Gitiles
Code Review Sign In
review.coreboot.org / board-status / b4fd84af3d9e71208d797835950b9fd4215f3b4b / . / asrock / e350m1 / 4.1-127-gacba73a / 2015-07-23T16:30:19Z / kernel_log.txt
blob: 63b10d8d85615605f6c794d4a5e2aaa55c94ebc6 [file] [log] [blame]
Paul Menzel3fddbab2015-07-24 23:38:16 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 4.1.0-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-1) ) #1 SMP Debian 4.1.1-1~exp1 (2015-07-07)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7f9cfff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000c7f9d000-0x00000000dfffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.1-127-gacba73a 07/23/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000 mask F80000000 write-back
26[ 0.000000] 1 base 080000000 mask FC0000000 write-back
27[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 000000021f000000 aka 8688M
34[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
35[ 0.000000] found SMP MP-table at [mem 0x000f6260-0x000f626f] mapped at [c00f6260]
36[ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
37[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
38[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
39[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
40[ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
41[ 0.000000] [mem 0x37600000-0x377fffff] page 2M
42[ 0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
43[ 0.000000] [mem 0x20000000-0x375fffff] page 2M
44[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
45[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
46[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
47[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
48[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
49[ 0.000000] BRK [0x0182b000, 0x0182bfff] PGTABLE
50[ 0.000000] BRK [0x0182c000, 0x0182dfff] PGTABLE
51[ 0.000000] BRK [0x0182e000, 0x0182efff] PGTABLE
52[ 0.000000] BRK [0x0182f000, 0x0182ffff] PGTABLE
53[ 0.000000] RAMDISK: [mem 0x35f7c000-0x36fb5fff]
54[ 0.000000] ACPI: Early table checksum verification disabled
55[ 0.000000] ACPI: RSDP 0x00000000000F6460 000024 (v02 CORE )
56[ 0.000000] ACPI: XSDT 0x00000000C7FB80E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: FACP 0x00000000C7FBA860 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: DSDT 0x00000000C7FB8250 002610 (v02 ASROCK COREBOOT 00010001 INTL 20150619)
59[ 0.000000] ACPI: FACS 0x00000000C7FB8210 000040
60[ 0.000000] ACPI: SSDT 0x00000000C7FBA960 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
61[ 0.000000] ACPI: TCPA 0x00000000C7FBA9B0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: APIC 0x00000000C7FBA9F0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: HEST 0x00000000C7FBAA50 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: SSDT 0x00000000C7FBAA80 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
65[ 0.000000] ACPI: SSDT 0x00000000C7FBC110 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
66[ 0.000000] ACPI: HPET 0x00000000C7FBC4F0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: Local APIC address 0xfee00000
68[ 0.000000] 7798MB HIGHMEM available.
69[ 0.000000] 889MB LOWMEM available.
70[ 0.000000] mapped low ram: 0 - 379fe000
71[ 0.000000] low ram: 0 - 379fe000
72[ 0.000000] Zone ranges:
73[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
74[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
75[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000021effffff]
76[ 0.000000] Movable zone start for each node
77[ 0.000000] Early memory node ranges
78[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
79[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c7f9cfff]
80[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
81[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
82[ 0.000000] On node 0 totalpages: 1994555
83[ 0.000000] free_area_init_node: node 0, pgdat c16debc0, node_mem_map f1320024
84[ 0.000000] DMA zone: 36 pages used for memmap
85[ 0.000000] DMA zone: 0 pages reserved
86[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
87[ 0.000000] Normal zone: 1967 pages used for memmap
88[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
89[ 0.000000] HighMem zone: 1766815 pages, LIFO batch:31
90[ 0.000000] Using APIC driver default
91[ 0.000000] ACPI: PM-Timer IO Port: 0x808
92[ 0.000000] ACPI: Local APIC address 0xfee00000
93[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
94[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
95[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
96[ 0.000000] ACPI: IRQ0 used by override.
97[ 0.000000] ACPI: IRQ9 used by override.
98[ 0.000000] Using ACPI (MADT) for SMP configuration information
99[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
100[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
101[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
102[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
103[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
104[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
105[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
106[ 0.000000] Booting paravirtualized kernel on bare hardware
107[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
108[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
109[ 0.000000] PERCPU: Embedded 19 pages/cpu @f79c6000 s45452 r0 d32372 u77824
110[ 0.000000] pcpu-alloc: s45452 r0 d32372 u77824 alloc=19*4096
111[ 0.000000] pcpu-alloc: [0] 0 [0] 1
112[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1992552
113[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.1.0-trunk-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0 processor.max_cstate=2
114[ 0.000000] PCIe ASPM is forcibly enabled
115[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
116[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
117[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
118[ 0.000000] Initializing CPU#0
119[ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000)
120[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
121[ 0.000000] Memory: 7873944K/7978220K available (5004K kernel code, 625K rwdata, 1488K rodata, 676K init, 468K bss, 104276K reserved, 0K cma-reserved, 7067260K highmem)
122[ 0.000000] virtual kernel memory layout:
123 fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
124 pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
125 vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
126 lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
127 .init : 0xc16f7000 - 0xc17a0000 ( 676 kB)
128 .data : 0xc14e345a - 0xc16f54c0 (2120 kB)
129 .text : 0xc1000000 - 0xc14e345a (5005 kB)
130[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
131[ 0.000000] Hierarchical RCU implementation.
132[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
133[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
134[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
135[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
136[ 0.000000] CPU 0 irqstacks, hard=f742a000 soft=f742c000
137[ 0.000000] spurious 8259A interrupt: IRQ7.
138[ 0.000000] Console: colour VGA+ 80x25
139[ 0.000000] console [tty0] enabled
140[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
141[ 0.000000] hpet clockevent registered
142[ 0.000000] tsc: Fast TSC calibration using PIT
143[ 0.000000] tsc: Detected 1599.955 MHz processor
144[ 0.000058] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.91 BogoMIPS (lpj=6399820)
145[ 0.000065] pid_max: default: 32768 minimum: 301
146[ 0.000084] ACPI: Core revision 20150410
147[ 0.006392] ACPI: All ACPI Tables successfully acquired
148[ 0.006440] Security Framework initialized
149[ 0.006460] AppArmor: AppArmor disabled by boot time parameter
150[ 0.006463] Yama: disabled by default; enable with sysctl kernel.yama.*
151[ 0.006498] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
152[ 0.006504] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
153[ 0.006886] Initializing cgroup subsys blkio
154[ 0.006894] Initializing cgroup subsys memory
155[ 0.006904] Initializing cgroup subsys devices
156[ 0.006910] Initializing cgroup subsys freezer
157[ 0.006918] Initializing cgroup subsys net_cls
158[ 0.006924] Initializing cgroup subsys perf_event
159[ 0.006930] Initializing cgroup subsys net_prio
160[ 0.006970] CPU: Physical Processor ID: 0
161[ 0.006973] CPU: Processor Core ID: 0
162[ 0.006980] mce: CPU supports 6 MCE banks
163[ 0.006999] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
164[ 0.007002] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
165[ 0.007350] Freeing SMP alternatives memory: 24K (c17a0000 - c17a6000)
166[ 0.009758] ftrace: allocating 21713 entries in 43 pages
167[ 0.029580] Enabling APIC mode: Flat. Using 1 I/O APICs
168[ 0.030054] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
169[ 0.176300] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
170[ 0.176363] Performance Events: AMD PMU driver.
171[ 0.176373] ... version: 0
172[ 0.176376] ... bit width: 48
173[ 0.176379] ... generic registers: 4
174[ 0.176382] ... value mask: 0000ffffffffffff
175[ 0.176385] ... max period: 00007fffffffffff
176[ 0.176388] ... fixed-purpose events: 0
177[ 0.176390] ... event mask: 000000000000000f
178[ 0.177661] CPU 1 irqstacks, hard=f752e000 soft=f7530000
179[ 0.177667] x86: Booting SMP configuration:
180[ 0.177671] .... node #0, CPUs: #1
181[ 0.188675] Initializing CPU#1
182[ 0.190878] x86: Booted up 1 node, 2 CPUs
183[ 0.190885] smpboot: Total of 2 processors activated (6399.82 BogoMIPS)
184[ 0.191785] devtmpfs: initialized
185[ 0.192624] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
186[ 0.192857] pinctrl core: initialized pinctrl subsystem
187[ 0.193178] NET: Registered protocol family 16
188[ 0.203217] cpuidle: using governor ladder
189[ 0.212581] cpuidle: using governor menu
190[ 0.212972] ACPI: bus type PCI registered
191[ 0.212977] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
192[ 0.213391] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
193[ 0.213395] bios32_service(0x49435024): not present
194[ 0.213399] PCI: Using configuration type 1 for base access
195[ 0.213401] PCI: Using configuration type 1 for extended access
196[ 0.224666] ACPI: Added _OSI(Module Device)
197[ 0.224675] ACPI: Added _OSI(Processor Device)
198[ 0.224678] ACPI: Added _OSI(3.0 _SCP Extensions)
199[ 0.224682] ACPI: Added _OSI(Processor Aggregator Device)
200[ 0.226948] ACPI: Executed 2 blocks of module-level executable AML code
201[ 0.231399] ACPI: Interpreter enabled
202[ 0.231423] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
203[ 0.231449] ACPI: (supports S0 S1 S3 S4 S5)
204[ 0.231453] ACPI: Using IOAPIC for interrupt routing
205[ 0.231486] HEST: Table parsing has been initialized.
206[ 0.231494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
207[ 0.238303] ACPI: Power Resource [PFN0] (on)
208[ 0.238715] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
209[ 0.238729] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
210[ 0.238881] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
211[ 0.239396] PCI host bridge to bus 0000:00
212[ 0.239403] pci_bus 0000:00: root bus resource [bus 00-ff]
213[ 0.239409] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
214[ 0.239414] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
215[ 0.239419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
216[ 0.239424] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
217[ 0.239440] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
218[ 0.239651] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
219[ 0.239671] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
220[ 0.239683] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
221[ 0.239694] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
222[ 0.239759] pci 0000:00:01.0: supports D1 D2
223[ 0.239847] pci 0000:00:01.0: System wakeup disabled by ACPI
224[ 0.239941] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
225[ 0.239959] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
226[ 0.240035] pci 0000:00:01.1: supports D1 D2
227[ 0.240120] pci 0000:00:01.1: System wakeup disabled by ACPI
228[ 0.240321] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
229[ 0.240347] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
230[ 0.240362] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
231[ 0.240377] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
232[ 0.240391] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
233[ 0.240406] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
234[ 0.240421] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
235[ 0.240694] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
236[ 0.240715] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
237[ 0.240875] pci 0000:00:12.0: System wakeup disabled by ACPI
238[ 0.241041] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
239[ 0.241066] pci 0000:00:12.2: reg 0x10: [mem 0xf014b400-0xf014b4ff]
240[ 0.241172] pci 0000:00:12.2: supports D1 D2
241[ 0.241176] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
242[ 0.241265] pci 0000:00:12.2: System wakeup disabled by ACPI
243[ 0.241419] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
244[ 0.241440] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
245[ 0.241599] pci 0000:00:13.0: System wakeup disabled by ACPI
246[ 0.241762] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
247[ 0.241788] pci 0000:00:13.2: reg 0x10: [mem 0xf014b500-0xf014b5ff]
248[ 0.241893] pci 0000:00:13.2: supports D1 D2
249[ 0.241897] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
250[ 0.241985] pci 0000:00:13.2: System wakeup disabled by ACPI
251[ 0.242152] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
252[ 0.242437] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
253[ 0.242467] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
254[ 0.242556] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
255[ 0.242792] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
256[ 0.243102] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
257[ 0.243235] pci 0000:00:14.4: System wakeup disabled by ACPI
258[ 0.243390] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
259[ 0.243410] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
260[ 0.243572] pci 0000:00:14.5: System wakeup disabled by ACPI
261[ 0.243736] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
262[ 0.243827] pci 0000:00:15.0: supports D1 D2
263[ 0.243920] pci 0000:00:15.0: System wakeup disabled by ACPI
264[ 0.244078] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
265[ 0.244177] pci 0000:00:15.1: supports D1 D2
266[ 0.244267] pci 0000:00:15.1: System wakeup disabled by ACPI
267[ 0.244423] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
268[ 0.244604] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
269[ 0.244779] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
270[ 0.244952] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
271[ 0.245137] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
272[ 0.245308] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
273[ 0.245483] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
274[ 0.245655] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
275[ 0.246090] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
276[ 0.246106] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
277[ 0.246111] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
278[ 0.246116] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
279[ 0.246121] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
280[ 0.246288] pci 0000:00:15.0: PCI bridge to [bus 02]
281[ 0.246411] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
282[ 0.246441] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
283[ 0.246482] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
284[ 0.246509] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
285[ 0.246625] pci 0000:03:00.0: supports D1 D2
286[ 0.246629] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
287[ 0.252575] pci 0000:00:15.1: PCI bridge to [bus 03]
288[ 0.252598] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
289[ 0.252612] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
290[ 0.252655] pci_bus 0000:00: on NUMA node 0
291[ 0.253522] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
292[ 0.253765] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
293[ 0.253940] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
294[ 0.254037] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
295[ 0.254134] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
296[ 0.254230] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
297[ 0.254321] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
298[ 0.254417] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
299[ 0.254772] ACPI: Enabled 6 GPEs in block 00 to 1F
300[ 0.255238] vgaarb: setting as boot device: PCI:0000:00:01.0
301[ 0.255248] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
302[ 0.255260] vgaarb: loaded
303[ 0.255264] vgaarb: bridge control possible 0000:00:01.0
304[ 0.255618] PCI: Using ACPI for IRQ routing
305[ 0.255630] PCI: pci_cache_line_size set to 64 bytes
306[ 0.255793] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
307[ 0.255799] e820: reserve RAM buffer [mem 0xc7f9d000-0xc7ffffff]
308[ 0.255803] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
309[ 0.256264] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
310[ 0.256273] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
311[ 0.258431] Switched to clocksource hpet
312[ 0.272025] pnp: PnP ACPI init
313[ 0.272490] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
314[ 0.272785] pnp: PnP ACPI: found 1 devices
315[ 0.272793] PnPBIOS: Disabled by ACPI PNP
316[ 0.317001] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
317[ 0.317068] pci 0000:00:14.4: PCI bridge to [bus 01]
318[ 0.317090] pci 0000:00:15.0: PCI bridge to [bus 02]
319[ 0.317108] pci 0000:00:15.1: PCI bridge to [bus 03]
320[ 0.317115] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
321[ 0.317127] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
322[ 0.317140] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
323[ 0.317145] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
324[ 0.317149] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
325[ 0.317154] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
326[ 0.317159] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
327[ 0.317164] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
328[ 0.317168] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
329[ 0.317172] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
330[ 0.317177] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
331[ 0.317181] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
332[ 0.317358] NET: Registered protocol family 2
333[ 0.317808] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
334[ 0.317850] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
335[ 0.317901] TCP: Hash tables configured (established 8192 bind 8192)
336[ 0.317951] UDP hash table entries: 512 (order: 2, 16384 bytes)
337[ 0.317966] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
338[ 0.318271] NET: Registered protocol family 1
339[ 0.318308] pci 0000:00:01.0: Video device with shadowed ROM
340[ 0.376823] PCI: CLS 64 bytes, default 64
341[ 0.376957] Unpacking initramfs...
342[ 1.040577] Freeing initrd memory: 16616K (f5f7c000 - f6fb6000)
343[ 1.041296] microcode: CPU0: patch_level=0x05000119
344[ 1.041316] microcode: CPU1: patch_level=0x05000119
345[ 1.041662] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
346[ 1.041683] LVT offset 0 assigned for vector 0x400
347[ 1.041814] perf: AMD IBS detected (0x000000ff)
348[ 1.042889] futex hash table entries: 512 (order: 3, 32768 bytes)
349[ 1.043015] audit: initializing netlink subsys (disabled)
350[ 1.043055] audit: type=2000 audit(1437772498.932:1): initialized
351[ 1.043899] HugeTLB registered 2 MB page size, pre-allocated 0 pages
352[ 1.043940] zpool: loaded
353[ 1.044410] VFS: Disk quotas dquot_6.6.0
354[ 1.044529] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
355[ 1.046008] alg: No test for stdrng (krng)
356[ 1.046062] bounce: pool size: 64 pages
357[ 1.046194] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
358[ 1.046330] io scheduler noop registered
359[ 1.046337] io scheduler deadline registered
360[ 1.046355] io scheduler cfq registered (default)
361[ 1.047724] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
362[ 1.047734] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
363[ 1.047769] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
364[ 1.047773] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
365[ 1.047781] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
366[ 1.047797] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
367[ 1.047836] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
368[ 1.047958] GHES: Failed to enable APEI firmware first mode.
369[ 1.047970] isapnp: ISA Plug & Play support disabled
370[ 1.048238] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
371[ 1.068958] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
372[ 1.070809] Linux agpgart interface v0.103
373[ 1.071639] i8042: PNP: No PS/2 controller found. Probing ports directly.
374[ 1.075496] serio: i8042 KBD port at 0x60,0x64 irq 1
375[ 1.075519] serio: i8042 AUX port at 0x60,0x64 irq 12
376[ 1.076350] mousedev: PS/2 mouse device common for all mice
377[ 1.076557] rtc_cmos 00:00: RTC can wake from S4
378[ 1.077003] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
379[ 1.077121] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
380[ 1.077166] ledtrig-cpu: registered to indicate activity on CPUs
381[ 1.077716] NET: Registered protocol family 10
382[ 1.078328] mip6: Mobile IPv6
383[ 1.078343] NET: Registered protocol family 17
384[ 1.078356] mpls_gso: MPLS GSO support
385[ 1.078940] Using IPI No-Shortcut mode
386[ 1.079602] registered taskstats version 1
387[ 1.080383] rtc_cmos 00:00: setting system clock to 2015-07-24 21:14:59 UTC (1437772499)
388[ 1.080487] PM: Hibernation image not present or could not be loaded.
389[ 1.081103] Freeing unused kernel memory: 676K (c16f7000 - c17a0000)
390[ 1.081349] Write protecting the kernel text: 5008k
391[ 1.081522] Write protecting the kernel read-only data: 1492k
392[ 1.081525] NX-protecting the kernel data: 3184k
393[ 1.176814] systemd-udevd[66]: starting version 215
394[ 1.177602] random: systemd-udevd urandom read with 0 bits of entropy available
395[ 1.197613] ACPI: bus type USB registered
396[ 1.197683] usbcore: registered new interface driver usbfs
397[ 1.197711] usbcore: registered new interface driver hub
398[ 1.205407] SCSI subsystem initialized
399[ 1.205576] usbcore: registered new device driver usb
400[ 1.207233] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
401[ 1.208009] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
402[ 1.208434] ehci-pci: EHCI PCI platform driver
403[ 1.208854] QUIRK: Enable AMD PLL fix
404[ 1.208899] ehci-pci 0000:00:12.2: EHCI Host Controller
405[ 1.208913] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
406[ 1.208925] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
407[ 1.209008] ehci-pci 0000:00:12.2: debug port 1
408[ 1.209081] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014b400
409[ 1.213555] libata version 3.00 loaded.
410[ 1.218645] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
411[ 1.218813] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
412[ 1.218818] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
413[ 1.218823] usb usb1: Product: EHCI Host Controller
414[ 1.218827] usb usb1: Manufacturer: Linux 4.1.0-trunk-686-pae ehci_hcd
415[ 1.218831] usb usb1: SerialNumber: 0000:00:12.2
416[ 1.219149] hub 1-0:1.0: USB hub found
417[ 1.219479] hub 1-0:1.0: 5 ports detected
418[ 1.220414] ehci-pci 0000:00:13.2: EHCI Host Controller
419[ 1.220429] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
420[ 1.220439] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
421[ 1.220524] ehci-pci 0000:00:13.2: debug port 1
422[ 1.220578] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014b500
423[ 1.230489] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
424[ 1.230615] thermal LNXTHERM:00: registered as thermal_zone0
425[ 1.230624] ACPI: Thermal Zone [TZ00] (40 C)
426[ 1.230661] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
427[ 1.230666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
428[ 1.230673] usb usb2: Product: EHCI Host Controller
429[ 1.230681] usb usb2: Manufacturer: Linux 4.1.0-trunk-686-pae ehci_hcd
430[ 1.230688] usb usb2: SerialNumber: 0000:00:13.2
431[ 1.231789] hub 2-0:1.0: USB hub found
432[ 1.231816] hub 2-0:1.0: 5 ports detected
433[ 1.232793] ohci-pci: OHCI PCI platform driver
434[ 1.233226] ohci-pci 0000:00:12.0: OHCI PCI host controller
435[ 1.233241] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
436[ 1.233307] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
437[ 1.236977] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
438[ 1.237823] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8228000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26
439[ 1.237828] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
440[ 1.291056] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
441[ 1.291067] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
442[ 1.291072] usb usb3: Product: OHCI PCI host controller
443[ 1.291076] usb usb3: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
444[ 1.291080] usb usb3: SerialNumber: 0000:00:12.0
445[ 1.291714] hub 3-0:1.0: USB hub found
446[ 1.291740] hub 3-0:1.0: 5 ports detected
447[ 1.292423] ohci-pci 0000:00:13.0: OHCI PCI host controller
448[ 1.292436] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
449[ 1.292491] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
450[ 1.350972] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
451[ 1.350983] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
452[ 1.350988] usb usb4: Product: OHCI PCI host controller
453[ 1.350993] usb usb4: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
454[ 1.350997] usb usb4: SerialNumber: 0000:00:13.0
455[ 1.351638] hub 4-0:1.0: USB hub found
456[ 1.351664] hub 4-0:1.0: 5 ports detected
457[ 1.352347] ohci-pci 0000:00:14.5: OHCI PCI host controller
458[ 1.352361] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
459[ 1.352410] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
460[ 1.410896] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
461[ 1.410906] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
462[ 1.410911] usb usb5: Product: OHCI PCI host controller
463[ 1.410915] usb usb5: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
464[ 1.410919] usb usb5: SerialNumber: 0000:00:14.5
465[ 1.411590] hub 5-0:1.0: USB hub found
466[ 1.411616] hub 5-0:1.0: 2 ports detected
467[ 1.411899] ahci 0000:00:11.0: version 3.0
468[ 1.412545] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
469[ 1.412552] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
470[ 1.415945] scsi host0: ahci
471[ 1.416249] scsi host1: ahci
472[ 1.416449] scsi host2: ahci
473[ 1.416707] scsi host3: ahci
474[ 1.416911] scsi host4: ahci
475[ 1.417137] scsi host5: ahci
476[ 1.417340] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
477[ 1.417346] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
478[ 1.417351] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
479[ 1.417357] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
480[ 1.417361] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
481[ 1.417366] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
482[ 1.542779] usb 2-1: new high-speed USB device number 2 using ehci-pci
483[ 1.692401] usb 2-1: New USB device found, idVendor=148f, idProduct=2870
484[ 1.692418] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
485[ 1.692427] usb 2-1: Product: 802.11 n WLAN
486[ 1.692434] usb 2-1: Manufacturer: Ralink
487[ 1.734765] ata5: SATA link down (SStatus 0 SControl 300)
488[ 1.734820] ata6: SATA link down (SStatus 0 SControl 300)
489[ 1.734885] ata2: SATA link down (SStatus 0 SControl 300)
490[ 1.734916] ata4: SATA link down (SStatus 0 SControl 300)
491[ 1.734946] usb 3-1: new low-speed USB device number 2 using ohci-pci
492[ 1.734956] ata1: SATA link down (SStatus 0 SControl 300)
493[ 1.900976] usb 3-1: New USB device found, idVendor=1241, idProduct=1122
494[ 1.900993] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
495[ 1.905426] hidraw: raw HID events driver (C) Jiri Kosina
496[ 1.906691] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
497[ 1.907366] ata3.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
498[ 1.907376] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
499[ 1.907895] ata3.00: configured for UDMA/100
500[ 1.908486] scsi 2:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
501[ 1.914236] usbcore: registered new interface driver usbhid
502[ 1.914244] usbhid: USB HID core driver
503[ 1.915553] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
504[ 1.915817] sd 2:0:0:0: [sda] Write Protect is off
505[ 1.915830] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
506[ 1.915879] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
507[ 1.916756] sda: sda1 sda2
508[ 1.917032] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:1241:1122.0001/input/input2
509[ 1.917669] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-1/input0
510[ 1.917740] sd 2:0:0:0: [sda] Attached SCSI disk
511[ 1.919477] sd 2:0:0:0: Attached scsi generic sg0 type 0
512[ 1.978664] device-mapper: uevent: version 1.0.3
513[ 1.978825] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
514[ 2.038833] tsc: Refined TSC clocksource calibration: 1600.000 MHz
515[ 2.038846] usb 3-2: new low-speed USB device number 3 using ohci-pci
516[ 2.038856] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
517[ 2.210943] usb 3-2: New USB device found, idVendor=046d, idProduct=c312
518[ 2.210960] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
519[ 2.210969] usb 3-2: Product: USB Multimedia Keyboard
520[ 2.210977] usb 3-2: Manufacturer: LITEON Technology
521[ 2.219781] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:046D:C312.0002/input/input3
522[ 2.275168] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-2/input0
523[ 3.039149] Switched to clocksource tsc
524[ 8.136141] NET: Registered protocol family 38
525[ 8.495097] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
526[ 9.184439] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
527[ 9.184580] systemd[1]: Found ordering cycle on basic.target/start
528[ 9.184588] systemd[1]: Found dependency on sysinit.target/start
529[ 9.184596] systemd[1]: Found dependency on rpcbind.service/start
530[ 9.184604] systemd[1]: Found dependency on network-online.target/start
531[ 9.184610] systemd[1]: Found dependency on network.target/start
532[ 9.184617] systemd[1]: Found dependency on systemd-networkd.service/start
533[ 9.184623] systemd[1]: Found dependency on dbus.service/start
534[ 9.184628] systemd[1]: Found dependency on basic.target/start
535[ 9.184635] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
536[ 9.184643] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
537[ 9.345690] random: nonblocking pool is initialized
538[ 10.352131] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
539[ 10.494837] lp: driver loaded but no devices found
540[ 10.519420] ppdev: user-space parallel port driver
541[ 10.522425] parport0: PC-style at 0x378 [PCSPP,EPP]
542[ 10.522545] parport0: irq 0 detected
543[ 10.575338] systemd-udevd[248]: starting version 215
544[ 10.622829] lp0: using parport0 (polling).
545[ 10.639296] fuse init (API version 7.23)
546[ 10.656402] w83627ehf: Found NCT6775F chip at 0x290
547[ 10.865364] ACPI: processor limited to max C-state 2
548[ 10.865405] ACPI: acpi_idle registered with cpuidle
549[ 10.869378] acpi-cpufreq: overriding BIOS provided _PSD data
550[ 10.911057] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
551[ 10.911071] ACPI: Power Button [PWRB]
552[ 10.911182] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
553[ 10.911187] ACPI: Power Button [PWRF]
554[ 10.913595] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0B (\SMB0) (20150410/utaddress-254)
555[ 10.913663] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
556[ 10.924843] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
557[ 10.924979] sp5100_tco: PCI Revision ID: 0x42
558[ 10.925095] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
559[ 10.925109] sp5100_tco: Last reboot was not triggered by watchdog.
560[ 10.927851] sp5100_tco: initialized (0xf82a6b00). heartbeat=60 sec (nowayout=0)
561[ 10.961314] [drm] Initialized drm 1.1.0 20060810
562[ 11.047442] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
563[ 11.103153] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
564[ 11.111613] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
565[ 11.112336] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
566[ 11.112342] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
567[ 11.112348] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
568[ 11.112352] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
569[ 11.112357] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
570[ 11.112360] snd_hda_codec_realtek hdaudioC1D0: inputs:
571[ 11.112366] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
572[ 11.112371] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
573[ 11.112375] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
574[ 11.112380] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
575[ 11.175511] [drm] radeon kernel modesetting enabled.
576[ 11.181200] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
577[ 11.181808] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
578[ 11.181888] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
579[ 11.181967] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
580[ 11.182044] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
581[ 11.182123] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
582[ 11.182203] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
583[ 11.182280] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
584[ 11.182361] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
585[ 11.216391] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
586[ 11.216433] [drm] register mmio base: 0xF0100000
587[ 11.216436] [drm] register mmio size: 262144
588[ 11.216540] ATOM BIOS: AMD
589[ 11.216629] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
590[ 11.216635] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
591[ 11.216640] [drm] Detected VRAM RAM=384M, BAR=256M
592[ 11.216643] [drm] RAM width 32bits DDR
593[ 11.232334] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
594[ 11.233817] [TTM] Zone kernel: Available graphics memory: 412000 kiB
595[ 11.233824] [TTM] Zone highmem: Available graphics memory: 3945630 kiB
596[ 11.233827] [TTM] Initializing pool allocator
597[ 11.233840] [TTM] Initializing DMA pool allocator
598[ 11.233895] [drm] radeon: 384M of VRAM memory ready
599[ 11.233899] [drm] radeon: 1024M of GTT memory ready.
600[ 11.233923] [drm] Loading PALM Microcode
601[ 11.346293] systemd[1]: Found dependency on rpcbind.service/start
602[ 11.347981] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
603[ 11.354784] systemd[1]: Found dependency on network-online.target/start
604[ 11.362740] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
605[ 11.371778] systemd[1]: Found dependency on network.target/start
606[ 11.386470] systemd[1]: Found dependency on systemd-networkd.service/start
607[ 11.408848] kvm: Nested Virtualization enabled
608[ 11.408860] kvm: Nested Paging enabled
609[ 11.410830] r8169 0000:03:00.0 eth10: renamed from eth0
610[ 11.411429] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
611[ 11.411449] [drm] Internal thermal controller without fan control
612[ 11.411554] [drm] Found smc ucode version: 0x00010601
613[ 11.411649] [drm] radeon: dpm initialized
614[ 11.422845] systemd-udevd[276]: renamed network interface eth0 to eth10
615[ 11.435904] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
616[ 11.436014] [drm] GART: num cpu pages 262144, num gpu pages 262144
617[ 11.499814] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
618[ 11.508974] radeon 0000:00:01.0: WB enabled
619[ 11.508989] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffac3c00
620[ 11.508995] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffac3c0c
621[ 11.510897] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8a32118
622[ 11.512132] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
623[ 11.512137] [drm] Driver supports precise vblank timestamp query.
624[ 11.512143] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
625[ 11.514019] radeon 0000:00:01.0: radeon: using MSI.
626[ 11.520110] [drm] radeon: irq initialized.
627[ 11.563054] [drm] ring test on 0 succeeded in 1 usecs
628[ 11.563143] [drm] ring test on 3 succeeded in 3 usecs
629[ 11.630564] [drm] ring test on 5 succeeded in 1 usecs
630[ 11.650572] [drm] UVD initialized successfully.
631[ 11.651420] [drm] ib test on ring 0 succeeded in 0 usecs
632[ 11.651465] [drm] ib test on ring 3 succeeded in 0 usecs
633[ 11.677944] cfg80211: Calling CRDA to update world regulatory domain
634[ 11.819526] cfg80211: World regulatory domain updated:
635[ 11.819539] cfg80211: DFS Master region: unset
636[ 11.819543] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
637[ 11.819548] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
638[ 11.819553] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
639[ 11.819557] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
640[ 11.819562] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
641[ 11.819567] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
642[ 11.819571] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
643[ 11.819575] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
644[ 11.819579] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
645[ 11.842530] usb 2-1: reset high-speed USB device number 2 using ehci-pci
646[ 11.989618] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
647[ 12.003961] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
648[ 12.044197] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
649[ 12.060441] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
650[ 12.061107] usbcore: registered new interface driver rt2800usb
651[ 12.066034] systemd-journald[239]: Received request to flush runtime journal from PID 1
652[ 12.098316] rt2800usb 2-1:1.0 wlan1: renamed from wlan0
653[ 12.102864] systemd-udevd[276]: renamed network interface wlan0 to wlan1
654[ 12.170504] [drm] ib test on ring 5 succeeded
655[ 12.203529] [drm] Radeon Display Connectors
656[ 12.203539] [drm] Connector 0:
657[ 12.203542] [drm] HDMI-A-1
658[ 12.203545] [drm] HPD1
659[ 12.203550] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
660[ 12.203552] [drm] Encoders:
661[ 12.203555] [drm] DFP1: INTERNAL_UNIPHY
662[ 12.203558] [drm] Connector 1:
663[ 12.203560] [drm] HDMI-A-2
664[ 12.203563] [drm] HPD2
665[ 12.203567] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
666[ 12.203569] [drm] Encoders:
667[ 12.203571] [drm] DFP2: INTERNAL_UNIPHY
668[ 12.203574] [drm] Connector 2:
669[ 12.203576] [drm] VGA-1
670[ 12.203579] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
671[ 12.203582] [drm] Encoders:
672[ 12.203584] [drm] CRT1: INTERNAL_KLDSCP_DAC1
673[ 12.247827] [drm] fb mappable at 0xE0478000
674[ 12.247838] [drm] vram apper at 0xE0000000
675[ 12.247841] [drm] size 5242880
676[ 12.247844] [drm] fb depth is 24
677[ 12.247847] [drm] pitch is 5120
678[ 12.248863] fbcon: radeondrmfb (fb0) is primary device
679[ 12.292081] Console: switching to colour frame buffer device 160x64
680[ 12.303138] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
681[ 12.303141] radeon 0000:00:01.0: registered panic notifier
682[ 12.314626] [drm] Initialized radeon 2.42.0 20080528 for 0000:00:01.0 on minor 0
683[ 12.863831] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
684[ 12.864750] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
685[ 12.864774] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
686[ 13.082652] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
687[ 13.680169] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
688[ 13.864275] r8169 0000:03:00.0 eth10: link down
689[ 13.864886] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
690[ 62.046937] wlan1: authenticate with 34:31:c4:bd:c8:97
691[ 62.095030] wlan1: send auth to 34:31:c4:bd:c8:97 (try 1/3)
692[ 62.104299] wlan1: authenticated
693[ 62.106884] wlan1: associate with 34:31:c4:bd:c8:97 (try 1/3)
694[ 62.137981] wlan1: RX AssocResp from 34:31:c4:bd:c8:97 (capab=0x431 status=0 aid=4)
695[ 62.148638] wlan1: associated
696[ 62.148682] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
697[ 62.149073] cfg80211: Calling CRDA for country: DE
698[ 62.161393] cfg80211: Regulatory domain changed to country: DE
699[ 62.161408] cfg80211: DFS Master region: ETSI
700[ 62.161413] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
701[ 62.161420] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
702[ 62.161427] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
703[ 62.161433] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
704[ 62.161439] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
705[ 62.161444] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
706[ 1177.025567] ieee80211 phy0: rt2800usb_txdone: Warning - Data pending for entry 1 in queue 2