Jonathan A. Kollasch | 83305f5 | 2016-05-12 14:25:44 +0000 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.78-1 |
| 4 | [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0 |
| 5 | [ 0.000000] BIOS-provided physical RAM map: |
| 6 | [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) |
| 7 | [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) |
| 8 | [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| 9 | [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff9f000 (usable) |
| 10 | [ 0.000000] BIOS-e820: 000000001ff9f000 - 0000000020000000 (reserved) |
| 11 | [ 0.000000] NX (Execute Disable) protection: active |
| 12 | [ 0.000000] SMBIOS 2.7 present. |
| 13 | [ 0.000000] DMI: MSI MS-7135/MS-7135, BIOS 4.3-821-g4488d73 04/25/2016 |
| 14 | [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) |
| 15 | [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) |
| 16 | [ 0.000000] No AGP bridge found |
| 17 | [ 0.000000] last_pfn = 0x1ff9f max_arch_pfn = 0x400000000 |
| 18 | [ 0.000000] MTRR default type: uncachable |
| 19 | [ 0.000000] MTRR fixed ranges enabled: |
| 20 | [ 0.000000] 00000-9FFFF write-back |
| 21 | [ 0.000000] A0000-BFFFF uncachable |
| 22 | [ 0.000000] C0000-FFFFF write-back |
| 23 | [ 0.000000] MTRR variable ranges enabled: |
| 24 | [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back |
| 25 | [ 0.000000] 1 base 00F0000000 mask FFF8000000 write-combining |
| 26 | [ 0.000000] 2 disabled |
| 27 | [ 0.000000] 3 disabled |
| 28 | [ 0.000000] 4 disabled |
| 29 | [ 0.000000] 5 disabled |
| 30 | [ 0.000000] 6 disabled |
| 31 | [ 0.000000] 7 disabled |
| 32 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 33 | [ 0.000000] found SMP MP-table at [ffff8800000f05e0] f05e0 |
| 34 | [ 0.000000] initial memory mapped : 0 - 20000000 |
| 35 | [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 |
| 36 | [ 0.000000] init_memory_mapping: 0000000000000000-000000001ff9f000 |
| 37 | [ 0.000000] 0000000000 - 001fe00000 page 2M |
| 38 | [ 0.000000] 001fe00000 - 001ff9f000 page 4k |
| 39 | [ 0.000000] kernel direct mapping tables up to 1ff9f000 @ 1ff9c000-1ff9f000 |
| 40 | [ 0.000000] RAMDISK: 1efa2000 - 1fb24000 |
| 41 | [ 0.000000] ACPI: RSDP 0x00000000000F07D0 00024 (v02 CORE ) |
| 42 | [ 0.000000] ACPI: XSDT 0x000000001FFB00E0 0005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 43 | [ 0.000000] ACPI: FACP 0x000000001FFB1A10 00074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 44 | [ 0.000000] ACPI: DSDT 0x000000001FFB0280 01784 (v01 CORE CB-DSDT 00000001 INTL 20160318) |
| 45 | [ 0.000000] ACPI: FACS 0x000000001FFB0240 00040 |
| 46 | [ 0.000000] ACPI: SSDT 0x000000001FFB1B10 0023B (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 47 | [ 0.000000] ACPI: TCPA 0x000000001FFB1D50 00032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 48 | [ 0.000000] ACPI: APIC 0x000000001FFB1D90 00050 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 49 | [ 0.000000] ACPI: SRAT 0x000000001FFB1DE0 00090 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 50 | [ 0.000000] ACPI: SLIT 0x000000001FFB1E70 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 51 | [ 0.000000] ACPI: HPET 0x000000001FFB1EA0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 52 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 53 | [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| 54 | [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 |
| 55 | [ 0.000000] SRAT: Node 0 PXM 0 100000-20000000 |
| 56 | [ 0.000000] NUMA: Initialized distance table, cnt=1 |
| 57 | [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,1ff9f000) -> [0,1ff9f000) |
| 58 | [ 0.000000] Initmem setup node 0 0000000000000000-000000001ff9f000 |
| 59 | [ 0.000000] NODE_DATA [000000001ff97000 - 000000001ff9bfff] |
| 60 | [ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e200000-ffff88001e9fffff] on node 0 |
| 61 | [ 0.000000] Zone PFN ranges: |
| 62 | [ 0.000000] DMA 0x00000010 -> 0x00001000 |
| 63 | [ 0.000000] DMA32 0x00001000 -> 0x00100000 |
| 64 | [ 0.000000] Normal empty |
| 65 | [ 0.000000] Movable zone start PFN for each node |
| 66 | [ 0.000000] early_node_map[2] active PFN ranges |
| 67 | [ 0.000000] 0: 0x00000010 -> 0x0000009f |
| 68 | [ 0.000000] 0: 0x00000100 -> 0x0001ff9f |
| 69 | [ 0.000000] On node 0 totalpages: 130862 |
| 70 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 71 | [ 0.000000] DMA zone: 5 pages reserved |
| 72 | [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 |
| 73 | [ 0.000000] DMA32 zone: 1735 pages used for memmap |
| 74 | [ 0.000000] DMA32 zone: 125144 pages, LIFO batch:31 |
| 75 | [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 |
| 76 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 77 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 78 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 79 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 80 | [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
| 81 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| 82 | [ 0.000000] ACPI: IRQ9 used by override. |
| 83 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 84 | [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| 85 | [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs |
| 86 | [ 0.000000] nr_irqs_gsi: 40 |
| 87 | [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 |
| 88 | [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 |
| 89 | [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 |
| 90 | [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000) |
| 91 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 92 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 |
| 93 | [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fc00000 s78912 r8192 d23488 u2097152 |
| 94 | [ 0.000000] pcpu-alloc: s78912 r8192 d23488 u2097152 alloc=1*2097152 |
| 95 | [ 0.000000] pcpu-alloc: [0] 0 |
| 96 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066 |
| 97 | [ 0.000000] Policy zone: DMA32 |
| 98 | [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0 |
| 99 | [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) |
| 100 | [ 0.000000] Checking aperture... |
| 101 | [ 0.000000] No AGP bridge found |
| 102 | [ 0.000000] Node 0: aperture @ f8000000 size 64 MB |
| 103 | [ 0.000000] Memory: 494856k/523900k available (3438k kernel code, 452k absent, 28592k reserved, 3301k data, 584k init) |
| 104 | [ 0.000000] Hierarchical RCU implementation. |
| 105 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 106 | [ 0.000000] NR_IRQS:33024 nr_irqs:256 16 |
| 107 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 108 | [ 0.000000] Console: colour VGA+ 80x25 |
| 109 | [ 0.000000] console [tty0] enabled |
| 110 | [ 0.000000] console [ttyS0] enabled |
| 111 | [ 0.000000] hpet clockevent registered |
| 112 | [ 0.000000] Fast TSC calibration using PIT |
| 113 | [ 0.000000] Detected 2010.290 MHz processor. |
| 114 | [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.58 BogoMIPS (lpj=8041160) |
| 115 | [ 0.016004] pid_max: default: 32768 minimum: 301 |
| 116 | [ 0.020064] Security Framework initialized |
| 117 | [ 0.024010] AppArmor: AppArmor disabled by boot time parameter |
| 118 | [ 0.028066] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) |
| 119 | [ 0.032511] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| 120 | [ 0.036265] Mount-cache hash table entries: 256 |
| 121 | [ 0.040200] Initializing cgroup subsys cpuacct |
| 122 | [ 0.044009] Initializing cgroup subsys memory |
| 123 | [ 0.048023] Initializing cgroup subsys devices |
| 124 | [ 0.052006] Initializing cgroup subsys freezer |
| 125 | [ 0.056006] Initializing cgroup subsys net_cls |
| 126 | [ 0.060006] Initializing cgroup subsys blkio |
| 127 | [ 0.064016] Initializing cgroup subsys perf_event |
| 128 | [ 0.068045] tseg: 0000000000 |
| 129 | [ 0.068066] mce: CPU supports 5 MCE banks |
| 130 | [ 0.072043] SMP alternatives: switching to UP code |
| 131 | [ 0.082326] Freeing SMP alternatives: 8k freed |
| 132 | [ 0.084016] ACPI: Core revision 20110623 |
| 133 | [ 0.089242] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| 134 | [ 0.133675] CPU0: AMD Sempron(tm) Processor 3400+ stepping 02 |
| 135 | [ 0.140008] Performance Events: AMD PMU driver. |
| 136 | [ 0.140011] ... version: 0 |
| 137 | [ 0.144009] ... bit width: 48 |
| 138 | [ 0.148009] ... generic registers: 4 |
| 139 | [ 0.152010] ... value mask: 0000ffffffffffff |
| 140 | [ 0.156010] ... max period: 00007fffffffffff |
| 141 | [ 0.160010] ... fixed-purpose events: 0 |
| 142 | [ 0.164010] ... event mask: 000000000000000f |
| 143 | [ 0.168245] NMI watchdog enabled, takes one hw-pmu counter. |
| 144 | [ 0.172040] Brought up 1 CPUs |
| 145 | [ 0.176014] Total of 1 processors activated (4020.58 BogoMIPS). |
| 146 | [ 0.180511] devtmpfs: initialized |
| 147 | [ 0.187605] print_constraints: dummy: |
| 148 | [ 0.188090] NET: Registered protocol family 16 |
| 149 | [ 0.192156] node 0 link 0: io port [1000, 2fff] |
| 150 | [ 0.192160] TOM: 0000000020000000 aka 512M |
| 151 | [ 0.196016] node 0 link 0: mmio [a0000, bffff] |
| 152 | [ 0.196020] node 0 link 0: mmio [fc000000, fd2fffff] |
| 153 | [ 0.196023] node 0 link 0: mmio [f0000000, f7ffffff] |
| 154 | [ 0.196027] bus: [00, 03] on node 0 link 0 |
| 155 | [ 0.196031] bus: 00 index 0 [io 0x0000-0xffff] |
| 156 | [ 0.196034] bus: 00 index 1 [mem 0x000a0000-0x000bffff] |
| 157 | [ 0.196038] bus: 00 index 2 [mem 0xf8000000-0xfcffffffff] |
| 158 | [ 0.196041] bus: 00 index 3 [mem 0x20000000-0xf7ffffff] |
| 159 | [ 0.196055] ACPI: bus type pci registered |
| 160 | [ 0.200094] PCI: Using configuration type 1 for base access |
| 161 | [ 0.204950] bio: create slab <bio-0> at 0 |
| 162 | [ 0.208137] ACPI: Added _OSI(Module Device) |
| 163 | [ 0.212019] ACPI: Added _OSI(Processor Device) |
| 164 | [ 0.216015] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 165 | [ 0.220015] ACPI: Added _OSI(Processor Aggregator Device) |
| 166 | [ 0.224302] ACPI: EC: Look up EC in DSDT |
| 167 | [ 0.224559] ACPI: Executed 1 blocks of module-level executable AML code |
| 168 | [ 0.233129] ACPI: Interpreter enabled |
| 169 | [ 0.236019] ACPI: (supports S0 S5) |
| 170 | [ 0.240665] ACPI: Using IOAPIC for interrupt routing |
| 171 | [ 0.248795] ACPI: No dock devices found. |
| 172 | [ 0.252019] HEST: Table not found. |
| 173 | [ 0.256020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 174 | [ 0.261807] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03]) |
| 175 | [ 0.269059] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df] |
| 176 | [ 0.272019] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x2fff] |
| 177 | [ 0.276019] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xf7ffffff] |
| 178 | [ 0.280019] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfd2fffff] |
| 179 | [ 0.284019] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] |
| 180 | [ 0.288020] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] |
| 181 | [ 0.292021] pci_root PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored |
| 182 | [ 0.296039] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580 |
| 183 | [ 0.296115] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601 |
| 184 | [ 0.296122] pci 0000:00:01.0: reg 10: [io 0x2400-0x247f] |
| 185 | [ 0.296153] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05 |
| 186 | [ 0.296161] pci 0000:00:01.1: reg 10: [io 0x2800-0x281f] |
| 187 | [ 0.296174] pci 0000:00:01.1: reg 20: [io 0x2480-0x24bf] |
| 188 | [ 0.296180] pci 0000:00:01.1: reg 24: [io 0x24c0-0x24ff] |
| 189 | [ 0.296195] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| 190 | [ 0.296214] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03 |
| 191 | [ 0.296222] pci 0000:00:02.0: reg 10: [mem 0xfd200000-0xfd200fff] |
| 192 | [ 0.296250] pci 0000:00:02.0: supports D1 D2 |
| 193 | [ 0.296252] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 194 | [ 0.296268] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03 |
| 195 | [ 0.296277] pci 0000:00:02.1: reg 10: [mem 0xfd205000-0xfd2050ff] |
| 196 | [ 0.296310] pci 0000:00:02.1: supports D1 D2 |
| 197 | [ 0.296312] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| 198 | [ 0.296337] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401 |
| 199 | [ 0.296345] pci 0000:00:04.0: reg 10: [io 0x1c00-0x1cff] |
| 200 | [ 0.296350] pci 0000:00:04.0: reg 14: [io 0x2000-0x20ff] |
| 201 | [ 0.296356] pci 0000:00:04.0: reg 18: [mem 0xfd201000-0xfd201fff] |
| 202 | [ 0.296378] pci 0000:00:04.0: supports D1 D2 |
| 203 | [ 0.296391] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101 |
| 204 | [ 0.296409] pci 0000:00:06.0: reg 20: [io 0x2820-0x282f] |
| 205 | [ 0.296437] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101 |
| 206 | [ 0.296444] pci 0000:00:07.0: reg 10: [io 0x2850-0x2857] |
| 207 | [ 0.296450] pci 0000:00:07.0: reg 14: [io 0x2878-0x287b] |
| 208 | [ 0.296455] pci 0000:00:07.0: reg 18: [io 0x2858-0x285f] |
| 209 | [ 0.296460] pci 0000:00:07.0: reg 1c: [io 0x287c-0x287f] |
| 210 | [ 0.296465] pci 0000:00:07.0: reg 20: [io 0x2830-0x283f] |
| 211 | [ 0.296471] pci 0000:00:07.0: reg 24: [mem 0xfd202000-0xfd202fff] |
| 212 | [ 0.296495] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101 |
| 213 | [ 0.296503] pci 0000:00:08.0: reg 10: [io 0x2860-0x2867] |
| 214 | [ 0.296508] pci 0000:00:08.0: reg 14: [io 0x2880-0x2883] |
| 215 | [ 0.296514] pci 0000:00:08.0: reg 18: [io 0x2868-0x286f] |
| 216 | [ 0.296519] pci 0000:00:08.0: reg 1c: [io 0x2884-0x2887] |
| 217 | [ 0.296524] pci 0000:00:08.0: reg 20: [io 0x2840-0x284f] |
| 218 | [ 0.296529] pci 0000:00:08.0: reg 24: [mem 0xfd203000-0xfd203fff] |
| 219 | [ 0.296554] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604 |
| 220 | [ 0.296585] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680 |
| 221 | [ 0.296594] pci 0000:00:0a.0: reg 10: [mem 0xfd204000-0xfd204fff] |
| 222 | [ 0.296600] pci 0000:00:0a.0: reg 14: [io 0x2870-0x2877] |
| 223 | [ 0.296630] pci 0000:00:0a.0: supports D1 D2 |
| 224 | [ 0.296632] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 225 | [ 0.296652] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604 |
| 226 | [ 0.296680] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 227 | [ 0.296700] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604 |
| 228 | [ 0.296727] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 229 | [ 0.296748] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 |
| 230 | [ 0.296771] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 |
| 231 | [ 0.296790] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 |
| 232 | [ 0.296809] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 |
| 233 | [ 0.296849] pci 0000:01:00.0: [10de:0181] type 0 class 0x000300 |
| 234 | [ 0.296861] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff] |
| 235 | [ 0.296869] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref] |
| 236 | [ 0.296893] pci 0000:01:00.0: reg 30: [mem 0xfd000000-0xfd01ffff pref] |
| 237 | [ 0.296942] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) |
| 238 | [ 0.300022] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfd0fffff] |
| 239 | [ 0.300026] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf7ffffff pref] |
| 240 | [ 0.300029] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| 241 | [ 0.300033] pci 0000:00:09.0: bridge window [io 0x0d00-0x2fff] (subtractive decode) |
| 242 | [ 0.300036] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf7ffffff] (subtractive decode) |
| 243 | [ 0.300040] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfd2fffff] (subtractive decode) |
| 244 | [ 0.300044] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| 245 | [ 0.300081] pci 0000:02:00.0: [1b73:1000] type 0 class 0x000c03 |
| 246 | [ 0.300093] pci 0000:02:00.0: reg 10: [mem 0xfd100000-0xfd10ffff] |
| 247 | [ 0.300172] pci 0000:02:00.0: PME# supported from D0 D3hot |
| 248 | [ 0.308033] pci 0000:00:0d.0: PCI bridge to [bus 02-02] |
| 249 | [ 0.312024] pci 0000:00:0d.0: bridge window [mem 0xfd100000-0xfd1fffff] |
| 250 | [ 0.312045] pci 0000:00:0e.0: PCI bridge to [bus 03-03] |
| 251 | [ 0.316032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| 252 | [ 0.316164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT] |
| 253 | [ 0.316246] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) |
| 254 | [ 0.330179] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| 255 | [ 0.336467] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| 256 | [ 0.341778] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 *18 19) |
| 257 | [ 0.349174] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 *19) |
| 258 | [ 0.353778] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| 259 | [ 0.359002] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0 |
| 260 | [ 0.365392] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| 261 | [ 0.369782] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 22 *23) |
| 262 | [ 0.373780] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 *23) |
| 263 | [ 0.380477] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| 264 | [ 0.388106] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| 265 | [ 0.394994] ACPI: PCI Interrupt Link [LSA0] (IRQs *20 21 22 23) |
| 266 | [ 0.397779] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 *21 22 23) |
| 267 | [ 0.404345] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 *22 23) |
| 268 | [ 0.409880] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none |
| 269 | [ 0.412029] vgaarb: loaded |
| 270 | [ 0.416027] vgaarb: bridge control possible 0000:01:00.0 |
| 271 | [ 0.420093] PCI: Using ACPI for IRQ routing |
| 272 | [ 0.424030] PCI: pci_cache_line_size set to 64 bytes |
| 273 | [ 0.424088] reserve RAM buffer: 000000000009fc00 - 000000000009ffff |
| 274 | [ 0.424092] reserve RAM buffer: 000000001ff9f000 - 000000001fffffff |
| 275 | [ 0.424256] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| 276 | [ 0.428032] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| 277 | [ 0.433187] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| 278 | [ 0.440122] Switching to clocksource hpet |
| 279 | [ 0.446333] pnp: PnP ACPI init |
| 280 | [ 0.449505] ACPI: bus type pnp registered |
| 281 | [ 0.455409] pnp 00:00: [bus 00-03] |
| 282 | [ 0.455412] pnp 00:00: [io 0x03b0-0x03df window] |
| 283 | [ 0.455415] pnp 00:00: [io 0x0d00-0x2fff window] |
| 284 | [ 0.455419] pnp 00:00: [mem 0xf0000000-0xf7ffffff window] |
| 285 | [ 0.455422] pnp 00:00: [mem 0xfc000000-0xfd2fffff window] |
| 286 | [ 0.455425] pnp 00:00: [mem 0x000a0000-0x000bffff window] |
| 287 | [ 0.455428] pnp 00:00: [io 0x0cf8-0x0cff] |
| 288 | [ 0.455432] pnp 00:00: [io 0x0000-0x0cf7 window] |
| 289 | [ 0.455496] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) |
| 290 | [ 0.455717] pnp 00:01: [io 0x0060] |
| 291 | [ 0.455720] pnp 00:01: [io 0x0064] |
| 292 | [ 0.455734] pnp 00:01: [irq 1] |
| 293 | [ 0.455770] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) |
| 294 | [ 0.455804] pnp 00:02: [irq 12] |
| 295 | [ 0.455839] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 296 | [ 0.455868] pnp 00:03: [io 0x0378-0x0387] |
| 297 | [ 0.455875] pnp 00:03: [irq 7] |
| 298 | [ 0.455911] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) |
| 299 | [ 0.455942] pnp 00:04: [io 0x03f0-0x03f7] |
| 300 | [ 0.455949] pnp 00:04: [irq 6] |
| 301 | [ 0.455952] pnp 00:04: [dma 2] |
| 302 | [ 0.455987] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| 303 | [ 0.455993] pnp: PnP ACPI: found 5 devices |
| 304 | [ 0.460163] ACPI: ACPI bus type pnp unregistered |
| 305 | [ 0.471905] PCI: max bus depth: 1 pci_try_num: 2 |
| 306 | [ 0.471936] pci 0000:00:09.0: PCI bridge to [bus 01-01] |
| 307 | [ 0.477245] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfd0fffff] |
| 308 | [ 0.484106] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf7ffffff pref] |
| 309 | [ 0.491421] pci 0000:00:0d.0: PCI bridge to [bus 02-02] |
| 310 | [ 0.496716] pci 0000:00:0d.0: bridge window [mem 0xfd100000-0xfd1fffff] |
| 311 | [ 0.503571] pci 0000:00:0e.0: PCI bridge to [bus 03-03] |
| 312 | [ 0.508875] pci 0000:00:09.0: setting latency timer to 64 |
| 313 | [ 0.508881] pci 0000:00:0d.0: setting latency timer to 64 |
| 314 | [ 0.508887] pci 0000:00:0e.0: setting latency timer to 64 |
| 315 | [ 0.508891] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 316 | [ 0.508894] pci_bus 0000:00: resource 5 [io 0x0d00-0x2fff] |
| 317 | [ 0.508897] pci_bus 0000:00: resource 6 [mem 0xf0000000-0xf7ffffff] |
| 318 | [ 0.508900] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfd2fffff] |
| 319 | [ 0.508903] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] |
| 320 | [ 0.508907] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfd0fffff] |
| 321 | [ 0.508910] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref] |
| 322 | [ 0.508913] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] |
| 323 | [ 0.508916] pci_bus 0000:01: resource 5 [io 0x0d00-0x2fff] |
| 324 | [ 0.508919] pci_bus 0000:01: resource 6 [mem 0xf0000000-0xf7ffffff] |
| 325 | [ 0.508922] pci_bus 0000:01: resource 7 [mem 0xfc000000-0xfd2fffff] |
| 326 | [ 0.508925] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff] |
| 327 | [ 0.508928] pci_bus 0000:02: resource 1 [mem 0xfd100000-0xfd1fffff] |
| 328 | [ 0.509001] NET: Registered protocol family 2 |
| 329 | [ 0.515484] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) |
| 330 | [ 0.522800] TCP established hash table entries: 16384 (order: 6, 262144 bytes) |
| 331 | [ 0.534553] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) |
| 332 | [ 0.541464] TCP: Hash tables configured (established 16384 bind 16384) |
| 333 | [ 0.548069] TCP reno registered |
| 334 | [ 0.551272] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| 335 | [ 0.557184] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| 336 | [ 0.563651] NET: Registered protocol family 1 |
| 337 | [ 0.568309] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 23 |
| 338 | [ 0.574280] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 22 |
| 339 | [ 0.580157] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 340 | [ 0.585743] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 341 | [ 0.591328] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 342 | [ 0.596886] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| 343 | [ 0.602530] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 344 | [ 0.608118] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 345 | [ 0.613674] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| 346 | [ 0.619317] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 347 | [ 0.624886] pci 0000:01:00.0: Boot video device |
| 348 | [ 0.625014] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 |
| 349 | [ 0.630867] PCI: CLS 64 bytes, default 64 |
| 350 | [ 0.630944] Unpacking initramfs... |
| 351 | [ 0.984822] Freeing initrd memory: 11784k freed |
| 352 | [ 1.001315] agpgart-amd64 0000:01:00.0: AGP bridge [10de/0181] |
| 353 | [ 1.007248] agpgart-amd64 0000:01:00.0: aperture from AGP @ f0000008fc000000 size 0 MB |
| 354 | [ 1.015261] pci 0000:00:18.3: no usable aperture found |
| 355 | [ 1.020470] pci 0000:00:18.3: consider rebooting with iommu=memaper=2 to get a good aperture |
| 356 | [ 1.029088] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| 357 | [ 1.037246] audit: initializing netlink socket (disabled) |
| 358 | [ 1.042736] type=2000 audit(1463062487.040:1): initialized |
| 359 | [ 1.065212] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 360 | [ 1.071908] VFS: Disk quotas dquot_6.5.2 |
| 361 | [ 1.075939] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 362 | [ 1.082536] msgmni has been set to 989 |
| 363 | [ 1.086547] alg: No test for stdrng (krng) |
| 364 | [ 1.090750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) |
| 365 | [ 1.098246] io scheduler noop registered |
| 366 | [ 1.102240] io scheduler deadline registered |
| 367 | [ 1.106597] io scheduler cfq registered (default) |
| 368 | [ 1.111567] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 369 | [ 1.117240] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 370 | [ 1.123921] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 371 | [ 1.130684] ERST: Table is not found! |
| 372 | [ 1.134412] GHES: HEST is not enabled! |
| 373 | [ 1.138329] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 374 | [ 1.164959] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 375 | [ 1.191332] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A |
| 376 | [ 1.197767] Linux agpgart interface v0.103 |
| 377 | [ 1.202072] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
| 378 | [ 1.212542] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 379 | [ 1.217581] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 380 | [ 1.222851] mousedev: PS/2 mouse device common for all mice |
| 381 | [ 1.228597] rtc_cmos rtc_cmos: RTC can wake from S4 |
| 382 | [ 1.233680] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| 383 | [ 1.240143] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| 384 | [ 1.246939] cpuidle: using governor ladder |
| 385 | [ 1.251104] cpuidle: using governor menu |
| 386 | [ 1.255367] TCP cubic registered |
| 387 | [ 1.258707] NET: Registered protocol family 10 |
| 388 | [ 1.263809] Mobile IPv6 |
| 389 | [ 1.266333] NET: Registered protocol family 17 |
| 390 | [ 1.270858] Registering the dns_resolver key type |
| 391 | [ 1.275793] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 392 | [ 1.284629] PM: Hibernation image not present or could not be loaded. |
| 393 | [ 1.284643] registered taskstats version 1 |
| 394 | [ 1.289070] rtc_cmos rtc_cmos: setting system clock to 2016-05-12 14:14:48 UTC (1463062488) |
| 395 | [ 1.297636] Initializing network drop monitor service |
| 396 | [ 1.304274] Freeing unused kernel memory: 584k freed |
| 397 | [ 1.309813] Write protecting the kernel read-only data: 6144k |
| 398 | [ 1.318906] Freeing unused kernel memory: 640k freed |
| 399 | [ 1.327960] Freeing unused kernel memory: 684k freed |
| 400 | [ 1.356330] udevd[44]: starting version 175 |
| 401 | [ 1.427586] usbcore: registered new interface driver usbfs |
| 402 | [ 1.442306] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. |
| 403 | [ 1.458810] SCSI subsystem initialized |
| 404 | [ 1.483095] Floppy drive(s): fd0 is 1.44M |
| 405 | [ 1.501808] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 21 |
| 406 | [ 1.509172] libata version 3.00 loaded. |
| 407 | [ 1.530643] usbcore: registered new interface driver hub |
| 408 | [ 1.544712] forcedeth 0000:00:0a.0: setting latency timer to 64 |
| 409 | [ 1.552243] usbcore: registered new device driver usb |
| 410 | [ 1.558242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 411 | [ 1.564944] xhci_hcd 0000:02:00.0: setting latency timer to 64 |
| 412 | [ 1.564949] xhci_hcd 0000:02:00.0: xHCI Host Controller |
| 413 | [ 1.581935] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 |
| 414 | [ 1.709522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 415 | [ 1.716387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 416 | [ 1.723730] usb usb1: Product: xHCI Host Controller |
| 417 | [ 1.728681] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd |
| 418 | [ 1.734758] usb usb1: SerialNumber: 0000:02:00.0 |
| 419 | [ 1.739677] xHCI xhci_add_endpoint called for root hub |
| 420 | [ 1.739681] xHCI xhci_check_bandwidth called for root hub |
| 421 | [ 1.739757] hub 1-0:1.0: USB hub found |
| 422 | [ 1.743589] hub 1-0:1.0: 1 port detected |
| 423 | [ 1.747660] xhci_hcd 0000:02:00.0: xHCI Host Controller |
| 424 | [ 1.752967] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 |
| 425 | [ 1.760480] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 |
| 426 | [ 1.767336] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 427 | [ 1.774648] usb usb2: Product: xHCI Host Controller |
| 428 | [ 1.779598] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd |
| 429 | [ 1.785673] usb usb2: SerialNumber: 0000:02:00.0 |
| 430 | [ 1.790520] xHCI xhci_add_endpoint called for root hub |
| 431 | [ 1.790524] xHCI xhci_check_bandwidth called for root hub |
| 432 | [ 1.790595] hub 2-0:1.0: USB hub found |
| 433 | [ 1.794421] hub 2-0:1.0: 1 port detected |
| 434 | [ 1.801709] FDC 0 is a post-1991 82077 |
| 435 | [ 2.036016] Refined TSC clocksource calibration: 2010.302 MHz. |
| 436 | [ 2.041927] Switching to clocksource tsc |
| 437 | [ 2.068725] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d3:16:e4:55 |
| 438 | [ 2.077179] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 |
| 439 | [ 2.084946] pata_amd 0000:00:06.0: version 0.4.1 |
| 440 | [ 2.085013] pata_amd 0000:00:06.0: setting latency timer to 64 |
| 441 | [ 2.085644] scsi0 : pata_amd |
| 442 | [ 2.088812] scsi1 : pata_amd |
| 443 | [ 2.091855] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2820 irq 14 |
| 444 | [ 2.098920] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2828 irq 15 |
| 445 | [ 2.106261] sata_nv 0000:00:07.0: version 3.5 |
| 446 | [ 2.106422] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 |
| 447 | [ 2.112503] sata_nv 0000:00:07.0: setting latency timer to 64 |
| 448 | [ 2.113042] scsi2 : sata_nv |
| 449 | [ 2.116069] scsi3 : sata_nv |
| 450 | [ 2.119035] ata3: SATA max UDMA/133 cmd 0x2850 ctl 0x2878 bmdma 0x2830 irq 20 |
| 451 | [ 2.126252] ata4: SATA max UDMA/133 cmd 0x2858 ctl 0x287c bmdma 0x2838 irq 20 |
| 452 | [ 2.133676] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21 |
| 453 | [ 2.139608] sata_nv 0000:00:08.0: setting latency timer to 64 |
| 454 | [ 2.140187] scsi4 : sata_nv |
| 455 | [ 2.143179] scsi5 : sata_nv |
| 456 | [ 2.146156] ata5: SATA max UDMA/133 cmd 0x2860 ctl 0x2880 bmdma 0x2840 irq 21 |
| 457 | [ 2.153365] ata6: SATA max UDMA/133 cmd 0x2868 ctl 0x2884 bmdma 0x2848 irq 21 |
| 458 | [ 2.161077] ehci_hcd 0000:00:02.1: setting latency timer to 64 |
| 459 | [ 2.161082] ehci_hcd 0000:00:02.1: EHCI Host Controller |
| 460 | [ 2.166513] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 |
| 461 | [ 2.174030] ehci_hcd 0000:00:02.1: debug port 1 |
| 462 | [ 2.178633] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported |
| 463 | [ 2.178661] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfd205000 |
| 464 | [ 2.196008] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| 465 | [ 2.201856] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| 466 | [ 2.208718] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 467 | [ 2.216031] usb usb3: Product: EHCI Host Controller |
| 468 | [ 2.220971] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd |
| 469 | [ 2.227045] usb usb3: SerialNumber: 0000:00:02.1 |
| 470 | [ 2.233014] hub 3-0:1.0: USB hub found |
| 471 | [ 2.238621] hub 3-0:1.0: 10 ports detected |
| 472 | [ 2.277100] ata1.00: HPA detected: current 156250000, native 156301488 |
| 473 | [ 2.283704] ata1.00: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100 |
| 474 | [ 2.290297] ata1.00: 156250000 sectors, multi 0: LBA |
| 475 | [ 2.295415] ata1: nv_mode_filter: 0x3f39f&0xfffff->0x3f39f, BIOS=0x0 (0x0) ACPI=0x0 |
| 476 | [ 2.309027] ata1.00: configured for UDMA/100 |
| 477 | [ 2.313497] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-75CA 16.0 PQ: 0 ANSI: 5 |
| 478 | [ 2.448013] ata3: SATA link down (SStatus 0 SControl 300) |
| 479 | [ 2.486828] ata5: SATA link down (SStatus 0 SControl 300) |
| 480 | [ 2.552008] usb 3-7: new high-speed USB device number 2 using ehci_hcd |
| 481 | [ 2.689150] usb 3-7: New USB device found, idVendor=1058, idProduct=1140 |
| 482 | [ 2.695923] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=5 |
| 483 | [ 2.703125] usb 3-7: Product: My Book 1140 |
| 484 | [ 2.707287] usb 3-7: Manufacturer: Western Digital |
| 485 | [ 2.712145] usb 3-7: SerialNumber: 354C52375247444D |
| 486 | [ 2.721847] Initializing USB Mass Storage driver... |
| 487 | [ 2.726964] scsi6 : usb-storage 3-7:1.0 |
| 488 | [ 2.731314] usbcore: registered new interface driver usb-storage |
| 489 | [ 2.737416] USB Mass Storage support registered. |
| 490 | [ 2.800012] ata4: SATA link down (SStatus 0 SControl 300) |
| 491 | [ 3.116009] ata6: SATA link down (SStatus 0 SControl 300) |
| 492 | [ 3.122751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 493 | [ 3.142737] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) |
| 494 | [ 3.150818] ohci_hcd 0000:00:02.0: setting latency timer to 64 |
| 495 | [ 3.150823] ohci_hcd 0000:00:02.0: OHCI Host Controller |
| 496 | [ 3.156173] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 4 |
| 497 | [ 3.163749] sd 0:0:0:0: [sda] Write Protect is off |
| 498 | [ 3.168604] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 499 | [ 3.168628] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 500 | [ 3.177811] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfd200000 |
| 501 | [ 3.207368] sda: sda1 sda2 |
| 502 | [ 3.210709] sd 0:0:0:0: [sda] Attached SCSI disk |
| 503 | [ 3.218443] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 504 | [ 3.238046] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| 505 | [ 3.244916] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 506 | [ 3.252226] usb usb4: Product: OHCI Host Controller |
| 507 | [ 3.257167] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd |
| 508 | [ 3.263241] usb usb4: SerialNumber: 0000:00:02.0 |
| 509 | [ 3.272652] hub 4-0:1.0: USB hub found |
| 510 | [ 3.276495] hub 4-0:1.0: 10 ports detected |
| 511 | [ 3.604498] microcode: CPU0: family 15 not supported |
| 512 | [ 3.611901] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 513 | [ 3.629791] device-mapper: uevent: version 1.0.3 |
| 514 | [ 3.635091] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com |
| 515 | [ 3.672245] Btrfs loaded |
| 516 | [ 3.729276] scsi 6:0:0:0: Direct-Access WD My Book 1140 1019 PQ: 0 ANSI: 6 |
| 517 | [ 3.742829] scsi 6:0:0:1: Enclosure WD SES Device 1019 PQ: 0 ANSI: 6 |
| 518 | [ 3.763206] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| 519 | [ 3.768935] sd 6:0:0:0: [sdb] 19522816 4096-byte logical blocks: (79.9 GB/74.4 GiB) |
| 520 | [ 3.782245] scsi 6:0:0:1: Attached scsi generic sg2 type 13 |
| 521 | [ 3.788697] sd 6:0:0:0: [sdb] Write Protect is off |
| 522 | [ 3.793590] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08 |
| 523 | [ 3.796060] sd 6:0:0:0: [sdb] No Caching mode page found |
| 524 | [ 3.801444] sd 6:0:0:0: [sdb] Assuming drive cache: write through |
| 525 | [ 3.808664] sd 6:0:0:0: [sdb] 19522816 4096-byte logical blocks: (79.9 GB/74.4 GiB) |
| 526 | [ 3.817904] sd 6:0:0:0: [sdb] No Caching mode page found |
| 527 | [ 3.823284] sd 6:0:0:0: [sdb] Assuming drive cache: write through |
| 528 | [ 8.869539] sdb: unknown partition table |
| 529 | [ 8.875436] sd 6:0:0:0: [sdb] 19522816 4096-byte logical blocks: (79.9 GB/74.4 GiB) |
| 530 | [ 8.887574] sd 6:0:0:0: [sdb] No Caching mode page found |
| 531 | [ 8.892989] sd 6:0:0:0: [sdb] Assuming drive cache: write through |
| 532 | [ 8.899152] sd 6:0:0:0: [sdb] Attached SCSI disk |
| 533 | [ 8.956499] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) |
| 534 | [ 9.021185] ses 6:0:0:1: Attached Enclosure device |
| 535 | [ 11.027943] udevd[317]: starting version 175 |
| 536 | [ 11.631664] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| 537 | [ 11.652200] ACPI: Power Button [PWRF] |
| 538 | [ 11.809479] input: PC Speaker as /devices/platform/pcspkr/input/input2 |
| 539 | [ 11.997915] EDAC MC: Ver: 2.1.0 |
| 540 | [ 12.019601] MCE: In-kernel MCE decoding enabled. |
| 541 | [ 12.028545] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00) |
| 542 | [ 12.038088] powernow-k8: fid 0xc (2000 MHz), vid 0x4 |
| 543 | [ 12.043154] powernow-k8: fid 0xa (1800 MHz), vid 0x8 |
| 544 | [ 12.048183] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 |
| 545 | [ 12.053299] powernow-k8: failing init, change pending bit set |
| 546 | [ 12.126892] AMD64 EDAC driver v3.4.0 |
| 547 | [ 12.131099] EDAC amd64: DRAM ECC disabled. |
| 548 | [ 12.135292] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| 549 | [ 12.135294] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| 550 | [ 12.135296] (Note that use of the override may cause unknown side effects.) |
| 551 | [ 12.260139] parport_pc 00:03: reported by Plug and Play ACPI |
| 552 | [ 12.266368] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] |
| 553 | [ 12.292887] [drm] Initialized drm 1.1.0 20060810 |
| 554 | [ 12.343906] i2c i2c-0: nForce2 SMBus adapter at 0x2480 |
| 555 | [ 12.349428] i2c i2c-1: nForce2 SMBus adapter at 0x24c0 |
| 556 | [ 12.505536] wmi: Mapper loaded |
| 557 | [ 12.860633] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 |
| 558 | [ 12.867399] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018100a3) |
| 559 | [ 12.876682] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS |
| 560 | [ 12.948346] [drm] nouveau 0000:01:00.0: ... appears to be valid |
| 561 | [ 12.954336] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN |
| 562 | [ 12.960692] [drm] nouveau 0000:01:00.0: BMP BIOS found |
| 563 | [ 12.965897] [drm] nouveau 0000:01:00.0: BMP version 5.38 |
| 564 | [ 12.971280] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.21 |
| 565 | [ 12.978612] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do |
| 566 | [ 12.985504] [drm] nouveau 0000:01:00.0: DCB version 2.2 |
| 567 | [ 12.990799] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00009c40 |
| 568 | [ 12.997392] [drm] nouveau 0000:01:00.0: DCB outp 01: 02010310 00009c40 |
| 569 | [ 13.004009] [drm] nouveau 0000:01:00.0: DCB outp 02: 01010312 00000000 |
| 570 | [ 13.010683] [drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000003 |
| 571 | [ 13.017603] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode |
| 572 | [ 13.025011] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x71CA |
| 573 | [ 13.032812] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x76A5 |
| 574 | [ 13.040590] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x7310 |
| 575 | [ 13.063281] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x79CB |
| 576 | [ 13.071035] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x79E8 |
| 577 | [ 13.078785] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x74EF |
| 578 | [ 13.102969] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x7640 |
| 579 | [ 13.111068] [TTM] Zone kernel: Available graphics memory: 254278 kiB |
| 580 | [ 13.117616] [TTM] Initializing pool allocator |
| 581 | [ 13.122293] [TTM] Initializing DMA pool allocator |
| 582 | [ 13.127095] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1) |
| 583 | [ 13.137913] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) |
| 584 | [ 13.143937] [drm] nouveau 0000:01:00.0: Saving VGA fonts |
| 585 | [ 13.218883] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). |
| 586 | [ 13.225599] [drm] No driver support for vblank timestamp query. |
| 587 | [ 13.237676] [drm] nouveau 0000:01:00.0: 0 available performance level(s) |
| 588 | [ 13.244458] [drm] nouveau 0000:01:00.0: c: core 274MHz memory 405MHz |
| 589 | [ 13.251340] [drm] nouveau 0000:01:00.0: 0xDD32: Parsing digital output script table |
| 590 | [ 13.277474] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) |
| 591 | [ 13.306581] ACPI: PCI Interrupt Link [LAUD] enabled at IRQ 23 |
| 592 | [ 13.312439] snd_intel8x0 0000:00:04.0: setting latency timer to 64 |
| 593 | [ 13.392235] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88001d73f400 |
| 594 | [ 13.401259] fbcon: nouveaufb (fb0) is primary device |
| 595 | [ 14.066052] [drm] nouveau 0000:01:00.0: 0xDD32: Parsing digital output script table |
| 596 | [ 14.071654] Console: switching to colour frame buffer device 160x64 |
| 597 | [ 14.093666] fb0: nouveaufb frame buffer device |
| 598 | [ 14.098224] drm: registered panic notifier |
| 599 | [ 14.104841] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 |
| 600 | [ 14.180013] intel8x0_measure_ac97_clock: measured 52523 usecs (2584 samples) |
| 601 | [ 14.187119] intel8x0: clocking to 46832 |
| 602 | [ 15.873298] Adding 8387580k swap on /dev/sda1. Priority:-1 extents:1 across:8387580k |
| 603 | [ 15.904611] EXT4-fs (sda2): re-mounted. Opts: (null) |
| 604 | [ 16.165708] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro |
| 605 | [ 16.298380] loop: module loaded |
| 606 | [ 16.395898] w83627hf: w83627hf: Found W83627THF chip at 0x290 |
| 607 | [ 17.734544] NET: Registered protocol family 8 |
| 608 | [ 17.738948] NET: Registered protocol family 20 |
| 609 | [ 20.782481] Bluetooth: Core ver 2.16 |
| 610 | [ 20.786881] NET: Registered protocol family 31 |
| 611 | [ 20.791867] Bluetooth: HCI device and connection manager initialized |
| 612 | [ 20.798723] Bluetooth: HCI socket layer initialized |
| 613 | [ 20.804099] Bluetooth: L2CAP socket layer initialized |
| 614 | [ 20.810171] Bluetooth: SCO socket layer initialized |
| 615 | [ 20.912115] Bluetooth: RFCOMM TTY layer initialized |
| 616 | [ 20.917976] Bluetooth: RFCOMM socket layer initialized |
| 617 | [ 20.923621] Bluetooth: RFCOMM ver 1.11 |
| 618 | [ 20.930880] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 619 | [ 20.936711] Bluetooth: BNEP filters: protocol multicast |
| 620 | [ 21.080236] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00) |
| 621 | [ 21.089695] powernow-k8: fid 0xc (2000 MHz), vid 0x4 |
| 622 | [ 21.095152] powernow-k8: fid 0xa (1800 MHz), vid 0x8 |
| 623 | [ 21.100598] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 |
| 624 | [ 21.106129] powernow-k8: failing init, change pending bit set |