Bill Strathearn | 0526e87 | 2014-11-22 07:38:31 -0800 | [diff] [blame] | 1 |
|
| 2 |
|
| 3 | coreboot-4.0-7027-g76ae2ca Thu Oct 16 01:08:57 CDT 2014 starting...
|
| 4 | Disabling Watchdog reboot... done.
|
| 5 | SMBus controller enabled.
|
| 6 | Setting up static northbridge registers... done.
|
| 7 | Initializing Graphics...
|
| 8 | Back from haswell_early_initialization()
|
| 9 | CPU id(40651) ucode:00000015 Intel(R) Celeron(R) 2955U @ 1.40GHz
|
| 10 | AES NOT supported, TXT NOT supported, VT supported
|
| 11 | PCH type: LP Mainstream, device id: 9c45, rev id 4
|
| 12 | Starting UEFI PEI System Agent
|
| 13 | find_current_mrc_cache_local: picked entry 0 from cache block
|
| 14 | prepare_mrc_cache: at ffb70010, size fe0 checksum 1d92
|
| 15 | System Agent: Starting up...
|
| 16 | System Agent: Initializing PCH
|
| 17 | install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
|
| 18 | install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
|
| 19 | System Agent: Initializing PCH (SMBUS)
|
| 20 | System Agent: Initializing PCH (USB)
|
| 21 | System Agent: Initializing PCH (SA Init)
|
| 22 | System Agent: Initializing PCH (Me UMA)
|
| 23 | System Agent: Initializing Memory
|
| 24 | System Agent: Done.
|
| 25 | Sanity checking heap.
|
| 26 | System Agent Version 1.6.1 Build 2
|
| 27 | memcfg DDR3 clock 1600 MHz
|
| 28 | memcfg channel assignment: A: 0, B 1, C 2
|
| 29 | memcfg channel[0] config (00600010):
|
| 30 | ECC inactive
|
| 31 | enhanced interleave mode on
|
| 32 | rank interleave on
|
| 33 | DIMMA 4096 MB width x8 or x32 single rank, selected
|
| 34 | DIMMB 0 MB width x8 or x32 single rank
|
| 35 | memcfg channel[1] config (00600010):
|
| 36 | ECC inactive
|
| 37 | enhanced interleave mode on
|
| 38 | rank interleave on
|
| 39 | DIMMA 4096 MB width x8 or x32 single rank, selected
|
| 40 | DIMMB 0 MB width x8 or x32 single rank
|
| 41 | ME: FW Partition Table : OK
|
| 42 | ME: Bringup Loader Failure : NO
|
| 43 | ME: Firmware Init Complete : NO
|
| 44 | ME: Manufacturing Mode : NO
|
| 45 | ME: Boot Options Present : NO
|
| 46 | ME: Update In Progress : NO
|
| 47 | ME: Current Working State : Normal
|
| 48 | ME: Current Operation State : Bring up
|
| 49 | ME: Current Operation Mode : Normal
|
| 50 | ME: Error Code : No Error
|
| 51 | ME: Progress Phase : BUP Phase
|
| 52 | ME: Power Management Event : Pseudo-global reset
|
| 53 | ME: Progress Phase State : 0x2b
|
| 54 | CBMEM: root @ 7f7ff000 254 entries.
|
| 55 | Relocate MRC DATA from ff7d0320 to 7f7dd000 (4064 bytes)
|
| 56 | Trying CBFS ramstage loader.
|
| 57 | CBFS: loading stage fallback/ramstage @ 0x100000 (307260 bytes), entry @ 0x100000
|
| 58 | coreboot-4.0-7027-g76ae2ca Thu Oct 16 01:08:57 CDT 2014 booting...
|
| 59 | clocks_per_usec: 1400
|
| 60 | CBMEM: recovering 6/254 entries from root @ 7f7ff000
|
| 61 | Moving GDT to 7f7d6000...ok
|
| 62 | BS: BS_PRE_DEVICE times (us): entry 11 run 4 exit 4
|
| 63 | BS: BS_DEV_INIT_CHIPS times (us): entry 4 run 5 exit 4
|
| 64 | Enumerating buses...
|
| 65 | CPU_CLUSTER: 0 enabled
|
| 66 | DOMAIN: 0000 enabled
|
| 67 | PCI: pci_scan_bus for bus 00
|
| 68 | Normal boot.
|
| 69 | PCI: 00:00.0 [8086/0a04] enabled
|
| 70 | PCI: 00:02.0 [8086/0a06] enabled
|
| 71 | PCI: 00:03.0 [8086/0a0c] enabled
|
| 72 | PCI: 00:13.0: Disabling device
|
| 73 | PCI: 00:13.0 [8086/9c36] disabled No operations
|
| 74 | PCI: 00:14.0 [8086/9c31] enabled
|
| 75 | PCI: 00:15.0: Disabling device
|
| 76 | IOBP: set 0xce00aa07 to 0x00000100
|
| 77 | PCI: 00:15.1: Disabling device
|
| 78 | IOBP: set 0xce00aa47 to 0x00000100
|
| 79 | PCI: 00:15.2: Disabling device
|
| 80 | IOBP: set 0xce00aa87 to 0x00000100
|
| 81 | PCI: 00:15.3: Disabling device
|
| 82 | IOBP: set 0xce00aac7 to 0x00000100
|
| 83 | PCI: 00:15.4: Disabling device
|
| 84 | IOBP: set 0xce00ab07 to 0x00000100
|
| 85 | PCI: 00:15.5: Disabling device
|
| 86 | IOBP: set 0xce00ab47 to 0x00000100
|
| 87 | PCI: 00:15.6: Disabling device
|
| 88 | IOBP: set 0xce00ab87 to 0x00000100
|
| 89 | PCI: 00:16.0 [8086/9c3a] enabled
|
| 90 | PCI: 00:16.1: Disabling device
|
| 91 | PCI: 00:16.1 [8086/9c3b] disabled No operations
|
| 92 | PCI: 00:16.2: Disabling device
|
| 93 | PCI: 00:16.3: Disabling device
|
| 94 | PCI: 00:17.0: Disabling device
|
| 95 | IOBP: set 0xce00ae07 to 0x00000100
|
| 96 | PCI: 00:19.0: Disabling device
|
| 97 | PCI: 00:1b.0 [8086/9c20] enabled
|
| 98 | PCI: 00:1c.0 [8086/9c10] disabled
|
| 99 | PCI: 00:1c.1 [8086/9c12] disabled
|
| 100 | PCIe Root Port 3 ASPM is disabled
|
| 101 | PCI: 00:1c.2 [8086/9c14] enabled
|
| 102 | PCIe Root Port 4 ASPM is disabled
|
| 103 | PCI: 00:1c.3 [8086/9c16] enabled
|
| 104 | PCIe Root Port 5 ASPM is enabled
|
| 105 | IOBP: set 0xe9000c40 to 0x05050e00
|
| 106 | IOBP: set 0xe9000e40 to 0x05050e00
|
| 107 | IOBP: set 0xe9001040 to 0x05050e00
|
| 108 | IOBP: set 0xe9001240 to 0x05050e00
|
| 109 | PCI: 00:1c.4 [8086/9c18] enabled
|
| 110 | PCI: 00:1c.0: Disabling device
|
| 111 | PCI: 00:1c.1: Disabling device
|
| 112 | PCI: 00:1c.5: Disabling device
|
| 113 | PCH: PCIe map 1c.2 -> 1c.0
|
| 114 | PCH: PCIe map 1c.3 -> 1c.1
|
| 115 | PCH: PCIe map 1c.4 -> 1c.2
|
| 116 | PCH: PCIe map 1c.0 -> 1c.3
|
| 117 | PCH: PCIe map 1c.1 -> 1c.4
|
| 118 | PCI: 00:1c.5 [8086/9c1a] disabled
|
| 119 | PCI: 00:1d.0 [8086/9c26] enabled
|
| 120 | PCI: 00:1e.0: Disabling device
|
| 121 | PCI: 00:1f.0 [8086/9c45] enabled
|
| 122 | PCI: 00:1f.2 [8086/9c03] enabled
|
| 123 | PCI: 00:1f.3 [8086/9c22] enabled
|
| 124 | PCI: 00:1f.6 [8086/9c24] enabled
|
| 125 | PCI: pci_scan_bus for bus 01
|
| 126 | PCI: 01:00.0 [10ec/8168] enabled
|
| 127 | PCI: pci_scan_bus returning with max=001
|
| 128 | Enabling Common Clock Configuration
|
| 129 | ASPM: Enabled L1
|
| 130 | PCI: pci_scan_bus for bus 02
|
| 131 | PCI: 02:00.0 [168c/0034] enabled
|
| 132 | PCI: pci_scan_bus returning with max=002
|
| 133 | Enabling Common Clock Configuration
|
| 134 | ASPM: Enabled L0s and L1
|
| 135 | PCI: pci_scan_bus for bus 03
|
| 136 | PCI: pci_scan_bus returning with max=003
|
| 137 | PNP: 002e.0 disabled
|
| 138 | PNP: 002e.1 enabled
|
| 139 | PNP: 002e.4 enabled
|
| 140 | PNP: 002e.7 enabled
|
| 141 | PNP: 002e.5 enabled
|
| 142 | PNP: 002e.6 enabled
|
| 143 | PNP: 002e.a disabled
|
| 144 | PCI: pci_scan_bus returning with max=003
|
| 145 | done
|
| 146 | BS: BS_DEV_ENUMERATE times (us): entry 3 run 1342 exit 3
|
| 147 | found VGA at PCI: 00:02.0
|
| 148 | Setting up VGA for PCI: 00:02.0
|
| 149 | Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
|
| 150 | Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
|
| 151 | Allocating resources...
|
| 152 | Reading resources...
|
| 153 | APIC: 00 missing read_resources
|
| 154 | mc_add_fixed_mmio_resources: Adding PCIEXBAR @ 60 0xf0000000-0xf3ffffff.
|
| 155 | mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff.
|
| 156 | mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff.
|
| 157 | mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff.
|
| 158 | mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff.
|
| 159 | MC MAP: TOM: 0x200000000
|
| 160 | MC MAP: TOUUD: 0x27ce00000
|
| 161 | MC MAP: MESEG_BASE: 0x1ff000000
|
| 162 | MC MAP: MESEG_LIMIT: 0x7fff0fffff
|
| 163 | MC MAP: REMAP_BASE: 0x1ff000000
|
| 164 | MC MAP: REMAP_LIMIT: 0x27cdfffff
|
| 165 | MC MAP: TOLUD: 0x82200000
|
| 166 | MC MAP: BGSM: 0x80000000
|
| 167 | MC MAP: BDSM: 0x80200000
|
| 168 | MC MAP: TESGMB: 0x7f800000
|
| 169 | MC MAP: GGC: 0x209
|
| 170 | Done reading resources.
|
| 171 | skipping PNP: 002e.4@f2 fixed resource, size=0!
|
| 172 | Setting resources...
|
| 173 | PCI: 00:02.0 10 <- [0x00e0000000 - 0x00e03fffff] size 0x00400000 gran 0x16 mem64
|
| 174 | PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64
|
| 175 | PCI: 00:02.0 20 <- [0x0000003000 - 0x000000303f] size 0x00000040 gran 0x06 io
|
| 176 | PCI: 00:03.0 10 <- [0x00e0710000 - 0x00e0713fff] size 0x00004000 gran 0x0e mem64
|
| 177 | PCI: 00:14.0 10 <- [0x00e0700000 - 0x00e070ffff] size 0x00010000 gran 0x10 mem64
|
| 178 | PCI: 00:16.0 10 <- [0x00e0719d00 - 0x00e0719d1f] size 0x00000020 gran 0x05 mem64
|
| 179 | PCI: 00:1b.0 10 <- [0x00e0714000 - 0x00e0717fff] size 0x00004000 gran 0x0e mem64
|
| 180 | PCI: 00:1c.0 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 01 io
|
| 181 | PCI: 00:1c.0 24 <- [0x00e0400000 - 0x00e04fffff] size 0x00100000 gran 0x14 bus 01 prefmem
|
| 182 | PCI: 00:1c.0 20 <- [0x00e0500000 - 0x00e05fffff] size 0x00100000 gran 0x14 bus 01 mem
|
| 183 | PCI: 01:00.0 10 <- [0x0000002000 - 0x00000020ff] size 0x00000100 gran 0x08 io
|
| 184 | PCI: 01:00.0 18 <- [0x00e0500000 - 0x00e0500fff] size 0x00001000 gran 0x0c mem64
|
| 185 | PCI: 01:00.0 20 <- [0x00e0400000 - 0x00e0403fff] size 0x00004000 gran 0x0e prefmem64
|
| 186 | PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io
|
| 187 | PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem
|
| 188 | PCI: 00:1c.1 20 <- [0x00e0600000 - 0x00e06fffff] size 0x00100000 gran 0x14 bus 02 mem
|
| 189 | PCI: 02:00.0 10 <- [0x00e0600000 - 0x00e067ffff] size 0x00080000 gran 0x13 mem64
|
| 190 | PCI: 02:00.0 30 <- [0x00e0680000 - 0x00e068ffff] size 0x00010000 gran 0x10 romem
|
| 191 | PCI: 00:1c.2 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io
|
| 192 | PCI: 00:1c.2 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem
|
| 193 | PCI: 00:1c.2 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 mem
|
| 194 | PCI: 00:1d.0 10 <- [0x00e0719800 - 0x00e0719bff] size 0x00000400 gran 0x0a mem
|
| 195 | PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
|
| 196 | PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
|
| 197 | PNP: 002e.4 60 <- [0x0000000700 - 0x0000000707] size 0x00000008 gran 0x03 io
|
| 198 | PNP: 002e.4 62 <- [0x0000000710 - 0x0000000713] size 0x00000004 gran 0x02 io
|
| 199 | PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] size 0x00000001 gran 0x00 irq
|
| 200 | PNP: 002e.4 f2 <- [0x0000000020 - 0x000000001f] size 0x00000000 gran 0x00 irq
|
| 201 | PNP: 002e.4 f4 <- [0x0000000000 - 0x0000000000] size 0x00000001 gran 0x00 irq
|
| 202 | PNP: 002e.4 fa <- [0x0000000012 - 0x0000000012] size 0x00000001 gran 0x00 irq
|
| 203 | PNP: 002e.7 60 <- [0x0000000720 - 0x0000000720] size 0x00000001 gran 0x00 io
|
| 204 | PNP: 002e.7 62 <- [0x0000000730 - 0x0000000737] size 0x00000008 gran 0x03 io
|
| 205 | PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io
|
| 206 | PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io
|
| 207 | PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq
|
| 208 | PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq
|
| 209 | PCI: 00:1f.2 10 <- [0x0000003060 - 0x0000003067] size 0x00000008 gran 0x03 io
|
| 210 | PCI: 00:1f.2 14 <- [0x0000003070 - 0x0000003073] size 0x00000004 gran 0x02 io
|
| 211 | PCI: 00:1f.2 18 <- [0x0000003068 - 0x000000306f] size 0x00000008 gran 0x03 io
|
| 212 | PCI: 00:1f.2 1c <- [0x0000003074 - 0x0000003077] size 0x00000004 gran 0x02 io
|
| 213 | PCI: 00:1f.2 20 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io
|
| 214 | PCI: 00:1f.2 24 <- [0x00e0719000 - 0x00e07197ff] size 0x00000800 gran 0x0b mem
|
| 215 | PCI: 00:1f.3 10 <- [0x00e0719c00 - 0x00e0719cff] size 0x00000100 gran 0x08 mem64
|
| 216 | PCI: 00:1f.6 10 <- [0x00e0718000 - 0x00e0718fff] size 0x00001000 gran 0x0c mem64
|
| 217 | Done setting resources.
|
| 218 | Done allocating resources.
|
| 219 | BS: BS_DEV_RESOURCES times (us): entry 4 run 1671 exit 3
|
| 220 | Enabling resources...
|
| 221 | PCI: 00:00.0 subsystem <- 1ae0/c000
|
| 222 | PCI: 00:00.0 cmd <- 06
|
| 223 | PCI: 00:02.0 subsystem <- 1ae0/c000
|
| 224 | PCI: 00:02.0 cmd <- 03
|
| 225 | PCI: 00:03.0 subsystem <- 1ae0/c000
|
| 226 | PCI: 00:03.0 cmd <- 02
|
| 227 | PCI: 00:14.0 subsystem <- 1ae0/c000
|
| 228 | PCI: 00:14.0 cmd <- 102
|
| 229 | PCI: 00:16.0 subsystem <- 1ae0/c000
|
| 230 | PCI: 00:16.0 cmd <- 02
|
| 231 | PCI: 00:1b.0 subsystem <- 1ae0/c000
|
| 232 | PCI: 00:1b.0 cmd <- 102
|
| 233 | PCI: 00:1c.0 bridge ctrl <- 0003
|
| 234 | PCI: 00:1c.0 subsystem <- 1ae0/c000
|
| 235 | PCI: 00:1c.0 cmd <- 07
|
| 236 | PCI: 00:1c.1 bridge ctrl <- 0003
|
| 237 | PCI: 00:1c.1 subsystem <- 1ae0/c000
|
| 238 | PCI: 00:1c.1 cmd <- 06
|
| 239 | PCI: 00:1c.2 bridge ctrl <- 0003
|
| 240 | PCI: 00:1c.2 subsystem <- 1ae0/c000
|
| 241 | PCI: 00:1c.2 cmd <- 00
|
| 242 | PCI: 00:1d.0 subsystem <- 1ae0/c000
|
| 243 | PCI: 00:1d.0 cmd <- 102
|
| 244 | PCI: 00:1f.0 subsystem <- 1ae0/c000
|
| 245 | PCI: 00:1f.0 cmd <- 107
|
| 246 | PCI: 00:1f.2 subsystem <- 1ae0/c000
|
| 247 | PCI: 00:1f.2 cmd <- 103
|
| 248 | PCI: 00:1f.3 subsystem <- 1ae0/c000
|
| 249 | PCI: 00:1f.3 cmd <- 103
|
| 250 | PCI: 00:1f.6 subsystem <- 1ae0/c000
|
| 251 | PCI: 00:1f.6 cmd <- 102
|
| 252 | PCI: 01:00.0 cmd <- 03
|
| 253 | PCI: 02:00.0 cmd <- 02
|
| 254 | done.
|
| 255 | BS: BS_DEV_ENABLE times (us): entry 4 run 219 exit 4
|
| 256 | Initializing devices...
|
| 257 | Root Device init
|
| 258 | CBFS: ERROR: No file header found at 0x7ff840 - try next aligned address: 0x7ff880.
|
| 259 | CBFS: WARNING: 'vpd.bin' not found.
|
| 260 | CBFS: Could not find file 'vpd.bin'.
|
| 261 | Realtek NIC io_base = 0x2000
|
| 262 | Programming MAC Address
|
| 263 | Root Device init 709 usecs
|
| 264 | CPU_CLUSTER: 0 init
|
| 265 | CPU has 2 cores, 2 threads enabled.
|
| 266 | MTRR: Physical address space:
|
| 267 | 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
|
| 268 | 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
|
| 269 | 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6
|
| 270 | 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0
|
| 271 | 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
|
| 272 | 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
|
| 273 | 0x0000000100000000 - 0x000000027ce00000 size 0x17ce00000 type 6
|
| 274 | MTRR: Fixed MSR 0x250 0x0606060606060606
|
| 275 | MTRR: Fixed MSR 0x258 0x0606060606060606
|
| 276 | MTRR: Fixed MSR 0x259 0x0000000000000000
|
| 277 | MTRR: Fixed MSR 0x268 0x0606060606060606
|
| 278 | MTRR: Fixed MSR 0x269 0x0606060606060606
|
| 279 | MTRR: Fixed MSR 0x26a 0x0606060606060606
|
| 280 | MTRR: Fixed MSR 0x26b 0x0606060606060606
|
| 281 | MTRR: Fixed MSR 0x26c 0x0606060606060606
|
| 282 | MTRR: Fixed MSR 0x26d 0x0606060606060606
|
| 283 | MTRR: Fixed MSR 0x26e 0x0606060606060606
|
| 284 | MTRR: Fixed MSR 0x26f 0x0606060606060606
|
| 285 | MTRR: default type WB/UC MTRR counts: 4/7.
|
| 286 | MTRR: WB selected as default type.
|
| 287 | MTRR: 0 base 0x0000000080000000 mask 0x0000007fc0000000 type 0
|
| 288 | MTRR: 1 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0
|
| 289 | MTRR: 2 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1
|
| 290 | MTRR: 3 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0
|
| 291 |
|
| 292 | MTRR check
|
| 293 | Fixed MTRRs : Enabled
|
| 294 | Variable MTRRs: Enabled
|
| 295 |
|
| 296 | Initializing VR config.
|
| 297 | PCODE: 24MHz BLCK calibration response: 0
|
| 298 | PCODE: 24MHz BLCK calibration value: 0x85000000
|
| 299 | PCH Power: PCODE Levels 0x3f1c40c1 0x0044c288
|
| 300 | microcode: sig=0x40651 pf=0x40 revision=0x15
|
| 301 | Setting up SMI for CPU
|
| 302 | Loading module at 00038000 with entry 00038000. filesize: 0x148 memsize: 0x148
|
| 303 | Processing 10 relocs. Offset value of 0x00038000
|
| 304 | SMM Module: stub loaded at 00038000. Will call 0011b958(0013e620)
|
| 305 | Installing SMM handler to 0x7f800000
|
| 306 | Loading module at 7f810000 with entry 7f810301. filesize: 0x2190 memsize: 0x61b0
|
| 307 | Processing 64 relocs. Offset value of 0x7f810000
|
| 308 | Loading module at 7f808000 with entry 7f808000. filesize: 0x148 memsize: 0x148
|
| 309 | Processing 10 relocs. Offset value of 0x7f808000
|
| 310 | SMM Module: placing jmp sequence at 7f807c00 rel16 0x03fd
|
| 311 | SMM Module: stub loaded at 7f808000. Will call 7f810301(00000000)
|
| 312 | Initializing Southbridge SMI...
|
| 313 | In relocation handler: cpu 0
|
| 314 | New SMBASE=0x7f800000 IEDBASE=0x7fc00000
|
| 315 | Writing SMRR. base = 0x7f800006, mask=0xff800800
|
| 316 | Relocation complete.
|
| 317 | CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz.
|
| 318 | Loading module at 00030000 with entry 00030000. filesize: 0x138 memsize: 0x138
|
| 319 | Processing 16 relocs. Offset value of 0x00030000
|
| 320 | Attempting to start 1 APs
|
| 321 | Waiting for 10ms after sending INIT.
|
| 322 | Waiting for 1st SIPI to complete...done.
|
| 323 | Waiting for 2nd SIPI to complete...done.
|
| 324 | AP: slot 1 apic_id 2.
|
| 325 | In relocation handler: cpu 1
|
| 326 | New SMBASE=0x7f7ffc00 IEDBASE=0x7fc00000
|
| 327 | Writing SMRR. base = 0x7f800006, mask=0xff800800
|
| 328 | Relocation complete.
|
| 329 | Initializing CPU #0
|
| 330 | CPU: vendor Intel device 40651
|
| 331 | CPU: family 06, model 45, stepping 01
|
| 332 | Setting up local apic... apic_id: 0x00 done.
|
| 333 | VMX is locked, so enable_vmx will do nothing
|
| 334 | haswell: energy policy set to 6
|
| 335 | haswell: frequency set to 1400
|
| 336 | Turbo is unavailable
|
| 337 | CPU #0 initialized
|
| 338 | Initializing CPU #1
|
| 339 | CPU: vendor Intel device 40651
|
| 340 | CPU: family 06, model 45, stepping 01
|
| 341 | Setting up local apic... apic_id: 0x02 done.
|
| 342 | VMX is locked, so enable_vmx will do nothing
|
| 343 | haswell: energy policy set to 6
|
| 344 | haswell: frequency set to 1400
|
| 345 | CPU #1 initialized
|
| 346 | Enabling SMIs.
|
| 347 | Locking SMM.
|
| 348 | CPU_CLUSTER: 0 init 20282 usecs
|
| 349 | PCI: 00:00.0 init
|
| 350 | Set BIOS_RESET_CPL
|
| 351 | CPU TDP: 15 Watts
|
| 352 | PCI: 00:00.0 init 1014 usecs
|
| 353 | PCI: 00:02.0 init
|
| 354 | GT Power Management Init
|
| 355 | GT Power Management Init (post VBIOS)
|
| 356 | PCI: 00:02.0 init 133 usecs
|
| 357 | PCI: 00:03.0 init
|
| 358 | Mini-HD: base = e0710000
|
| 359 | HDA: Initializing codec #0
|
| 360 | HDA: codec viddid: 80862807
|
| 361 | HDA: verb loaded.
|
| 362 | PCI: 00:03.0 init 1361 usecs
|
| 363 | PCI: 00:14.0 init
|
| 364 | IOBP: set 0xe5004001 to 0x000000ce
|
| 365 | PCI: 00:14.0 init 1097 usecs
|
| 366 | PCI: 00:16.0 init
|
| 367 | ME: FW Partition Table : OK
|
| 368 | ME: Bringup Loader Failure : NO
|
| 369 | ME: Firmware Init Complete : NO
|
| 370 | ME: Manufacturing Mode : NO
|
| 371 | ME: Boot Options Present : NO
|
| 372 | ME: Update In Progress : NO
|
| 373 | ME: Current Working State : Normal
|
| 374 | ME: Current Operation State : M0 with UMA
|
| 375 | ME: Current Operation Mode : Normal
|
| 376 | ME: Error Code : No Error
|
| 377 | ME: Progress Phase : uKernel Phase
|
| 378 | ME: Power Management Event : Pseudo-global reset
|
| 379 | ME: Progress Phase State : Unknown phase: 0x02 sate: 0x00
|
| 380 | ME: BIOS path: Normal
|
| 381 | ME: Extend SHA-256: 4822ca12b90cdd73e39caab8cdba777ac831451069f18f0be9b0340e9ad356e3
|
| 382 | ME MBP: Header: items: 9, size dw: 37
|
| 383 | ME: found version 9.5.13.1706
|
| 384 | ME: Wake Event to ME Reset: 0 ms
|
| 385 | ME: ME Reset to Platform Reset: 7 ms
|
| 386 | ME: Platform Reset to CPU Reset: 44 ms
|
| 387 | ME: ICC SET CLOCK ENABLES 0x01220000
|
| 388 | PCI: 00:16.0 init 64 usecs
|
| 389 | PCI: 00:1b.0 init
|
| 390 | Azalia: base = e0714000
|
| 391 | Azalia: codec_mask = 01
|
| 392 | HDA: Initializing codec #0
|
| 393 | HDA: codec viddid: 10ec0283
|
| 394 | HDA: verb loaded.
|
| 395 | PCI: 00:1b.0 init 3316 usecs
|
| 396 | PCI: 00:1c.0 init
|
| 397 | Initializing PCH PCIe bridge.
|
| 398 | PCI: 00:1c.0 init 10 usecs
|
| 399 | PCI: 00:1c.1 init
|
| 400 | Initializing PCH PCIe bridge.
|
| 401 | PCI: 00:1c.1 init 9 usecs
|
| 402 | PCI: 00:1c.2 init
|
| 403 | Initializing PCH PCIe bridge.
|
| 404 | PCI: 00:1c.2 init 10 usecs
|
| 405 | PCI: 00:1d.0 init
|
| 406 | EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce
|
| 407 | done.
|
| 408 | PCI: 00:1d.0 init 36 usecs
|
| 409 | PCI: 00:1f.0 init
|
| 410 | pch: lpc_init
|
| 411 | IOAPIC: Initializing IOAPIC at 0xfec00000
|
| 412 | IOAPIC: Bootstrap Processor Local APIC = 0x00
|
| 413 | IOAPIC: ID = 0x02
|
| 414 | Set power state keep after power failure.
|
| 415 | NMI sources disabled.
|
| 416 | LynxPoint LP PM init
|
| 417 | IOBP: set 0xed00015c to 0x1bc33700
|
| 418 | IOBP: set 0xed000118 to 0x00c00000
|
| 419 | IOBP: set 0xed000120 to 0x00245560
|
| 420 | IOBP: set 0xca000000 to 0x00000009
|
| 421 | IOBP: set 0xcf000000 to 0x00007007
|
| 422 | IOBP: set 0xce00c000 to 0x00000000
|
| 423 | rtc_failed = 0x0
|
| 424 | RTC Init
|
| 425 | Disabling ACPI via APMC:
|
| 426 | done.
|
| 427 | PCI: 00:1f.0 init 362 usecs
|
| 428 | PCI: 00:1f.2 init
|
| 429 | SATA: Initializing...
|
| 430 | SATA: Controller in AHCI mode.
|
| 431 | ABAR: E0719000
|
| 432 | PCI: 00:1f.2 init 30 usecs
|
| 433 | PCI: 00:1f.3 init
|
| 434 | PCI: 00:1f.3 init 7 usecs
|
| 435 | PCI: 00:1f.6 init
|
| 436 | PCI: 00:1f.6 init 3 usecs
|
| 437 | PCI: 01:00.0 init
|
| 438 | PCI: 01:00.0 init 3 usecs
|
| 439 | PCI: 02:00.0 init
|
| 440 | PCI: 02:00.0 init 3 usecs
|
| 441 | PNP: 002e.1 init
|
| 442 | PNP: 002e.1 init 3 usecs
|
| 443 | PNP: 002e.4 init
|
| 444 | PNP: 002e.4 init 52 usecs
|
| 445 | PNP: 002e.7 init
|
| 446 | PNP: 002e.7 init 3 usecs
|
| 447 | PNP: 002e.5 init
|
| 448 | PNP: 002e.5 init 3 usecs
|
| 449 | PNP: 002e.6 init
|
| 450 | PNP: 002e.6 init 3 usecs
|
| 451 | Devices initialized
|
| 452 | BS: BS_DEV_INIT times (us): entry 4 run 28605 exit 3
|
| 453 | Finalize devices...
|
| 454 | Devices finalized
|
| 455 | BS: BS_POST_DEVICE times (us): entry 2 run 5 exit 3
|
| 456 | BS: BS_OS_RESUME_CHECK times (us): entry 3 run 3 exit 3
|
| 457 | Updating MRC cache data.
|
| 458 | find_current_mrc_cache_local: picked entry 0 from cache block
|
| 459 | MRC data in flash is up to date. No update.
|
| 460 | ACPI: Writing ACPI tables at 7f7a1000.
|
| 461 | ACPI: * FACS
|
| 462 | ACPI: * DSDT
|
| 463 | ACPI: * FADT
|
| 464 | ACPI: added table 1/32, length now 40
|
| 465 | ACPI: * SSDT
|
| 466 | Found 1 CPU(s) with 2 core(s) each.
|
| 467 | PSS: 1400MHz power 15000 control 0xe00 status 0xe00
|
| 468 | PSS: 1200MHz power 12559 control 0xc00 status 0xc00
|
| 469 | PSS: 1000MHz power 10217 control 0xa00 status 0xa00
|
| 470 | PSS: 800MHz power 7982 control 0x800 status 0x800
|
| 471 | PSS: 1400MHz power 15000 control 0xe00 status 0xe00
|
| 472 | PSS: 1200MHz power 12559 control 0xc00 status 0xc00
|
| 473 | PSS: 1000MHz power 10217 control 0xa00 status 0xa00
|
| 474 | PSS: 800MHz power 7982 control 0x800 status 0x800
|
| 475 | ACPI: added table 2/32, length now 44
|
| 476 | ACPI: * MCFG
|
| 477 | ACPI: added table 3/32, length now 48
|
| 478 | ACPI: * MADT
|
| 479 | ACPI: added table 4/32, length now 52
|
| 480 | current = 7f7a5d30
|
| 481 | ACPI: * HPET
|
| 482 | ACPI: added table 5/32, length now 56
|
| 483 | ACPI: * SSDT2
|
| 484 | ACPI: added table 6/32, length now 60
|
| 485 | current = 7f7a5dd0
|
| 486 | ACPI: done.
|
| 487 | ACPI tables: 19920 bytes.
|
| 488 | smbios_write_tables: 7f79f000
|
| 489 | Root Device (Google Panther)
|
| 490 | CPU_CLUSTER: 0 (Intel i7 (Haswell) integrated Northbridge)
|
| 491 | APIC: 00 (Socket rPGA989 CPU)
|
| 492 | APIC: acac (Intel Haswell CPU)
|
| 493 | DOMAIN: 0000 (Intel i7 (Haswell) integrated Northbridge)
|
| 494 | PCI: 00:00.0 (Intel i7 (Haswell) integrated Northbridge)
|
| 495 | PCI: 00:02.0 (Intel i7 (Haswell) integrated Northbridge)
|
| 496 | PCI: 00:03.0 (Intel i7 (Haswell) integrated Northbridge)
|
| 497 | PCI: 00:13.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 498 | PCI: 00:14.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 499 | PCI: 00:15.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 500 | PCI: 00:15.1 (Intel Series 8 (Lynx Point) Southbridge)
|
| 501 | PCI: 00:15.2 (Intel Series 8 (Lynx Point) Southbridge)
|
| 502 | PCI: 00:15.3 (Intel Series 8 (Lynx Point) Southbridge)
|
| 503 | PCI: 00:15.4 (Intel Series 8 (Lynx Point) Southbridge)
|
| 504 | PCI: 00:15.5 (Intel Series 8 (Lynx Point) Southbridge)
|
| 505 | PCI: 00:15.6 (Intel Series 8 (Lynx Point) Southbridge)
|
| 506 | PCI: 00:16.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 507 | PCI: 00:16.1 (Intel Series 8 (Lynx Point) Southbridge)
|
| 508 | PCI: 00:16.2 (Intel Series 8 (Lynx Point) Southbridge)
|
| 509 | PCI: 00:16.3 (Intel Series 8 (Lynx Point) Southbridge)
|
| 510 | PCI: 00:17.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 511 | PCI: 00:19.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 512 | PCI: 00:1b.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 513 | PCI: 00:1c.3 (Intel Series 8 (Lynx Point) Southbridge)
|
| 514 | PCI: 00:1c.4 (Intel Series 8 (Lynx Point) Southbridge)
|
| 515 | PCI: 00:1c.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 516 | PCI: 00:1c.1 (Intel Series 8 (Lynx Point) Southbridge)
|
| 517 | PCI: 00:1c.2 (Intel Series 8 (Lynx Point) Southbridge)
|
| 518 | PCI: 00:1c.5 (Intel Series 8 (Lynx Point) Southbridge)
|
| 519 | PCI: 00:1d.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 520 | PCI: 00:1e.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 521 | PCI: 00:1f.0 (Intel Series 8 (Lynx Point) Southbridge)
|
| 522 | PNP: 002e.0 (ITE IT8772F Super I/O)
|
| 523 | PNP: 002e.1 (ITE IT8772F Super I/O)
|
| 524 | PNP: 002e.4 (ITE IT8772F Super I/O)
|
| 525 | PNP: 002e.7 (ITE IT8772F Super I/O)
|
| 526 | PNP: 002e.5 (ITE IT8772F Super I/O)
|
| 527 | PNP: 002e.6 (ITE IT8772F Super I/O)
|
| 528 | PNP: 002e.a (ITE IT8772F Super I/O)
|
| 529 | PCI: 00:1f.2 (Intel Series 8 (Lynx Point) Southbridge)
|
| 530 | PCI: 00:1f.3 (Intel Series 8 (Lynx Point) Southbridge)
|
| 531 | PCI: 00:1f.6 (Intel Series 8 (Lynx Point) Southbridge)
|
| 532 | PCI: 01:00.0 (unknown)
|
| 533 | PCI: 02:00.0 (unknown)
|
| 534 | APIC: 02 (unknown)
|
| 535 | SMBIOS tables: 330 bytes.
|
| 536 | Writing table forward entry at 0x00000500
|
| 537 | Wrote coreboot table at: 00000500, 0x10 bytes, checksum 1075
|
| 538 | Table forward entry ends at 0x00000528.
|
| 539 | ... aligned to 0x00001000
|
| 540 | Writing coreboot table at 0x7f697000
|
| 541 | rom_table_end = 0x7f697000
|
| 542 | ... aligned to 0x7f6a0000
|
| 543 | 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
|
| 544 | 1. 0000000000001000-000000000009ffff: RAM
|
| 545 | 2. 00000000000a0000-00000000000fffff: RESERVED
|
| 546 | 3. 0000000000100000-000000007f696fff: RAM
|
| 547 | 4. 000000007f697000-000000007f7fffff: CONFIGURATION TABLES
|
| 548 | 5. 000000007f800000-00000000821fffff: RESERVED
|
| 549 | 6. 00000000f0000000-00000000f3ffffff: RESERVED
|
| 550 | 7. 00000000fed10000-00000000fed19fff: RESERVED
|
| 551 | 8. 00000000fed84000-00000000fed84fff: RESERVED
|
| 552 | 9. 0000000100000000-000000027cdfffff: RAM
|
| 553 | Wrote coreboot table at: 7f697000, 0x19c bytes, checksum 5876
|
| 554 | coreboot table: 436 bytes.
|
| 555 | CBMEM ROOT 0. 7f7ff000 00001000
|
| 556 | CAR GLOBALS 1. 7f7fe000 00001000
|
| 557 | CONSOLE 2. 7f7de000 00020000
|
| 558 | MRC DATA 3. 7f7dd000 00001000
|
| 559 | ROMSTAGE 4. 7f7dc000 00001000
|
| 560 | ROMSTG STCK 5. 7f7d7000 00005000
|
| 561 | GDT 6. 7f7d6000 00001000
|
| 562 | ACPI GNVS 7. 7f7d5000 00001000
|
| 563 | SMM BACKUP 8. 7f7c5000 00010000
|
| 564 | ACPI 9. 7f7a1000 00024000
|
| 565 | GNVS PTR 10. 7f7a0000 00001000
|
| 566 | SMBIOS 11. 7f79f000 00001000
|
| 567 | ACPI RESUME12. 7f69f000 00100000
|
| 568 | COREBOOT 13. 7f697000 00008000
|
| 569 | BS: BS_WRITE_TABLES times (us): entry 4851 run 217 exit 3
|
| 570 | CBFS: located payload @ fff3f6f8, 46070 bytes.
|
| 571 | Loading segment from rom address 0xfff3f6f8
|
| 572 | code (compression=1)
|
| 573 | New segment dstaddr 0xea374 memsize 0x15c8c srcaddr 0xfff3f730 filesize 0xb3be
|
| 574 | (cleaned up) New segment addr 0xea374 size 0x15c8c offset 0xfff3f730 filesize 0xb3be
|
| 575 | Loading segment from rom address 0xfff3f714
|
| 576 | Entry Point 0x000fd439
|
| 577 | Payload being loaded below 1MiB without region being marked as RAM usable.
|
| 578 | Loading Segment: addr: 0x00000000000ea374 memsz: 0x0000000000015c8c filesz: 0x000000000000b3be
|
| 579 | Post relocation: addr: 0x00000000000ea374 memsz: 0x0000000000015c8c filesz: 0x000000000000b3be
|
| 580 | using LZMA
|
| 581 | dest 000ea374, end 00100000, bouncebuffer 7f600000
|
| 582 | BS: BS_PAYLOAD_LOAD times (us): entry 2 run 17437 exit 3
|
| 583 | PCH watchdog disabled
|
| 584 | Jumping to boot code at 000fd439
|
| 585 | SeaBIOS (version rel-1.7.5-82-g8dfa2cf-20141016-MattDevo) |
| 586 | Found coreboot cbmem console @ 7f7de000 |
| 587 | Found mainboard Google Panther |
| 588 | malloc preinit |
| 589 | Relocating init from 0x000eb3f0 to 0x7f64dda0 (size 37280) |
| 590 | malloc init |
| 591 | Found CBFS header at 0xfffff868 |
| 592 | Add romfile: cmos_layout.bin (size=1164) |
| 593 | Add romfile: pci8086,0406.rom (size=65536) |
| 594 | Add romfile: cpu_microcode_blob.bin (size=40960) |
| 595 | Add romfile: config (size=5027) |
| 596 | Add romfile: etc/boot-menu-wait (size=8) |
| 597 | Add romfile: etc/boot-menu-key (size=1) |
| 598 | Add romfile: etc/boot-menu-message (size=27) |
| 599 | Add romfile: links (size=558) |
| 600 | Add romfile: (size=17048) |
| 601 | Add romfile: fallback/romstage (size=37237) |
| 602 | Add romfile: fallback/ramstage (size=91343) |
| 603 | Add romfile: fallback/payload (size=46070) |
| 604 | Add romfile: (size=349336) |
| 605 | Add romfile: mrc.bin (size=191236) |
| 606 | Add romfile: (size=199896) |
| 607 | Copying data 558@0xfff1ba68 to 558@0x7f64ceb0 |
| 608 | Add romfile: pci8086,0402.rom (size=65536) |
| 609 | Add romfile: pci8086,0406.rom (size=65536) |
| 610 | Add romfile: pci8086,040a.rom (size=65536) |
| 611 | Add romfile: pci8086,0a06.rom (size=65536) |
| 612 | Add romfile: pci8086,0412.rom (size=65536) |
| 613 | Add romfile: pci8086,0416.rom (size=65536) |
| 614 | Add romfile: pci8086,041a.rom (size=65536) |
| 615 | Add romfile: pci8086,0a16.rom (size=65536) |
| 616 | Add romfile: pci8086,0422.rom (size=65536) |
| 617 | Add romfile: pci8086,0426.rom (size=65536) |
| 618 | Add romfile: pci8086,042a.rom (size=65536) |
| 619 | Add romfile: pci8086,0a26.rom (size=65536) |
| 620 | init ivt |
| 621 | init bda |
| 622 | init bios32 |
| 623 | init PMM |
| 624 | init PNPBIOS table |
| 625 | init keyboard |
| 626 | init pic |
| 627 | math cp init |
| 628 | CPU Mhz=1398 |
| 629 | init timer |
| 630 | PCI probe |
| 631 | Found 14 PCI devices (max PCI bus is 03) |
| 632 | Relocating coreboot bios tables |
| 633 | Copying SMBIOS entry point from 0x7f79f000 to 0x000f4570 |
| 634 | Copying ACPI RSDP from 0x7f7a1000 to 0x000f4540 |
| 635 | Using pmtimer, ioport 0x1008 |
| 636 | Scan for VGA option rom |
| 637 | Copying data 65536@0xfff004f8 to 65536@0x000c0000 |
| 638 | Running option rom at c000:0003 |
| 639 | Turning on vga text mode console |
| 640 | SeaBIOS (version rel-1.7.5-82-g8dfa2cf-20141016-MattDevo) |
| 641 | init usb |
| 642 | XHCI init on dev 00:14.0: regs @ 0xe0700000, 13 ports, 32 slots, 32 byte contexts |
| 643 | XHCI protocol USB 2.00, 8 ports (offset 1), def 3018 |
| 644 | XHCI protocol USB 3.00, 4 ports (offset 10), def 1000 |
| 645 | XHCI extcap 0xc1 @ e0708040 |
| 646 | XHCI extcap 0xc0 @ e0708070 |
| 647 | XHCI extcap 0x1 @ e0708460 |
| 648 | XHCI extcap 0xa @ e0708480 |
| 649 | configure_xhci: resetting |
| 650 | configure_xhci: setup 16 scratch pad buffers |
| 651 | xhci_hub_reset port #4: 0x000206e1, powered, pls 7, speed 1 [Full] |
| 652 | XHCI port #4: 0x00200603, powered, enabled, pls 0, speed 1 [Full] |
| 653 | set_address 0x7f696fb0 |
| 654 | xhci_alloc_pipe: usbdev 0x7f64c0f0, ring 0x7f696900, slotid 0, epid 1 |
| 655 | xhci_cmd_enable_slot: |
| 656 | xhci_process_events: status change port #4 |
| 657 | xhci_process_events: status change port #4 |
| 658 | xhci_alloc_pipe: enable slot: got slotid 1 |
| 659 | xhci_cmd_address_device: slotid 1 |
| 660 | xhci_update_pipe: usbdev 0x7f64c0f0, ring 0x7f696900, slotid 1, epid 1 |
| 661 | config_usb: 0x7f696a20 |
| 662 | device rev=0110 cls=e0 sub=01 proto=01 size=64 |
| 663 | xhci_update_pipe: usbdev 0x7f64c0f0, ring 0x7f696900, slotid 1, epid 1 |
| 664 | xhci_update_pipe: reconf ctl endpoint pkt size: 8 -> 64 |
| 665 | xhci_cmd_evaluate_context: slotid 1, add 0x2, del 0x0 |
| 666 | XHCI no devices found |
| 667 | init ahci |
| 668 | AHCI controller at 1f.2, iobase e0719000, irq 10 |
| 669 | AHCI: cap 0xdf34ff01, ports_impl 0x1 |
| 670 | AHCI/0: probing |
| 671 | AHCI/0: link up |
| 672 | AHCI/0: ... finished, status 0x51, ERROR 0x4 |
| 673 | Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0 |
| 674 | AHCI/0: registering: "AHCI/0: SC2 M2 SSD ATA-10 Hard-Disk (111 GiBytes)" |
| 675 | Registering bootable: AHCI/0: SC2 M2 SSD ATA-10 Hard-Disk (111 GiBytes) (type:2 prio:103 data:f44d0) |
| 676 | Scan for option roms |
| 677 | |
| 678 | Searching bootorder for: HALT |
| 679 | Mapping hd drive 0x000f44d0 to 0 |
| 680 | drive 0x000f44d0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=234441648 |
| 681 | finalize PMM |
| 682 | malloc finalize |
| 683 | Space available for UMB: d0000-ee800, f0000-f44d0 |
| 684 | Returned 192512 bytes of ZoneHigh |
| 685 | e820 map has 9 items: |
| 686 | 0: 0000000000000000 - 000000000009fc00 = 1 RAM |
| 687 | 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED |
| 688 | 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED |
| 689 | 3: 0000000000100000 - 000000007f686000 = 1 RAM |
| 690 | 4: 000000007f686000 - 0000000082200000 = 2 RESERVED |
| 691 | 5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED |
| 692 | 6: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED |
| 693 | 7: 00000000fed84000 - 00000000fed85000 = 2 RESERVED |
| 694 | 8: 0000000100000000 - 000000027ce00000 = 1 RAM |
| 695 | Jump to int19 |
| 696 | enter handle_19: |
| 697 | NULL |
| 698 | Booting from Hard Disk... |
| 699 | Booting from 0000:7c00 |
| 700 | |