Gitiles
Code Review Sign In
review.coreboot.org / board-status / e1474243e7ac3464886d58d58e75f2bcee800694 / . / asus / f2a85-m / 4.0-5901-g60ec2ff / 2014-05-05T06:59:05Z / kernel_log.txt
blob: afd6a1ab3bdbaafa68878ede76cae17418b80513 [file] [log] [blame]
Rudolf Marek7b043492014-05-05 22:46:43 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
4[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
5[ 0.000000] KERNEL supported cpus:
6[ 0.000000] Intel GenuineIntel
7[ 0.000000] AMD AuthenticAMD
8[ 0.000000] Centaur CentaurHauls
9[ 0.000000] e820: BIOS-provided physical RAM map:
10[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf12ffff] usable
14[ 0.000000] BIOS-e820: [mem 0x00000000bf130000-0x00000000dfffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
17[ 0.000000] NX (Execute Disable) protection: active
18[ 0.000000] DMI present.
19[ 0.000000] DMI: ASUS F2A85-M/F2A85-M, BIOS 4.0-5901-g60ec2ff 05/05/2014
20[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
21[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
22[ 0.000000] No AGP bridge found
23[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
24[ 0.000000] MTRR default type: uncachable
25[ 0.000000] MTRR fixed ranges enabled:
26[ 0.000000] 00000-9FFFF write-back
27[ 0.000000] A0000-BFFFF uncachable
28[ 0.000000] C0000-FFFFF write-back
29[ 0.000000] MTRR variable ranges enabled:
30[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
31[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
32[ 0.000000] 2 disabled
33[ 0.000000] 3 disabled
34[ 0.000000] 4 disabled
35[ 0.000000] 5 disabled
36[ 0.000000] 6 base 0000FF800000 mask FFFFFF800000 write-protect
37[ 0.000000] 7 disabled
38[ 0.000000] TOM2: 000000021f000000 aka 8688M
39[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
40[ 0.000000] e820: last_pfn = 0xbf130 max_arch_pfn = 0x400000000
41[ 0.000000] found SMP MP-table at [mem 0x000fd9a0-0x000fd9af] mapped at [ffff8800000fd9a0]
42[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
43[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
44[ 0.000000] Using GB pages for direct mapping
45[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbf12ffff]
46[ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
47[ 0.000000] [mem 0x80000000-0xbeffffff] page 2M
48[ 0.000000] [mem 0xbf000000-0xbf12ffff] page 4k
49[ 0.000000] kernel direct mapping tables up to 0xbf12ffff @ [mem 0x1fffd000-0x1fffffff]
50[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21effffff]
51[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
52[ 0.000000] [mem 0x200000000-0x21effffff] page 2M
53[ 0.000000] kernel direct mapping tables up to 0x21effffff @ [mem 0xbf12e000-0xbf12ffff]
54[ 0.000000] RAMDISK: [mem 0x362e2000-0x37168fff]
55[ 0.000000] ACPI: RSDP 00000000000fd980 00014 (v00 CORE )
56[ 0.000000] ACPI: RSDT 00000000bf132424 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: FACP 00000000bf133d88 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: DSDT 00000000bf1324c8 0187C (v02 ASUS COREBOOT 00010001 INTL 20130626)
59[ 0.000000] ACPI: FACS 00000000bf133d48 00040
60[ 0.000000] ACPI: HPET 00000000bf133e80 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 00000000bf133eb8 00072 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HEST 00000000bf133f30 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: SSDT 00000000bf134100 0051F (v02 AMD ALIB 00000001 MSFT 04000000)
64[ 0.000000] ACPI: SSDT 00000000bf134620 00D40 (v01 AMD POWERNOW 00000001 AMD 00000001)
65[ 0.000000] ACPI: SSDT 00000000bf135360 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
66[ 0.000000] ACPI: Local APIC address 0xfee00000
67[ 0.000000] No NUMA configuration found
68[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
69[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
70[ 0.000000] NODE_DATA [mem 0x21effc000-0x21effffff]
71[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216e00000-ffff88021e5fffff] on node 0
72[ 0.000000] Zone ranges:
73[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
74[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
75[ 0.000000] Normal [mem 0x100000000-0x21effffff]
76[ 0.000000] Movable zone start for each node
77[ 0.000000] Early memory node ranges
78[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
79[ 0.000000] node 0: [mem 0x00100000-0xbf12ffff]
80[ 0.000000] node 0: [mem 0x100000000-0x21effffff]
81[ 0.000000] On node 0 totalpages: 1958079
82[ 0.000000] DMA zone: 64 pages used for memmap
83[ 0.000000] DMA zone: 6 pages reserved
84[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
85[ 0.000000] DMA32 zone: 16320 pages used for memmap
86[ 0.000000] DMA32 zone: 762224 pages, LIFO batch:31
87[ 0.000000] Normal zone: 18368 pages used for memmap
88[ 0.000000] Normal zone: 1157184 pages, LIFO batch:31
89[ 0.000000] ACPI: PM-Timer IO Port: 0x818
90[ 0.000000] ACPI: Local APIC address 0xfee00000
91[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
92[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
93[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
94[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
95[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
96[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
97[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
98[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
99[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
100[ 0.000000] ACPI: IRQ0 used by override.
101[ 0.000000] ACPI: IRQ2 used by override.
102[ 0.000000] ACPI: IRQ9 used by override.
103[ 0.000000] Using ACPI (MADT) for SMP configuration information
104[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
105[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
106[ 0.000000] nr_irqs_gsi: 40
107[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
108[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
109[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
110[ 0.000000] PM: Registered nosave memory: 00000000bf130000 - 00000000e0000000
111[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
112[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
113[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
114[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
115[ 0.000000] Booting paravirtualized kernel on bare hardware
116[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
117[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s83584 r8192 d22912 u524288
118[ 0.000000] pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
119[ 0.000000] pcpu-alloc: [0] 0 1 2 3
120[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1923321
121[ 0.000000] Policy zone: Normal
122[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
123[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
124[ 0.000000] __ex_table already sorted, skipping sort
125[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
126[ 0.000000] Checking aperture...
127[ 0.000000] No AGP bridge found
128[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
129[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
130[ 0.000000] Memory: 7612212k/8896512k available (6711k kernel code, 1064196k absent, 220104k reserved, 6459k data, 928k init)
131[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
132[ 0.000000] Hierarchical RCU implementation.
133[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
134[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
135[ 0.000000] spurious 8259A interrupt: IRQ7.
136[ 0.000000] Console: colour VGA+ 80x25
137[ 0.000000] console [ttyS0] enabled
138[ 0.000000] allocated 31457280 bytes of page_cgroup
139[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
140[ 0.000000] hpet clockevent registered
141[ 0.000000] Fast TSC calibration using PIT
142[ 0.004000] Detected 3793.213 MHz processor.
143[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7586.42 BogoMIPS (lpj=15172852)
144[ 0.010669] pid_max: default: 32768 minimum: 301
145[ 0.015286] Security Framework initialized
146[ 0.019379] AppArmor: AppArmor initialized
147[ 0.023462] Yama: becoming mindful.
148[ 0.027432] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
149[ 0.036709] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
150[ 0.044712] Mount-cache hash table entries: 256
151[ 0.049386] Initializing cgroup subsys cpuacct
152[ 0.053822] Initializing cgroup subsys memory
153[ 0.058169] Initializing cgroup subsys devices
154[ 0.062600] Initializing cgroup subsys freezer
155[ 0.067029] Initializing cgroup subsys blkio
156[ 0.071288] Initializing cgroup subsys perf_event
157[ 0.075996] tseg: 0000000000
158[ 0.076006] CPU: Physical Processor ID: 0
159[ 0.080000] CPU: Processor Core ID: 0
160[ 0.083654] mce: CPU supports 7 MCE banks
161[ 0.088985] ACPI: Core revision 20120320
162[ 0.093894] ftrace: allocating 25118 entries in 99 pages
163[ 0.107003] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
164[ 0.152362] CPU0: AMD A10-5800K APU with Radeon(tm) HD Graphics stepping 01
165[ 0.265924] Performance Events: AMD Family 15h PMU driver.
166[ 0.271401] ... version: 0
167[ 0.275390] ... bit width: 48
168[ 0.279466] ... generic registers: 6
169[ 0.283454] ... value mask: 0000ffffffffffff
170[ 0.288741] ... max period: 00007fffffffffff
171[ 0.294024] ... fixed-purpose events: 0
172[ 0.298016] ... event mask: 000000000000003f
173[ 0.303413] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
174[ 0.311452] Booting Node 0, Processors #1 #2 #3 Ok.
175[ 0.355730] Brought up 4 CPUs
176[ 0.358690] Total of 4 processors activated (30345.70 BogoMIPS).
177[ 0.365467] devtmpfs: initialized
178[ 0.369985] EVM: security.selinux
179[ 0.373283] EVM: security.SMACK64
180[ 0.376584] EVM: security.capability
181[ 0.380880] dummy:
182[ 0.382995] RTC time: 20:40:38, date: 05/05/14
183[ 0.387448] NET: Registered protocol family 16
184[ 0.392053] Trying to unpack rootfs image as initramfs...
185[ 0.397472] ACPI: bus type pci registered
186[ 0.401501] PCI: Using configuration type 1 for base access
187[ 0.407050] PCI: Using configuration type 1 for extended access
188[ 0.413869] bio: create slab <bio-0> at 0
189[ 0.417942] ACPI: Added _OSI(Module Device)
190[ 0.422112] ACPI: Added _OSI(Processor Device)
191[ 0.426541] ACPI: Added _OSI(3.0 _SCP Extensions)
192[ 0.431224] ACPI: Added _OSI(Processor Aggregator Device)
193[ 0.437048] ACPI: EC: Look up EC in DSDT
194[ 0.437540] ACPI: Executed 1 blocks of module-level executable AML code
195[ 0.446371] ACPI: Interpreter enabled
196[ 0.450022] ACPI: (supports S0 S1 S2 S3 S4 S5)
197[ 0.454573] ACPI: BIOS offers _BFS
198[ 0.457956] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
199[ 0.466265] ACPI: Using IOAPIC for interrupt routing
200[ 0.472862] ACPI: No dock devices found.
201[ 0.476769] HEST: Table parsing has been initialized.
202[ 0.481803] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
203[ 0.490963] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
204[ 0.497180] pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7]
205[ 0.503851] pci_root PNP0A03:00: >host bridge window [io 0x03b0-0x03df]
206[ 0.510526] pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff]
207[ 0.517199] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
208[ 0.524557] pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
209[ 0.531916] pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xffffffff]
210[ 0.539282] pci_root PNP0A03:00: >host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
211[ 0.549511] PCI host bridge to bus 0000:00
212[ 0.553592] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
213[ 0.559834] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
214[ 0.566070] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
215[ 0.573005] pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
216[ 0.579940] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xffffffff]
217[ 0.586879] pci 0000:00:00.0: >[1022:1410] type 00 class 0x060000
218[ 0.586915] pci 0000:00:01.0: >[1002:9901] type 00 class 0x030000
219[ 0.586922] pci 0000:00:01.0: >reg 10: [mem 0xe0000000-0xefffffff pref]
220[ 0.586927] pci 0000:00:01.0: >reg 14: [io 0x3000-0x30ff]
221[ 0.586931] pci 0000:00:01.0: >reg 18: [mem 0xf0200000-0xf023ffff]
222[ 0.586965] pci 0000:00:01.0: >supports D1 D2
223[ 0.586981] pci 0000:00:01.1: >[1002:9902] type 00 class 0x040300
224[ 0.586987] pci 0000:00:01.1: >reg 10: [mem 0xf0240000-0xf0243fff]
225[ 0.587024] pci 0000:00:01.1: >supports D1 D2
226[ 0.587064] pci 0000:00:10.0: >[1022:7812] type 00 class 0x0c0330
227[ 0.587068] Freeing initrd memory: 14876k freed
228[ 0.591596] pci 0000:00:10.0: >reg 10: [mem 0xf0248000-0xf0249fff 64bit]
229[ 0.591684] pci 0000:00:10.0: >PME# supported from D0 D3hot D3cold
230[ 0.591719] pci 0000:00:10.1: >[1022:7812] type 00 class 0x0c0330
231[ 0.591736] pci 0000:00:10.1: >reg 10: [mem 0xf024a000-0xf024bfff 64bit]
232[ 0.591823] pci 0000:00:10.1: >PME# supported from D0 D3hot D3cold
233[ 0.591854] pci 0000:00:11.0: >[1022:7801] type 00 class 0x010601
234[ 0.591867] pci 0000:00:11.0: >reg 10: [io 0x3410-0x3417]
235[ 0.591875] pci 0000:00:11.0: >reg 14: [io 0x3420-0x3423]
236[ 0.591882] pci 0000:00:11.0: >reg 18: [io 0x3418-0x341f]
237[ 0.591890] pci 0000:00:11.0: >reg 1c: [io 0x3424-0x3427]
238[ 0.591897] pci 0000:00:11.0: >reg 20: [io 0x3400-0x340f]
239[ 0.591904] pci 0000:00:11.0: >reg 24: [mem 0xf024f000-0xf024f7ff]
240[ 0.591941] pci 0000:00:12.0: >[1022:7807] type 00 class 0x0c0310
241[ 0.591952] pci 0000:00:12.0: >reg 10: [mem 0xf024c000-0xf024cfff]
242[ 0.592008] pci 0000:00:12.2: >[1022:7808] type 00 class 0x0c0320
243[ 0.592023] pci 0000:00:12.2: >reg 10: [mem 0xf024f800-0xf024f8ff]
244[ 0.592089] pci 0000:00:12.2: >supports D1 D2
245[ 0.592090] pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
246[ 0.592109] pci 0000:00:13.0: >[1022:7807] type 00 class 0x0c0310
247[ 0.592119] pci 0000:00:13.0: >reg 10: [mem 0xf024d000-0xf024dfff]
248[ 0.592177] pci 0000:00:13.2: >[1022:7808] type 00 class 0x0c0320
249[ 0.592192] pci 0000:00:13.2: >reg 10: [mem 0xf024f900-0xf024f9ff]
250[ 0.592257] pci 0000:00:13.2: >supports D1 D2
251[ 0.592259] pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
252[ 0.592277] pci 0000:00:14.0: >[1022:780b] type 00 class 0x0c0500
253[ 0.592338] pci 0000:00:14.2: >[1022:780d] type 00 class 0x040300
254[ 0.592354] pci 0000:00:14.2: >reg 10: [mem 0xf0244000-0xf0247fff 64bit]
255[ 0.592407] pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
256[ 0.592418] pci 0000:00:14.3: >[1022:780e] type 00 class 0x060100
257[ 0.592479] pci 0000:00:14.4: >[1022:780f] type 01 class 0x060401
258[ 0.592512] pci 0000:00:14.5: >[1022:7809] type 00 class 0x0c0310
259[ 0.592522] pci 0000:00:14.5: >reg 10: [mem 0xf024e000-0xf024efff]
260[ 0.592574] pci 0000:00:14.7: >[1022:7806] type 00 class 0x080501
261[ 0.592588] pci 0000:00:14.7: >reg 10: [mem 0xf024fa00-0xf024faff 64bit]
262[ 0.592637] pci 0000:00:15.0: >[1022:43a0] type 01 class 0x060400
263[ 0.592696] pci 0000:00:15.0: >supports D1 D2
264[ 0.592717] pci 0000:00:15.1: >[1022:43a1] type 01 class 0x060400
265[ 0.592776] pci 0000:00:15.1: >supports D1 D2
266[ 0.592798] pci 0000:00:18.0: >[1022:1400] type 00 class 0x060000
267[ 0.592813] pci 0000:00:18.1: >[1022:1401] type 00 class 0x060000
268[ 0.592827] pci 0000:00:18.2: >[1022:1402] type 00 class 0x060000
269[ 0.592842] pci 0000:00:18.3: >[1022:1403] type 00 class 0x060000
270[ 0.592860] pci 0000:00:18.4: >[1022:1404] type 00 class 0x060000
271[ 0.592873] pci 0000:00:18.5: >[1022:1405] type 00 class 0x060000
272[ 0.592943] pci 0000:00:14.4: >PCI bridge to [bus 01-01] (subtractive decode)
273[ 0.600048] pci 0000:00:14.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
274[ 0.600050] pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
275[ 0.600051] pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
276[ 0.600053] pci 0000:00:14.4: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
277[ 0.600054] pci 0000:00:14.4: > bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
278[ 0.600109] pci 0000:02:00.0: >[197b:2363] type 00 class 0x010601
279[ 0.600194] pci 0000:02:00.0: >reg 24: [mem 0xf0010000-0xf00101ff]
280[ 0.600207] pci 0000:02:00.0: >reg 30: [mem 0xf0000000-0xf000ffff pref]
281[ 0.600267] pci 0000:02:00.0: >PME# supported from D3hot
282[ 0.600308] pci 0000:02:00.1: >[197b:0368] type 00 class 0x010185
283[ 0.600326] pci 0000:02:00.1: >reg 10: [io 0x1010-0x1017]
284[ 0.600338] pci 0000:02:00.1: >reg 14: [io 0x1020-0x1023]
285[ 0.600351] pci 0000:02:00.1: >reg 18: [io 0x1018-0x101f]
286[ 0.600364] pci 0000:02:00.1: >reg 1c: [io 0x1024-0x1027]
287[ 0.600376] pci 0000:02:00.1: >reg 20: [io 0x1000-0x100f]
288[ 0.604793] pci 0000:00:15.0: >PCI bridge to [bus 02-02]
289[ 0.610092] pci 0000:00:15.0: > bridge window [io 0x1000-0x1fff]
290[ 0.610095] pci 0000:00:15.0: > bridge window [mem 0xf0000000-0xf00fffff]
291[ 0.610159] pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000
292[ 0.610176] pci 0000:03:00.0: >reg 10: [io 0x2000-0x20ff]
293[ 0.610203] pci 0000:03:00.0: >reg 18: [mem 0xf0104000-0xf0104fff 64bit pref]
294[ 0.610219] pci 0000:03:00.0: >reg 20: [mem 0xf0100000-0xf0103fff 64bit pref]
295[ 0.610294] pci 0000:03:00.0: >supports D1 D2
296[ 0.610296] pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
297[ 0.616743] pci 0000:00:15.1: >PCI bridge to [bus 03-03]
298[ 0.622043] pci 0000:00:15.1: > bridge window [io 0x2000-0x2fff]
299[ 0.622049] pci 0000:00:15.1: > bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
300[ 0.622068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
301[ 0.622246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT]
302[ 0.622272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR0._PRT]
303[ 0.622298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR1._PRT]
304[ 0.622357] pci0000:00: >Requesting ACPI _OSC control (0x1d)
305[ 0.628116] pci0000:00: >ACPI _OSC control (0x1d) granted
306[ 0.637838] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
307[ 0.644811] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
308[ 0.651787] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
309[ 0.658757] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
310[ 0.665725] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
311[ 0.672702] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
312[ 0.677996] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
313[ 0.684967] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
314[ 0.691989] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
315[ 0.700051] vgaarb: loaded
316[ 0.702746] vgaarb: bridge control possible 0000:00:01.0
317[ 0.708173] SCSI subsystem initialized
318[ 0.712016] libata version 3.00 loaded.
319[ 0.712032] ACPI: bus type usb registered
320[ 0.716044] usbcore: registered new interface driver usbfs
321[ 0.721508] usbcore: registered new interface driver hub
322[ 0.726894] usbcore: registered new device driver usb
323[ 0.732068] PCI: Using ACPI for IRQ routing
324[ 0.736236] PCI: pci_cache_line_size set to 64 bytes
325[ 0.736309] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
326[ 0.736310] e820: reserve RAM buffer [mem 0xbf130000-0xbfffffff]
327[ 0.736312] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
328[ 0.736383] NetLabel: Initializing
329[ 0.739765] NetLabel: domain hash size = 128
330[ 0.744102] NetLabel: protocols = UNLABELED CIPSOv4
331[ 0.749051] NetLabel: unlabeled traffic allowed by default
332[ 0.754639] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
333[ 0.759560] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
334[ 0.767373] Switching to clocksource hpet
335[ 0.777309] AppArmor: AppArmor Filesystem Enabled
336[ 0.782027] pnp: PnP ACPI init
337[ 0.785090] ACPI: bus type pnp registered
338[ 0.789163] pnp 00:00: >[bus 00-ff]
339[ 0.789168] pnp 00:00: >[io 0x0cf8-0x0cff]
340[ 0.789170] pnp 00:00: >[io 0x0000-0x0cf7 window]
341[ 0.789171] pnp 00:00: >[io 0x03b0-0x03df window]
342[ 0.789173] pnp 00:00: >[io 0x0d00-0xffff window]
343[ 0.789174] pnp 00:00: >[mem 0x000a0000-0x000bffff]
344[ 0.789176] pnp 00:00: >[mem 0x000c0000-0x000dffff]
345[ 0.789177] pnp 00:00: >[mem 0xe0000000-0xffffffff]
346[ 0.789212] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
347[ 0.789273] pnp 00:01: >[mem 0xf024fb02-0xf0250b01]
348[ 0.789320] system 00:01: >[mem 0xf024fb02-0xf0250b01] has been reserved
349[ 0.795993] system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
350[ 0.796009] pnp 00:02: >[irq 8]
351[ 0.796010] pnp 00:02: >[io 0x0070-0x0071]
352[ 0.796030] pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
353[ 0.796038] pnp 00:03: >[io 0x0061]
354[ 0.796059] pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
355[ 0.796069] pnp 00:04: >[dma 4]
356[ 0.796070] pnp 00:04: >[io 0x0000-0x000f]
357[ 0.796071] pnp 00:04: >[io 0x0081-0x0083]
358[ 0.796073] pnp 00:04: >[io 0x0087]
359[ 0.796074] pnp 00:04: >[io 0x0089-0x008b]
360[ 0.796075] pnp 00:04: >[io 0x008f]
361[ 0.796076] pnp 00:04: >[io 0x00c0-0x00df]
362[ 0.796096] pnp 00:04: >Plug and Play ACPI device, IDs PNP0200 (active)
363[ 0.796102] pnp 00:05: >[io 0x00f0-0x00ff]
364[ 0.796105] pnp 00:05: >[irq 13]
365[ 0.796127] pnp 00:05: >Plug and Play ACPI device, IDs PNP0c04 (active)
366[ 0.796220] pnp: PnP ACPI: found 6 devices
367[ 0.800299] ACPI: ACPI bus type pnp unregistered
368[ 0.811188] pci 0000:00:14.4: >PCI bridge to [bus 01-01]
369[ 0.816493] pci 0000:00:15.0: >PCI bridge to [bus 02-02]
370[ 0.821786] pci 0000:00:15.0: > bridge window [io 0x1000-0x1fff]
371[ 0.827944] pci 0000:00:15.0: > bridge window [mem 0xf0000000-0xf00fffff]
372[ 0.834796] pci 0000:00:15.1: >PCI bridge to [bus 03-03]
373[ 0.840095] pci 0000:00:15.1: > bridge window [io 0x2000-0x2fff]
374[ 0.846255] pci 0000:00:15.1: > bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
375[ 0.854079] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
376[ 0.854081] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
377[ 0.854082] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
378[ 0.854084] pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
379[ 0.854085] pci_bus 0000:00: >resource 8 [mem 0xe0000000-0xffffffff]
380[ 0.854087] pci_bus 0000:01: >resource 4 [io 0x0000-0x0cf7]
381[ 0.854088] pci_bus 0000:01: >resource 5 [io 0x0d00-0xffff]
382[ 0.854090] pci_bus 0000:01: >resource 6 [mem 0x000a0000-0x000bffff]
383[ 0.854091] pci_bus 0000:01: >resource 7 [mem 0x000c0000-0x000dffff]
384[ 0.854092] pci_bus 0000:01: >resource 8 [mem 0xe0000000-0xffffffff]
385[ 0.854094] pci_bus 0000:02: >resource 0 [io 0x1000-0x1fff]
386[ 0.854095] pci_bus 0000:02: >resource 1 [mem 0xf0000000-0xf00fffff]
387[ 0.854097] pci_bus 0000:03: >resource 0 [io 0x2000-0x2fff]
388[ 0.854098] pci_bus 0000:03: >resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
389[ 0.854122] NET: Registered protocol family 2
390[ 0.858628] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
391[ 0.866891] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
392[ 0.876131] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
393[ 0.883032] TCP: Hash tables configured (established 524288 bind 65536)
394[ 0.889620] TCP: reno registered
395[ 0.892852] UDP hash table entries: 4096 (order: 5, 131072 bytes)
396[ 0.898961] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
397[ 0.905546] NET: Registered protocol family 1
398[ 0.909904] pci 0000:00:01.0: >Boot video device
399[ 0.910160] PCI: CLS 64 bytes, default 64
400[ 0.910162] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
401[ 0.916584] software IO TLB [mem 0xbb12e000-0xbf12dfff] (64MB) mapped at [ffff8800bb12e000-ffff8800bf12dfff]
402[ 0.926738] LVT offset 0 assigned for vector 0x400
403[ 0.931583] perf: AMD IBS detected (0x000000ff)
404[ 0.936338] audit: initializing netlink socket (disabled)
405[ 0.941725] type=2000 audit(1399322437.736:1): initialized
406[ 0.963683] HugeTLB registered 2 MB page size, pre-allocated 0 pages
407[ 0.971936] VFS: Disk quotas dquot_6.5.2
408[ 0.975876] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
409[ 0.982756] fuse init (API version 7.19)
410[ 0.986730] msgmni has been set to 14896
411[ 0.991077] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
412[ 0.998544] io scheduler noop registered
413[ 1.002453] io scheduler deadline registered (default)
414[ 1.007601] io scheduler cfq registered
415[ 1.011555] pcieport 0000:00:15.0: >irq 40 for MSI/MSI-X
416[ 1.011642] pcieport 0000:00:15.1: >irq 41 for MSI/MSI-X
417[ 1.011710] pcieport 0000:00:15.0: >Signaling PME through PCIe PME interrupt
418[ 1.018733] pci 0000:02:00.0: >Signaling PME through PCIe PME interrupt
419[ 1.025321] pci 0000:02:00.1: >Signaling PME through PCIe PME interrupt
420[ 1.031912] pcie_pme 0000:00:15.0:pcie01: >service driver pcie_pme loaded
421[ 1.031931] pcieport 0000:00:15.1: >Signaling PME through PCIe PME interrupt
422[ 1.038949] pci 0000:03:00.0: >Signaling PME through PCIe PME interrupt
423[ 1.045540] pcie_pme 0000:00:15.1:pcie01: >service driver pcie_pme loaded
424[ 1.045553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
425[ 1.051124] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
426[ 1.057799] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
427[ 1.065946] ACPI: Power Button [PWRB]
428[ 1.069627] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
429[ 1.076989] ACPI: Power Button [PWRF]
430[ 1.080691] ACPI: acpi_idle registered with cpuidle
431[ 1.082015] GHES: Failed to enable APEI firmware first mode.
432[ 1.087757] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
433[ 1.114383] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
434[ 1.121447] Linux agpgart interface v0.103
435[ 1.126618] brd: module loaded
436[ 1.130313] loop: module loaded
437[ 1.133515] ahci 0000:00:11.0: >version 3.0
438[ 1.133662] ahci 0000:00:11.0: >AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x10 impl SATA mode
439[ 1.141905] ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck led clo pio
440[ 1.149066] scsi0 : ahci
441[ 1.151774] scsi1 : ahci
442[ 1.154437] scsi2 : ahci
443[ 1.157084] scsi3 : ahci
444[ 1.159748] scsi4 : ahci
445[ 1.162403] scsi5 : ahci
446[ 1.165055] scsi6 : ahci
447[ 1.167715] scsi7 : ahci
448[ 1.170281] ata1: DUMMY
449[ 1.172719] ata2: DUMMY
450[ 1.175160] ata3: DUMMY
451[ 1.177598] ata4: DUMMY
452[ 1.180042] ata5: SATA max UDMA/133 abar m2048@0xf024f000 port 0xf024f300 irq 19
453[ 1.187406] ata6: DUMMY
454[ 1.189844] ata7: DUMMY
455[ 1.192282] ata8: DUMMY
456[ 1.194855] ahci 0000:02:00.0: >irq 42 for MSI/MSI-X
457[ 1.194935] ahci 0000:02:00.0: >AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
458[ 1.203083] ahci 0000:02:00.0: >flags: 64bit ncq pm led clo pmp pio slum part
459[ 1.210562] scsi8 : ahci
460[ 1.213204] scsi9 : ahci
461[ 1.215769] ata9: SATA max UDMA/133 abar m512@0xf0010000 port 0xf0010100 irq 42
462[ 1.223045] ata10: SATA max UDMA/133 abar m512@0xf0010000 port 0xf0010180 irq 42
463[ 1.230469] pata_acpi 0000:02:00.1: >enabling device (0000 -> 0001)
464[ 1.236936] Fixed MDIO Bus: probed
465[ 1.240356] tun: Universal TUN/TAP device driver, 1.6
466[ 1.245394] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
467[ 1.251672] PPP generic driver version 2.4.2
468[ 1.256045] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
469[ 1.262568] ehci_hcd 0000:00:12.2: >EHCI Host Controller
470[ 1.267869] ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
471[ 1.275324] ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
472[ 1.284091] QUIRK: Enable AMD PLL fix
473[ 1.284099] ehci_hcd 0000:00:12.2: >debug port 1
474[ 1.288719] ehci_hcd 0000:00:12.2: >irq 17, io mem 0xf024f800
475[ 1.305576] ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
476[ 1.311415] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
477[ 1.318262] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
478[ 1.325544] usb usb1: >Product: EHCI Host Controller
479[ 1.330491] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
480[ 1.336821] usb usb1: >SerialNumber: 0000:00:12.2
481[ 1.341682] hub 1-0:1.0: >USB hub found
482[ 1.345515] hub 1-0:1.0: >5 ports detected
483[ 1.349684] ehci_hcd 0000:00:13.2: >EHCI Host Controller
484[ 1.354978] ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
485[ 1.362435] ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
486[ 1.371198] ehci_hcd 0000:00:13.2: >debug port 1
487[ 1.375814] ehci_hcd 0000:00:13.2: >irq 17, io mem 0xf024f900
488[ 1.393263] ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
489[ 1.399105] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
490[ 1.405951] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
491[ 1.413231] usb usb2: >Product: EHCI Host Controller
492[ 1.418176] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
493[ 1.424508] usb usb2: >SerialNumber: 0000:00:13.2
494[ 1.429362] hub 2-0:1.0: >USB hub found
495[ 1.433191] hub 2-0:1.0: >5 ports detected
496[ 1.437338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
497[ 1.443535] ohci_hcd 0000:00:12.0: >OHCI Host Controller
498[ 1.448831] ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
499[ 1.456326] ohci_hcd 0000:00:12.0: >irq 18, io mem 0xf024c000
500[ 1.512858] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
501[ 1.523081] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
502[ 1.529537] ata5.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
503[ 1.529540] ata5.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
504[ 1.530498] ata5.00: configured for UDMA/133
505[ 1.530680] scsi 4:0:0:0: >Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
506[ 1.530811] sd 4:0:0:0: >Attached scsi generic sg0 type 0
507[ 1.530922] sd 4:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
508[ 1.530982] sd 4:0:0:0: >[sda] Write Protect is off
509[ 1.530983] sd 4:0:0:0: >[sda] Mode Sense: 00 3a 00 00
510[ 1.531006] sd 4:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
511[ 1.548667] ata9: SATA link down (SStatus 0 SControl 300)
512[ 1.585876] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
513[ 1.586609] sd 4:0:0:0: >[sda] Attached SCSI disk
514[ 1.597840] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
515[ 1.597925] ata10: SATA link down (SStatus 0 SControl 300)
516[ 1.610573] usb usb3: >Product: OHCI Host Controller
517[ 1.615520] usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
518[ 1.621850] usb usb3: >SerialNumber: 0000:00:12.0
519[ 1.626711] hub 3-0:1.0: >USB hub found
520[ 1.630542] hub 3-0:1.0: >5 ports detected
521[ 1.634705] ohci_hcd 0000:00:13.0: >OHCI Host Controller
522[ 1.639997] ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 4
523[ 1.647464] ohci_hcd 0000:00:13.0: >irq 18, io mem 0xf024d000
524[ 1.712126] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
525[ 1.718988] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
526[ 1.726277] usb usb4: >Product: OHCI Host Controller
527[ 1.731231] usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
528[ 1.737574] usb usb4: >SerialNumber: 0000:00:13.0
529[ 1.742414] hub 4-0:1.0: >USB hub found
530[ 1.746244] hub 4-0:1.0: >5 ports detected
531[ 1.750406] ohci_hcd 0000:00:14.5: >OHCI Host Controller
532[ 1.755700] ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 5
533[ 1.763163] ohci_hcd 0000:00:14.5: >irq 18, io mem 0xf024e000
534[ 1.827707] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
535[ 1.834568] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
536[ 1.841857] usb usb5: >Product: OHCI Host Controller
537[ 1.846812] usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
538[ 1.853155] usb usb5: >SerialNumber: 0000:00:14.5
539[ 1.857990] hub 5-0:1.0: >USB hub found
540[ 1.861817] hub 5-0:1.0: >2 ports detected
541[ 1.865955] uhci_hcd: USB Universal Host Controller Interface driver
542[ 1.872334] xhci_hcd 0000:00:10.0: >xHCI Host Controller
543[ 1.877628] xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 6
544[ 1.885266] xhci_hcd 0000:00:10.0: >irq 18, io mem 0xf0248000
545[ 1.891050] xhci_hcd 0000:00:10.0: >irq 43 for MSI/MSI-X
546[ 1.891054] xhci_hcd 0000:00:10.0: >irq 44 for MSI/MSI-X
547[ 1.891059] xhci_hcd 0000:00:10.0: >irq 45 for MSI/MSI-X
548[ 1.891066] xhci_hcd 0000:00:10.0: >irq 46 for MSI/MSI-X
549[ 1.891070] xhci_hcd 0000:00:10.0: >irq 47 for MSI/MSI-X
550[ 1.891147] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0002
551[ 1.897997] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
552[ 1.905275] usb usb6: >Product: xHCI Host Controller
553[ 1.910233] usb usb6: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
554[ 1.916580] usb usb6: >SerialNumber: 0000:00:10.0
555[ 1.919372] Refined TSC clocksource calibration: 3793.098 MHz.
556[ 1.919375] Switching to clocksource tsc
557[ 1.931056] xHCI xhci_add_endpoint called for root hub
558[ 1.931057] xHCI xhci_check_bandwidth called for root hub
559[ 1.931073] hub 6-0:1.0: >USB hub found
560[ 1.934906] hub 6-0:1.0: >2 ports detected
561[ 1.939036] xhci_hcd 0000:00:10.0: >xHCI Host Controller
562[ 1.944335] xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 7
563[ 1.951823] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0003
564[ 1.958676] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
565[ 1.965967] usb usb7: >Product: xHCI Host Controller
566[ 1.970913] usb usb7: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
567[ 1.977261] usb usb7: >SerialNumber: 0000:00:10.0
568[ 1.982066] xHCI xhci_add_endpoint called for root hub
569[ 1.982067] xHCI xhci_check_bandwidth called for root hub
570[ 1.982084] hub 7-0:1.0: >USB hub found
571[ 1.985915] hub 7-0:1.0: >2 ports detected
572[ 1.990146] xhci_hcd 0000:00:10.1: >xHCI Host Controller
573[ 1.995457] xhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 8
574[ 2.003096] xhci_hcd 0000:00:10.1: >irq 17, io mem 0xf024a000
575[ 2.008863] xhci_hcd 0000:00:10.1: >irq 48 for MSI/MSI-X
576[ 2.008867] xhci_hcd 0000:00:10.1: >irq 49 for MSI/MSI-X
577[ 2.008871] xhci_hcd 0000:00:10.1: >irq 50 for MSI/MSI-X
578[ 2.008875] xhci_hcd 0000:00:10.1: >irq 51 for MSI/MSI-X
579[ 2.008879] xhci_hcd 0000:00:10.1: >irq 52 for MSI/MSI-X
580[ 2.008962] usb usb8: >New USB device found, idVendor=1d6b, idProduct=0002
581[ 2.015816] usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
582[ 2.023093] usb usb8: >Product: xHCI Host Controller
583[ 2.028039] usb usb8: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
584[ 2.034369] usb usb8: >SerialNumber: 0000:00:10.1
585[ 2.039138] xHCI xhci_add_endpoint called for root hub
586[ 2.039140] xHCI xhci_check_bandwidth called for root hub
587[ 2.039160] hub 8-0:1.0: >USB hub found
588[ 2.042990] hub 8-0:1.0: >2 ports detected
589[ 2.047121] xhci_hcd 0000:00:10.1: >xHCI Host Controller
590[ 2.052410] xhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 9
591[ 2.059890] usb usb9: >New USB device found, idVendor=1d6b, idProduct=0003
592[ 2.066735] usb usb9: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
593[ 2.074007] usb usb9: >Product: xHCI Host Controller
594[ 2.078955] usb usb9: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
595[ 2.085285] usb usb9: >SerialNumber: 0000:00:10.1
596[ 2.090022] xHCI xhci_add_endpoint called for root hub
597[ 2.090023] xHCI xhci_check_bandwidth called for root hub
598[ 2.090039] hub 9-0:1.0: >USB hub found
599[ 2.093865] hub 9-0:1.0: >2 ports detected
600[ 2.098160] usbcore: registered new interface driver libusual
601[ 2.103930] i8042: PNP: No PS/2 controller found. Probing ports directly.
602[ 2.361857] serio: i8042 KBD port at 0x60,0x64 irq 1
603[ 2.366957] mousedev: PS/2 mouse device common for all mice
604[ 2.372681] rtc_cmos 00:02: >RTC can wake from S4
605[ 2.377522] rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
606[ 2.383698] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
607[ 2.389915] device-mapper: uevent: version 1.0.3
608[ 2.394643] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
609[ 2.403092] cpuidle: using governor ladder
610[ 2.407286] cpuidle: using governor menu
611[ 2.411198] EFI Variables Facility v0.08 2004-May-17
612[ 2.416179] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
613[ 2.424925] ashmem: initialized
614[ 2.428204] TCP: cubic registered
615[ 2.431581] NET: Registered protocol family 10
616[ 2.436144] NET: Registered protocol family 17
617[ 2.440572] Key type dns_resolver registered
618[ 2.445015] PM: Hibernation image not present or could not be loaded.
619[ 2.445024] registered taskstats version 1
620[ 2.451134] Key type trusted registered
621[ 2.456458] Key type encrypted registered
622[ 2.462304] Magic number: 14:622:699
623[ 2.466130] rtc_cmos 00:02: >setting system clock to 2014-05-05 20:40:40 UTC (1399322440)
624[ 2.474365] powernow-k8: Found 1 AMD A10-5800K APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00)
625[ 2.484545] powernow-k8: Core Performance Boosting: on.
626[ 2.489850] powernow-k8: 0 : pstate 0 (3800 MHz)
627[ 2.494703] powernow-k8: 1 : pstate 1 (3400 MHz)
628[ 2.499567] powernow-k8: 2 : pstate 2 (2900 MHz)
629[ 2.504435] powernow-k8: 3 : pstate 3 (2400 MHz)
630[ 2.509299] powernow-k8: 4 : pstate 4 (1900 MHz)
631[ 2.514152] powernow-k8: 5 : pstate 5 (1400 MHz)
632[ 2.519356] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
633[ 2.525345] EDD information not available.
634[ 2.531610] Freeing unused kernel memory: 928k freed
635[ 2.536753] Write protecting the kernel read-only data: 12288k
636[ 2.548142] Freeing unused kernel memory: 1472k freed
637[ 2.557615] Freeing unused kernel memory: 1124k freed
638[ 2.578517] udevd[114]: starting version 175
639[ 2.604893] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
640[ 2.610795] sdhci: Secure Digital Host Controller Interface driver
641[ 2.612287] r8169 0000:03:00.0: >irq 53 for MSI/MSI-X
642[ 2.612456] r8169 0000:03:00.0: >eth0: RTL8168f/8111f at 0xffffc90001794000, 08:60:6e:d4:a8:d8, XID 08000800 IRQ 53
643[ 2.612457] r8169 0000:03:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
644[ 2.636052] sdhci: Copyright(c) Pierre Ossman
645[ 2.640594] scsi10 : pata_jmicron
646[ 2.645668] sdhci-pci 0000:00:14.7: >SDHCI controller found [1022:7806] (rev 0)
647[ 2.647360] scsi11 : pata_jmicron
648[ 2.647431] ata11: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 17
649[ 2.647432] ata12: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 17
650[ 2.670726] mmc0: no vmmc regulator found
651[ 2.674785] Registered led device: mmc0::
652[ 2.704488] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
653[ 2.808771] ata11.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.07, max UDMA/33
654[ 2.828715] ata11.00: configured for UDMA/33
655[ 2.837512] scsi 10:0:0:0: >CD-ROM _NEC DVD_RW ND-3520AW 3.07 PQ: 0 ANSI: 5
656[ 2.847680] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
657[ 2.854446] cdrom: Uniform CD-ROM driver Revision: 3.20
658[ 2.859788] sr 10:0:0:0: >Attached scsi CD-ROM sr0
659[ 2.859964] sr 10:0:0:0: >Attached scsi generic sg1 type 5
660[ 2.911615] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
661[ 2.918480] EXT4-fs (sda7): write access will be enabled during recovery
662[ 4.171705] EXT4-fs (sda7): recovery complete
663[ 4.179818] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
664[ 13.987403] Adding 979928k swap on /dev/sda6. Priority:-1 extents:1 across:979928k
665[ 13.999123] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
666[ 14.045321] udevd[370]: starting version 175
667[ 14.061474] lp: driver loaded but no devices found
668[ 14.079485] [drm] Initialized drm 1.1.0 20060810
669[ 14.084182] [drm] radeon defaulting to kernel modesetting.
670[ 14.084186] [drm] radeon kernel modesetting enabled.
671[ 14.084379] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1002:0x9901).
672[ 14.084418] [drm] register mmio base: 0xF0200000
673[ 14.084419] [drm] register mmio size: 262144
674[ 14.084489] ATOM BIOS: 113
675[ 14.084514] radeon 0000:00:01.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
676[ 14.084516] radeon 0000:00:01.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
677[ 14.084985] [drm] Detected VRAM RAM=512M, BAR=256M
678[ 14.084988] [drm] RAM width 64bits DDR
679[ 14.085106] [TTM] Zone kernel: Available graphics memory: 3815306 kiB
680[ 14.085108] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
681[ 14.085109] [TTM] Initializing pool allocator
682[ 14.085120] [TTM] Initializing DMA pool allocator
683[ 14.085143] [drm] radeon: 512M of VRAM memory ready
684[ 14.085146] [drm] radeon: 512M of GTT memory ready.
685[ 14.085173] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
686[ 14.085175] [drm] Driver supports precise vblank timestamp query.
687[ 14.085208] radeon 0000:00:01.0: >irq 54 for MSI/MSI-X
688[ 14.085221] radeon 0000:00:01.0: >radeon: using MSI.
689[ 14.085745] [drm] radeon: irq initialized.
690[ 14.085750] [drm] GART: num cpu pages 131072, num gpu pages 131072
691[ 14.086455] [drm] Loading ARUBA Microcode
692[ 14.128785] microcode: CPU0: patch_level=0x0600110f
693[ 14.243514] microcode: CPU0: new patch_level=0x06001119
694[ 14.243603] microcode: CPU1: patch_level=0x0600110f
695[ 14.245725] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
696[ 14.259387] microcode: CPU1: new patch_level=0x06001119
697[ 14.259410] microcode: CPU2: patch_level=0x0600110f
698[ 14.259431] radeon 0000:00:01.0: >WB enabled
699[ 14.259434] radeon 0000:00:01.0: >fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801fa328c00
700[ 14.259436] radeon 0000:00:01.0: >fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8801fa328c04
701[ 14.259438] radeon 0000:00:01.0: >fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8801fa328c08
702[ 14.275209] microcode: CPU2: new patch_level=0x06001119
703[ 14.275236] microcode: CPU3: patch_level=0x0600110f
704[ 14.291032] microcode: CPU3: new patch_level=0x06001119
705[ 14.291119] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
706[ 14.296644] kvm: Nested Virtualization enabled
707[ 14.296648] kvm: Nested Paging enabled
708[ 14.305897] [drm] ring test on 0 succeeded in 2 usecs
709[ 14.306706] [drm] ib test on ring 0 succeeded in 0 usecs
710[ 14.320107] [drm] Radeon Display Connectors
711[ 14.320110] [drm] Connector 0:
712[ 14.320111] [drm] HDMI-A-1
713[ 14.320112] [drm] HPD1
714[ 14.320114] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
715[ 14.320115] [drm] Encoders:
716[ 14.320116] [drm] DFP1: INTERNAL_UNIPHY2
717[ 14.320118] [drm] Connector 1:
718[ 14.320119] [drm] VGA-1
719[ 14.320119] [drm] HPD2
720[ 14.320121] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
721[ 14.320122] [drm] Encoders:
722[ 14.320123] [drm] CRT1: INTERNAL_UNIPHY2
723[ 14.320124] [drm] CRT1: NUTMEG
724[ 14.320124] [drm] Connector 2:
725[ 14.320125] [drm] DVI-D-1
726[ 14.320126] [drm] HPD3
727[ 14.320127] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
728[ 14.320127] [drm] Encoders:
729[ 14.320128] [drm] DFP2: INTERNAL_UNIPHY
730[ 14.332236] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
731[ 14.371964] [drm] Internal thermal controller without fan control
732[ 14.371979] [drm] radeon: power management initialized
733[ 14.387670] init: failsafe main process (646) killed by TERM signal
734[ 14.476399] Bluetooth: Core ver 2.16
735[ 14.476428] NET: Registered protocol family 31
736[ 14.476429] Bluetooth: HCI device and connection manager initialized
737[ 14.476674] Bluetooth: HCI socket layer initialized
738[ 14.476677] Bluetooth: L2CAP socket layer initialized
739[ 14.476682] Bluetooth: SCO socket layer initialized
740[ 14.481518] Bluetooth: RFCOMM TTY layer initialized
741[ 14.481523] Bluetooth: RFCOMM socket layer initialized
742[ 14.481524] Bluetooth: RFCOMM ver 1.11
743[ 14.483346] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
744[ 14.483349] Bluetooth: BNEP filters: protocol multicast
745[ 14.504012] ppdev: user-space parallel port driver
746[ 14.591124] r8169 0000:03:00.0: >eth4: link down
747[ 14.591155] r8169 0000:03:00.0: >eth4: link down
748[ 14.591645] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
749[ 14.591949] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
750[ 14.617973] [drm] fb mappable at 0xE1144000
751[ 14.617976] [drm] vram apper at 0xE0000000
752[ 14.617977] [drm] size 5242880
753[ 14.617979] [drm] fb depth is 24
754[ 14.617980] [drm] pitch is 5120
755[ 14.618172] fbcon: radeondrmfb (fb0) is primary device
756[ 14.740735] Console: switching to colour frame buffer device 160x64
757[ 14.743262] fb0: radeondrmfb frame buffer device
758[ 14.743262] drm: registered panic notifier
759[ 14.743268] [drm] Initialized radeon 2.18.0 20080528 for 0000:00:01.0 on minor 0
760[ 14.743356] piix4_smbus 0000:00:14.0: >SMBus Host Controller at 0xb00, revision 0
761[ 14.743718] hda-intel: Force to non-snoop mode
762[ 14.743768] snd_hda_intel 0000:00:01.1: >irq 55 for MSI/MSI-X
763[ 14.768887] init: plymouth main process (289) killed by ABRT signal
764[ 14.769091] init: plymouth-splash main process (796) terminated with status 2
765[ 15.261725] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
766[ 15.261835] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
767[ 15.316831] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
768[ 15.316927] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
769[ 15.316990] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
770[ 15.317052] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
771[ 15.317115] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
772[ 15.317178] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
773[ 15.317236] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
774[ 15.317296] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
775[ 15.459486] init: alsa-restore main process (1023) terminated with status 99
776[ 16.185076] init: plymouth-stop pre-start process (1381) terminated with status 1
777[ 16.903437] r8169 0000:03:00.0: >eth4: link up
778[ 16.904660] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
779[ 20.127972] UDF-fs: Partition marked readonly; forcing readonly mount
780[ 20.156438] UDF-fs: INFO Mounting volume 'Muz z Acapulca', timestamp 2008/10/02 11:59 (1078)
781[ 72.968155] PM: Syncing filesystems ... done.
782[ 73.037530] PM: Preparing system for mem sleep
783[ 73.058244] Freezing user space processes ... (elapsed 0.01 seconds) done.
784[ 73.071729] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
785[ 73.087710] PM: Entering mem sleep
786[ 73.087729] Suspending console(s) (use no_console_suspend to debug)
787[ 73.099694] sd 4:0:0:0: >[sda] Synchronizing SCSI cache
788[ 73.099859] sd 4:0:0:0: >[sda] Stopping disk
789[ 73.203159] ACPI handle has no context!
790[ 73.219076] PM: suspend of drv:snd_hda_intel dev:0000:00:01.1 complete after 117.481 msecs
791[ 73.219085] PM: suspend of drv:snd_hda_intel dev:0000:00:14.2 complete after 119.011 msecs
792[ 73.659605] PM: suspend of drv:sd dev:4:0:0:0 complete after 561.648 msecs
793[ 73.659637] PM: suspend of drv:scsi dev:target4:0:0 complete after 561.632 msecs
794[ 73.659648] PM: suspend of drv:scsi dev:host4 complete after 561.375 msecs
795[ 73.659704] PM: suspend of drv: dev:ata5 complete after 561.343 msecs
796[ 73.667372] PM: suspend of drv:ahci dev:0000:00:11.0 complete after 566.708 msecs
797[ 74.251887] PM: suspend of drv:radeon dev:0000:00:01.0 complete after 1153.444 msecs
798[ 74.251905] PM: suspend of drv: dev:pci0000:00 complete after 1153.417 msecs
799[ 74.251917] PM: suspend of devices complete after 1167.470 msecs
800[ 74.251920] PM: suspend devices took 1.168 seconds
801[ 74.252202] PM: late suspend of devices complete after 0.279 msecs
802[ 74.252557] pcieport 0000:00:15.1: >wake-up capability enabled by ACPI
803[ 74.267904] ohci_hcd 0000:00:14.5: >wake-up capability enabled by ACPI
804[ 74.267981] ehci_hcd 0000:00:13.2: >wake-up capability enabled by ACPI
805[ 74.283819] ohci_hcd 0000:00:13.0: >wake-up capability enabled by ACPI
806[ 74.283865] ehci_hcd 0000:00:12.2: >wake-up capability enabled by ACPI
807[ 74.299756] ohci_hcd 0000:00:12.0: >wake-up capability enabled by ACPI
808[ 74.299806] xhci_hcd 0000:00:10.1: >wake-up capability enabled by ACPI
809[ 74.315754] xhci_hcd 0000:00:10.0: >wake-up capability enabled by ACPI
810[ 74.331693] PM: noirq suspend of devices complete after 79.733 msecs
811[ 74.331861] ACPI: Preparing to enter system sleep state S3
812[ 74.331948] PM: Saving platform NVS memory
813[ 74.331950] Disabling non-boot CPUs ...
814[ 74.435315] CPU 1 is now offline
815[ 74.542984] CPU 2 is now offline
816[ 74.543666] Broke affinity for irq 17
817[ 74.646654] CPU 3 is now offline
818[ 74.647232] ACPI: Low-level resume complete
819[ 74.647261] PM: Restoring platform NVS memory
820[ 74.647446] LVT offset 0 assigned for vector 0xf9
821[ 74.661765] microcode: CPU0: new patch_level=0x06001119
822[ 74.661814] Enabling non-boot CPUs ...
823[ 74.661887] Booting Node 0 Processor 1 APIC 0x11
824[ 74.672804] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
825[ 74.672805] perf: IBS APIC setup failed on cpu #1
826[ 74.689657] microcode: CPU1: new patch_level=0x06001119
827[ 74.689697] CPU1 is up
828[ 74.689772] Booting Node 0 Processor 2 APIC 0x12
829[ 74.700695] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
830[ 74.700696] perf: IBS APIC setup failed on cpu #2
831[ 74.717509] microcode: CPU2: new patch_level=0x06001119
832[ 74.717521] CPU2 is up
833[ 74.717583] Booting Node 0 Processor 3 APIC 0x13
834[ 74.728493] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
835[ 74.728494] perf: IBS APIC setup failed on cpu #3
836[ 74.745241] microcode: CPU3: new patch_level=0x06001119
837[ 74.745250] CPU3 is up
838[ 74.745751] ACPI: Waking up from system sleep state S3
839[ 74.745988] xhci_hcd 0000:00:10.0: >wake-up capability disabled by ACPI
840[ 74.746063] xhci_hcd 0000:00:10.1: >wake-up capability disabled by ACPI
841[ 74.746113] ohci_hcd 0000:00:12.0: >wake-up capability disabled by ACPI
842[ 74.758932] ehci_hcd 0000:00:12.2: >wake-up capability disabled by ACPI
843[ 74.758959] ohci_hcd 0000:00:13.0: >wake-up capability disabled by ACPI
844[ 74.774889] ehci_hcd 0000:00:13.2: >wake-up capability disabled by ACPI
845[ 74.775047] ohci_hcd 0000:00:14.5: >wake-up capability disabled by ACPI
846[ 74.825494] PM: noirq resume of devices complete after 79.910 msecs
847[ 74.825721] PM: early resume of devices complete after 0.166 msecs
848[ 74.825818] snd_hda_intel 0000:00:01.1: >irq 55 for MSI/MSI-X
849[ 74.826126] pcieport 0000:00:15.1: >wake-up capability disabled by ACPI
850[ 74.838974] [drm] PCIE GART of 512M enabled (table at 0x0000000000144000).
851[ 74.839122] radeon 0000:00:01.0: >WB enabled
852[ 74.839124] radeon 0000:00:01.0: >fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801fa328c00
853[ 74.839125] radeon 0000:00:01.0: >fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8801fa328c04
854[ 74.839126] radeon 0000:00:01.0: >fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8801fa328c08
855[ 74.857725] [drm] ring test on 0 succeeded in 1 usecs
856[ 74.858290] [drm] ib test on ring 0 succeeded in 0 usecs
857[ 74.899801] r8169 0000:03:00.0: >eth4: link down
858[ 74.982299] PM: resume of drv:hub dev:1-0:1.0 complete after 156.390 msecs
859[ 74.982321] PM: resume of drv: dev:ep_00 complete after 156.396 msecs
860[ 74.982326] PM: resume of drv: dev:ep_81 complete after 156.408 msecs
861[ 74.998080] PM: resume of drv:scsi dev:host11 complete after 164.925 msecs
862[ 74.998088] PM: resume of drv:scsi_host dev:host11 complete after 164.904 msecs
863[ 75.141807] ata9: SATA link down (SStatus 0 SControl 300)
864[ 75.145783] ata10: SATA link down (SStatus 0 SControl 300)
865[ 75.146982] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
866[ 75.157805] PM: resume of drv:scsi dev:host8 complete after 332.505 msecs
867[ 75.157834] PM: resume of drv:scsi_host dev:host8 complete after 332.527 msecs
868[ 75.161769] PM: resume of drv:scsi dev:host9 complete after 336.472 msecs
869[ 75.161803] PM: resume of drv:scsi_host dev:host9 complete after 336.476 msecs
870[ 75.168919] ata5.00: configured for UDMA/133
871[ 75.169032] PM: resume of drv:scsi dev:host4 complete after 343.808 msecs
872[ 75.169042] PM: resume of drv:ata_port dev:ata5 complete after 297.570 msecs
873[ 75.169049] PM: resume of drv:scsi_host dev:host4 complete after 343.828 msecs
874[ 75.169067] PM: resume of drv:scsi dev:target4:0:0 complete after 343.697 msecs
875[ 75.169080] PM: resume of drv:sd dev:4:0:0:0 complete after 343.705 msecs
876[ 75.169089] sd 4:0:0:0: >[sda] Starting disk
877[ 75.176712] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 351.349 msecs
878[ 75.202683] ata11.00: configured for UDMA/33
879[ 75.281437] PM: resume of drv:ata_port dev:ata11 complete after 104.934 msecs
880[ 75.281441] PM: resume of drv:scsi dev:host10 complete after 449.215 msecs
881[ 75.281465] PM: resume of drv:scsi dev:target10:0:0 complete after 449.121 msecs
882[ 75.281473] PM: resume of drv:scsi_host dev:host10 complete after 449.216 msecs
883[ 75.281477] PM: resume of drv:sr dev:10:0:0:0 complete after 449.099 msecs
884[ 75.281568] PM: resume of drv:scsi_device dev:10:0:0:0 complete after 449.161 msecs
885[ 75.341648] PM: resume of devices complete after 517.508 msecs
886[ 75.341927] PM: resume devices took 0.520 seconds
887[ 75.382866] PM: Finishing wakeup.
888[ 75.382873] Restarting tasks ... done.
889[ 75.492627] usb 1-2: >new high-speed USB device number 2 using ehci_hcd
890[ 75.626025] usb 1-2: >New USB device found, idVendor=0457, idProduct=0151
891[ 75.626033] usb 1-2: >New USB device strings: Mfr=0, Product=2, SerialNumber=3
892[ 75.626037] usb 1-2: >Product: USB Mass Storage Device
893[ 75.626041] usb 1-2: >SerialNumber: a5a33ce13d26a5
894[ 75.702382] Initializing USB Mass Storage driver...
895[ 75.702613] usb-storage 1-2:1.0: >Quirks match for vid 0457 pid 0151: 80
896[ 75.702671] scsi12 : usb-storage 1-2:1.0
897[ 75.702835] usbcore: registered new interface driver usb-storage
898[ 75.702838] USB Mass Storage support registered.
899[ 75.709980] usbcore: registered new interface driver uas
900[ 76.698515] scsi 12:0:0:0: >Direct-Access USB 2.0 Flash Disk 0.00 PQ: 0 ANSI: 2
901[ 76.699332] sd 12:0:0:0: >Attached scsi generic sg2 type 0
902[ 76.700283] sd 12:0:0:0: >[sdb] 512000 512-byte logical blocks: (262 MB/250 MiB)
903[ 76.700965] sd 12:0:0:0: >[sdb] Write Protect is off
904[ 76.700972] sd 12:0:0:0: >[sdb] Mode Sense: 00 00 00 00
905[ 76.702530] sd 12:0:0:0: >[sdb] Asking for cache data failed
906[ 76.708223] sd 12:0:0:0: >[sdb] Assuming drive cache: write through
907[ 76.717669] sd 12:0:0:0: >[sdb] Asking for cache data failed
908[ 76.723351] sd 12:0:0:0: >[sdb] Assuming drive cache: write through
909[ 76.837765] sdb: sdb1
910[ 76.841026] sd 12:0:0:0: >[sdb] Asking for cache data failed
911[ 76.846694] sd 12:0:0:0: >[sdb] Assuming drive cache: write through
912[ 76.852966] sd 12:0:0:0: >[sdb] Attached SCSI removable disk
913[ 77.259189] r8169 0000:03:00.0: >eth4: link up
914[ 87.452424] VFS: busy inodes on changed media or resized disk sr0