Gitiles
Code Review Sign In
review.coreboot.org / board-status / d76a0e8b6774696beb60886f2f9d5860a292266c / . / asus / kfsn4-dre / 4.0-10212-g0004ae8 / 2015-07-06T21:11:03Z / kernel_log.txt
blob: 97f416b8be2a802df638e9997e4cf9fdb9b5084e [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand5a603152015-07-06 21:43:46 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-10212-g0004ae8-dirty 07/06/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4210 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
Raptor Engineering Automated Coreboot Test Standd76a0e82015-07-06 22:40:58 +0000[diff] [blame^]166[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
Raptor Engineering Automated Coreboot Test Stand5a603152015-07-06 21:43:46 +0000[diff] [blame]167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
Raptor Engineering Automated Coreboot Test Standd76a0e82015-07-06 22:40:58 +0000[diff] [blame^]186[ 0.000000] tsc: Detected 1909.863 MHz processor
187[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.72 BogoMIPS (lpj=7639452)
188[ 0.010953] pid_max: default: 32768 minimum: 301
Raptor Engineering Automated Coreboot Test Stand5a603152015-07-06 21:43:46 +0000[diff] [blame]189[ 0.015676] ACPI: Core revision 20140424
Raptor Engineering Automated Coreboot Test Standd76a0e82015-07-06 22:40:58 +0000[diff] [blame^]190[ 0.022075] ACPI: All ACPI Tables successfully acquired
191[ 0.027609] Security Framework initialized
192[ 0.031788] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037698] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045509] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058830] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068734] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075760] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083721] Initializing cgroup subsys memory
199[ 0.088202] Initializing cgroup subsys devices
200[ 0.092744] Initializing cgroup subsys freezer
201[ 0.097268] Initializing cgroup subsys net_cls
202[ 0.101829] Initializing cgroup subsys blkio
203[ 0.106185] Initializing cgroup subsys perf_event
204[ 0.110983] Initializing cgroup subsys net_prio
205[ 0.115648] tseg: 0000000000
206[ 0.115661] CPU: Physical Processor ID: 0
207[ 0.119782] CPU: Processor Core ID: 0
208[ 0.124576] mce: CPU supports 6 MCE banks
209[ 0.128722] LVT offset 0 assigned for vector 0xf9
210[ 0.133514] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Raptor Engineering Automated Coreboot Test Stand5a603152015-07-06 21:43:46 +0000[diff] [blame]211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
Raptor Engineering Automated Coreboot Test Standd76a0e82015-07-06 22:40:58 +0000[diff] [blame^]213[ 0.149001] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158135] ftrace: allocating 21601 entries in 85 pages
215[ 0.173613] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219263] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336302] Performance Events: AMD PMU driver.
218[ 0.341012] ... version: 0
Raptor Engineering Automated Coreboot Test Stand5a603152015-07-06 21:43:46 +0000[diff] [blame]219[ 0.345111] ... bit width: 48
Raptor Engineering Automated Coreboot Test Standd76a0e82015-07-06 22:40:58 +0000[diff] [blame^]220[ 0.349305] ... generic registers: 4
221[ 0.353403] ... value mask: 0000ffffffffffff
222[ 0.358794] ... max period: 00007fffffffffff
223[ 0.364199] ... fixed-purpose events: 0
224[ 0.368294] ... event mask: 000000000000000f
225[ 0.376326] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384660] x86: Booting SMP configuration:
227[ 0.388929] .... node #0, CPUs: #1 #2 #3
228[ 0.433527] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585122] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589551] smpboot: Total of 8 processors activated (30558.11 BogoMIPS)
231[ 0.602179] devtmpfs: initialized
232[ 0.614198] pinctrl core: initialized pinctrl subsystem
233[ 0.619676] NET: Registered protocol family 16
234[ 0.624409] cpuidle: using governor ladder
235[ 0.628591] cpuidle: using governor menu
236[ 0.632598] node 0 link 1: io port [1000, 3fff]
237[ 0.632601] TOM: 00000000c0000000 aka 3072M
238[ 0.636862] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636866] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636870] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636872] TOM2: 0000000180000000 aka 6144M
242[ 0.641211] bus: [bus 00-05] on node 0 link 1
243[ 0.641214] bus: 00 [io 0x0000-0xffff]
244[ 0.641215] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641217] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641323] ACPI: bus type PCI registered
247[ 0.645414] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652089] PCI: Using configuration type 1 for base access
249[ 0.657736] PCI: Using configuration type 1 for extended access
250[ 0.664358] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670722] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676544] mtrr: corrected configuration.
253[ 0.693218] ACPI: Added _OSI(Module Device)
254[ 0.697518] ACPI: Added _OSI(Processor Device)
255[ 0.702040] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706823] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715919] ACPI: Interpreter enabled
258[ 0.719672] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729117] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738570] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.748015] ACPI: (supports S0 S1 S5)
262[ 0.751771] ACPI: Using IOAPIC for interrupt routing
263[ 0.756858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.785071] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.791340] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.799660] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.838110] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.848279] PCI host bridge to bus 0000:00
269[ 0.852468] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.858041] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.864306] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.871275] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.878240] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.884521] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.884703] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.884710] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.884844] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.884852] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.884876] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.884881] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.884904] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.885006] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.885020] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.885047] pci 0000:00:02.0: supports D1 D2
285[ 0.885052] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.885104] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.890921] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.890935] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.890976] pci 0000:00:02.1: supports D1 D2
290[ 0.890979] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.891027] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.896839] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.896883] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.896892] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.904123] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.910737] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.917962] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.924675] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.924685] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.924690] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.924695] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.924699] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.924704] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.924709] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.924853] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.924865] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.924875] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.924880] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.924888] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.924893] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.924898] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.925066] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.925149] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.930938] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.930988] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.931046] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.936864] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.936903] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.936959] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.942776] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.942815] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.942879] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.948691] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.948732] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.948789] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.954612] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.954805] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.954922] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.955046] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.955201] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.955352] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.955492] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.955667] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.955807] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.955969] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.956138] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.956163] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.956180] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.956190] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.956225] pci 0000:01:04.0: supports D1 D2
341[ 0.956340] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.961407] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.961411] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.961414] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.961513] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.961543] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.961579] pci 0000:02:00.0: reg 0x30: [mem 0x69400000-0x6940ffff pref]
348[ 0.961663] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.961742] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.971875] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.976943] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.977041] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.977066] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.977178] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.977263] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.987384] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.992445] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.992516] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.997642] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.002723] pci_bus 0000:00: on NUMA node 0
361[ 1.002824] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.009261] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.015676] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.023343] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.031025] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.038722] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.046406] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.052819] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.059252] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.066905] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.074574] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.082232] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.088654] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.095112] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.102767] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.110418] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.118097] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.127224] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.133949] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.140666] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.147380] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.154367] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.159650] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.165433] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.173632] vgaarb: loaded
386[ 1.176434] vgaarb: bridge control possible 0000:01:04.0
387[ 1.181989] PCI: Using ACPI for IRQ routing
388[ 1.186267] PCI: pci_cache_line_size set to 64 bytes
389[ 1.186324] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.186328] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.186656] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.193794] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.199085] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.207820] Switched to clocksource hpet
395[ 1.223462] pnp: PnP ACPI init
396[ 1.226701] ACPI: bus type PNP registered
397[ 1.231315] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.231402] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.231486] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.231581] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.231619] pnp 00:04: [dma 2]
402[ 1.231666] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.231689] pnp: PnP ACPI: found 5 devices
404[ 1.235889] ACPI: bus type PNP unregistered
405[ 1.247948] pci 0000:02:00.0: can't claim BAR 6 [mem 0x69400000-0x6940ffff pref]: no compatible bridge window
406[ 1.258016] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.263052] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.269224] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.276098] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.283440] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.290784] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.295834] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.302702] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.307746] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.314614] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.319680] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.324731] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.324733] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.324736] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.324738] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.324742] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.324745] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.324747] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.324750] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.324753] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.324889] NET: Registered protocol family 2
427[ 1.329843] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.337666] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.345088] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.351768] TCP: reno registered
431[ 1.355106] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.361380] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.368236] NET: Registered protocol family 1
434[ 1.373068] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.379294] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.385277] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.390884] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.396467] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.402133] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.407780] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.413368] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.419029] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.424644] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.430220] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.435882] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.441500] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.447081] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.452742] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.458336] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.458345] PCI: CLS 64 bytes, default 64
451[ 1.458451] Unpacking initramfs...
452[ 1.691332] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.699326] PCI-DMA: Disabling AGP.
454[ 1.704560] PCI-DMA: aperture base @ b4000000 size 65536 KB
455[ 1.710232] PCI-DMA: using GART IOMMU.
456[ 1.714061] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.726525] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.734864] microcode: CPU0: patch_level=0x01000096
459[ 1.739861] microcode: CPU1: patch_level=0x01000096
460[ 1.744868] microcode: CPU2: patch_level=0x01000096
461[ 1.749880] microcode: CPU3: patch_level=0x01000096
462[ 1.754893] microcode: CPU4: patch_level=0x01000096
463[ 1.759885] microcode: CPU5: patch_level=0x01000096
464[ 1.764879] microcode: CPU6: patch_level=0x01000096
465[ 1.770982] microcode: CPU7: patch_level=0x01000096
466[ 1.776064] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.785008] LVT offset 1 assigned for vector 0x400
468[ 1.789923] IBS: LVT offset 1 assigned
469[ 1.793801] perf: AMD IBS detected (0x00000007)
470[ 1.799018] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.805476] audit: initializing netlink subsys (disabled)
472[ 1.810998] audit: type=2000 audit(1436221958.620:1): initialized
473[ 1.817958] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.824456] zbud: loaded
475[ 1.827419] VFS: Disk quotas dquot_6.5.2
476[ 1.831485] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.838128] msgmni has been set to 9945
478[ 1.842581] alg: No test for stdrng (krng)
479[ 1.846875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.854521] io scheduler noop registered
481[ 1.858555] io scheduler deadline registered
482[ 1.863007] io scheduler cfq registered (default)
483[ 1.868021] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.868149] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.868263] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.868373] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.868540] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.868568] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.868593] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.868620] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.868642] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.875716] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.882341] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.882351] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.889395] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.896006] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.896016] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.903059] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.903069] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.910111] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.910142] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.915844] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.922678] GHES: HEST is not enabled!
504[ 1.926646] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.953439] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.981231] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.989260] Linux agpgart interface v0.103
508[ 1.993676] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.004223] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.009339] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.014670] mousedev: PS/2 mouse device common for all mice
512[ 2.020445] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.025656] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.032142] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.040132] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.046426] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.052951] AMD IOMMUv2 functionality not available on this system
518[ 2.059366] TCP: cubic registered
519[ 2.062933] NET: Registered protocol family 10
520[ 2.067916] mip6: Mobile IPv6
521[ 2.070980] NET: Registered protocol family 17
522[ 2.075592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.084379] mpls_gso: MPLS GSO support
524[ 2.089107] registered taskstats version 1
525[ 2.094080] rtc_cmos rtc_cmos: setting system clock to 2015-07-06 22:32:40 UTC (1436221960)
526[ 2.102662] PM: Hibernation image not present or could not be loaded.
527[ 2.104489] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.112465] Write protecting the kernel read-only data: 8192k
529[ 2.121805] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.130538] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.154474] systemd-udevd[99]: starting version 215
532[ 2.160334] random: systemd-udevd urandom read with 3 bits of entropy available
533[ 2.189991] ACPI: bus type USB registered
534[ 2.194277] usbcore: registered new interface driver usbfs
535[ 2.199943] usbcore: registered new interface driver hub
536[ 2.205564] usbcore: registered new device driver usb
537[ 2.205600] pps_core: LinuxPPS API ver. 1 registered
538[ 2.205601] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
539[ 2.225597] PTP clock support registered
540[ 2.229914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.236972] tg3.c:v3.137 (May 11, 2014)
542[ 2.241003] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.246976] ehci-pci: EHCI PCI platform driver
544[ 2.247118] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.257559] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.257704] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.257722] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.257742] ehci-pci 0000:00:02.1: debug port 1
549[ 2.257790] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.257817] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.267474] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.267544] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.267546] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.267548] usb usb1: Product: EHCI Host Controller
555[ 2.267549] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.267550] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.267784] hub 1-0:1.0: USB hub found
558[ 2.267792] hub 1-0:1.0: 10 ports detected
559[ 2.331460] ohci-pci: OHCI PCI platform driver
560[ 2.336241] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.341937] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.349508] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.378723] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.389134] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.398994] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.406932] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.409494] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
568[ 2.409496] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
569[ 2.409497] usb usb2: Product: OHCI PCI host controller
570[ 2.409498] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
571[ 2.409500] usb usb2: SerialNumber: 0000:00:02.0
572[ 2.409761] hub 2-0:1.0: USB hub found
573[ 2.409773] hub 2-0:1.0: 10 ports detected
574[ 2.452167] tg3 0000:03:00.0: enabling device (0004 -> 0006)
575[ 2.458122] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
576[ 2.515133] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.525531] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.535398] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.543344] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.557584] FS-Cache: Loaded
581[ 2.564093] RPC: Registered named UNIX socket transport module.
582[ 2.570779] RPC: Registered udp transport module.
583[ 2.576851] RPC: Registered tcp transport module.
584[ 2.582932] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.595355] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.613401] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.659458] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.723318] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.727075] Switched to clocksource tsc
590[ 4.307621] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.314276] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.321240] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 8.523177] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 8.537360] systemd[1]: Detected architecture 'x86-64'.
595[ 10.005835] systemd[1]: Inserted module 'autofs4'
596[ 10.014800] systemd[1]: Set hostname to <cb-test-tgt>.
597[ 10.270542] random: nonblocking pool is initialized
598[ 11.878040] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 11.890930] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 11.906479] systemd[1]: Expecting device dev-ttyS0.device...
601[ 11.920278] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 11.928236] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 11.935963] systemd[1]: Starting Remote File Systems (Pre).
604[ 11.952243] systemd[1]: Reached target Remote File Systems (Pre).
605[ 11.958543] systemd[1]: Starting Encrypted Volumes.
606[ 11.972175] systemd[1]: Reached target Encrypted Volumes.
607[ 11.977740] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 11.985926] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 11.994075] systemd[1]: Starting Paths.
610[ 12.008229] systemd[1]: Reached target Paths.
611[ 12.012915] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
612[ 12.036138] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
613[ 12.045727] systemd[1]: Starting Swap.
614[ 12.060126] systemd[1]: Reached target Swap.
615[ 12.064532] systemd[1]: Starting Root Slice.
616[ 12.076124] systemd[1]: Created slice Root Slice.
617[ 12.080968] systemd[1]: Starting User and Session Slice.
618[ 12.096112] systemd[1]: Created slice User and Session Slice.
619[ 12.102008] systemd[1]: Starting Delayed Shutdown Socket.
620[ 12.116103] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 12.122000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 12.140086] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 12.147194] systemd[1]: Starting Journal Socket (/dev/log).
624[ 12.164088] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 12.170168] systemd[1]: Starting udev Kernel Socket.
626[ 12.184081] systemd[1]: Listening on udev Kernel Socket.
627[ 12.190632] systemd[1]: Starting udev Control Socket.
628[ 12.208065] systemd[1]: Listening on udev Control Socket.
629[ 12.213594] systemd[1]: Starting Journal Socket.
630[ 12.228056] systemd[1]: Listening on Journal Socket.
631[ 12.233156] systemd[1]: Starting System Slice.
632[ 12.248045] systemd[1]: Created slice System Slice.
633[ 12.253033] systemd[1]: Starting system-getty.slice.
634[ 12.268052] systemd[1]: Created slice system-getty.slice.
635[ 12.273596] systemd[1]: Starting system-serial\x2dgetty.slice.
636[ 12.288045] systemd[1]: Created slice system-serial\x2dgetty.slice.
637[ 12.294502] systemd[1]: Starting Increase datagram queue length...
638[ 12.312899] systemd[1]: Mounting Debug File System...
639[ 12.328883] systemd[1]: Mounting POSIX Message Queue File System...
640[ 12.402579] systemd[1]: Starting Load Kernel Modules...
641[ 12.828221] systemd[1]: Started Set Up Additional Binary Formats.
642[ 12.837539] systemd[1]: Starting Create list of required static device nodes for the current kernel...
643[ 12.861109] systemd[1]: Starting udev Coldplug all Devices...
644[ 12.877219] systemd[1]: Mounting Huge Pages File System...
645[ 12.893185] systemd[1]: Starting Slices.
646[ 12.907832] systemd[1]: Reached target Slices.
647[ 12.912605] systemd[1]: Starting Remount Root and Kernel File Systems...
648[ 13.903559] systemd[1]: Started Increase datagram queue length.
649[ 13.910573] systemd[1]: Starting Syslog Socket.
650[ 13.923508] systemd[1]: Listening on Syslog Socket.
651[ 13.928575] systemd[1]: Starting Sockets.
652[ 13.943536] systemd[1]: Reached target Sockets.
653[ 13.948239] systemd[1]: Starting Journal Service...
654[ 13.975545] systemd[1]: Started Journal Service.
655[ 16.767348] systemd-udevd[188]: starting version 215
656[ 16.799049] systemd-journald[172]: Received request to flush runtime journal from PID 1
657[ 28.740988] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
658[ 28.748969] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
659[ 29.541486] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
660[ 29.709321] EDAC MC: Ver: 3.0.0
661[ 29.933284] MCE: In-kernel MCE decoding enabled.
662[ 30.015951] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
663[ 30.024470] ACPI: Power Button [PWRB]
664[ 30.028313] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
665[ 30.035838] ACPI: Power Button [PWRF]
666[ 30.308723] SCSI subsystem initialized
667[ 30.517678] FDC 0 is a post-1991 82077
668[ 30.706729] input: PC Speaker as /devices/platform/pcspkr/input/input4
669[ 30.865776] libata version 3.00 loaded.
670[ 30.902981] AMD64 EDAC driver v3.4.0
671[ 30.906755] EDAC amd64: DRAM ECC enabled.
672[ 30.910861] EDAC amd64: F10h detected (node 0).
673[ 30.915498] EDAC MC: DCT0 chip selects:
674[ 30.915500] EDAC amd64: MC: 0: 0MB 1: 0MB
675[ 30.920333] EDAC amd64: MC: 2: 0MB 3: 0MB
676[ 30.925169] EDAC amd64: MC: 4: 0MB 5: 0MB
677[ 30.930014] EDAC amd64: MC: 6: 1024MB 7: 1024MB
678[ 30.934855] EDAC MC: DCT1 chip selects:
679[ 30.934857] EDAC amd64: MC: 0: 0MB 1: 0MB
680[ 30.939687] EDAC amd64: MC: 2: 0MB 3: 0MB
681[ 30.944519] EDAC amd64: MC: 4: 0MB 5: 0MB
682[ 30.949357] EDAC amd64: MC: 6: 1024MB 7: 1024MB
683[ 30.954143] EDAC amd64: using x4 syndromes.
684[ 30.958433] EDAC amd64: MCT channel count: 2
685[ 30.962890] EDAC amd64: CS6: Registered DDR2 RAM
686[ 30.967658] EDAC amd64: CS7: Registered DDR2 RAM
687[ 30.972689] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
688[ 30.982524] EDAC amd64: DRAM ECC enabled.
689[ 30.986628] EDAC amd64: F10h detected (node 1).
690[ 30.991283] EDAC MC: DCT0 chip selects:
691[ 30.991286] EDAC amd64: MC: 0: 1024MB 1: 0MB
692[ 30.996079] EDAC amd64: MC: 2: 0MB 3: 0MB
693[ 31.000904] EDAC amd64: MC: 4: 0MB 5: 0MB
694[ 31.005733] EDAC amd64: MC: 6: 0MB 7: 0MB
695[ 31.010560] EDAC MC: DCT1 chip selects:
696[ 31.010563] EDAC amd64: MC: 0: 0MB 1: 0MB
697[ 31.010834] acpi-cpufreq: overriding BIOS provided _PSD data
698[ 31.021102] EDAC amd64: MC: 2: 0MB 3: 0MB
699[ 31.025934] EDAC amd64: MC: 4: 0MB 5: 0MB
700[ 31.030791] EDAC amd64: MC: 6: 0MB 7: 0MB
701[ 31.035600] EDAC amd64: using x4 syndromes.
702[ 31.039865] EDAC amd64: MCT channel count: 1
703[ 31.044279] EDAC amd64: CS0: Registered DDR2 RAM
704[ 31.049303] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
705[ 31.059187] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
706[ 31.059320] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
707[ 31.059368] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
708[ 31.059410] sata_nv 0000:00:07.0: version 3.5
709[ 31.059716] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
710[ 31.060416] scsi0 : sata_nv
711[ 31.090805] scsi1 : sata_nv
712[ 31.093820] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
713[ 31.101026] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
714[ 31.108665] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
715[ 31.115701] scsi2 : sata_nv
716[ 31.118829] scsi3 : sata_nv
717[ 31.121811] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
718[ 31.129061] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
719[ 31.136422] pata_amd 0000:00:06.0: version 0.4.1
720[ 31.137270] scsi4 : pata_amd
721[ 31.140568] scsi5 : pata_amd
722[ 31.143659] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
723[ 31.150750] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
724[ 31.417397] ata1: SATA link down (SStatus 0 SControl 300)
725[ 31.445375] ata3: SATA link down (SStatus 0 SControl 300)
726[ 31.733296] ata2: SATA link down (SStatus 0 SControl 300)
727[ 31.992121] kvm: Nested Virtualization enabled
728[ 31.996747] kvm: Nested Paging enabled
729[ 32.049172] ata4: SATA link down (SStatus 0 SControl 300)
730[ 70.717244] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****