Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 5 | [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved |
| 13 | [ 0.000000] NX (Execute Disable) protection: active |
| 14 | [ 0.000000] SMBIOS 2.7 present. |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 15 | [ 0.000000] DMI: Qemu q35/q35, BIOS RAPTOR-NORMAL 12/01/2015 |
Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 16 | [ 0.000000] Hypervisor detected: KVM |
| 17 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 18 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 19 | [ 0.000000] AGP: No AGP bridge found |
| 20 | [ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000 |
| 21 | [ 0.000000] MTRR default type: uncachable |
| 22 | [ 0.000000] MTRR fixed ranges disabled: |
| 23 | [ 0.000000] 00000-FFFFF uncachable |
| 24 | [ 0.000000] MTRR variable ranges disabled: |
| 25 | [ 0.000000] 0 disabled |
| 26 | [ 0.000000] 1 disabled |
| 27 | [ 0.000000] 2 disabled |
| 28 | [ 0.000000] 3 disabled |
| 29 | [ 0.000000] 4 disabled |
| 30 | [ 0.000000] 5 disabled |
| 31 | [ 0.000000] 6 disabled |
| 32 | [ 0.000000] 7 disabled |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 33 | [ 0.000000] PAT not supported by CPU. |
Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 34 | [ 0.000000] CPU MTRRs all blank - virtualized system. |
| 35 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 36 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 37 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 38 | [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| 39 | [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| 40 | [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| 41 | [ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff] |
| 42 | [ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M |
| 43 | [ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff] |
| 44 | [ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M |
| 45 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff] |
| 46 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 47 | [ 0.000000] [mem 0x00200000-0x1bffffff] page 2M |
| 48 | [ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff] |
| 49 | [ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M |
| 50 | [ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k |
| 51 | [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 52 | [ 0.000000] RAMDISK: [mem 0x1f5f2000-0x1fe7bfff] |
Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 53 | [ 0.000000] ACPI: Early table checksum verification disabled |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 54 | [ 0.000000] ACPI: RSDP 0x00000000000F1900 000024 (v02 CORE ) |
Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 55 | [ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 56 | [ 0.000000] ACPI: FACP 0x000000001FFBADC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000) |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 57 | [ 0.000000] ACPI: DSDT 0x000000001FFB9280 001B38 (v01 CORE COREBOOT 00000002 INTL 20150204) |
Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 58 | [ 0.000000] ACPI: FACS 0x000000001FFB9240 000040 |
| 59 | [ 0.000000] ACPI: MCFG 0x000000001FFBAEC0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 60 | [ 0.000000] ACPI: TCPA 0x000000001FFBAF00 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 61 | [ 0.000000] ACPI: APIC 0x000000001FFBAF40 000054 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 62 | [ 0.000000] ACPI: HPET 0x000000001FFBAFA0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 63 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 64 | [ 0.000000] No NUMA configuration found |
| 65 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff] |
| 66 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff] |
| 67 | [ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff] |
| 68 | [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 |
| 69 | [ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock |
| 70 | [ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0 |
| 71 | [ 0.000000] Zone ranges: |
| 72 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 73 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 74 | [ 0.000000] Normal empty |
| 75 | [ 0.000000] Movable zone start for each node |
| 76 | [ 0.000000] Early memory node ranges |
| 77 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 78 | [ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff] |
| 79 | [ 0.000000] On node 0 totalpages: 130878 |
| 80 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 81 | [ 0.000000] DMA zone: 21 pages reserved |
| 82 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 83 | [ 0.000000] DMA32 zone: 1735 pages used for memmap |
| 84 | [ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31 |
| 85 | [ 0.000000] ACPI: PM-Timer IO Port: 0x608 |
| 86 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 87 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 88 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 89 | [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
| 90 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 91 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 92 | [ 0.000000] ACPI: IRQ0 used by override. |
| 93 | [ 0.000000] ACPI: IRQ2 used by override. |
| 94 | [ 0.000000] ACPI: IRQ9 used by override. |
| 95 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 96 | [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 |
| 97 | [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs |
| 98 | [ 0.000000] nr_irqs_gsi: 40 |
| 99 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 100 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 101 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 102 | [ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices |
| 103 | [ 0.000000] Booting paravirtualized kernel on KVM |
| 104 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 |
| 105 | [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152 |
| 106 | [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152 |
| 107 | [ 0.000000] pcpu-alloc: [0] 0 |
| 108 | [ 0.000000] KVM setup async PF for cpu 0 |
| 109 | [ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080 |
| 110 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066 |
| 111 | [ 0.000000] Policy zone: DMA32 |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 112 | [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 113 | [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) |
| 114 | [ 0.000000] AGP: Checking aperture... |
| 115 | [ 0.000000] AGP: No AGP bridge found |
| 116 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 117 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 118 | [ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved) |
| 119 | [ 0.000000] Hierarchical RCU implementation. |
| 120 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 121 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1. |
| 122 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 |
| 123 | [ 0.000000] NR_IRQS:33024 nr_irqs:256 16 |
| 124 | [ 0.000000] Console: colour VGA+ 80x25 |
| 125 | [ 0.000000] console [ttyS0] enabled |
| 126 | [ 0.000000] hpet clockevent registered |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 127 | [ 0.000000] tsc: Detected 2393.998 MHz processor |
| 128 | [ 0.008000] Calibrating delay loop (skipped) preset value.. 4787.99 BogoMIPS (lpj=9575992) |
Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 129 | [ 0.008000] pid_max: default: 32768 minimum: 301 |
| 130 | [ 0.008000] ACPI: Core revision 20140424 |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 131 | [ 0.008332] ACPI: All ACPI Tables successfully acquired |
| 132 | [ 0.009208] Security Framework initialized |
| 133 | [ 0.009855] AppArmor: AppArmor disabled by boot time parameter |
| 134 | [ 0.010757] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 135 | [ 0.011832] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) |
| 136 | [ 0.012107] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| 137 | [ 0.013233] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) |
| 138 | [ 0.014287] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) |
| 139 | [ 0.016185] Initializing cgroup subsys memory |
| 140 | [ 0.016889] Initializing cgroup subsys devices |
| 141 | [ 0.017593] Initializing cgroup subsys freezer |
| 142 | [ 0.018291] Initializing cgroup subsys net_cls |
| 143 | [ 0.019001] Initializing cgroup subsys blkio |
| 144 | [ 0.020008] Initializing cgroup subsys perf_event |
| 145 | [ 0.020748] Initializing cgroup subsys net_prio |
| 146 | [ 0.021517] mce: CPU supports 10 MCE banks |
| 147 | [ 0.022200] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 |
Raptor Engineering Automated Coreboot Test Stand | e7a56ea | 2016-02-02 03:08:43 +0000 | [diff] [blame] | 148 | Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 |
Raptor Engineering Automated Coreboot Test Stand | e85f6a1 | 2016-02-02 03:10:15 +0000 | [diff] [blame] | 149 | tlb_flushall_shift: 6 |
| 150 | [ 0.033193] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| 151 | [ 0.037607] ftrace: allocating 21601 entries in 85 pages |
| 152 | [ 0.048987] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| 153 | [ 0.052002] smpboot: CPU0: Intel QEMU Virtual CPU version 2.0.0 (fam: 06, model: 02, stepping: 03) |
| 154 | [ 0.056000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only. |
| 155 | [ 0.056000] x86: Booted up 1 node, 1 CPUs |
| 156 | [ 0.056000] smpboot: Total of 1 processors activated (4787.99 BogoMIPS) |
| 157 | [ 0.056237] NMI watchdog: disabled (cpu0): hardware events not enabled |
| 158 | [ 0.057311] devtmpfs: initialized |
| 159 | [ 0.062764] pinctrl core: initialized pinctrl subsystem |
| 160 | [ 0.063628] NET: Registered protocol family 16 |
| 161 | [ 0.064124] cpuidle: using governor ladder |
| 162 | [ 0.064765] cpuidle: using governor menu |
| 163 | [ 0.065424] ACPI: bus type PCI registered |
| 164 | [ 0.066041] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 165 | [ 0.067131] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) |
| 166 | [ 0.068006] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 |
| 167 | [ 0.069523] PCI: Using configuration type 1 for base access |
| 168 | [ 0.072014] ACPI: Added _OSI(Module Device) |
| 169 | [ 0.072670] ACPI: Added _OSI(Processor Device) |
| 170 | [ 0.073344] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 171 | [ 0.074056] ACPI: Added _OSI(Processor Aggregator Device) |
| 172 | [ 0.077282] ACPI: Interpreter enabled |
| 173 | [ 0.077865] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) |
| 174 | [ 0.079288] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| 175 | [ 0.080344] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| 176 | [ 0.081763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| 177 | [ 0.083184] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580) |
| 178 | [ 0.084818] ACPI: (supports S0) |
| 179 | [ 0.085295] ACPI: Using IOAPIC for interrupt routing |
| 180 | [ 0.086066] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 181 | [ 0.089457] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 182 | [ 0.090416] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 183 | [ 0.091785] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 184 | [ 0.092095] PCI host bridge to bus 0000:00 |
| 185 | [ 0.092724] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 186 | [ 0.093553] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 187 | [ 0.094488] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| 188 | [ 0.096003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 189 | [ 0.097043] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff] |
| 190 | [ 0.098101] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 |
| 191 | [ 0.098398] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000 |
| 192 | [ 0.101090] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] |
| 193 | [ 0.103336] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff] |
| 194 | [ 0.114138] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref] |
| 195 | [ 0.114278] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000 |
| 196 | [ 0.116004] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff] |
| 197 | [ 0.118056] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f] |
| 198 | [ 0.128004] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref] |
| 199 | [ 0.128300] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 |
| 200 | [ 0.128603] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO |
| 201 | [ 0.129820] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO |
| 202 | [ 0.132037] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 |
| 203 | [ 0.142042] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f] |
| 204 | [ 0.144004] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff] |
| 205 | [ 0.146353] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 |
| 206 | [ 0.146512] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f] |
| 207 | [ 0.146951] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0 |
| 208 | [ 0.148361] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0 |
| 209 | [ 0.149402] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0 |
| 210 | [ 0.150447] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0 |
| 211 | [ 0.151500] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0 |
| 212 | [ 0.152361] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0 |
| 213 | [ 0.153402] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0 |
| 214 | [ 0.154453] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0 |
| 215 | [ 0.155445] ACPI: PCI Interrupt Link [GSIA] (IRQs *16) |
| 216 | [ 0.156149] ACPI: PCI Interrupt Link [GSIB] (IRQs *17) |
| 217 | [ 0.156970] ACPI: PCI Interrupt Link [GSIC] (IRQs *18) |
| 218 | [ 0.157794] ACPI: PCI Interrupt Link [GSID] (IRQs *19) |
| 219 | [ 0.158624] ACPI: PCI Interrupt Link [GSIE] (IRQs *20) |
| 220 | [ 0.159445] ACPI: PCI Interrupt Link [GSIF] (IRQs *21) |
| 221 | [ 0.160147] ACPI: PCI Interrupt Link [GSIG] (IRQs *22) |
| 222 | [ 0.160964] ACPI: PCI Interrupt Link [GSIH] (IRQs *23) |
| 223 | [ 0.161955] ACPI: Enabled 16 GPEs in block 00 to 3F |
| 224 | [ 0.162828] vgaarb: setting as boot device: PCI:0000:00:01.0 |
| 225 | [ 0.163688] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none |
| 226 | [ 0.164002] vgaarb: loaded |
| 227 | [ 0.164416] vgaarb: bridge control possible 0000:00:01.0 |
| 228 | [ 0.165267] PCI: Using ACPI for IRQ routing |
| 229 | [ 0.215274] PCI: pci_cache_line_size set to 64 bytes |
| 230 | [ 0.215352] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 231 | [ 0.215354] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff] |
| 232 | [ 0.215497] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| 233 | [ 0.216018] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| 234 | [ 0.216805] hpet0: 3 comparators, 64-bit 100.000000 MHz counter |
| 235 | [ 0.221085] Switched to clocksource kvm-clock |
| 236 | [ 0.225653] pnp: PnP ACPI init |
| 237 | [ 0.226156] ACPI: bus type PNP registered |
| 238 | [ 0.226828] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 239 | [ 0.226882] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) |
| 240 | [ 0.226928] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 241 | [ 0.227026] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) |
| 242 | [ 0.227096] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) |
| 243 | [ 0.227360] pnp: PnP ACPI: found 5 devices |
| 244 | [ 0.227995] ACPI: bus type PNP unregistered |
| 245 | [ 0.234867] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f] |
| 246 | [ 0.235813] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 247 | [ 0.235815] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 248 | [ 0.235817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 249 | [ 0.235819] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff] |
| 250 | [ 0.235842] NET: Registered protocol family 2 |
| 251 | [ 0.236668] TCP established hash table entries: 4096 (order: 3, 32768 bytes) |
| 252 | [ 0.237762] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) |
| 253 | [ 0.238749] TCP: Hash tables configured (established 4096 bind 4096) |
| 254 | [ 0.239722] TCP: reno registered |
| 255 | [ 0.240234] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| 256 | [ 0.241127] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| 257 | [ 0.242111] NET: Registered protocol family 1 |
| 258 | [ 0.242805] pci 0000:00:01.0: Video device with shadowed ROM |
| 259 | [ 0.242842] PCI: CLS 64 bytes, default 64 |
| 260 | [ 0.242879] Unpacking initramfs... |
| 261 | [ 0.405074] Freeing initrd memory: 8744K (ffff88001f5f2000 - ffff88001fe7c000) |
| 262 | [ 0.406382] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1 |
| 263 | [ 0.407260] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 264 | [ 0.408812] futex hash table entries: 256 (order: 2, 16384 bytes) |
| 265 | [ 0.409767] audit: initializing netlink subsys (disabled) |
| 266 | [ 0.410597] audit: type=2000 audit(1454382340.832:1): initialized |
| 267 | [ 0.411763] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 268 | [ 0.412769] zbud: loaded |
| 269 | [ 0.413315] VFS: Disk quotas dquot_6.5.2 |
| 270 | [ 0.413928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 271 | [ 0.414934] msgmni has been set to 983 |
| 272 | [ 0.415750] alg: No test for stdrng (krng) |
| 273 | [ 0.416420] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 274 | [ 0.417575] io scheduler noop registered |
| 275 | [ 0.418183] io scheduler deadline registered |
| 276 | [ 0.418852] io scheduler cfq registered (default) |
| 277 | [ 0.419621] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 278 | [ 0.420493] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 279 | [ 0.421536] intel_idle: does not run on family 6 model 2 |
| 280 | [ 0.421559] GHES: HEST is not enabled! |
| 281 | [ 0.422206] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 282 | [ 0.449276] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 283 | [ 0.450700] Linux agpgart interface v0.103 |
| 284 | [ 0.451440] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
| 285 | [ 0.453283] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 286 | [ 0.454042] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 287 | [ 0.454963] mousedev: PS/2 mouse device common for all mice |
| 288 | [ 0.456081] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 289 | [ 0.457582] rtc_cmos 00:00: RTC can wake from S4 |
| 290 | [ 0.458524] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 |
| 291 | [ 0.459592] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs |
| 292 | [ 0.460790] ledtrig-cpu: registered to indicate activity on CPUs |
| 293 | [ 0.461765] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| 294 | [ 0.462741] AMD IOMMUv2 functionality not available on this system |
| 295 | [ 0.463755] TCP: cubic registered |
| 296 | [ 0.464297] NET: Registered protocol family 10 |
| 297 | [ 0.465125] mip6: Mobile IPv6 |
| 298 | [ 0.465606] NET: Registered protocol family 17 |
| 299 | [ 0.466284] mpls_gso: MPLS GSO support |
| 300 | [ 0.467044] registered taskstats version 1 |
| 301 | [ 0.467925] rtc_cmos 00:00: setting system clock to 2016-02-02 03:05:40 UTC (1454382340) |
| 302 | [ 0.469202] PM: Hibernation image not present or could not be loaded. |
| 303 | [ 0.470219] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| 304 | [ 0.471414] Write protecting the kernel read-only data: 8192k |
| 305 | [ 0.474419] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| 306 | [ 0.476141] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| 307 | [ 0.484108] systemd-udevd[52]: starting version 215 |
| 308 | [ 0.485097] random: systemd-udevd urandom read with 1 bits of entropy available |
| 309 | [ 0.492981] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI |
| 310 | [ 0.493774] e1000: Copyright (c) 1999-2006 Intel Corporation. |
| 311 | [ 0.494616] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22 |
| 312 | [ 0.834675] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff |
| 313 | [ 0.836324] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection |
| 314 | [ 0.846094] FS-Cache: Loaded |
| 315 | [ 0.850411] RPC: Registered named UNIX socket transport module. |
| 316 | [ 0.851787] RPC: Registered udp transport module. |
| 317 | [ 0.852901] RPC: Registered tcp transport module. |
| 318 | [ 0.854016] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 319 | [ 0.859998] FS-Cache: Netfs 'nfs' registered for caching |
| 320 | [ 0.871640] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 321 | [ 1.404243] tsc: Refined TSC clocksource calibration: 2394.003 MHz |
| 322 | [ 2.872723] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX |
| 323 | [ 2.874961] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 324 | [ 3.400220] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| 325 | [ 3.403371] systemd[1]: Detected virtualization 'kvm'. |
| 326 | [ 3.404632] systemd[1]: Detected architecture 'x86-64'. |
| 327 | [ 3.617925] systemd[1]: Inserted module 'autofs4' |
| 328 | [ 3.621034] systemd[1]: Set hostname to <cb-test-tgt>. |
| 329 | [ 4.149632] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| 330 | [ 4.152743] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| 331 | [ 4.156757] systemd[1]: Expecting device dev-ttyS0.device... |
| 332 | [ 4.159924] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| 333 | [ 4.161825] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 334 | [ 4.163646] systemd[1]: Starting Remote File Systems (Pre). |
| 335 | [ 4.167077] systemd[1]: Reached target Remote File Systems (Pre). |
| 336 | [ 4.168589] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| 337 | [ 4.173250] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 338 | [ 4.175497] systemd[1]: Starting Encrypted Volumes. |
| 339 | [ 4.178610] systemd[1]: Reached target Encrypted Volumes. |
| 340 | [ 4.179910] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| 341 | [ 4.181881] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 342 | [ 4.183769] systemd[1]: Starting Paths. |
| 343 | [ 4.186392] systemd[1]: Reached target Paths. |
| 344 | [ 4.187446] systemd[1]: Starting Swap. |
| 345 | [ 4.190120] systemd[1]: Reached target Swap. |
| 346 | [ 4.191140] systemd[1]: Starting Root Slice. |
| 347 | [ 4.193961] systemd[1]: Created slice Root Slice. |
| 348 | [ 4.195105] systemd[1]: Starting User and Session Slice. |
| 349 | [ 4.198388] systemd[1]: Created slice User and Session Slice. |
| 350 | [ 4.199771] systemd[1]: Starting Delayed Shutdown Socket. |
| 351 | [ 4.203013] systemd[1]: Listening on Delayed Shutdown Socket. |
| 352 | [ 4.204427] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| 353 | [ 4.209111] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 354 | [ 4.210822] systemd[1]: Starting Journal Socket (/dev/log). |
| 355 | [ 4.214920] systemd[1]: Listening on Journal Socket (/dev/log). |
| 356 | [ 4.216368] systemd[1]: Starting udev Kernel Socket. |
| 357 | [ 4.219455] systemd[1]: Listening on udev Kernel Socket. |
| 358 | [ 4.220763] systemd[1]: Starting udev Control Socket. |
| 359 | [ 4.223826] systemd[1]: Listening on udev Control Socket. |
| 360 | [ 4.225151] systemd[1]: Starting Journal Socket. |
| 361 | [ 4.228089] systemd[1]: Listening on Journal Socket. |
| 362 | [ 4.229308] systemd[1]: Starting System Slice. |
| 363 | [ 4.232159] systemd[1]: Created slice System Slice. |
| 364 | [ 4.233357] systemd[1]: Starting system-getty.slice. |
| 365 | [ 4.236463] systemd[1]: Created slice system-getty.slice. |
| 366 | [ 4.237775] systemd[1]: Starting system-serial\x2dgetty.slice. |
| 367 | [ 4.241213] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| 368 | [ 4.242764] systemd[1]: Starting Increase datagram queue length... |
| 369 | [ 4.253520] systemd[1]: Starting Load Kernel Modules... |
| 370 | [ 4.257114] systemd[1]: Mounting Huge Pages File System... |
| 371 | [ 4.262265] systemd[1]: Mounting POSIX Message Queue File System... |
| 372 | [ 4.304643] random: nonblocking pool is initialized |
| 373 | [ 4.479221] systemd[1]: Started Set Up Additional Binary Formats. |
| 374 | [ 4.528731] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 375 | [ 4.536765] systemd[1]: Mounting Debug File System... |
| 376 | [ 4.547028] systemd[1]: Starting udev Coldplug all Devices... |
| 377 | [ 4.569336] systemd[1]: Starting Slices. |
| 378 | [ 4.578408] systemd[1]: Reached target Slices. |
| 379 | [ 4.580187] systemd[1]: Starting Remount Root and Kernel File Systems... |
| 380 | [ 4.622921] systemd[1]: Mounted Debug File System. |
| 381 | [ 4.632047] systemd[1]: Mounted POSIX Message Queue File System. |
| 382 | [ 4.639776] systemd[1]: Mounted Huge Pages File System. |
| 383 | [ 4.646571] systemd[1]: Started Increase datagram queue length. |
| 384 | [ 4.651431] systemd[1]: Started Load Kernel Modules. |
| 385 | [ 4.656208] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| 386 | [ 4.661254] systemd[1]: Started Remount Root and Kernel File Systems. |
| 387 | [ 4.682801] systemd[1]: Started udev Coldplug all Devices. |
| 388 | [ 4.717468] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| 389 | [ 4.719401] systemd[1]: Starting Load/Save Random Seed... |
| 390 | [ 4.722777] systemd[1]: Starting Create Static Device Nodes in /dev... |
| 391 | [ 4.727174] systemd[1]: Starting Apply Kernel Variables... |
| 392 | [ 4.735081] systemd[1]: Mounted Configuration File System. |
| 393 | [ 4.737026] systemd[1]: Mounted FUSE Control File System. |
| 394 | [ 4.742668] systemd[1]: Starting Syslog Socket. |
| 395 | [ 4.757111] systemd[1]: Listening on Syslog Socket. |
| 396 | [ 4.758634] systemd[1]: Starting Sockets. |
| 397 | [ 4.765377] systemd[1]: Reached target Sockets. |
| 398 | [ 4.767234] systemd[1]: Starting Journal Service... |
| 399 | [ 4.780951] systemd[1]: Started Journal Service. |
| 400 | [ 5.069065] systemd-udevd[125]: starting version 215 |
| 401 | [ 5.357234] systemd-journald[123]: Received request to flush runtime journal from PID 1 |
| 402 | [ 6.099668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| 403 | [ 6.102129] ACPI: Power Button [PWRF] |
| 404 | [ 6.123402] Floppy drive(s): fd0 is 1.44M |
| 405 | [ 6.140652] parport_pc 00:03: reported by Plug and Play ACPI |
| 406 | [ 6.142656] FDC 0 is a S82078B |
| 407 | [ 6.145757] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] |
| 408 | [ 6.197316] input: PC Speaker as /devices/platform/pcspkr/input/input3 |
| 409 | [ 6.206306] SCSI subsystem initialized |
| 410 | [ 6.207942] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101) |
| 411 | [ 6.215664] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16 |
| 412 | [ 6.220631] i801_smbus 0000:00:1f.3: Enabling SMBus device |
| 413 | [ 6.224773] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt |
| 414 | [ 6.284312] [drm] Initialized drm 1.1.0 20060810 |
| 415 | [ 6.314466] libata version 3.00 loaded. |
| 416 | [ 6.416504] ppdev: user-space parallel port driver |
| 417 | [ 6.428617] iTCO_vendor_support: vendor-support=0 |
| 418 | [ 6.442955] ahci 0000:00:1f.2: version 3.0 |
| 419 | [ 6.445472] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X |
| 420 | [ 6.446588] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode |
| 421 | [ 6.448069] ahci 0000:00:1f.2: flags: ncq only |
| 422 | [ 6.459913] scsi0 : ahci |
| 423 | [ 6.461219] scsi1 : ahci |
| 424 | [ 6.462602] scsi2 : ahci |
| 425 | [ 6.463933] scsi3 : ahci |
| 426 | [ 6.469287] scsi4 : ahci |
| 427 | [ 6.470706] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| 428 | [ 6.471761] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) |
| 429 | [ 6.472849] iTCO_wdt: timeout value out of range, using 30 |
| 430 | [ 6.474903] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 431 | [ 6.478451] scsi5 : ahci |
| 432 | [ 6.479089] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40 |
| 433 | [ 6.480234] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40 |
| 434 | [ 6.481358] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40 |
| 435 | [ 6.482471] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40 |
| 436 | [ 6.483580] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40 |
| 437 | [ 6.484699] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40 |
| 438 | [ 6.804965] ata6: SATA link down (SStatus 0 SControl 300) |
| 439 | [ 6.810241] ata5: SATA link down (SStatus 0 SControl 300) |
| 440 | [ 6.812068] ata1: SATA link down (SStatus 0 SControl 300) |
| 441 | [ 6.813993] ata3: SATA link down (SStatus 0 SControl 300) |
| 442 | [ 6.818632] ata4: SATA link down (SStatus 0 SControl 300) |
| 443 | [ 6.820491] ata2: SATA link down (SStatus 0 SControl 300) |
| 444 | [ 7.088110] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 |
| 445 | [ 7.755092] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| 446 | [ 38.278833] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |
| 447 | [ 193.396160] nfs: server 10.100.1.1 not responding, still trying |
| 448 | [ 193.481527] nfs: server 10.100.1.1 OK |