Gitiles
Code Review Sign In
review.coreboot.org / board-status / b4fd84af3d9e71208d797835950b9fd4215f3b4b / . / asus / kfsn4-dre / 4.2-839-g7559946 / 2016-01-19T17:14:44Z / kernel_log.txt
blob: 8b3b9839dc261e9cab38f173245b61916cfd30f9 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand9b5dad12016-01-19 18:10:35 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 01/19/2016
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f0c40-0x000f0c4f] mapped at [ffff8800000f0c40]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F0E10 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7B10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048377
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xa5fa000000-0xa5fbffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5017500K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224584K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour VGA+ 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.650 MHz processor
182[ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.30 BogoMIPS (lpj=7638600)
183[ 0.010794] pid_max: default: 32768 minimum: 301
184[ 0.015450] ACPI: Core revision 20140424
185[ 0.021827] ACPI: All ACPI Tables successfully acquired
186[ 0.027180] Security Framework initialized
187[ 0.031304] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037143] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044880] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.058049] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067797] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074695] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082549] Initializing cgroup subsys memory
194[ 0.086925] Initializing cgroup subsys devices
195[ 0.091386] Initializing cgroup subsys freezer
196[ 0.095848] Initializing cgroup subsys net_cls
197[ 0.100307] Initializing cgroup subsys blkio
198[ 0.104593] Initializing cgroup subsys perf_event
199[ 0.109311] Initializing cgroup subsys net_prio
200[ 0.113891] tseg: 0000000000
201[ 0.113902] CPU: Physical Processor ID: 0
202[ 0.117931] CPU: Processor Core ID: 0
203[ 0.121613] mce: CPU supports 6 MCE banks
204[ 0.125640] LVT offset 0 assigned for vector 0xf9
205[ 0.130369] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145709] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
209[ 0.154713] ftrace: allocating 21601 entries in 85 pages
210[ 0.170114] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215628] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332520] Performance Events: AMD PMU driver.
213[ 0.337089] ... version: 0
214[ 0.341101] ... bit width: 48
215[ 0.345199] ... generic registers: 4
216[ 0.349219] ... value mask: 0000ffffffffffff
217[ 0.354529] ... max period: 00007fffffffffff
218[ 0.359840] ... fixed-purpose events: 0
219[ 0.363870] ... event mask: 000000000000000f
220[ 0.371779] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.379978] x86: Booting SMP configuration:
222[ 0.384171] .... node #0, CPUs: #1 #2 #3
223[ 0.428529] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581134] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585437] smpboot: Total of 8 processors activated (30556.45 BogoMIPS)
226[ 0.597943] devtmpfs: initialized
227[ 0.609877] pinctrl core: initialized pinctrl subsystem
228[ 0.615282] NET: Registered protocol family 16
229[ 0.619946] cpuidle: using governor ladder
230[ 0.624054] cpuidle: using governor menu
231[ 0.627989] node 0 link 1: io port [1000, 3fff]
232[ 0.627993] TOM: 00000000c0000000 aka 3072M
233[ 0.632186] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.632190] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.632194] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.632196] TOM2: 0000000180000000 aka 6144M
237[ 0.636468] bus: [bus 00-05] on node 0 link 1
238[ 0.636470] bus: 00 [io 0x0000-0xffff]
239[ 0.636471] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.636473] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.636580] ACPI: bus type PCI registered
242[ 0.640599] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.647205] PCI: Using configuration type 1 for base access
244[ 0.652780] PCI: Using configuration type 1 for extended access
245[ 0.669373] ACPI: Added _OSI(Module Device)
246[ 0.673567] ACPI: Added _OSI(Processor Device)
247[ 0.678017] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682729] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.691664] ACPI: Interpreter enabled
250[ 0.695348] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
251[ 0.704621] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
252[ 0.713884] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
253[ 0.723157] ACPI: (supports S0 S1 S5)
254[ 0.726828] ACPI: Using IOAPIC for interrupt routing
255[ 0.731845] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
256[ 0.760552] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
257[ 0.766739] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
258[ 0.774947] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
259[ 0.813627] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
260[ 0.823649] PCI host bridge to bus 0000:00
261[ 0.827752] pci_bus 0000:00: root bus resource [bus 00-05]
262[ 0.833243] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
263[ 0.839430] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
264[ 0.846308] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
265[ 0.853187] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
266[ 0.860065] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
267[ 0.866255] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
268[ 0.866454] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
269[ 0.866461] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
270[ 0.866602] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
271[ 0.866613] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
272[ 0.866637] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
273[ 0.866656] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
274[ 0.866704] pci 0000:00:01.1: PME# supported from D3hot D3cold
275[ 0.866807] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
276[ 0.866818] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
277[ 0.866855] pci 0000:00:02.0: supports D1 D2
278[ 0.866874] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
279[ 0.866992] pci 0000:00:02.0: System wakeup disabled by ACPI
280[ 0.872713] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
281[ 0.872722] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
282[ 0.872771] pci 0000:00:02.1: supports D1 D2
283[ 0.872787] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
284[ 0.872844] pci 0000:00:02.1: System wakeup disabled by ACPI
285[ 0.878577] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
286[ 0.878618] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
287[ 0.878638] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
288[ 0.885779] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
289[ 0.892303] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
290[ 0.899442] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
291[ 0.906059] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
292[ 0.906069] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
293[ 0.906074] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
294[ 0.906079] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
295[ 0.906083] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
296[ 0.906088] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
297[ 0.906093] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
298[ 0.906236] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
299[ 0.906246] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
300[ 0.906251] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
301[ 0.906256] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
302[ 0.906260] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
303[ 0.906265] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
304[ 0.906270] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
305[ 0.906423] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
306[ 0.906521] pci 0000:00:09.0: System wakeup disabled by ACPI
307[ 0.912248] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
308[ 0.912300] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.912348] pci 0000:00:0b.0: System wakeup disabled by ACPI
310[ 0.918068] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
311[ 0.918123] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
312[ 0.918191] pci 0000:00:0c.0: System wakeup disabled by ACPI
313[ 0.923914] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
314[ 0.923953] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
315[ 0.924010] pci 0000:00:0d.0: System wakeup disabled by ACPI
316[ 0.929727] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
317[ 0.929776] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
318[ 0.929840] pci 0000:00:0e.0: System wakeup disabled by ACPI
319[ 0.935567] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
320[ 0.935706] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
321[ 0.935831] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
322[ 0.935950] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
323[ 0.936082] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
324[ 0.936203] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
325[ 0.936350] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
326[ 0.936472] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
327[ 0.936601] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
328[ 0.936743] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
329[ 0.936945] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
330[ 0.936964] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
331[ 0.936974] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
332[ 0.936981] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
333[ 0.937029] pci 0000:01:04.0: supports D1 D2
334[ 0.937128] pci 0000:00:09.0: PCI bridge to [bus 01]
335[ 0.942104] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
336[ 0.942108] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
337[ 0.942111] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
338[ 0.942229] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
339[ 0.942269] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
340[ 0.942313] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
341[ 0.942392] pci 0000:02:00.0: PME# supported from D3hot D3cold
342[ 0.942471] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
343[ 0.952472] pci 0000:00:0b.0: PCI bridge to [bus 02]
344[ 0.957439] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
345[ 0.957546] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.957582] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
347[ 0.957685] pci 0000:03:00.0: PME# supported from D3hot D3cold
348[ 0.957782] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
349[ 0.967778] pci 0000:00:0c.0: PCI bridge to [bus 03]
350[ 0.972747] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
351[ 0.972823] pci 0000:00:0d.0: PCI bridge to [bus 04]
352[ 0.977872] pci 0000:00:0e.0: PCI bridge to [bus 05]
353[ 0.982872] pci_bus 0000:00: on NUMA node 0
354[ 0.982971] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
355[ 0.989124] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
356[ 0.995275] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
357[ 1.002600] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
358[ 1.009905] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
359[ 1.017220] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
360[ 1.024517] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
361[ 1.030663] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
362[ 1.036817] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
363[ 1.044175] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.051459] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
365[ 1.058833] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
366[ 1.064979] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
367[ 1.071120] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
368[ 1.078440] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
369[ 1.085755] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
370[ 1.093069] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
371[ 1.101608] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
372[ 1.108096] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
373[ 1.114561] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
374[ 1.121040] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
375[ 1.127764] ACPI: Enabled 1 GPEs in block 00 to 1F
376[ 1.132888] vgaarb: setting as boot device: PCI:0000:01:04.0
377[ 1.138559] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
378[ 1.146647] vgaarb: loaded
379[ 1.149363] vgaarb: bridge control possible 0000:01:04.0
380[ 1.154849] PCI: Using ACPI for IRQ routing
381[ 1.159045] PCI: pci_cache_line_size set to 64 bytes
382[ 1.159102] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
383[ 1.159105] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
384[ 1.159428] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
385[ 1.166476] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
386[ 1.171550] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
387[ 1.180241] Switched to clocksource hpet
388[ 1.195823] pnp: PnP ACPI init
389[ 1.198939] ACPI: bus type PNP registered
390[ 1.203497] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
391[ 1.203577] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
392[ 1.203674] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
393[ 1.203752] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.203792] pnp 00:04: [dma 2]
395[ 1.203838] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
396[ 1.203859] pnp: PnP ACPI: found 5 devices
397[ 1.207967] ACPI: bus type PNP unregistered
398[ 1.219978] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
399[ 1.229935] pci 0000:00:09.0: PCI bridge to [bus 01]
400[ 1.234912] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
401[ 1.241011] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
402[ 1.247803] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
403[ 1.255034] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
404[ 1.262265] pci 0000:00:0b.0: PCI bridge to [bus 02]
405[ 1.267235] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
406[ 1.274030] pci 0000:00:0c.0: PCI bridge to [bus 03]
407[ 1.279001] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
408[ 1.285797] pci 0000:00:0d.0: PCI bridge to [bus 04]
409[ 1.290767] pci 0000:00:0e.0: PCI bridge to [bus 05]
410[ 1.295741] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
411[ 1.295744] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
412[ 1.295747] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
413[ 1.295749] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
414[ 1.295752] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
415[ 1.295755] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
416[ 1.295758] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
417[ 1.295760] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
418[ 1.295763] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
419[ 1.295766] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
420[ 1.295912] NET: Registered protocol family 2
421[ 1.300816] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
422[ 1.308500] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
423[ 1.315833] TCP: Hash tables configured (established 65536 bind 65536)
424[ 1.322437] TCP: reno registered
425[ 1.325701] UDP hash table entries: 4096 (order: 5, 131072 bytes)
426[ 1.331913] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.338695] NET: Registered protocol family 1
428[ 1.343439] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
429[ 1.349534] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
430[ 1.355435] pci 0000:00:00.0: Found enabled HT MSI Mapping
431[ 1.360966] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.366471] pci 0000:00:0b.0: Found disabled HT MSI Mapping
433[ 1.372061] pci 0000:00:00.0: Found enabled HT MSI Mapping
434[ 1.377597] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.383105] pci 0000:00:0c.0: Found disabled HT MSI Mapping
436[ 1.388688] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.394226] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.399731] pci 0000:00:0d.0: Found disabled HT MSI Mapping
439[ 1.405302] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.410867] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.416367] pci 0000:00:0e.0: Found disabled HT MSI Mapping
442[ 1.421937] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.427476] pci 0000:01:04.0: Video device with shadowed ROM
444[ 1.427485] PCI: CLS 64 bytes, default 64
445[ 1.427594] Unpacking initramfs...
446[ 1.660185] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
447[ 1.668054] PCI-DMA: Disabling AGP.
448[ 1.673144] PCI-DMA: aperture base @ b4000000 size 65536 KB
449[ 1.678728] PCI-DMA: using GART IOMMU.
450[ 1.682486] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
451[ 1.694511] platform rtc_cmos: registered platform RTC device (no PNP device found)
452[ 1.702700] microcode: CPU0: patch_level=0x01000084
453[ 1.707587] microcode: CPU1: patch_level=0x01000084
454[ 1.712482] microcode: CPU2: patch_level=0x01000084
455[ 1.717384] microcode: CPU3: patch_level=0x01000084
456[ 1.722292] microcode: CPU4: patch_level=0x01000084
457[ 1.727189] microcode: CPU5: patch_level=0x01000084
458[ 1.732090] microcode: CPU6: patch_level=0x01000084
459[ 1.736987] microcode: CPU7: patch_level=0x01000084
460[ 1.741984] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
461[ 1.750788] LVT offset 1 assigned for vector 0x400
462[ 1.755602] IBS: LVT offset 1 assigned
463[ 1.759393] perf: AMD IBS detected (0x00000007)
464[ 1.764550] futex hash table entries: 2048 (order: 5, 131072 bytes)
465[ 1.770938] audit: initializing netlink subsys (disabled)
466[ 1.776372] audit: type=2000 audit(1453226918.520:1): initialized
467[ 1.783251] HugeTLB registered 2 MB page size, pre-allocated 0 pages
468[ 1.789658] zbud: loaded
469[ 1.792562] VFS: Disk quotas dquot_6.5.2
470[ 1.796533] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
471[ 1.803079] msgmni has been set to 9945
472[ 1.807455] alg: No test for stdrng (krng)
473[ 1.811625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
474[ 1.819125] io scheduler noop registered
475[ 1.823055] io scheduler deadline registered
476[ 1.827417] io scheduler cfq registered (default)
477[ 1.832343] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
478[ 1.832467] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
479[ 1.832586] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
480[ 1.832704] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
481[ 1.832867] aer 0000:00:0b.0:pcie02: service driver aer loaded
482[ 1.832895] aer 0000:00:0c.0:pcie02: service driver aer loaded
483[ 1.832921] aer 0000:00:0d.0:pcie02: service driver aer loaded
484[ 1.832948] aer 0000:00:0e.0:pcie02: service driver aer loaded
485[ 1.832967] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
486[ 1.839936] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
487[ 1.846471] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
488[ 1.846482] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
489[ 1.853446] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
490[ 1.859978] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
491[ 1.859988] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
492[ 1.866951] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
493[ 1.866961] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
494[ 1.873925] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
495[ 1.873955] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
496[ 1.879562] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
497[ 1.886296] GHES: HEST is not enabled!
498[ 1.890187] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
499[ 1.916778] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
500[ 1.944461] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
501[ 1.952391] Linux agpgart interface v0.103
502[ 1.956704] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
503[ 1.967062] serio: i8042 KBD port at 0x60,0x64 irq 1
504[ 1.972049] serio: i8042 AUX port at 0x60,0x64 irq 12
505[ 1.977339] mousedev: PS/2 mouse device common for all mice
506[ 1.983010] rtc_cmos rtc_cmos: RTC can wake from S4
507[ 1.988138] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
508[ 1.994536] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
509[ 2.002408] ledtrig-cpu: registered to indicate activity on CPUs
510[ 2.008686] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
511[ 2.015146] AMD IOMMUv2 functionality not available on this system
512[ 2.021500] TCP: cubic registered
513[ 2.024908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
514[ 2.033666] NET: Registered protocol family 10
515[ 2.038534] mip6: Mobile IPv6
516[ 2.041519] NET: Registered protocol family 17
517[ 2.045975] mpls_gso: MPLS GSO support
518[ 2.050602] registered taskstats version 1
519[ 2.055469] rtc_cmos rtc_cmos: setting system clock to 2016-01-19 18:08:40 UTC (1453226920)
520[ 2.063894] PM: Hibernation image not present or could not be loaded.
521[ 2.065728] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
522[ 2.073583] Write protecting the kernel read-only data: 8192k
523[ 2.082833] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
524[ 2.091429] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
525[ 2.115467] systemd-udevd[99]: starting version 215
526[ 2.121265] random: systemd-udevd urandom read with 3 bits of entropy available
527[ 2.152257] pps_core: LinuxPPS API ver. 1 registered
528[ 2.157281] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
529[ 2.166808] ACPI: bus type USB registered
530[ 2.171025] usbcore: registered new interface driver usbfs
531[ 2.171088] PTP clock support registered
532[ 2.180547] usbcore: registered new interface driver hub
533[ 2.186138] usbcore: registered new device driver usb
534[ 2.186252] tg3.c:v3.137 (May 11, 2014)
535[ 2.186266] tg3 0000:02:00.0: enabling device (0004 -> 0006)
536[ 2.186473] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
537[ 2.207816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
538[ 2.215116] ehci-pci: EHCI PCI platform driver
539[ 2.219804] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
540[ 2.219955] ehci-pci 0000:00:02.1: EHCI Host Controller
541[ 2.219976] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
542[ 2.219995] ehci-pci 0000:00:02.1: debug port 1
543[ 2.220040] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
544[ 2.220069] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
545[ 2.231895] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
546[ 2.231976] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
547[ 2.231978] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
548[ 2.231980] usb usb1: Product: EHCI Host Controller
549[ 2.231981] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
550[ 2.231982] usb usb1: SerialNumber: 0000:00:02.1
551[ 2.232219] hub 1-0:1.0: USB hub found
552[ 2.232230] hub 1-0:1.0: 10 ports detected
553[ 2.292605] ohci-pci: OHCI PCI platform driver
554[ 2.297314] ohci-pci 0000:00:02.0: OHCI PCI host controller
555[ 2.302921] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
556[ 2.310370] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
557[ 2.331058] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
558[ 2.341326] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
559[ 2.351060] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
560[ 2.358891] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
561[ 2.365705] tg3 0000:03:00.0: enabling device (0004 -> 0006)
562[ 2.371553] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
563[ 2.373911] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
564[ 2.373913] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
565[ 2.373915] usb usb2: Product: OHCI PCI host controller
566[ 2.373916] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
567[ 2.373917] usb usb2: SerialNumber: 0000:00:02.0
568[ 2.374112] hub 2-0:1.0: USB hub found
569[ 2.374121] hub 2-0:1.0: 10 ports detected
570[ 2.460218] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
571[ 2.470488] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
572[ 2.480227] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
573[ 2.488058] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
574[ 2.501201] FS-Cache: Loaded
575[ 2.508336] RPC: Registered named UNIX socket transport module.
576[ 2.514921] RPC: Registered udp transport module.
577[ 2.521015] RPC: Registered tcp transport module.
578[ 2.527115] RPC: Registered tcp NFSv4.1 backchannel transport module.
579[ 2.539634] FS-Cache: Netfs 'nfs' registered for caching
580[ 2.555286] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
581[ 2.599902] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
582[ 2.691739] tsc: Refined TSC clocksource calibration: 1909.786 MHz
583[ 3.695475] Switched to clocksource tsc
584[ 4.592959] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
585[ 4.599492] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
586[ 4.606386] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
587[ 6.050481] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
588[ 6.064192] systemd[1]: Detected architecture 'x86-64'.
589[ 6.284408] systemd[1]: Inserted module 'autofs4'
590[ 6.290381] systemd[1]: Set hostname to <cb-test-tgt>.
591[ 6.371944] random: nonblocking pool is initialized
592[ 6.527261] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
593[ 6.539994] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
594[ 6.555388] systemd[1]: Expecting device dev-ttyS0.device...
595[ 6.570532] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
596[ 6.578316] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
597[ 6.585920] systemd[1]: Starting Remote File Systems (Pre).
598[ 6.602528] systemd[1]: Reached target Remote File Systems (Pre).
599[ 6.608706] systemd[1]: Starting Encrypted Volumes.
600[ 6.622422] systemd[1]: Reached target Encrypted Volumes.
601[ 6.627888] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
602[ 6.650429] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
603[ 6.659862] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
604[ 6.667918] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
605[ 6.675849] systemd[1]: Starting Paths.
606[ 6.690397] systemd[1]: Reached target Paths.
607[ 6.694796] systemd[1]: Starting Swap.
608[ 6.706404] systemd[1]: Reached target Swap.
609[ 6.710695] systemd[1]: Starting Root Slice.
610[ 6.722399] systemd[1]: Created slice Root Slice.
611[ 6.727130] systemd[1]: Starting User and Session Slice.
612[ 6.742381] systemd[1]: Created slice User and Session Slice.
613[ 6.748155] systemd[1]: Starting Delayed Shutdown Socket.
614[ 6.762366] systemd[1]: Listening on Delayed Shutdown Socket.
615[ 6.768139] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
616[ 6.786396] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
617[ 6.793381] systemd[1]: Starting Journal Socket (/dev/log).
618[ 6.810353] systemd[1]: Listening on Journal Socket (/dev/log).
619[ 6.816314] systemd[1]: Starting udev Kernel Socket.
620[ 6.830347] systemd[1]: Listening on udev Kernel Socket.
621[ 6.835701] systemd[1]: Starting udev Control Socket.
622[ 6.850337] systemd[1]: Listening on udev Control Socket.
623[ 6.855772] systemd[1]: Starting Journal Socket.
624[ 6.870329] systemd[1]: Listening on Journal Socket.
625[ 6.875341] systemd[1]: Starting System Slice.
626[ 6.890321] systemd[1]: Created slice System Slice.
627[ 6.895232] systemd[1]: Starting system-getty.slice.
628[ 6.910315] systemd[1]: Created slice system-getty.slice.
629[ 6.915740] systemd[1]: Starting system-serial\x2dgetty.slice.
630[ 6.930315] systemd[1]: Created slice system-serial\x2dgetty.slice.
631[ 6.936651] systemd[1]: Starting Increase datagram queue length...
632[ 6.955823] systemd[1]: Starting udev Coldplug all Devices...
633[ 7.179651] systemd[1]: Starting Load Kernel Modules...
634[ 7.204582] systemd[1]: Started Set Up Additional Binary Formats.
635[ 7.211055] systemd[1]: Mounting Debug File System...
636[ 7.228074] systemd[1]: Starting Create list of required static device nodes for the current kernel...
637[ 7.251944] systemd[1]: Mounting POSIX Message Queue File System...
638[ 7.271185] systemd[1]: Mounting Huge Pages File System...
639[ 7.287093] systemd[1]: Starting Slices.
640[ 7.298276] systemd[1]: Reached target Slices.
641[ 7.302826] systemd[1]: Starting Remount Root and Kernel File Systems...
642[ 7.334239] systemd[1]: Mounted Huge Pages File System.
643[ 7.350169] systemd[1]: Mounted POSIX Message Queue File System.
644[ 7.366225] systemd[1]: Mounted Debug File System.
645[ 7.382229] systemd[1]: Started Increase datagram queue length.
646[ 7.398192] systemd[1]: Started Load Kernel Modules.
647[ 7.418210] systemd[1]: Started Create list of required static device nodes for the current kernel.
648[ 7.438200] systemd[1]: Started Remount Root and Kernel File Systems.
649[ 7.454202] systemd[1]: Started udev Coldplug all Devices.
650[ 7.499769] systemd[1]: Started Various fixups to make systemd work better on Debian.
651[ 7.507652] systemd[1]: Starting Load/Save Random Seed...
652[ 7.523872] systemd[1]: Starting Create Static Device Nodes in /dev...
653[ 7.543742] systemd[1]: Starting Apply Kernel Variables...
654[ 7.559707] systemd[1]: Mounted Configuration File System.
655[ 7.565266] systemd[1]: Mounted FUSE Control File System.
656[ 7.570682] systemd[1]: Starting Syslog Socket.
657[ 7.586163] systemd[1]: Listening on Syslog Socket.
658[ 7.591244] systemd[1]: Starting Sockets.
659[ 7.606165] systemd[1]: Reached target Sockets.
660[ 7.610763] systemd[1]: Starting Journal Service...
661[ 7.638129] systemd[1]: Started Journal Service.
662[ 7.771406] systemd-udevd[192]: starting version 215
663[ 8.039264] systemd-journald[191]: Received request to flush runtime journal from PID 1
664[ 8.471623] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
665[ 8.480036] ACPI: Power Button [PWRB]
666[ 8.483937] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
667[ 8.491434] ACPI: Power Button [PWRF]
668[ 8.496265] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
669[ 8.504533] EDAC MC: Ver: 3.0.0
670[ 8.508093] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
671[ 8.515974] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
672[ 8.520075] FDC 0 is a post-1991 82077
673[ 8.606338] SCSI subsystem initialized
674[ 8.610442] MCE: In-kernel MCE decoding enabled.
675[ 8.621099] acpi-cpufreq: overriding BIOS provided _PSD data
676[ 8.627125] AMD64 EDAC driver v3.4.0
677[ 8.630842] EDAC amd64: DRAM ECC enabled.
678[ 8.634961] EDAC amd64: F10h detected (node 0).
679[ 8.639540] EDAC MC: DCT0 chip selects:
680[ 8.639542] EDAC amd64: MC: 0: 0MB 1: 0MB
681[ 8.644249] EDAC amd64: MC: 2: 0MB 3: 0MB
682[ 8.648972] EDAC amd64: MC: 4: 0MB 5: 0MB
683[ 8.653677] EDAC amd64: MC: 6: 1024MB 7: 1024MB
684[ 8.658385] EDAC MC: DCT1 chip selects:
685[ 8.658386] EDAC amd64: MC: 0: 0MB 1: 0MB
686[ 8.663129] EDAC amd64: MC: 2: 0MB 3: 0MB
687[ 8.667871] EDAC amd64: MC: 4: 0MB 5: 0MB
688[ 8.672612] EDAC amd64: MC: 6: 1024MB 7: 1024MB
689[ 8.677348] EDAC amd64: using x4 syndromes.
690[ 8.681565] EDAC amd64: MCT channel count: 2
691[ 8.685942] EDAC amd64: CS6: Registered DDR2 RAM
692[ 8.686425] libata version 3.00 loaded.
693[ 8.690613] EDAC amd64: CS7: Registered DDR2 RAM
694[ 8.695687] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
695[ 8.705517] EDAC amd64: DRAM ECC enabled.
696[ 8.709615] EDAC amd64: F10h detected (node 1).
697[ 8.714229] EDAC MC: DCT0 chip selects:
698[ 8.714233] EDAC amd64: MC: 0: 1024MB 1: 0MB
699[ 8.718970] EDAC amd64: MC: 2: 0MB 3: 0MB
700[ 8.723746] EDAC amd64: MC: 4: 0MB 5: 0MB
701[ 8.728482] EDAC amd64: MC: 6: 0MB 7: 0MB
702[ 8.729125] input: PC Speaker as /devices/platform/pcspkr/input/input4
703[ 8.739736] EDAC MC: DCT1 chip selects:
704[ 8.739738] EDAC amd64: MC: 0: 0MB 1: 0MB
705[ 8.744473] EDAC amd64: MC: 2: 0MB 3: 0MB
706[ 8.749209] EDAC amd64: MC: 4: 0MB 5: 0MB
707[ 8.753970] EDAC amd64: MC: 6: 0MB 7: 0MB
708[ 8.758715] EDAC amd64: using x4 syndromes.
709[ 8.762944] EDAC amd64: MCT channel count: 1
710[ 8.767269] EDAC amd64: CS0: Registered DDR2 RAM
711[ 8.772311] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
712[ 8.782249] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
713[ 8.782295] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
714[ 8.782336] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
715[ 8.782414] sata_nv 0000:00:07.0: version 3.5
716[ 8.782720] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
717[ 8.783644] scsi0 : sata_nv
718[ 8.815106] scsi1 : sata_nv
719[ 8.818834] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
720[ 8.826056] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
721[ 8.833709] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
722[ 8.840266] scsi2 : sata_nv
723[ 8.843583] scsi3 : sata_nv
724[ 8.846682] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
725[ 8.853840] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
726[ 8.861070] pata_amd 0000:00:06.0: version 0.4.1
727[ 8.861153] kvm: Nested Virtualization enabled
728[ 8.861970] scsi4 : pata_amd
729[ 8.862281] scsi5 : pata_amd
730[ 8.862470] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
731[ 8.862474] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
732[ 8.885361] kvm: Nested Paging enabled
733[ 9.145513] ata1: SATA link down (SStatus 0 SControl 300)
734[ 9.177514] ata3: SATA link down (SStatus 0 SControl 300)
735[ 9.461433] ata2: SATA link down (SStatus 0 SControl 300)
736[ 9.777322] ata4: SATA link down (SStatus 0 SControl 300)
737[ 39.630401] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****