Raptor Engineering Automated Coreboot Test Stand | a20f176 | 2016-01-18 02:10:11 +0000 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| 5 | [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bfffffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable |
| 13 | [ 0.000000] NX (Execute Disable) protection: active |
| 14 | [ 0.000000] SMBIOS 2.7 present. |
| 15 | [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 01/18/2016 |
| 16 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 17 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 18 | [ 0.000000] AGP: No AGP bridge found |
| 19 | [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 |
| 20 | [ 0.000000] MTRR default type: uncachable |
| 21 | [ 0.000000] MTRR fixed ranges enabled: |
| 22 | [ 0.000000] 00000-9FFFF write-back |
| 23 | [ 0.000000] A0000-BFFFF uncachable |
| 24 | [ 0.000000] C0000-FFFFF write-back |
| 25 | [ 0.000000] MTRR variable ranges enabled: |
| 26 | [ 0.000000] 0 base 0000000000 mask FF80000000 write-back |
| 27 | [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back |
| 28 | [ 0.000000] 2 base 00F8000000 mask FFFC000000 write-combining |
| 29 | [ 0.000000] 3 disabled |
| 30 | [ 0.000000] 4 disabled |
| 31 | [ 0.000000] 5 disabled |
| 32 | [ 0.000000] 6 disabled |
| 33 | [ 0.000000] 7 disabled |
| 34 | [ 0.000000] TOM2: 0000000140000000 aka 5120M |
| 35 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 36 | [ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000 |
| 37 | [ 0.000000] found SMP MP-table at [mem 0x000f0c70-0x000f0c7f] mapped at [ffff8800000f0c70] |
| 38 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 39 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 40 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 41 | [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| 42 | [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| 43 | [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| 44 | [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] |
| 45 | [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M |
| 46 | [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| 47 | [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] |
| 48 | [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M |
| 49 | [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] |
| 50 | [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M |
| 51 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff] |
| 52 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 53 | [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M |
| 54 | [ 0.000000] [mem 0xbfe00000-0xbff9ffff] page 4k |
| 55 | [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| 56 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 57 | [ 0.000000] ACPI: RSDP 0x00000000000F0E10 000024 (v02 CORE ) |
| 58 | [ 0.000000] ACPI: XSDT 0x00000000BFFB90E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 59 | [ 0.000000] ACPI: FACP 0x00000000BFFBB8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 60 | [ 0.000000] ACPI: DSDT 0x00000000BFFB9280 002648 (v02 ASUS COREBOOT 00000001 INTL 20150619) |
| 61 | [ 0.000000] ACPI: FACS 0x00000000BFFB9240 000040 |
| 62 | [ 0.000000] ACPI: SSDT 0x00000000BFFBB9D0 0006BD (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 63 | [ 0.000000] ACPI: TCPA 0x00000000BFFBC090 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 64 | [ 0.000000] ACPI: APIC 0x00000000BFFBC0D0 00008E (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 65 | [ 0.000000] ACPI: SRAT 0x00000000BFFBC160 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 66 | [ 0.000000] ACPI: SLIT 0x00000000BFFBC250 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 67 | [ 0.000000] ACPI: HPET 0x00000000BFFBC280 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 68 | [ 0.000000] ACPI: SRAT 0x00000000BFFBC2C0 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 69 | [ 0.000000] ACPI: SLIT 0x00000000BFFBC3B0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 70 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 71 | [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 |
| 72 | [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 |
| 73 | [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 |
| 74 | [ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1 |
| 75 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| 76 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| 77 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| 78 | [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| 79 | [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| 80 | [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| 81 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| 82 | [ 0.000000] NODE_DATA [mem 0x13fff7000-0x13fffbfff] |
| 83 | [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0 |
| 84 | [ 0.000000] Zone ranges: |
| 85 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 86 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 87 | [ 0.000000] Normal [mem 0x100000000-0x13fffffff] |
| 88 | [ 0.000000] Movable zone start for each node |
| 89 | [ 0.000000] Early memory node ranges |
| 90 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 91 | [ 0.000000] node 0: [mem 0x00100000-0xbff9ffff] |
| 92 | [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| 93 | [ 0.000000] On node 0 totalpages: 1048382 |
| 94 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 95 | [ 0.000000] DMA zone: 21 pages reserved |
| 96 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 97 | [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| 98 | [ 0.000000] DMA32 zone: 782240 pages, LIFO batch:31 |
| 99 | [ 0.000000] Normal zone: 3584 pages used for memmap |
| 100 | [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| 101 | [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| 102 | [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| 103 | [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 |
| 104 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 105 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) |
| 106 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) |
| 107 | [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) |
| 108 | [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) |
| 109 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 110 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| 111 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| 112 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| 113 | [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) |
| 114 | [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 |
| 115 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 116 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| 117 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| 118 | [ 0.000000] ACPI: IRQ9 used by override. |
| 119 | [ 0.000000] ACPI: IRQ14 used by override. |
| 120 | [ 0.000000] ACPI: IRQ15 used by override. |
| 121 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 122 | [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| 123 | [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| 124 | [ 0.000000] nr_irqs_gsi: 40 |
| 125 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 126 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 127 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 128 | [ 0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbfffffff] |
| 129 | [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff] |
| 130 | [ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices |
| 131 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 132 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2 |
| 133 | [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| 134 | [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| 135 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| 136 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034026 |
| 137 | [ 0.000000] Policy zone: Normal |
| 138 | [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| 139 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 140 | [ 0.000000] AGP: Checking aperture... |
| 141 | [ 0.000000] AGP: No AGP bridge found |
| 142 | [ 0.000000] AGP: Node 0: aperture [bus addr 0xeb80000000-0xeb81ffffff] (32MB) |
| 143 | [ 0.000000] Aperture beyond 4GB. Ignoring. |
| 144 | [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| 145 | [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| 146 | [ 0.000000] AGP: This costs you 64MB of RAM |
| 147 | [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| 148 | [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| 149 | [ 0.000000] Memory: 3983824K/4193528K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 209704K reserved) |
| 150 | [ 0.000000] Hierarchical RCU implementation. |
| 151 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 152 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| 153 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| 154 | [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 |
| 155 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 156 | [ 0.000000] Console: colour VGA+ 80x25 |
| 157 | [ 0.000000] console [ttyS0] enabled |
| 158 | [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| 159 | [ 0.000000] hpet clockevent registered |
| 160 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 161 | [ 0.000000] tsc: Detected 3015.543 MHz processor |
| 162 | [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized |
| 163 | [ 0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.08 BogoMIPS (lpj=12062172) |
| 164 | [ 0.020001] pid_max: default: 32768 minimum: 301 |
| 165 | [ 0.024011] ACPI: Core revision 20140424 |
| 166 | [ 0.029306] ACPI: All ACPI Tables successfully acquired |
| 167 | [ 0.032232] Security Framework initialized |
| 168 | [ 0.036013] AppArmor: AppArmor disabled by boot time parameter |
| 169 | [ 0.040001] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 170 | [ 0.048121] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 171 | [ 0.057874] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| 172 | [ 0.061253] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| 173 | [ 0.064011] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| 174 | [ 0.068350] Initializing cgroup subsys memory |
| 175 | [ 0.072010] Initializing cgroup subsys devices |
| 176 | [ 0.076010] Initializing cgroup subsys freezer |
| 177 | [ 0.080003] Initializing cgroup subsys net_cls |
| 178 | [ 0.084006] Initializing cgroup subsys blkio |
| 179 | [ 0.088005] Initializing cgroup subsys perf_event |
| 180 | [ 0.092003] Initializing cgroup subsys net_prio |
| 181 | [ 0.096028] tseg: 0000000000 |
| 182 | [ 0.096034] CPU: Physical Processor ID: 0 |
| 183 | [ 0.100001] CPU: Processor Core ID: 0 |
| 184 | [ 0.104002] mce: CPU supports 5 MCE banks |
| 185 | [ 0.108008] LVT offset 0 assigned for vector 0xf9 |
| 186 | [ 0.112010] process: using AMD E400 aware idle routine |
| 187 | [ 0.116003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| 188 | Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| 189 | tlb_flushall_shift: 6 |
| 190 | [ 0.124084] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| 191 | [ 0.132699] ftrace: allocating 21601 entries in 85 pages |
| 192 | [ 0.144434] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| 193 | [ 0.190587] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03) |
| 194 | [ 0.200000] Performance Events: AMD PMU driver. |
| 195 | [ 0.200002] ... version: 0 |
| 196 | [ 0.204000] ... bit width: 48 |
| 197 | [ 0.208000] ... generic registers: 4 |
| 198 | [ 0.212000] ... value mask: 0000ffffffffffff |
| 199 | [ 0.216000] ... max period: 00007fffffffffff |
| 200 | [ 0.220000] ... fixed-purpose events: 0 |
| 201 | [ 0.224000] ... event mask: 000000000000000f |
| 202 | [ 0.229567] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 203 | [ 0.232155] x86: Booting SMP configuration: |
| 204 | [ 0.236002] .... node #0, CPUs: #1 #2 #3 |
| 205 | [ 0.508029] x86: Booted up 1 node, 4 CPUs |
| 206 | [ 0.512002] smpboot: Total of 4 processors activated (24123.61 BogoMIPS) |
| 207 | [ 0.520115] devtmpfs: initialized |
| 208 | [ 0.529276] pinctrl core: initialized pinctrl subsystem |
| 209 | [ 0.532107] NET: Registered protocol family 16 |
| 210 | [ 0.536134] cpuidle: using governor ladder |
| 211 | [ 0.540002] cpuidle: using governor menu |
| 212 | [ 0.544005] node 0 link 1: io port [1000, 5fff] |
| 213 | [ 0.544007] TOM: 00000000c0000000 aka 3072M |
| 214 | [ 0.548002] node 0 link 1: mmio [a0000, bffff] |
| 215 | [ 0.548004] node 0 link 1: mmio [fc000000, fc5fffff] |
| 216 | [ 0.548006] node 0 link 1: mmio [f8000000, fbffffff] |
| 217 | [ 0.548007] TOM2: 0000000140000000 aka 5120M |
| 218 | [ 0.552002] bus: [bus 00-08] on node 0 link 1 |
| 219 | [ 0.552004] bus: 00 [io 0x0000-0xffff] |
| 220 | [ 0.552005] bus: 00 [mem 0x000a0000-0x000bffff] |
| 221 | [ 0.552006] bus: 00 [mem 0xc0000000-0xffffffff] |
| 222 | [ 0.552007] bus: 00 [mem 0x140000000-0xfcffffffff] |
| 223 | [ 0.552055] ACPI: bus type PCI registered |
| 224 | [ 0.556002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 225 | [ 0.564090] PCI: Using configuration type 1 for base access |
| 226 | [ 0.584084] ACPI: Added _OSI(Module Device) |
| 227 | [ 0.588002] ACPI: Added _OSI(Processor Device) |
| 228 | [ 0.592001] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 229 | [ 0.596001] ACPI: Added _OSI(Processor Aggregator Device) |
| 230 | [ 0.605021] ACPI: Interpreter enabled |
| 231 | [ 0.608009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| 232 | [ 0.616001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| 233 | [ 0.626188] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| 234 | [ 0.636004] ACPI: (supports S0 S1 S5) |
| 235 | [ 0.640001] ACPI: Using IOAPIC for interrupt routing |
| 236 | [ 0.644029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 237 | [ 0.657439] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08]) |
| 238 | [ 0.660005] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] |
| 239 | [ 0.668010] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] |
| 240 | [ 0.681585] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| 241 | [ 0.688005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| 242 | [ 0.700118] PCI host bridge to bus 0000:00 |
| 243 | [ 0.704003] pci_bus 0000:00: root bus resource [bus 00-08] |
| 244 | [ 0.712004] pci_bus 0000:00: root bus resource [io 0x0d00-0x5fff] |
| 245 | [ 0.716002] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| 246 | [ 0.724001] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff] |
| 247 | [ 0.732002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 248 | [ 0.736001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 249 | [ 0.744010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| 250 | [ 0.744125] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| 251 | [ 0.744131] pci 0000:00:01.0: reg 0x10: [io 0x4c00-0x4c7f] |
| 252 | [ 0.744206] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| 253 | [ 0.744212] pci 0000:00:01.1: reg 0x10: [io 0x5000-0x501f] |
| 254 | [ 0.744220] pci 0000:00:01.1: reg 0x20: [io 0x4c80-0x4cbf] |
| 255 | [ 0.744224] pci 0000:00:01.1: reg 0x24: [io 0x4cc0-0x4cff] |
| 256 | [ 0.744235] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| 257 | [ 0.744302] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| 258 | [ 0.744308] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff] |
| 259 | [ 0.744327] pci 0000:00:02.0: supports D1 D2 |
| 260 | [ 0.744329] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 261 | [ 0.744361] pci 0000:00:02.0: System wakeup disabled by ACPI |
| 262 | [ 0.748041] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| 263 | [ 0.748048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff] |
| 264 | [ 0.748072] pci 0000:00:02.1: supports D1 D2 |
| 265 | [ 0.748074] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| 266 | [ 0.748105] pci 0000:00:02.1: System wakeup disabled by ACPI |
| 267 | [ 0.756045] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| 268 | [ 0.756058] pci 0000:00:06.0: reg 0x20: [io 0x5020-0x502f] |
| 269 | [ 0.756064] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| 270 | [ 0.764001] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| 271 | [ 0.768001] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| 272 | [ 0.776001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| 273 | [ 0.784062] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| 274 | [ 0.784068] pci 0000:00:07.0: reg 0x10: [io 0x5050-0x5057] |
| 275 | [ 0.784071] pci 0000:00:07.0: reg 0x14: [io 0x5070-0x5073] |
| 276 | [ 0.784075] pci 0000:00:07.0: reg 0x18: [io 0x5058-0x505f] |
| 277 | [ 0.784078] pci 0000:00:07.0: reg 0x1c: [io 0x5074-0x5077] |
| 278 | [ 0.784082] pci 0000:00:07.0: reg 0x20: [io 0x5030-0x503f] |
| 279 | [ 0.784085] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff] |
| 280 | [ 0.784150] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| 281 | [ 0.784155] pci 0000:00:08.0: reg 0x10: [io 0x5060-0x5067] |
| 282 | [ 0.784159] pci 0000:00:08.0: reg 0x14: [io 0x5078-0x507b] |
| 283 | [ 0.784162] pci 0000:00:08.0: reg 0x18: [io 0x5068-0x506f] |
| 284 | [ 0.784165] pci 0000:00:08.0: reg 0x1c: [io 0x507c-0x507f] |
| 285 | [ 0.784169] pci 0000:00:08.0: reg 0x20: [io 0x5040-0x504f] |
| 286 | [ 0.784172] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff] |
| 287 | [ 0.784237] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| 288 | [ 0.784279] pci 0000:00:09.0: System wakeup disabled by ACPI |
| 289 | [ 0.788043] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| 290 | [ 0.788063] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 291 | [ 0.788094] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| 292 | [ 0.796041] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| 293 | [ 0.796061] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 294 | [ 0.796092] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| 295 | [ 0.800041] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| 296 | [ 0.800059] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 297 | [ 0.800090] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| 298 | [ 0.808041] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| 299 | [ 0.808060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 300 | [ 0.808091] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| 301 | [ 0.812046] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 |
| 302 | [ 0.812111] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 |
| 303 | [ 0.812172] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 |
| 304 | [ 0.812232] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 |
| 305 | [ 0.812296] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000 |
| 306 | [ 0.812362] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000 |
| 307 | [ 0.812422] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000 |
| 308 | [ 0.812483] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000 |
| 309 | [ 0.812581] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| 310 | [ 0.812591] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| 311 | [ 0.812596] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff] |
| 312 | [ 0.812602] pci 0000:01:04.0: reg 0x18: [io 0x3000-0x307f] |
| 313 | [ 0.812632] pci 0000:01:04.0: supports D1 D2 |
| 314 | [ 0.812683] pci 0000:00:09.0: PCI bridge to [bus 01] |
| 315 | [ 0.816003] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| 316 | [ 0.816005] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| 317 | [ 0.816007] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| 318 | [ 0.816056] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| 319 | [ 0.816068] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit] |
| 320 | [ 0.816091] pci 0000:02:00.0: reg 0x30: [mem 0x0d080000-0x0d08ffff pref] |
| 321 | [ 0.816131] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| 322 | [ 0.816181] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 323 | [ 0.828007] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| 324 | [ 0.832004] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| 325 | [ 0.832054] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| 326 | [ 0.832066] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit] |
| 327 | [ 0.832127] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| 328 | [ 0.832178] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 329 | [ 0.844007] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| 330 | [ 0.848003] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| 331 | [ 0.848041] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| 332 | [ 0.852046] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400 |
| 333 | [ 0.852087] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold |
| 334 | [ 0.852135] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 335 | [ 0.864005] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| 336 | [ 0.868002] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| 337 | [ 0.868005] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| 338 | [ 0.868049] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400 |
| 339 | [ 0.868098] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold |
| 340 | [ 0.868144] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 341 | [ 0.880008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400 |
| 342 | [ 0.880056] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold |
| 343 | [ 0.880102] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 344 | [ 0.888020] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| 345 | [ 0.892005] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| 346 | [ 0.892009] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| 347 | [ 0.892069] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000 |
| 348 | [ 0.892082] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff] |
| 349 | [ 0.892091] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff] |
| 350 | [ 0.892100] pci 0000:07:00.0: reg 0x18: [io 0x1000-0x101f] |
| 351 | [ 0.892132] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref] |
| 352 | [ 0.892173] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold |
| 353 | [ 0.892235] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000 |
| 354 | [ 0.892247] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff] |
| 355 | [ 0.892256] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff] |
| 356 | [ 0.892265] pci 0000:07:00.1: reg 0x18: [io 0x1020-0x103f] |
| 357 | [ 0.892297] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref] |
| 358 | [ 0.892338] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold |
| 359 | [ 0.892393] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 360 | [ 0.904009] pci 0000:06:00.0: PCI bridge to [bus 07] |
| 361 | [ 0.908005] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| 362 | [ 0.908009] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| 363 | [ 0.908071] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000 |
| 364 | [ 0.908083] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff] |
| 365 | [ 0.908092] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff] |
| 366 | [ 0.908101] pci 0000:08:00.0: reg 0x18: [io 0x2000-0x201f] |
| 367 | [ 0.908133] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref] |
| 368 | [ 0.908175] pci 0000:08:00.0: PME# supported from D0 D3hot |
| 369 | [ 0.908237] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000 |
| 370 | [ 0.908248] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff] |
| 371 | [ 0.908258] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff] |
| 372 | [ 0.908267] pci 0000:08:00.1: reg 0x18: [io 0x2020-0x203f] |
| 373 | [ 0.908299] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref] |
| 374 | [ 0.908341] pci 0000:08:00.1: PME# supported from D0 D3hot |
| 375 | [ 0.908396] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 376 | [ 0.920009] pci 0000:06:01.0: PCI bridge to [bus 08] |
| 377 | [ 0.924005] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| 378 | [ 0.924009] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| 379 | [ 0.924044] pci_bus 0000:00: on NUMA node 0 |
| 380 | [ 0.924102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| 381 | [ 0.932243] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| 382 | [ 0.937547] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| 383 | [ 0.945599] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| 384 | [ 0.952245] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| 385 | [ 0.960056] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| 386 | [ 0.966710] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| 387 | [ 0.973265] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| 388 | [ 0.977547] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| 389 | [ 0.986433] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| 390 | [ 0.993879] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| 391 | [ 1.000244] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| 392 | [ 1.005541] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| 393 | [ 1.013187] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| 394 | [ 1.020246] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| 395 | [ 1.026710] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| 396 | [ 1.034710] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| 397 | [ 1.043371] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| 398 | [ 1.049598] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| 399 | [ 1.056055] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| 400 | [ 1.061876] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| 401 | [ 1.068401] ACPI: Enabled 1 GPEs in block 00 to 1F |
| 402 | [ 1.072093] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| 403 | [ 1.076000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| 404 | [ 1.084008] vgaarb: loaded |
| 405 | [ 1.088001] vgaarb: bridge control possible 0000:01:04.0 |
| 406 | [ 1.096041] PCI: Using ACPI for IRQ routing |
| 407 | [ 1.100004] PCI: pci_cache_line_size set to 64 bytes |
| 408 | [ 1.100064] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 409 | [ 1.100067] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff] |
| 410 | [ 1.100258] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| 411 | [ 1.104005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| 412 | [ 1.112190] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| 413 | [ 1.120041] Switched to clocksource hpet |
| 414 | [ 1.132680] pnp: PnP ACPI init |
| 415 | [ 1.135769] ACPI: bus type PNP registered |
| 416 | [ 1.140170] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 417 | [ 1.140222] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| 418 | [ 1.140276] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| 419 | [ 1.140330] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| 420 | [ 1.140359] pnp 00:04: [dma 2] |
| 421 | [ 1.140384] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| 422 | [ 1.140400] pnp: PnP ACPI: found 5 devices |
| 423 | [ 1.144497] ACPI: bus type PNP unregistered |
| 424 | [ 1.155899] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d080000-0x0d08ffff pref]: no compatible bridge window |
| 425 | [ 1.165858] pci 0000:00:09.0: PCI bridge to [bus 01] |
| 426 | [ 1.170818] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| 427 | [ 1.176912] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| 428 | [ 1.183697] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| 429 | [ 1.190921] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref] |
| 430 | [ 1.198136] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| 431 | [ 1.203102] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| 432 | [ 1.209888] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| 433 | [ 1.214854] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| 434 | [ 1.221640] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| 435 | [ 1.226607] pci 0000:06:00.0: PCI bridge to [bus 07] |
| 436 | [ 1.231572] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| 437 | [ 1.237667] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| 438 | [ 1.244457] pci 0000:06:01.0: PCI bridge to [bus 08] |
| 439 | [ 1.249415] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| 440 | [ 1.255511] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| 441 | [ 1.262301] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| 442 | [ 1.267520] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| 443 | [ 1.273615] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| 444 | [ 1.280406] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| 445 | [ 1.285625] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| 446 | [ 1.291718] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| 447 | [ 1.298505] pci_bus 0000:00: resource 4 [io 0x0d00-0x5fff] |
| 448 | [ 1.298507] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| 449 | [ 1.298509] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff] |
| 450 | [ 1.298511] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] |
| 451 | [ 1.298513] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| 452 | [ 1.298516] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] |
| 453 | [ 1.298517] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff] |
| 454 | [ 1.298519] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| 455 | [ 1.298522] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff] |
| 456 | [ 1.298524] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff] |
| 457 | [ 1.298526] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] |
| 458 | [ 1.298528] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff] |
| 459 | [ 1.298531] pci_bus 0000:06: resource 0 [io 0x1000-0x2fff] |
| 460 | [ 1.298532] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff] |
| 461 | [ 1.298535] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] |
| 462 | [ 1.298536] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff] |
| 463 | [ 1.298539] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] |
| 464 | [ 1.298541] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff] |
| 465 | [ 1.298616] NET: Registered protocol family 2 |
| 466 | [ 1.303291] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| 467 | [ 1.310713] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| 468 | [ 1.317625] TCP: Hash tables configured (established 32768 bind 32768) |
| 469 | [ 1.324235] TCP: reno registered |
| 470 | [ 1.327472] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| 471 | [ 1.333531] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| 472 | [ 1.340139] NET: Registered protocol family 1 |
| 473 | [ 1.344786] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| 474 | [ 1.350759] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| 475 | [ 1.356601] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 476 | [ 1.362107] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 477 | [ 1.367588] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| 478 | [ 1.373162] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 479 | [ 1.378671] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 480 | [ 1.384158] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| 481 | [ 1.389732] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 482 | [ 1.395243] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 483 | [ 1.400730] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| 484 | [ 1.406303] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 485 | [ 1.411817] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 486 | [ 1.417299] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| 487 | [ 1.422873] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 488 | [ 1.428374] pci 0000:01:04.0: Video device with shadowed ROM |
| 489 | [ 1.428399] PCI: CLS 64 bytes, default 64 |
| 490 | [ 1.428480] Unpacking initramfs... |
| 491 | [ 1.595724] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| 492 | [ 1.603368] PCI-DMA: Disabling AGP. |
| 493 | [ 1.607009] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| 494 | [ 1.612577] PCI-DMA: using GART IOMMU. |
| 495 | [ 1.616331] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| 496 | [ 1.626498] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| 497 | [ 1.634301] microcode: AMD CPU family 0xf not supported |
| 498 | [ 1.639911] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| 499 | [ 1.646152] audit: initializing netlink subsys (disabled) |
| 500 | [ 1.651586] audit: type=2000 audit(1453082903.648:1): initialized |
| 501 | [ 1.658117] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 502 | [ 1.664490] zbud: loaded |
| 503 | [ 1.667224] VFS: Disk quotas dquot_6.5.2 |
| 504 | [ 1.671166] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 505 | [ 1.677678] msgmni has been set to 7926 |
| 506 | [ 1.681945] alg: No test for stdrng (krng) |
| 507 | [ 1.686089] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 508 | [ 1.693554] io scheduler noop registered |
| 509 | [ 1.697476] io scheduler deadline registered |
| 510 | [ 1.701794] io scheduler cfq registered (default) |
| 511 | [ 1.706803] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 512 | [ 1.712393] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 513 | [ 1.719093] GHES: HEST is not enabled! |
| 514 | [ 1.722922] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 515 | [ 1.749457] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 516 | [ 1.777068] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| 517 | [ 1.784796] Linux agpgart interface v0.103 |
| 518 | [ 1.789007] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| 519 | [ 1.799250] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 520 | [ 1.804262] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 521 | [ 1.809534] mousedev: PS/2 mouse device common for all mice |
| 522 | [ 1.815193] rtc_cmos rtc_cmos: RTC can wake from S4 |
| 523 | [ 1.820229] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| 524 | [ 1.826607] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| 525 | [ 1.834451] ledtrig-cpu: registered to indicate activity on CPUs |
| 526 | [ 1.840551] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| 527 | [ 1.846993] AMD IOMMUv2 functionality not available on this system |
| 528 | [ 1.853275] TCP: cubic registered |
| 529 | [ 1.856665] NET: Registered protocol family 10 |
| 530 | [ 1.861404] mip6: Mobile IPv6 |
| 531 | [ 1.864382] NET: Registered protocol family 17 |
| 532 | [ 1.868826] mpls_gso: MPLS GSO support |
| 533 | [ 1.872989] registered taskstats version 1 |
| 534 | [ 1.877685] rtc_cmos rtc_cmos: setting system clock to 2016-01-18 02:08:25 UTC (1453082905) |
| 535 | [ 1.886093] PM: Hibernation image not present or could not be loaded. |
| 536 | [ 1.887392] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| 537 | [ 1.895245] Write protecting the kernel read-only data: 8192k |
| 538 | [ 1.903403] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| 539 | [ 1.911681] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| 540 | [ 1.927989] systemd-udevd[72]: starting version 215 |
| 541 | [ 1.933256] random: systemd-udevd urandom read with 3 bits of entropy available |
| 542 | [ 1.950095] pps_core: LinuxPPS API ver. 1 registered |
| 543 | [ 1.955090] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| 544 | [ 1.964349] ACPI: bus type USB registered |
| 545 | [ 1.968412] usbcore: registered new interface driver usbfs |
| 546 | [ 1.968442] PTP clock support registered |
| 547 | [ 1.977833] usbcore: registered new interface driver hub |
| 548 | [ 1.983353] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| 549 | [ 1.989219] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. |
| 550 | [ 1.993211] usbcore: registered new device driver usb |
| 551 | [ 2.000465] tg3.c:v3.137 (May 11, 2014) |
| 552 | [ 2.001223] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19 |
| 553 | [ 2.001343] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 554 | [ 2.001371] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X |
| 555 | [ 2.019377] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| 556 | [ 2.019471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 557 | [ 2.031796] ehci-pci: EHCI PCI platform driver |
| 558 | [ 2.031793] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| 559 | [ 2.042072] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 560 | [ 2.042251] ehci-pci 0000:00:02.1: EHCI Host Controller |
| 561 | [ 2.042257] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| 562 | [ 2.042270] ehci-pci 0000:00:02.1: debug port 1 |
| 563 | [ 2.042303] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| 564 | [ 2.042325] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000 |
| 565 | [ 2.052022] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| 566 | [ 2.052062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 567 | [ 2.052063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 568 | [ 2.052064] usb usb1: Product: EHCI Host Controller |
| 569 | [ 2.052065] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| 570 | [ 2.052066] usb usb1: SerialNumber: 0000:00:02.1 |
| 571 | [ 2.052310] hub 1-0:1.0: USB hub found |
| 572 | [ 2.052318] hub 1-0:1.0: 10 ports detected |
| 573 | [ 2.114436] ohci-pci: OHCI PCI platform driver |
| 574 | [ 2.119017] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| 575 | [ 2.124593] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| 576 | [ 2.130341] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3 |
| 577 | [ 2.130343] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| 578 | [ 2.130345] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| 579 | [ 2.130346] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| 580 | [ 2.130411] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| 581 | [ 2.130559] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| 582 | [ 2.177898] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000 |
| 583 | [ 2.207087] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9 |
| 584 | [ 2.217347] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| 585 | [ 2.227077] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| 586 | [ 2.234901] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| 587 | [ 2.238076] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| 588 | [ 2.238077] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 589 | [ 2.238079] usb usb2: Product: OHCI PCI host controller |
| 590 | [ 2.238080] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| 591 | [ 2.238081] usb usb2: SerialNumber: 0000:00:02.0 |
| 592 | [ 2.238228] hub 2-0:1.0: USB hub found |
| 593 | [ 2.238238] hub 2-0:1.0: 10 ports detected |
| 594 | [ 2.284158] e1000e 0000:07:00.0 eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9 |
| 595 | [ 2.292069] e1000e 0000:07:00.0 eth2: Intel(R) PRO/1000 Network Connection |
| 596 | [ 2.299020] e1000e 0000:07:00.0 eth2: MAC: 0, PHY: 4, PBA No: D72468-003 |
| 597 | [ 2.305917] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18 |
| 598 | [ 2.311751] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 599 | [ 2.321070] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X |
| 600 | [ 2.496810] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8 |
| 601 | [ 2.504724] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection |
| 602 | [ 2.511673] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003 |
| 603 | [ 2.518468] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 604 | [ 2.527782] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X |
| 605 | [ 2.700729] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb |
| 606 | [ 2.708641] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection |
| 607 | [ 2.715591] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003 |
| 608 | [ 2.722381] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 609 | [ 2.731691] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X |
| 610 | [ 2.904766] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca |
| 611 | [ 2.912687] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection |
| 612 | [ 2.919639] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003 |
| 613 | [ 2.929800] FS-Cache: Loaded |
| 614 | [ 2.935744] RPC: Registered named UNIX socket transport module. |
| 615 | [ 2.942189] RPC: Registered udp transport module. |
| 616 | [ 2.948255] RPC: Registered tcp transport module. |
| 617 | [ 2.952966] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 618 | [ 2.963631] FS-Cache: Netfs 'nfs' registered for caching |
| 619 | [ 2.976664] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| 620 | [ 3.024090] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 621 | [ 4.750754] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| 622 | [ 4.753990] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| 623 | [ 4.753990] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 624 | [ 5.463340] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| 625 | [ 5.476824] systemd[1]: Detected architecture 'x86-64'. |
| 626 | [ 5.691928] systemd[1]: Inserted module 'autofs4' |
| 627 | [ 5.697405] systemd[1]: Set hostname to <cb-test-tgt>. |
| 628 | [ 5.768762] random: nonblocking pool is initialized |
| 629 | [ 5.911268] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| 630 | [ 5.924015] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| 631 | [ 5.939261] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| 632 | [ 5.946989] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 633 | [ 5.954562] systemd[1]: Expecting device dev-ttyS0.device... |
| 634 | [ 5.968144] systemd[1]: Starting Remote File Systems (Pre). |
| 635 | [ 5.984081] systemd[1]: Reached target Remote File Systems (Pre). |
| 636 | [ 5.990210] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| 637 | [ 6.012062] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 638 | [ 6.021499] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| 639 | [ 6.029592] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 640 | [ 6.037519] systemd[1]: Starting Paths. |
| 641 | [ 6.052056] systemd[1]: Reached target Paths. |
| 642 | [ 6.056435] systemd[1]: Starting Encrypted Volumes. |
| 643 | [ 6.072057] systemd[1]: Reached target Encrypted Volumes. |
| 644 | [ 6.077471] systemd[1]: Starting Swap. |
| 645 | [ 6.092050] systemd[1]: Reached target Swap. |
| 646 | [ 6.096334] systemd[1]: Starting Root Slice. |
| 647 | [ 6.108057] systemd[1]: Created slice Root Slice. |
| 648 | [ 6.112778] systemd[1]: Starting User and Session Slice. |
| 649 | [ 6.128095] systemd[1]: Created slice User and Session Slice. |
| 650 | [ 6.133879] systemd[1]: Starting Delayed Shutdown Socket. |
| 651 | [ 6.148082] systemd[1]: Listening on Delayed Shutdown Socket. |
| 652 | [ 6.153865] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| 653 | [ 6.172050] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 654 | [ 6.179026] systemd[1]: Starting Journal Socket (/dev/log). |
| 655 | [ 6.196045] systemd[1]: Listening on Journal Socket (/dev/log). |
| 656 | [ 6.201986] systemd[1]: Starting udev Kernel Socket. |
| 657 | [ 6.216052] systemd[1]: Listening on udev Kernel Socket. |
| 658 | [ 6.221388] systemd[1]: Starting udev Control Socket. |
| 659 | [ 6.236040] systemd[1]: Listening on udev Control Socket. |
| 660 | [ 6.241453] systemd[1]: Starting Journal Socket. |
| 661 | [ 6.256045] systemd[1]: Listening on Journal Socket. |
| 662 | [ 6.261044] systemd[1]: Starting System Slice. |
| 663 | [ 6.276043] systemd[1]: Created slice System Slice. |
| 664 | [ 6.280931] systemd[1]: Starting system-getty.slice. |
| 665 | [ 6.296051] systemd[1]: Created slice system-getty.slice. |
| 666 | [ 6.301465] systemd[1]: Starting system-serial\x2dgetty.slice. |
| 667 | [ 6.316052] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| 668 | [ 6.322352] systemd[1]: Starting Increase datagram queue length... |
| 669 | [ 6.340548] systemd[1]: Mounting Huge Pages File System... |
| 670 | [ 6.356519] systemd[1]: Starting udev Coldplug all Devices... |
| 671 | [ 6.565813] systemd[1]: Starting Load Kernel Modules... |
| 672 | [ 6.580478] systemd[1]: Mounting POSIX Message Queue File System... |
| 673 | [ 6.619053] systemd[1]: Started Set Up Additional Binary Formats. |
| 674 | [ 6.625245] systemd[1]: Mounting Debug File System... |
| 675 | [ 6.640831] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 676 | [ 6.664464] systemd[1]: Starting Slices. |
| 677 | [ 6.676050] systemd[1]: Reached target Slices. |
| 678 | [ 6.680521] systemd[1]: Starting Remount Root and Kernel File Systems... |
| 679 | [ 6.704071] systemd[1]: Mounted Debug File System. |
| 680 | [ 6.720099] systemd[1]: Mounted POSIX Message Queue File System. |
| 681 | [ 6.736050] systemd[1]: Mounted Huge Pages File System. |
| 682 | [ 6.752059] systemd[1]: Started Increase datagram queue length. |
| 683 | [ 6.768070] systemd[1]: Started Load Kernel Modules. |
| 684 | [ 6.788116] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| 685 | [ 6.808053] systemd[1]: Started Remount Root and Kernel File Systems. |
| 686 | [ 6.824049] systemd[1]: Started udev Coldplug all Devices. |
| 687 | [ 6.855092] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| 688 | [ 6.862977] systemd[1]: Starting Load/Save Random Seed... |
| 689 | [ 6.876956] systemd[1]: Starting Create Static Device Nodes in /dev... |
| 690 | [ 6.892816] systemd[1]: Mounted Configuration File System. |
| 691 | [ 6.898356] systemd[1]: Starting Apply Kernel Variables... |
| 692 | [ 6.912885] systemd[1]: Mounted FUSE Control File System. |
| 693 | [ 6.918387] systemd[1]: Starting Syslog Socket. |
| 694 | [ 6.932061] systemd[1]: Listening on Syslog Socket. |
| 695 | [ 6.936991] systemd[1]: Starting Sockets. |
| 696 | [ 6.948057] systemd[1]: Reached target Sockets. |
| 697 | [ 6.952691] systemd[1]: Starting Journal Service... |
| 698 | [ 6.976091] systemd[1]: Started Journal Service. |
| 699 | [ 7.109867] systemd-udevd[154]: starting version 215 |
| 700 | [ 7.370470] systemd-journald[152]: Received request to flush runtime journal from PID 1 |
| 701 | [ 7.814211] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 702 | [ 7.825126] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| 703 | [ 7.833559] ACPI: Power Button [PWRB] |
| 704 | [ 7.837326] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| 705 | [ 7.844722] ACPI: Power Button [PWRF] |
| 706 | [ 7.867910] FDC 0 is a post-1991 82077 |
| 707 | [ 7.871856] systemd-udevd[186]: renamed network interface eth1 to rename3 |
| 708 | [ 7.936180] systemd-udevd[176]: renamed network interface eth2 to eth6 |
| 709 | [ 7.943328] SCSI subsystem initialized |
| 710 | [ 7.947301] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 |
| 711 | [ 7.956430] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 |
| 712 | [ 7.964788] EDAC MC: Ver: 3.0.0 |
| 713 | [ 7.968504] i2c i2c-0: nForce2 SMBus adapter at 0x4c80 |
| 714 | [ 7.972138] systemd-udevd[186]: renamed network interface eth1 to eth2 |
| 715 | [ 7.980327] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0 |
| 716 | [ 7.990856] libata version 3.00 loaded. |
| 717 | [ 7.993017] MCE: In-kernel MCE decoding enabled. |
| 718 | [ 7.997854] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| 719 | [ 8.005105] sata_nv 0000:00:07.0: version 3.5 |
| 720 | [ 8.005332] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| 721 | [ 8.011748] scsi0 : sata_nv |
| 722 | [ 8.014698] AMD64 EDAC driver v3.4.0 |
| 723 | [ 8.018453] scsi1 : sata_nv |
| 724 | [ 8.021299] ata1: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21 |
| 725 | [ 8.028473] ata2: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21 |
| 726 | [ 8.036382] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| 727 | [ 8.042482] scsi2 : sata_nv |
| 728 | [ 8.046226] scsi3 : sata_nv |
| 729 | [ 8.049257] ata3: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20 |
| 730 | [ 8.056395] ata4: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20 |
| 731 | [ 8.063570] pata_amd 0000:00:06.0: version 0.4.1 |
| 732 | [ 8.064009] scsi4 : pata_amd |
| 733 | [ 8.067007] scsi5 : pata_amd |
| 734 | [ 8.069954] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14 |
| 735 | [ 8.076915] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15 |
| 736 | [ 8.083954] EDAC amd64: DRAM ECC enabled. |
| 737 | [ 8.087992] EDAC amd64: K8 revF or later detected (node 0). |
| 738 | [ 8.093692] EDAC MC: DCT0 chip selects: |
| 739 | [ 8.093694] EDAC amd64: MC: 0: 0MB 1: 0MB |
| 740 | [ 8.098535] EDAC amd64: MC: 2: 0MB 3: 0MB |
| 741 | [ 8.103246] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| 742 | [ 8.107995] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| 743 | [ 8.113216] EDAC amd64: CS4: Registered DDR2 RAM |
| 744 | [ 8.117844] EDAC amd64: CS5: Registered DDR2 RAM |
| 745 | [ 8.122467] EDAC amd64: CS6: Registered DDR2 RAM |
| 746 | [ 8.127089] EDAC amd64: CS7: Registered DDR2 RAM |
| 747 | [ 8.132266] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT) |
| 748 | [ 8.142074] EDAC amd64: DRAM ECC disabled. |
| 749 | [ 8.146210] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| 750 | Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| 751 | (Note that use of the override may cause unknown side effects.) |
| 752 | [ 8.170594] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| 753 | [ 8.181898] kvm: Nested Virtualization enabled |
| 754 | [ 8.192031] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| 755 | [ 8.197094] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| 756 | [ 8.202147] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| 757 | [ 8.207198] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| 758 | [ 8.212337] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| 759 | [ 8.217389] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| 760 | [ 8.222442] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| 761 | [ 8.227573] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| 762 | [ 8.232627] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| 763 | [ 8.237682] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| 764 | [ 8.242732] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| 765 | [ 8.247871] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| 766 | [ 8.252924] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| 767 | [ 8.257976] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| 768 | [ 8.263062] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00) |
| 769 | [ 8.348022] ata1: SATA link down (SStatus 0 SControl 300) |
| 770 | [ 8.376027] ata3: SATA link down (SStatus 0 SControl 300) |
| 771 | [ 8.664035] ata2: SATA link down (SStatus 0 SControl 300) |
| 772 | [ 8.980053] ata4: SATA link down (SStatus 0 SControl 300) |
| 773 | [ 9.089505] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| 774 | [ 39.421615] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |