Vladimir Serbinenko | 3d2cdfb | 2014-08-30 19:38:02 +0200 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09) |
| 5 | [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| 8 | [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| 13 | [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| 14 | [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfecffff] usable |
| 15 | [ 0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfffffff] type 16 |
| 16 | [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved |
| 17 | [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| 18 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable |
| 19 | [ 0.000000] NX (Execute Disable) protection: active |
| 20 | [ 0.000000] SMBIOS 2.7 present. |
| 21 | [ 0.000000] DMI: LENOVO 4299Y48/4299Y48, BIOS CBET4000 4.0-6835-g8603513 08/30/2014 |
| 22 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 23 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 24 | [ 0.000000] No AGP bridge found |
| 25 | [ 0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000 |
| 26 | [ 0.000000] MTRR default type: write-back |
| 27 | [ 0.000000] MTRR fixed ranges enabled: |
| 28 | [ 0.000000] 00000-9FFFF write-back |
| 29 | [ 0.000000] A0000-BFFFF uncachable |
| 30 | [ 0.000000] C0000-FFFFF write-back |
| 31 | [ 0.000000] MTRR variable ranges enabled: |
| 32 | [ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable |
| 33 | [ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining |
| 34 | [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable |
| 35 | [ 0.000000] 3 disabled |
| 36 | [ 0.000000] 4 disabled |
| 37 | [ 0.000000] 5 disabled |
| 38 | [ 0.000000] 6 disabled |
| 39 | [ 0.000000] 7 disabled |
| 40 | [ 0.000000] 8 disabled |
| 41 | [ 0.000000] 9 disabled |
| 42 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 43 | [ 0.000000] e820: last_pfn = 0xbfed0 max_arch_pfn = 0x400000000 |
| 44 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 45 | [ 0.000000] reserving inaccessible SNB gfx pages |
| 46 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 47 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 48 | [ 0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE |
| 49 | [ 0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE |
| 50 | [ 0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE |
| 51 | [ 0.000000] init_memory_mapping: [mem 0x43b400000-0x43b5fffff] |
| 52 | [ 0.000000] [mem 0x43b400000-0x43b5fffff] page 2M |
| 53 | [ 0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE |
| 54 | [ 0.000000] init_memory_mapping: [mem 0x438000000-0x43b3fffff] |
| 55 | [ 0.000000] [mem 0x438000000-0x43b3fffff] page 2M |
| 56 | [ 0.000000] init_memory_mapping: [mem 0x400000000-0x437ffffff] |
| 57 | [ 0.000000] [mem 0x400000000-0x437ffffff] page 2M |
| 58 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] |
| 59 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 60 | [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M |
| 61 | [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] |
| 62 | [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M |
| 63 | [ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfecffff] |
| 64 | [ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M |
| 65 | [ 0.000000] [mem 0xbfe00000-0xbfecffff] page 4k |
| 66 | [ 0.000000] BRK [0x01ab3000, 0x01ab3fff] PGTABLE |
| 67 | [ 0.000000] BRK [0x01ab4000, 0x01ab4fff] PGTABLE |
| 68 | [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] |
| 69 | [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M |
| 70 | [ 0.000000] RAMDISK: [mem 0x360be000-0x37056fff] |
| 71 | [ 0.000000] ACPI: RSDP 00000000000f0000 000024 (v02 CORE ) |
| 72 | [ 0.000000] ACPI: XSDT 00000000bfee10e0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 73 | [ 0.000000] ACPI: FACP 00000000bfee48c0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001) |
| 74 | [ 0.000000] ACPI: DSDT 00000000bfee1250 00366E (v02 COREv4 COREBOOT 20110725 INTL 20140724) |
| 75 | [ 0.000000] ACPI: FACS 00000000bfee1210 000040 |
| 76 | [ 0.000000] ACPI: HPET 00000000bfee49c0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 77 | [ 0.000000] ACPI: APIC 00000000bfee4a00 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 78 | [ 0.000000] ACPI: MCFG 00000000bfee4a70 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 79 | [ 0.000000] ACPI: SSDT 00000000bfee5ab0 00122C (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 80 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 81 | [ 0.000000] No NUMA configuration found |
| 82 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff] |
| 83 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43b5fffff] |
| 84 | [ 0.000000] NODE_DATA [mem 0x43b5ee000-0x43b5f2fff] |
| 85 | [ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042ac00000-ffff880438bfffff] on node 0 |
| 86 | [ 0.000000] Zone ranges: |
| 87 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 88 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 89 | [ 0.000000] Normal [mem 0x100000000-0x43b5fffff] |
| 90 | [ 0.000000] Movable zone start for each node |
| 91 | [ 0.000000] Early memory node ranges |
| 92 | [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] |
| 93 | [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] |
| 94 | [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] |
| 95 | [ 0.000000] node 0: [mem 0x40200000-0xbfecffff] |
| 96 | [ 0.000000] node 0: [mem 0x100000000-0x43b5fffff] |
| 97 | [ 0.000000] On node 0 totalpages: 4173935 |
| 98 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 99 | [ 0.000000] DMA zone: 159 pages reserved |
| 100 | [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| 101 | [ 0.000000] DMA32 zone: 10678 pages used for memmap |
| 102 | [ 0.000000] DMA32 zone: 781008 pages, LIFO batch:31 |
| 103 | [ 0.000000] Normal zone: 46333 pages used for memmap |
| 104 | [ 0.000000] Normal zone: 3388928 pages, LIFO batch:31 |
| 105 | [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| 106 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 107 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 108 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| 109 | [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| 110 | [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| 111 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 112 | [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| 113 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 114 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 115 | [ 0.000000] ACPI: IRQ0 used by override. |
| 116 | [ 0.000000] ACPI: IRQ2 used by override. |
| 117 | [ 0.000000] ACPI: IRQ9 used by override. |
| 118 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 119 | [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| 120 | [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| 121 | [ 0.000000] nr_irqs_gsi: 40 |
| 122 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| 123 | [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| 124 | [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] |
| 125 | [ 0.000000] PM: Registered nosave memory: [mem 0xbfed0000-0xbfffffff] |
| 126 | [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff] |
| 127 | [ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff] |
| 128 | [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| 129 | [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff] |
| 130 | [ 0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices |
| 131 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 132 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| 133 | [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043b200000 s86080 r8192 d24512 u524288 |
| 134 | [ 0.000000] pcpu-alloc: s86080 r8192 d24512 u524288 alloc=1*2097152 |
| 135 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| 136 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116709 |
| 137 | [ 0.000000] Policy zone: Normal |
| 138 | [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet |
| 139 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 140 | [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 |
| 141 | [ 0.000000] Checking aperture... |
| 142 | [ 0.000000] No AGP bridge found |
| 143 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 144 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 145 | [ 0.000000] Memory: 16371948K/16695740K available (4957K kernel code, 747K rwdata, 1724K rodata, 1008K init, 960K bss, 323792K reserved) |
| 146 | [ 0.000000] Hierarchical RCU implementation. |
| 147 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 148 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| 149 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| 150 | [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 |
| 151 | [ 0.000000] Console: colour dummy device 80x25 |
| 152 | [ 0.000000] console [tty0] enabled |
| 153 | [ 0.000000] hpet clockevent registered |
| 154 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 155 | [ 0.000000] tsc: Detected 2491.824 MHz processor |
| 156 | [ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4983.64 BogoMIPS (lpj=9967296) |
| 157 | [ 0.000032] pid_max: default: 32768 minimum: 301 |
| 158 | [ 0.000038] ACPI: Core revision 20131218 |
| 159 | [ 0.001976] ACPI: All ACPI Tables successfully acquired |
| 160 | [ 0.002087] Security Framework initialized |
| 161 | [ 0.002094] AppArmor: AppArmor disabled by boot time parameter |
| 162 | [ 0.002095] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 163 | [ 0.002975] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| 164 | [ 0.006118] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| 165 | [ 0.007478] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| 166 | [ 0.007495] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| 167 | [ 0.007696] Initializing cgroup subsys memory |
| 168 | [ 0.007700] Initializing cgroup subsys devices |
| 169 | [ 0.007701] Initializing cgroup subsys freezer |
| 170 | [ 0.007703] Initializing cgroup subsys net_cls |
| 171 | [ 0.007704] Initializing cgroup subsys blkio |
| 172 | [ 0.007705] Initializing cgroup subsys perf_event |
| 173 | [ 0.007726] CPU: Physical Processor ID: 0 |
| 174 | [ 0.007727] CPU: Processor Core ID: 0 |
| 175 | [ 0.007732] mce: CPU supports 7 MCE banks |
| 176 | [ 0.007743] CPU0: Thermal monitoring enabled (TM1) |
| 177 | [ 0.007751] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| 178 | [ 0.007751] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| 179 | [ 0.007751] tlb_flushall_shift: 6 |
| 180 | [ 0.007838] Freeing SMP alternatives memory: 20K (ffffffff819b8000 - ffffffff819bd000) |
| 181 | [ 0.009657] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 182 | [ 0.049346] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07) |
| 183 | [ 0.049354] TSC deadline timer enabled |
| 184 | [ 0.049361] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. |
| 185 | [ 0.049368] ... version: 3 |
| 186 | [ 0.049369] ... bit width: 48 |
| 187 | [ 0.049370] ... generic registers: 4 |
| 188 | [ 0.049371] ... value mask: 0000ffffffffffff |
| 189 | [ 0.049372] ... max period: 0000ffffffffffff |
| 190 | [ 0.049373] ... fixed-purpose events: 3 |
| 191 | [ 0.049373] ... event mask: 000000070000000f |
| 192 | [ 0.049841] x86: Booting SMP configuration: |
| 193 | [ 0.049843] .... node #0, CPUs: #1 |
| 194 | [ 0.063045] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 195 | [ 0.063135] #2 #3 |
| 196 | [ 0.089523] x86: Booted up 1 node, 4 CPUs |
| 197 | [ 0.089527] smpboot: Total of 4 processors activated (19934.59 BogoMIPS) |
| 198 | [ 0.092566] devtmpfs: initialized |
| 199 | [ 0.096410] pinctrl core: initialized pinctrl subsystem |
| 200 | [ 0.096465] NET: Registered protocol family 16 |
| 201 | [ 0.096551] cpuidle: using governor ladder |
| 202 | [ 0.096552] cpuidle: using governor menu |
| 203 | [ 0.096578] ACPI: bus type PCI registered |
| 204 | [ 0.096580] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 205 | [ 0.096654] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| 206 | [ 0.096657] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| 207 | [ 0.096735] PCI: Using configuration type 1 for base access |
| 208 | [ 0.097671] bio: create slab <bio-0> at 0 |
| 209 | [ 0.097778] ACPI: Added _OSI(Module Device) |
| 210 | [ 0.097779] ACPI: Added _OSI(Processor Device) |
| 211 | [ 0.097780] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 212 | [ 0.097782] ACPI: Added _OSI(Processor Aggregator Device) |
| 213 | [ 0.100424] ACPI: Interpreter enabled |
| 214 | [ 0.100429] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) |
| 215 | [ 0.100433] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) |
| 216 | [ 0.100444] ACPI: (supports S0 S3 S4 S5) |
| 217 | [ 0.100445] ACPI: Using IOAPIC for interrupt routing |
| 218 | [ 0.100467] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 219 | [ 0.100562] ACPI: No dock devices found. |
| 220 | [ 0.105604] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 221 | [ 0.105609] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 222 | [ 0.105653] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 223 | [ 0.105742] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| 224 | [ 0.105888] PCI host bridge to bus 0000:00 |
| 225 | [ 0.105891] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 226 | [ 0.105892] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 227 | [ 0.105894] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| 228 | [ 0.105896] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 229 | [ 0.105897] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] |
| 230 | [ 0.105900] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] |
| 231 | [ 0.105901] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] |
| 232 | [ 0.105903] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] |
| 233 | [ 0.105905] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] |
| 234 | [ 0.105906] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] |
| 235 | [ 0.105907] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] |
| 236 | [ 0.105909] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] |
| 237 | [ 0.105910] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] |
| 238 | [ 0.105912] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] |
| 239 | [ 0.105913] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] |
| 240 | [ 0.105915] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] |
| 241 | [ 0.105916] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] |
| 242 | [ 0.105918] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xfebfffff] |
| 243 | [ 0.105919] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] |
| 244 | [ 0.105927] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 |
| 245 | [ 0.106006] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 |
| 246 | [ 0.106017] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] |
| 247 | [ 0.106023] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| 248 | [ 0.106027] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f] |
| 249 | [ 0.106122] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 |
| 250 | [ 0.106145] pci 0000:00:16.0: reg 0x10: [mem 0xe0626100-0xe062610f 64bit] |
| 251 | [ 0.106221] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| 252 | [ 0.106299] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| 253 | [ 0.106317] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff] |
| 254 | [ 0.106326] pci 0000:00:19.0: reg 0x14: [mem 0xe0624000-0xe0624fff] |
| 255 | [ 0.106335] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f] |
| 256 | [ 0.106398] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| 257 | [ 0.106469] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| 258 | [ 0.106491] pci 0000:00:1a.0: reg 0x10: [mem 0xe0625800-0xe0625bff] |
| 259 | [ 0.106579] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| 260 | [ 0.106615] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| 261 | [ 0.106660] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| 262 | [ 0.106677] pci 0000:00:1b.0: reg 0x10: [mem 0xe0620000-0xe0623fff 64bit] |
| 263 | [ 0.106751] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| 264 | [ 0.106785] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| 265 | [ 0.106831] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 |
| 266 | [ 0.106950] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| 267 | [ 0.107038] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 |
| 268 | [ 0.107170] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| 269 | [ 0.107258] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 |
| 270 | [ 0.107379] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| 271 | [ 0.107462] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 |
| 272 | [ 0.107591] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| 273 | [ 0.107678] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| 274 | [ 0.107700] pci 0000:00:1d.0: reg 0x10: [mem 0xe0625c00-0xe0625fff] |
| 275 | [ 0.107789] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| 276 | [ 0.107823] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| 277 | [ 0.107866] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 |
| 278 | [ 0.108033] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 |
| 279 | [ 0.108052] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887] |
| 280 | [ 0.108061] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893] |
| 281 | [ 0.108070] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f] |
| 282 | [ 0.108079] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897] |
| 283 | [ 0.108088] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f] |
| 284 | [ 0.108096] pci 0000:00:1f.2: reg 0x24: [mem 0xe0625000-0xe06257ff] |
| 285 | [ 0.108145] pci 0000:00:1f.2: PME# supported from D3hot |
| 286 | [ 0.108213] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 |
| 287 | [ 0.108229] pci 0000:00:1f.3: reg 0x10: [mem 0xe0626000-0xe06260ff 64bit] |
| 288 | [ 0.108250] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| 289 | [ 0.108405] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 290 | [ 0.108663] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000 |
| 291 | [ 0.108829] pci 0000:02:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit] |
| 292 | [ 0.109600] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold |
| 293 | [ 0.117684] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 294 | [ 0.117693] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] |
| 295 | [ 0.117787] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| 296 | [ 0.117926] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501 |
| 297 | [ 0.117953] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz. |
| 298 | [ 0.117973] pci 0000:04:00.0: proprietary Ricoh MMC controller disabled (via firewire function) |
| 299 | [ 0.117974] pci 0000:04:00.0: MMC cards are now supported by standard SDHCI controller |
| 300 | [ 0.118014] pci 0000:04:00.0: reg 0x10: [mem 0xe0500000-0xe05000ff] |
| 301 | [ 0.118317] pci 0000:04:00.0: supports D1 D2 |
| 302 | [ 0.118318] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 303 | [ 0.118445] pci 0000:04:00.1: [1180:e232] type 00 class 0x088000 |
| 304 | [ 0.118484] pci 0000:04:00.1: reg 0x10: [mem 0xe0500100-0xe05001ff] |
| 305 | [ 0.118768] pci 0000:04:00.1: supports D1 D2 |
| 306 | [ 0.118769] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold |
| 307 | [ 0.125586] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| 308 | [ 0.125601] pci 0000:00:1c.4: bridge window [mem 0xe0500000-0xe05fffff] |
| 309 | [ 0.125773] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. |
| 310 | [ 0.125817] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled. |
| 311 | [ 0.125859] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. |
| 312 | [ 0.125899] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled. |
| 313 | [ 0.125941] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. |
| 314 | [ 0.125981] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. |
| 315 | [ 0.126021] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. |
| 316 | [ 0.126061] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. |
| 317 | [ 0.126463] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 |
| 318 | [ 0.126540] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| 319 | [ 0.126543] vgaarb: loaded |
| 320 | [ 0.126544] vgaarb: bridge control possible 0000:00:02.0 |
| 321 | [ 0.126580] PCI: Using ACPI for IRQ routing |
| 322 | [ 0.128030] PCI: pci_cache_line_size set to 64 bytes |
| 323 | [ 0.128150] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff] |
| 324 | [ 0.128152] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff] |
| 325 | [ 0.128257] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| 326 | [ 0.128261] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| 327 | [ 0.131286] Switched to clocksource hpet |
| 328 | [ 0.133005] pnp: PnP ACPI init |
| 329 | [ 0.133020] ACPI: bus type PNP registered |
| 330 | [ 0.133085] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| 331 | [ 0.133087] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| 332 | [ 0.133089] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| 333 | [ 0.133090] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| 334 | [ 0.133092] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| 335 | [ 0.133094] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| 336 | [ 0.133096] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| 337 | [ 0.133098] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| 338 | [ 0.133099] system 00:00: [mem 0x20000000-0x201fffff] has been reserved |
| 339 | [ 0.133101] system 00:00: [mem 0x40000000-0x401fffff] has been reserved |
| 340 | [ 0.133104] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 341 | [ 0.133576] pnp 00:01: [dma 4] |
| 342 | [ 0.133601] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) |
| 343 | [ 0.133625] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) |
| 344 | [ 0.133709] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved |
| 345 | [ 0.133711] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| 346 | [ 0.133746] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) |
| 347 | [ 0.133782] system 00:05: [io 0x0500-0x057f] could not be reserved |
| 348 | [ 0.133784] system 00:05: [io 0x0480-0x04bf] has been reserved |
| 349 | [ 0.133786] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 350 | [ 0.133810] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 351 | [ 0.133847] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 352 | [ 0.133879] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 353 | [ 0.133890] pnp: PnP ACPI: found 9 devices |
| 354 | [ 0.133891] ACPI: bus type PNP unregistered |
| 355 | [ 0.140362] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 |
| 356 | [ 0.140365] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 |
| 357 | [ 0.140367] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 |
| 358 | [ 0.140383] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 |
| 359 | [ 0.140385] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 |
| 360 | [ 0.140387] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 |
| 361 | [ 0.140394] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc2a00000-0xc2bfffff] |
| 362 | [ 0.140401] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc2c00000-0xc2dfffff 64bit pref] |
| 363 | [ 0.140404] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff] |
| 364 | [ 0.140406] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 365 | [ 0.140424] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 366 | [ 0.140431] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] |
| 367 | [ 0.140443] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| 368 | [ 0.140446] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| 369 | [ 0.140453] pci 0000:00:1c.3: bridge window [mem 0xc2a00000-0xc2bfffff] |
| 370 | [ 0.140458] pci 0000:00:1c.3: bridge window [mem 0xc2c00000-0xc2dfffff 64bit pref] |
| 371 | [ 0.140466] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| 372 | [ 0.140473] pci 0000:00:1c.4: bridge window [mem 0xe0500000-0xe05fffff] |
| 373 | [ 0.140486] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 374 | [ 0.140487] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 375 | [ 0.140489] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 376 | [ 0.140490] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] |
| 377 | [ 0.140492] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] |
| 378 | [ 0.140493] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] |
| 379 | [ 0.140495] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] |
| 380 | [ 0.140496] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] |
| 381 | [ 0.140498] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] |
| 382 | [ 0.140499] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] |
| 383 | [ 0.140500] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] |
| 384 | [ 0.140502] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff] |
| 385 | [ 0.140503] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff] |
| 386 | [ 0.140505] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff] |
| 387 | [ 0.140506] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff] |
| 388 | [ 0.140508] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff] |
| 389 | [ 0.140509] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xfebfffff] |
| 390 | [ 0.140511] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff] |
| 391 | [ 0.140512] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff] |
| 392 | [ 0.140514] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| 393 | [ 0.140516] pci_bus 0000:03: resource 1 [mem 0xc2a00000-0xc2bfffff] |
| 394 | [ 0.140517] pci_bus 0000:03: resource 2 [mem 0xc2c00000-0xc2dfffff 64bit pref] |
| 395 | [ 0.140519] pci_bus 0000:04: resource 1 [mem 0xe0500000-0xe05fffff] |
| 396 | [ 0.140573] NET: Registered protocol family 2 |
| 397 | [ 0.140771] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| 398 | [ 0.141015] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 399 | [ 0.141136] TCP: Hash tables configured (established 131072 bind 65536) |
| 400 | [ 0.141159] TCP: reno registered |
| 401 | [ 0.141177] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| 402 | [ 0.141234] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| 403 | [ 0.141342] NET: Registered protocol family 1 |
| 404 | [ 0.141355] pci 0000:00:02.0: Boot video device |
| 405 | [ 0.141673] PCI: CLS 64 bytes, default 64 |
| 406 | [ 0.141718] Unpacking initramfs... |
| 407 | [ 0.414270] Freeing initrd memory: 15972K (ffff8800360be000 - ffff880037057000) |
| 408 | [ 0.414275] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 409 | [ 0.414277] software IO TLB [mem 0xbbed0000-0xbfed0000] (64MB) mapped at [ffff8800bbed0000-ffff8800bfecffff] |
| 410 | [ 0.414475] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer |
| 411 | [ 0.414516] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 |
| 412 | [ 0.414523] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 |
| 413 | [ 0.414532] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 |
| 414 | [ 0.414540] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 |
| 415 | [ 0.414604] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 416 | [ 0.414846] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| 417 | [ 0.414898] audit: initializing netlink subsys (disabled) |
| 418 | [ 0.414916] audit: type=2000 audit(1409419967.412:1): initialized |
| 419 | [ 0.427467] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 420 | [ 0.427649] VFS: Disk quotas dquot_6.5.2 |
| 421 | [ 0.427670] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 422 | [ 0.427719] msgmni has been set to 32007 |
| 423 | [ 0.427933] alg: No test for stdrng (krng) |
| 424 | [ 0.427957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 425 | [ 0.427992] io scheduler noop registered |
| 426 | [ 0.427993] io scheduler deadline registered |
| 427 | [ 0.428011] io scheduler cfq registered (default) |
| 428 | [ 0.428180] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X |
| 429 | [ 0.428353] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X |
| 430 | [ 0.428444] pcieport 0000:00:1c.3: enabling device (0104 -> 0107) |
| 431 | [ 0.428480] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X |
| 432 | [ 0.428606] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X |
| 433 | [ 0.428725] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| 434 | [ 0.428731] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded |
| 435 | [ 0.428754] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| 436 | [ 0.428756] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| 437 | [ 0.428761] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded |
| 438 | [ 0.428783] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt |
| 439 | [ 0.428788] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded |
| 440 | [ 0.428810] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt |
| 441 | [ 0.428812] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt |
| 442 | [ 0.428814] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt |
| 443 | [ 0.428819] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded |
| 444 | [ 0.428830] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 445 | [ 0.428874] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ |
| 446 | [ 0.428906] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded |
| 447 | [ 0.428911] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 448 | [ 0.428956] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x408000 bytes, mapped to 0xffffc90005b80000 |
| 449 | [ 0.428958] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1376x768x32, linelength=5504 |
| 450 | [ 0.431307] Console: switching to colour frame buffer device 172x48 |
| 451 | [ 0.433588] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! |
| 452 | [ 0.433595] intel_idle: MWAIT substates: 0x21120 |
| 453 | [ 0.433596] intel_idle: v0.4 model 0x2A |
| 454 | [ 0.433597] intel_idle: lapic_timer_reliable_states 0xffffffff |
| 455 | [ 0.433764] GHES: HEST is not enabled! |
| 456 | [ 0.433818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 457 | [ 0.434220] Linux agpgart interface v0.103 |
| 458 | [ 0.434309] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 459 | [ 0.443492] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 460 | [ 0.443497] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 461 | [ 0.443618] mousedev: PS/2 mouse device common for all mice |
| 462 | [ 0.443659] rtc_cmos 00:06: RTC can wake from S4 |
| 463 | [ 0.443784] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 |
| 464 | [ 0.443812] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs |
| 465 | [ 0.443820] Intel P-state driver initializing. |
| 466 | [ 0.443829] Intel pstate controlling: cpu 0 |
| 467 | [ 0.443847] Intel pstate controlling: cpu 1 |
| 468 | [ 0.443864] Intel pstate controlling: cpu 2 |
| 469 | [ 0.443878] Intel pstate controlling: cpu 3 |
| 470 | [ 0.443899] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| 471 | [ 0.443900] AMD IOMMUv2 functionality not available on this system |
| 472 | [ 0.443986] TCP: cubic registered |
| 473 | [ 0.444049] NET: Registered protocol family 10 |
| 474 | [ 0.444257] mip6: Mobile IPv6 |
| 475 | [ 0.444259] NET: Registered protocol family 17 |
| 476 | [ 0.444262] mpls_gso: MPLS GSO support |
| 477 | [ 0.444517] registered taskstats version 1 |
| 478 | [ 0.445010] rtc_cmos 00:06: setting system clock to 2014-08-30 17:32:47 UTC (1409419967) |
| 479 | [ 0.445060] PM: Hibernation image not present or could not be loaded. |
| 480 | [ 0.445598] Freeing unused kernel memory: 1008K (ffffffff818bc000 - ffffffff819b8000) |
| 481 | [ 0.445599] Write protecting the kernel read-only data: 8192k |
| 482 | [ 0.452054] Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000) |
| 483 | [ 0.452924] Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000) |
| 484 | [ 0.454998] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 485 | [ 0.510965] systemd-udevd[71]: starting version 208 |
| 486 | [ 0.511267] random: systemd-udevd urandom read with 1 bits of entropy available |
| 487 | [ 0.522021] pps_core: LinuxPPS API ver. 1 registered |
| 488 | [ 0.522024] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| 489 | [ 0.522211] PTP clock support registered |
| 490 | [ 0.522780] thermal LNXTHERM:00: registered as thermal_zone0 |
| 491 | [ 0.522784] ACPI: Thermal Zone [THM0] (57 C) |
| 492 | [ 0.522816] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| 493 | [ 0.522818] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. |
| 494 | [ 0.522898] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 495 | [ 0.522920] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X |
| 496 | [ 0.523589] thermal LNXTHERM:01: registered as thermal_zone1 |
| 497 | [ 0.523591] ACPI: Thermal Zone [THM1] (27 C) |
| 498 | [ 0.525081] ACPI: bus type USB registered |
| 499 | [ 0.525117] usbcore: registered new interface driver usbfs |
| 500 | [ 0.525131] usbcore: registered new interface driver hub |
| 501 | [ 0.525177] usbcore: registered new device driver usb |
| 502 | [ 0.525538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 503 | [ 0.525733] ehci-pci: EHCI PCI platform driver |
| 504 | [ 0.526171] sdhci: Secure Digital Host Controller Interface driver |
| 505 | [ 0.526174] sdhci: Copyright(c) Pierre Ossman |
| 506 | [ 0.526364] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4) |
| 507 | [ 0.526663] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA |
| 508 | [ 0.528451] SCSI subsystem initialized |
| 509 | [ 0.529557] libata version 3.00 loaded. |
| 510 | [ 0.724004] e1000e 0000:00:19.0 eth0: registered PHC clock |
| 511 | [ 0.724015] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:71:a0:9c |
| 512 | [ 0.724021] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| 513 | [ 0.724066] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| 514 | [ 0.724246] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| 515 | [ 0.724253] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| 516 | [ 0.724277] ehci-pci 0000:00:1a.0: debug port 2 |
| 517 | [ 0.728194] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| 518 | [ 0.728234] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0625800 |
| 519 | [ 0.739509] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| 520 | [ 0.739652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 521 | [ 0.739658] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 522 | [ 0.739662] usb usb1: Product: EHCI Host Controller |
| 523 | [ 0.739666] usb usb1: Manufacturer: Linux 3.14-2-amd64 ehci_hcd |
| 524 | [ 0.739670] usb usb1: SerialNumber: 0000:00:1a.0 |
| 525 | [ 0.740222] hub 1-0:1.0: USB hub found |
| 526 | [ 0.740239] hub 1-0:1.0: 3 ports detected |
| 527 | [ 0.740728] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| 528 | [ 0.740742] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| 529 | [ 0.740770] ehci-pci 0000:00:1d.0: debug port 2 |
| 530 | [ 0.744703] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| 531 | [ 0.744740] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0625c00 |
| 532 | [ 0.755518] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| 533 | [ 0.755663] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| 534 | [ 0.755669] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 535 | [ 0.755673] usb usb2: Product: EHCI Host Controller |
| 536 | [ 0.755676] usb usb2: Manufacturer: Linux 3.14-2-amd64 ehci_hcd |
| 537 | [ 0.755680] usb usb2: SerialNumber: 0000:00:1d.0 |
| 538 | [ 0.756142] hub 2-0:1.0: USB hub found |
| 539 | [ 0.756159] hub 2-0:1.0: 3 ports detected |
| 540 | [ 0.756481] ahci 0000:00:1f.2: version 3.0 |
| 541 | [ 0.756916] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X |
| 542 | [ 0.756968] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| 543 | [ 0.771573] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| 544 | [ 0.771586] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| 545 | [ 0.772535] scsi0 : ahci |
| 546 | [ 0.772654] scsi1 : ahci |
| 547 | [ 0.772744] scsi2 : ahci |
| 548 | [ 0.772836] scsi3 : ahci |
| 549 | [ 0.772924] scsi4 : ahci |
| 550 | [ 0.773011] scsi5 : ahci |
| 551 | [ 0.773051] ata1: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625100 irq 45 |
| 552 | [ 0.773054] ata2: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625180 irq 45 |
| 553 | [ 0.773055] ata3: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625200 irq 45 |
| 554 | [ 0.773056] ata4: DUMMY |
| 555 | [ 0.773057] ata5: DUMMY |
| 556 | [ 0.773058] ata6: DUMMY |
| 557 | [ 1.051593] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| 558 | [ 1.091588] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 559 | [ 1.092010] ata1.00: supports DRM functions and may not be fully accessible |
| 560 | [ 1.092318] ata1.00: disabling queued TRIM support |
| 561 | [ 1.092328] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133 |
| 562 | [ 1.092333] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| 563 | [ 1.093350] ata1.00: supports DRM functions and may not be fully accessible |
| 564 | [ 1.093635] ata1.00: disabling queued TRIM support |
| 565 | [ 1.094265] ata1.00: configured for UDMA/133 |
| 566 | [ 1.094718] scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5 |
| 567 | [ 1.184134] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| 568 | [ 1.184143] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 569 | [ 1.184769] hub 1-1:1.0: USB hub found |
| 570 | [ 1.184866] hub 1-1:1.0: 6 ports detected |
| 571 | [ 1.295635] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| 572 | [ 1.411617] tsc: Refined TSC clocksource calibration: 2491.910 MHz |
| 573 | [ 1.411632] ata2: SATA link down (SStatus 0 SControl 300) |
| 574 | [ 1.428173] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| 575 | [ 1.428182] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 576 | [ 1.428797] hub 2-1:1.0: USB hub found |
| 577 | [ 1.428926] hub 2-1:1.0: 8 ports detected |
| 578 | [ 1.499890] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| 579 | [ 1.593080] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 |
| 580 | [ 1.593089] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 581 | [ 1.593094] usb 1-1.3: Product: Biometric Coprocessor |
| 582 | [ 1.593097] usb 1-1.3: Manufacturer: UPEK |
| 583 | [ 1.663901] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| 584 | [ 1.739693] ata3: SATA link down (SStatus 0 SControl 300) |
| 585 | [ 1.746446] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB) |
| 586 | [ 1.746460] sd 0:0:0:0: [sda] 4096-byte physical blocks |
| 587 | [ 1.746595] sd 0:0:0:0: [sda] Write Protect is off |
| 588 | [ 1.746603] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 589 | [ 1.746647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 590 | [ 1.748800] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 |
| 591 | [ 1.749949] sd 0:0:0:0: [sda] Attached SCSI disk |
| 592 | [ 1.750979] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 593 | [ 1.760385] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f |
| 594 | [ 1.760393] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 595 | [ 1.760397] usb 1-1.4: Product: Broadcom Bluetooth Device |
| 596 | [ 1.760400] usb 1-1.4: Manufacturer: Broadcom Corp |
| 597 | [ 1.760403] usb 1-1.4: SerialNumber: EC55F9F085ED |
| 598 | [ 1.816171] device-mapper: uevent: version 1.0.3 |
| 599 | [ 1.816267] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com |
| 600 | [ 1.831751] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| 601 | [ 1.891592] raid6: sse2x1 6135 MB/s |
| 602 | [ 1.930141] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217 |
| 603 | [ 1.930151] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 604 | [ 1.930153] usb 1-1.6: Product: Integrated Camera |
| 605 | [ 1.930154] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| 606 | [ 1.959600] raid6: sse2x2 9359 MB/s |
| 607 | [ 1.999773] usb 2-1.5: new full-speed USB device number 3 using ehci-pci |
| 608 | [ 2.027615] raid6: sse2x4 12268 MB/s |
| 609 | [ 2.027617] raid6: using algorithm sse2x4 (12268 MB/s) |
| 610 | [ 2.027618] raid6: using ssse3x2 recovery algorithm |
| 611 | [ 2.027822] xor: automatically using best checksumming function: |
| 612 | [ 2.067617] avx : 24514.000 MB/sec |
| 613 | [ 2.071000] bio: create slab <bio-1> at 1 |
| 614 | [ 2.071145] Btrfs loaded |
| 615 | [ 2.094033] usb 2-1.5: New USB device found, idVendor=056a, idProduct=0090 |
| 616 | [ 2.094036] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 617 | [ 2.094038] usb 2-1.5: Product: ISD-V4 |
| 618 | [ 2.094039] usb 2-1.5: Manufacturer: Tablet |
| 619 | [ 2.095002] hidraw: raw HID events driver (C) Jiri Kosina |
| 620 | [ 2.095347] usbcore: registered new interface driver usbhid |
| 621 | [ 2.095349] usbhid: USB HID core driver |
| 622 | [ 2.134516] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled |
| 623 | [ 2.136013] XFS (sda4): Mounting Filesystem |
| 624 | [ 2.154115] XFS (sda4): Ending clean mount |
| 625 | [ 2.234497] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) |
| 626 | [ 2.253248] systemd[1]: Inserted module 'autofs4' |
| 627 | [ 2.253801] systemd[1]: Set hostname to <debian>. |
| 628 | [ 2.411846] Switched to clocksource tsc |
| 629 | [ 2.455807] systemd[1]: [/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue 'RemoveOnStop' in section 'Socket' |
| 630 | [ 2.507256] systemd[1]: Starting Syslog Socket. |
| 631 | [ 2.507346] systemd[1]: Listening on Syslog Socket. |
| 632 | [ 2.507373] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| 633 | [ 2.507486] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 634 | [ 2.507509] systemd[1]: Starting Remote File Systems (Pre). |
| 635 | [ 2.507530] systemd[1]: Reached target Remote File Systems (Pre). |
| 636 | [ 2.507549] systemd[1]: Starting Delayed Shutdown Socket. |
| 637 | [ 2.507588] systemd[1]: Listening on Delayed Shutdown Socket. |
| 638 | [ 2.507605] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| 639 | [ 2.507647] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 640 | [ 2.507673] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| 641 | [ 2.507761] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 642 | [ 2.507819] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| 643 | [ 2.507979] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 644 | [ 2.508005] systemd[1]: Starting Journal Socket. |
| 645 | [ 2.508077] systemd[1]: Listening on Journal Socket. |
| 646 | [ 2.508105] systemd[1]: Starting Syslog. |
| 647 | [ 2.508123] systemd[1]: Reached target Syslog. |
| 648 | [ 2.509393] systemd[1]: Starting Load Kernel Modules... |
| 649 | [ 2.510363] systemd[1]: Mounting Debug File System... |
| 650 | [ 2.512112] systemd[1]: Started Set Up Additional Binary Formats. |
| 651 | [ 2.512192] systemd[1]: Mounting Huge Pages File System... |
| 652 | [ 2.512919] systemd[1]: Mounting POSIX Message Queue File System... |
| 653 | [ 2.514559] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 654 | [ 2.515406] systemd[1]: Starting Journal Service... |
| 655 | [ 2.516350] systemd[1]: Started Journal Service. |
| 656 | [ 2.526212] lp: driver loaded but no devices found |
| 657 | [ 2.555287] ppdev: user-space parallel port driver |
| 658 | [ 2.558565] fuse init (API version 7.22) |
| 659 | [ 2.560728] loop: module loaded |
| 660 | [ 2.577023] systemd-udevd[210]: starting version 208 |
| 661 | [ 2.666293] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input2 |
| 662 | [ 2.666298] ACPI: Sleep Button [SLPB] |
| 663 | [ 2.666344] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input3 |
| 664 | [ 2.666543] ACPI: Lid Switch [LID] |
| 665 | [ 2.666598] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| 666 | [ 2.666601] ACPI: Power Button [PWRF] |
| 667 | [ 2.666605] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X |
| 668 | [ 2.667137] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| 669 | [ 2.674508] [drm] Initialized drm 1.1.0 20060810 |
| 670 | [ 2.680586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 671 | [ 2.680705] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20131218/utaddress-258) |
| 672 | [ 2.680711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 673 | [ 2.680715] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258) |
| 674 | [ 2.680718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 675 | [ 2.680719] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258) |
| 676 | [ 2.680723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 677 | [ 2.680724] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258) |
| 678 | [ 2.680727] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 679 | [ 2.680728] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| 680 | [ 2.681739] Non-volatile memory driver v1.3 |
| 681 | [ 2.683835] systemd-udevd[261]: renamed network interface eth0 to eth1 |
| 682 | [ 2.693227] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X |
| 683 | [ 2.694894] cfg80211: Calling CRDA to update world regulatory domain |
| 684 | [ 2.695101] input: PC Speaker as /devices/platform/pcspkr/input/input5 |
| 685 | [ 2.698883] Intel(R) Wireless WiFi driver for Linux, in-tree: |
| 686 | [ 2.698887] Copyright(c) 2003- 2014 Intel Corporation |
| 687 | [ 2.708126] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt |
| 688 | [ 2.714376] hda_codec: CX20590: BIOS auto-probing. |
| 689 | [ 2.715913] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 |
| 690 | [ 2.716428] AVX version of gcm_enc/dec engaged. |
| 691 | [ 2.723744] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) |
| 692 | [ 2.738168] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X |
| 693 | [ 2.741804] input: Wacom ISDv4 90 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8 |
| 694 | [ 2.742115] alg: No test for crc32 (crc32-pclmul) |
| 695 | [ 2.742546] usbcore: registered new interface driver wacom |
| 696 | [ 2.743706] Bluetooth: Core ver 2.18 |
| 697 | [ 2.743722] NET: Registered protocol family 31 |
| 698 | [ 2.743723] Bluetooth: HCI device and connection manager initialized |
| 699 | [ 2.743741] Bluetooth: HCI socket layer initialized |
| 700 | [ 2.743744] Bluetooth: L2CAP socket layer initialized |
| 701 | [ 2.743754] Bluetooth: SCO socket layer initialized |
| 702 | [ 2.747889] media: Linux media interface: v0.10 |
| 703 | [ 2.750893] Linux video capture interface: v2.00 |
| 704 | [ 2.751175] usbcore: registered new interface driver btusb |
| 705 | [ 2.754319] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode |
| 706 | [ 2.754450] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm |
| 707 | [ 2.756876] acpi device:07: registered as cooling_device4 |
| 708 | [ 2.756969] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 |
| 709 | [ 2.757004] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| 710 | [ 2.757006] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| 711 | [ 2.757007] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-6835-g8603513, EC 8ZHT24WW-3.20 |
| 712 | [ 2.757008] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4299Y48 |
| 713 | [ 2.757548] thinkpad_acpi: detected a 8-level brightness capable ThinkPad |
| 714 | [ 2.757994] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| 715 | [ 2.757996] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| 716 | [ 2.758588] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217) |
| 717 | [ 2.768936] [drm] Memory usable by graphics device = 2048M |
| 718 | [ 2.768942] checking generic (d0000000 408000) vs hw (d0000000 10000000) |
| 719 | [ 2.768944] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver |
| 720 | [ 2.768968] Console: switching to colour dummy device 80x25 |
| 721 | [ 2.769533] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled |
| 722 | [ 2.769536] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled |
| 723 | [ 2.769546] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled |
| 724 | [ 2.769549] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 |
| 725 | [ 2.769631] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S |
| 726 | [ 2.769648] i915 0000:00:02.0: irq 49 for MSI/MSI-X |
| 727 | [ 2.769656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 728 | [ 2.769657] [drm] Driver supports precise vblank timestamp query. |
| 729 | [ 2.769836] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| 730 | [ 2.783508] ACPI: Battery Slot [BAT0] (battery present) |
| 731 | [ 2.783632] ACPI: Battery Slot [BAT1] (battery absent) |
| 732 | [ 2.784149] ACPI: AC Adapter [AC] (on-line) |
| 733 | [ 2.785743] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| 734 | [ 2.785914] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| 735 | [ 2.786875] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10 |
| 736 | [ 2.806290] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' |
| 737 | [ 2.809721] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| 738 | [ 2.809855] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| 739 | [ 2.810016] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| 740 | [ 2.810152] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| 741 | [ 2.810290] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| 742 | [ 2.810362] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| 743 | [ 2.810686] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| 744 | [ 2.823872] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18 |
| 745 | [ 2.823960] usbcore: registered new interface driver uvcvideo |
| 746 | [ 2.823962] USB Video Class driver (1.1.1) |
| 747 | [ 2.834909] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| 748 | [ 2.839051] iTCO_vendor_support: vendor-support=0 |
| 749 | [ 2.839706] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 |
| 750 | [ 2.839740] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560) |
| 751 | [ 2.840029] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 752 | [ 2.847030] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| 753 | [ 2.850381] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| 754 | [ 2.851646] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| 755 | [ 2.860347] systemd-udevd[252]: renamed network interface wlan0 to wlan1 |
| 756 | [ 2.862865] cfg80211: World regulatory domain updated: |
| 757 | [ 2.862869] cfg80211: DFS Master region: unset |
| 758 | [ 2.862870] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) |
| 759 | [ 2.862873] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) |
| 760 | [ 2.862874] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) |
| 761 | [ 2.862876] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) |
| 762 | [ 2.862878] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) |
| 763 | [ 2.862879] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) |
| 764 | [ 2.862881] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) |
| 765 | [ 2.903784] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 |
| 766 | [ 2.921349] fbcon: inteldrmfb (fb0) is primary device |
| 767 | [ 3.608146] Console: switching to colour frame buffer device 170x48 |
| 768 | [ 3.614434] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| 769 | [ 3.614438] i915 0000:00:02.0: registered panic notifier |
| 770 | [ 3.614482] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 |
| 771 | [ 3.796528] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905 |
| 772 | [ 3.796552] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| 773 | [ 3.856454] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 |
| 774 | [ 4.162742] random: nonblocking pool is initialized |
| 775 | [ 4.816473] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off |
| 776 | [ 8.071206] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 |
| 777 | [ 9.880791] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| 778 | [ 10.191022] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19 |
| 779 | [ 13.363770] NET: Registered protocol family 38 |
| 780 | [ 13.417202] bio: create slab <bio-2> at 2 |
| 781 | [ 13.472190] XFS (dm-0): Mounting Filesystem |
| 782 | [ 13.497584] XFS (dm-0): Ending clean mount |
| 783 | [ 13.505557] systemd-journald[185]: Received request to flush runtime journal from PID 1 |
| 784 | [ 13.870574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 785 | [ 13.870578] Bluetooth: BNEP filters: protocol multicast |
| 786 | [ 13.870586] Bluetooth: BNEP socket layer initialized |
| 787 | [ 15.782141] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X |
| 788 | [ 15.886029] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X |
| 789 | [ 15.886216] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready |
| 790 | [ 15.895711] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S |
| 791 | [ 15.895851] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| 792 | [ 16.161903] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S |
| 793 | [ 16.162057] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| 794 | [ 16.238473] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| 795 | [ 22.897897] wlan1: authenticate with 00:24:37:96:06:b0 |
| 796 | [ 22.901690] wlan1: send auth to 00:24:37:96:06:b0 (try 1/3) |
| 797 | [ 22.903461] wlan1: authenticated |
| 798 | [ 22.903585] iwlwifi 0000:02:00.0 wlan1: disabling HT as WMM/QoS is not supported by the AP |
| 799 | [ 22.903589] iwlwifi 0000:02:00.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP |
| 800 | [ 22.907314] wlan1: associate with 00:24:37:96:06:b0 (try 1/3) |
| 801 | [ 22.910255] wlan1: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=4) |
| 802 | [ 22.914071] wlan1: associated |
| 803 | [ 22.914122] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready |
| 804 | [ 29.116272] Bluetooth: RFCOMM TTY layer initialized |
| 805 | [ 29.116284] Bluetooth: RFCOMM socket layer initialized |
| 806 | [ 29.116290] Bluetooth: RFCOMM ver 1.11 |