persmule | 5e75557 | 2017-07-28 23:14:51 +0800 | [diff] [blame] | 1 | [ 0.000000] Linux version 4.11.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19) |
| 2 | [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=e003fde5-6992-4a84-89f4-69eba1314d2d ro quiet iomem=relaxed |
| 3 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| 4 | [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| 5 | [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| 8 | [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb22fff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x000000007fb23000-0x000000007fbfffff] type 16 |
| 12 | [ 0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved |
| 13 | [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| 14 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable |
| 15 | [ 0.000000] NX (Execute Disable) protection: active |
| 16 | [ 0.000000] SMBIOS 2.7 present. |
| 17 | [ 0.000000] DMI: LENOVO 2815H11/2815H11, BIOS CBET4000 4.6-891-gca74434a8a-dirty 07/28/2017 |
| 18 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 19 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 20 | [ 0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000 |
| 21 | [ 0.000000] MTRR default type: write-back |
| 22 | [ 0.000000] MTRR fixed ranges enabled: |
| 23 | [ 0.000000] 00000-9FFFF write-back |
| 24 | [ 0.000000] A0000-BFFFF uncachable |
| 25 | [ 0.000000] C0000-FFFFF write-back |
| 26 | [ 0.000000] MTRR variable ranges enabled: |
| 27 | [ 0.000000] 0 base 07FC00000 mask FFFC00000 uncachable |
| 28 | [ 0.000000] 1 base 080000000 mask FC0000000 uncachable |
| 29 | [ 0.000000] 2 base 0C0000000 mask FF0000000 uncachable |
| 30 | [ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining |
| 31 | [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable |
| 32 | [ 0.000000] 5 disabled |
| 33 | [ 0.000000] 6 disabled |
| 34 | [ 0.000000] 7 disabled |
| 35 | [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| 36 | [ 0.000000] e820: last_pfn = 0x7fb23 max_arch_pfn = 0x400000000 |
| 37 | [ 0.000000] found SMP MP-table at [mem 0x000f6170-0x000f617f] mapped at [ffff92d0c00f6170] |
| 38 | [ 0.000000] Base memory trampoline at [ffff92d0c0099000] 99000 size 24576 |
| 39 | [ 0.000000] BRK [0x60741000, 0x60741fff] PGTABLE |
| 40 | [ 0.000000] BRK [0x60742000, 0x60742fff] PGTABLE |
| 41 | [ 0.000000] BRK [0x60743000, 0x60743fff] PGTABLE |
| 42 | [ 0.000000] BRK [0x60744000, 0x60744fff] PGTABLE |
| 43 | [ 0.000000] BRK [0x60745000, 0x60745fff] PGTABLE |
| 44 | [ 0.000000] BRK [0x60746000, 0x60746fff] PGTABLE |
| 45 | [ 0.000000] BRK [0x60747000, 0x60747fff] PGTABLE |
| 46 | [ 0.000000] BRK [0x60748000, 0x60748fff] PGTABLE |
| 47 | [ 0.000000] BRK [0x60749000, 0x60749fff] PGTABLE |
| 48 | [ 0.000000] BRK [0x6074a000, 0x6074afff] PGTABLE |
| 49 | [ 0.000000] RAMDISK: [mem 0x35c53000-0x36e20fff] |
| 50 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 51 | [ 0.000000] ACPI: RSDP 0x00000000000F64B0 000024 (v02 CORE ) |
| 52 | [ 0.000000] ACPI: XSDT 0x000000007FB340E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 53 | [ 0.000000] ACPI: FACP 0x000000007FB37840 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000) |
| 54 | [ 0.000000] ACPI: DSDT 0x000000007FB34280 0035B5 (v03 COREv4 COREBOOT 20090419 INTL 20161222) |
| 55 | [ 0.000000] ACPI: FACS 0x000000007FB34240 000040 |
| 56 | [ 0.000000] ACPI: SSDT 0x000000007FB37940 00058D (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 57 | [ 0.000000] ACPI: MCFG 0x000000007FB37ED0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 58 | [ 0.000000] ACPI: TCPA 0x000000007FB37F10 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 59 | [ 0.000000] ACPI: APIC 0x000000007FB37F50 000068 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 60 | [ 0.000000] ACPI: DMAR 0x000000007FB37FC0 000078 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 61 | [ 0.000000] ACPI: HPET 0x000000007FB38040 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 62 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 63 | [ 0.000000] No NUMA configuration found |
| 64 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff] |
| 65 | [ 0.000000] NODE_DATA(0) allocated [mem 0x26fff9000-0x26fffdfff] |
| 66 | [ 0.000000] Zone ranges: |
| 67 | [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| 68 | [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| 69 | [ 0.000000] Normal [mem 0x0000000100000000-0x000000026fffffff] |
| 70 | [ 0.000000] Device empty |
| 71 | [ 0.000000] Movable zone start for each node |
| 72 | [ 0.000000] Early memory node ranges |
| 73 | [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| 74 | [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fb22fff] |
| 75 | [ 0.000000] node 0: [mem 0x0000000100000000-0x000000026fffffff] |
| 76 | [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff] |
| 77 | [ 0.000000] On node 0 totalpages: 2030274 |
| 78 | [ 0.000000] DMA zone: 64 pages used for memmap |
| 79 | [ 0.000000] DMA zone: 22 pages reserved |
| 80 | [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| 81 | [ 0.000000] DMA32 zone: 8109 pages used for memmap |
| 82 | [ 0.000000] DMA32 zone: 518947 pages, LIFO batch:31 |
| 83 | [ 0.000000] Normal zone: 23552 pages used for memmap |
| 84 | [ 0.000000] Normal zone: 1507328 pages, LIFO batch:31 |
| 85 | [ 0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff |
| 86 | [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| 87 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 88 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 89 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| 90 | [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| 91 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) |
| 92 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 93 | [ 0.000000] ACPI: IRQ0 used by override. |
| 94 | [ 0.000000] ACPI: IRQ9 used by override. |
| 95 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 96 | [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 |
| 97 | [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| 98 | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| 99 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff] |
| 100 | [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] |
| 101 | [ 0.000000] PM: Registered nosave memory: [mem 0x7fb23000-0x7fbfffff] |
| 102 | [ 0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff] |
| 103 | [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff] |
| 104 | [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| 105 | [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff] |
| 106 | [ 0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices |
| 107 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 108 | [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| 109 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| 110 | [ 0.000000] percpu: Embedded 37 pages/cpu @ffff92d32fc00000 s111512 r8192 d31848 u1048576 |
| 111 | [ 0.000000] pcpu-alloc: s111512 r8192 d31848 u1048576 alloc=1*2097152 |
| 112 | [ 0.000000] pcpu-alloc: [0] 0 1 |
| 113 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1998527 |
| 114 | [ 0.000000] Policy zone: Normal |
| 115 | [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=e003fde5-6992-4a84-89f4-69eba1314d2d ro quiet iomem=relaxed |
| 116 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 117 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 118 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 119 | [ 0.000000] Memory: 7893800K/8121096K available (6464K kernel code, 1175K rwdata, 2788K rodata, 1436K init, 684K bss, 227296K reserved, 0K cma-reserved) |
| 120 | [ 0.000000] Hierarchical RCU implementation. |
| 121 | [ 0.000000] Build-time adjustment of leaf fanout to 64. |
| 122 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. |
| 123 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 |
| 124 | [ 0.000000] NR_IRQS:33024 nr_irqs:440 16 |
| 125 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 126 | [ 0.000000] Console: colour dummy device 80x25 |
| 127 | [ 0.000000] console [tty0] enabled |
| 128 | [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| 129 | [ 0.000000] hpet clockevent registered |
| 130 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 131 | [ 0.004000] tsc: Detected 2533.383 MHz processor |
| 132 | [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.76 BogoMIPS (lpj=10133532) |
| 133 | [ 0.004000] pid_max: default: 32768 minimum: 301 |
| 134 | [ 0.004000] ACPI: Core revision 20170119 |
| 135 | [ 0.011005] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| 136 | [ 0.011088] Security Framework initialized |
| 137 | [ 0.011091] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 138 | [ 0.011102] AppArmor: AppArmor disabled by boot time parameter |
| 139 | [ 0.011969] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| 140 | [ 0.016373] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 141 | [ 0.018503] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 142 | [ 0.018519] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 143 | [ 0.019003] CPU: Physical Processor ID: 0 |
| 144 | [ 0.019004] CPU: Processor Core ID: 0 |
| 145 | [ 0.019007] mce: CPU supports 6 MCE banks |
| 146 | [ 0.019017] CPU0: Thermal monitoring enabled (TM2) |
| 147 | [ 0.019021] process: using mwait in idle threads |
| 148 | [ 0.019027] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 |
| 149 | [ 0.019029] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 |
| 150 | [ 0.019214] Freeing SMP alternatives memory: 24K |
| 151 | [ 0.024027] ftrace: allocating 25929 entries in 102 pages |
| 152 | [ 0.036119] smpboot: Max logical packages: 1 |
| 153 | [ 0.036132] DMAR: Host address width 36 |
| 154 | [ 0.036134] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| 155 | [ 0.036142] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000 |
| 156 | [ 0.036143] DMAR: DRHD base: 0x000000fed91000 flags: 0x0 |
| 157 | [ 0.036149] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000 |
| 158 | [ 0.036151] DMAR: DRHD base: 0x000000fed93000 flags: 0x1 |
| 159 | [ 0.036156] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000 |
| 160 | [ 0.036536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| 161 | [ 0.080000] smpboot: CPU0: Intel(R) Core(TM)2 CPU P9600 @ 2.53GHz (family: 0x6, model: 0x17, stepping: 0xa) |
| 162 | [ 0.080000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. |
| 163 | [ 0.080000] ... version: 2 |
| 164 | [ 0.080000] ... bit width: 40 |
| 165 | [ 0.080000] ... generic registers: 2 |
| 166 | [ 0.080000] ... value mask: 000000ffffffffff |
| 167 | [ 0.080000] ... max period: 000000007fffffff |
| 168 | [ 0.080000] ... fixed-purpose events: 3 |
| 169 | [ 0.080000] ... event mask: 0000000700000003 |
| 170 | [ 0.080000] smp: Bringing up secondary CPUs ... |
| 171 | [ 0.080000] x86: Booting SMP configuration: |
| 172 | [ 0.080000] .... node #0, CPUs: #1 |
| 173 | [ 0.166034] smp: Brought up 1 node, 2 CPUs |
| 174 | [ 0.166034] smpboot: Total of 2 processors activated (10133.62 BogoMIPS) |
| 175 | [ 0.166034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 176 | [ 0.168095] sched_clock: Marking stable (168000000, 0)->(284264437, -116264437) |
| 177 | [ 0.168627] devtmpfs: initialized |
| 178 | [ 0.168720] x86/mm: Memory block size: 128MB |
| 179 | [ 0.174146] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| 180 | [ 0.174158] futex hash table entries: 512 (order: 3, 32768 bytes) |
| 181 | [ 0.174225] pinctrl core: initialized pinctrl subsystem |
| 182 | [ 0.174394] NET: Registered protocol family 16 |
| 183 | [ 0.174709] cpuidle: using governor ladder |
| 184 | [ 0.174749] cpuidle: using governor menu |
| 185 | [ 0.174752] PCCT header not found. |
| 186 | [ 0.174789] ACPI: bus type PCI registered |
| 187 | [ 0.174791] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 188 | [ 0.174885] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| 189 | [ 0.174888] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| 190 | [ 0.174901] PCI: Using configuration type 1 for base access |
| 191 | [ 0.176548] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 192 | [ 0.176869] ACPI: Added _OSI(Module Device) |
| 193 | [ 0.176870] ACPI: Added _OSI(Processor Device) |
| 194 | [ 0.176872] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 195 | [ 0.176873] ACPI: Added _OSI(Processor Aggregator Device) |
| 196 | [ 0.177083] ACPI: Executed 1 blocks of module-level executable AML code |
| 197 | [ 0.178686] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored |
| 198 | [ 0.180233] ACPI : EC: EC started |
| 199 | [ 0.180234] ACPI : EC: interrupt blocked |
| 200 | [ 0.180336] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| 201 | [ 0.180339] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| 202 | [ 0.180341] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| 203 | [ 0.180342] ACPI: Interpreter enabled |
| 204 | [ 0.180369] ACPI: (supports S0 S3 S4 S5) |
| 205 | [ 0.180371] ACPI: Using IOAPIC for interrupt routing |
| 206 | [ 0.180404] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 207 | [ 0.193290] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1) |
| 208 | [ 0.193784] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 209 | [ 0.193790] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 210 | [ 0.193864] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 211 | [ 0.193877] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| 212 | [ 0.193951] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff]) |
| 213 | [ 0.194267] PCI host bridge to bus 0000:00 |
| 214 | [ 0.194270] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| 215 | [ 0.194272] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| 216 | [ 0.194274] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| 217 | [ 0.194276] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| 218 | [ 0.194279] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| 219 | [ 0.194281] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| 220 | [ 0.194283] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| 221 | [ 0.194286] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| 222 | [ 0.194288] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| 223 | [ 0.194290] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| 224 | [ 0.194292] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| 225 | [ 0.194294] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| 226 | [ 0.194296] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| 227 | [ 0.194298] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| 228 | [ 0.194300] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| 229 | [ 0.194302] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window] |
| 230 | [ 0.194305] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| 231 | [ 0.194307] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 232 | [ 0.194319] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 |
| 233 | [ 0.194348] DMAR: Forcing write-buffer flush capability |
| 234 | [ 0.194349] DMAR: Disabling IOMMU for graphics on this chipset |
| 235 | [ 0.194487] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 |
| 236 | [ 0.194501] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit] |
| 237 | [ 0.194510] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| 238 | [ 0.194517] pci 0000:00:02.0: reg 0x20: [io 0x3400-0x3407] |
| 239 | [ 0.194661] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 |
| 240 | [ 0.194674] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit] |
| 241 | [ 0.194868] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000 |
| 242 | [ 0.194892] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff] |
| 243 | [ 0.194905] pci 0000:00:19.0: reg 0x14: [mem 0xe1b24000-0xe1b24fff] |
| 244 | [ 0.194917] pci 0000:00:19.0: reg 0x18: [io 0x3000-0x301f] |
| 245 | [ 0.195012] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| 246 | [ 0.195137] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 |
| 247 | [ 0.195197] pci 0000:00:1a.0: reg 0x20: [io 0x3020-0x303f] |
| 248 | [ 0.195347] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| 249 | [ 0.195409] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 |
| 250 | [ 0.195473] pci 0000:00:1a.1: reg 0x20: [io 0x3040-0x305f] |
| 251 | [ 0.195621] pci 0000:00:1a.1: System wakeup disabled by ACPI |
| 252 | [ 0.195683] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 |
| 253 | [ 0.195743] pci 0000:00:1a.2: reg 0x20: [io 0x3060-0x307f] |
| 254 | [ 0.195889] pci 0000:00:1a.2: System wakeup disabled by ACPI |
| 255 | [ 0.195962] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 |
| 256 | [ 0.195986] pci 0000:00:1a.7: reg 0x10: [mem 0xe1b26000-0xe1b263ff] |
| 257 | [ 0.196101] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold |
| 258 | [ 0.196179] pci 0000:00:1a.7: System wakeup disabled by ACPI |
| 259 | [ 0.196242] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 |
| 260 | [ 0.196268] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b20000-0xe1b23fff 64bit] |
| 261 | [ 0.196385] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| 262 | [ 0.196473] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| 263 | [ 0.196534] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 |
| 264 | [ 0.196651] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| 265 | [ 0.196795] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 |
| 266 | [ 0.196912] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| 267 | [ 0.197056] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 |
| 268 | [ 0.197164] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| 269 | [ 0.197306] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 |
| 270 | [ 0.197422] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| 271 | [ 0.197573] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 |
| 272 | [ 0.197634] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f] |
| 273 | [ 0.197780] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| 274 | [ 0.197840] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 |
| 275 | [ 0.197900] pci 0000:00:1d.1: reg 0x20: [io 0x30a0-0x30bf] |
| 276 | [ 0.198047] pci 0000:00:1d.1: System wakeup disabled by ACPI |
| 277 | [ 0.198108] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 |
| 278 | [ 0.198167] pci 0000:00:1d.2: reg 0x20: [io 0x30c0-0x30df] |
| 279 | [ 0.198314] pci 0000:00:1d.2: System wakeup disabled by ACPI |
| 280 | [ 0.198383] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 |
| 281 | [ 0.198408] pci 0000:00:1d.7: reg 0x10: [mem 0xe1b27000-0xe1b273ff] |
| 282 | [ 0.198522] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold |
| 283 | [ 0.198600] pci 0000:00:1d.7: System wakeup disabled by ACPI |
| 284 | [ 0.198658] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 |
| 285 | [ 0.198845] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 |
| 286 | [ 0.199115] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 |
| 287 | [ 0.199140] pci 0000:00:1f.2: reg 0x10: [io 0x3408-0x340f] |
| 288 | [ 0.199153] pci 0000:00:1f.2: reg 0x14: [io 0x3418-0x341b] |
| 289 | [ 0.199165] pci 0000:00:1f.2: reg 0x18: [io 0x3410-0x3417] |
| 290 | [ 0.199177] pci 0000:00:1f.2: reg 0x1c: [io 0x341c-0x341f] |
| 291 | [ 0.199189] pci 0000:00:1f.2: reg 0x20: [io 0x30e0-0x30ff] |
| 292 | [ 0.199201] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b25000-0xe1b257ff] |
| 293 | [ 0.199272] pci 0000:00:1f.2: PME# supported from D3hot |
| 294 | [ 0.199404] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 |
| 295 | [ 0.199428] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b28000-0xe1b280ff 64bit] |
| 296 | [ 0.199460] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| 297 | [ 0.199712] pci 0000:01:00.0: [168c:0030] type 00 class 0x028000 |
| 298 | [ 0.199769] pci 0000:01:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit] |
| 299 | [ 0.199886] pci 0000:01:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref] |
| 300 | [ 0.200036] pci 0000:01:00.0: supports D1 |
| 301 | [ 0.200038] pci 0000:01:00.0: PME# supported from D0 D1 D3hot |
| 302 | [ 0.211503] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 303 | [ 0.211511] pci 0000:00:1c.0: bridge window [mem 0xe1900000-0xe19fffff] |
| 304 | [ 0.211621] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000 |
| 305 | [ 0.211679] pci 0000:02:00.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff 64bit] |
| 306 | [ 0.211795] pci 0000:02:00.0: reg 0x30: [mem 0xe1a20000-0xe1a2ffff pref] |
| 307 | [ 0.211949] pci 0000:02:00.0: supports D1 |
| 308 | [ 0.211951] pci 0000:02:00.0: PME# supported from D0 D1 D3hot |
| 309 | [ 0.223501] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 310 | [ 0.223510] pci 0000:00:1c.1: bridge window [mem 0xe1a00000-0xe1afffff] |
| 311 | [ 0.223586] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| 312 | [ 0.223706] acpiphp: Slot [1] registered |
| 313 | [ 0.223749] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 |
| 314 | [ 0.223794] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0801fff 64bit] |
| 315 | [ 0.224022] pci 0000:04:00.0: PME# supported from D0 D3hot |
| 316 | [ 0.224214] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| 317 | [ 0.224220] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| 318 | [ 0.224225] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff] |
| 319 | [ 0.224233] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| 320 | [ 0.224422] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) |
| 321 | [ 0.224437] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| 322 | [ 0.224439] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| 323 | [ 0.224441] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) |
| 324 | [ 0.224443] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) |
| 325 | [ 0.224446] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) |
| 326 | [ 0.224448] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode) |
| 327 | [ 0.224450] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) |
| 328 | [ 0.224452] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) |
| 329 | [ 0.224455] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) |
| 330 | [ 0.224457] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) |
| 331 | [ 0.224459] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) |
| 332 | [ 0.224461] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) |
| 333 | [ 0.224464] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) |
| 334 | [ 0.224466] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) |
| 335 | [ 0.224468] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) |
| 336 | [ 0.224471] pci 0000:00:1e.0: bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode) |
| 337 | [ 0.224473] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) |
| 338 | [ 0.224686] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 339 | [ 0.224776] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 340 | [ 0.224862] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 341 | [ 0.224948] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 342 | [ 0.225034] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. |
| 343 | [ 0.225121] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled. |
| 344 | [ 0.225206] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. |
| 345 | [ 0.225294] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled. |
| 346 | [ 0.227673] ACPI: Enabled 1 GPEs in block 00 to 3F |
| 347 | [ 0.227817] ACPI : EC: interrupt unblocked |
| 348 | [ 0.227827] ACPI : EC: event unblocked |
| 349 | [ 0.227836] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| 350 | [ 0.227839] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| 351 | [ 0.227955] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| 352 | [ 0.227958] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| 353 | [ 0.227967] pci 0000:00:02.0: vgaarb: bridge control possible |
| 354 | [ 0.227968] vgaarb: loaded |
| 355 | [ 0.228074] PCI: Using ACPI for IRQ routing |
| 356 | [ 0.230582] PCI: pci_cache_line_size set to 64 bytes |
| 357 | [ 0.230690] e820: reserve RAM buffer [mem 0x7fb23000-0x7fffffff] |
| 358 | [ 0.230902] HPET: 4 timers in total, 0 timers will be used for per-cpu timer |
| 359 | [ 0.230908] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 |
| 360 | [ 0.230914] hpet0: 4 comparators, 64-bit 14.318180 MHz counter |
| 361 | [ 0.232993] clocksource: Switched to clocksource hpet |
| 362 | [ 0.251321] VFS: Disk quotas dquot_6.6.0 |
| 363 | [ 0.251362] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 364 | [ 0.251491] pnp: PnP ACPI init |
| 365 | [ 0.251667] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| 366 | [ 0.251669] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved |
| 367 | [ 0.251672] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| 368 | [ 0.251675] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| 369 | [ 0.251678] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| 370 | [ 0.251680] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| 371 | [ 0.251683] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| 372 | [ 0.251685] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| 373 | [ 0.251691] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 374 | [ 0.252390] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| 375 | [ 0.252395] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| 376 | [ 0.252481] system 00:02: [io 0x0800-0x080f] has been reserved |
| 377 | [ 0.252483] system 00:02: [io 0x0500-0x057f] has been reserved |
| 378 | [ 0.252486] system 00:02: [io 0x0580-0x05bf] has been reserved |
| 379 | [ 0.252490] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 380 | [ 0.252531] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 381 | [ 0.252593] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 382 | [ 0.252645] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 383 | [ 0.252800] pnp: PnP ACPI: found 6 devices |
| 384 | [ 0.260493] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| 385 | [ 0.260557] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 386 | [ 0.260566] pci 0000:00:1c.0: bridge window [mem 0xe1900000-0xe19fffff] |
| 387 | [ 0.260577] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 388 | [ 0.260583] pci 0000:00:1c.1: bridge window [mem 0xe1a00000-0xe1afffff] |
| 389 | [ 0.260594] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| 390 | [ 0.260610] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| 391 | [ 0.260613] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] |
| 392 | [ 0.260620] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff] |
| 393 | [ 0.260625] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| 394 | [ 0.260633] pci 0000:00:1e.0: PCI bridge to [bus 05] |
| 395 | [ 0.260649] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| 396 | [ 0.260652] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| 397 | [ 0.260654] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| 398 | [ 0.260656] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| 399 | [ 0.260659] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| 400 | [ 0.260661] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| 401 | [ 0.260663] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| 402 | [ 0.260665] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| 403 | [ 0.260667] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| 404 | [ 0.260669] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| 405 | [ 0.260671] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| 406 | [ 0.260674] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| 407 | [ 0.260676] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| 408 | [ 0.260678] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| 409 | [ 0.260680] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| 410 | [ 0.260682] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window] |
| 411 | [ 0.260684] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| 412 | [ 0.260687] pci_bus 0000:01: resource 1 [mem 0xe1900000-0xe19fffff] |
| 413 | [ 0.260689] pci_bus 0000:02: resource 1 [mem 0xe1a00000-0xe1afffff] |
| 414 | [ 0.260692] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] |
| 415 | [ 0.260694] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff] |
| 416 | [ 0.260696] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| 417 | [ 0.260698] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] |
| 418 | [ 0.260700] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] |
| 419 | [ 0.260702] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] |
| 420 | [ 0.260704] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window] |
| 421 | [ 0.260706] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window] |
| 422 | [ 0.260708] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window] |
| 423 | [ 0.260711] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window] |
| 424 | [ 0.260713] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window] |
| 425 | [ 0.260715] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window] |
| 426 | [ 0.260717] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window] |
| 427 | [ 0.260719] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window] |
| 428 | [ 0.260721] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window] |
| 429 | [ 0.260723] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window] |
| 430 | [ 0.260726] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window] |
| 431 | [ 0.260728] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window] |
| 432 | [ 0.260730] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window] |
| 433 | [ 0.260732] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window] |
| 434 | [ 0.260874] NET: Registered protocol family 2 |
| 435 | [ 0.261156] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| 436 | [ 0.261457] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 437 | [ 0.261929] TCP: Hash tables configured (established 65536 bind 65536) |
| 438 | [ 0.261994] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| 439 | [ 0.262063] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| 440 | [ 0.262188] NET: Registered protocol family 1 |
| 441 | [ 0.262209] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| 442 | [ 0.264827] PCI: CLS 64 bytes, default 64 |
| 443 | [ 0.264895] Unpacking initramfs... |
| 444 | [ 0.795624] Freeing initrd memory: 18232K |
| 445 | [ 0.795817] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 446 | [ 0.795822] software IO TLB [mem 0x7bb23000-0x7fb23000] (64MB) mapped at [ffff92d13bb23000-ffff92d13fb22fff] |
| 447 | [ 0.796368] audit: initializing netlink subsys (disabled) |
| 448 | [ 0.796471] audit: type=2000 audit(1501254524.792:1): state=initialized audit_enabled=0 res=1 |
| 449 | [ 0.796978] workingset: timestamp_bits=40 max_order=21 bucket_order=0 |
| 450 | [ 0.797024] zbud: loaded |
| 451 | [ 0.798205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| 452 | [ 0.798248] io scheduler noop registered |
| 453 | [ 0.798249] io scheduler deadline registered |
| 454 | [ 0.798268] io scheduler cfq registered (default) |
| 455 | [ 0.798269] io scheduler mq-deadline registered |
| 456 | [ 0.799534] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 |
| 457 | [ 0.799565] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 |
| 458 | [ 0.799595] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 |
| 459 | [ 0.799631] pcieport 0000:00:1c.3: Signaling PME with IRQ 27 |
| 460 | [ 0.799678] efifb: probing for efifb |
| 461 | [ 0.799694] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k |
| 462 | [ 0.799696] efifb: mode is 1440x900x32, linelength=5760, pages=1 |
| 463 | [ 0.799697] efifb: scrolling: redraw |
| 464 | [ 0.799699] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| 465 | [ 0.804328] Console: switching to colour frame buffer device 180x56 |
| 466 | [ 0.808772] fb0: EFI VGA frame buffer device |
| 467 | [ 0.808785] intel_idle: does not run on family 6 model 23 |
| 468 | [ 0.817244] Monitor-Mwait will be used to enter C-1 state |
| 469 | [ 0.817251] Monitor-Mwait will be used to enter C-2 state |
| 470 | [ 0.817255] Monitor-Mwait will be used to enter C-3 state |
| 471 | [ 0.817259] sched_clock: Marking unstable (816184134, 997807)<-(933446378, -116264437) |
| 472 | [ 0.817261] tsc: Marking TSC unstable due to TSC halts in idle |
| 473 | [ 0.817650] GHES: HEST is not enabled! |
| 474 | [ 0.817774] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 475 | [ 0.818480] Linux agpgart interface v0.103 |
| 476 | [ 0.818712] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| 477 | [ 0.818713] AMD IOMMUv2 functionality not available on this system |
| 478 | [ 0.818992] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 479 | [ 0.830754] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 480 | [ 0.830760] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 481 | [ 0.830990] mousedev: PS/2 mouse device common for all mice |
| 482 | [ 0.831051] rtc_cmos 00:03: RTC can wake from S4 |
| 483 | [ 0.831247] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| 484 | [ 0.831278] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs |
| 485 | [ 0.831335] ledtrig-cpu: registered to indicate activity on CPUs |
| 486 | [ 0.831686] NET: Registered protocol family 10 |
| 487 | [ 0.832004] Segment Routing with IPv6 |
| 488 | [ 0.832025] mip6: Mobile IPv6 |
| 489 | [ 0.832027] NET: Registered protocol family 17 |
| 490 | [ 0.832030] mpls_gso: MPLS GSO support |
| 491 | [ 0.832262] microcode: sig=0x1067a, pf=0x80, revision=0x0 |
| 492 | [ 0.832339] microcode: Microcode Update Driver: v2.2. |
| 493 | [ 0.832573] registered taskstats version 1 |
| 494 | [ 0.832593] zswap: loaded using pool lzo/zbud |
| 495 | [ 0.832730] ima: No TPM chip found, activating TPM-bypass! (rc=-19) |
| 496 | [ 0.833253] rtc_cmos 00:03: setting system clock to 2017-07-28 15:08:45 UTC (1501254525) |
| 497 | [ 0.833296] PM: Hibernation image not present or could not be loaded. |
| 498 | [ 0.835516] Freeing unused kernel memory: 1436K |
| 499 | [ 0.835517] Write protecting the kernel read-only data: 12288k |
| 500 | [ 0.836471] Freeing unused kernel memory: 1712K |
| 501 | [ 0.841499] Freeing unused kernel memory: 1308K |
| 502 | [ 0.843932] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| 503 | [ 0.846011] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 504 | [ 0.920882] pps_core: LinuxPPS API ver. 1 registered |
| 505 | [ 0.920885] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| 506 | [ 0.921195] PTP clock support registered |
| 507 | [ 0.922978] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| 508 | [ 0.922979] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| 509 | [ 0.923249] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 510 | [ 0.926269] ACPI: bus type USB registered |
| 511 | [ 0.926334] usbcore: registered new interface driver usbfs |
| 512 | [ 0.926348] usbcore: registered new interface driver hub |
| 513 | [ 0.926625] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| 514 | [ 0.927600] thermal LNXTHERM:00: registered as thermal_zone0 |
| 515 | [ 0.927602] ACPI: Thermal Zone [THM0] (56 C) |
| 516 | [ 0.929054] usbcore: registered new device driver usb |
| 517 | [ 0.929101] thermal LNXTHERM:01: registered as thermal_zone1 |
| 518 | [ 0.929102] ACPI: Thermal Zone [THM1] (52 C) |
| 519 | [ 0.929800] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 520 | [ 0.930073] ehci-pci: EHCI PCI platform driver |
| 521 | [ 0.930275] uhci_hcd: USB Universal Host Controller Interface driver |
| 522 | [ 0.947469] xhci_hcd 0000:04:00.0: xHCI Host Controller |
| 523 | [ 0.947483] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1 |
| 524 | [ 0.947718] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 |
| 525 | [ 0.948129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 526 | [ 0.948132] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 527 | [ 0.948134] usb usb1: Product: xHCI Host Controller |
| 528 | [ 0.948136] usb usb1: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd |
| 529 | [ 0.948138] usb usb1: SerialNumber: 0000:04:00.0 |
| 530 | [ 0.948481] hub 1-0:1.0: USB hub found |
| 531 | [ 0.948499] hub 1-0:1.0: 2 ports detected |
| 532 | [ 0.948663] xhci_hcd 0000:04:00.0: xHCI Host Controller |
| 533 | [ 0.948668] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 |
| 534 | [ 0.950971] SCSI subsystem initialized |
| 535 | [ 0.951121] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. |
| 536 | [ 0.951153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 |
| 537 | [ 0.951156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 538 | [ 0.951158] usb usb2: Product: xHCI Host Controller |
| 539 | [ 0.951160] usb usb2: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd |
| 540 | [ 0.951162] usb usb2: SerialNumber: 0000:04:00.0 |
| 541 | [ 0.951317] hub 2-0:1.0: USB hub found |
| 542 | [ 0.951333] hub 2-0:1.0: 2 ports detected |
| 543 | [ 0.953799] libata version 3.00 loaded. |
| 544 | [ 1.127620] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:27:13:b5:a4:cc |
| 545 | [ 1.127622] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| 546 | [ 1.127651] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF |
| 547 | [ 1.127888] ehci-pci 0000:00:1a.7: EHCI Host Controller |
| 548 | [ 1.127897] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3 |
| 549 | [ 1.127913] ehci-pci 0000:00:1a.7: debug port 1 |
| 550 | [ 1.131830] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported |
| 551 | [ 1.131847] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1b26000 |
| 552 | [ 1.145046] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 |
| 553 | [ 1.145125] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| 554 | [ 1.145128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 555 | [ 1.145130] usb usb3: Product: EHCI Host Controller |
| 556 | [ 1.145132] usb usb3: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd |
| 557 | [ 1.145134] usb usb3: SerialNumber: 0000:00:1a.7 |
| 558 | [ 1.145356] hub 3-0:1.0: USB hub found |
| 559 | [ 1.145366] hub 3-0:1.0: 6 ports detected |
| 560 | [ 1.145859] ehci-pci 0000:00:1d.7: EHCI Host Controller |
| 561 | [ 1.145867] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4 |
| 562 | [ 1.145880] ehci-pci 0000:00:1d.7: debug port 1 |
| 563 | [ 1.149807] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported |
| 564 | [ 1.149819] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1b27000 |
| 565 | [ 1.165046] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 |
| 566 | [ 1.165099] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 |
| 567 | [ 1.165101] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 568 | [ 1.165103] usb usb4: Product: EHCI Host Controller |
| 569 | [ 1.165106] usb usb4: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd |
| 570 | [ 1.165108] usb usb4: SerialNumber: 0000:00:1d.7 |
| 571 | [ 1.165288] hub 4-0:1.0: USB hub found |
| 572 | [ 1.165297] hub 4-0:1.0: 6 ports detected |
| 573 | [ 1.165919] uhci_hcd 0000:00:1a.0: UHCI Host Controller |
| 574 | [ 1.165927] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5 |
| 575 | [ 1.165936] uhci_hcd 0000:00:1a.0: detected 2 ports |
| 576 | [ 1.165959] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020 |
| 577 | [ 1.166035] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| 578 | [ 1.166038] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 579 | [ 1.166040] usb usb5: Product: UHCI Host Controller |
| 580 | [ 1.166042] usb usb5: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| 581 | [ 1.166044] usb usb5: SerialNumber: 0000:00:1a.0 |
| 582 | [ 1.166422] hub 5-0:1.0: USB hub found |
| 583 | [ 1.166432] hub 5-0:1.0: 2 ports detected |
| 584 | [ 1.166746] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| 585 | [ 1.167647] ahci 0000:00:1f.2: version 3.0 |
| 586 | [ 1.167890] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| 587 | [ 1.167930] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode |
| 588 | [ 1.167933] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc |
| 589 | [ 1.169102] scsi host0: ahci |
| 590 | [ 1.169315] scsi host1: ahci |
| 591 | [ 1.169616] scsi host2: ahci |
| 592 | [ 1.169768] scsi host3: ahci |
| 593 | [ 1.169950] scsi host4: ahci |
| 594 | [ 1.170101] scsi host5: ahci |
| 595 | [ 1.170177] ata1: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25100 irq 32 |
| 596 | [ 1.170180] ata2: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25180 irq 32 |
| 597 | [ 1.170181] ata3: DUMMY |
| 598 | [ 1.170182] ata4: DUMMY |
| 599 | [ 1.170185] ata5: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25300 irq 32 |
| 600 | [ 1.170187] ata6: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25380 irq 32 |
| 601 | [ 1.170376] uhci_hcd 0000:00:1a.1: UHCI Host Controller |
| 602 | [ 1.170386] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6 |
| 603 | [ 1.170395] uhci_hcd 0000:00:1a.1: detected 2 ports |
| 604 | [ 1.170426] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040 |
| 605 | [ 1.170580] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 |
| 606 | [ 1.170583] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 607 | [ 1.170585] usb usb6: Product: UHCI Host Controller |
| 608 | [ 1.170587] usb usb6: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| 609 | [ 1.170589] usb usb6: SerialNumber: 0000:00:1a.1 |
| 610 | [ 1.170758] hub 6-0:1.0: USB hub found |
| 611 | [ 1.170769] hub 6-0:1.0: 2 ports detected |
| 612 | [ 1.171042] uhci_hcd 0000:00:1a.2: UHCI Host Controller |
| 613 | [ 1.171049] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7 |
| 614 | [ 1.171059] uhci_hcd 0000:00:1a.2: detected 2 ports |
| 615 | [ 1.171082] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060 |
| 616 | [ 1.171232] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 |
| 617 | [ 1.171235] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 618 | [ 1.171237] usb usb7: Product: UHCI Host Controller |
| 619 | [ 1.171239] usb usb7: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| 620 | [ 1.171241] usb usb7: SerialNumber: 0000:00:1a.2 |
| 621 | [ 1.171411] hub 7-0:1.0: USB hub found |
| 622 | [ 1.171423] hub 7-0:1.0: 2 ports detected |
| 623 | [ 1.171700] uhci_hcd 0000:00:1d.0: UHCI Host Controller |
| 624 | [ 1.171708] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8 |
| 625 | [ 1.171716] uhci_hcd 0000:00:1d.0: detected 2 ports |
| 626 | [ 1.171738] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 |
| 627 | [ 1.171866] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 |
| 628 | [ 1.171869] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 629 | [ 1.171871] usb usb8: Product: UHCI Host Controller |
| 630 | [ 1.171873] usb usb8: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| 631 | [ 1.171875] usb usb8: SerialNumber: 0000:00:1d.0 |
| 632 | [ 1.172038] hub 8-0:1.0: USB hub found |
| 633 | [ 1.172049] hub 8-0:1.0: 2 ports detected |
| 634 | [ 1.172324] uhci_hcd 0000:00:1d.1: UHCI Host Controller |
| 635 | [ 1.172332] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9 |
| 636 | [ 1.172341] uhci_hcd 0000:00:1d.1: detected 2 ports |
| 637 | [ 1.172363] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0 |
| 638 | [ 1.172491] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 |
| 639 | [ 1.172494] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 640 | [ 1.172496] usb usb9: Product: UHCI Host Controller |
| 641 | [ 1.172498] usb usb9: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| 642 | [ 1.172500] usb usb9: SerialNumber: 0000:00:1d.1 |
| 643 | [ 1.172663] hub 9-0:1.0: USB hub found |
| 644 | [ 1.172673] hub 9-0:1.0: 2 ports detected |
| 645 | [ 1.172951] uhci_hcd 0000:00:1d.2: UHCI Host Controller |
| 646 | [ 1.172959] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10 |
| 647 | [ 1.172969] uhci_hcd 0000:00:1d.2: detected 2 ports |
| 648 | [ 1.172990] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0 |
| 649 | [ 1.173072] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 |
| 650 | [ 1.173074] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 651 | [ 1.173076] usb usb10: Product: UHCI Host Controller |
| 652 | [ 1.173078] usb usb10: Manufacturer: Linux 4.11.0-1-amd64 uhci_hcd |
| 653 | [ 1.173080] usb usb10: SerialNumber: 0000:00:1d.2 |
| 654 | [ 1.173242] hub 10-0:1.0: USB hub found |
| 655 | [ 1.173251] hub 10-0:1.0: 2 ports detected |
| 656 | [ 1.477260] random: fast init done |
| 657 | [ 1.484792] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 658 | [ 1.485035] ata1.00: CFA: LEXAR CFAST 32GB CARD, 20141204, max UDMA/133 |
| 659 | [ 1.485037] ata1.00: 62533296 sectors, multi 1: LBA48 |
| 660 | [ 1.485810] ata1.00: configured for UDMA/133 |
| 661 | [ 1.486073] scsi 0:0:0:0: Direct-Access ATA LEXAR CFAST 32GB 1204 PQ: 0 ANSI: 5 |
| 662 | [ 1.669075] usb 6-1: new full-speed USB device number 2 using uhci_hcd |
| 663 | [ 1.786856] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] |
| 664 | [ 1.825024] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x24846984051, max_idle_ns: 440795208863 ns |
| 665 | [ 1.832987] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 666 | [ 1.837280] ata2.00: ATA-8: WDC WD7500BPKX-00HPJT0, 01.01A01, max UDMA/133 |
| 667 | [ 1.837282] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| 668 | [ 1.842290] ata2.00: configured for UDMA/133 |
| 669 | [ 1.842548] scsi 1:0:0:0: Direct-Access ATA WDC WD7500BPKX-0 1A01 PQ: 0 ANSI: 5 |
| 670 | [ 1.855096] usb 6-1: New USB device found, idVendor=147e, idProduct=2016 |
| 671 | [ 1.855099] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 672 | [ 1.855101] usb 6-1: Product: Biometric Coprocessor |
| 673 | [ 1.855103] usb 6-1: Manufacturer: UPEK |
| 674 | [ 1.867898] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367 |
| 675 | [ 1.867904] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| 676 | [ 1.919732] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| 677 | [ 2.196864] ata5: SATA link down (SStatus 0 SControl 300) |
| 678 | [ 2.512598] ata6: SATA link down (SStatus 0 SControl 300) |
| 679 | [ 2.516364] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/699 GiB) |
| 680 | [ 2.516367] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| 681 | [ 2.516397] sd 1:0:0:0: [sdb] Write Protect is off |
| 682 | [ 2.516399] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| 683 | [ 2.516454] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) |
| 684 | [ 2.516467] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 685 | [ 2.516486] sd 0:0:0:0: [sda] Write Protect is off |
| 686 | [ 2.516488] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 687 | [ 2.516624] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 688 | [ 2.518043] sda: sda2 sda3 sda4 < sda5 sda6 sda7 > |
| 689 | [ 2.518823] sd 0:0:0:0: [sda] Attached SCSI removable disk |
| 690 | [ 2.569277] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 |
| 691 | [ 2.570707] sd 1:0:0:0: [sdb] Attached SCSI disk |
| 692 | [ 2.661055] usb 6-2: new full-speed USB device number 3 using uhci_hcd |
| 693 | [ 2.713556] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| 694 | [ 2.996162] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| 695 | [ 3.057097] usb 6-2: New USB device found, idVendor=0a5c, idProduct=21e6 |
| 696 | [ 3.057100] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 697 | [ 3.057102] usb 6-2: Product: BCM20702A0 |
| 698 | [ 3.057104] usb 6-2: Manufacturer: Broadcom Corp |
| 699 | [ 3.057106] usb 6-2: SerialNumber: 2CD05A7F8FF1 |
| 700 | [ 3.212123] PM: Starting manual resume from disk |
| 701 | [ 3.212128] PM: Hibernation image partition 8:18 present |
| 702 | [ 3.212129] PM: Looking for hibernation image. |
| 703 | [ 3.212288] PM: Image not found (code -22) |
| 704 | [ 3.212289] PM: Hibernation image not present or could not be loaded. |
| 705 | [ 3.269044] usb 3-5: new high-speed USB device number 4 using ehci-pci |
| 706 | [ 3.362613] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) |
| 707 | [ 3.417426] usb 3-5: New USB device found, idVendor=17ef, idProduct=100a |
| 708 | [ 3.417429] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 709 | [ 3.417692] hub 3-5:1.0: USB hub found |
| 710 | [ 3.417792] hub 3-5:1.0: 6 ports detected |
| 711 | [ 3.521649] ip_tables: (C) 2000-2006 Netfilter Core Team |
| 712 | [ 3.529656] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) |
| 713 | [ 3.529829] systemd[1]: Detected architecture x86-64. |
| 714 | [ 3.530073] systemd[1]: Set hostname to <universi-hp8460>. |
| 715 | [ 3.537047] usb 3-6: new high-speed USB device number 5 using ehci-pci |
| 716 | [ 3.694671] usb 3-6: New USB device found, idVendor=17ef, idProduct=480d |
| 717 | [ 3.694674] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 718 | [ 3.694677] usb 3-6: Product: Integrated Camera |
| 719 | [ 3.694679] usb 3-6: Manufacturer: Chicony Electronics Co., Ltd. |
| 720 | [ 3.729905] systemd[1]: Created slice User and Session Slice. |
| 721 | [ 3.730022] systemd[1]: Listening on Journal Socket (/dev/log). |
| 722 | [ 3.730133] systemd[1]: Listening on Journal Audit Socket. |
| 723 | [ 3.730362] systemd[1]: Created slice System Slice. |
| 724 | [ 3.731294] systemd[1]: Mounting Kernel Debug File System... |
| 725 | [ 3.732366] systemd[1]: Mounting POSIX Message Queue File System... |
| 726 | [ 3.733452] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. |
| 727 | [ 3.755606] EXT4-fs (sda5): re-mounted. Opts: discard,user_xattr,errors=remount-ro |
| 728 | [ 3.775990] RPC: Registered named UNIX socket transport module. |
| 729 | [ 3.775992] RPC: Registered udp transport module. |
| 730 | [ 3.775993] RPC: Registered tcp transport module. |
| 731 | [ 3.775994] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 732 | [ 3.784398] lp: driver loaded but no devices found |
| 733 | [ 3.802085] ppdev: user-space parallel port driver |
| 734 | [ 4.046287] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input4 |
| 735 | [ 4.046294] ACPI: Sleep Button [SLPB] |
| 736 | [ 4.046539] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input5 |
| 737 | [ 4.046678] ACPI: Lid Switch [LID] |
| 738 | [ 4.046756] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| 739 | [ 4.046759] ACPI: Power Button [PWRF] |
| 740 | [ 4.054220] ACPI: AC Adapter [AC] (on-line) |
| 741 | [ 4.058075] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| 742 | [ 4.060163] acpi device:04: registered as cooling_device2 |
| 743 | [ 4.060312] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 |
| 744 | [ 4.092812] Non-volatile memory driver v1.3 |
| 745 | [ 4.098443] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| 746 | [ 4.098444] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| 747 | [ 4.098444] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-891-gca74434a8a-dirty, EC 6HHT15WW-3.8 |
| 748 | [ 4.098445] thinkpad_acpi: Lenovo ThinkPad T400s, model 2815H11 |
| 749 | [ 4.105329] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| 750 | [ 4.105648] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| 751 | [ 4.105661] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| 752 | [ 4.105661] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| 753 | [ 4.109692] ACPI: Battery Slot [BAT0] (battery present) |
| 754 | [ 4.109853] ACPI: Battery Slot [BAT1] (battery absent) |
| 755 | [ 4.112859] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 756 | [ 4.113417] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| 757 | [ 4.113788] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| 758 | [ 4.115939] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 |
| 759 | [ 4.163046] pci 0000:00:00.0: Intel GM45 Chipset |
| 760 | [ 4.163065] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable |
| 761 | [ 4.164454] pci 0000:00:00.0: detected 262144K stolen memory |
| 762 | [ 4.179618] ath: phy0: Killer Wireless card detected |
| 763 | [ 4.193275] [drm] Memory usable by graphics device = 2048M |
| 764 | [ 4.193278] checking generic (d0000000 500000) vs hw (d0000000 10000000) |
| 765 | [ 4.193279] fb: switching to inteldrmfb from EFI VGA |
| 766 | [ 4.193326] Console: switching to colour dummy device 80x25 |
| 767 | [ 4.195871] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing. |
| 768 | [ 4.196361] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1d/0x0/0x0/0x0/0x0) type:line |
| 769 | [ 4.196363] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=1 (0x1f/0x0/0x0/0x0/0x0) |
| 770 | [ 4.196365] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) |
| 771 | [ 4.196366] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 |
| 772 | [ 4.196368] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x20/0x22 |
| 773 | [ 4.196369] snd_hda_codec_conexant hdaudioC0D0: inputs: |
| 774 | [ 4.196371] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 |
| 775 | [ 4.196372] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1e |
| 776 | [ 4.196374] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1b |
| 777 | [ 4.196375] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a |
| 778 | [ 4.198176] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication |
| 779 | [ 4.200890] ath: phy0: ASPM enabled: 0x43 |
| 780 | [ 4.200897] ath: EEPROM regdomain: 0x60 |
| 781 | [ 4.200899] ath: EEPROM indicates we should expect a direct regpair map |
| 782 | [ 4.200904] ath: Country alpha2 being used: 00 |
| 783 | [ 4.200904] ath: Regpair used: 0x60 |
| 784 | [ 4.201258] [drm] Replacing VGA console driver |
| 785 | [ 4.201354] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 786 | [ 4.201354] [drm] Driver supports precise vblank timestamp query. |
| 787 | [ 4.201360] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe935aa55 |
| 788 | [ 4.201366] [drm] Failed to find VBIOS tables (VBT) |
| 789 | [ 4.201629] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| 790 | [ 4.215231] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| 791 | [ 4.215515] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| 792 | [ 4.215547] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| 793 | [ 4.215578] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| 794 | [ 4.215607] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| 795 | [ 4.215637] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| 796 | [ 4.230877] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| 797 | [ 4.231331] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffbc4a412c0000, irq=16 |
| 798 | [ 4.241149] ath: phy1: ASPM enabled: 0x43 |
| 799 | [ 4.241151] ath: EEPROM regdomain: 0x6c |
| 800 | [ 4.241152] ath: EEPROM indicates we should expect a direct regpair map |
| 801 | [ 4.241154] ath: Country alpha2 being used: 00 |
| 802 | [ 4.241155] ath: Regpair used: 0x6c |
| 803 | [ 4.242550] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' |
| 804 | [ 4.243004] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xffffbc4a417a0000, irq=17 |
| 805 | [ 4.257060] [drm] RC6 disabled, disabling runtime PM support |
| 806 | [ 4.258563] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0 |
| 807 | [ 4.258761] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170119/utaddress-247) |
| 808 | [ 4.258767] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 809 | [ 4.258769] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BE (\GPCM) (20170119/utaddress-247) |
| 810 | [ 4.258773] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170119/utaddress-247) |
| 811 | [ 4.258776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 812 | [ 4.258777] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BE (\GPCM) (20170119/utaddress-247) |
| 813 | [ 4.258780] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170119/utaddress-247) |
| 814 | [ 4.258783] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 815 | [ 4.258783] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| 816 | [ 4.277772] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 817 | [ 4.277817] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| 818 | [ 4.427070] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem |
| 819 | [ 4.432218] EXT4-fs (sda3): mounted filesystem without journal. Opts: user_xattr |
| 820 | [ 4.463574] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| 821 | [ 4.465982] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| 822 | [ 4.537910] Adding 8389628k swap on /dev/sdb2. Priority:-1 extents:1 across:8389628k FS |
| 823 | [ 4.753282] input: PC Speaker as /devices/platform/pcspkr/input/input15 |
| 824 | [ 4.809719] intel_powerclamp: No package C-state available |
| 825 | [ 4.921267] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: user_xattr |
| 826 | [ 4.965364] iTCO_vendor_support: vendor-support=0 |
| 827 | [ 4.968631] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| 828 | [ 4.968684] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560) |
| 829 | [ 4.968825] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 830 | [ 5.001634] systemd-journald[199]: Received request to flush runtime journal from PID 1 |
| 831 | [ 5.034986] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| 832 | [ 5.141150] fbcon: inteldrmfb (fb0) is primary device |
| 833 | [ 5.180692] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: user_xattr |
| 834 | [ 5.282988] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr |
| 835 | [ 5.355859] media: Linux media interface: v0.10 |
| 836 | [ 5.364367] Linux video capture interface: v2.00 |
| 837 | [ 5.369625] Bluetooth: Core ver 2.22 |
| 838 | [ 5.369642] NET: Registered protocol family 31 |
| 839 | [ 5.369643] Bluetooth: HCI device and connection manager initialized |
| 840 | [ 5.369646] Bluetooth: HCI socket layer initialized |
| 841 | [ 5.369649] Bluetooth: L2CAP socket layer initialized |
| 842 | [ 5.369660] Bluetooth: SCO socket layer initialized |
| 843 | [ 5.375463] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480d) |
| 844 | [ 5.375877] usbcore: registered new interface driver btusb |
| 845 | [ 5.376962] uvcvideo 3-6:1.0: Entity type for entity Extension 3 was not initialized! |
| 846 | [ 5.376964] uvcvideo 3-6:1.0: Entity type for entity Processing 2 was not initialized! |
| 847 | [ 5.376965] uvcvideo 3-6:1.0: Entity type for entity Camera 1 was not initialized! |
| 848 | [ 5.377050] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb3/3-6/3-6:1.0/input/input16 |
| 849 | [ 5.377100] usbcore: registered new interface driver uvcvideo |
| 850 | [ 5.377101] USB Video Class driver (1.1.1) |
| 851 | [ 5.494450] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: user_xattr |
| 852 | [ 5.499136] Bluetooth: hci0: BCM: chip id 63 |
| 853 | [ 5.530112] Bluetooth: hci0: universi-hp8460 |
| 854 | [ 5.532091] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| 855 | [ 5.532338] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2) |
| 856 | [ 5.532340] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| 857 | [ 5.532342] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| 858 | [ 5.559441] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr |
| 859 | [ 5.614530] random: crng init done |
| 860 | [ 5.916589] Console: switching to colour frame buffer device 180x56 |
| 861 | [ 6.087061] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 862 | [ 6.087062] Bluetooth: BNEP filters: protocol multicast |
| 863 | [ 6.087065] Bluetooth: BNEP socket layer initialized |
| 864 | [ 6.207158] thinkpad_ec: loading out-of-tree module taints kernel. |
| 865 | [ 6.207524] thinkpad_ec: thinkpad_ec 0.42 loaded. |
| 866 | [ 6.208979] hdaps: LENOVO ThinkPad T400s detected, setting orientation 2 |
| 867 | [ 6.209095] hdaps: initial mode latch is 0x05 |
| 868 | [ 6.209224] hdaps: setting ec_rate=250, filter_order=2 |
| 869 | [ 6.209447] hdaps: device successfully initialized. |
| 870 | [ 6.209892] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input17 |
| 871 | [ 6.210021] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input18 |
| 872 | [ 6.210178] hdaps: driver successfully loaded. |
| 873 | [ 6.262933] applesmc: supported laptop not found! |
| 874 | [ 6.262934] applesmc: driver init failed (ret=-19)! |
| 875 | [ 6.343803] wmi: Mapper loaded |
| 876 | [ 6.363655] acer_wmi: Acer Laptop ACPI-WMI Extras |
| 877 | [ 6.363661] acer_wmi: No or unsupported WMI interface, unable to load |
| 878 | [ 6.434910] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| 879 | [ 8.160542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 880 | [ 8.373670] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 881 | [ 8.382159] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 882 | [ 8.393201] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 883 | [ 8.409562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 884 | [ 8.413819] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| 885 | [ 8.422845] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| 886 | [ 8.436589] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| 887 | [ 8.733096] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready |
| 888 | [ 8.751311] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 889 | [ 12.515568] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 890 | [ 12.578288] wlan0: authenticate with f8:1a:67:5a:c4:74 |
| 891 | [ 12.588306] wlan0: send auth to f8:1a:67:5a:c4:74 (try 1/3) |
| 892 | [ 12.591590] wlan0: authenticated |
| 893 | [ 12.597019] wlan0: associate with f8:1a:67:5a:c4:74 (try 1/3) |
| 894 | [ 12.600708] wlan0: RX AssocResp from f8:1a:67:5a:c4:74 (capab=0x431 status=0 aid=1) |
| 895 | [ 12.600820] wlan0: associated |
| 896 | [ 12.600863] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| 897 | [ 12.608653] ath: EEPROM regdomain: 0x809c |
| 898 | [ 12.608654] ath: EEPROM indicates we should expect a country code |
| 899 | [ 12.608656] ath: doing EEPROM country->regdmn map search |
| 900 | [ 12.608657] ath: country maps to regdmn code: 0x52 |
| 901 | [ 12.608658] ath: Country alpha2 being used: CN |
| 902 | [ 12.608659] ath: Regpair used: 0x52 |
| 903 | [ 12.608661] ath: regdomain 0x809c dynamically updated by country IE |
| 904 | [ 12.608690] ath: EEPROM regdomain: 0x809c |
| 905 | [ 12.608691] ath: EEPROM indicates we should expect a country code |
| 906 | [ 12.608692] ath: doing EEPROM country->regdmn map search |
| 907 | [ 12.608693] ath: country maps to regdmn code: 0x52 |
| 908 | [ 12.608694] ath: Country alpha2 being used: CN |
| 909 | [ 12.608695] ath: Regpair used: 0x52 |
| 910 | [ 12.608696] ath: regdomain 0x809c dynamically updated by country IE |
| 911 | [ 15.411469] tp_smapi 0.42 loading... |
| 912 | [ 15.411476] SMAPI not supported (ID=0x7f) |
| 913 | [ 15.411480] tp_smapi init failed (ret=-6)! |
| 914 | [ 15.487111] tp_smapi 0.42 loading... |
| 915 | [ 15.487120] SMAPI not supported (ID=0x7f) |
| 916 | [ 15.487124] tp_smapi init failed (ret=-6)! |
| 917 | [ 17.516365] Bluetooth: RFCOMM TTY layer initialized |
| 918 | [ 17.516372] Bluetooth: RFCOMM socket layer initialized |
| 919 | [ 17.516378] Bluetooth: RFCOMM ver 1.11 |