464[ 1.762976] microcode: CPU6: patch_level=0x01000096
465[ 1.769076] microcode: CPU7: patch_level=0x01000096
466[ 1.774166] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.783105] LVT offset 1 assigned for vector 0x400
468[ 1.788017] IBS: LVT offset 1 assigned
469[ 1.791888] perf: AMD IBS detected (0x00000007)
470[ 1.797113] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.803605] audit: initializing netlink subsys (disabled)
472[ 1.809130] audit: type=2000 audit(1428117387.620:1): initialized
473[ 1.816038] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.822534] zbud: loaded
475[ 1.825498] VFS: Disk quotas dquot_6.5.2
476[ 1.829559] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.836196] msgmni has been set to 9941
478[ 1.840662] alg: No test for stdrng (krng)
479[ 1.844948] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.852593] io scheduler noop registered
481[ 1.856631] io scheduler deadline registered
482[ 1.861093] io scheduler cfq registered (default)
483[ 1.866089] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.866216] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.866346] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.866478] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.866639] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.866667] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.866693] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.866718] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.866738] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.873860] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.880480] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.880490] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.887541] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.894159] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.894170] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.901214] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.901225] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.908265] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.908293] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.913987] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.920808] GHES: HEST is not enabled!
504[ 1.924784] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.951575] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.979365] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.987416] Linux agpgart interface v0.103
508[ 1.991829] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.002279] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.007448] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.012804] mousedev: PS/2 mouse device common for all mice
512[ 2.018586] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.023772] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.030249] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.038210] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.044484] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.051030] AMD IOMMUv2 functionality not available on this system
518[ 2.057435] TCP: cubic registered
519[ 2.060989] NET: Registered protocol family 10
520[ 2.065918] mip6: Mobile IPv6
521[ 2.067505] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
522[ 2.077690] NET: Registered protocol family 17
523[ 2.082242] mpls_gso: MPLS GSO support
524[ 2.086924] registered taskstats version 1
525[ 2.091848] rtc_cmos rtc_cmos: setting system clock to 2015-04-04 03:16:29 UTC (1428117389)
526[ 2.100430] PM: Hibernation image not present or could not be loaded.
527[ 2.102235] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.110255] Write protecting the kernel read-only data: 8192k
529[ 2.119572] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.128323] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.148432] systemd-udevd[98]: starting version 215
532[ 2.153955] random: systemd-udevd urandom read with 3 bits of entropy available
533[ 2.176648] ACPI: bus type USB registered
534[ 2.180932] usbcore: registered new interface driver usbfs
535[ 2.180991] pps_core: LinuxPPS API ver. 1 registered
536[ 2.180992] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
537[ 2.200899] usbcore: registered new interface driver hub
538[ 2.206551] usbcore: registered new device driver usb
539[ 2.206566] PTP clock support registered
540[ 2.217181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.224083] tg3.c:v3.137 (May 11, 2014)
542[ 2.228080] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.234029] ehci-pci: EHCI PCI platform driver
544[ 2.234106] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.244666] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.244843] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.244856] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.244875] ehci-pci 0000:00:02.1: debug port 1
549[ 2.244919] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.244946] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.254251] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.254320] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.254322] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.254323] usb usb1: Product: EHCI Host Controller
555[ 2.254324] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.254326] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.254713] hub 1-0:1.0: USB hub found
558[ 2.254723] hub 1-0:1.0: 10 ports detected
559[ 2.318531] ohci-pci: OHCI PCI platform driver
560[ 2.323283] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.328957] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.336503] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.373381] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.383778] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.393634] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.400273] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
567[ 2.400275] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
568[ 2.400276] usb usb2: Product: OHCI PCI host controller
569[ 2.400278] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
570[ 2.400279] usb usb2: SerialNumber: 0000:00:02.0
571[ 2.400496] hub 2-0:1.0: USB hub found
572[ 2.400506] hub 2-0:1.0: 10 ports detected
573[ 2.439868] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
574[ 2.446785] tg3 0000:03:00.0: enabling device (0004 -> 0006)
575[ 2.452717] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
576[ 2.510742] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.521159] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.531008] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.538949] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.552118] FS-Cache: Loaded
581[ 2.559350] RPC: Registered named UNIX socket transport module.
582[ 2.566042] RPC: Registered udp transport module.
583[ 2.572112] RPC: Registered tcp transport module.
584[ 2.578206] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.590682] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.604701] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.650206] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.722084] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.725830] Switched to clocksource tsc
590[ 4.221906] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.228584] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.235589] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 6.343815] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 6.358003] systemd[1]: Detected architecture 'x86-64'.
595[ 6.547681] random: nonblocking pool is initialized
596[ 6.572236] systemd[1]: Inserted module 'autofs4'
597[ 6.578846] systemd[1]: Set hostname to <cb-test-tgt>.
598[ 7.099563] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 7.112469] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 7.127858] systemd[1]: Expecting device dev-ttyS0.device...
601[ 7.144707] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 7.152766] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 7.160473] systemd[1]: Starting Remote File Systems (Pre).
604[ 7.176575] systemd[1]: Reached target Remote File Systems (Pre).
605[ 7.182846] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
606[ 7.204654] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
607[ 7.214314] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 7.222522] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 7.230564] systemd[1]: Starting Paths.
610[ 7.244636] systemd[1]: Reached target Paths.
611[ 7.249183] systemd[1]: Starting Encrypted Volumes.
612[ 7.264544] systemd[1]: Reached target Encrypted Volumes.
613[ 7.270072] systemd[1]: Starting Swap.
614[ 7.284555] systemd[1]: Reached target Swap.
615[ 7.288956] systemd[1]: Starting Root Slice.
616[ 7.308573] systemd[1]: Created slice Root Slice.
617[ 7.313425] systemd[1]: Starting User and Session Slice.
618[ 7.328541] systemd[1]: Created slice User and Session Slice.
619[ 7.334408] systemd[1]: Starting Delayed Shutdown Socket.
620[ 7.348512] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 7.354356] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 7.372506] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 7.379591] systemd[1]: Starting Journal Socket (/dev/log).
624[ 7.396540] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 7.402629] systemd[1]: Starting Syslog Socket.
626[ 7.416506] systemd[1]: Listening on Syslog Socket.
627[ 7.422606] systemd[1]: Starting udev Kernel Socket.
628[ 7.436487] systemd[1]: Listening on udev Kernel Socket.
629[ 7.441939] systemd[1]: Starting udev Control Socket.
630[ 7.456501] systemd[1]: Listening on udev Control Socket.
631[ 7.462054] systemd[1]: Starting Journal Socket.
632[ 7.476493] systemd[1]: Listening on Journal Socket.
633[ 7.481673] systemd[1]: Starting Sockets.
634[ 7.496473] systemd[1]: Reached target Sockets.
635[ 7.501159] systemd[1]: Starting System Slice.
636[ 7.516462] systemd[1]: Created slice System Slice.
637[ 7.521476] systemd[1]: Starting system-getty.slice.
638[ 7.536476] systemd[1]: Created slice system-getty.slice.
639[ 7.542015] systemd[1]: Starting system-serial\x2dgetty.slice.
640[ 7.560469] systemd[1]: Created slice system-serial\x2dgetty.slice.
641[ 7.567378] systemd[1]: Starting Create list of required static device nodes for the current kernel...
642[ 7.589659] systemd[1]: Mounting Debug File System...
643[ 7.618349] systemd[1]: Started Set Up Additional Binary Formats.
644[ 7.624669] systemd[1]: Mounting Huge Pages File System...
645[ 7.680918] systemd[1]: Starting Load Kernel Modules...
646[ 7.697466] systemd[1]: Mounting POSIX Message Queue File System...
647[ 7.713983] systemd[1]: Starting udev Coldplug all Devices...
648[ 7.729392] systemd[1]: Starting Journal Service...
649[ 7.756451] systemd[1]: Started Journal Service.
650[ 8.203043] systemd-udevd[186]: starting version 215
651[ 8.491857] systemd-journald[166]: Received request to flush runtime journal from PID 1
652[ 9.320341] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
653[ 9.328335] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
654[ 9.415031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
655[ 9.423756] ACPI: Power Button [PWRB]
656[ 9.427764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
657[ 9.435304] ACPI: Power Button [PWRF]
658[ 9.440320] EDAC MC: Ver: 3.0.0
659[ 9.527807] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
660[ 9.534940] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
661[ 9.649218] SCSI subsystem initialized
662[ 9.654530] MCE: In-kernel MCE decoding enabled.
663[ 9.659635] acpi-cpufreq: overriding BIOS provided _PSD data
664[ 9.669420] FDC 0 is a post-1991 82077
665[ 9.694812] libata version 3.00 loaded.
666[ 9.898861] AMD64 EDAC driver v3.4.0
667[ 9.903268] input: PC Speaker as /devices/platform/pcspkr/input/input4
668[ 10.004674] kvm: Nested Virtualization enabled
669[ 10.009248] kvm: Nested Paging enabled
670[ 12.774613] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
671[ 12.780167] EDAC amd64: DRAM ECC enabled.
672[ 12.780189] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
673[ 12.791122] EDAC amd64: F10h detected (node 0).
674[ 12.795822] EDAC MC: DCT0 chip selects:
675[ 12.795825] EDAC amd64: MC: 0: 0MB 1: 0MB
676[ 12.800649] EDAC amd64: MC: 2: 0MB 3: 0MB
677[ 12.805433] EDAC amd64: MC: 4: 0MB 5: 0MB
678[ 12.810217] EDAC amd64: MC: 6: 1024MB 7: 1024MB
679[ 12.815003] EDAC MC: DCT1 chip selects:
680[ 12.815006] EDAC amd64: MC: 0: 0MB 1: 0MB
681[ 12.819814] EDAC amd64: MC: 2: 0MB 3: 0MB
682[ 12.824621] EDAC amd64: MC: 4: 0MB 5: 0MB
683[ 12.829421] EDAC amd64: MC: 6: 1024MB 7: 1024MB
684[ 12.834220] EDAC amd64: using x4 syndromes.
685[ 12.838509] EDAC amd64: MCT channel count: 2
686[ 12.842940] EDAC amd64: CS6: Registered DDR2 RAM
687[ 12.847660] EDAC amd64: CS7: Registered DDR2 RAM
688[ 12.852800] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
689[ 12.862687] sata_nv 0000:00:07.0: version 3.5
690[ 12.863073] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
691[ 12.869690] scsi0 : sata_nv
692[ 12.872921] scsi1 : sata_nv
693[ 12.875909] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
694[ 12.883160] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
695[ 12.890664] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
696[ 12.896973] scsi2 : sata_nv
697[ 12.900065] scsi3 : sata_nv
698[ 12.903041] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
699[ 12.910270] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
700[ 12.917590] pata_amd 0000:00:06.0: version 0.4.1
701[ 12.918346] scsi4 : pata_amd
702[ 12.921567] scsi5 : pata_amd
703[ 12.924782] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
704[ 12.931878] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
705[ 12.939039] EDAC amd64: DRAM ECC enabled.
706[ 12.943318] EDAC amd64: F10h detected (node 1).
707[ 12.947997] EDAC MC: DCT0 chip selects:
708[ 12.948000] EDAC amd64: MC: 0: 1024MB 1: 0MB
709[ 12.952797] EDAC amd64: MC: 2: 0MB 3: 0MB
710[ 12.957594] EDAC amd64: MC: 4: 0MB 5: 0MB
711[ 12.962402] EDAC amd64: MC: 6: 0MB 7: 0MB
712[ 12.967194] EDAC MC: DCT1 chip selects:
713[ 12.967196] EDAC amd64: MC: 0: 0MB 1: 0MB
714[ 12.971985] EDAC amd64: MC: 2: 0MB 3: 0MB
715[ 12.976779] EDAC amd64: MC: 4: 0MB 5: 0MB
716[ 12.981568] EDAC amd64: MC: 6: 0MB 7: 0MB
717[ 12.986393] EDAC amd64: using x4 syndromes.
718[ 12.990662] EDAC amd64: MCT channel count: 1
719[ 12.995110] EDAC amd64: CS0: Registered DDR2 RAM
720[ 13.000126] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
721[ 13.010032] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
722[ 13.202476] ata1: SATA link down (SStatus 0 SControl 300)
723[ 13.226466] ata3: SATA link down (SStatus 0 SControl 300)
724[ 13.518361] ata2: SATA link down (SStatus 0 SControl 300)
725[ 13.834252] ata4: SATA link down (SStatus 0 SControl 300)