Gitiles
Code Review Sign In
review.coreboot.org / board-status / b4e166a7dbd87725e3fda4ffe093fffa8a59e824 / . / lenovo / x230 / 4.0-6522-ge0ceac3 / 2014-07-28T23:24:28Z / kernel_log.txt
blob: 50e89725da31e63eb0df43cacc931e71ca9d42a4 [file] [log] [blame]
Vladimir Serbinenko7c89da32014-07-29 01:41:57 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-5) ) #1 SMP Debian 3.14.13-1 (2014-07-21)
5[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
8[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
9[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
11[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
13[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfecffff] usable
15[ 0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfffffff] type 16
16[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: LENOVO 2325TLU/2325TLU, BIOS CBET4000 4.0-6522-ge0ceac3 07/29/2014
22[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24[ 0.000000] No AGP bridge found
25[ 0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: write-back
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-FFFFF write-back
31[ 0.000000] MTRR variable ranges enabled:
32[ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable
33[ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
34[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
35[ 0.000000] 3 disabled
36[ 0.000000] 4 disabled
37[ 0.000000] 5 disabled
38[ 0.000000] 6 disabled
39[ 0.000000] 7 disabled
40[ 0.000000] 8 disabled
41[ 0.000000] 9 disabled
42[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
43[ 0.000000] e820: last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
44[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
45[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
46[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
47[ 0.000000] BRK [0x01aad000, 0x01aadfff] PGTABLE
48[ 0.000000] BRK [0x01aae000, 0x01aaefff] PGTABLE
49[ 0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE
50[ 0.000000] init_memory_mapping: [mem 0x43b400000-0x43b5fffff]
51[ 0.000000] [mem 0x43b400000-0x43b5fffff] page 2M
52[ 0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE
53[ 0.000000] init_memory_mapping: [mem 0x438000000-0x43b3fffff]
54[ 0.000000] [mem 0x438000000-0x43b3fffff] page 2M
55[ 0.000000] init_memory_mapping: [mem 0x400000000-0x437ffffff]
56[ 0.000000] [mem 0x400000000-0x437ffffff] page 2M
57[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
58[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
59[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
60[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
61[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
62[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfecffff]
63[ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M
64[ 0.000000] [mem 0xbfe00000-0xbfecffff] page 4k
65[ 0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE
66[ 0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE
67[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
68[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
69[ 0.000000] RAMDISK: [mem 0x35f4e000-0x36f9efff]
70[ 0.000000] ACPI: RSDP 00000000000f0000 000024 (v02 CORE )
71[ 0.000000] ACPI: XSDT 00000000bfee12e0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: FACP 00000000bfee4a20 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
73[ 0.000000] ACPI: DSDT 00000000bfee1450 0035CF (v02 COREv4 COREBOOT 20110725 INTL 20140424)
74[ 0.000000] ACPI: FACS 00000000bfee1410 000040
75[ 0.000000] ACPI: HPET 00000000bfee4b20 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
76[ 0.000000] ACPI: APIC 00000000bfee4b60 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
77[ 0.000000] ACPI: MCFG 00000000bfee4bd0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
78[ 0.000000] ACPI: SSDT 00000000bfee5c10 00122C (v02 CORE COREBOOT 0000002A CORE 0000002A)
79[ 0.000000] ACPI: Local APIC address 0xfee00000
80[ 0.000000] No NUMA configuration found
81[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff]
82[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43b5fffff]
83[ 0.000000] NODE_DATA [mem 0x43b5ee000-0x43b5f2fff]
84[ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042ac00000-ffff880438bfffff] on node 0
85[ 0.000000] Zone ranges:
86[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
87[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
88[ 0.000000] Normal [mem 0x100000000-0x43b5fffff]
89[ 0.000000] Movable zone start for each node
90[ 0.000000] Early memory node ranges
91[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
92[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
93[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
94[ 0.000000] node 0: [mem 0x40200000-0xbfecffff]
95[ 0.000000] node 0: [mem 0x100000000-0x43b5fffff]
96[ 0.000000] On node 0 totalpages: 4173935
97[ 0.000000] DMA zone: 56 pages used for memmap
98[ 0.000000] DMA zone: 22 pages reserved
99[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
100[ 0.000000] DMA32 zone: 10678 pages used for memmap
101[ 0.000000] DMA32 zone: 781008 pages, LIFO batch:31
102[ 0.000000] Normal zone: 46333 pages used for memmap
103[ 0.000000] Normal zone: 3388928 pages, LIFO batch:31
104[ 0.000000] ACPI: PM-Timer IO Port: 0x508
105[ 0.000000] ACPI: Local APIC address 0xfee00000
106[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
107[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
108[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
109[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
110[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
111[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
112[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
113[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
114[ 0.000000] ACPI: IRQ0 used by override.
115[ 0.000000] ACPI: IRQ2 used by override.
116[ 0.000000] ACPI: IRQ9 used by override.
117[ 0.000000] Using ACPI (MADT) for SMP configuration information
118[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
119[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
120[ 0.000000] nr_irqs_gsi: 40
121[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
122[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
124[ 0.000000] PM: Registered nosave memory: [mem 0xbfed0000-0xbfffffff]
125[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
127[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
129[ 0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices
130[ 0.000000] Booting paravirtualized kernel on bare hardware
131[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
132[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043b200000 s86080 r8192 d24512 u524288
133[ 0.000000] pcpu-alloc: s86080 r8192 d24512 u524288 alloc=1*2097152
134[ 0.000000] pcpu-alloc: [0] 0 1 2 3
135[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116846
136[ 0.000000] Policy zone: Normal
137[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
138[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
139[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
140[ 0.000000] Checking aperture...
141[ 0.000000] No AGP bridge found
142[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
143[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
144[ 0.000000] Memory: 16371768K/16695740K available (4955K kernel code, 739K rwdata, 1724K rodata, 1008K init, 960K bss, 323972K reserved)
145[ 0.000000] Hierarchical RCU implementation.
146[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
147[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
148[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
149[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
150[ 0.000000] Console: colour VGA+ 80x25
151[ 0.000000] console [tty0] enabled
152[ 0.000000] hpet clockevent registered
153[ 0.000000] tsc: Fast TSC calibration using PIT
154[ 0.000000] tsc: Detected 2793.525 MHz processor
155[ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.05 BogoMIPS (lpj=11174100)
156[ 0.000029] pid_max: default: 32768 minimum: 301
157[ 0.000035] ACPI: Core revision 20131218
158[ 0.001663] ACPI: All ACPI Tables successfully acquired
159[ 0.001775] Security Framework initialized
160[ 0.001782] AppArmor: AppArmor disabled by boot time parameter
161[ 0.001782] Yama: disabled by default; enable with sysctl kernel.yama.*
162[ 0.002509] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
163[ 0.006010] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
164[ 0.007594] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
165[ 0.007608] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
166[ 0.007790] Initializing cgroup subsys memory
167[ 0.007794] Initializing cgroup subsys devices
168[ 0.007795] Initializing cgroup subsys freezer
169[ 0.007796] Initializing cgroup subsys net_cls
170[ 0.007798] Initializing cgroup subsys blkio
171[ 0.007799] Initializing cgroup subsys perf_event
172[ 0.007819] CPU: Physical Processor ID: 0
173[ 0.007819] CPU: Processor Core ID: 0
174[ 0.008139] mce: CPU supports 7 MCE banks
175[ 0.008150] CPU0: Thermal monitoring enabled (TM1)
176[ 0.008158] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
177[ 0.008158] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
178[ 0.008158] tlb_flushall_shift: 2
179[ 0.008248] Freeing SMP alternatives memory: 20K (ffffffff819b6000 - ffffffff819bb000)
180[ 0.009756] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
181[ 0.049488] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
182[ 0.049494] TSC deadline timer enabled
183[ 0.049501] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
184[ 0.049506] ... version: 3
185[ 0.049507] ... bit width: 48
186[ 0.049507] ... generic registers: 4
187[ 0.049508] ... value mask: 0000ffffffffffff
188[ 0.049509] ... max period: 0000ffffffffffff
189[ 0.049510] ... fixed-purpose events: 3
190[ 0.049510] ... event mask: 000000070000000f
191[ 0.049916] x86: Booting SMP configuration:
192[ 0.049918] .... node #0, CPUs: #1
193[ 0.063325] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
194[ 0.063404] #2 #3
195[ 0.090405] x86: Booted up 1 node, 4 CPUs
196[ 0.090408] smpboot: Total of 4 processors activated (22348.20 BogoMIPS)
197[ 0.093181] devtmpfs: initialized
198[ 0.096448] pinctrl core: initialized pinctrl subsystem
199[ 0.096494] NET: Registered protocol family 16
200[ 0.096565] cpuidle: using governor ladder
201[ 0.096566] cpuidle: using governor menu
202[ 0.096588] ACPI: bus type PCI registered
203[ 0.096589] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
204[ 0.096653] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
205[ 0.096655] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
206[ 0.096727] PCI: Using configuration type 1 for base access
207[ 0.097480] bio: create slab <bio-0> at 0
208[ 0.097570] ACPI: Added _OSI(Module Device)
209[ 0.097571] ACPI: Added _OSI(Processor Device)
210[ 0.097572] ACPI: Added _OSI(3.0 _SCP Extensions)
211[ 0.097573] ACPI: Added _OSI(Processor Aggregator Device)
212[ 0.099771] ACPI: Interpreter enabled
213[ 0.099775] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
214[ 0.099778] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
215[ 0.099787] ACPI: (supports S0 S3 S4 S5)
216[ 0.099788] ACPI: Using IOAPIC for interrupt routing
217[ 0.099807] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
218[ 0.099887] ACPI: No dock devices found.
219[ 0.103633] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
220[ 0.103637] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
221[ 0.103674] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
222[ 0.103748] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
223[ 0.103870] PCI host bridge to bus 0000:00
224[ 0.103872] pci_bus 0000:00: root bus resource [bus 00-ff]
225[ 0.103874] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
226[ 0.103875] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
227[ 0.103877] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
228[ 0.103878] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
229[ 0.103879] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
230[ 0.103880] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
231[ 0.103882] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
232[ 0.103883] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
233[ 0.103884] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
234[ 0.103885] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
235[ 0.103886] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
236[ 0.103888] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
237[ 0.103889] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
238[ 0.103890] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
239[ 0.103891] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
240[ 0.103892] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
241[ 0.103894] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xfebfffff]
242[ 0.103895] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
243[ 0.103901] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
244[ 0.103968] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
245[ 0.103978] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
246[ 0.103984] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
247[ 0.103988] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
248[ 0.104069] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
249[ 0.104090] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
250[ 0.104158] pci 0000:00:14.0: PME# supported from D3hot D3cold
251[ 0.104186] pci 0000:00:14.0: System wakeup disabled by ACPI
252[ 0.104223] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
253[ 0.104244] pci 0000:00:16.0: reg 0x10: [mem 0xe0636100-0xe063610f 64bit]
254[ 0.104317] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
255[ 0.104382] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
256[ 0.104399] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
257[ 0.104407] pci 0000:00:19.0: reg 0x14: [mem 0xe0634000-0xe0634fff]
258[ 0.104416] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
259[ 0.104476] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
260[ 0.104536] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
261[ 0.104556] pci 0000:00:1a.0: reg 0x10: [mem 0xe0635800-0xe0635bff]
262[ 0.104641] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
263[ 0.104670] pci 0000:00:1a.0: System wakeup disabled by ACPI
264[ 0.104705] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
265[ 0.104719] pci 0000:00:1b.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
266[ 0.104789] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
267[ 0.104818] pci 0000:00:1b.0: System wakeup disabled by ACPI
268[ 0.104854] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
269[ 0.104986] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
270[ 0.105065] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
271[ 0.105195] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
272[ 0.105271] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
273[ 0.105393] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
274[ 0.105472] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
275[ 0.105492] pci 0000:00:1d.0: reg 0x10: [mem 0xe0635c00-0xe0635fff]
276[ 0.105577] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
277[ 0.105606] pci 0000:00:1d.0: System wakeup disabled by ACPI
278[ 0.105641] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
279[ 0.105794] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
280[ 0.105813] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887]
281[ 0.105820] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893]
282[ 0.105827] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f]
283[ 0.105836] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897]
284[ 0.105844] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f]
285[ 0.105852] pci 0000:00:1f.2: reg 0x24: [mem 0xe0635000-0xe06357ff]
286[ 0.105899] pci 0000:00:1f.2: PME# supported from D3hot
287[ 0.105953] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
288[ 0.105967] pci 0000:00:1f.3: reg 0x10: [mem 0xe0636000-0xe06360ff 64bit]
289[ 0.105987] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
290[ 0.106165] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
291[ 0.106190] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
292[ 0.106207] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
293[ 0.106209] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller
294[ 0.106242] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff]
295[ 0.106544] pci 0000:01:00.0: supports D1 D2
296[ 0.106545] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
297[ 0.106664] pci 0000:01:00.1: [1180:e232] type 00 class 0x088000
298[ 0.106699] pci 0000:01:00.1: reg 0x10: [mem 0xe0400100-0xe04001ff]
299[ 0.106983] pci 0000:01:00.1: supports D1 D2
300[ 0.106984] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
301[ 0.117089] pci 0000:00:1c.0: PCI bridge to [bus 01]
302[ 0.117101] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
303[ 0.117353] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
304[ 0.117502] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit]
305[ 0.118262] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
306[ 0.129200] pci 0000:00:1c.1: PCI bridge to [bus 02]
307[ 0.129209] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
308[ 0.129298] pci 0000:00:1c.2: PCI bridge to [bus 03]
309[ 0.129426] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
310[ 0.129463] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
311[ 0.129498] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
312[ 0.129532] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
313[ 0.129566] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
314[ 0.129599] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
315[ 0.129634] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
316[ 0.129668] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
317[ 0.129906] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
318[ 0.129971] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
319[ 0.129973] vgaarb: loaded
320[ 0.129974] vgaarb: bridge control possible 0000:00:02.0
321[ 0.130005] PCI: Using ACPI for IRQ routing
322[ 0.131475] PCI: pci_cache_line_size set to 64 bytes
323[ 0.131590] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
324[ 0.131591] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff]
325[ 0.131681] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
326[ 0.131685] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
327[ 0.133708] Switched to clocksource hpet
328[ 0.135160] pnp: PnP ACPI init
329[ 0.135172] ACPI: bus type PNP registered
330[ 0.135226] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
331[ 0.135228] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
332[ 0.135229] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
333[ 0.135231] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
334[ 0.135232] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
335[ 0.135234] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
336[ 0.135235] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
337[ 0.135237] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
338[ 0.135238] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
339[ 0.135239] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
340[ 0.135241] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
341[ 0.135594] pnp 00:01: [dma 4]
342[ 0.135616] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
343[ 0.135636] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
344[ 0.135708] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
345[ 0.135709] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
346[ 0.135739] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
347[ 0.135769] system 00:05: [io 0x0500-0x057f] could not be reserved
348[ 0.135770] system 00:05: [io 0x0480-0x04bf] has been reserved
349[ 0.135772] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
350[ 0.135792] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
351[ 0.135822] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
352[ 0.135848] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
353[ 0.135858] pnp: PnP ACPI: found 9 devices
354[ 0.135859] ACPI: bus type PNP unregistered
355[ 0.141914] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
356[ 0.141916] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
357[ 0.141918] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
358[ 0.141922] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
359[ 0.141923] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
360[ 0.141925] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
361[ 0.141931] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc2a00000-0xc2bfffff]
362[ 0.141938] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc2c00000-0xc2dfffff 64bit pref]
363[ 0.141940] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
364[ 0.141942] pci 0000:00:1c.0: PCI bridge to [bus 01]
365[ 0.141949] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
366[ 0.141960] pci 0000:00:1c.1: PCI bridge to [bus 02]
367[ 0.141967] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
368[ 0.141978] pci 0000:00:1c.2: PCI bridge to [bus 03]
369[ 0.141981] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
370[ 0.141988] pci 0000:00:1c.2: bridge window [mem 0xc2a00000-0xc2bfffff]
371[ 0.141992] pci 0000:00:1c.2: bridge window [mem 0xc2c00000-0xc2dfffff 64bit pref]
372[ 0.142001] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
373[ 0.142002] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
374[ 0.142003] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
375[ 0.142005] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
376[ 0.142006] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
377[ 0.142007] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
378[ 0.142008] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
379[ 0.142010] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
380[ 0.142011] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
381[ 0.142012] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
382[ 0.142013] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
383[ 0.142014] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
384[ 0.142016] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
385[ 0.142017] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
386[ 0.142018] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
387[ 0.142019] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
388[ 0.142021] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xfebfffff]
389[ 0.142022] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
390[ 0.142023] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
391[ 0.142025] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
392[ 0.142026] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
393[ 0.142027] pci_bus 0000:03: resource 1 [mem 0xc2a00000-0xc2bfffff]
394[ 0.142029] pci_bus 0000:03: resource 2 [mem 0xc2c00000-0xc2dfffff 64bit pref]
395[ 0.142078] NET: Registered protocol family 2
396[ 0.142255] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
397[ 0.142451] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
398[ 0.142555] TCP: Hash tables configured (established 131072 bind 65536)
399[ 0.142572] TCP: reno registered
400[ 0.142586] UDP hash table entries: 8192 (order: 6, 262144 bytes)
401[ 0.142630] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
402[ 0.142721] NET: Registered protocol family 1
403[ 0.142731] pci 0000:00:02.0: Boot video device
404[ 0.142791] pci 0000:00:14.0: can't derive routing for PCI INT A
405[ 0.142792] pci 0000:00:14.0: PCI INT A: no GSI
406[ 0.142864] pci 0000:00:14.0: can't derive routing for PCI INT A
407[ 0.143110] PCI: CLS 64 bytes, default 64
408[ 0.143147] Unpacking initramfs...
409[ 0.386621] Freeing initrd memory: 16708K (ffff880035f4e000 - ffff880036f9f000)
410[ 0.386626] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
411[ 0.386628] software IO TLB [mem 0xbbed0000-0xbfed0000] (64MB) mapped at [ffff8800bbed0000-ffff8800bfecffff]
412[ 0.386804] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
413[ 0.386839] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
414[ 0.386845] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
415[ 0.386853] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
416[ 0.386860] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
417[ 0.386914] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
418[ 0.387121] futex hash table entries: 1024 (order: 4, 65536 bytes)
419[ 0.387165] audit: initializing netlink subsys (disabled)
420[ 0.387181] audit: type=2000 audit(1406590614.384:1): initialized
421[ 0.398218] HugeTLB registered 2 MB page size, pre-allocated 0 pages
422[ 0.398380] VFS: Disk quotas dquot_6.5.2
423[ 0.398398] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
424[ 0.398438] msgmni has been set to 32008
425[ 0.398632] alg: No test for stdrng (krng)
426[ 0.398653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
427[ 0.398685] io scheduler noop registered
428[ 0.398686] io scheduler deadline registered
429[ 0.398701] io scheduler cfq registered (default)
430[ 0.398850] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
431[ 0.399009] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
432[ 0.399097] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
433[ 0.399173] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
434[ 0.399298] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
435[ 0.399299] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
436[ 0.399300] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
437[ 0.399305] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
438[ 0.399325] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
439[ 0.399327] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
440[ 0.399331] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
441[ 0.399352] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
442[ 0.399357] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
443[ 0.399367] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
444[ 0.399404] pciehp 0000:00:1c.2:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
445[ 0.399432] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
446[ 0.399436] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
447[ 0.399464] intel_idle: MWAIT substates: 0x21120
448[ 0.399465] intel_idle: v0.4 model 0x3A
449[ 0.399466] intel_idle: lapic_timer_reliable_states 0xffffffff
450[ 0.399605] GHES: HEST is not enabled!
451[ 0.399650] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
452[ 0.399996] Linux agpgart interface v0.103
453[ 0.400072] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
454[ 0.402404] serio: i8042 KBD port at 0x60,0x64 irq 1
455[ 0.402408] serio: i8042 AUX port at 0x60,0x64 irq 12
456[ 0.402510] mousedev: PS/2 mouse device common for all mice
457[ 0.402548] rtc_cmos 00:06: RTC can wake from S4
458[ 0.402667] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
459[ 0.402701] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
460[ 0.402708] Intel P-state driver initializing.
461[ 0.402717] Intel pstate controlling: cpu 0
462[ 0.402736] Intel pstate controlling: cpu 1
463[ 0.402747] Intel pstate controlling: cpu 2
464[ 0.402761] Intel pstate controlling: cpu 3
465[ 0.402780] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
466[ 0.402781] AMD IOMMUv2 functionality not available on this system
467[ 0.402855] TCP: cubic registered
468[ 0.402927] NET: Registered protocol family 10
469[ 0.403117] mip6: Mobile IPv6
470[ 0.403119] NET: Registered protocol family 17
471[ 0.403121] mpls_gso: MPLS GSO support
472[ 0.403336] registered taskstats version 1
473[ 0.403807] rtc_cmos 00:06: setting system clock to 2014-07-28 23:36:54 UTC (1406590614)
474[ 0.403877] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
475[ 0.404036] PM: Hibernation image not present or could not be loaded.
476[ 0.405028] Freeing unused kernel memory: 1008K (ffffffff818ba000 - ffffffff819b6000)
477[ 0.405031] Write protecting the kernel read-only data: 8192k
478[ 0.409491] Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000)
479[ 0.410732] Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000)
480[ 0.479079] systemd-udevd[72]: starting version 208
481[ 0.479441] random: systemd-udevd urandom read with 4 bits of entropy available
482[ 0.492346] pps_core: LinuxPPS API ver. 1 registered
483[ 0.492349] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
484[ 0.492482] PTP clock support registered
485[ 0.492670] ACPI: bus type USB registered
486[ 0.492696] usbcore: registered new interface driver usbfs
487[ 0.492707] usbcore: registered new interface driver hub
488[ 0.493095] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
489[ 0.493097] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
490[ 0.493180] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
491[ 0.493203] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
492[ 0.493345] thermal LNXTHERM:00: registered as thermal_zone0
493[ 0.493348] ACPI: Thermal Zone [THM0] (66 C)
494[ 0.494146] thermal LNXTHERM:01: registered as thermal_zone1
495[ 0.494148] ACPI: Thermal Zone [THM1] (27 C)
496[ 0.494400] usbcore: registered new device driver usb
497[ 0.494730] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
498[ 0.494925] ehci-pci: EHCI PCI platform driver
499[ 0.495107] sdhci: Secure Digital Host Controller Interface driver
500[ 0.495109] sdhci: Copyright(c) Pierre Ossman
501[ 0.495274] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
502[ 0.495619] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
503[ 0.496775] AVX version of gcm_enc/dec engaged.
504[ 0.496914] SCSI subsystem initialized
505[ 0.507655] libata version 3.00 loaded.
506[ 0.508303] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
507[ 0.510044] alg: No test for crc32 (crc32-pclmul)
508[ 0.694722] e1000e 0000:00:19.0 eth0: registered PHC clock
509[ 0.694729] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab
510[ 0.694731] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
511[ 0.694792] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
512[ 0.694916] ehci-pci 0000:00:1a.0: EHCI Host Controller
513[ 0.694923] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
514[ 0.694936] ehci-pci 0000:00:1a.0: debug port 2
515[ 0.698851] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
516[ 0.698866] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0635800
517[ 0.710442] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
518[ 0.710473] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
519[ 0.710475] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
520[ 0.710476] usb usb1: Product: EHCI Host Controller
521[ 0.710477] usb usb1: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
522[ 0.710478] usb usb1: SerialNumber: 0000:00:1a.0
523[ 0.710586] hub 1-0:1.0: USB hub found
524[ 0.710594] hub 1-0:1.0: 3 ports detected
525[ 0.710765] ehci-pci 0000:00:1d.0: EHCI Host Controller
526[ 0.710769] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
527[ 0.710779] ehci-pci 0000:00:1d.0: debug port 2
528[ 0.714678] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
529[ 0.714690] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0635c00
530[ 0.726486] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
531[ 0.726574] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
532[ 0.726575] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
533[ 0.726576] usb usb2: Product: EHCI Host Controller
534[ 0.726577] usb usb2: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
535[ 0.726578] usb usb2: SerialNumber: 0000:00:1d.0
536[ 0.726773] hub 2-0:1.0: USB hub found
537[ 0.726781] hub 2-0:1.0: 3 ports detected
538[ 0.726953] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
539[ 0.726955] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
540[ 0.726971] xhci_hcd 0000:00:14.0: xHCI Host Controller
541[ 0.726976] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
542[ 0.727079] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
543[ 0.727101] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
544[ 0.727166] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
545[ 0.727168] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
546[ 0.727170] usb usb3: Product: xHCI Host Controller
547[ 0.727172] usb usb3: Manufacturer: Linux 3.14-2-amd64 xhci_hcd
548[ 0.727173] usb usb3: SerialNumber: 0000:00:14.0
549[ 0.727286] hub 3-0:1.0: USB hub found
550[ 0.727299] hub 3-0:1.0: 4 ports detected
551[ 0.727420] xhci_hcd 0000:00:14.0: xHCI Host Controller
552[ 0.727422] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
553[ 0.727541] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
554[ 0.727543] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
555[ 0.727544] usb usb4: Product: xHCI Host Controller
556[ 0.727545] usb usb4: Manufacturer: Linux 3.14-2-amd64 xhci_hcd
557[ 0.727546] usb usb4: SerialNumber: 0000:00:14.0
558[ 0.727636] hub 4-0:1.0: USB hub found
559[ 0.727653] hub 4-0:1.0: 4 ports detected
560[ 0.727792] ahci 0000:00:1f.2: version 3.0
561[ 0.727895] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
562[ 0.727920] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
563[ 0.742495] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
564[ 0.742497] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
565[ 0.743098] scsi0 : ahci
566[ 0.743213] scsi1 : ahci
567[ 0.743303] scsi2 : ahci
568[ 0.743399] scsi3 : ahci
569[ 0.743493] scsi4 : ahci
570[ 0.743588] scsi5 : ahci
571[ 0.743631] ata1: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635100 irq 45
572[ 0.743635] ata2: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635180 irq 45
573[ 0.743638] ata3: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635200 irq 45
574[ 0.743639] ata4: DUMMY
575[ 0.743640] ata5: DUMMY
576[ 0.743642] ata6: DUMMY
577[ 1.022930] usb 1-1: new high-speed USB device number 2 using ehci-pci
578[ 1.062928] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
579[ 1.063244] ata1.00: supports DRM functions and may not be fully accessible
580[ 1.063447] ata1.00: disabling queued TRIM support
581[ 1.063451] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
582[ 1.063453] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
583[ 1.064342] ata1.00: supports DRM functions and may not be fully accessible
584[ 1.064546] ata1.00: disabling queued TRIM support
585[ 1.065099] ata1.00: configured for UDMA/133
586[ 1.065405] scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
587[ 1.155387] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
588[ 1.155393] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
589[ 1.155785] hub 1-1:1.0: USB hub found
590[ 1.155854] hub 1-1:1.0: 6 ports detected
591[ 1.267179] usb 2-1: new high-speed USB device number 2 using ehci-pci
592[ 1.383314] ata2: SATA link down (SStatus 0 SControl 300)
593[ 1.387308] tsc: Refined TSC clocksource calibration: 2793.653 MHz
594[ 1.399701] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
595[ 1.399706] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
596[ 1.400164] hub 2-1:1.0: USB hub found
597[ 1.400293] hub 2-1:1.0: 8 ports detected
598[ 1.471524] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
599[ 1.564905] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
600[ 1.564910] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
601[ 1.564913] usb 1-1.3: Product: Biometric Coprocessor
602[ 1.564915] usb 1-1.3: Manufacturer: Auth
603[ 1.635710] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
604[ 1.711726] ata3: SATA link down (SStatus 0 SControl 300)
605[ 1.716824] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
606[ 1.716832] sd 0:0:0:0: [sda] 4096-byte physical blocks
607[ 1.717053] sd 0:0:0:0: [sda] Write Protect is off
608[ 1.717060] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
609[ 1.717108] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
610[ 1.718911] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
611[ 1.720199] sd 0:0:0:0: [sda] Attached SCSI disk
612[ 1.721029] sd 0:0:0:0: Attached scsi generic sg0 type 0
613[ 1.731561] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
614[ 1.731568] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
615[ 1.731572] usb 1-1.4: Product: BCM20702A0
616[ 1.731576] usb 1-1.4: Manufacturer: Broadcom Corp
617[ 1.731580] usb 1-1.4: SerialNumber: 2016D8D6A3C7
618[ 1.790523] device-mapper: uevent: version 1.0.3
619[ 1.790631] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
620[ 1.803932] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
621[ 1.863855] raid6: sse2x1 5603 MB/s
622[ 1.903668] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
623[ 1.903671] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
624[ 1.903673] usb 1-1.6: Product: Integrated Camera
625[ 1.903674] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
626[ 1.931944] raid6: sse2x2 8753 MB/s
627[ 1.976133] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
628[ 2.000029] raid6: sse2x4 12641 MB/s
629[ 2.000031] raid6: using algorithm sse2x4 (12641 MB/s)
630[ 2.000031] raid6: using ssse3x2 recovery algorithm
631[ 2.000224] xor: automatically using best checksumming function:
632[ 2.040073] avx : 26624.000 MB/sec
633[ 2.041921] bio: create slab <bio-1> at 1
634[ 2.042084] Btrfs loaded
635[ 2.079517] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
636[ 2.079519] usb 2-1.4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
637[ 2.079520] usb 2-1.4: Product: Qualcomm Gobi 2000
638[ 2.079521] usb 2-1.4: Manufacturer: Qualcomm Incorporated
639[ 2.105836] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
640[ 2.107237] XFS (sda4): Mounting Filesystem
641[ 2.129520] XFS (sda4): Ending clean mount
642[ 2.309971] systemd-udevd[330]: starting version 208
643[ 2.388599] Switched to clocksource tsc
644[ 2.400444] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input2
645[ 2.400450] ACPI: Sleep Button [SLPB]
646[ 2.400513] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input3
647[ 2.401558] ACPI: Lid Switch [LID]
648[ 2.401618] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
649[ 2.401623] ACPI: Power Button [PWRF]
650[ 2.401900] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
651[ 2.403074] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
652[ 2.406577] [drm] Initialized drm 1.1.0 20060810
653[ 2.408854] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
654[ 2.411203] Non-volatile memory driver v1.3
655[ 2.417049] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
656[ 2.423257] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20131218/utaddress-258)
657[ 2.423262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
658[ 2.423266] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
659[ 2.423272] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
660[ 2.423273] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
661[ 2.423276] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
662[ 2.423278] lpc_ich: Resource conflict(s) found affecting gpio_ich
663[ 2.424864] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
664[ 2.430620] udevd[445]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
665[ 2.431190] cfg80211: Calling CRDA to update world regulatory domain
666[ 2.434722] Intel(R) Wireless WiFi driver for Linux, in-tree:
667[ 2.434724] Copyright(c) 2003- 2014 Intel Corporation
668[ 2.439444] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
669[ 2.440770] udevd[461]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
670[ 2.449940] ACPI: AC Adapter [AC] (on-line)
671[ 2.450829] input: PC Speaker as /devices/platform/pcspkr/input/input7
672[ 2.458711] udevd[504]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
673[ 2.461543] udevd[518]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
674[ 2.462967] udevd[525]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
675[ 2.464201] udevd[529]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
676[ 2.465409] acpi device:07: registered as cooling_device2
677[ 2.465578] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
678[ 2.465726] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
679[ 2.465753] thinkpad_acpi: ThinkPad ACPI Extras v0.25
680[ 2.465755] thinkpad_acpi: http://ibm-acpi.sf.net/
681[ 2.465757] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-6522-ge0ceac3, EC unknown
682[ 2.465758] thinkpad_acpi: Lenovo ThinkPad X230, model 2325TLU
683[ 2.466327] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
684[ 2.466671] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
685[ 2.466673] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
686[ 2.467839] usbcore: registered new interface driver usbserial
687[ 2.467851] usbcore: registered new interface driver usbserial_generic
688[ 2.467863] usbserial: USB Serial support registered for generic
689[ 2.469104] Bluetooth: Core ver 2.18
690[ 2.469116] NET: Registered protocol family 31
691[ 2.469118] Bluetooth: HCI device and connection manager initialized
692[ 2.469123] Bluetooth: HCI socket layer initialized
693[ 2.469125] Bluetooth: L2CAP socket layer initialized
694[ 2.469132] Bluetooth: SCO socket layer initialized
695[ 2.471139] usbcore: registered new interface driver qcserial
696[ 2.471153] usbserial: USB Serial support registered for Qualcomm USB modem
697[ 2.471279] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
698[ 2.471725] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
699[ 2.472201] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
700[ 2.472285] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
701[ 2.472820] media: Linux media interface: v0.10
702[ 2.474146] udevd[545]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
703[ 2.476818] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
704[ 2.476913] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
705[ 2.478363] Linux video capture interface: v2.00
706[ 2.478486] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
707[ 2.478565] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
708[ 2.480873] udevd[557]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
709[ 2.480974] [drm] Memory usable by graphics device = 2048M
710[ 2.481361] usbcore: registered new interface driver btusb
711[ 2.481657] i915 0000:00:02.0: irq 49 for MSI/MSI-X
712[ 2.481666] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
713[ 2.481667] [drm] Driver supports precise vblank timestamp query.
714[ 2.481671] i915 0000:00:02.0: Invalid ROM contents
715[ 2.481738] [drm] failed to find VBIOS tables
716[ 2.481819] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
717[ 2.482778] udevd[561]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
718[ 2.483121] ACPI: Battery Slot [BAT0] (battery present)
719[ 2.483504] ACPI: Battery Slot [BAT1] (battery absent)
720[ 2.483630] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
721[ 2.483689] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
722[ 2.483951] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
723[ 2.483953] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
724[ 2.483955] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
725[ 2.483957] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
726[ 2.484038] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
727[ 2.484475] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
728[ 2.492818] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
729[ 2.497694] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
730[ 2.497810] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
731[ 2.497867] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
732[ 2.497925] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
733[ 2.497980] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
734[ 2.498036] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
735[ 2.498084] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
736[ 2.499222] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input17
737[ 2.499308] usbcore: registered new interface driver uvcvideo
738[ 2.499309] USB Video Class driver (1.1.1)
739[ 2.507996] udevd[582]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
740[ 2.518486] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
741[ 2.538066] iTCO_vendor_support: vendor-support=0
742[ 2.539121] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
743[ 2.539151] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
744[ 2.539734] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
745[ 2.558422] cfg80211: World regulatory domain updated:
746[ 2.558425] cfg80211: DFS Master region: unset
747[ 2.558425] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
748[ 2.558426] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
749[ 2.558427] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
750[ 2.558428] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
751[ 2.558429] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
752[ 2.558430] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
753[ 2.558430] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
754[ 2.616824] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
755[ 2.634303] fbcon: inteldrmfb (fb0) is primary device
756[ 3.300908] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
757[ 3.300920] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
758[ 3.340587] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
759[ 3.405640] Console: switching to colour frame buffer device 170x48
760[ 3.409180] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
761[ 3.409183] i915 0000:00:02.0: registered panic notifier
762[ 3.409209] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
763[ 3.491872] usbcore: registered new interface driver cdc_wdm
764[ 3.495927] qmi_wwan 2-1.4:1.0: cdc-wdm0: USB WDM device
765[ 3.496142] qmi_wwan 2-1.4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.4, WWAN/QMI device, 0e:3c:62:92:f3:9c
766[ 3.496176] usbcore: registered new interface driver qmi_wwan
767[ 3.513255] udevd[666]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
768[ 3.732139] random: nonblocking pool is initialized
769[ 3.810566] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
770[ 6.233823] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
771[ 7.546973] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
772[ 7.747733] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input18
773[ 10.461847] bio: create slab <bio-2> at 2
774[ 10.555650] bio: create slab <bio-2> at 2
775[ 10.625660] lp: driver loaded but no devices found
776[ 10.631134] ppdev: user-space parallel port driver
777[ 10.642639] loop: module loaded
778[ 10.648639] fuse init (API version 7.22)
779[ 10.748912] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
780[ 10.751365] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
781[ 10.751921] XFS (dm-0): Mounting Filesystem
782[ 10.774582] XFS (dm-0): Ending clean mount
783[ 10.783988] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
784[ 10.784548] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
785[ 11.470594] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input19
786[ 11.613438] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
787[ 11.613439] Bluetooth: BNEP filters: protocol multicast
788[ 11.613511] Bluetooth: BNEP socket layer initialized
789[ 11.615434] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
790[ 11.619696] systemd-hostnamed[2665]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
791[ 11.622295] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
792[ 11.887883] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
793[ 11.894758] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
794[ 11.981923] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
795[ 12.114859] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
796[ 12.216854] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
797[ 12.217144] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
798[ 12.320629] systemd-logind[2735]: New seat seat0.
799[ 12.321747] systemd-logind[2735]: Watching system buttons on /dev/input/event3 (Power Button)
800[ 12.321814] systemd-logind[2735]: Watching system buttons on /dev/input/event6 (Video Bus)
801[ 12.321872] systemd-logind[2735]: Watching system buttons on /dev/input/event2 (Lid Switch)
802[ 12.321963] systemd-logind[2735]: Watching system buttons on /dev/input/event1 (Sleep Button)
803[ 12.322037] systemd-logind[2735]: Watching system buttons on /dev/input/event7 (ThinkPad Extra Buttons)
804[ 12.906466] systemd-logind[2735]: New session 1 of user Debian-gdm.
805[ 12.906526] systemd-logind[2735]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
806[ 16.743939] systemd-logind[2735]: New session c1 of user phcoder.
807[ 16.744068] systemd-logind[2735]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
808[ 19.883923] wlan0: authenticate with f0:84:2f:e4:66:79
809[ 19.888752] wlan0: send auth to f0:84:2f:e4:66:79 (try 1/3)
810[ 19.892181] wlan0: authenticated
811[ 19.894214] wlan0: associate with f0:84:2f:e4:66:79 (try 1/3)
812[ 19.897575] wlan0: RX AssocResp from f0:84:2f:e4:66:79 (capab=0x411 status=0 aid=2)
813[ 19.916491] wlan0: associated
814[ 19.916797] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
815[ 19.916828] cfg80211: Calling CRDA for country: CH
816[ 19.976981] cfg80211: Regulatory domain changed to country: CH
817[ 19.976985] cfg80211: DFS Master region: unset
818[ 19.976986] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
819[ 19.976988] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
820[ 19.976989] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
821[ 19.976991] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
822[ 19.976992] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm)
823[ 19.976993] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
824[ 20.029992] Bluetooth: RFCOMM TTY layer initialized
825[ 20.030005] Bluetooth: RFCOMM socket layer initialized
826[ 20.030011] Bluetooth: RFCOMM ver 1.11
827[ 22.752155] pool[3284]: segfault at ffffffffd82ea190 ip 00007f97f2bfd250 sp 00007f97e9d4e0c0 error 5 in libc-2.19.so[7f97f2bb5000+19f000]
828[ 37.050003] pool[3575]: segfault at 5c13ea30 ip 00007f856fd4a250 sp 00007f8566dd50c0 error 4 in libc-2.19.so[7f856fd02000+19f000]