blob: 87ef3a813f52586a2d47002fe5cfb35be5f9b60d [file] [log] [blame]
BSI coreboot labd1170272016-02-11 13:40:51 +00001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: Qemu q35/q35, BIOS RAPTOR-NORMAL 02/11/2016
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] PAT not supported by CPU.
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff]
42[ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff]
44[ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f5f1000-0x1fe7afff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F7150 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBADC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9280 001B38 (v01 CORE COREBOOT 00000002 INTL 20150619)
58[ 0.000000] ACPI: FACS 0x000000001FFB9240 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAEC0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000001FFBAF00 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000001FFBAF40 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HPET 0x000000001FFBAFA0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
66[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
67[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
68[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
69[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
70[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0
71[ 0.000000] Zone ranges:
72[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
73[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
74[ 0.000000] Normal empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
78[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
79[ 0.000000] On node 0 totalpages: 130878
80[ 0.000000] DMA zone: 56 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 1735 pages used for memmap
84[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
85[ 0.000000] ACPI: PM-Timer IO Port: 0x608
86[ 0.000000] ACPI: Local APIC address 0xfee00000
87[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
88[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
89[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ2 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
103[ 0.000000] Booting paravirtualized kernel on KVM
104[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152
106[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
107[ 0.000000] pcpu-alloc: [0] 0
108[ 0.000000] KVM setup async PF for cpu 0
109[ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080
110[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
111[ 0.000000] Policy zone: DMA32
112[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
113[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
114[ 0.000000] AGP: Checking aperture...
115[ 0.000000] AGP: No AGP bridge found
116[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
119[ 0.000000] Hierarchical RCU implementation.
120[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
121[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
122[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
123[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
124[ 0.000000] Console: colour VGA+ 80x25
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2393.998 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4787.99 BogoMIPS (lpj=9575992)
129[ 0.008000] pid_max: default: 32768 minimum: 301
130[ 0.008000] ACPI: Core revision 20140424
131[ 0.008310] ACPI: All ACPI Tables successfully acquired
132[ 0.009187] Security Framework initialized
133[ 0.009830] AppArmor: AppArmor disabled by boot time parameter
134[ 0.010721] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.011776] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.012108] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.013230] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.014263] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.016187] Initializing cgroup subsys memory
140[ 0.016889] Initializing cgroup subsys devices
141[ 0.017584] Initializing cgroup subsys freezer
142[ 0.018281] Initializing cgroup subsys net_cls
143[ 0.018976] Initializing cgroup subsys blkio
144[ 0.019647] Initializing cgroup subsys perf_event
145[ 0.020006] Initializing cgroup subsys net_prio
146[ 0.020781] mce: CPU supports 10 MCE banks
147[ 0.021463] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: 6
150[ 0.032900] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.036857] ftrace: allocating 21601 entries in 85 pages
152[ 0.044977] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.045846] smpboot: CPU0: Intel QEMU Virtual CPU version 2.0.0 (fam: 06, model: 02, stepping: 03)
154[ 0.048000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
155[ 0.048000] x86: Booted up 1 node, 1 CPUs
156[ 0.048000] smpboot: Total of 1 processors activated (4787.99 BogoMIPS)
157[ 0.048235] NMI watchdog: disabled (cpu0): hardware events not enabled
158[ 0.049304] devtmpfs: initialized
159[ 0.054702] pinctrl core: initialized pinctrl subsystem
160[ 0.055566] NET: Registered protocol family 16
161[ 0.056124] cpuidle: using governor ladder
162[ 0.056765] cpuidle: using governor menu
163[ 0.057418] ACPI: bus type PCI registered
164[ 0.058031] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
165[ 0.059112] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
166[ 0.060006] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
167[ 0.061532] PCI: Using configuration type 1 for base access
168[ 0.063150] ACPI: Added _OSI(Module Device)
169[ 0.064002] ACPI: Added _OSI(Processor Device)
170[ 0.064690] ACPI: Added _OSI(3.0 _SCP Extensions)
171[ 0.065403] ACPI: Added _OSI(Processor Aggregator Device)
172[ 0.069204] ACPI: Interpreter enabled
173[ 0.069781] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
174[ 0.071195] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
175[ 0.072346] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
176[ 0.073763] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
177[ 0.075169] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
178[ 0.076830] ACPI: (supports S0)
179[ 0.077329] ACPI: Using IOAPIC for interrupt routing
180[ 0.078101] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
181[ 0.081354] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
182[ 0.082298] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
183[ 0.083652] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
184[ 0.084095] PCI host bridge to bus 0000:00
185[ 0.084721] pci_bus 0000:00: root bus resource [bus 00-ff]
186[ 0.085549] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
187[ 0.086476] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
188[ 0.088003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
189[ 0.089042] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
190[ 0.090098] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
191[ 0.090385] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
192[ 0.093076] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
193[ 0.095323] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
194[ 0.106159] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
195[ 0.106298] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
196[ 0.108004] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
197[ 0.110073] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
198[ 0.120004] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
199[ 0.120296] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
200[ 0.120594] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
201[ 0.121791] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
202[ 0.123020] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
203[ 0.134057] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
204[ 0.136004] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
205[ 0.138362] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
206[ 0.138521] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
207[ 0.138955] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
208[ 0.140364] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
209[ 0.141406] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
210[ 0.142442] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
211[ 0.143477] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
212[ 0.144358] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
213[ 0.145400] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
214[ 0.146427] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
215[ 0.147402] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
216[ 0.148148] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
217[ 0.148969] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
218[ 0.149782] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
219[ 0.150597] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
220[ 0.151409] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
221[ 0.152147] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
222[ 0.153318] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
223[ 0.154870] ACPI: Enabled 16 GPEs in block 00 to 3F
224[ 0.156154] vgaarb: setting as boot device: PCI:0000:00:01.0
225[ 0.157491] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
226[ 0.159356] vgaarb: loaded
227[ 0.160003] vgaarb: bridge control possible 0000:00:01.0
228[ 0.161325] PCI: Using ACPI for IRQ routing
229[ 0.237714] PCI: pci_cache_line_size set to 64 bytes
230[ 0.237838] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
231[ 0.237841] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
232[ 0.238056] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
233[ 0.239262] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
234[ 0.240120] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
235[ 0.244065] Switched to clocksource kvm-clock
236[ 0.252517] pnp: PnP ACPI init
237[ 0.253293] ACPI: bus type PNP registered
238[ 0.254330] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
239[ 0.254412] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
240[ 0.254484] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
241[ 0.254634] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
242[ 0.254740] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
243[ 0.255149] pnp: PnP ACPI: found 5 devices
244[ 0.256144] ACPI: bus type PNP unregistered
245[ 0.264193] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
246[ 0.265651] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
247[ 0.265654] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
248[ 0.265657] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
249[ 0.265660] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
250[ 0.265694] NET: Registered protocol family 2
251[ 0.266937] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
252[ 0.268651] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
253[ 0.270163] TCP: Hash tables configured (established 4096 bind 4096)
254[ 0.271643] TCP: reno registered
255[ 0.272428] UDP hash table entries: 256 (order: 1, 8192 bytes)
256[ 0.273797] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.275291] NET: Registered protocol family 1
258[ 0.276378] pci 0000:00:01.0: Video device with shadowed ROM
259[ 0.276445] PCI: CLS 64 bytes, default 64
260[ 0.276497] Unpacking initramfs...
261[ 0.531252] Freeing initrd memory: 8744K (ffff88001f5f1000 - ffff88001fe7b000)
262[ 0.533231] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1
263[ 0.534584] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
264[ 0.536946] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.538407] audit: initializing netlink subsys (disabled)
266[ 0.539686] audit: type=2000 audit(1455197832.602:1): initialized
267[ 0.541518] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.543033] zbud: loaded
269[ 0.543853] VFS: Disk quotas dquot_6.5.2
270[ 0.544841] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.546407] msgmni has been set to 983
272[ 0.547647] alg: No test for stdrng (krng)
273[ 0.548686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.550463] io scheduler noop registered
275[ 0.551406] io scheduler deadline registered
276[ 0.552484] io scheduler cfq registered (default)
277[ 0.553674] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.554997] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.556627] intel_idle: does not run on family 6 model 2
280[ 0.556660] GHES: HEST is not enabled!
281[ 0.557645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
282[ 0.588558] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
283[ 0.590725] Linux agpgart interface v0.103
284[ 0.591853] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
285[ 0.594625] serio: i8042 KBD port at 0x60,0x64 irq 1
286[ 0.595797] serio: i8042 AUX port at 0x60,0x64 irq 12
287[ 0.597245] mousedev: PS/2 mouse device common for all mice
288[ 0.598933] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
289[ 0.601213] rtc_cmos 00:00: RTC can wake from S4
290[ 0.602649] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
291[ 0.604320] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
292[ 0.606139] ledtrig-cpu: registered to indicate activity on CPUs
293[ 0.607625] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
294[ 0.609151] AMD IOMMUv2 functionality not available on this system
295[ 0.610718] TCP: cubic registered
296[ 0.611521] NET: Registered protocol family 10
297[ 0.612806] mip6: Mobile IPv6
298[ 0.613525] NET: Registered protocol family 17
299[ 0.614566] mpls_gso: MPLS GSO support
300[ 0.615732] registered taskstats version 1
301[ 0.617112] rtc_cmos 00:00: setting system clock to 2016-02-11 13:37:12 UTC (1455197832)
302[ 0.619037] PM: Hibernation image not present or could not be loaded.
303[ 0.620662] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
304[ 0.622496] Write protecting the kernel read-only data: 8192k
305[ 0.627153] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
306[ 0.629752] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
307[ 0.644200] systemd-udevd[52]: starting version 215
308[ 0.645730] random: systemd-udevd urandom read with 1 bits of entropy available
309[ 0.654889] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
310[ 0.655966] e1000: Copyright (c) 1999-2006 Intel Corporation.
311[ 0.664698] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
312[ 0.992495] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
313[ 0.993561] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
314[ 0.999936] FS-Cache: Loaded
315[ 1.002756] RPC: Registered named UNIX socket transport module.
316[ 1.003660] RPC: Registered udp transport module.
317[ 1.004384] RPC: Registered tcp transport module.
318[ 1.005104] RPC: Registered tcp NFSv4.1 backchannel transport module.
319[ 1.008956] FS-Cache: Netfs 'nfs' registered for caching
320[ 1.016334] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
321[ 1.532424] tsc: Refined TSC clocksource calibration: 2394.000 MHz
322[ 3.020896] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
323[ 3.023136] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
324[ 4.534631] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
325[ 4.537801] systemd[1]: Detected virtualization 'kvm'.
326[ 4.539028] systemd[1]: Detected architecture 'x86-64'.
327[ 4.779065] systemd[1]: Inserted module 'autofs4'
328[ 4.782586] systemd[1]: Set hostname to <cb-test-tgt>.
329[ 5.407630] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
330[ 5.410735] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
331[ 5.414698] systemd[1]: Expecting device dev-ttyS0.device...
332[ 5.417803] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
333[ 5.419711] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
334[ 5.421552] systemd[1]: Starting Remote File Systems (Pre).
335[ 5.424949] systemd[1]: Reached target Remote File Systems (Pre).
336[ 5.426420] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
337[ 5.430980] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
338[ 5.433213] systemd[1]: Starting Encrypted Volumes.
339[ 5.436262] systemd[1]: Reached target Encrypted Volumes.
340[ 5.437576] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
341[ 5.439492] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
342[ 5.441396] systemd[1]: Starting Paths.
343[ 5.444136] systemd[1]: Reached target Paths.
344[ 5.445182] systemd[1]: Starting Swap.
345[ 5.447828] systemd[1]: Reached target Swap.
346[ 5.448892] systemd[1]: Starting Root Slice.
347[ 5.451597] systemd[1]: Created slice Root Slice.
348[ 5.452755] systemd[1]: Starting Delayed Shutdown Socket.
349[ 5.456198] systemd[1]: Listening on Delayed Shutdown Socket.
350[ 5.457562] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
351[ 5.462387] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
352[ 5.464054] systemd[1]: Starting Journal Socket (/dev/log).
353[ 5.468278] systemd[1]: Listening on Journal Socket (/dev/log).
354[ 5.469708] systemd[1]: Starting udev Kernel Socket.
355[ 5.472777] systemd[1]: Listening on udev Kernel Socket.
356[ 5.474057] systemd[1]: Starting udev Control Socket.
357[ 5.477158] systemd[1]: Listening on udev Control Socket.
358[ 5.478446] systemd[1]: Starting User and Session Slice.
359[ 5.481695] systemd[1]: Created slice User and Session Slice.
360[ 5.483063] systemd[1]: Starting Journal Socket.
361[ 5.485965] systemd[1]: Listening on Journal Socket.
362[ 5.487166] systemd[1]: Starting System Slice.
363[ 5.490043] systemd[1]: Created slice System Slice.
364[ 5.491231] systemd[1]: Starting Increase datagram queue length...
365[ 5.504746] systemd[1]: Starting Load Kernel Modules...
366[ 5.508115] systemd[1]: Mounting Huge Pages File System...
367[ 5.514782] systemd[1]: Mounting POSIX Message Queue File System...
368[ 5.544960] systemd[1]: Started Set Up Additional Binary Formats.
369[ 5.558420] random: nonblocking pool is initialized
370[ 5.720838] systemd[1]: Starting Create list of required static device nodes for the current kernel...
371[ 5.737955] systemd[1]: Mounting Debug File System...
372[ 5.751592] systemd[1]: Starting udev Coldplug all Devices...
373[ 5.779325] systemd[1]: Starting system-getty.slice.
374[ 5.828737] systemd[1]: Created slice system-getty.slice.
375[ 5.831249] systemd[1]: Starting system-serial\x2dgetty.slice.
376[ 5.834808] systemd[1]: Created slice system-serial\x2dgetty.slice.
377[ 5.838331] systemd[1]: Starting Slices.
378[ 5.853635] systemd[1]: Reached target Slices.
379[ 5.855348] systemd[1]: Starting Remount Root and Kernel File Systems...
380[ 5.873062] systemd[1]: Mounted Huge Pages File System.
381[ 5.889752] systemd[1]: Mounted Debug File System.
382[ 5.897720] systemd[1]: Mounted POSIX Message Queue File System.
383[ 5.907067] systemd[1]: Started Increase datagram queue length.
384[ 5.912186] systemd[1]: Started Load Kernel Modules.
385[ 5.918009] systemd[1]: Started Create list of required static device nodes for the current kernel.
386[ 5.925517] systemd[1]: Started Remount Root and Kernel File Systems.
387[ 5.949291] systemd[1]: Started udev Coldplug all Devices.
388[ 5.980645] systemd[1]: Started Various fixups to make systemd work better on Debian.
389[ 5.982501] systemd[1]: Starting Load/Save Random Seed...
390[ 5.985954] systemd[1]: Starting Create Static Device Nodes in /dev...
391[ 5.990373] systemd[1]: Starting Apply Kernel Variables...
392[ 5.997196] systemd[1]: Mounted Configuration File System.
393[ 5.999227] systemd[1]: Mounted FUSE Control File System.
394[ 6.001751] systemd[1]: Starting Syslog Socket.
395[ 6.007334] systemd[1]: Listening on Syslog Socket.
396[ 6.015893] systemd[1]: Starting Sockets.
397[ 6.026439] systemd[1]: Reached target Sockets.
398[ 6.029014] systemd[1]: Starting Journal Service...
399[ 6.039771] systemd[1]: Started Journal Service.
400[ 6.336646] systemd-udevd[127]: starting version 215
401[ 7.317322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
402[ 7.331327] Floppy drive(s): fd0 is 1.44M
403[ 7.341712] parport_pc 00:03: reported by Plug and Play ACPI
404[ 7.344420] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
405[ 7.349009] FDC 0 is a S82078B
406[ 7.351843] ACPI: Power Button [PWRF]
407[ 7.430758] SCSI subsystem initialized
408[ 7.461877] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
409[ 7.468671] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
410[ 7.484837] [drm] Initialized drm 1.1.0 20060810
411[ 7.494570] input: PC Speaker as /devices/platform/pcspkr/input/input3
412[ 7.496581] i801_smbus 0000:00:1f.3: Enabling SMBus device
413[ 7.498210] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
414[ 7.622046] libata version 3.00 loaded.
415[ 7.749466] ahci 0000:00:1f.2: version 3.0
416[ 7.750019] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
417[ 7.750449] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
418[ 7.752259] ahci 0000:00:1f.2: flags: ncq only
419[ 7.777625] scsi0 : ahci
420[ 7.800930] scsi1 : ahci
421[ 7.806257] ppdev: user-space parallel port driver
422[ 7.821359] iTCO_vendor_support: vendor-support=0
423[ 7.822894] scsi2 : ahci
424[ 7.827522] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
425[ 7.828943] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
426[ 7.830470] iTCO_wdt: timeout value out of range, using 30
427[ 7.833628] scsi3 : ahci
428[ 7.836573] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
429[ 7.838490] scsi4 : ahci
430[ 7.840823] scsi5 : ahci
431[ 7.841496] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
432[ 7.843202] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
433[ 7.844869] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
434[ 7.846460] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
435[ 7.848063] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
436[ 7.849660] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
437[ 8.173285] ata1: SATA link down (SStatus 0 SControl 300)
438[ 8.177974] ata2: SATA link down (SStatus 0 SControl 300)
439[ 8.185857] ata6: SATA link down (SStatus 0 SControl 300)
440[ 8.190993] ata5: SATA link down (SStatus 0 SControl 300)
441[ 8.194471] ata3: SATA link down (SStatus 0 SControl 300)
442[ 8.196030] ata4: SATA link down (SStatus 0 SControl 300)
443[ 8.379207] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
444[ 8.573296] Key type dns_resolver registered
445[ 8.667354] NFS: Registering the id_resolver key type
446[ 8.669165] Key type id_resolver registered
447[ 8.675527] Key type id_legacy registered
448[ 8.983398] systemd-journald[124]: Received request to flush runtime journal from PID 1
449[ 9.240717] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
450[ 39.797709] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****