blob: 41798ccbc1a05c067d23c23c1a383d7a4d3be9cb [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +02001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.12.5-gnuowen (sam@judas) (gcc version 4.8.2 (Debian 4.8.2-1) ) #3 SMP PREEMPT Sun Dec 15 18:37:19 MST 2013
5[ 0.000000] Disabled fast string operations
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
8[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
9[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000007f6bffff] usable
10[ 0.000000] BIOS-e820: [mem 0x000000007f6c0000-0x000000007f7fffff] type 16
11[ 0.000000] BIOS-e820: [mem 0x000000007f800000-0x000000007fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
13[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: LENOVO ThinkPad X60 / X60s, BIOS x60 12/15/2013
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] e820: last_pfn = 0x7f6c0 max_arch_pfn = 0x100000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000 mask 080000000 write-back
26[ 0.000000] 1 base 07F800000 mask 0FF800000 uncachable
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] PAT not supported by CPU.
34[ 0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [c00f0400]
35[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
36[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
37[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
38[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
39[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
40[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
41[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
42[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
44[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
45[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
46[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
47[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
48[ 0.000000] BRK [0x017b3000, 0x017b3fff] PGTABLE
49[ 0.000000] RAMDISK: [mem 0x37900000-0x37c77fff]
50[ 0.000000] Allocated new RAMDISK: [mem 0x37486000-0x377fdb83]
51[ 0.000000] Move RAMDISK from [mem 0x37900000-0x37c77b83] to [mem 0x37486000-0x377fdb83]
52[ 0.000000] ACPI: RSDP 000f0800 00024 (v02 CORE )
53[ 0.000000] ACPI: XSDT 7f6d28e0 0004C (v01 CORE COREBOOT 00000000 CORE 00000000)
54[ 0.000000] ACPI: HPET 7f6d2a10 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
55[ 0.000000] ACPI: APIC 7f6d2a50 00068 (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: MCFG 7f6d2ac0 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: FACP 7f6d5d10 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: DSDT 7f6d2b40 030C3 (v03 COREv4 COREBOOT 20090419 INTL 20131115)
59[ 0.000000] ACPI: FACS 7f6d2b00 00040
60[ 0.000000] ACPI: SSDT 7f6d5e10 002FC (v02 CORE COREBOOT 0000002A CORE 0000002A)
61[ 0.000000] ACPI: Local APIC address 0xfee00000
62[ 0.000000] 1150MB HIGHMEM available.
63[ 0.000000] 887MB LOWMEM available.
64[ 0.000000] mapped low ram: 0 - 377fe000
65[ 0.000000] low ram: 0 - 377fe000
66[ 0.000000] BRK [0x017b4000, 0x017b4fff] PGTABLE
67[ 0.000000] Zone ranges:
68[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
69[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
70[ 0.000000] HighMem [mem 0x377fe000-0x7f6bffff]
71[ 0.000000] Movable zone start for each node
72[ 0.000000] Early memory node ranges
73[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
74[ 0.000000] node 0: [mem 0x00100000-0x7f6bffff]
75[ 0.000000] On node 0 totalpages: 521823
76[ 0.000000] DMA zone: 32 pages used for memmap
77[ 0.000000] DMA zone: 0 pages reserved
78[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
79[ 0.000000] Normal zone: 1744 pages used for memmap
80[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
81[ 0.000000] HighMem zone: 2302 pages used for memmap
82[ 0.000000] HighMem zone: 294594 pages, LIFO batch:31
83[ 0.000000] Using APIC driver default
84[ 0.000000] ACPI: PM-Timer IO Port: 0x508
85[ 0.000000] ACPI: Local APIC address 0xfee00000
86[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
87[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
88[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
89[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
90[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
91[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
92[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
93[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
94[ 0.000000] ACPI: IRQ0 used by override.
95[ 0.000000] ACPI: IRQ2 used by override.
96[ 0.000000] ACPI: IRQ9 used by override.
97[ 0.000000] Using ACPI (MADT) for SMP configuration information
98[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
99[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
100[ 0.000000] nr_irqs_gsi: 40
101[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
102[ 0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
103[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
104[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6460000 s31296 r0 d21952 u53248
105[ 0.000000] pcpu-alloc: s31296 r0 d21952 u53248 alloc=13*4096
106[ 0.000000] pcpu-alloc: [0] 0 [0] 1
107[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520047
108[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=7dbff8ba-e787-45c7-a2e6-3a315acc88d6 ro processor.max_cstate=2 resume=/dev/sda2 quiet
109[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
110[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
111[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
112[ 0.000000] Initializing CPU#0
113[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6c0)
114[ 0.000000] Memory: 2058440K/2087292K available (4064K kernel code, 317K rwdata, 1536K rodata, 464K init, 1448K bss, 28852K reserved, 1178376K highmem)
115[ 0.000000] virtual kernel memory layout:
116[ 0.000000] fixmap : 0xfff8e000 - 0xfffff000 ( 452 kB)
117[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
118[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
119[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
120[ 0.000000] .init : 0xc15ca000 - 0xc163e000 ( 464 kB)
121[ 0.000000] .data : 0xc13f8443 - 0xc15c9580 (1860 kB)
122[ 0.000000] .text : 0xc1000000 - 0xc13f8443 (4065 kB)
123[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
124[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
125[ 0.000000] Preemptible hierarchical RCU implementation.
126[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
127[ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
128[ 0.000000] Console: colour dummy device 80x25
129[ 0.000000] console [tty0] enabled
130[ 0.000000] allocated 4194304 bytes of page_cgroup
131[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
132[ 0.000000] hpet clockevent registered
133[ 0.000000] tsc: Fast TSC calibration using PIT
134[ 0.000000] tsc: Detected 1828.696 MHz processor
135[ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.39 BogoMIPS (lpj=1828696)
136[ 0.001008] pid_max: default: 32768 minimum: 301
137[ 0.001055] Security Framework initialized
138[ 0.001062] SELinux: Disabled at boot.
139[ 0.001073] Mount-cache hash table entries: 512
140[ 0.002044] Initializing cgroup subsys memory
141[ 0.002061] Initializing cgroup subsys devices
142[ 0.002064] Initializing cgroup subsys freezer
143[ 0.002067] Initializing cgroup subsys net_cls
144[ 0.002071] Initializing cgroup subsys blkio
145[ 0.002074] Initializing cgroup subsys perf_event
146[ 0.002105] Disabled fast string operations
147[ 0.002111] CPU: Physical Processor ID: 0
148[ 0.002113] CPU: Processor Core ID: 0
149[ 0.002116] mce: CPU supports 6 MCE banks
150[ 0.002128] CPU0: Thermal monitoring enabled (TM2)
151[ 0.002143] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
152[ 0.002143] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
153[ 0.002143] tlb_flushall_shift: 6
154[ 0.002241] Freeing SMP alternatives memory: 12K (c163e000 - c1641000)
155[ 0.002245] ACPI: Core revision 20130725
156[ 0.005157] ACPI: All ACPI Tables successfully acquired
157[ 0.006015] Enabling APIC mode: Flat. Using 1 I/O APICs
158[ 0.006479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
159[ 0.016498] smpboot: CPU0: Intel(R) Core(TM) Duo CPU L2500 @ 1.83GHz (fam: 06, model: 0e, stepping: 0c)
160[ 0.017000] Performance Events: Core events, core PMU driver.
161[ 0.017000] ... version: 1
162[ 0.017000] ... bit width: 40
163[ 0.017000] ... generic registers: 2
164[ 0.017000] ... value mask: 000000ffffffffff
165[ 0.017000] ... max period: 000000007fffffff
166[ 0.017000] ... fixed-purpose events: 0
167[ 0.017000] ... event mask: 0000000000000003
168[ 0.022080] CPU 1 irqstacks, hard=f54a8000 soft=f54aa000
169[ 0.022082] smpboot: Booting Node 0, Processors # 1 OK
170[ 0.002000] Initializing CPU#1
171[ 0.002000] Disabled fast string operations
172[ 0.034074] Brought up 2 CPUs
173[ 0.034081] smpboot: Total of 2 processors activated (7314.78 BogoMIPS)
174[ 0.035127] devtmpfs: initialized
175[ 0.036250] regulator-dummy: no parameters
176[ 0.036324] NET: Registered protocol family 16
177[ 0.036487] cpuidle: using governor ladder
178[ 0.036490] cpuidle: using governor menu
179[ 0.036565] ACPI: bus type PCI registered
180[ 0.036613] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
181[ 0.036618] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
182[ 0.036620] PCI: Using MMCONFIG for extended config space
183[ 0.036622] PCI: Using configuration type 1 for base access
184[ 0.038044] bio: create slab <bio-0> at 0
185[ 0.038062] ACPI: Added _OSI(Module Device)
186[ 0.038066] ACPI: Added _OSI(Processor Device)
187[ 0.038068] ACPI: Added _OSI(3.0 _SCP Extensions)
188[ 0.038071] ACPI: Added _OSI(Processor Aggregator Device)
189[ 0.039675] ACPI: EC: Look up EC in DSDT
190[ 0.041991] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
191[ 0.042439] ACPI: Interpreter enabled
192[ 0.042451] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
193[ 0.042458] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
194[ 0.042478] ACPI: (supports S0 S3 S4 S5)
195[ 0.042480] ACPI: Using IOAPIC for interrupt routing
196[ 0.042511] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
197[ 0.042798] ACPI: ACPI Dock Station Driver: 1 docks/bays found
198[ 0.050859] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
199[ 0.050940] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
200[ 0.051020] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
201[ 0.051152] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
202[ 0.051188] PCI host bridge to bus 0000:00
203[ 0.051192] pci_bus 0000:00: root bus resource [bus 00-ff]
204[ 0.051196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
205[ 0.051200] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
206[ 0.051204] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
207[ 0.051208] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
208[ 0.051212] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
209[ 0.051215] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
210[ 0.051219] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
211[ 0.051223] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
212[ 0.051227] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
213[ 0.051230] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
214[ 0.051234] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
215[ 0.051238] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
216[ 0.051242] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
217[ 0.051246] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
218[ 0.051249] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
219[ 0.051253] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
220[ 0.051257] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
221[ 0.051261] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
222[ 0.051275] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
223[ 0.051417] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
224[ 0.051432] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
225[ 0.051441] pci 0000:00:02.0: reg 0x14: [io 0x50a0-0x50a7]
226[ 0.051449] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
227[ 0.051458] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
228[ 0.051587] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
229[ 0.051599] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
230[ 0.051787] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
231[ 0.051812] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
232[ 0.051919] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
233[ 0.052006] pci 0000:00:1b.0: System wakeup disabled by ACPI
234[ 0.052061] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
235[ 0.052173] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
236[ 0.052300] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
237[ 0.052411] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
238[ 0.052535] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
239[ 0.052643] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
240[ 0.052770] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
241[ 0.052872] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
242[ 0.052999] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
243[ 0.053058] pci 0000:00:1d.0: reg 0x20: [io 0x5000-0x501f]
244[ 0.053171] pci 0000:00:1d.0: System wakeup disabled by ACPI
245[ 0.053225] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
246[ 0.053283] pci 0000:00:1d.1: reg 0x20: [io 0x5020-0x503f]
247[ 0.053393] pci 0000:00:1d.1: System wakeup disabled by ACPI
248[ 0.053443] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
249[ 0.053528] pci 0000:00:1d.2: reg 0x20: [io 0x5040-0x505f]
250[ 0.053653] pci 0000:00:1d.2: System wakeup disabled by ACPI
251[ 0.053702] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
252[ 0.053761] pci 0000:00:1d.3: reg 0x20: [io 0x5060-0x507f]
253[ 0.053871] pci 0000:00:1d.3: System wakeup disabled by ACPI
254[ 0.053933] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
255[ 0.053960] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
256[ 0.054077] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
257[ 0.054149] pci 0000:00:1d.7: System wakeup disabled by ACPI
258[ 0.054205] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
259[ 0.054376] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
260[ 0.054491] pci 0000:00:1f.0: address space collision: [io 0x0500-0x057f] conflicts with ACPI CPU throttle [??? 0x00000510-0x00000515 flags 0x80000000]
261[ 0.054499] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
262[ 0.054505] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
263[ 0.054511] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
264[ 0.054517] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
265[ 0.054658] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
266[ 0.054677] pci 0000:00:1f.1: reg 0x10: [io 0x50a8-0x50af]
267[ 0.054692] pci 0000:00:1f.1: reg 0x14: [io 0x50c8-0x50cb]
268[ 0.054706] pci 0000:00:1f.1: reg 0x18: [io 0x50b0-0x50b7]
269[ 0.054721] pci 0000:00:1f.1: reg 0x1c: [io 0x50cc-0x50cf]
270[ 0.054735] pci 0000:00:1f.1: reg 0x20: [io 0x5080-0x508f]
271[ 0.054867] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
272[ 0.054893] pci 0000:00:1f.2: reg 0x10: [io 0x50b8-0x50bf]
273[ 0.054907] pci 0000:00:1f.2: reg 0x14: [io 0x50d0-0x50d3]
274[ 0.054920] pci 0000:00:1f.2: reg 0x18: [io 0x50c0-0x50c7]
275[ 0.054934] pci 0000:00:1f.2: reg 0x1c: [io 0x50d4-0x50d7]
276[ 0.054947] pci 0000:00:1f.2: reg 0x20: [io 0x5090-0x509f]
277[ 0.054961] pci 0000:00:1f.2: reg 0x24: [mem 0xe4444400-0xe44447ff]
278[ 0.055024] pci 0000:00:1f.2: PME# supported from D3hot
279[ 0.055139] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
280[ 0.055214] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
281[ 0.055456] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
282[ 0.055489] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
283[ 0.055532] pci 0000:01:00.0: reg 0x18: [io 0x4000-0x401f]
284[ 0.055719] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
285[ 0.055799] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
286[ 0.055819] pci 0000:00:1c.0: PCI bridge to [bus 01]
287[ 0.055826] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
288[ 0.055832] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
289[ 0.055944] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
290[ 0.055978] pci 0000:02:00.0: reg 0x10: [mem 0xe4200000-0xe420ffff 64bit]
291[ 0.056133] pci 0000:02:00.0: supports D1
292[ 0.056137] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
293[ 0.058020] pci 0000:00:1c.1: PCI bridge to [bus 02]
294[ 0.058030] pci 0000:00:1c.1: bridge window [mem 0xe4200000-0xe42fffff]
295[ 0.058118] pci 0000:00:1c.2: PCI bridge to [bus 03]
296[ 0.058209] pci 0000:00:1c.3: PCI bridge to [bus 04]
297[ 0.058285] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
298[ 0.058310] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
299[ 0.058349] pci 0000:05:00.0: supports D1 D2
300[ 0.058352] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
301[ 0.058394] pci 0000:05:00.0: System wakeup disabled by ACPI
302[ 0.058447] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
303[ 0.058471] pci 0000:05:00.1: reg 0x10: [mem 0xe2001000-0xe20017ff]
304[ 0.058574] pci 0000:05:00.1: supports D1 D2
305[ 0.058578] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
306[ 0.058657] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
307[ 0.058682] pci 0000:05:00.2: reg 0x10: [mem 0xe2001800-0xe20018ff]
308[ 0.058785] pci 0000:05:00.2: supports D1 D2
309[ 0.058788] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
310[ 0.058919] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
311[ 0.058925] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
312[ 0.058932] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
313[ 0.058942] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
314[ 0.058946] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
315[ 0.058950] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
316[ 0.058954] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
317[ 0.058957] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
318[ 0.058961] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
319[ 0.058965] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
320[ 0.058969] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
321[ 0.058973] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
322[ 0.058977] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
323[ 0.058981] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
324[ 0.058985] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
325[ 0.058989] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
326[ 0.058993] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
327[ 0.058997] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
328[ 0.059004] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
329[ 0.059008] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
330[ 0.059012] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
331[ 0.059016] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
332[ 0.059079] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05-06] (conflicts with (null) [bus 05-06])
333[ 0.059086] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
334[ 0.059091] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05-06] (conflicts with (null) [bus 05-06])
335[ 0.059098] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
336[ 0.059142] pci_bus 0000:00: on NUMA node 0
337[ 0.059364] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
338[ 0.059455] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
339[ 0.059540] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
340[ 0.059626] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
341[ 0.059711] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
342[ 0.059796] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
343[ 0.059881] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
344[ 0.059966] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
345[ 0.060380] ACPI: \_SB_.PCI0: notify handler is installed
346[ 0.060441] Found 1 acpi root devices
347[ 0.060520] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
348[ 0.060581] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
349[ 0.060581] vgaarb: loaded
350[ 0.060581] vgaarb: bridge control possible 0000:00:02.0
351[ 0.061016] SCSI subsystem initialized
352[ 0.061050] libata version 3.00 loaded.
353[ 0.061090] PCI: Using ACPI for IRQ routing
354[ 0.063629] PCI: pci_cache_line_size set to 64 bytes
355[ 0.063722] e820: reserve RAM buffer [mem 0x7f6c0000-0x7fffffff]
356[ 0.063928] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
357[ 0.063936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
358[ 0.063942] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
359[ 0.066025] Switched to clocksource hpet
360[ 0.070148] pnp: PnP ACPI init
361[ 0.070169] ACPI: bus type PNP registered
362[ 0.070278] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
363[ 0.070283] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
364[ 0.070288] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
365[ 0.070292] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
366[ 0.070296] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
367[ 0.070301] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
368[ 0.070305] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
369[ 0.070309] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
370[ 0.070315] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
371[ 0.070840] pnp 00:01: [dma 4]
372[ 0.070877] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
373[ 0.070920] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
374[ 0.071074] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
375[ 0.071079] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
376[ 0.071138] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
377[ 0.071211] system 00:05: [io 0x0800-0x080f] has been reserved
378[ 0.071216] system 00:05: [io 0x0500-0x057f] could not be reserved
379[ 0.071221] system 00:05: [io 0x0480-0x04bf] has been reserved
380[ 0.071225] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
381[ 0.071272] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
382[ 0.071335] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
383[ 0.071393] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
384[ 0.071439] pnp: PnP ACPI: found 9 devices
385[ 0.071441] ACPI: bus type PNP unregistered
386[ 0.109275] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
387[ 0.109325] pci 0000:00:1f.0: BAR 13: [io 0x0500-0x057f] has bogus alignment
388[ 0.109330] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
389[ 0.109341] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
390[ 0.109345] pci 0000:00:1c.0: PCI bridge to [bus 01]
391[ 0.109351] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
392[ 0.109359] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
393[ 0.109366] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
394[ 0.109375] pci 0000:00:1c.1: PCI bridge to [bus 02]
395[ 0.109383] pci 0000:00:1c.1: bridge window [mem 0xe4200000-0xe42fffff]
396[ 0.109396] pci 0000:00:1c.2: PCI bridge to [bus 03]
397[ 0.109412] pci 0000:00:1c.3: PCI bridge to [bus 04]
398[ 0.109432] pci 0000:05:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
399[ 0.109436] pci 0000:05:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
400[ 0.109441] pci 0000:05:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
401[ 0.109445] pci 0000:05:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
402[ 0.109454] pci 0000:05:00.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
403[ 0.109462] pci 0000:05:00.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
404[ 0.109466] pci 0000:05:00.0: BAR 13: assigned [io 0x2000-0x20ff]
405[ 0.109470] pci 0000:05:00.0: BAR 14: assigned [io 0x2400-0x24ff]
406[ 0.109474] pci 0000:05:00.0: CardBus bridge to [bus 06-09]
407[ 0.109478] pci 0000:05:00.0: bridge window [io 0x2000-0x20ff]
408[ 0.109484] pci 0000:05:00.0: bridge window [io 0x2400-0x24ff]
409[ 0.109491] pci 0000:05:00.0: bridge window [mem 0x84000000-0x87ffffff pref]
410[ 0.109498] pci 0000:05:00.0: bridge window [mem 0x88000000-0x8bffffff]
411[ 0.109505] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
412[ 0.109510] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
413[ 0.109518] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
414[ 0.109525] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
415[ 0.109535] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
416[ 0.109539] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
417[ 0.109543] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
418[ 0.109546] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
419[ 0.109550] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
420[ 0.109554] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
421[ 0.109558] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
422[ 0.109561] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
423[ 0.109565] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
424[ 0.109569] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
425[ 0.109573] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
426[ 0.109576] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
427[ 0.109580] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
428[ 0.109584] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
429[ 0.109588] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
430[ 0.109591] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
431[ 0.109595] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff]
432[ 0.109599] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
433[ 0.109603] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
434[ 0.109607] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
435[ 0.109611] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
436[ 0.109615] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
437[ 0.109619] pci_bus 0000:05: resource 0 [io 0x2000-0x3fff]
438[ 0.109622] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
439[ 0.109626] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
440[ 0.109630] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
441[ 0.109634] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
442[ 0.109637] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
443[ 0.109641] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
444[ 0.109645] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
445[ 0.109648] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
446[ 0.109652] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
447[ 0.109656] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
448[ 0.109660] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
449[ 0.109663] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
450[ 0.109667] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
451[ 0.109671] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
452[ 0.109675] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
453[ 0.109679] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
454[ 0.109682] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
455[ 0.109686] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
456[ 0.109690] pci_bus 0000:05: resource 20 [mem 0x80000000-0xfebfffff]
457[ 0.109694] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
458[ 0.109698] pci_bus 0000:06: resource 0 [io 0x2000-0x20ff]
459[ 0.109701] pci_bus 0000:06: resource 1 [io 0x2400-0x24ff]
460[ 0.109705] pci_bus 0000:06: resource 2 [mem 0x84000000-0x87ffffff pref]
461[ 0.109709] pci_bus 0000:06: resource 3 [mem 0x88000000-0x8bffffff]
462[ 0.109753] NET: Registered protocol family 2
463[ 0.109948] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
464[ 0.109994] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
465[ 0.110049] TCP: Hash tables configured (established 8192 bind 8192)
466[ 0.110083] TCP: reno registered
467[ 0.110087] UDP hash table entries: 512 (order: 2, 16384 bytes)
468[ 0.110098] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
469[ 0.110175] NET: Registered protocol family 1
470[ 0.110192] pci 0000:00:02.0: Boot video device
471[ 0.111450] PCI: CLS 64 bytes, default 64
472[ 0.111502] Unpacking initramfs...
473[ 0.791175] Freeing initrd memory: 3552K (f7486000 - f77fe000)
474[ 0.791704] audit: initializing netlink socket (disabled)
475[ 0.791723] type=2000 audit(1387161180.790:1): initialized
476[ 0.792154] bounce pool size: 64 pages
477[ 0.792161] HugeTLB registered 4 MB page size, pre-allocated 0 pages
478[ 0.794474] VFS: Disk quotas dquot_6.5.2
479[ 0.794541] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
480[ 0.795109] msgmni has been set to 1725
481[ 0.795542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
482[ 0.795546] io scheduler noop registered
483[ 0.795549] io scheduler deadline registered
484[ 0.795622] io scheduler cfq registered (default)
485[ 0.795925] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
486[ 0.796195] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
487[ 0.796433] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
488[ 0.796661] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
489[ 0.796807] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
490[ 0.796811] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
491[ 0.796818] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
492[ 0.796845] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
493[ 0.796848] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
494[ 0.796855] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
495[ 0.796882] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
496[ 0.796889] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
497[ 0.796916] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
498[ 0.796922] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
499[ 0.796963] intel_idle: does not run on family 6 model 14
500[ 0.797073] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
501[ 0.797080] ACPI: Sleep Button [SLPB]
502[ 0.797142] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
503[ 0.797271] ACPI: Lid Switch [LID]
504[ 0.797345] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
505[ 0.797350] ACPI: Power Button [PWRF]
506[ 0.797715] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
507[ 0.797771] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
508[ 0.797864] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
509[ 0.798568] Linux agpgart interface v0.103
510[ 0.798617] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
511[ 0.798662] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
512[ 0.799316] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
513[ 0.799471] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
514[ 0.799524] [drm] Initialized drm 1.1.0 20060810
515[ 0.801171] [drm] Memory usable by graphics device = 256M
516[ 0.801182] i915 0000:00:02.0: setting latency timer to 64
517[ 0.801421] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
518[ 0.801423] [drm] Driver supports precise vblank timestamp query.
519[ 0.801514] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
520[ 0.826643] [drm] initialized overlay support
521[ 1.157645] fbcon: inteldrmfb (fb0) is primary device
522[ 1.414956] Console: switching to colour frame buffer device 128x48
523[ 1.419515] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
524[ 1.419519] i915 0000:00:02.0: registered panic notifier
525[ 1.419526] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
526[ 1.419664] ahci 0000:00:1f.2: version 3.0
527[ 1.419849] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
528[ 1.419899] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
529[ 1.419930] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
530[ 1.419936] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
531[ 1.419943] ahci 0000:00:1f.2: setting latency timer to 64
532[ 1.420470] scsi0 : ahci
533[ 1.420578] scsi1 : ahci
534[ 1.420675] scsi2 : ahci
535[ 1.420774] scsi3 : ahci
536[ 1.420834] ata1: SATA max UDMA/133 abar m1024@0xe4444400 port 0xe4444500 irq 44
537[ 1.420837] ata2: DUMMY
538[ 1.420840] ata3: DUMMY
539[ 1.420842] ata4: DUMMY
540[ 1.420985] ata_piix 0000:00:1f.1: version 2.13
541[ 1.421153] ata_piix 0000:00:1f.1: setting latency timer to 64
542[ 1.421560] scsi4 : ata_piix
543[ 1.421643] scsi5 : ata_piix
544[ 1.421691] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
545[ 1.421695] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
546[ 1.421781] ata5: port disabled--ignoring
547[ 1.421812] ata6: port disabled--ignoring
548[ 1.421853] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
549[ 1.442835] serio: i8042 KBD port at 0x60,0x64 irq 1
550[ 1.442870] serio: i8042 AUX port at 0x60,0x64 irq 12
551[ 1.443025] mousedev: PS/2 mouse device common for all mice
552[ 1.443090] rtc_cmos 00:06: RTC can wake from S4
553[ 1.443260] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
554[ 1.443298] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
555[ 1.443390] device-mapper: uevent: version 1.0.3
556[ 1.443476] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
557[ 1.443493] sdhci: Secure Digital Host Controller Interface driver
558[ 1.443495] sdhci: Copyright(c) Pierre Ossman
559[ 1.443516] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
560[ 1.443528] pci 0000:00:1e.0: enabling device (0004 -> 0007)
561[ 1.443536] pci 0000:00:1e.0: setting latency timer to 64
562[ 1.444635] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
563[ 1.444643] mmc0: no vqmmc regulator found
564[ 1.444645] mmc0: no vmmc regulator found
565[ 1.445654] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
566[ 1.445735] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
567[ 1.445882] TCP: cubic registered
568[ 1.446056] NET: Registered protocol family 10
569[ 1.446313] mip6: Mobile IPv6
570[ 1.446317] NET: Registered protocol family 17
571[ 1.446329] Key type dns_resolver registered
572[ 1.446539] Using IPI No-Shortcut mode
573[ 1.446690] registered taskstats version 1
574[ 1.447307] rtc_cmos 00:06: setting system clock to 2013-12-16 02:33:02 UTC (1387161182)
575[ 1.452380] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
576[ 1.793020] tsc: Refined TSC clocksource calibration: 1828.749 MHz
577[ 1.880031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
578[ 1.935546] ata1.00: ATA-8: OCZ-VERTEX2, 1.35, max UDMA/133
579[ 1.935550] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
580[ 1.995456] ata1.00: configured for UDMA/133
581[ 1.995619] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.35 PQ: 0 ANSI: 5
582[ 1.995784] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
583[ 1.995922] sd 0:0:0:0: [sda] Write Protect is off
584[ 1.995926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
585[ 1.995957] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
586[ 1.996664] sda: sda1 sda2 sda3
587[ 1.997081] sd 0:0:0:0: [sda] Attached SCSI disk
588[ 1.997483] Freeing unused kernel memory: 464K (c15ca000 - c163e000)
589[ 1.997619] Write protecting the kernel text: 4068k
590[ 1.997667] Write protecting the kernel read-only data: 1540k
591[ 2.060478] systemd-udevd[73]: starting version 204
592[ 2.100982] thermal LNXTHERM:00: registered as thermal_zone0
593[ 2.100988] ACPI: Thermal Zone [THM0] (62 C)
594[ 2.102347] thermal LNXTHERM:01: registered as thermal_zone1
595[ 2.102351] ACPI: Thermal Zone [THM1] (47 C)
596[ 2.214352] PM: Starting manual resume from disk
597[ 2.236213] video LNXVIDEO:00: Restoring backlight state
598[ 2.241546] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
599[ 2.467897] systemd-udevd[313]: starting version 204
600[ 2.560348] ACPI: Requesting acpi_cpufreq
601[ 2.565048] ACPI: processor limited to max C-state 2
602[ 2.565551] Monitor-Mwait will be used to enter C-1 state
603[ 2.565564] tsc: Marking TSC unstable due to TSC halts in idle
604[ 2.565609] ACPI: acpi_idle registered with cpuidle
605[ 2.573248] pps_core: LinuxPPS API ver. 1 registered
606[ 2.573253] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
607[ 2.573798] PTP clock support registered
608[ 2.577561] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
609[ 2.577566] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
610[ 2.577818] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
611[ 2.577862] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
612[ 2.578968] ACPI: AC Adapter [AC] (on-line)
613[ 2.579257] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20130725/ac-126)
614[ 2.592811] ACPI: bus type USB registered
615[ 2.595282] usbcore: registered new interface driver usbfs
616[ 2.595300] usbcore: registered new interface driver hub
617[ 2.597339] usbcore: registered new device driver usb
618[ 2.599130] ACPI Warning: 0x00000528-0x0000052f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
619[ 2.599140] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
620[ 2.599145] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
621[ 2.599409] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
622[ 2.599413] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
623[ 2.599419] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
624[ 2.599422] lpc_ich: Resource conflict(s) found affecting gpio_ich
625[ 2.600723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
626[ 2.601904] uhci_hcd: USB Universal Host Controller Interface driver
627[ 2.602091] ehci-pci: EHCI PCI platform driver
628[ 2.602133] uhci_hcd 0000:00:1d.0: setting latency timer to 64
629[ 2.602139] uhci_hcd 0000:00:1d.0: UHCI Host Controller
630[ 2.602148] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
631[ 2.602185] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
632[ 2.602346] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
633[ 2.602351] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
634[ 2.602354] usb usb1: Product: UHCI Host Controller
635[ 2.602358] usb usb1: Manufacturer: Linux 3.12.5-gnuowen uhci_hcd
636[ 2.602361] usb usb1: SerialNumber: 0000:00:1d.0
637[ 2.602528] hub 1-0:1.0: USB hub found
638[ 2.602540] hub 1-0:1.0: 2 ports detected
639[ 2.602822] uhci_hcd 0000:00:1d.1: setting latency timer to 64
640[ 2.602827] uhci_hcd 0000:00:1d.1: UHCI Host Controller
641[ 2.602835] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
642[ 2.602886] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
643[ 2.602960] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
644[ 2.602964] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
645[ 2.602967] usb usb2: Product: UHCI Host Controller
646[ 2.602971] usb usb2: Manufacturer: Linux 3.12.5-gnuowen uhci_hcd
647[ 2.602974] usb usb2: SerialNumber: 0000:00:1d.1
648[ 2.603147] hub 2-0:1.0: USB hub found
649[ 2.603158] hub 2-0:1.0: 2 ports detected
650[ 2.603414] uhci_hcd 0000:00:1d.2: setting latency timer to 64
651[ 2.603419] uhci_hcd 0000:00:1d.2: UHCI Host Controller
652[ 2.603426] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
653[ 2.603458] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
654[ 2.603528] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
655[ 2.603532] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
656[ 2.603536] usb usb3: Product: UHCI Host Controller
657[ 2.603539] usb usb3: Manufacturer: Linux 3.12.5-gnuowen uhci_hcd
658[ 2.603542] usb usb3: SerialNumber: 0000:00:1d.2
659[ 2.603676] hub 3-0:1.0: USB hub found
660[ 2.603687] hub 3-0:1.0: 2 ports detected
661[ 2.603943] uhci_hcd 0000:00:1d.3: setting latency timer to 64
662[ 2.603949] uhci_hcd 0000:00:1d.3: UHCI Host Controller
663[ 2.603956] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
664[ 2.604001] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
665[ 2.604094] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
666[ 2.604098] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
667[ 2.604101] usb usb4: Product: UHCI Host Controller
668[ 2.604105] usb usb4: Manufacturer: Linux 3.12.5-gnuowen uhci_hcd
669[ 2.604108] usb usb4: SerialNumber: 0000:00:1d.3
670[ 2.604249] hub 4-0:1.0: USB hub found
671[ 2.604261] hub 4-0:1.0: 2 ports detected
672[ 2.605161] ehci-pci 0000:00:1d.7: setting latency timer to 64
673[ 2.605857] ehci-pci 0000:00:1d.7: EHCI Host Controller
674[ 2.605866] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
675[ 2.605886] ehci-pci 0000:00:1d.7: debug port 1
676[ 2.608016] cfg80211: Calling CRDA to update world regulatory domain
677[ 2.610152] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
678[ 2.610167] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4444000
679[ 2.617191] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
680[ 2.617261] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
681[ 2.617265] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
682[ 2.617269] usb usb5: Product: EHCI Host Controller
683[ 2.617273] usb usb5: Manufacturer: Linux 3.12.5-gnuowen ehci_hcd
684[ 2.617276] usb usb5: SerialNumber: 0000:00:1d.7
685[ 2.617462] hub 5-0:1.0: USB hub found
686[ 2.617474] hub 5-0:1.0: 8 ports detected
687[ 2.638113] hub 1-0:1.0: USB hub found
688[ 2.638128] hub 1-0:1.0: 2 ports detected
689[ 2.652105] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
690[ 2.659160] hub 2-0:1.0: USB hub found
691[ 2.659302] hub 2-0:1.0: 2 ports detected
692[ 2.660155] Non-volatile memory driver v1.3
693[ 2.664051] thinkpad_acpi: tpacpi_acpi_handle_locate: Found ACPI handle for ec
694[ 2.664057] thinkpad_acpi: ThinkPad ACPI Extras v0.24
695[ 2.664059] thinkpad_acpi: http://ibm-acpi.sf.net/
696[ 2.664062] thinkpad_acpi: ThinkPad BIOS x60, EC unknown
697[ 2.666539] thinkpad_acpi: tpacpi_acpi_handle_locate: Found ACPI handle for video
698[ 2.666543] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
699[ 2.666545] thinkpad_acpi: ibm_init: probing for driver
700[ 2.666548] thinkpad_acpi: ibm_init: driver installed
701[ 2.666552] thinkpad_acpi: ibm_init: probing for hotkey
702[ 2.666558] thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
703[ 2.666609] thinkpad_acpi: hotkey_init: using keymap number 1
704[ 2.666613] thinkpad_acpi: hotkey_init: enabling firmware HKEY event interface...
705[ 2.668225] thinkpad_acpi: register_tpacpi_subdriver: registering hotkey as an ACPI driver
706[ 2.674192] ACPI: Battery Slot [BAT0] (battery present)
707[ 2.674307] ACPI: Battery Slot [BAT1] (battery absent)
708[ 2.674626] thinkpad_acpi: ibm_init: hotkey installed
709[ 2.674633] thinkpad_acpi: ibm_init: probing for bluetooth
710[ 2.674640] thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
711[ 2.674645] thinkpad_acpi: ibm_init: probing for wan
712[ 2.674649] thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
713[ 2.674653] thinkpad_acpi: ibm_init: probing for uwb
714[ 2.674657] thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
715[ 2.674660] thinkpad_acpi: ibm_init: probing for video
716[ 2.674670] thinkpad_acpi: ibm_init: probing for light
717[ 2.674677] thinkpad_acpi: ibm_init: probing for cmos
718[ 2.674684] thinkpad_acpi: ibm_init: probing for led
719[ 2.674756] thinkpad_acpi: ibm_init: led installed
720[ 2.674761] thinkpad_acpi: ibm_init: probing for beep
721[ 2.674765] thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle BEEP for beep
722[ 2.674767] thinkpad_acpi: ibm_init: beep installed
723[ 2.674771] thinkpad_acpi: ibm_init: probing for thermal
724[ 2.674775] thinkpad_acpi: ibm_init: probing for brightness
725[ 2.674778] thinkpad_acpi: brightness_init: driver auto-selected brightness_mode=2
726[ 2.674809] thinkpad_acpi: brightness_update_status: backlight: attempt to set level to 0
727[ 2.676102] thinkpad_acpi: ibm_init: brightness installed
728[ 2.676108] thinkpad_acpi: ibm_init: probing for volume
729[ 2.676111] thinkpad_acpi: volume_init: driver auto-selected volume_mode=3
730[ 2.676394] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
731[ 2.677638] thinkpad_acpi: ibm_init: volume installed
732[ 2.677642] thinkpad_acpi: ibm_init: probing for fan
733[ 2.680104] hub 3-0:1.0: USB hub found
734[ 2.680117] hub 3-0:1.0: 2 ports detected
735[ 2.681093] thinkpad_acpi: ibm_init: fan installed
736[ 2.681167] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
737[ 2.691981] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:b4:2f:e2
738[ 2.691987] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
739[ 2.692067] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
740[ 2.701117] hub 4-0:1.0: USB hub found
741[ 2.701131] hub 4-0:1.0: 2 ports detected
742[ 2.701426] hda_intel: probe_mask set to 0x1 for device 17aa:2010
743[ 2.701480] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
744[ 2.731035] ath: phy0: Enable LNA combining
745[ 2.734845] input: PC Speaker as /devices/platform/pcspkr/input/input7
746[ 2.735215] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54
747[ 2.735218] microcode: Missing Free firmware
748[ 2.749742] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
749[ 2.749869] ath: EEPROM regdomain: 0x65
750[ 2.749871] ath: EEPROM indicates we should expect a direct regpair map
751[ 2.749875] ath: Country alpha2 being used: 00
752[ 2.749877] ath: Regpair used: 0x65
753[ 2.750392] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
754[ 2.750489] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
755[ 2.750579] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
756[ 2.750666] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
757[ 2.753590] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
758[ 2.753600] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
759[ 2.766273] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
760[ 2.766608] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8ce0000, irq=17
761[ 2.775209] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
762[ 2.775215] yenta_cardbus 0000:05:00.0: Socket status: 30000006
763[ 2.775221] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #06 to #09
764[ 2.775232] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io 0x2000-0x3fff]
765[ 2.775237] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
766[ 2.775241] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
767[ 2.775255] excluding 0xe1ef0000-0xe20fffff
768[ 2.775262] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
769[ 2.775266] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
770[ 2.775296] excluding 0xe2100000-0xe40fffff
771[ 2.828441] microcode: CPU1 sig=0x6ec, pf=0x20, revision=0x54
772[ 2.828447] microcode: Missing Free firmware
773[ 2.834069] firewire_ohci 0000:05:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
774[ 2.856139] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
775[ 2.903194] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
776[ 2.903223] excluding 0xf0000-0xfffff
777[ 2.903249] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
778[ 2.903282] clean.
779[ 2.903305] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
780[ 2.903336] excluding 0x60000000-0x60ffffff
781[ 2.913189] systemd-udevd[352]: renamed network interface eth0 to eth1
782[ 2.924372] cfg80211: World regulatory domain updated:
783[ 2.924442] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
784[ 2.924446] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
785[ 2.924449] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
786[ 2.924452] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
787[ 2.924455] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
788[ 2.924458] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
789[ 3.243400] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
790[ 3.264096] Adding 2097148k swap on /dev/sda2. Priority:0 extents:1 across:2097148k SS
791[ 3.284725] EXT4-fs (sda1): re-mounted. Opts: (null)
792[ 3.336535] firewire_core 0000:05:00.1: created device fw0: GUID 0000000000000000, S400
793[ 3.348227] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
794[ 3.381061] usb 4-1: new full-speed USB device number 2 using uhci_hcd
795[ 3.521747] fuse init (API version 7.22)
796[ 3.535749] bio: create slab <bio-1> at 1
797[ 3.548081] usb 4-1: New USB device found, idVendor=0483, idProduct=2016
798[ 3.548087] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
799[ 3.548091] usb 4-1: Product: Biometric Coprocessor
800[ 3.548094] usb 4-1: Manufacturer: STMicroelectronics
801[ 3.597539] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
802[ 3.618294] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8
803[ 5.320995] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
804[ 6.185196] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
805[ 6.286106] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
806[ 6.286598] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
807[ 6.304527] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
808[ 6.694360] Bluetooth: Core ver 2.16
809[ 6.694384] NET: Registered protocol family 31
810[ 6.694387] Bluetooth: HCI device and connection manager initialized
811[ 6.694399] Bluetooth: HCI socket layer initialized
812[ 6.694403] Bluetooth: L2CAP socket layer initialized
813[ 6.694412] Bluetooth: SCO socket layer initialized
814[ 6.703089] Bluetooth: RFCOMM TTY layer initialized
815[ 6.703107] Bluetooth: RFCOMM socket layer initialized
816[ 6.703109] Bluetooth: RFCOMM ver 1.11
817[ 6.703811] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
818[ 6.703815] Bluetooth: BNEP filters: protocol multicast
819[ 6.703823] Bluetooth: BNEP socket layer initialized
820[ 6.991189] lp: driver loaded but no devices found
821[ 7.009755] ppdev: user-space parallel port driver
822[ 7.079193] thinkpad_acpi: brightness_update_status: backlight: attempt to set level to 0
823[ 7.079255] thinkpad_acpi: brightness_update_status: backlight: attempt to set level to 0
824[ 7.529691] Ebtables v2.0 registered
825[ 7.554240] ip_tables: (C) 2000-2006 Netfilter Core Team
826[ 7.577151] ip6_tables: (C) 2000-2006 Netfilter Core Team
827[ 8.044341] systemd-logind[3191]: New seat seat0.
828[ 8.046893] systemd-logind[3191]: Watching system buttons on /dev/input/event2 (Power Button)
829[ 8.048894] systemd-logind[3191]: Watching system buttons on /dev/input/event3 (Video Bus)
830[ 8.049059] systemd-logind[3191]: Watching system buttons on /dev/input/event1 (Lid Switch)
831[ 8.049185] systemd-logind[3191]: Watching system buttons on /dev/input/event0 (Sleep Button)
832[ 8.050090] systemd-logind[3191]: Watching system buttons on /dev/input/event5 (ThinkPad Extra Buttons)
833[ 8.051507] systemd-logind[3191]: New session 1 of user Debian-gdm.
834[ 8.051658] systemd-logind[3191]: Linked /tmp/.X11-unix/X0 to /run/user/118/X11-display.
835[ 8.180095] wlan0: authenticate with 00:1d:73:b4:6e:2f
836[ 8.196499] wlan0: send auth to 00:1d:73:b4:6e:2f (try 1/3)
837[ 8.199026] wlan0: authenticated
838[ 8.201050] wlan0: associate with 00:1d:73:b4:6e:2f (try 1/3)
839[ 8.204039] wlan0: RX AssocResp from 00:1d:73:b4:6e:2f (capab=0x401 status=0 aid=3)
840[ 8.204380] wlan0: associated
841[ 8.204413] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
842[ 145.098397] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard
843[ 145.106553] systemd-logind[3191]: New session 2 of user sam.
844[ 145.106708] systemd-logind[3191]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
845[ 509.978154] systemd-logind[3191]: Removed session 1.
846[ 1457.543921] systemd-logind[3191]: New session c1 of user sam.
847[ 1462.522153] systemd-logind[3191]: Removed session c1.
848[ 1462.522749] systemd-logind[3191]: New session c2 of user sam.