Gitiles
Code Review Sign In
review.coreboot.org / board-status / d7a2c77f0918cc8b6cd0af48011c76f6ce06404f / . / emulation / qemu-q35 / 4.1-691-g0017b00 / 2015-10-08T15:54:17Z / kernel_log.txt
blob: c6d5b3fb4c6816bde1b1c170dd0f6cae517697b2 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand176ca262015-10-08 16:53:39 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9991-g4d6db95-dirty 06/13/2015
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff]
42[ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff]
44[ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f5f2000-0x1fe7bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000001FFBAED0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000001FFBAF10 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HPET 0x000000001FFBAF70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
66[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
67[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
68[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
69[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
70[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0
71[ 0.000000] Zone ranges:
72[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
73[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
74[ 0.000000] Normal empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
78[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
79[ 0.000000] On node 0 totalpages: 130878
80[ 0.000000] DMA zone: 56 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 1735 pages used for memmap
84[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
85[ 0.000000] ACPI: PM-Timer IO Port: 0x608
86[ 0.000000] ACPI: Local APIC address 0xfee00000
87[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
88[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
89[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ2 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
103[ 0.000000] Booting paravirtualized kernel on KVM
104[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152
106[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
107[ 0.000000] pcpu-alloc: [0] 0
108[ 0.000000] KVM setup async PF for cpu 0
109[ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080
110[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
111[ 0.000000] Policy zone: DMA32
112[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
113[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
114[ 0.000000] AGP: Checking aperture...
115[ 0.000000] AGP: No AGP bridge found
116[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
119[ 0.000000] Hierarchical RCU implementation.
120[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
121[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
122[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
123[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
124[ 0.000000] Console: colour VGA+ 80x25
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2311.846 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
129[ 0.008000] pid_max: default: 32768 minimum: 301
130[ 0.008000] ACPI: Core revision 20140424
131[ 0.008708] ACPI: All ACPI Tables successfully acquired
132[ 0.009565] Security Framework initialized
133[ 0.010196] AppArmor: AppArmor disabled by boot time parameter
134[ 0.011062] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.012082] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.013343] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.014490] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.015494] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.016264] Initializing cgroup subsys memory
140[ 0.016977] Initializing cgroup subsys devices
141[ 0.017702] Initializing cgroup subsys freezer
142[ 0.018423] Initializing cgroup subsys net_cls
143[ 0.019156] Initializing cgroup subsys blkio
144[ 0.020009] Initializing cgroup subsys perf_event
145[ 0.020763] Initializing cgroup subsys net_prio
146[ 0.021597] mce: CPU supports 10 MCE banks
147[ 0.022337] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
150[ 0.034480] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.040206] ftrace: allocating 21601 entries in 85 pages
152[ 0.053642] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.054540] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
154[ 0.056000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.056000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.056426] x86: Booted up 1 node, 1 CPUs
157[ 0.057047] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
158[ 0.058542] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.059664] devtmpfs: initialized
160[ 0.066574] pinctrl core: initialized pinctrl subsystem
161[ 0.067464] NET: Registered protocol family 16
162[ 0.068163] cpuidle: using governor ladder
163[ 0.068780] cpuidle: using governor menu
164[ 0.069519] ACPI: bus type PCI registered
165[ 0.070133] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.071240] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.072006] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.073496] PCI: Using configuration type 1 for base access
169[ 0.076215] ACPI: Added _OSI(Module Device)
170[ 0.076863] ACPI: Added _OSI(Processor Device)
171[ 0.077529] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.078231] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.082959] ACPI: Interpreter enabled
174[ 0.083536] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.084824] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.086248] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.087700] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.088827] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.090230] ACPI: (supports S0)
180[ 0.090710] ACPI: Using IOAPIC for interrupt routing
181[ 0.092025] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.096267] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.097306] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.098897] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.100119] PCI host bridge to bus 0000:00
186[ 0.100815] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.101736] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.102776] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.104003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.105042] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.106120] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.106572] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.109623] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.112006] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.126638] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.126859] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.132011] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.136009] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.150547] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.151011] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.151474] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.152030] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.153352] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.166374] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.169211] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.172188] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.172410] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.173022] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.174189] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.175352] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.176469] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.177617] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.178773] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.180029] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.181178] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.182252] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.183123] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.183989] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.184171] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.185030] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.185891] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.186758] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.188178] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.189364] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.190365] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.191296] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.192002] vgaarb: loaded
228[ 0.192456] vgaarb: bridge control possible 0000:00:01.0
229[ 0.193388] PCI: Using ACPI for IRQ routing
230[ 0.250618] PCI: pci_cache_line_size set to 64 bytes
231[ 0.250739] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.250742] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
233[ 0.250948] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.252020] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.252830] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.256075] Switched to clocksource kvm-clock
237[ 0.265101] pnp: PnP ACPI init
238[ 0.265711] ACPI: bus type PNP registered
239[ 0.266424] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.266499] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.266563] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.266707] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.266794] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.267169] pnp: PnP ACPI: found 5 devices
245[ 0.267794] ACPI: bus type PNP unregistered
246[ 0.275901] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.276904] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.276907] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.276909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.276911] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.276946] NET: Registered protocol family 2
252[ 0.277844] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.278921] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.279912] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.280927] TCP: reno registered
256[ 0.281429] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.282305] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.283394] NET: Registered protocol family 1
259[ 0.284165] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.284228] PCI: CLS 64 bytes, default 64
261[ 0.284285] Unpacking initramfs...
262[ 0.485765] Freeing initrd memory: 8744K (ffff88001f5f2000 - ffff88001fe7c000)
263[ 0.487210] microcode: AMD CPU family 0x6 not supported
264[ 0.488360] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.489308] audit: initializing netlink subsys (disabled)
266[ 0.490145] audit: type=2000 audit(1444322436.519:1): initialized
267[ 0.491413] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.492448] zbud: loaded
269[ 0.492994] VFS: Disk quotas dquot_6.5.2
270[ 0.493616] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.494656] msgmni has been set to 983
272[ 0.495545] alg: No test for stdrng (krng)
273[ 0.496217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.497362] io scheduler noop registered
275[ 0.497977] io scheduler deadline registered
276[ 0.498669] io scheduler cfq registered (default)
277[ 0.499461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.500336] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.501390] GHES: HEST is not enabled!
280[ 0.502044] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 0.531621] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 0.533266] Linux agpgart interface v0.103
283[ 0.534075] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 0.536354] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 0.537171] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 0.538117] mousedev: PS/2 mouse device common for all mice
287[ 0.539428] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 0.541088] rtc_cmos 00:00: RTC can wake from S4
289[ 0.542210] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 0.543436] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 0.544732] ledtrig-cpu: registered to indicate activity on CPUs
292[ 0.545802] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 0.546856] AMD IOMMUv2 functionality not available on this system
294[ 0.547891] TCP: cubic registered
295[ 0.548446] NET: Registered protocol family 10
296[ 0.549334] mip6: Mobile IPv6
297[ 0.549804] NET: Registered protocol family 17
298[ 0.550493] mpls_gso: MPLS GSO support
299[ 0.551337] registered taskstats version 1
300[ 0.552317] rtc_cmos 00:00: setting system clock to 2015-10-08 16:40:35 UTC (1444322435)
301[ 0.553573] PM: Hibernation image not present or could not be loaded.
302[ 0.555385] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
303[ 0.556659] Write protecting the kernel read-only data: 8192k
304[ 0.560416] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
305[ 0.562311] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 0.576253] systemd-udevd[52]: starting version 215
307[ 0.577408] random: systemd-udevd urandom read with 1 bits of entropy available
308[ 0.587922] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
309[ 0.589132] e1000: Copyright (c) 1999-2006 Intel Corporation.
310[ 0.595266] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
311[ 0.988035] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
312[ 0.989102] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
313[ 0.997625] FS-Cache: Loaded
314[ 1.001635] RPC: Registered named UNIX socket transport module.
315[ 1.002572] RPC: Registered udp transport module.
316[ 1.003328] RPC: Registered tcp transport module.
317[ 1.004056] RPC: Registered tcp NFSv4.1 backchannel transport module.
318[ 1.009593] FS-Cache: Netfs 'nfs' registered for caching
319[ 1.020338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
320[ 1.484199] tsc: Refined TSC clocksource calibration: 2312.020 MHz
321[ 3.024700] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
322[ 3.026659] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
323[ 9.456799] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
324[ 9.460575] systemd[1]: Detected virtualization 'kvm'.
325[ 9.462032] systemd[1]: Detected architecture 'x86-64'.
326[ 11.661954] systemd[1]: Inserted module 'autofs4'
327[ 11.669705] systemd[1]: Set hostname to <cb-test-tgt>.
328[ 12.061014] random: nonblocking pool is initialized
329[ 14.439191] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
330[ 14.442776] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
331[ 14.445917] systemd[1]: Expecting device dev-ttyS0.device...
332[ 14.448351] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
333[ 14.449559] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
334[ 14.450726] systemd[1]: Starting Remote File Systems (Pre).
335[ 14.453339] systemd[1]: Reached target Remote File Systems (Pre).
336[ 14.454280] systemd[1]: Starting Encrypted Volumes.
337[ 14.456662] systemd[1]: Reached target Encrypted Volumes.
338[ 14.457514] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
339[ 14.458768] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
340[ 14.459993] systemd[1]: Starting Paths.
341[ 14.462122] systemd[1]: Reached target Paths.
342[ 14.462845] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
343[ 14.466284] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
344[ 14.467744] systemd[1]: Starting Swap.
345[ 14.469828] systemd[1]: Reached target Swap.
346[ 14.470500] systemd[1]: Starting Root Slice.
347[ 14.472752] systemd[1]: Created slice Root Slice.
348[ 14.473493] systemd[1]: Starting Delayed Shutdown Socket.
349[ 14.476147] systemd[1]: Listening on Delayed Shutdown Socket.
350[ 14.477046] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
351[ 14.481404] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
352[ 14.482491] systemd[1]: Starting Journal Socket (/dev/log).
353[ 14.486376] systemd[1]: Listening on Journal Socket (/dev/log).
354[ 14.487324] systemd[1]: Starting udev Kernel Socket.
355[ 14.489714] systemd[1]: Listening on udev Kernel Socket.
356[ 14.490547] systemd[1]: Starting udev Control Socket.
357[ 14.493347] systemd[1]: Listening on udev Control Socket.
358[ 14.494322] systemd[1]: Starting User and Session Slice.
359[ 14.497199] systemd[1]: Created slice User and Session Slice.
360[ 14.498232] systemd[1]: Starting Journal Socket.
361[ 14.500883] systemd[1]: Listening on Journal Socket.
362[ 14.501805] systemd[1]: Starting System Slice.
363[ 14.504225] systemd[1]: Created slice System Slice.
364[ 14.505016] systemd[1]: Starting Increase datagram queue length...
365[ 14.507940] systemd[1]: Mounting Debug File System...
366[ 14.510521] systemd[1]: Mounting POSIX Message Queue File System...
367[ 14.575887] systemd[1]: Starting Load Kernel Modules...
368[ 14.954924] systemd[1]: Started Set Up Additional Binary Formats.
369[ 14.966413] systemd[1]: Starting Create list of required static device nodes for the current kernel...
370[ 14.973661] systemd[1]: Starting udev Coldplug all Devices...
371[ 14.976379] systemd[1]: Mounting Huge Pages File System...
372[ 14.980345] systemd[1]: Starting system-getty.slice.
373[ 14.986485] systemd[1]: Created slice system-getty.slice.
374[ 14.987377] systemd[1]: Starting system-serial\x2dgetty.slice.
375[ 14.990367] systemd[1]: Created slice system-serial\x2dgetty.slice.
376[ 14.991347] systemd[1]: Starting Slices.
377[ 14.993787] systemd[1]: Reached target Slices.
378[ 14.994509] systemd[1]: Starting Remount Root and Kernel File Systems...
379[ 16.603192] systemd[1]: Started Increase datagram queue length.
380[ 16.604712] systemd[1]: Starting Syslog Socket.
381[ 16.607166] systemd[1]: Listening on Syslog Socket.
382[ 16.608003] systemd[1]: Starting Sockets.
383[ 16.610182] systemd[1]: Reached target Sockets.
384[ 16.610894] systemd[1]: Starting Journal Service...
385[ 16.614967] systemd[1]: Started Journal Service.
386[ 22.054698] systemd-udevd[123]: starting version 215
387[ 33.524086] nfs: server 10.100.1.1 not responding, still trying
388[ 33.525948] nfs: server 10.100.1.1 not responding, still trying
389[ 33.527799] nfs: server 10.100.1.1 not responding, still trying
390[ 33.530011] nfs: server 10.100.1.1 not responding, still trying
391[ 33.531787] nfs: server 10.100.1.1 not responding, still trying
392[ 33.533653] nfs: server 10.100.1.1 not responding, still trying
393[ 33.535243] nfs: server 10.100.1.1 not responding, still trying
394[ 33.536305] nfs: server 10.100.1.1 not responding, still trying
395[ 33.545149] nfs: server 10.100.1.1 OK
396[ 33.645961] nfs: server 10.100.1.1 OK
397[ 33.736820] nfs: server 10.100.1.1 OK
398[ 33.783388] nfs: server 10.100.1.1 OK
399[ 33.909263] nfs: server 10.100.1.1 OK
400[ 33.988861] nfs: server 10.100.1.1 OK
401[ 34.079691] nfs: server 10.100.1.1 OK
402[ 34.090683] nfs: server 10.100.1.1 OK
403[ 34.584090] nfs: server 10.100.1.1 not responding, still trying
404[ 34.644087] nfs: server 10.100.1.1 not responding, still trying
405[ 34.645880] nfs: server 10.100.1.1 not responding, still trying
406[ 34.647641] nfs: server 10.100.1.1 not responding, still trying
407[ 34.649718] nfs: server 10.100.1.1 not responding, still trying
408[ 34.651462] nfs: server 10.100.1.1 not responding, still trying
409[ 34.652763] nfs: server 10.100.1.1 not responding, still trying
410[ 34.653874] nfs: server 10.100.1.1 not responding, still trying
411[ 34.654977] nfs: server 10.100.1.1 not responding, still trying
412[ 35.088087] nfs: server 10.100.1.1 not responding, still trying
413[ 35.089920] nfs: server 10.100.1.1 not responding, still trying
414[ 36.603986] nfs: server 10.100.1.1 OK
415[ 36.678347] nfs: server 10.100.1.1 OK
416[ 36.753020] nfs: server 10.100.1.1 OK
417[ 36.821721] nfs: server 10.100.1.1 OK
418[ 36.880377] nfs: server 10.100.1.1 OK
419[ 36.946023] nfs: server 10.100.1.1 OK
420[ 37.001749] nfs: server 10.100.1.1 OK
421[ 37.079231] nfs: server 10.100.1.1 OK
422[ 37.160887] nfs: server 10.100.1.1 OK
423[ 37.162297] nfs: server 10.100.1.1 OK
424[ 37.163665] nfs: server 10.100.1.1 OK
425[ 37.744100] nfs: server 10.100.1.1 not responding, still trying
426[ 37.745938] nfs: server 10.100.1.1 not responding, still trying
427[ 37.747745] nfs: server 10.100.1.1 not responding, still trying
428[ 37.749565] nfs: server 10.100.1.1 not responding, still trying
429[ 37.751329] nfs: server 10.100.1.1 not responding, still trying
430[ 37.752990] nfs: server 10.100.1.1 not responding, still trying
431[ 37.940093] nfs: server 10.100.1.1 not responding, still trying
432[ 38.464097] nfs: server 10.100.1.1 not responding, still trying
433[ 39.622772] nfs: server 10.100.1.1 OK
434[ 39.699717] nfs: server 10.100.1.1 OK
435[ 39.747614] nfs: server 10.100.1.1 OK
436[ 39.780568] nfs: server 10.100.1.1 OK
437[ 39.831812] nfs: server 10.100.1.1 OK
438[ 39.862036] nfs: server 10.100.1.1 OK
439[ 39.871801] nfs: server 10.100.1.1 OK
440[ 40.182390] nfs: server 10.100.1.1 OK
441[ 40.804074] nfs: server 10.100.1.1 not responding, still trying
442[ 40.806223] nfs: server 10.100.1.1 not responding, still trying
443[ 41.364107] nfs: server 10.100.1.1 not responding, still trying
444[ 41.365911] nfs: server 10.100.1.1 not responding, still trying
445[ 41.367723] nfs: server 10.100.1.1 not responding, still trying
446[ 41.369845] nfs: server 10.100.1.1 not responding, still trying
447[ 41.371552] nfs: server 10.100.1.1 not responding, still trying
448[ 41.372698] nfs: server 10.100.1.1 not responding, still trying
449[ 41.373603] nfs: server 10.100.1.1 not responding, still trying
450[ 41.375047] nfs: server 10.100.1.1 not responding, still trying
451[ 41.376272] nfs: server 10.100.1.1 not responding, still trying
452[ 41.562994] nfs: server 10.100.1.1 OK
453[ 41.564292] nfs: server 10.100.1.1 OK
454[ 41.628442] nfs: server 10.100.1.1 OK
455[ 41.629551] nfs: server 10.100.1.1 OK
456[ 41.714287] nfs: server 10.100.1.1 OK
457[ 41.927953] nfs: server 10.100.1.1 OK
458[ 42.008857] nfs: server 10.100.1.1 OK
459[ 42.080755] nfs: server 10.100.1.1 OK
460[ 42.141260] nfs: server 10.100.1.1 OK
461[ 42.253874] nfs: server 10.100.1.1 OK
462[ 42.259452] nfs: server 10.100.1.1 OK
463[ 45.082312] SCSI subsystem initialized
464[ 45.649832] [drm] Initialized drm 1.1.0 20060810
465[ 45.948746] libata version 3.00 loaded.
466[ 46.099439] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
467[ 46.102704] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
468[ 46.103973] i801_smbus 0000:00:1f.3: Enabling SMBus device
469[ 46.109930] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
470[ 46.702135] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
471[ 46.705280] ACPI: Power Button [PWRF]
472[ 46.865566] ahci 0000:00:1f.2: version 3.0
473[ 46.866101] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
474[ 46.867730] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
475[ 46.870407] ahci 0000:00:1f.2: flags: ncq only
476[ 46.872659] input: PC Speaker as /devices/platform/pcspkr/input/input4
477[ 46.888792] scsi0 : ahci
478[ 46.889487] scsi1 : ahci
479[ 46.890092] scsi2 : ahci
480[ 46.890887] scsi3 : ahci
481[ 46.891504] scsi4 : ahci
482[ 46.892485] scsi5 : ahci
483[ 46.892975] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
484[ 46.894409] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
485[ 46.895747] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
486[ 46.896909] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
487[ 46.898021] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
488[ 46.899159] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
489[ 47.099964] Floppy drive(s): fd0 is 1.44M
490[ 47.117551] FDC 0 is a S82078B
491[ 47.134501] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
492[ 47.220300] ata3: SATA link down (SStatus 0 SControl 300)
493[ 47.222104] ata1: SATA link down (SStatus 0 SControl 300)
494[ 47.225278] ata5: SATA link down (SStatus 0 SControl 300)
495[ 47.227319] ata4: SATA link down (SStatus 0 SControl 300)
496[ 47.228723] ata2: SATA link down (SStatus 0 SControl 300)
497[ 47.230618] ata6: SATA link down (SStatus 0 SControl 300)
498[ 47.282670] iTCO_vendor_support: vendor-support=0
499[ 47.317216] parport_pc 00:03: reported by Plug and Play ACPI
500[ 47.318777] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
501[ 47.393334] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
502[ 47.394988] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
503[ 47.396254] iTCO_wdt: timeout value out of range, using 30
504[ 47.397944] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
505[ 48.023451] ppdev: user-space parallel port driver
506[ 48.715672] kvm: Nested Virtualization enabled
507[ 60.378653] Key type dns_resolver registered
508[ 61.211635] NFS: Registering the id_resolver key type
509[ 61.213242] Key type id_resolver registered
510[ 61.213977] Key type id_legacy registered
511[ 68.656890] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
512[ 104.065530] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
513[ 143.910130] systemd-journald[109]: Received request to flush runtime journal from PID 1
514[ 443.912063] nfs: server 10.100.1.1 not responding, still trying
515[ 444.029927] nfs: server 10.100.1.1 OK
516[ 475.444126] nfs: server 10.100.1.1 not responding, still trying
517[ 476.338965] nfs: server 10.100.1.1 OK