Gitiles
Code Review Sign In
review.coreboot.org / board-status / ced32df9e40da812971d05da5891c4956a09a512 / . / intel / d945gclf / 4.0-6472-g43673dd-dirty / 2014-08-10T12:54:41Z / kernel_log.txt
blob: bfad3ba6af4756e77bc850f474685ded0f5acc59 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.13.0-32-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
5[ 0.000000] KERNEL supported cpus:
6[ 0.000000] Intel GenuineIntel
7[ 0.000000] AMD AuthenticAMD
8[ 0.000000] NSC Geode by NSC
9[ 0.000000] Cyrix CyrixInstead
10[ 0.000000] Centaur CentaurHauls
11[ 0.000000] Transmeta GenuineTMx86
12[ 0.000000] Transmeta TransmetaCPU
13[ 0.000000] UMC UMC UMC UMC
14[ 0.000000] Disabled fast string operations
15[ 0.000000] e820: BIOS-provided physical RAM map:
16[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
17[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
19[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f6e1fff] usable
20[ 0.000000] BIOS-e820: [mem 0x000000001f6e2000-0x000000001fffffff] reserved
21[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
22[ 0.000000] NX (Execute Disable) protection: active
23[ 0.000000] SMBIOS 2.7 present.
24[ 0.000000] DMI: Intel D945GCLF/D945GCLF, BIOS 4.0-6472-g43673dd-dirty 08/10/2014
25[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
26[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
27[ 0.000000] e820: last_pfn = 0x1f6e2 max_arch_pfn = 0x1000000
28[ 0.000000] MTRR default type: uncachable
29[ 0.000000] MTRR fixed ranges enabled:
30[ 0.000000] 00000-9FFFF write-back
31[ 0.000000] A0000-BFFFF uncachable
32[ 0.000000] C0000-CFFFF write-through
33[ 0.000000] D0000-FFFFF write-back
34[ 0.000000] MTRR variable ranges enabled:
35[ 0.000000] 0 base 000000000 mask 0E0000000 write-back
36[ 0.000000] 1 base 01F800000 mask 0FF800000 uncachable
37[ 0.000000] 2 base 0C0000000 mask 0E0000000 write-combining
38[ 0.000000] 3 disabled
39[ 0.000000] 4 disabled
40[ 0.000000] 5 disabled
41[ 0.000000] 6 disabled
42[ 0.000000] 7 disabled
43[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
44[ 0.000000] found SMP MP-table at [mem 0x000f5850-0x000f585f] mapped at [c00f5850]
45[ 0.000000] Scanning 1 areas for low memory corruption
46[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
47[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
48[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
49[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
50[ 0.000000] init_memory_mapping: [mem 0x1e000000-0x1e1fffff]
51[ 0.000000] [mem 0x1e000000-0x1e1fffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1dffffff]
53[ 0.000000] [mem 0x1c000000-0x1dffffff] page 2M
54[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
55[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
56[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
57[ 0.000000] init_memory_mapping: [mem 0x1e200000-0x1f6e1fff]
58[ 0.000000] [mem 0x1e200000-0x1f5fffff] page 2M
59[ 0.000000] [mem 0x1f600000-0x1f6e1fff] page 4k
60[ 0.000000] BRK [0x01b8e000, 0x01b8efff] PGTABLE
61[ 0.000000] RAMDISK: [mem 0x1e384000-0x1f6e1fff]
62[ 0.000000] 0MB HIGHMEM available.
63[ 0.000000] 502MB LOWMEM available.
64[ 0.000000] mapped low ram: 0 - 1f6e2000
65[ 0.000000] low ram: 0 - 1f6e2000
66[ 0.000000] BRK [0x01b8f000, 0x01b8ffff] PGTABLE
67[ 0.000000] Zone ranges:
68[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
69[ 0.000000] Normal [mem 0x01000000-0x1f6e1fff]
70[ 0.000000] HighMem empty
71[ 0.000000] Movable zone start for each node
72[ 0.000000] Early memory node ranges
73[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
74[ 0.000000] node 0: [mem 0x00100000-0x1f6e1fff]
75[ 0.000000] On node 0 totalpages: 128640
76[ 0.000000] free_area_init_node: node 0, pgdat c1997200, node_mem_map ddf94020
77[ 0.000000] DMA zone: 32 pages used for memmap
78[ 0.000000] DMA zone: 0 pages reserved
79[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
80[ 0.000000] Normal zone: 974 pages used for memmap
81[ 0.000000] Normal zone: 124642 pages, LIFO batch:31
82[ 0.000000] Using APIC driver default
83[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
84[ 0.000000] Intel MultiProcessor Specification v1.4
85[ 0.000000] Virtual Wire compatibility mode.
86[ 0.000000] MPTABLE: OEM ID: Intel
87[ 0.000000] MPTABLE: Product ID: D945GCLF
88[ 0.000000] MPTABLE: APIC at: 0xFEE00000
89[ 0.000000] Processor #0 (Bootup-CPU)
90[ 0.000000] Processor #1
91[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
92[ 0.000000] Processors: 2
93[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
94[ 0.000000] nr_irqs_gsi: 40
95[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
96[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
97[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
98[ 0.000000] e820: [mem 0x20000000-0xefffffff] available for PCI devices
99[ 0.000000] Booting paravirtualized kernel on bare hardware
100[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
101[ 0.000000] PERCPU: Embedded 14 pages/cpu @ddf74000 s36096 r0 d21248 u57344
102[ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
103[ 0.000000] pcpu-alloc: [0] 0 [0] 1
104[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127634
105[ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- acpi=off debian-installer/language=de keyboard-configuration/layoutcode?=de
106[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
107[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
108[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
109[ 0.000000] Initializing CPU#0
110[ 0.000000] allocated 1029896 bytes of page_cgroup
111[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
112[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
113[ 0.000000] Memory: 477244K/514560K available (6528K kernel code, 639K rwdata, 2760K rodata, 872K init, 924K bss, 37316K reserved, 0K highmem)
114[ 0.000000] virtual kernel memory layout:
115[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
116[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
117[ 0.000000] vmalloc : 0xdfee2000 - 0xffbfe000 ( 509 MB)
118[ 0.000000] lowmem : 0xc0000000 - 0xdf6e2000 ( 502 MB)
119[ 0.000000] .init : 0xc19b4000 - 0xc1a8e000 ( 872 kB)
120[ 0.000000] .data : 0xc1660532 - 0xc19b3e80 (3406 kB)
121[ 0.000000] .text : 0xc1000000 - 0xc1660532 (6529 kB)
122[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
123[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
124[ 0.000000] Hierarchical RCU implementation.
125[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
126[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
127[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
128[ 0.000000] CPU 0 irqstacks, hard=dd808000 soft=dd80a000
129[ 0.000000] Console: colour VGA+ 80x25
130[ 0.000000] console [tty0] enabled
131[ 0.000000] tsc: Fast TSC calibration using PIT
132[ 0.000000] tsc: Detected 1600.022 MHz processor
133[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.04 BogoMIPS (lpj=6400088)
134[ 0.004015] pid_max: default: 32768 minimum: 301
135[ 0.004116] Security Framework initialized
136[ 0.004167] AppArmor: AppArmor initialized
137[ 0.004172] Yama: becoming mindful.
138[ 0.004304] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
139[ 0.004311] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
140[ 0.004869] Initializing cgroup subsys memory
141[ 0.004892] Initializing cgroup subsys devices
142[ 0.004898] Initializing cgroup subsys freezer
143[ 0.004904] Initializing cgroup subsys blkio
144[ 0.004910] Initializing cgroup subsys perf_event
145[ 0.004918] Initializing cgroup subsys hugetlb
146[ 0.004977] Disabled fast string operations
147[ 0.004987] CPU: Physical Processor ID: 0
148[ 0.004992] CPU: Processor Core ID: 0
149[ 0.004999] mce: CPU supports 5 MCE banks
150[ 0.005019] CPU0: Thermal monitoring enabled (TM2)
151[ 0.005050] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
152[ 0.005050] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
153[ 0.005050] tlb_flushall_shift: 6
154[ 0.005548] Freeing SMP alternatives memory: 32K (c1a8e000 - c1a96000)
155[ 0.008714] ftrace: allocating 27783 entries in 55 pages
156[ 0.028286] Enabling APIC mode: Flat. Using 1 I/O APICs
157[ 0.028388] ExtINT not setup in hardware but reported by MP table
158[ 0.028841] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
159[ 0.071528] smpboot: CPU0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
160[ 0.176055] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
161[ 0.176077] ... version: 3
162[ 0.176081] ... bit width: 40
163[ 0.176085] ... generic registers: 2
164[ 0.176089] ... value mask: 000000ffffffffff
165[ 0.176093] ... max period: 000000007fffffff
166[ 0.176096] ... fixed-purpose events: 3
167[ 0.176100] ... event mask: 0000000700000003
168[ 0.181151] CPU 1 irqstacks, hard=dd8ca000 soft=dd8cc000
169[ 0.181160] x86: Booting SMP configuration:
170[ 0.008000] Initializing CPU#1
171[ 0.008000] Disabled fast string operations
172[ 0.181165] .... node #0, CPUs: #1
173[ 0.196151] x86: Booted up 1 node, 2 CPUs
174[ 0.196167] smpboot: Total of 2 processors activated (6400.08 BogoMIPS)
175[ 0.196388] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
176[ 0.197358] devtmpfs: initialized
177[ 0.197358] EVM: security.selinux
178[ 0.197358] EVM: security.SMACK64
179[ 0.197358] EVM: security.ima
180[ 0.197358] EVM: security.capability
181[ 0.202956] pinctrl core: initialized pinctrl subsystem
182[ 0.203226] regulator-dummy: no parameters
183[ 0.203297] RTC time: 2:38:32, date: 22/05/20
184[ 0.203418] NET: Registered protocol family 16
185[ 0.203954] EISA bus registered
186[ 0.203964] cpuidle: using governor ladder
187[ 0.203969] cpuidle: using governor menu
188[ 0.204569] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
189[ 0.204583] PCI: PCI BIOS revision 2.10 entry at 0xfd38b, last bus=4
190[ 0.204588] PCI: Using configuration type 1 for base access
191[ 0.208324] bio: create slab <bio-0> at 0
192[ 0.208324] ACPI: Interpreter disabled.
193[ 0.208441] vgaarb: loaded
194[ 0.208723] SCSI subsystem initialized
195[ 0.208882] libata version 3.00 loaded.
196[ 0.209073] usbcore: registered new interface driver usbfs
197[ 0.209103] usbcore: registered new interface driver hub
198[ 0.209118] usbcore: registered new device driver usb
199[ 0.209118] PCI: Probing PCI hardware
200[ 0.209118] PCI: root bus 00: using default resources
201[ 0.209118] PCI: Probing PCI hardware (bus 00)
202[ 0.209118] PCI host bridge to bus 0000:00
203[ 0.209118] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
204[ 0.209118] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
205[ 0.209118] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
206[ 0.209118] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
207[ 0.209118] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
208[ 0.209118] pci 0000:00:02.0: reg 0x10: [mem 0xe0200000-0xe027ffff]
209[ 0.209118] pci 0000:00:02.0: reg 0x14: [io 0x2080-0x2087]
210[ 0.209118] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff pref]
211[ 0.209118] pci 0000:00:02.0: reg 0x1c: [mem 0xe0280000-0xe02fffff]
212[ 0.209118] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
213[ 0.209118] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
214[ 0.209118] pci 0000:00:1b.0: reg 0x10: [mem 0xe0300000-0xe0303fff 64bit]
215[ 0.209118] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
216[ 0.209118] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
217[ 0.209118] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
218[ 0.209118] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
219[ 0.209170] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
220[ 0.212041] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
221[ 0.212151] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
222[ 0.212279] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
223[ 0.212345] pci 0000:00:1d.0: reg 0x20: [io 0x2000-0x201f]
224[ 0.212466] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
225[ 0.212532] pci 0000:00:1d.1: reg 0x20: [io 0x2020-0x203f]
226[ 0.212648] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
227[ 0.212714] pci 0000:00:1d.3: reg 0x20: [io 0x2040-0x205f]
228[ 0.212849] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
229[ 0.212881] pci 0000:00:1d.7: reg 0x10: [mem 0xe0304000-0xe03043ff]
230[ 0.212999] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
231[ 0.213110] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
232[ 0.213289] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
233[ 0.213441] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
234[ 0.213464] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
235[ 0.213476] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
236[ 0.213485] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
237[ 0.213625] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
238[ 0.213650] pci 0000:00:1f.1: reg 0x10: [io 0x2088-0x208f]
239[ 0.213667] pci 0000:00:1f.1: reg 0x14: [io 0x20a8-0x20ab]
240[ 0.213684] pci 0000:00:1f.1: reg 0x18: [io 0x2090-0x2097]
241[ 0.213701] pci 0000:00:1f.1: reg 0x1c: [io 0x20ac-0x20af]
242[ 0.213718] pci 0000:00:1f.1: reg 0x20: [io 0x2060-0x206f]
243[ 0.213846] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180
244[ 0.213875] pci 0000:00:1f.2: reg 0x10: [io 0x2098-0x209f]
245[ 0.213892] pci 0000:00:1f.2: reg 0x14: [io 0x20b0-0x20b3]
246[ 0.213909] pci 0000:00:1f.2: reg 0x18: [io 0x20a0-0x20a7]
247[ 0.213925] pci 0000:00:1f.2: reg 0x1c: [io 0x20b4-0x20b7]
248[ 0.213943] pci 0000:00:1f.2: reg 0x20: [io 0x2070-0x207f]
249[ 0.214007] pci 0000:00:1f.2: PME# supported from D3hot
250[ 0.214110] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
251[ 0.214192] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
252[ 0.214456] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
253[ 0.214485] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
254[ 0.214530] pci 0000:01:00.0: reg 0x18: [mem 0xe0120000-0xe0120fff 64bit]
255[ 0.214561] pci 0000:01:00.0: reg 0x20: [mem 0xe0000000-0xe000ffff 64bit pref]
256[ 0.214582] pci 0000:01:00.0: reg 0x30: [mem 0xe0100000-0xe011ffff pref]
257[ 0.214683] pci 0000:01:00.0: supports D1 D2
258[ 0.214689] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
259[ 0.220042] pci 0000:00:1c.0: PCI bridge to [bus 01]
260[ 0.220052] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
261[ 0.220062] pci 0000:00:1c.0: bridge window [mem 0xe0100000-0xe01fffff]
262[ 0.220075] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
263[ 0.220190] pci 0000:00:1c.2: PCI bridge to [bus 02]
264[ 0.220310] pci 0000:00:1c.3: PCI bridge to [bus 03]
265[ 0.220466] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
266[ 0.220485] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
267[ 0.220494] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
268[ 0.220531] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
269[ 0.220583] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27b8]
270[ 0.220597] PCI: pci_cache_line_size set to 64 bytes
271[ 0.220643] pci 0000:00:1f.2: address space collision: [io 0x01f0-0x01f7] conflicts with 0000:00:1f.1 [io 0x01f0-0x01f7]
272[ 0.220653] pci 0000:00:1f.2: address space collision: [io 0x03f6] conflicts with 0000:00:1f.1 [io 0x03f6]
273[ 0.220661] pci 0000:00:1f.2: address space collision: [io 0x0170-0x0177] conflicts with 0000:00:1f.1 [io 0x0170-0x0177]
274[ 0.220668] pci 0000:00:1f.2: address space collision: [io 0x0376] conflicts with 0000:00:1f.1 [io 0x0376]
275[ 0.220705] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
276[ 0.220712] e820: reserve RAM buffer [mem 0x1f6e2000-0x1fffffff]
277[ 0.221029] NetLabel: Initializing
278[ 0.221038] NetLabel: domain hash size = 128
279[ 0.221042] NetLabel: protocols = UNLABELED CIPSOv4
280[ 0.221077] NetLabel: unlabeled traffic allowed by default
281[ 0.221153] hpet clockevent registered
282[ 0.221153] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
283[ 0.221153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
284[ 0.221153] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
285[ 0.222519] Switched to clocksource hpet
286[ 0.238317] AppArmor: AppArmor Filesystem Enabled
287[ 0.238417] pnp: PnP ACPI: disabled
288[ 0.238426] PnPBIOS: Scanning system for PnP BIOS support...
289[ 0.238463] PnPBIOS: Found PnP BIOS installation structure at 0xc00f5fd0
290[ 0.238469] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xd2e0, dseg 0xf0000
291[ 0.239961] PnPBIOS: dev_node_info: function not supported on this system
292[ 0.239965] PnPBIOS: Unable to get node info. Aborting.
293[ 0.246956] pci 0000:00:1c.0: PCI bridge to [bus 01]
294[ 0.246972] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
295[ 0.246984] pci 0000:00:1c.0: bridge window [mem 0xe0100000-0xe01fffff]
296[ 0.246994] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
297[ 0.247007] pci 0000:00:1c.2: PCI bridge to [bus 02]
298[ 0.247026] pci 0000:00:1c.3: PCI bridge to [bus 03]
299[ 0.247046] pci 0000:00:1e.0: PCI bridge to [bus 04]
300[ 0.247067] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
301[ 0.247074] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
302[ 0.247081] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
303[ 0.247087] pci_bus 0000:01: resource 1 [mem 0xe0100000-0xe01fffff]
304[ 0.247094] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
305[ 0.247101] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
306[ 0.247108] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
307[ 0.247199] NET: Registered protocol family 2
308[ 0.247622] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
309[ 0.247650] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
310[ 0.247687] TCP: Hash tables configured (established 4096 bind 4096)
311[ 0.247741] TCP: reno registered
312[ 0.247749] UDP hash table entries: 256 (order: 1, 8192 bytes)
313[ 0.247764] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
314[ 0.247925] NET: Registered protocol family 1
315[ 0.247975] pci 0000:00:02.0: Boot video device
316[ 0.248099] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
317[ 0.248149] pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
318[ 0.248190] pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
319[ 0.248235] pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
320[ 0.248418] PCI: CLS 64 bytes, default 64
321[ 0.248596] Trying to unpack rootfs image as initramfs...
322[ 11.817820] Freeing initrd memory: 19832K (de384000 - df6e2000)
323[ 11.818398] platform rtc_cmos: registered platform RTC device (no PNP device found)
324[ 11.818670] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x218
325[ 11.818684] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x218
326[ 11.818886] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
327[ 11.818894] Scanning for low memory corruption every 60 seconds
328[ 11.819579] Initialise system trusted keyring
329[ 11.819709] audit: initializing netlink socket (disabled)
330[ 11.819764] type=2000 audit(1633574322.812:1): initialized
331[ 11.876589] HugeTLB registered 2 MB page size, pre-allocated 0 pages
332[ 11.879986] zbud: loaded
333[ 11.880284] VFS: Disk quotas dquot_6.5.2
334[ 11.880422] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
335[ 11.881912] fuse init (API version 7.22)
336[ 11.882179] msgmni has been set to 970
337[ 11.882365] Key type big_key registered
338[ 11.883547] Key type asymmetric registered
339[ 11.883557] Asymmetric key parser 'x509' registered
340[ 11.883678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
341[ 11.883796] io scheduler noop registered
342[ 11.883805] io scheduler deadline registered (default)
343[ 11.883894] io scheduler cfq registered
344[ 11.884263] pcieport 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16
345[ 11.884330] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
346[ 11.884506] pcieport 0000:00:1c.2: PCI->APIC IRQ transform: INT C -> IRQ 16
347[ 11.884548] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
348[ 11.884678] pcieport 0000:00:1c.3: PCI->APIC IRQ transform: INT D -> IRQ 16
349[ 11.884720] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
350[ 11.884923] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
351[ 11.884933] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
352[ 11.884943] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
353[ 11.884992] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
354[ 11.885002] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
355[ 11.885050] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
356[ 11.885060] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
357[ 11.885108] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
358[ 11.885198] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 464c
359[ 11.885298] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
360[ 11.885318] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
361[ 11.885476] intel_idle: MWAIT substates: 0x10
362[ 11.885495] intel_idle: v0.4 model 0x1C
363[ 11.885501] intel_idle: lapic_timer_reliable_states 0x2
364[ 11.885608] ipmi message handler version 39.2
365[ 11.885813] isapnp: Scanning for PnP cards...
366[ 11.886098] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
367[ 11.906812] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
368[ 11.911357] Linux agpgart interface v0.103
369[ 11.911539] agpgart-intel 0000:00:00.0: Intel 945G Chipset
370[ 11.911674] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 524288K mappable
371[ 11.911958] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
372[ 11.912307] agpgart-intel 0000:00:00.0: AGP aperture is 512M @ 0xc0000000
373[ 11.917619] brd: module loaded
374[ 11.920366] loop: module loaded
375[ 11.920971] ata_piix 0000:00:1f.1: version 2.13
376[ 11.921015] ata_piix 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 19
377[ 11.922052] scsi0 : ata_piix
378[ 11.922273] scsi1 : ata_piix
379[ 11.922403] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2060 irq 14
380[ 11.922411] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2068 irq 15
381[ 11.922464] ata_piix 0000:00:1f.2: device not available (can't reserve [io 0x0000-0x0007])
382[ 11.922478] ata_piix: probe of 0000:00:1f.2 failed with error -22
383[ 11.923960] libphy: Fixed MDIO Bus: probed
384[ 11.924541] tun: Universal TUN/TAP device driver, 1.6
385[ 11.924548] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
386[ 11.924746] PPP generic driver version 2.4.2
387[ 11.924920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
388[ 11.924937] ehci-pci: EHCI PCI platform driver
389[ 11.925001] ehci-pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
390[ 11.925078] ehci-pci 0000:00:1d.7: EHCI Host Controller
391[ 11.925097] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
392[ 11.925131] ehci-pci 0000:00:1d.7: debug port 1
393[ 11.929089] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
394[ 11.929125] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe0304000
395[ 11.940051] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
396[ 11.940335] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
397[ 11.940346] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
398[ 11.940354] usb usb1: Product: EHCI Host Controller
399[ 11.940362] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
400[ 11.940369] usb usb1: SerialNumber: 0000:00:1d.7
401[ 11.940768] hub 1-0:1.0: USB hub found
402[ 11.940809] hub 1-0:1.0: 8 ports detected
403[ 11.941453] ehci-platform: EHCI generic platform driver
404[ 11.941502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
405[ 11.941508] ohci-pci: OHCI PCI platform driver
406[ 11.941562] ohci-platform: OHCI generic platform driver
407[ 11.941595] uhci_hcd: USB Universal Host Controller Interface driver
408[ 11.941694] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
409[ 11.941730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
410[ 11.941747] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
411[ 11.941804] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002000
412[ 11.942025] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
413[ 11.942037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
414[ 11.942045] usb usb2: Product: UHCI Host Controller
415[ 11.942053] usb usb2: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
416[ 11.942061] usb usb2: SerialNumber: 0000:00:1d.0
417[ 11.942399] hub 2-0:1.0: USB hub found
418[ 11.942449] hub 2-0:1.0: 2 ports detected
419[ 11.942749] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
420[ 11.942777] uhci_hcd 0000:00:1d.1: UHCI Host Controller
421[ 11.942792] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
422[ 11.942854] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
423[ 11.943031] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
424[ 11.943041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
425[ 11.943049] usb usb3: Product: UHCI Host Controller
426[ 11.943057] usb usb3: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
427[ 11.943064] usb usb3: SerialNumber: 0000:00:1d.1
428[ 11.943396] hub 3-0:1.0: USB hub found
429[ 11.943425] hub 3-0:1.0: 2 ports detected
430[ 11.943696] uhci_hcd 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
431[ 11.943724] uhci_hcd 0000:00:1d.3: UHCI Host Controller
432[ 11.943740] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
433[ 11.943797] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040
434[ 11.943971] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
435[ 11.943980] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
436[ 11.943988] usb usb4: Product: UHCI Host Controller
437[ 11.943996] usb usb4: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
438[ 11.944059] usb usb4: SerialNumber: 0000:00:1d.3
439[ 11.944407] hub 4-0:1.0: USB hub found
440[ 11.944437] hub 4-0:1.0: 2 ports detected
441[ 11.944923] i8042: PNP: No PS/2 controller found. Probing ports directly.
442[ 11.948225] serio: i8042 KBD port at 0x60,0x64 irq 1
443[ 11.948251] serio: i8042 AUX port at 0x60,0x64 irq 12
444[ 11.948670] mousedev: PS/2 mouse device common for all mice
445[ 11.949125] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
446[ 11.949180] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram, hpet irqs
447[ 11.949458] device-mapper: uevent: version 1.0.3
448[ 11.949677] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
449[ 11.949752] platform eisa.0: Probing EISA bus 0
450[ 11.949775] platform eisa.0: Cannot allocate resource for EISA slot 1
451[ 11.949785] platform eisa.0: Cannot allocate resource for EISA slot 2
452[ 11.949842] platform eisa.0: EISA: Detected 0 cards
453[ 11.949863] cpufreq-nforce2: No nForce2 chipset.
454[ 11.949873] ledtrig-cpu: registered to indicate activity on CPUs
455[ 11.950345] TCP: cubic registered
456[ 11.950710] NET: Registered protocol family 10
457[ 11.951370] NET: Registered protocol family 17
458[ 11.951416] Key type dns_resolver registered
459[ 11.952179] Using IPI No-Shortcut mode
460[ 11.952515] Loading compiled-in X.509 certificates
461[ 11.965968] Loaded X.509 cert 'Magrathea: Glacier signing key: a7fc6590fc4a8d859aaebda2ca5dd04716244fa0'
462[ 11.966026] registered taskstats version 1
463[ 11.975704] Key type trusted registered
464[ 11.982245] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
465[ 11.984395] Key type encrypted registered
466[ 11.995672] AppArmor: AppArmor sha1 policy hashing enabled
467[ 11.995686] IMA: No TPM chip found, activating TPM-bypass!
468[ 11.996200] regulator-dummy: incomplete constraints, leaving on
469[ 11.996394] Magic number: 8:265:611
470[ 11.996551] rtc_cmos rtc_cmos: hctosys: invalid date/time
471[ 11.996716] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
472[ 11.996722] EDD information not available.
473[ 11.996802] PM: Hibernation image not present or could not be loaded.
474[ 12.240004] isapnp: No Plug & Play device found
475[ 12.241295] Freeing unused kernel memory: 872K (c19b4000 - c1a8e000)
476[ 12.241471] Write protecting the kernel text: 6532k
477[ 12.241637] Write protecting the kernel read-only data: 2764k
478[ 12.241642] NX-protecting the kernel data: 5756k
479[ 12.252187] usb 1-3: new high-speed USB device number 2 using ehci-pci
480[ 12.289120] systemd-udevd[101]: starting version 204
481[ 12.404129] [drm] Initialized drm 1.1.0 20060810
482[ 12.411815] pata_acpi 0000:00:1f.2: device not available (can't reserve [io 0x0000-0x0007])
483[ 12.411844] pata_acpi: probe of 0000:00:1f.2 failed with error -22
484[ 12.473633] usb 1-3: New USB device found, idVendor=05dc, idProduct=c75c
485[ 12.473648] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
486[ 12.473657] usb 1-3: Product: USB Flash Drive
487[ 12.473665] usb 1-3: Manufacturer: Lexar
488[ 12.473673] usb 1-3: SerialNumber: 7B9369852A4F6EFF4A35
489[ 12.489424] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
490[ 12.489526] r8169 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
491[ 12.489781] r8169 0000:01:00.0: irq 44 for MSI/MSI-X
492[ 12.490444] r8169 0000:01:00.0 eth0: RTL8102e at 0xdfef8000, 00:1c:c0:7d:00:e9, XID 04a00000 IRQ 44
493[ 12.730863] usb-storage 1-3:1.0: USB Mass Storage device detected
494[ 12.731182] scsi2 : usb-storage 1-3:1.0
495[ 12.731820] usbcore: registered new interface driver usb-storage
496[ 12.816066] tsc: Refined TSC clocksource calibration: 1599.997 MHz
497[ 13.730138] scsi 2:0:0:0: Direct-Access Lexar USB Flash Drive 8.07 PQ: 0 ANSI: 4
498[ 13.731066] sd 2:0:0:0: Attached scsi generic sg0 type 0
499[ 13.732964] sd 2:0:0:0: [sda] 31285248 512-byte logical blocks: (16.0 GB/14.9 GiB)
500[ 13.734806] sd 2:0:0:0: [sda] Write Protect is off
501[ 13.734826] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
502[ 13.736328] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
503[ 13.743884] sda: sda1
504[ 13.748843] sd 2:0:0:0: [sda] Attached SCSI removable disk
505[ 13.816228] Switched to clocksource tsc
506[ 14.316334] ISO 9660 Extensions: Microsoft Joliet Level 3
507[ 14.333207] ISO 9660 Extensions: RRIP_1991A
508[ 14.415749] squashfs: version 4.0 (2009/01/31) Phillip Lougher
509[ 14.854938] random: debconf-communi urandom read with 64 bits of entropy available
510[ 16.155173] random: nonblocking pool is initialized
511[ 41.032511] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
512[ 42.322866] systemd-udevd[965]: starting version 204
513[ 43.035627] lp: driver loaded but no devices found
514[ 43.194658] ppdev: user-space parallel port driver
515[ 43.470329] intel_rng: FWH not detected
516[ 43.568354] Bluetooth: Core ver 2.17
517[ 43.568649] NET: Registered protocol family 31
518[ 43.568660] Bluetooth: HCI device and connection manager initialized
519[ 43.568692] Bluetooth: HCI socket layer initialized
520[ 43.568706] Bluetooth: L2CAP socket layer initialized
521[ 43.568732] Bluetooth: SCO socket layer initialized
522[ 43.731314] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
523[ 43.731329] Bluetooth: BNEP filters: protocol multicast
524[ 43.731362] Bluetooth: BNEP socket layer initialized
525[ 43.887501] Bluetooth: RFCOMM TTY layer initialized
526[ 43.887547] Bluetooth: RFCOMM socket layer initialized
527[ 43.887607] Bluetooth: RFCOMM ver 1.11
528[ 43.921399] ACPI Exception: AE_BAD_PARAMETER, Thread 3710232272 could not acquire Mutex [0x1] (20131115/utmutex-285)
529[ 43.921432] ACPI Exception: AE_BAD_PARAMETER, Thread 3710232272 could not acquire Mutex [0x1] (20131115/utmutex-285)
530[ 43.921447] ACPI Exception: AE_BAD_PARAMETER, Thread 3710232272 could not acquire Mutex [0x1] (20131115/utmutex-285)
531[ 44.028782] leds_ss4200: no LED devices found
532[ 45.744141] device-mapper: multipath: version 1.6.0 loaded
533[ 47.359359] gpio_ich: GPIO from 206 to 255 on gpio_ich
534[ 47.544120] snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 16
535[ 47.544261] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
536[ 47.637335] hda_codec: ALC662 rev1: SKU not ready 0x411111f0
537[ 47.637728] autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
538[ 47.637738] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
539[ 47.637745] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
540[ 47.637752] mono: mono_out=0x0
541[ 47.637757] dig-out=0x1e/0x0
542[ 47.637762] inputs:
543[ 47.637770] Front Mic=0x19
544[ 47.637776] Rear Mic=0x18
545[ 47.637781] Line=0x1a
546[ 47.637789] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
547[ 47.637794] realtek: Enable default setup for auto mode as fallback
548[ 47.660428] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
549[ 47.665435] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
550[ 47.666573] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
551[ 47.667788] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
552[ 47.669948] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
553[ 47.673814] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
554[ 47.675166] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
555[ 47.804180] init: failsafe main process (1185) killed by TERM signal
556[ 49.166640] init: udev-fallback-graphics main process (1315) terminated with status 1
557[ 50.389325] r8169 0000:01:00.0 eth0: link down
558[ 50.389621] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
559[ 50.390862] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
560[ 50.394756] r8169 0000:01:00.0 eth0: link down
561[ 51.912285] r8169 0000:01:00.0 eth0: link up
562[ 51.912319] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
563[ 51.994200] init: alsa-restore main process (1578) terminated with status 99
564[ 54.214926] perf samples too long (2542 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
565[ 61.213489] init: plymouth-upstart-bridge main process ended, respawning
566[ 61.259012] init: plymouth-upstart-bridge main process (2029) terminated with status 1
567[ 61.259079] init: plymouth-upstart-bridge main process ended, respawning
568[ 62.281209] init: lightdm main process (1664) terminated with status 1
569[ 78.422297] init: failsafe-x main process (2042) terminated with status 1
570[ 223.167480] perf samples too long (5025 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
571[ 544.026333] init: ssh main process ended, respawning
572[ 727.440582] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available