blob: 145d82648be19841d21a1056d8b3b817013c3e18 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +02001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 3.8.3-gnusam (sam@judas) (gcc version 4.7.2 (Debian 4.7.2-5) ) #20 SMP PREEMPT Fri Mar 15 10:48:05 MDT 2013
4[ 0.000000] Disabled fast string operations
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf6bffff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000bf6c0000-0x00000000bfffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
12[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
13[ 0.000000] SMBIOS 2.7 present.
14[ 0.000000] DMI: LENOVO ThinkPad T60 / T60p, BIOS t60 12/15/2013
15[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
16[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
17[ 0.000000] e820: last_pfn = 0xbf6c0 max_arch_pfn = 0x100000
18[ 0.000000] MTRR default type: write-back
19[ 0.000000] MTRR fixed ranges enabled:
20[ 0.000000] 00000-9FFFF write-back
21[ 0.000000] A0000-BFFFF uncachable
22[ 0.000000] C0000-FFFFF write-back
23[ 0.000000] MTRR variable ranges enabled:
24[ 0.000000] 0 base 0BF800000 mask 0FF800000 uncachable
25[ 0.000000] 1 base 0C0000000 mask 0C0000000 uncachable
26[ 0.000000] 2 disabled
27[ 0.000000] 3 disabled
28[ 0.000000] 4 disabled
29[ 0.000000] 5 disabled
30[ 0.000000] 6 disabled
31[ 0.000000] 7 disabled
32[ 0.000000] PAT not supported by CPU.
33[ 0.000000] found SMP MP-table at [mem 0x000fda30-0x000fda3f] mapped at [c00fda30]
34[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
35[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
37[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
38[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
39[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
40[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
41[ 0.000000] ACPI: RSDP 000fda00 00024 (v02 CORE )
42[ 0.000000] ACPI: XSDT bf6d28e0 0004C (v01 CORE COREBOOT 00000000 CORE 00000000)
43[ 0.000000] ACPI: HPET bf6d2a10 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
44[ 0.000000] ACPI: APIC bf6d2a50 00068 (v01 CORE COREBOOT 00000000 CORE 00000000)
45[ 0.000000] ACPI: MCFG bf6d2ac0 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
46[ 0.000000] ACPI: FACP bf6d5d30 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
47[ 0.000000] ACPI: DSDT bf6d2b40 030EF (v03 COREv4 COREBOOT 20090419 INTL 20100528)
48[ 0.000000] ACPI: FACS bf6d2b00 00040
49[ 0.000000] ACPI: SSDT bf6d5e30 00340 (v02 CORE COREBOOT 0000002A CORE 0000002A)
50[ 0.000000] ACPI: Local APIC address 0xfee00000
51[ 0.000000] 2174MB HIGHMEM available.
52[ 0.000000] 887MB LOWMEM available.
53[ 0.000000] mapped low ram: 0 - 377fe000
54[ 0.000000] low ram: 0 - 377fe000
55[ 0.000000] Zone ranges:
56[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
57[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
58[ 0.000000] HighMem [mem 0x377fe000-0xbf6bffff]
59[ 0.000000] Movable zone start for each node
60[ 0.000000] Early memory node ranges
61[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
62[ 0.000000] node 0: [mem 0x00100000-0xbf6bffff]
63[ 0.000000] On node 0 totalpages: 783951
64[ 0.000000] DMA zone: 32 pages used for memmap
65[ 0.000000] DMA zone: 0 pages reserved
66[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
67[ 0.000000] Normal zone: 1744 pages used for memmap
68[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
69[ 0.000000] HighMem zone: 4350 pages used for memmap
70[ 0.000000] HighMem zone: 552388 pages, LIFO batch:31
71[ 0.000000] Using APIC driver default
72[ 0.000000] ACPI: PM-Timer IO Port: 0x508
73[ 0.000000] ACPI: Local APIC address 0xfee00000
74[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
75[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
76[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
77[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
78[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
79[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
80[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
81[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
82[ 0.000000] ACPI: IRQ0 used by override.
83[ 0.000000] ACPI: IRQ2 used by override.
84[ 0.000000] ACPI: IRQ9 used by override.
85[ 0.000000] Using ACPI (MADT) for SMP configuration information
86[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
87[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
88[ 0.000000] nr_irqs_gsi: 40
89[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
90[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
91[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
92[ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
93[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
94[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5fd1000 s30464 r0 d22784 u53248
95[ 0.000000] pcpu-alloc: s30464 r0 d22784 u53248 alloc=13*4096
96[ 0.000000] pcpu-alloc: [0] 0 [0] 1
97[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777825
98[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.3-gnusam root=/dev/sda1 ro console=tty0 console=ttyS0,115200n processor.max_cstate=2
99[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
100[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
101[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
102[ 0.000000] __ex_table already sorted, skipping sort
103[ 0.000000] Initializing CPU#0
104[ 0.000000] Initializing HighMem for node 0 (000377fe:000bf6c0)
105[ 0.000000] Memory: 3103588k/3136256k available (3318k kernel code, 32216k reserved, 1525k data, 368k init, 2226952k highmem)
106[ 0.000000] virtual kernel memory layout:
107[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
108[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
109[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
110[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
111[ 0.000000] .init : 0xc14bb000 - 0xc1517000 ( 368 kB)
112[ 0.000000] .data : 0xc133d86b - 0xc14bafc0 (1525 kB)
113[ 0.000000] .text : 0xc1000000 - 0xc133d86b (3318 kB)
114[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
115[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
116[ 0.000000] Preemptible hierarchical RCU implementation.
117[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
118[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
119[ 0.000000] Extended CMOS year: 2000
120[ 0.000000] Console: colour VGA+ 80x25
121[ 0.000000] console [tty0] enabled
122[ 0.000000] console [ttyS0] enabled
123[ 0.000000] hpet clockevent registered
124[ 0.000000] tsc: Fast TSC calibration using PIT
125[ 0.000000] tsc: Detected 1994.919 MHz processor
126[ 0.002001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.83 BogoMIPS (lpj=1994919)
127[ 0.004004] pid_max: default: 32768 minimum: 301
128[ 0.005034] Security Framework initialized
129[ 0.006007] SELinux: Disabled at boot.
130[ 0.007012] Mount-cache hash table entries: 512
131[ 0.009103] Initializing cgroup subsys cpuacct
132[ 0.010004] Initializing cgroup subsys devices
133[ 0.011004] Initializing cgroup subsys freezer
134[ 0.012004] Initializing cgroup subsys net_cls
135[ 0.013004] Initializing cgroup subsys perf_event
136[ 0.014030] Disabled fast string operations
137[ 0.015007] CPU: Physical Processor ID: 0
138[ 0.016003] CPU: Processor Core ID: 0
139[ 0.017004] mce: CPU supports 6 MCE banks
140[ 0.018011] CPU0: Thermal monitoring enabled (TM2)
141[ 0.019005] process: using mwait in idle threads
142[ 0.020013] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
143[ 0.020013] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
144[ 0.020013] tlb_flushall_shift: 6
145[ 0.021072] Freeing SMP alternatives: 12k freed
146[ 0.022009] ACPI: Core revision 20121018
147[ 0.026113] Enabling APIC mode: Flat. Using 1 I/O APICs
148[ 0.028320] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
149[ 0.039397] smpboot: CPU0: Intel(R) Core(TM) Duo CPU T2500 @ 2.00GHz (fam: 06, model: 0e, stepping: 0c)
150[ 0.044000] Performance Events: Core events, core PMU driver.
151[ 0.046003] ... version: 1
152[ 0.047002] ... bit width: 40
153[ 0.048001] ... generic registers: 2
154[ 0.049002] ... value mask: 000000ffffffffff
155[ 0.050001] ... max period: 000000007fffffff
156[ 0.051001] ... fixed-purpose events: 0
157[ 0.052002] ... event mask: 0000000000000003
158[ 0.061061] CPU 1 irqstacks, hard=f588a000 soft=f588c000
159[ 0.061063] smpboot: Booting Node 0, Processors #1 OK
160[ 0.003000] Initializing CPU#1
161[ 0.003000] Disabled fast string operations
162[ 0.082044] Brought up 2 CPUs
163[ 0.083004] smpboot: Total of 2 processors activated (7979.67 BogoMIPS)
164[ 0.086074] devtmpfs: initialized
165[ 0.088034] regulator-dummy: no parameters
166[ 0.092074] NET: Registered protocol family 16
167[ 0.096179] ACPI: bus type pci registered
168[ 0.101047] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
169[ 0.110004] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
170[ 0.117002] PCI: Using MMCONFIG for extended config space
171[ 0.122002] PCI: Using configuration type 1 for base access
172[ 0.129124] bio: create slab <bio-0> at 0
173[ 0.133041] ACPI: Added _OSI(Module Device)
174[ 0.137003] ACPI: Added _OSI(Processor Device)
175[ 0.142008] ACPI: Added _OSI(3.0 _SCP Extensions)
176[ 0.146003] ACPI: Added _OSI(Processor Aggregator Device)
177[ 0.153462] ACPI: EC: Look up EC in DSDT
178[ 0.155500] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
179[ 0.161366] ACPI: Interpreter enabled
180[ 0.165007] ACPI: (supports S0 S3 S4 S5)
181[ 0.169661] ACPI: Using IOAPIC for interrupt routing
182[ 0.180484] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
183[ 0.181285] ACPI: ACPI Dock Station Driver: 1 docks/bays found
184[ 0.182006] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
185[ 0.183068] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
186[ 0.184004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
187[ 0.184172] pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
188[ 0.185054] pci_root PNP0A08:00: ACPI _OSC control (0x1d) granted
189[ 0.186110] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
190[ 0.187031] PCI host bridge to bus 0000:00
191[ 0.188004] pci_bus 0000:00: root bus resource [bus 00-ff]
192[ 0.189003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
193[ 0.190003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
194[ 0.191003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
195[ 0.192003] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
196[ 0.193003] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
197[ 0.194003] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
198[ 0.195003] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
199[ 0.196003] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
200[ 0.197003] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
201[ 0.198003] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
202[ 0.199003] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
203[ 0.200003] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
204[ 0.201003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
205[ 0.202003] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
206[ 0.203003] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
207[ 0.204003] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
208[ 0.205003] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
209[ 0.206003] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
210[ 0.207015] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
211[ 0.207068] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
212[ 0.207081] pci 0000:00:02.0: reg 10: [mem 0xe4200000-0xe427ffff]
213[ 0.207089] pci 0000:00:02.0: reg 14: [io 0x50a0-0x50a7]
214[ 0.207096] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
215[ 0.207104] pci 0000:00:02.0: reg 1c: [mem 0xe4300000-0xe433ffff]
216[ 0.207148] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
217[ 0.207159] pci 0000:00:02.1: reg 10: [mem 0xe4280000-0xe42fffff]
218[ 0.207264] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
219[ 0.207287] pci 0000:00:1b.0: reg 10: [mem 0xe4340000-0xe4343fff 64bit]
220[ 0.207389] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
221[ 0.207423] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
222[ 0.207530] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
223[ 0.207566] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
224[ 0.207672] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
225[ 0.207708] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
226[ 0.207814] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
227[ 0.207850] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
228[ 0.208044] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
229[ 0.208081] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
230[ 0.208136] pci 0000:00:1d.0: reg 20: [io 0x5000-0x501f]
231[ 0.208179] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
232[ 0.208234] pci 0000:00:1d.1: reg 20: [io 0x5020-0x503f]
233[ 0.208277] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
234[ 0.208332] pci 0000:00:1d.2: reg 20: [io 0x5040-0x505f]
235[ 0.208375] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
236[ 0.208430] pci 0000:00:1d.3: reg 20: [io 0x5060-0x507f]
237[ 0.208485] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
238[ 0.208510] pci 0000:00:1d.7: reg 10: [mem 0xe4344000-0xe43443ff]
239[ 0.208615] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
240[ 0.208642] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
241[ 0.208737] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
242[ 0.208854] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
243[ 0.209005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
244[ 0.210005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
245[ 0.211058] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
246[ 0.211076] pci 0000:00:1f.1: reg 10: [io 0x50a8-0x50af]
247[ 0.211089] pci 0000:00:1f.1: reg 14: [io 0x50c8-0x50cb]
248[ 0.211102] pci 0000:00:1f.1: reg 18: [io 0x50b0-0x50b7]
249[ 0.211114] pci 0000:00:1f.1: reg 1c: [io 0x50cc-0x50cf]
250[ 0.211127] pci 0000:00:1f.1: reg 20: [io 0x5080-0x508f]
251[ 0.211181] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
252[ 0.212003] pci 0000:00:1f.2: reg 10: [io 0x50b8-0x50bf]
253[ 0.212016] pci 0000:00:1f.2: reg 14: [io 0x50d0-0x50d3]
254[ 0.212029] pci 0000:00:1f.2: reg 18: [io 0x50c0-0x50c7]
255[ 0.212041] pci 0000:00:1f.2: reg 1c: [io 0x50d4-0x50d7]
256[ 0.212054] pci 0000:00:1f.2: reg 20: [io 0x5090-0x509f]
257[ 0.212067] pci 0000:00:1f.2: reg 24: [mem 0xe4344400-0xe43447ff]
258[ 0.212125] pci 0000:00:1f.2: PME# supported from D3hot
259[ 0.212150] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
260[ 0.212223] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
261[ 0.212364] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
262[ 0.212396] pci 0000:01:00.0: reg 10: [mem 0xe4100000-0xe411ffff]
263[ 0.212438] pci 0000:01:00.0: reg 18: [io 0x4000-0x401f]
264[ 0.212621] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
265[ 0.212665] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
266[ 0.213020] pci 0000:00:1c.0: PCI bridge to [bus 01]
267[ 0.214006] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
268[ 0.214014] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
269[ 0.214080] pci 0000:00:1c.1: PCI bridge to [bus 02]
270[ 0.215072] pci 0000:00:1c.2: PCI bridge to [bus 03]
271[ 0.217049] pci 0000:00:1c.3: PCI bridge to [bus 04]
272[ 0.218059] pci 0000:05:00.0: [104c:ac56] type 02 class 0x060700
273[ 0.218085] pci 0000:05:00.0: reg 10: [mem 0xe2000000-0xe2000fff]
274[ 0.218129] pci 0000:05:00.0: supports D1 D2
275[ 0.218132] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
276[ 0.218199] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
277[ 0.219006] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
278[ 0.219013] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
279[ 0.219022] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
280[ 0.219026] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
281[ 0.219030] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
282[ 0.219033] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
283[ 0.219037] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
284[ 0.219040] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
285[ 0.219044] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
286[ 0.219048] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
287[ 0.219051] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
288[ 0.219055] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
289[ 0.219058] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
290[ 0.219062] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
291[ 0.219065] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
292[ 0.219069] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
293[ 0.219073] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
294[ 0.219076] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
295[ 0.219080] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
296[ 0.219083] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
297[ 0.219087] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
298[ 0.219092] pci 0000:05:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
299[ 0.220049] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05] (conflicts with (null) [bus 05])
300[ 0.220055] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
301[ 0.220059] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05] (conflicts with (null) [bus 05])
302[ 0.220066] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05]
303[ 0.221034] pci_bus 0000:00: on NUMA node 0
304[ 0.221058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
305[ 0.221107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
306[ 0.221153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
307[ 0.221198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
308[ 0.222020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
309[ 0.227423] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
310[ 0.231297] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
311[ 0.235299] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
312[ 0.239295] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
313[ 0.243292] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
314[ 0.248296] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
315[ 0.252298] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
316[ 0.257295] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
317[ 0.261309] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
318[ 0.262007] vgaarb: loaded
319[ 0.263002] vgaarb: bridge control possible 0000:00:02.0
320[ 0.264097] SCSI subsystem initialized
321[ 0.265003] ACPI: bus type scsi registered
322[ 0.266023] libata version 3.00 loaded.
323[ 0.266083] PCI: Using ACPI for IRQ routing
324[ 0.273433] PCI: pci_cache_line_size set to 64 bytes
325[ 0.273518] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
326[ 0.273521] e820: reserve RAM buffer [mem 0xbf6c0000-0xbfffffff]
327[ 0.273688] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
328[ 0.280008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
329[ 0.285893] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
330[ 0.298011] Switching to clocksource hpet
331[ 0.302457] pnp: PnP ACPI init
332[ 0.305595] ACPI: bus type pnp registered
333[ 0.309764] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
334[ 0.316449] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
335[ 0.323136] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
336[ 0.329821] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
337[ 0.336501] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
338[ 0.343187] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
339[ 0.349866] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
340[ 0.356543] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
341[ 0.363222] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
342[ 0.363717] pnp 00:01: [dma 4]
343[ 0.363751] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
344[ 0.363788] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
345[ 0.363903] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
346[ 0.370620] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
347[ 0.370738] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
348[ 0.370801] system 00:05: [io 0x0800-0x080f] has been reserved
349[ 0.376795] system 00:05: [io 0x0500-0x057f] has been reserved
350[ 0.382779] system 00:05: [io 0x0480-0x04bf] has been reserved
351[ 0.388765] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
352[ 0.388804] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
353[ 0.388860] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
354[ 0.388910] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
355[ 0.388949] pnp: PnP ACPI: found 9 devices
356[ 0.393117] ACPI: ACPI bus type pnp unregistered
357[ 0.435200] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
358[ 0.435214] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
359[ 0.435219] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
360[ 0.435223] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
361[ 0.435236] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
362[ 0.435241] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
363[ 0.435245] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
364[ 0.435257] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
365[ 0.435262] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
366[ 0.435266] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
367[ 0.435292] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
368[ 0.435296] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
369[ 0.435301] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
370[ 0.435305] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
371[ 0.435309] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
372[ 0.435313] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
373[ 0.435317] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
374[ 0.435321] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
375[ 0.435325] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
376[ 0.435329] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
377[ 0.435339] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
378[ 0.443254] pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0200000-0xc03fffff]
379[ 0.450203] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
380[ 0.458115] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0600000-0xc07fffff]
381[ 0.465057] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
382[ 0.472969] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0a00000-0xc0bfffff]
383[ 0.479912] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0c00000-0xc0dfffff 64bit pref]
384[ 0.487823] pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
385[ 0.494071] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
386[ 0.500322] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
387[ 0.506567] pci 0000:00:1c.0: PCI bridge to [bus 01]
388[ 0.511598] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
389[ 0.517762] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
390[ 0.524622] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
391[ 0.532450] pci 0000:00:1c.1: PCI bridge to [bus 02]
392[ 0.537485] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
393[ 0.543649] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff]
394[ 0.550512] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
395[ 0.558340] pci 0000:00:1c.2: PCI bridge to [bus 03]
396[ 0.563378] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
397[ 0.569538] pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc07fffff]
398[ 0.576389] pci 0000:00:1c.2: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
399[ 0.584219] pci 0000:00:1c.3: PCI bridge to [bus 04]
400[ 0.589256] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
401[ 0.595419] pci 0000:00:1c.3: bridge window [mem 0xc0a00000-0xc0bfffff]
402[ 0.602281] pci 0000:00:1c.3: bridge window [mem 0xc0c00000-0xc0dfffff 64bit pref]
403[ 0.610111] pci 0000:05:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
404[ 0.610115] pci 0000:05:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
405[ 0.610119] pci 0000:05:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
406[ 0.610123] pci 0000:05:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
407[ 0.610131] pci 0000:05:00.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
408[ 0.617522] pci 0000:05:00.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
409[ 0.624461] pci 0000:05:00.0: BAR 13: assigned [io 0x2000-0x20ff]
410[ 0.630705] pci 0000:05:00.0: BAR 14: assigned [io 0x2400-0x24ff]
411[ 0.636949] pci 0000:05:00.0: CardBus bridge to [bus 06-09]
412[ 0.642588] pci 0000:05:00.0: bridge window [io 0x2000-0x20ff]
413[ 0.648751] pci 0000:05:00.0: bridge window [io 0x2400-0x24ff]
414[ 0.654916] pci 0000:05:00.0: bridge window [mem 0xc4000000-0xc7ffffff pref]
415[ 0.662215] pci 0000:05:00.0: bridge window [mem 0xc8000000-0xcbffffff]
416[ 0.669072] pci 0000:00:1e.0: PCI bridge to [bus 05]
417[ 0.674108] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
418[ 0.680271] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
419[ 0.687131] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
420[ 0.694980] pci 0000:00:1c.1: enabling device (0104 -> 0107)
421[ 0.700720] pci 0000:00:1c.2: enabling device (0004 -> 0007)
422[ 0.706456] pci 0000:00:1c.3: enabling device (0004 -> 0007)
423[ 0.712191] pci 0000:00:1e.0: enabling device (0104 -> 0107)
424[ 0.717926] pci 0000:00:1e.0: setting latency timer to 64
425[ 0.717945] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
426[ 0.717949] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
427[ 0.717953] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
428[ 0.717956] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
429[ 0.717959] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
430[ 0.717963] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
431[ 0.717966] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
432[ 0.717970] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
433[ 0.717973] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
434[ 0.717977] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
435[ 0.717980] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
436[ 0.717983] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
437[ 0.717987] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
438[ 0.717990] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
439[ 0.717994] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
440[ 0.717997] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
441[ 0.718001] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff]
442[ 0.718013] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
443[ 0.718016] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
444[ 0.718020] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
445[ 0.718023] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
446[ 0.718027] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
447[ 0.718030] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc03fffff]
448[ 0.718034] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
449[ 0.718038] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
450[ 0.718041] pci_bus 0000:03: resource 1 [mem 0xc0600000-0xc07fffff]
451[ 0.718045] pci_bus 0000:03: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
452[ 0.718048] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
453[ 0.718052] pci_bus 0000:04: resource 1 [mem 0xc0a00000-0xc0bfffff]
454[ 0.718055] pci_bus 0000:04: resource 2 [mem 0xc0c00000-0xc0dfffff 64bit pref]
455[ 0.718059] pci_bus 0000:05: resource 0 [io 0x2000-0x3fff]
456[ 0.718062] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
457[ 0.718066] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
458[ 0.718069] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
459[ 0.718073] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
460[ 0.718076] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
461[ 0.718080] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
462[ 0.718083] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
463[ 0.718086] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
464[ 0.718090] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
465[ 0.718093] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
466[ 0.718097] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
467[ 0.718100] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
468[ 0.718104] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
469[ 0.718107] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
470[ 0.718110] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
471[ 0.718114] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
472[ 0.718117] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
473[ 0.718121] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
474[ 0.718124] pci_bus 0000:05: resource 20 [mem 0xc0000000-0xfebfffff]
475[ 0.718128] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
476[ 0.718131] pci_bus 0000:06: resource 0 [io 0x2000-0x20ff]
477[ 0.718135] pci_bus 0000:06: resource 1 [io 0x2400-0x24ff]
478[ 0.718138] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc7ffffff pref]
479[ 0.718142] pci_bus 0000:06: resource 3 [mem 0xc8000000-0xcbffffff]
480[ 0.718182] NET: Registered protocol family 2
481[ 0.722766] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
482[ 0.729922] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
483[ 0.736476] TCP: Hash tables configured (established 8192 bind 8192)
484[ 0.742924] TCP: reno registered
485[ 0.746227] UDP hash table entries: 512 (order: 2, 16384 bytes)
486[ 0.752223] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
487[ 0.758710] NET: Registered protocol family 1
488[ 0.763148] pci 0000:00:02.0: Boot video device
489[ 0.763321] PCI: CLS 64 bytes, default 64
490[ 0.763649] audit: initializing netlink socket (disabled)
491[ 0.769127] type=2000 audit(1387168885.768:1): initialized
492[ 0.775114] bounce pool size: 64 pages
493[ 0.778939] HugeTLB registered 4 MB page size, pre-allocated 0 pages
494[ 0.787401] VFS: Disk quotas dquot_6.5.2
495[ 0.791459] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
496[ 0.798587] msgmni has been set to 1712
497[ 0.802845] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
498[ 0.810325] io scheduler noop registered
499[ 0.814319] io scheduler deadline registered
500[ 0.818688] io scheduler cfq registered (default)
501[ 0.823602] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
502[ 0.823761] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
503[ 0.823909] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
504[ 0.824065] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
505[ 0.824200] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
506[ 0.831234] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
507[ 0.837833] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
508[ 0.837860] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
509[ 0.844895] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
510[ 0.844921] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
511[ 0.851953] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
512[ 0.851979] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
513[ 0.859013] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
514[ 0.859051] intel_idle: does not run on family 6 model 14
515[ 0.859110] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
516[ 0.886264] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
517[ 0.892894] ahci 0000:00:1f.2: version 3.0
518[ 0.892943] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
519[ 0.892993] ahci: SSS flag set, parallel bus scan disabled
520[ 0.898577] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
521[ 0.906917] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
522[ 0.914998] ahci 0000:00:1f.2: setting latency timer to 64
523[ 0.915436] scsi0 : ahci
524[ 0.918137] scsi1 : ahci
525[ 0.920828] scsi2 : ahci
526[ 0.923525] scsi3 : ahci
527[ 0.926181] ata1: SATA max UDMA/133 abar m1024@0xe4344400 port 0xe4344500 irq 44
528[ 0.933652] ata2: DUMMY
529[ 0.936167] ata3: DUMMY
530[ 0.938679] ata4: DUMMY
531[ 0.941279] ata_piix 0000:00:1f.1: version 2.13
532[ 0.941329] ata_piix 0000:00:1f.1: setting latency timer to 64
533[ 0.941640] scsi4 : ata_piix
534[ 0.944749] scsi5 : ata_piix
535[ 0.947751] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
536[ 0.954783] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
537[ 0.961997] ata6: port disabled--ignoring
538[ 0.962044] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
539[ 0.979611] serio: i8042 KBD port at 0x60,0x64 irq 1
540[ 0.984669] serio: i8042 AUX port at 0x60,0x64 irq 12
541[ 0.989919] mousedev: PS/2 mouse device common for all mice
542[ 0.995618] rtc_cmos 00:06: RTC can wake from S4
543[ 1.000480] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
544[ 1.006685] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
545[ 1.013626] device-mapper: uevent: version 1.0.3
546[ 1.018405] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
547[ 1.026940] cpuidle: using governor ladder
548[ 1.031123] cpuidle: using governor menu
549[ 1.035142] sdhci: Secure Digital Host Controller Interface driver
550[ 1.041461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
551[ 1.050150] sdhci: Copyright(c) Pierre Ossman
552[ 1.054705] TCP: cubic registered
553[ 1.058219] NET: Registered protocol family 10
554[ 1.062972] mip6: Mobile IPv6
555[ 1.066013] NET: Registered protocol family 17
556[ 1.070536] Key type dns_resolver registered
557[ 1.075059] Using IPI No-Shortcut mode
558[ 1.115421] ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33
559[ 1.129296] ata5.00: configured for UDMA/33
560[ 1.605029] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
561[ 1.612367] ata1.00: ATA-7: HTS541040G9SA00, MB2IC60R, max UDMA/100
562[ 1.618703] ata1.00: 78140160 sectors, multi 0: LBA48
563[ 1.625221] ata1.00: configured for UDMA/100
564[ 1.629711] scsi 0:0:0:0: Direct-Access ATA HTS541040G9SA00 MB2I PQ: 0 ANSI: 5
565[ 1.638069] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
566[ 1.645808] sd 0:0:0:0: [sda] Write Protect is off
567[ 1.650692] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
568[ 1.650720] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
569[ 1.659887] scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5
570[ 1.673341] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
571[ 1.680193] cdrom: Uniform CD-ROM driver Revision: 3.20
572[ 1.687867] sr 4:0:0:0: Attached scsi CD-ROM sr0
573[ 1.764024] tsc: Refined TSC clocksource calibration: 1994.999 MHz
574[ 1.770274] Switching to clocksource tsc
575[ 2.040577] sda: sda1 sda2 < sda5 >
576[ 2.044525] sd 0:0:0:0: [sda] Attached SCSI disk
577[ 2.049236] attempt to access beyond end of device
578[ 2.054107] sda2: rw=16, want=8, limit=2
579[ 2.058093] Read-error on swap-device (8:2:0)
580[ 2.062548] registered taskstats version 1
581[ 2.067312] rtc_cmos 00:06: setting system clock to 2013-12-16 04:41:28 UTC (1387168888)
582[ 2.075890] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
583[ 2.084972] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (244)
584[ 2.111949] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
585[ 2.118885] EXT4-fs (sda1): write access will be enabled during recovery
586[ 2.778697] EXT4-fs (sda1): orphan cleanup on readonly fs
587[ 2.795301] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785594
588[ 2.795393] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785593
589[ 2.795414] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785592
590[ 2.795435] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785584
591[ 2.812533] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785583
592[ 2.812554] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785582
593[ 2.812574] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785581
594[ 2.812593] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785580
595[ 2.812612] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785579
596[ 2.812631] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785578
597[ 2.838288] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 785404
598[ 2.875421] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1700866
599[ 2.936849] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1835177
600[ 2.937064] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1835181
601[ 2.937287] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 784910
602[ 2.937299] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 784909
603[ 2.937310] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 784908
604[ 2.937320] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 784907
605[ 2.937560] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 784906
606[ 2.937570] EXT4-fs (sda1): 19 orphan inodes deleted
607[ 2.942602] EXT4-fs (sda1): recovery complete
608[ 3.132469] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
609[ 3.140215] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
610[ 3.146920] Freeing unused kernel memory: 368k freed
611[ 3.152176] Write protecting the kernel text: 3320k
612[ 3.157148] Write protecting the kernel read-only data: 1252k
613[ 6.375923] Linux agpgart interface v0.103
614[ 6.505173] input: PC Speaker as /devices/platform/pcspkr/input/input1
615[ 6.545334] ACPI Warning: 0x00000528-0x0000052f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
616[ 6.556025] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
617[ 6.574435] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input2
618[ 6.566294] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
619[ 6.574943] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
620[ 6.574945] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
621[ 6.574950] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
622[ 6.574951] lpc_ich: Resource conflict(s) found affecting gpio_ich
623[ 6.577233] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
624[ 6.577294] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
625[ 6.637554] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
626[ 6.639119] ACPI: Sleep Button [SLPB]
627[ 6.651240] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
628[ 6.655008] ACPI: Battery Slot [BAT0] (battery present)
629[ 6.655164] ACPI: Battery Slot [BAT1] (battery absent)
630[ 6.656064] ACPI: AC Adapter [AC] (on-line)
631[ 6.656145] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20121018/ac-122)
632[ 6.658141] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input3
633[ 6.658321] ACPI: Lid Switch [LID]
634[ 6.658437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
635[ 6.658441] ACPI: Power Button [PWRF]
636[ 6.688948] ACPI: Requesting acpi_cpufreq
637[ 6.689339] ACPI: processor limited to max C-state 2
638[ 6.689773] Monitor-Mwait will be used to enter C-1 state
639[ 6.689781] tsc: Marking TSC unstable due to TSC halts in idle
640[ 6.689827] ACPI: acpi_idle registered with cpuidle
641[ 6.692954] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
642[ 6.693184] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
643[ 6.693520] thermal LNXTHERM:00: registered as thermal_zone0
644[ 6.693522] ACPI: Thermal Zone [THM0] (59 C)
645[ 6.695576] thermal LNXTHERM:01: registered as thermal_zone1
646[ 6.695579] ACPI: Thermal Zone [THM1] (35 C)
647[ 6.700864] Switching to clocksource hpet
648[ 6.763413] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
649[ 6.776136] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
650[ 6.856713] [drm] Initialized drm 1.1.0 20060810
651[ 7.048686] i915 0000:00:02.0: setting latency timer to 64
652[ 7.049985] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
653[ 7.056749] [drm] Driver supports precise vblank timestamp query.
654[ 7.063024] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
655[ 7.078826] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
656[ 7.085631] yenta_cardbus 0000:05:00.0: Using CSCINT to route CSC interrupts to PCI
657[ 7.093395] yenta_cardbus 0000:05:00.0: Routing CardBus interrupts to PCI
658[ 7.100280] yenta_cardbus 0000:05:00.0: TI: mfunc 0x01d01002, devctl 0x66
659[ 7.174715] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54
660[ 7.181017] Non-volatile memory driver v1.3
661[ 7.185566] microcode: Missing Free firmware
662[ 7.197112] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
663[ 7.203332] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
664[ 7.210000] e1000e 0000:01:00.0: Disabling ASPM L0s L1
665[ 7.215435] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
666[ 7.225317] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
667[ 7.232451] [drm] initialized overlay support
668[ 7.248881] ACPI: bus type usb registered
669[ 7.253165] usbcore: registered new interface driver usbfs
670[ 7.258926] usbcore: registered new interface driver hub
671[ 7.264772] usbcore: registered new device driver usb
672[ 7.302348] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
673[ 7.328553] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:15:58:7b:44:9c
674[ 7.331831] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0ce8, PCI irq 16
675[ 7.331834] yenta_cardbus 0000:05:00.0: Socket status: 30000007
676[ 7.331838] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09
677[ 7.331848] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io 0x2000-0x3fff]
678[ 7.331851] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
679[ 7.331854] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
680[ 7.331866] excluding 0xe1ef0000-0xe20fffff
681[ 7.331869] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
682[ 7.331871] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
683[ 7.331899] excluding 0xe2100000-0xe40fffff
684[ 7.409555] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
685[ 7.416760] ehci-pci: EHCI PCI platform driver
686[ 7.419530] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005301-003
687[ 7.459668] uhci_hcd: USB Universal Host Controller Interface driver
688[ 7.488057] microcode: CPU1 sig=0x6ec, pf=0x20, revision=0x54
689[ 7.493870] microcode: Missing Free firmware
690[ 7.505067] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
691[ 7.516203] fbcon: inteldrmfb (fb0) is primary device
692[ 7.605082] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 67352
693[ 7.605088] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
694[ 7.612320] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
695[ 7.612343] excluding 0xf0000-0xfffff
696[ 7.612362] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
697[ 7.612390] excluding 0xa0000000-0xa0ffffff
698[ 7.612409] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
699[ 7.612436] excluding 0x60000000-0x60ffffff
700[ 7.648906] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
701[ 8.029095] Console: switching to colour frame buffer device 128x48
702[ 8.142442] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
703[ 8.149042] i915 0000:00:02.0: registered panic notifier
704[ 8.154775] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
705[ 8.162586] ehci-pci 0000:00:1d.7: setting latency timer to 64
706[ 8.162591] ehci-pci 0000:00:1d.7: EHCI Host Controller
707[ 8.168238] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
708[ 8.176179] ehci-pci 0000:00:1d.7: debug port 1
709[ 8.185517] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
710[ 8.185547] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4344000
711[ 8.197045] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
712[ 8.203203] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
713[ 8.210601] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
714[ 8.218287] usb usb1: Product: EHCI Host Controller
715[ 8.223713] usb usb1: Manufacturer: Linux 3.8.3-gnusam ehci_hcd
716[ 8.244892] usb usb1: SerialNumber: 0000:00:1d.7
717[ 8.264791] hub 1-0:1.0: USB hub found
718[ 8.283535] hub 1-0:1.0: 8 ports detected
719[ 8.302900] uhci_hcd 0000:00:1d.0: setting latency timer to 64
720[ 8.302906] uhci_hcd 0000:00:1d.0: UHCI Host Controller
721[ 8.322664] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
722[ 8.344572] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
723[ 8.364591] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
724[ 8.385760] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
725[ 8.407347] usb usb2: Product: UHCI Host Controller
726[ 8.426633] usb usb2: Manufacturer: Linux 3.8.3-gnusam uhci_hcd
727[ 8.446699] usb usb2: SerialNumber: 0000:00:1d.0
728[ 8.465428] hub 2-0:1.0: USB hub found
729[ 8.483332] hub 2-0:1.0: 2 ports detected
730[ 8.501783] hda_intel: probe_mask set to 0x1 for device 17aa:2010
731[ 8.521810] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
732[ 8.623051] usb 1-6: new high-speed USB device number 2 using ehci-pci
733[ 8.757436] usb 1-6: New USB device found, idVendor=04b3, idProduct=4485
734[ 8.777834] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
735[ 8.798833] hub 1-6:1.0: USB hub found
736[ 8.816429] hub 1-6:1.0: 4 ports detected
737[ 8.833872] uhci_hcd 0000:00:1d.1: setting latency timer to 64
738[ 8.833878] uhci_hcd 0000:00:1d.1: UHCI Host Controller
739[ 8.853448] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
740[ 8.875268] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
741[ 8.894272] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
742[ 8.914215] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
743[ 8.934724] usb usb3: Product: UHCI Host Controller
744[ 8.952269] usb usb3: Manufacturer: Linux 3.8.3-gnusam uhci_hcd
745[ 8.970853] usb usb3: SerialNumber: 0000:00:1d.1
746[ 8.987986] hub 3-0:1.0: USB hub found
747[ 9.003615] hub 3-0:1.0: 2 ports detected
748[ 9.019662] uhci_hcd 0000:00:1d.2: setting latency timer to 64
749[ 9.019667] uhci_hcd 0000:00:1d.2: UHCI Host Controller
750[ 9.036573] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
751[ 9.055654] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
752[ 9.072889] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
753[ 9.091155] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
754[ 9.109709] usb usb4: Product: UHCI Host Controller
755[ 9.125953] usb usb4: Manufacturer: Linux 3.8.3-gnusam uhci_hcd
756[ 9.143099] usb usb4: SerialNumber: 0000:00:1d.2
757[ 9.159577] hub 4-0:1.0: USB hub found
758[ 9.174755] hub 4-0:1.0: 2 ports detected
759[ 9.189635] uhci_hcd 0000:00:1d.3: setting latency timer to 64
760[ 9.189641] uhci_hcd 0000:00:1d.3: UHCI Host Controller
761[ 9.205651] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
762[ 9.224317] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
763[ 9.240963] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
764[ 9.258972] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
765[ 9.277198] usb usb5: Product: UHCI Host Controller
766[ 9.293024] usb usb5: Manufacturer: Linux 3.8.3-gnusam uhci_hcd
767[ 9.309875] usb usb5: SerialNumber: 0000:00:1d.3
768[ 9.326414] hub 5-0:1.0: USB hub found
769[ 9.341349] hub 5-0:1.0: 2 ports detected
770[ 9.658049] usb 5-1: new full-speed USB device number 2 using uhci_hcd
771[ 9.830974] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
772[ 9.848711] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
773[ 9.866905] usb 5-1: Product: BCM2045B
774[ 9.881600] usb 5-1: Manufacturer: Broadcom Corp
775[ 9.943861] Bluetooth: Core ver 2.16
776[ 9.958293] NET: Registered protocol family 31
777[ 9.973458] Bluetooth: HCI device and connection manager initialized
778[ 9.990702] Bluetooth: HCI socket layer initialized
779[ 10.006469] Bluetooth: L2CAP socket layer initialized
780[ 10.022331] Bluetooth: SCO socket layer initialized
781[ 10.067193] usbcore: registered new interface driver btusb
782[ 11.938181] Adding 1028124k swap on /dev/sda5. Priority:0 extents:1 across:1028124k
783[ 11.998088] EXT4-fs (sda1): re-mounted. Opts: (null)
784[ 12.569758] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
785[ 14.151418] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
786[ 14.404975] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
787[ 19.899212] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
788[ 23.831612] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
789[ 23.848513] Bluetooth: BNEP filters: protocol multicast
790[ 23.865247] Bluetooth: BNEP socket layer initialized
791[ 23.937899] Bluetooth: RFCOMM TTY layer initialized
792[ 23.954123] Bluetooth: RFCOMM socket layer initialized
793[ 23.970507] Bluetooth: RFCOMM ver 1.11
794[ 25.604714] lp: driver loaded but no devices found
795[ 25.915998] ppdev: user-space parallel port driver
796[ 26.189284] parport0: PC-style at 0x3bc (0x7bc) [PCSPP,TRISTATE]
797[ 26.329070] parport0: irq 7 detected
798[ 26.426681] lp0: using parport0 (polling).
799[ 26.441995] lp0: console ready
800[ 27.588199] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
801[ 27.689147] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
802[ 27.689683] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
803[ 30.551045] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
804[ 30.558727] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready