blob: d038085a244ebf96bae08781c258ce7d35f05f1a [file] [log] [blame]
Paul Menzel1a3ff6a2015-10-20 09:03:05 +02001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 4.1.0-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-1) ) #1 SMP Debian 4.1.1-1~exp1 (2015-07-07)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7f9cfff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000c7f9d000-0x00000000dfffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.1-776-gd98471c 10/18/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000 mask F80000000 write-back
26[ 0.000000] 1 base 080000000 mask FC0000000 write-back
27[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 000000021f000000 aka 8688M
34[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
35[ 0.000000] found SMP MP-table at [mem 0x000f7280-0x000f728f] mapped at [c00f7280]
36[ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
37[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
38[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
39[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
40[ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
41[ 0.000000] [mem 0x37600000-0x377fffff] page 2M
42[ 0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
43[ 0.000000] [mem 0x20000000-0x375fffff] page 2M
44[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
45[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
46[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
47[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
48[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
49[ 0.000000] BRK [0x0182b000, 0x0182bfff] PGTABLE
50[ 0.000000] BRK [0x0182c000, 0x0182dfff] PGTABLE
51[ 0.000000] BRK [0x0182e000, 0x0182efff] PGTABLE
52[ 0.000000] BRK [0x0182f000, 0x0182ffff] PGTABLE
53[ 0.000000] RAMDISK: [mem 0x35f7a000-0x36fb4fff]
54[ 0.000000] ACPI: Early table checksum verification disabled
55[ 0.000000] ACPI: RSDP 0x00000000000F7480 000024 (v02 CORE )
56[ 0.000000] ACPI: XSDT 0x00000000C7FB80E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: FACP 0x00000000C7FBA740 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: DSDT 0x00000000C7FB8280 0024B3 (v02 ASROCK COREBOOT 00010001 INTL 20140926)
59[ 0.000000] ACPI: FACS 0x00000000C7FB8240 000040
60[ 0.000000] ACPI: SSDT 0x00000000C7FBA840 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
61[ 0.000000] ACPI: TCPA 0x00000000C7FBA890 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: APIC 0x00000000C7FBA8D0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: HEST 0x00000000C7FBA930 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: SSDT 0x00000000C7FBA960 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
65[ 0.000000] ACPI: SSDT 0x00000000C7FBBFF0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
66[ 0.000000] ACPI: HPET 0x00000000C7FBC3D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: Local APIC address 0xfee00000
68[ 0.000000] 7798MB HIGHMEM available.
69[ 0.000000] 889MB LOWMEM available.
70[ 0.000000] mapped low ram: 0 - 379fe000
71[ 0.000000] low ram: 0 - 379fe000
72[ 0.000000] Zone ranges:
73[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
74[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
75[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000021effffff]
76[ 0.000000] Movable zone start for each node
77[ 0.000000] Early memory node ranges
78[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
79[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c7f9cfff]
80[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
81[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
82[ 0.000000] On node 0 totalpages: 1994555
83[ 0.000000] free_area_init_node: node 0, pgdat c16debc0, node_mem_map f131e024
84[ 0.000000] DMA zone: 36 pages used for memmap
85[ 0.000000] DMA zone: 0 pages reserved
86[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
87[ 0.000000] Normal zone: 1967 pages used for memmap
88[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
89[ 0.000000] HighMem zone: 1766815 pages, LIFO batch:31
90[ 0.000000] Using APIC driver default
91[ 0.000000] ACPI: PM-Timer IO Port: 0x808
92[ 0.000000] ACPI: Local APIC address 0xfee00000
93[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
94[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
95[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
96[ 0.000000] ACPI: IRQ0 used by override.
97[ 0.000000] ACPI: IRQ9 used by override.
98[ 0.000000] Using ACPI (MADT) for SMP configuration information
99[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
100[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
101[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
102[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
103[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
104[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
105[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
106[ 0.000000] Booting paravirtualized kernel on bare hardware
107[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
108[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
109[ 0.000000] PERCPU: Embedded 19 pages/cpu @f79c6000 s45452 r0 d32372 u77824
110[ 0.000000] pcpu-alloc: s45452 r0 d32372 u77824 alloc=19*4096
111[ 0.000000] pcpu-alloc: [0] 0 [0] 1
112[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1992552
113[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.1.0-trunk-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0
114[ 0.000000] PCIe ASPM is forcibly enabled
115[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
116[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
117[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
118[ 0.000000] Initializing CPU#0
119[ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000)
120[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
121[ 0.000000] Memory: 7873940K/7978220K available (5004K kernel code, 625K rwdata, 1488K rodata, 676K init, 468K bss, 104280K reserved, 0K cma-reserved, 7067260K highmem)
122[ 0.000000] virtual kernel memory layout:
123 fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
124 pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
125 vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
126 lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
127 .init : 0xc16f7000 - 0xc17a0000 ( 676 kB)
128 .data : 0xc14e345a - 0xc16f54c0 (2120 kB)
129 .text : 0xc1000000 - 0xc14e345a (5005 kB)
130[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
131[ 0.000000] Hierarchical RCU implementation.
132[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
133[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
134[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
135[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
136[ 0.000000] CPU 0 irqstacks, hard=f742a000 soft=f742c000
137[ 0.000000] spurious 8259A interrupt: IRQ7.
138[ 0.000000] Console: colour VGA+ 80x25
139[ 0.000000] console [tty0] enabled
140[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
141[ 0.000000] hpet clockevent registered
142[ 0.000000] tsc: Fast TSC calibration using PIT
143[ 0.000000] tsc: Detected 1600.004 MHz processor
144[ 0.000058] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400016)
145[ 0.000065] pid_max: default: 32768 minimum: 301
146[ 0.000083] ACPI: Core revision 20150410
147[ 0.006097] ACPI: All ACPI Tables successfully acquired
148[ 0.006143] Security Framework initialized
149[ 0.006163] AppArmor: AppArmor disabled by boot time parameter
150[ 0.006167] Yama: disabled by default; enable with sysctl kernel.yama.*
151[ 0.006202] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
152[ 0.006207] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
153[ 0.006585] Initializing cgroup subsys blkio
154[ 0.006592] Initializing cgroup subsys memory
155[ 0.006602] Initializing cgroup subsys devices
156[ 0.006608] Initializing cgroup subsys freezer
157[ 0.006616] Initializing cgroup subsys net_cls
158[ 0.006622] Initializing cgroup subsys perf_event
159[ 0.006627] Initializing cgroup subsys net_prio
160[ 0.006666] CPU: Physical Processor ID: 0
161[ 0.006669] CPU: Processor Core ID: 0
162[ 0.006675] mce: CPU supports 6 MCE banks
163[ 0.006694] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
164[ 0.006698] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
165[ 0.007041] Freeing SMP alternatives memory: 24K (c17a0000 - c17a6000)
166[ 0.009443] ftrace: allocating 21713 entries in 43 pages
167[ 0.029175] Enabling APIC mode: Flat. Using 1 I/O APICs
168[ 0.029648] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
169[ 0.176442] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
170[ 0.176504] Performance Events: AMD PMU driver.
171[ 0.176514] ... version: 0
172[ 0.176517] ... bit width: 48
173[ 0.176520] ... generic registers: 4
174[ 0.176522] ... value mask: 0000ffffffffffff
175[ 0.176525] ... max period: 00007fffffffffff
176[ 0.176528] ... fixed-purpose events: 0
177[ 0.176530] ... event mask: 000000000000000f
178[ 0.177788] CPU 1 irqstacks, hard=f752e000 soft=f7530000
179[ 0.177794] x86: Booting SMP configuration:
180[ 0.177797] .... node #0, CPUs: #1
181[ 0.188801] Initializing CPU#1
182[ 0.191006] x86: Booted up 1 node, 2 CPUs
183[ 0.191013] smpboot: Total of 2 processors activated (6400.01 BogoMIPS)
184[ 0.191910] devtmpfs: initialized
185[ 0.192714] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
186[ 0.192909] pinctrl core: initialized pinctrl subsystem
187[ 0.193192] NET: Registered protocol family 16
188[ 0.203341] cpuidle: using governor ladder
189[ 0.212719] cpuidle: using governor menu
190[ 0.213097] ACPI: bus type PCI registered
191[ 0.213102] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
192[ 0.213511] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
193[ 0.213516] bios32_service(0x49435024): not present
194[ 0.213519] PCI: Using configuration type 1 for base access
195[ 0.213521] PCI: Using configuration type 1 for extended access
196[ 0.224728] ACPI: Added _OSI(Module Device)
197[ 0.224737] ACPI: Added _OSI(Processor Device)
198[ 0.224741] ACPI: Added _OSI(3.0 _SCP Extensions)
199[ 0.224745] ACPI: Added _OSI(Processor Aggregator Device)
200[ 0.227002] ACPI: Executed 2 blocks of module-level executable AML code
201[ 0.231482] ACPI: Interpreter enabled
202[ 0.231506] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
203[ 0.231532] ACPI: (supports S0 S1 S3 S4 S5)
204[ 0.231536] ACPI: Using IOAPIC for interrupt routing
205[ 0.231568] HEST: Table parsing has been initialized.
206[ 0.231576] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
207[ 0.238675] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
208[ 0.238689] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
209[ 0.238847] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
210[ 0.239377] PCI host bridge to bus 0000:00
211[ 0.239384] pci_bus 0000:00: root bus resource [bus 00-ff]
212[ 0.239390] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
213[ 0.239395] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
214[ 0.239400] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
215[ 0.239404] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
216[ 0.239420] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
217[ 0.239630] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
218[ 0.239650] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
219[ 0.239661] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
220[ 0.239673] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
221[ 0.239737] pci 0000:00:01.0: supports D1 D2
222[ 0.239827] pci 0000:00:01.0: System wakeup disabled by ACPI
223[ 0.239921] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
224[ 0.239938] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
225[ 0.240014] pci 0000:00:01.1: supports D1 D2
226[ 0.240101] pci 0000:00:01.1: System wakeup disabled by ACPI
227[ 0.240294] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
228[ 0.240319] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
229[ 0.240334] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
230[ 0.240349] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
231[ 0.240364] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
232[ 0.240379] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
233[ 0.240394] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
234[ 0.240680] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
235[ 0.240702] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
236[ 0.240865] pci 0000:00:12.0: System wakeup disabled by ACPI
237[ 0.241028] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
238[ 0.241053] pci 0000:00:12.2: reg 0x10: [mem 0xf014b400-0xf014b4ff]
239[ 0.241158] pci 0000:00:12.2: supports D1 D2
240[ 0.241163] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
241[ 0.241255] pci 0000:00:12.2: System wakeup disabled by ACPI
242[ 0.241390] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
243[ 0.241411] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
244[ 0.241573] pci 0000:00:13.0: System wakeup disabled by ACPI
245[ 0.241739] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
246[ 0.241764] pci 0000:00:13.2: reg 0x10: [mem 0xf014b500-0xf014b5ff]
247[ 0.241869] pci 0000:00:13.2: supports D1 D2
248[ 0.241874] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
249[ 0.241964] pci 0000:00:13.2: System wakeup disabled by ACPI
250[ 0.242129] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
251[ 0.242414] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
252[ 0.242444] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
253[ 0.242534] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
254[ 0.242774] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
255[ 0.243088] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
256[ 0.243225] pci 0000:00:14.4: System wakeup disabled by ACPI
257[ 0.243376] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
258[ 0.243397] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
259[ 0.243562] pci 0000:00:14.5: System wakeup disabled by ACPI
260[ 0.243723] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
261[ 0.243814] pci 0000:00:15.0: supports D1 D2
262[ 0.243907] pci 0000:00:15.0: System wakeup disabled by ACPI
263[ 0.244067] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
264[ 0.244165] pci 0000:00:15.1: supports D1 D2
265[ 0.244258] pci 0000:00:15.1: System wakeup disabled by ACPI
266[ 0.244393] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
267[ 0.244586] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
268[ 0.244762] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
269[ 0.244940] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
270[ 0.245137] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
271[ 0.245314] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
272[ 0.245491] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
273[ 0.245665] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
274[ 0.246104] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
275[ 0.246120] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
276[ 0.246124] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
277[ 0.246129] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
278[ 0.246134] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
279[ 0.246223] pci 0000:00:15.0: PCI bridge to [bus 02]
280[ 0.246393] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
281[ 0.246423] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
282[ 0.246464] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
283[ 0.246491] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
284[ 0.246606] pci 0000:03:00.0: supports D1 D2
285[ 0.246611] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.252756] pci 0000:00:15.1: PCI bridge to [bus 03]
287[ 0.252774] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
288[ 0.252789] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
289[ 0.252832] pci_bus 0000:00: on NUMA node 0
290[ 0.253849] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
291[ 0.254092] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
292[ 0.254267] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
293[ 0.254365] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
294[ 0.254463] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
295[ 0.254636] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
296[ 0.254729] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
297[ 0.254825] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
298[ 0.255089] ACPI: Enabled 6 GPEs in block 00 to 1F
299[ 0.255573] vgaarb: setting as boot device: PCI:0000:00:01.0
300[ 0.255583] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
301[ 0.255595] vgaarb: loaded
302[ 0.255599] vgaarb: bridge control possible 0000:00:01.0
303[ 0.255942] PCI: Using ACPI for IRQ routing
304[ 0.255954] PCI: pci_cache_line_size set to 64 bytes
305[ 0.256116] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
306[ 0.256122] e820: reserve RAM buffer [mem 0xc7f9d000-0xc7ffffff]
307[ 0.256126] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
308[ 0.256598] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
309[ 0.256607] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
310[ 0.258770] Switched to clocksource hpet
311[ 0.272243] pnp: PnP ACPI init
312[ 0.272673] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
313[ 0.272963] pnp: PnP ACPI: found 1 devices
314[ 0.272971] PnPBIOS: Disabled by ACPI PNP
315[ 0.317053] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
316[ 0.317119] pci 0000:00:14.4: PCI bridge to [bus 01]
317[ 0.317140] pci 0000:00:15.0: PCI bridge to [bus 02]
318[ 0.317158] pci 0000:00:15.1: PCI bridge to [bus 03]
319[ 0.317164] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
320[ 0.317177] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
321[ 0.317190] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
322[ 0.317194] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
323[ 0.317199] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
324[ 0.317204] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
325[ 0.317209] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
326[ 0.317213] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
327[ 0.317217] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
328[ 0.317222] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
329[ 0.317226] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
330[ 0.317231] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
331[ 0.317405] NET: Registered protocol family 2
332[ 0.317852] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
333[ 0.317892] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
334[ 0.317942] TCP: Hash tables configured (established 8192 bind 8192)
335[ 0.317992] UDP hash table entries: 512 (order: 2, 16384 bytes)
336[ 0.318006] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
337[ 0.318276] NET: Registered protocol family 1
338[ 0.318313] pci 0000:00:01.0: Video device with shadowed ROM
339[ 0.376209] PCI: CLS 64 bytes, default 64
340[ 0.376340] Unpacking initramfs...
341[ 1.032052] Freeing initrd memory: 16620K (f5f7a000 - f6fb5000)
342[ 1.032648] microcode: CPU0: patch_level=0x05000119
343[ 1.032774] microcode: CPU1: patch_level=0x05000119
344[ 1.033118] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
345[ 1.033140] LVT offset 0 assigned for vector 0x400
346[ 1.033270] perf: AMD IBS detected (0x000000ff)
347[ 1.034304] futex hash table entries: 512 (order: 3, 32768 bytes)
348[ 1.034430] audit: initializing netlink subsys (disabled)
349[ 1.034468] audit: type=2000 audit(1445323154.920:1): initialized
350[ 1.035427] HugeTLB registered 2 MB page size, pre-allocated 0 pages
351[ 1.035470] zpool: loaded
352[ 1.035765] VFS: Disk quotas dquot_6.6.0
353[ 1.035880] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
354[ 1.037647] alg: No test for stdrng (krng)
355[ 1.037703] bounce: pool size: 64 pages
356[ 1.037830] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
357[ 1.037899] io scheduler noop registered
358[ 1.037905] io scheduler deadline registered
359[ 1.037925] io scheduler cfq registered (default)
360[ 1.039338] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
361[ 1.039348] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
362[ 1.039383] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
363[ 1.039388] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
364[ 1.039395] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
365[ 1.039411] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
366[ 1.039450] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
367[ 1.039567] GHES: Failed to enable APEI firmware first mode.
368[ 1.039578] isapnp: ISA Plug & Play support disabled
369[ 1.039848] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
370[ 1.060565] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
371[ 1.062366] Linux agpgart interface v0.103
372[ 1.063181] i8042: PNP: No PS/2 controller found. Probing ports directly.
373[ 1.066958] serio: i8042 KBD port at 0x60,0x64 irq 1
374[ 1.066980] serio: i8042 AUX port at 0x60,0x64 irq 12
375[ 1.067861] mousedev: PS/2 mouse device common for all mice
376[ 1.068087] rtc_cmos 00:00: RTC can wake from S4
377[ 1.068485] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
378[ 1.068526] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
379[ 1.068560] ledtrig-cpu: registered to indicate activity on CPUs
380[ 1.069076] NET: Registered protocol family 10
381[ 1.069615] mip6: Mobile IPv6
382[ 1.069631] NET: Registered protocol family 17
383[ 1.069643] mpls_gso: MPLS GSO support
384[ 1.070215] Using IPI No-Shortcut mode
385[ 1.070906] registered taskstats version 1
386[ 1.071680] rtc_cmos 00:00: setting system clock to 2015-10-20 06:39:15 UTC (1445323155)
387[ 1.071780] PM: Hibernation image not present or could not be loaded.
388[ 1.072350] Freeing unused kernel memory: 676K (c16f7000 - c17a0000)
389[ 1.072550] Write protecting the kernel text: 5008k
390[ 1.072690] Write protecting the kernel read-only data: 1492k
391[ 1.072693] NX-protecting the kernel data: 3184k
392[ 1.167900] systemd-udevd[66]: starting version 215
393[ 1.168682] random: systemd-udevd urandom read with 0 bits of entropy available
394[ 1.188619] ACPI: bus type USB registered
395[ 1.188685] usbcore: registered new interface driver usbfs
396[ 1.188712] usbcore: registered new interface driver hub
397[ 1.194471] SCSI subsystem initialized
398[ 1.196653] usbcore: registered new device driver usb
399[ 1.197816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
400[ 1.198187] ehci-pci: EHCI PCI platform driver
401[ 1.198604] QUIRK: Enable AMD PLL fix
402[ 1.198656] ehci-pci 0000:00:12.2: EHCI Host Controller
403[ 1.198679] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
404[ 1.198694] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
405[ 1.198817] ehci-pci 0000:00:12.2: debug port 1
406[ 1.198890] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014b400
407[ 1.201703] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
408[ 1.203551] libata version 3.00 loaded.
409[ 1.211318] thermal LNXTHERM:00: registered as thermal_zone0
410[ 1.211327] ACPI: Thermal Zone [TZ00] (37 C)
411[ 1.211658] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
412[ 1.211817] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
413[ 1.211823] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
414[ 1.211827] usb usb1: Product: EHCI Host Controller
415[ 1.211831] usb usb1: Manufacturer: Linux 4.1.0-trunk-686-pae ehci_hcd
416[ 1.211835] usb usb1: SerialNumber: 0000:00:12.2
417[ 1.212133] hub 1-0:1.0: USB hub found
418[ 1.212153] hub 1-0:1.0: 5 ports detected
419[ 1.212791] ehci-pci 0000:00:13.2: EHCI Host Controller
420[ 1.212805] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
421[ 1.212815] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
422[ 1.212830] ehci-pci 0000:00:13.2: debug port 1
423[ 1.212885] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014b500
424[ 1.221674] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
425[ 1.222725] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf822c000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26
426[ 1.222732] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
427[ 1.222995] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
428[ 1.223176] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
429[ 1.223182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
430[ 1.223186] usb usb2: Product: EHCI Host Controller
431[ 1.223190] usb usb2: Manufacturer: Linux 4.1.0-trunk-686-pae ehci_hcd
432[ 1.223194] usb usb2: SerialNumber: 0000:00:13.2
433[ 1.223781] hub 2-0:1.0: USB hub found
434[ 1.223801] hub 2-0:1.0: 5 ports detected
435[ 1.224301] ahci 0000:00:11.0: version 3.0
436[ 1.224773] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
437[ 1.224780] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
438[ 1.227412] ohci-pci: OHCI PCI platform driver
439[ 1.228165] scsi host0: ahci
440[ 1.233876] scsi host1: ahci
441[ 1.238976] scsi host2: ahci
442[ 1.239930] scsi host3: ahci
443[ 1.240194] scsi host4: ahci
444[ 1.240404] scsi host5: ahci
445[ 1.240599] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
446[ 1.240605] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
447[ 1.240610] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
448[ 1.240615] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
449[ 1.240620] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
450[ 1.240624] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
451[ 1.241035] ohci-pci 0000:00:12.0: OHCI PCI host controller
452[ 1.241055] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
453[ 1.241191] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
454[ 1.299307] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
455[ 1.299316] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
456[ 1.299321] usb usb3: Product: OHCI PCI host controller
457[ 1.299325] usb usb3: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
458[ 1.299329] usb usb3: SerialNumber: 0000:00:12.0
459[ 1.299948] hub 3-0:1.0: USB hub found
460[ 1.299975] hub 3-0:1.0: 5 ports detected
461[ 1.300655] ohci-pci 0000:00:13.0: OHCI PCI host controller
462[ 1.300668] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
463[ 1.300718] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
464[ 1.359308] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
465[ 1.359319] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
466[ 1.359324] usb usb4: Product: OHCI PCI host controller
467[ 1.359328] usb usb4: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
468[ 1.359332] usb usb4: SerialNumber: 0000:00:13.0
469[ 1.359990] hub 4-0:1.0: USB hub found
470[ 1.360017] hub 4-0:1.0: 5 ports detected
471[ 1.360701] ohci-pci 0000:00:14.5: OHCI PCI host controller
472[ 1.360715] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
473[ 1.360772] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
474[ 1.419220] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
475[ 1.419231] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
476[ 1.419235] usb usb5: Product: OHCI PCI host controller
477[ 1.419240] usb usb5: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
478[ 1.419244] usb usb5: SerialNumber: 0000:00:14.5
479[ 1.419856] hub 5-0:1.0: USB hub found
480[ 1.419882] hub 5-0:1.0: 2 ports detected
481[ 1.535188] usb 2-1: new high-speed USB device number 2 using ehci-pci
482[ 1.559171] ata1: SATA link down (SStatus 0 SControl 300)
483[ 1.559227] ata2: SATA link down (SStatus 0 SControl 300)
484[ 1.559270] ata5: SATA link down (SStatus 0 SControl 300)
485[ 1.559320] ata3: SATA link down (SStatus 0 SControl 300)
486[ 1.559350] ata6: SATA link down (SStatus 0 SControl 300)
487[ 1.670124] usb 2-1: New USB device found, idVendor=0bda, idProduct=8172
488[ 1.670141] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
489[ 1.670150] usb 2-1: Product: RTL8191S WLAN Adapter
490[ 1.670158] usb 2-1: Manufacturer: Manufacturer Realtek
491[ 1.670166] usb 2-1: SerialNumber: 00e04c000001
492[ 1.727107] usb 3-2: new low-speed USB device number 2 using ohci-pci
493[ 1.731141] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
494[ 1.731885] ata4.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
495[ 1.731895] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
496[ 1.732309] ata4.00: configured for UDMA/100
497[ 1.732779] scsi 3:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
498[ 1.741012] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
499[ 1.741163] sd 3:0:0:0: [sda] Write Protect is off
500[ 1.741169] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
501[ 1.741216] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
502[ 1.746973] sda: sda1 sda2
503[ 1.747749] sd 3:0:0:0: [sda] Attached SCSI disk
504[ 1.748793] sd 3:0:0:0: Attached scsi generic sg0 type 0
505[ 1.892308] usb 3-2: New USB device found, idVendor=1241, idProduct=1122
506[ 1.892324] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
507[ 1.897804] hidraw: raw HID events driver (C) Jiri Kosina
508[ 1.905715] usbcore: registered new interface driver usbhid
509[ 1.905723] usbhid: USB HID core driver
510[ 1.907560] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input2
511[ 1.907746] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
512[ 1.931704] device-mapper: uevent: version 1.0.3
513[ 1.931888] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
514[ 1.991113] usb 4-2: new low-speed USB device number 2 using ohci-pci
515[ 2.031081] tsc: Refined TSC clocksource calibration: 1599.999 MHz
516[ 2.031094] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns
517[ 2.163279] usb 4-2: New USB device found, idVendor=046d, idProduct=c312
518[ 2.163296] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
519[ 2.163305] usb 4-2: Product: USB Multimedia Keyboard
520[ 2.163313] usb 4-2: Manufacturer: LITEON Technology
521[ 2.172075] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/0003:046D:C312.0002/input/input3
522[ 2.227467] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0
523[ 3.031432] Switched to clocksource tsc
524[ 9.023066] NET: Registered protocol family 38
525[ 9.378730] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
526[ 10.045430] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
527[ 10.045568] systemd[1]: Found ordering cycle on basic.target/start
528[ 10.045576] systemd[1]: Found dependency on sysinit.target/start
529[ 10.045584] systemd[1]: Found dependency on rpcbind.service/start
530[ 10.045592] systemd[1]: Found dependency on network-online.target/start
531[ 10.045599] systemd[1]: Found dependency on network.target/start
532[ 10.045605] systemd[1]: Found dependency on systemd-networkd.service/start
533[ 10.045611] systemd[1]: Found dependency on dbus.service/start
534[ 10.045617] systemd[1]: Found dependency on basic.target/start
535[ 10.045624] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
536[ 10.045631] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
537[ 10.349816] random: nonblocking pool is initialized
538[ 11.213484] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
539[ 11.338110] lp: driver loaded but no devices found
540[ 11.356078] ppdev: user-space parallel port driver
541[ 11.359272] parport0: PC-style at 0x378 [PCSPP,EPP]
542[ 11.359289] parport0: irq 0 detected
543[ 11.448361] systemd-udevd[248]: starting version 215
544[ 11.455338] lp0: using parport0 (polling).
545[ 11.474451] fuse init (API version 7.23)
546[ 11.490632] w83627ehf: Found NCT6775F chip at 0x290
547[ 11.732650] ACPI: acpi_idle registered with cpuidle
548[ 11.742608] acpi-cpufreq: overriding BIOS provided _PSD data
549[ 11.786345] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
550[ 11.786359] ACPI: Power Button [PWRB]
551[ 11.786477] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
552[ 11.786483] ACPI: Power Button [PWRF]
553[ 11.787886] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
554[ 11.788057] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
555[ 11.794386] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
556[ 11.794515] sp5100_tco: PCI Revision ID: 0x42
557[ 11.794630] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
558[ 11.794644] sp5100_tco: Last reboot was not triggered by watchdog.
559[ 11.795573] sp5100_tco: initialized (0xf836eb00). heartbeat=60 sec (nowayout=0)
560[ 11.841026] [drm] Initialized drm 1.1.0 20060810
561[ 11.880603] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
562[ 11.991065] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
563[ 12.002952] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
564[ 12.003656] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
565[ 12.003662] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
566[ 12.003667] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
567[ 12.003672] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
568[ 12.003676] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
569[ 12.003680] snd_hda_codec_realtek hdaudioC1D0: inputs:
570[ 12.003686] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
571[ 12.003691] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
572[ 12.003695] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
573[ 12.003700] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
574[ 12.108155] [drm] radeon kernel modesetting enabled.
575[ 12.131040] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
576[ 12.131089] [drm] register mmio base: 0xF0100000
577[ 12.131092] [drm] register mmio size: 262144
578[ 12.131245] ATOM BIOS: AMD
579[ 12.149027] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
580[ 12.149040] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
581[ 12.149045] [drm] Detected VRAM RAM=384M, BAR=256M
582[ 12.149049] [drm] RAM width 32bits DDR
583[ 12.159311] [TTM] Zone kernel: Available graphics memory: 412000 kiB
584[ 12.159320] [TTM] Zone highmem: Available graphics memory: 3945630 kiB
585[ 12.159324] [TTM] Initializing pool allocator
586[ 12.159340] [TTM] Initializing DMA pool allocator
587[ 12.159394] [drm] radeon: 384M of VRAM memory ready
588[ 12.159398] [drm] radeon: 1024M of GTT memory ready.
589[ 12.159430] [drm] Loading PALM Microcode
590[ 12.165932] kvm: Nested Virtualization enabled
591[ 12.165943] kvm: Nested Paging enabled
592[ 12.187086] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
593[ 12.191764] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
594[ 12.210166] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
595[ 12.210907] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
596[ 12.210991] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
597[ 12.211075] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
598[ 12.211159] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
599[ 12.211239] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
600[ 12.211322] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
601[ 12.211405] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
602[ 12.211486] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
603[ 12.234383] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
604[ 12.234406] [drm] Internal thermal controller without fan control
605[ 12.234518] [drm] Found smc ucode version: 0x00010601
606[ 12.234610] [drm] radeon: dpm initialized
607[ 12.263748] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
608[ 12.263850] [drm] GART: num cpu pages 262144, num gpu pages 262144
609[ 12.275458] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
610[ 12.282925] radeon 0000:00:01.0: WB enabled
611[ 12.282939] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffac3c00
612[ 12.282945] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffac3c0c
613[ 12.284967] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8c32118
614[ 12.284973] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
615[ 12.284976] [drm] Driver supports precise vblank timestamp query.
616[ 12.284980] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
617[ 12.285036] radeon 0000:00:01.0: radeon: using MSI.
618[ 12.285076] [drm] radeon: irq initialized.
619[ 12.350748] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
620[ 12.351676] r8169 0000:03:00.0 eth10: renamed from eth0
621[ 12.352520] r8712u: register rtl8712_netdev_ops to netdev_ops
622[ 12.352534] usb 2-1: r8712u: USB_SPEED_HIGH with 4 endpoints
623[ 12.352791] [drm] ring test on 0 succeeded in 1 usecs
624[ 12.352803] [drm] ring test on 3 succeeded in 3 usecs
625[ 12.354379] usb 2-1: r8712u: Boot from EFUSE: Autoload OK
626[ 12.379079] systemd-udevd[284]: renamed network interface eth0 to eth10
627[ 12.420865] [drm] ring test on 5 succeeded in 0 usecs
628[ 12.434134] [drm] UVD initialized successfully.
629[ 12.443146] [drm] ib test on ring 0 succeeded in 0 usecs
630[ 12.446924] [drm] ib test on ring 3 succeeded in 0 usecs
631[ 12.479719] [drm] ib test on ring 5 succeeded
632[ 12.483780] [drm] Radeon Display Connectors
633[ 12.483786] [drm] Connector 0:
634[ 12.483789] [drm] HDMI-A-1
635[ 12.483791] [drm] HPD1
636[ 12.483796] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
637[ 12.483799] [drm] Encoders:
638[ 12.483802] [drm] DFP1: INTERNAL_UNIPHY
639[ 12.483804] [drm] Connector 1:
640[ 12.483807] [drm] HDMI-A-2
641[ 12.483809] [drm] HPD2
642[ 12.483812] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
643[ 12.483815] [drm] Encoders:
644[ 12.483817] [drm] DFP2: INTERNAL_UNIPHY
645[ 12.483819] [drm] Connector 2:
646[ 12.483821] [drm] VGA-1
647[ 12.483825] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
648[ 12.483827] [drm] Encoders:
649[ 12.483830] [drm] CRT1: INTERNAL_KLDSCP_DAC1
650[ 12.548818] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
651[ 12.596754] [drm] fb mappable at 0xE0478000
652[ 12.596765] [drm] vram apper at 0xE0000000
653[ 12.596768] [drm] size 5242880
654[ 12.596771] [drm] fb depth is 24
655[ 12.596774] [drm] pitch is 5120
656[ 12.597067] fbcon: radeondrmfb (fb0) is primary device
657[ 12.650427] Console: switching to colour frame buffer device 160x64
658[ 12.661527] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
659[ 12.661532] radeon 0000:00:01.0: registered panic notifier
660[ 12.671183] [drm] Initialized radeon 2.42.0 20080528 for 0000:00:01.0 on minor 0
661[ 12.966475] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
662[ 13.044819] systemd-journald[237]: Received request to flush runtime journal from PID 1
663[ 13.289327] usb 2-1: r8712u: CustomerID = 0x000a
664[ 13.289342] usb 2-1: r8712u: MAC Address from efuse = 24:05:0f:36:2a:d8
665[ 13.289349] usb 2-1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
666[ 13.289452] usbcore: registered new interface driver r8712u
667[ 13.296061] usb 2-1: firmware: direct-loading firmware rtlwifi/rtl8712u.bin
668[ 13.304949] r8712u 2-1:1.0 wlan6: renamed from wlan0
669[ 13.319141] systemd-udevd[277]: renamed network interface wlan0 to wlan6
670[ 14.478541] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
671[ 14.625188] r8169 0000:03:00.0 eth10: link down
672[ 14.637616] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
673[ 35.804167] r8712u 2-1:1.0 wlan6: 1 RCR=0x153f00e
674[ 35.805158] r8712u 2-1:1.0 wlan6: 2 RCR=0x553f00e
675[ 35.915796] IPv6: ADDRCONF(NETDEV_UP): wlan6: link is not ready
676[ 46.438010] IPv6: ADDRCONF(NETDEV_CHANGE): wlan6: link becomes ready