Gitiles
Code Review Sign In
review.coreboot.org / board-status / e1474243e7ac3464886d58d58e75f2bcee800694 / . / asus / kfsn4-dre_k8 / 4.2-624-g4af3655 / 2015-12-28T03:16:54Z / kernel_log.txt
blob: 497ce59c73fe560e50d37e6d30b95aa6b5943301 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 12/28/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
27[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
28[ 0.000000] 2 base 00F8000000 mask FFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000140000000 aka 5120M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]37[ 0.000000] found SMP MP-table at [mem 0x000f0910-0x000f091f] mapped at [ffff8800000f0910]
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
40[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
41[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
45[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
46[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
48[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
50[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
54[ 0.000000] [mem 0xbfe00000-0xbff9ffff] page 4k
55[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
56[ 0.000000] ACPI: Early table checksum verification disabled
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]57[ 0.000000] ACPI: RSDP 0x00000000000F0AB0 000024 (v02 CORE )
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]58[ 0.000000] ACPI: XSDT 0x00000000BFFB90E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
59[ 0.000000] ACPI: FACP 0x00000000BFFBB8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: DSDT 0x00000000BFFB9280 002648 (v02 ASUS COREBOOT 00000001 INTL 20150619)
61[ 0.000000] ACPI: FACS 0x00000000BFFB9240 000040
62[ 0.000000] ACPI: SSDT 0x00000000BFFBB9D0 0006BD (v02 CORE COREBOOT 0000002A CORE 0000002A)
63[ 0.000000] ACPI: TCPA 0x00000000BFFBC090 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: APIC 0x00000000BFFBC0D0 00008E (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: SRAT 0x00000000BFFBC160 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: SLIT 0x00000000BFFBC250 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: HPET 0x00000000BFFBC280 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SRAT 0x00000000BFFBC2C0 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: SLIT 0x00000000BFFBC3B0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: Local APIC address 0xfee00000
71[ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
72[ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
73[ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1
74[ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1
75[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
76[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
77[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
78[ 0.000000] NUMA: Initialized distance table, cnt=2
79[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
80[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
81[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
82[ 0.000000] NODE_DATA [mem 0x13fff7000-0x13fffbfff]
83[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
84[ 0.000000] Zone ranges:
85[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
86[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
87[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
88[ 0.000000] Movable zone start for each node
89[ 0.000000] Early memory node ranges
90[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
91[ 0.000000] node 0: [mem 0x00100000-0xbff9ffff]
92[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
93[ 0.000000] On node 0 totalpages: 1048382
94[ 0.000000] DMA zone: 56 pages used for memmap
95[ 0.000000] DMA zone: 21 pages reserved
96[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
97[ 0.000000] DMA32 zone: 10695 pages used for memmap
98[ 0.000000] DMA32 zone: 782240 pages, LIFO batch:31
99[ 0.000000] Normal zone: 3584 pages used for memmap
100[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
101[ 0.000000] Detected use of extended apic ids on hypertransport bus
102[ 0.000000] Detected use of extended apic ids on hypertransport bus
103[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
104[ 0.000000] ACPI: Local APIC address 0xfee00000
105[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
106[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
107[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
108[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
109[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
110[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
111[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
112[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
113[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
114[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
115[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
116[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
117[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
118[ 0.000000] ACPI: IRQ9 used by override.
119[ 0.000000] ACPI: IRQ14 used by override.
120[ 0.000000] ACPI: IRQ15 used by override.
121[ 0.000000] Using ACPI (MADT) for SMP configuration information
122[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
123[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
124[ 0.000000] nr_irqs_gsi: 40
125[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
127[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbfffffff]
129[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff]
130[ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices
131[ 0.000000] Booting paravirtualized kernel on bare hardware
132[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
133[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
134[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
135[ 0.000000] pcpu-alloc: [0] 0 1 2 3
136[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034026
137[ 0.000000] Policy zone: Normal
138[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
139[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
140[ 0.000000] AGP: Checking aperture...
141[ 0.000000] AGP: No AGP bridge found
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]142[ 0.000000] AGP: Node 0: aperture [bus addr 0xe982000000-0xe983ffffff] (32MB)
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]143[ 0.000000] Aperture beyond 4GB. Ignoring.
144[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
145[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
146[ 0.000000] AGP: This costs you 64MB of RAM
147[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
148[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
149[ 0.000000] Memory: 3983824K/4193528K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 209704K reserved)
150[ 0.000000] Hierarchical RCU implementation.
151[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
152[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
153[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
154[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
155[ 0.000000] spurious 8259A interrupt: IRQ7.
156[ 0.000000] Console: colour VGA+ 80x25
157[ 0.000000] console [ttyS0] enabled
158[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
159[ 0.000000] hpet clockevent registered
160[ 0.000000] tsc: Fast TSC calibration using PIT
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]161[ 0.000000] tsc: Detected 3015.468 MHz processor
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]162[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]163[ 0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6030.93 BogoMIPS (lpj=12061872)
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]164[ 0.018886] pid_max: default: 32768 minimum: 301
165[ 0.020011] ACPI: Core revision 20140424
166[ 0.025305] ACPI: All ACPI Tables successfully acquired
167[ 0.028231] Security Framework initialized
168[ 0.032013] AppArmor: AppArmor disabled by boot time parameter
169[ 0.036001] Yama: disabled by default; enable with sysctl kernel.yama.*
170[ 0.040303] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]171[ 0.049628] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
172[ 0.053248] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]173[ 0.056011] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]174[ 0.064124] Initializing cgroup subsys memory
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]175[ 0.068009] Initializing cgroup subsys devices
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]176[ 0.072010] Initializing cgroup subsys freezer
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]177[ 0.076003] Initializing cgroup subsys net_cls
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]178[ 0.080007] Initializing cgroup subsys blkio
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]179[ 0.084005] Initializing cgroup subsys perf_event
180[ 0.088002] Initializing cgroup subsys net_prio
181[ 0.092028] tseg: 0000000000
182[ 0.092035] CPU: Physical Processor ID: 0
183[ 0.096001] CPU: Processor Core ID: 0
184[ 0.100002] mce: CPU supports 5 MCE banks
185[ 0.104008] LVT offset 0 assigned for vector 0xf9
186[ 0.108004] process: using AMD E400 aware idle routine
187[ 0.112003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
188Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
189tlb_flushall_shift: 6
190[ 0.116079] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]191[ 0.124427] ftrace: allocating 21601 entries in 85 pages
192[ 0.136433] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
193[ 0.182283] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03)
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]194[ 0.192000] Performance Events: AMD PMU driver.
195[ 0.192003] ... version: 0
196[ 0.196000] ... bit width: 48
197[ 0.200000] ... generic registers: 4
198[ 0.204000] ... value mask: 0000ffffffffffff
199[ 0.208000] ... max period: 00007fffffffffff
200[ 0.212000] ... fixed-purpose events: 0
201[ 0.216000] ... event mask: 000000000000000f
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]202[ 0.221562] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]203[ 0.224154] x86: Booting SMP configuration:
204[ 0.228002] .... node #0, CPUs: #1 #2 #3
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]205[ 0.500121] x86: Booted up 1 node, 4 CPUs
206[ 0.504002] smpboot: Total of 4 processors activated (24123.46 BogoMIPS)
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]207[ 0.512104] devtmpfs: initialized
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]208[ 0.521274] pinctrl core: initialized pinctrl subsystem
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]209[ 0.524094] NET: Registered protocol family 16
210[ 0.528134] cpuidle: using governor ladder
211[ 0.532002] cpuidle: using governor menu
212[ 0.536005] node 0 link 1: io port [1000, 5fff]
213[ 0.536008] TOM: 00000000c0000000 aka 3072M
214[ 0.540002] node 0 link 1: mmio [a0000, bffff]
215[ 0.540004] node 0 link 1: mmio [fc000000, fc5fffff]
216[ 0.540006] node 0 link 1: mmio [f8000000, fbffffff]
217[ 0.540007] TOM2: 0000000140000000 aka 5120M
218[ 0.544002] bus: [bus 00-08] on node 0 link 1
219[ 0.544003] bus: 00 [io 0x0000-0xffff]
220[ 0.544005] bus: 00 [mem 0x000a0000-0x000bffff]
221[ 0.544006] bus: 00 [mem 0xc0000000-0xffffffff]
222[ 0.544007] bus: 00 [mem 0x140000000-0xfcffffffff]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]223[ 0.544054] ACPI: bus type PCI registered
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]224[ 0.548002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]225[ 0.552093] PCI: Using configuration type 1 for base access
226[ 0.572084] ACPI: Added _OSI(Module Device)
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]227[ 0.576002] ACPI: Added _OSI(Processor Device)
228[ 0.580001] ACPI: Added _OSI(3.0 _SCP Extensions)
229[ 0.584001] ACPI: Added _OSI(Processor Aggregator Device)
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]230[ 0.592932] ACPI: Interpreter enabled
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]231[ 0.596009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
232[ 0.604001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
233[ 0.614188] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
234[ 0.624004] ACPI: (supports S0 S1 S5)
235[ 0.627662] ACPI: Using IOAPIC for interrupt routing
236[ 0.628027] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]237[ 0.637295] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08])
238[ 0.640005] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]239[ 0.644011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
240[ 0.649572] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
241[ 0.652005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
242[ 0.656114] PCI host bridge to bus 0000:00
243[ 0.660003] pci_bus 0000:00: root bus resource [bus 00-08]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]244[ 0.664002] pci_bus 0000:00: root bus resource [io 0x0d00-0x5fff]
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]245[ 0.668001] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
246[ 0.672001] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff]
247[ 0.676001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
248[ 0.680001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
249[ 0.684010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]250[ 0.684124] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]251[ 0.684130] pci 0000:00:01.0: reg 0x10: [io 0x4c00-0x4c7f]
252[ 0.684204] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
253[ 0.684210] pci 0000:00:01.1: reg 0x10: [io 0x5000-0x501f]
254[ 0.684219] pci 0000:00:01.1: reg 0x20: [io 0x4c80-0x4cbf]
255[ 0.684222] pci 0000:00:01.1: reg 0x24: [io 0x4cc0-0x4cff]
256[ 0.684234] pci 0000:00:01.1: PME# supported from D3hot D3cold
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]257[ 0.684300] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]258[ 0.684306] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff]
259[ 0.684326] pci 0000:00:02.0: supports D1 D2
260[ 0.684328] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
261[ 0.684359] pci 0000:00:02.0: System wakeup disabled by ACPI
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]262[ 0.688041] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]263[ 0.688048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff]
264[ 0.688073] pci 0000:00:02.1: supports D1 D2
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]265[ 0.688074] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]266[ 0.688106] pci 0000:00:02.1: System wakeup disabled by ACPI
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]267[ 0.692045] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]268[ 0.692057] pci 0000:00:06.0: reg 0x20: [io 0x5020-0x502f]
269[ 0.692064] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
270[ 0.696001] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
271[ 0.700004] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
272[ 0.704001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
273[ 0.708063] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
274[ 0.708069] pci 0000:00:07.0: reg 0x10: [io 0x5050-0x5057]
275[ 0.708072] pci 0000:00:07.0: reg 0x14: [io 0x5070-0x5073]
276[ 0.708076] pci 0000:00:07.0: reg 0x18: [io 0x5058-0x505f]
277[ 0.708079] pci 0000:00:07.0: reg 0x1c: [io 0x5074-0x5077]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]278[ 0.708082] pci 0000:00:07.0: reg 0x20: [io 0x5030-0x503f]
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]279[ 0.708086] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff]
280[ 0.708150] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
281[ 0.708156] pci 0000:00:08.0: reg 0x10: [io 0x5060-0x5067]
282[ 0.708159] pci 0000:00:08.0: reg 0x14: [io 0x5078-0x507b]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]283[ 0.708162] pci 0000:00:08.0: reg 0x18: [io 0x5068-0x506f]
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]284[ 0.708166] pci 0000:00:08.0: reg 0x1c: [io 0x507c-0x507f]
285[ 0.708169] pci 0000:00:08.0: reg 0x20: [io 0x5040-0x504f]
286[ 0.708173] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]287[ 0.708236] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
288[ 0.708278] pci 0000:00:09.0: System wakeup disabled by ACPI
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]289[ 0.712041] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
290[ 0.712062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.712093] pci 0000:00:0b.0: System wakeup disabled by ACPI
292[ 0.716042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
293[ 0.716061] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
294[ 0.716092] pci 0000:00:0c.0: System wakeup disabled by ACPI
295[ 0.720041] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
296[ 0.720060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
297[ 0.720091] pci 0000:00:0d.0: System wakeup disabled by ACPI
298[ 0.724041] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
299[ 0.724060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
300[ 0.724092] pci 0000:00:0e.0: System wakeup disabled by ACPI
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]301[ 0.728047] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]302[ 0.728113] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
303[ 0.728174] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
304[ 0.728235] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
305[ 0.728299] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
306[ 0.728366] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
307[ 0.728426] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
308[ 0.728487] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
309[ 0.728585] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
310[ 0.728594] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
311[ 0.728600] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff]
312[ 0.728605] pci 0000:01:04.0: reg 0x18: [io 0x3000-0x307f]
313[ 0.728635] pci 0000:01:04.0: supports D1 D2
314[ 0.728687] pci 0000:00:09.0: PCI bridge to [bus 01]
315[ 0.732002] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
316[ 0.732005] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
317[ 0.732007] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
318[ 0.732057] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
319[ 0.732069] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit]
320[ 0.732092] pci 0000:02:00.0: reg 0x30: [mem 0x0d080000-0x0d08ffff pref]
321[ 0.732132] pci 0000:02:00.0: PME# supported from D3hot D3cold
322[ 0.732184] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
323[ 0.736007] pci 0000:00:0b.0: PCI bridge to [bus 02]
324[ 0.740003] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff]
325[ 0.740053] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
326[ 0.740065] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit]
327[ 0.740126] pci 0000:03:00.0: PME# supported from D3hot D3cold
328[ 0.740177] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
329[ 0.744005] pci 0000:00:0c.0: PCI bridge to [bus 03]
330[ 0.748003] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff]
331[ 0.748041] pci 0000:00:0d.0: PCI bridge to [bus 04]
332[ 0.752046] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]333[ 0.752087] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
334[ 0.752133] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]335[ 0.756005] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
336[ 0.760002] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff]
337[ 0.760004] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff]
338[ 0.760049] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]339[ 0.760098] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
340[ 0.760145] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]341[ 0.764008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]342[ 0.768001] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
343[ 0.768048] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]344[ 0.772020] pci 0000:05:00.0: PCI bridge to [bus 06-08]
345[ 0.776005] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff]
346[ 0.776009] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff]
347[ 0.776069] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000
348[ 0.776081] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]349[ 0.776091] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff]
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]350[ 0.776100] pci 0000:07:00.0: reg 0x18: [io 0x1000-0x101f]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]351[ 0.776132] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref]
352[ 0.776174] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]353[ 0.776234] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000
354[ 0.776246] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]355[ 0.776256] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff]
356[ 0.776265] pci 0000:07:00.1: reg 0x18: [io 0x1020-0x103f]
357[ 0.776297] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref]
358[ 0.776339] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
359[ 0.776392] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]360[ 0.780009] pci 0000:06:00.0: PCI bridge to [bus 07]
361[ 0.784005] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff]
362[ 0.784009] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff]
363[ 0.784071] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000
364[ 0.784083] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]365[ 0.784093] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff]
366[ 0.784102] pci 0000:08:00.0: reg 0x18: [io 0x2000-0x201f]
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]367[ 0.784133] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]368[ 0.784175] pci 0000:08:00.0: PME# supported from D0 D3hot
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]369[ 0.784236] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000
370[ 0.784248] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff]
371[ 0.784257] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff]
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]372[ 0.784267] pci 0000:08:00.1: reg 0x18: [io 0x2020-0x203f]
373[ 0.784298] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref]
374[ 0.784340] pci 0000:08:00.1: PME# supported from D0 D3hot
375[ 0.784394] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]376[ 0.788009] pci 0000:06:01.0: PCI bridge to [bus 08]
377[ 0.792005] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff]
378[ 0.792009] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff]
379[ 0.792044] pci_bus 0000:00: on NUMA node 0
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]380[ 0.792101] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]381[ 0.800051] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
382[ 0.805546] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
383[ 0.813217] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]384[ 0.820243] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
385[ 0.826708] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
386[ 0.830709] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
387[ 0.836987] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]388[ 0.841546] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]389[ 0.850432] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
390[ 0.857600] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]391[ 0.864243] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
392[ 0.869541] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]393[ 0.876911] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
394[ 0.884245] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
395[ 0.890707] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
396[ 0.894708] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
397[ 0.903176] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
398[ 0.909599] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
399[ 0.916007] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
400[ 0.921876] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
401[ 0.928400] ACPI: Enabled 1 GPEs in block 00 to 1F
402[ 0.932090] vgaarb: setting as boot device: PCI:0000:01:04.0
403[ 0.936000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
404[ 0.944008] vgaarb: loaded
405[ 0.948001] vgaarb: bridge control possible 0000:01:04.0
406[ 0.952117] PCI: Using ACPI for IRQ routing
407[ 0.960004] PCI: pci_cache_line_size set to 64 bytes
408[ 0.960052] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
409[ 0.960054] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
410[ 0.960244] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
411[ 0.964005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
412[ 0.972191] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
413[ 0.980042] Switched to clocksource hpet
414[ 0.992761] pnp: PnP ACPI init
415[ 0.995849] ACPI: bus type PNP registered
416[ 1.000256] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
417[ 1.000307] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
418[ 1.000361] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
419[ 1.000413] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
420[ 1.000441] pnp 00:04: [dma 2]
421[ 1.000466] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
422[ 1.000481] pnp: PnP ACPI: found 5 devices
423[ 1.004576] ACPI: bus type PNP unregistered
424[ 1.015976] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d080000-0x0d08ffff pref]: no compatible bridge window
425[ 1.025938] pci 0000:00:09.0: PCI bridge to [bus 01]
426[ 1.030898] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
427[ 1.036991] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
428[ 1.043775] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
429[ 1.051000] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref]
430[ 1.058216] pci 0000:00:0b.0: PCI bridge to [bus 02]
431[ 1.063180] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff]
432[ 1.069967] pci 0000:00:0c.0: PCI bridge to [bus 03]
433[ 1.074932] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff]
434[ 1.081721] pci 0000:00:0d.0: PCI bridge to [bus 04]
435[ 1.086687] pci 0000:06:00.0: PCI bridge to [bus 07]
436[ 1.091649] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff]
437[ 1.097736] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff]
438[ 1.104526] pci 0000:06:01.0: PCI bridge to [bus 08]
439[ 1.109487] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff]
440[ 1.115582] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff]
441[ 1.122372] pci 0000:05:00.0: PCI bridge to [bus 06-08]
442[ 1.127591] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff]
443[ 1.133686] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff]
444[ 1.140476] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
445[ 1.145695] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff]
446[ 1.151787] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff]
447[ 1.158568] pci_bus 0000:00: resource 4 [io 0x0d00-0x5fff]
448[ 1.158570] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
449[ 1.158572] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff]
450[ 1.158574] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
451[ 1.158576] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
452[ 1.158578] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
453[ 1.158580] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff]
454[ 1.158582] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
455[ 1.158584] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff]
456[ 1.158587] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff]
457[ 1.158589] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
458[ 1.158591] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff]
459[ 1.158593] pci_bus 0000:06: resource 0 [io 0x1000-0x2fff]
460[ 1.158595] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff]
461[ 1.158597] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
462[ 1.158599] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff]
463[ 1.158601] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
464[ 1.158603] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
465[ 1.158677] NET: Registered protocol family 2
466[ 1.163351] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
467[ 1.170774] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
468[ 1.177689] TCP: Hash tables configured (established 32768 bind 32768)
469[ 1.184301] TCP: reno registered
470[ 1.187534] UDP hash table entries: 2048 (order: 4, 65536 bytes)
471[ 1.193588] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
472[ 1.200198] NET: Registered protocol family 1
473[ 1.204840] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
474[ 1.210813] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
475[ 1.216653] pci 0000:00:00.0: Found enabled HT MSI Mapping
476[ 1.222160] pci 0000:00:00.0: Found enabled HT MSI Mapping
477[ 1.227642] pci 0000:00:0b.0: Found disabled HT MSI Mapping
478[ 1.233215] pci 0000:00:00.0: Found enabled HT MSI Mapping
479[ 1.238724] pci 0000:00:00.0: Found enabled HT MSI Mapping
480[ 1.244212] pci 0000:00:0c.0: Found disabled HT MSI Mapping
481[ 1.249785] pci 0000:00:00.0: Found enabled HT MSI Mapping
482[ 1.255298] pci 0000:00:00.0: Found enabled HT MSI Mapping
483[ 1.260783] pci 0000:00:0d.0: Found disabled HT MSI Mapping
484[ 1.266357] pci 0000:00:00.0: Found enabled HT MSI Mapping
485[ 1.271871] pci 0000:00:00.0: Found enabled HT MSI Mapping
486[ 1.277353] pci 0000:00:0e.0: Found disabled HT MSI Mapping
487[ 1.282928] pci 0000:00:00.0: Found enabled HT MSI Mapping
488[ 1.288427] pci 0000:01:04.0: Video device with shadowed ROM
489[ 1.288452] PCI: CLS 64 bytes, default 64
490[ 1.288532] Unpacking initramfs...
491[ 1.455839] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
492[ 1.463490] PCI-DMA: Disabling AGP.
493[ 1.467130] PCI-DMA: aperture base @ b4000000 size 65536 KB
494[ 1.472700] PCI-DMA: using GART IOMMU.
495[ 1.476452] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
496[ 1.486631] platform rtc_cmos: registered platform RTC device (no PNP device found)
497[ 1.494445] microcode: AMD CPU family 0xf not supported
498[ 1.500060] futex hash table entries: 1024 (order: 4, 65536 bytes)
499[ 1.506299] audit: initializing netlink subsys (disabled)
500[ 1.511736] audit: type=2000 audit(1451347470.508:1): initialized
501[ 1.518261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
502[ 1.524641] zbud: loaded
503[ 1.527371] VFS: Disk quotas dquot_6.5.2
504[ 1.531317] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
505[ 1.537825] msgmni has been set to 7926
506[ 1.542093] alg: No test for stdrng (krng)
507[ 1.546239] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
508[ 1.553702] io scheduler noop registered
509[ 1.557625] io scheduler deadline registered
510[ 1.561943] io scheduler cfq registered (default)
511[ 1.566946] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
512[ 1.572533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
513[ 1.579228] GHES: HEST is not enabled!
514[ 1.583064] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
515[ 1.609596] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
516[ 1.637206] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
517[ 1.644928] Linux agpgart interface v0.103
518[ 1.649138] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
519[ 1.659292] serio: i8042 KBD port at 0x60,0x64 irq 1
520[ 1.664265] serio: i8042 AUX port at 0x60,0x64 irq 12
521[ 1.669543] mousedev: PS/2 mouse device common for all mice
522[ 1.675204] rtc_cmos rtc_cmos: RTC can wake from S4
523[ 1.680235] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
524[ 1.686609] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
525[ 1.694451] ledtrig-cpu: registered to indicate activity on CPUs
526[ 1.700542] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
527[ 1.706978] AMD IOMMUv2 functionality not available on this system
528[ 1.713260] TCP: cubic registered
529[ 1.716651] NET: Registered protocol family 10
530[ 1.721395] mip6: Mobile IPv6
531[ 1.724375] NET: Registered protocol family 17
532[ 1.728819] mpls_gso: MPLS GSO support
533[ 1.732979] registered taskstats version 1
534[ 1.737671] rtc_cmos rtc_cmos: setting system clock to 2015-12-29 00:04:32 UTC (1451347472)
535[ 1.746083] PM: Hibernation image not present or could not be loaded.
536[ 1.747352] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
537[ 1.755211] Write protecting the kernel read-only data: 8192k
538[ 1.763363] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
539[ 1.771648] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
540[ 1.787988] systemd-udevd[72]: starting version 215
541[ 1.793271] random: systemd-udevd urandom read with 3 bits of entropy available
542[ 1.810163] pps_core: LinuxPPS API ver. 1 registered
543[ 1.815138] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
544[ 1.824642] PTP clock support registered
545[ 1.830350] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
546[ 1.836215] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
547[ 1.842367] ACPI: bus type USB registered
548[ 1.842378] tg3.c:v3.137 (May 11, 2014)
549[ 1.842397] tg3 0000:02:00.0: enabling device (0004 -> 0006)
550[ 1.842604] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19
551[ 1.842737] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
552[ 1.842744] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
553[ 1.842780] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X
554[ 1.877087] usbcore: registered new interface driver usbfs
555[ 1.882602] usbcore: registered new interface driver hub
556[ 1.887975] usbcore: registered new device driver usb
557[ 1.893723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
558[ 1.900624] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
559[ 1.900636] ehci-pci: EHCI PCI platform driver
560[ 1.900758] ehci-pci 0000:00:02.1: EHCI Host Controller
561[ 1.900765] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
562[ 1.900779] ehci-pci 0000:00:02.1: debug port 1
563[ 1.900825] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
564[ 1.900848] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000
565[ 1.902594] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3
566[ 1.902596] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
567[ 1.902598] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
568[ 1.902599] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
569[ 1.902674] tg3 0000:03:00.0: enabling device (0004 -> 0006)
570[ 1.902840] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
571[ 1.920019] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
572[ 1.920154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
573[ 1.920155] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
574[ 1.920156] usb usb1: Product: EHCI Host Controller
575[ 1.920158] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
576[ 1.920159] usb usb1: SerialNumber: 0000:00:02.1
577[ 1.920311] hub 1-0:1.0: USB hub found
578[ 1.920321] hub 1-0:1.0: 10 ports detected
579[ 2.016613] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9
580[ 2.016615] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection
581[ 2.016688] e1000e 0000:07:00.0 eth1: MAC: 0, PHY: 4, PBA No: D72468-003
582[ 2.016836] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18
583[ 2.016936] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
584[ 2.016962] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X
585[ 2.059745] ohci-pci: OHCI PCI platform driver
586[ 2.064336] ohci-pci 0000:00:02.0: OHCI PCI host controller
587[ 2.069915] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
588[ 2.077331] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000
589[ 2.111121] tg3 0000:03:00.0 eth2: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9
590[ 2.121375] tg3 0000:03:00.0 eth2: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
591[ 2.131105] tg3 0000:03:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
592[ 2.138064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
593[ 2.138065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
594[ 2.138066] usb usb2: Product: OHCI PCI host controller
595[ 2.138067] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
596[ 2.138068] usb usb2: SerialNumber: 0000:00:02.0
597[ 2.138271] hub 2-0:1.0: USB hub found
598[ 2.138282] hub 2-0:1.0: 10 ports detected
599[ 2.176672] tg3 0000:03:00.0 eth2: dma_rwctrl[76180000] dma_mask[64-bit]
600[ 2.188854] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8
601[ 2.196768] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection
602[ 2.203728] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003
603[ 2.210603] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
604[ 2.219929] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X
605[ 2.396727] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb
606[ 2.404634] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection
607[ 2.411583] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003
608[ 2.418369] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
609[ 2.427685] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X
610[ 2.600723] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca
611[ 2.608631] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection
612[ 2.615580] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003
613[ 2.625851] FS-Cache: Loaded
614[ 2.631739] RPC: Registered named UNIX socket transport module.
615[ 2.638204] RPC: Registered udp transport module.
616[ 2.644292] RPC: Registered tcp transport module.
617[ 2.650360] RPC: Registered tcp NFSv4.1 backchannel transport module.
618[ 2.660959] FS-Cache: Netfs 'nfs' registered for caching
619[ 2.672663] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
620[ 2.720084] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
621[ 4.296348] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
622[ 4.299584] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
623[ 4.299584] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
624[ 6.154945] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
625[ 6.168437] systemd[1]: Detected architecture 'x86-64'.
626[ 7.217796] systemd[1]: Inserted module 'autofs4'
627[ 7.259416] systemd[1]: Set hostname to <cb-test-tgt>.
628[ 7.926963] random: nonblocking pool is initialized
629[ 11.844511] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
630[ 11.857252] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
631[ 11.872512] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
632[ 11.880238] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
633[ 11.887817] systemd[1]: Expecting device dev-ttyS0.device...
634[ 11.904068] systemd[1]: Starting Remote File Systems (Pre).
635[ 11.920105] systemd[1]: Reached target Remote File Systems (Pre).
636[ 11.926285] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
637[ 11.948053] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
638[ 11.957471] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
639[ 11.965502] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
640[ 11.973424] systemd[1]: Starting Paths.
641[ 11.988055] systemd[1]: Reached target Paths.
642[ 11.992437] systemd[1]: Starting Encrypted Volumes.
643[ 12.008058] systemd[1]: Reached target Encrypted Volumes.
644[ 12.013469] systemd[1]: Starting Swap.
645[ 12.028041] systemd[1]: Reached target Swap.
646[ 12.032325] systemd[1]: Starting Root Slice.
647[ 12.044046] systemd[1]: Created slice Root Slice.
648[ 12.048764] systemd[1]: Starting User and Session Slice.
649[ 12.064055] systemd[1]: Created slice User and Session Slice.
650[ 12.069816] systemd[1]: Starting Delayed Shutdown Socket.
651[ 12.084055] systemd[1]: Listening on Delayed Shutdown Socket.
652[ 12.089816] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
653[ 12.120043] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
654[ 12.127019] systemd[1]: Starting Journal Socket (/dev/log).
655[ 12.156043] systemd[1]: Listening on Journal Socket (/dev/log).
656[ 12.161978] systemd[1]: Starting udev Kernel Socket.
657[ 12.176042] systemd[1]: Listening on udev Kernel Socket.
658[ 12.181371] systemd[1]: Starting udev Control Socket.
659[ 12.196043] systemd[1]: Listening on udev Control Socket.
660[ 12.201459] systemd[1]: Starting Journal Socket.
661[ 12.216042] systemd[1]: Listening on Journal Socket.
662[ 12.221029] systemd[1]: Starting System Slice.
663[ 12.236045] systemd[1]: Created slice System Slice.
664[ 12.240931] systemd[1]: Starting system-getty.slice.
665[ 12.256055] systemd[1]: Created slice system-getty.slice.
666[ 12.261469] systemd[1]: Starting system-serial\x2dgetty.slice.
667[ 12.276056] systemd[1]: Created slice system-serial\x2dgetty.slice.
668[ 12.282354] systemd[1]: Starting Increase datagram queue length...
669[ 12.300668] systemd[1]: Mounting Huge Pages File System...
670[ 12.316490] systemd[1]: Starting udev Coldplug all Devices...
671[ 12.508115] systemd[1]: Starting Load Kernel Modules...
672[ 12.524816] systemd[1]: Mounting POSIX Message Queue File System...
673[ 12.665729] systemd[1]: Started Set Up Additional Binary Formats.
674[ 12.671963] systemd[1]: Mounting Debug File System...
675[ 12.937708] systemd[1]: Starting Create list of required static device nodes for the current kernel...
676[ 12.960573] systemd[1]: Starting Slices.
677[ 12.972048] systemd[1]: Reached target Slices.
678[ 12.976527] systemd[1]: Starting Remount Root and Kernel File Systems...
679[ 13.004069] systemd[1]: Mounted POSIX Message Queue File System.
680[ 13.020083] systemd[1]: Mounted Huge Pages File System.
681[ 13.036055] systemd[1]: Started Increase datagram queue length.
682[ 13.048387] systemd[1]: Starting Syslog Socket.
683[ 13.060066] systemd[1]: Listening on Syslog Socket.
684[ 13.064971] systemd[1]: Starting Sockets.
685[ 13.076076] systemd[1]: Reached target Sockets.
686[ 13.080634] systemd[1]: Starting Journal Service...
687[ 13.104061] systemd[1]: Started Journal Service.
688[ 13.744044] systemd-udevd[153]: starting version 215
689[ 14.111232] systemd-journald[140]: Received request to flush runtime journal from PID 1
690[ 14.552550] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
691[ 14.561061] ACPI: Power Button [PWRB]
692[ 14.564972] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
693[ 14.565025] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
694[ 14.579065] ACPI: Power Button [PWRF]
695[ 14.611905] FDC 0 is a post-1991 82077
696[ 14.626044] SCSI subsystem initialized
697[ 14.700265] systemd-udevd[175]: renamed network interface eth1 to eth6
698[ 14.712418] libata version 3.00 loaded.
699[ 14.712555] i2c i2c-0: nForce2 SMBus adapter at 0x4c80
700[ 14.718690] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0
701[ 14.729159] sata_nv 0000:00:07.0: version 3.5
702[ 14.729394] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
703[ 14.735988] scsi0 : sata_nv
704[ 14.738947] scsi1 : sata_nv
705[ 14.742244] ata1: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21
706[ 14.742301] EDAC MC: Ver: 3.0.0
707[ 14.752523] ata2: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21
708[ 14.760244] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
709[ 14.766374] MCE: In-kernel MCE decoding enabled.
710[ 14.766428] input: PC Speaker as /devices/platform/pcspkr/input/input4
711[ 14.767128] scsi2 : sata_nv
712[ 14.767210] scsi3 : sata_nv
713[ 14.767252] ata3: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20
714[ 14.767255] ata4: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20
715[ 14.797399] pata_amd 0000:00:06.0: version 0.4.1
716[ 14.798323] scsi4 : pata_amd
717[ 14.801740] scsi5 : pata_amd
718[ 14.804732] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14
719[ 14.811699] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15
720[ 14.818873] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
721[ 14.827132] AMD64 EDAC driver v3.4.0
722[ 14.827147] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
723[ 14.838932] EDAC amd64: DRAM ECC enabled.
724[ 14.842955] EDAC amd64: K8 revF or later detected (node 0).
725[ 14.848557] EDAC MC: DCT0 chip selects:
726[ 14.848559] EDAC amd64: MC: 0: 0MB 1: 0MB
727[ 14.853272] EDAC amd64: MC: 2: 0MB 3: 0MB
728[ 14.857976] EDAC amd64: MC: 4: 1024MB 5: 1024MB
729[ 14.862682] EDAC amd64: MC: 6: 1024MB 7: 1024MB
730[ 14.867442] EDAC amd64: CS4: Registered DDR2 RAM
731[ 14.872074] EDAC amd64: CS5: Registered DDR2 RAM
732[ 14.876696] EDAC amd64: CS6: Registered DDR2 RAM
733[ 14.881328] EDAC amd64: CS7: Registered DDR2 RAM
734[ 14.886352] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
735[ 14.896024] EDAC amd64: DRAM ECC disabled.
736[ 14.900137] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Raptor Engineering Automated Coreboot Test Standf5a6b982015-12-28 12:46:50 +0000[diff] [blame]737 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
738 (Note that use of the override may cause unknown side effects.)
Raptor Engineering Automated Coreboot Test Stand6f0fc182015-12-29 00:06:24 +0000[diff] [blame]739[ 14.924574] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
740[ 14.937350] kvm: Nested Virtualization enabled
741[ 14.948535] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
742[ 14.953603] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
743[ 14.958656] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
744[ 14.963709] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
745[ 14.968853] powernow_k8: fid 0xe (2200 MHz), vid 0x12
746[ 14.973903] powernow_k8: fid 0xc (2000 MHz), vid 0x12
747[ 14.978954] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
748[ 14.984364] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
749[ 14.989417] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
750[ 14.994468] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
751[ 14.999522] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
752[ 15.004659] powernow_k8: fid 0xe (2200 MHz), vid 0x12
753[ 15.009713] powernow_k8: fid 0xc (2000 MHz), vid 0x12
754[ 15.014763] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
755[ 15.019859] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00)
756[ 15.076025] ata1: SATA link down (SStatus 0 SControl 300)
757[ 15.076044] ata3: SATA link down (SStatus 0 SControl 300)
758[ 15.396041] ata2: SATA link down (SStatus 0 SControl 300)
759[ 15.712060] ata4: SATA link down (SStatus 0 SControl 300)
760[ 15.854671] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
761[ 46.215277] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****