Gitiles
Code Review Sign In
review.coreboot.org / board-status / b3431977e3661ed0c501df06113f5d01b4c9298e / . / asus / f2a85-m / 4.0-6156-gf2f7f03 / 2014-05-26T08:52:16Z / kernel_log.txt
blob: 6cd315f55cf699118d3ac0294391182b9c3b22a5 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
4[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
5[ 0.000000] KERNEL supported cpus:
6[ 0.000000] Intel GenuineIntel
7[ 0.000000] AMD AuthenticAMD
8[ 0.000000] Centaur CentaurHauls
9[ 0.000000] e820: BIOS-provided physical RAM map:
10[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf11dfff] usable
14[ 0.000000] BIOS-e820: [mem 0x00000000bf11e000-0x00000000dfffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
17[ 0.000000] NX (Execute Disable) protection: active
18[ 0.000000] DMI present.
19[ 0.000000] DMI: ASUS F2A85-M/F2A85-M, BIOS 4.0-6156-gf2f7f03 05/27/2014
20[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
21[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
22[ 0.000000] No AGP bridge found
23[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
24[ 0.000000] MTRR default type: uncachable
25[ 0.000000] MTRR fixed ranges enabled:
26[ 0.000000] 00000-9FFFF write-back
27[ 0.000000] A0000-BFFFF uncachable
28[ 0.000000] C0000-FFFFF write-back
29[ 0.000000] MTRR variable ranges enabled:
30[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
31[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
32[ 0.000000] 2 disabled
33[ 0.000000] 3 disabled
34[ 0.000000] 4 disabled
35[ 0.000000] 5 disabled
36[ 0.000000] 6 base 0000FF800000 mask FFFFFF800000 write-protect
37[ 0.000000] 7 disabled
38[ 0.000000] TOM2: 000000021f000000 aka 8688M
39[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
40[ 0.000000] e820: last_pfn = 0xbf11e max_arch_pfn = 0x400000000
41[ 0.000000] found SMP MP-table at [mem 0x000fd950-0x000fd95f] mapped at [ffff8800000fd950]
42[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
43[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
44[ 0.000000] Using GB pages for direct mapping
45[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbf11dfff]
46[ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
47[ 0.000000] [mem 0x80000000-0xbeffffff] page 2M
48[ 0.000000] [mem 0xbf000000-0xbf11dfff] page 4k
49[ 0.000000] kernel direct mapping tables up to 0xbf11dfff @ [mem 0x1fffd000-0x1fffffff]
50[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21effffff]
51[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
52[ 0.000000] [mem 0x200000000-0x21effffff] page 2M
53[ 0.000000] kernel direct mapping tables up to 0x21effffff @ [mem 0xbf11c000-0xbf11dfff]
54[ 0.000000] RAMDISK: [mem 0x362e2000-0x37168fff]
55[ 0.000000] ACPI: RSDP 00000000000fd930 00014 (v00 CORE )
56[ 0.000000] ACPI: RSDT 00000000bf132624 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: FACP 00000000bf133f88 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: DSDT 00000000bf1326c8 0187C (v02 ASUS COREBOOT 00010001 INTL 20130626)
59[ 0.000000] ACPI: FACS 00000000bf133f48 00040
60[ 0.000000] ACPI: HPET 00000000bf134080 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 00000000bf1340b8 00072 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HEST 00000000bf134130 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: SSDT 00000000bf134300 0051F (v02 AMD ALIB 00000001 MSFT 04000000)
64[ 0.000000] ACPI: SSDT 00000000bf134820 00D40 (v01 AMD POWERNOW 00000001 AMD 00000001)
65[ 0.000000] ACPI: SSDT 00000000bf135560 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
66[ 0.000000] ACPI: Local APIC address 0xfee00000
67[ 0.000000] No NUMA configuration found
68[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
69[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
70[ 0.000000] NODE_DATA [mem 0x21effc000-0x21effffff]
71[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216e00000-ffff88021e5fffff] on node 0
72[ 0.000000] Zone ranges:
73[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
74[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
75[ 0.000000] Normal [mem 0x100000000-0x21effffff]
76[ 0.000000] Movable zone start for each node
77[ 0.000000] Early memory node ranges
78[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
79[ 0.000000] node 0: [mem 0x00100000-0xbf11dfff]
80[ 0.000000] node 0: [mem 0x100000000-0x21effffff]
81[ 0.000000] On node 0 totalpages: 1958061
82[ 0.000000] DMA zone: 64 pages used for memmap
83[ 0.000000] DMA zone: 6 pages reserved
84[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
85[ 0.000000] DMA32 zone: 16320 pages used for memmap
86[ 0.000000] DMA32 zone: 762206 pages, LIFO batch:31
87[ 0.000000] Normal zone: 18368 pages used for memmap
88[ 0.000000] Normal zone: 1157184 pages, LIFO batch:31
89[ 0.000000] ACPI: PM-Timer IO Port: 0x818
90[ 0.000000] ACPI: Local APIC address 0xfee00000
91[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
92[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
93[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
94[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
95[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
96[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
97[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
98[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
99[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
100[ 0.000000] ACPI: IRQ0 used by override.
101[ 0.000000] ACPI: IRQ2 used by override.
102[ 0.000000] ACPI: IRQ9 used by override.
103[ 0.000000] Using ACPI (MADT) for SMP configuration information
104[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
105[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
106[ 0.000000] nr_irqs_gsi: 40
107[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
108[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
109[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
110[ 0.000000] PM: Registered nosave memory: 00000000bf11e000 - 00000000e0000000
111[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
112[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
113[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
114[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
115[ 0.000000] Booting paravirtualized kernel on bare hardware
116[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
117[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s83584 r8192 d22912 u524288
118[ 0.000000] pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
119[ 0.000000] pcpu-alloc: [0] 0 1 2 3
120[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1923303
121[ 0.000000] Policy zone: Normal
122[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
123[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
124[ 0.000000] __ex_table already sorted, skipping sort
125[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
126[ 0.000000] Checking aperture...
127[ 0.000000] No AGP bridge found
128[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
129[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
130[ 0.000000] Memory: 7612140k/8896512k available (6711k kernel code, 1064268k absent, 220104k reserved, 6459k data, 928k init)
131[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
132[ 0.000000] Hierarchical RCU implementation.
133[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
134[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
135[ 0.000000] spurious 8259A interrupt: IRQ7.
136[ 0.000000] Console: colour VGA+ 80x25
137[ 0.000000] console [ttyS0] enabled
138[ 0.000000] allocated 31457280 bytes of page_cgroup
139[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
140[ 0.000000] hpet clockevent registered
141[ 0.000000] Fast TSC calibration using PIT
142[ 0.004000] Detected 3793.255 MHz processor.
143[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7586.51 BogoMIPS (lpj=15173020)
144[ 0.010669] pid_max: default: 32768 minimum: 301
145[ 0.015287] Security Framework initialized
146[ 0.019380] AppArmor: AppArmor initialized
147[ 0.023462] Yama: becoming mindful.
148[ 0.027431] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
149[ 0.036701] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
150[ 0.044730] Mount-cache hash table entries: 256
151[ 0.049404] Initializing cgroup subsys cpuacct
152[ 0.053838] Initializing cgroup subsys memory
153[ 0.058185] Initializing cgroup subsys devices
154[ 0.062609] Initializing cgroup subsys freezer
155[ 0.067039] Initializing cgroup subsys blkio
156[ 0.071296] Initializing cgroup subsys perf_event
157[ 0.076003] tseg: 0000000000
158[ 0.076013] CPU: Physical Processor ID: 0
159[ 0.080010] CPU: Processor Core ID: 0
160[ 0.083663] mce: CPU supports 7 MCE banks
161[ 0.088995] ACPI: Core revision 20120320
162[ 0.093903] ftrace: allocating 25118 entries in 99 pages
163[ 0.107001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
164[ 0.152362] CPU0: AMD A10-5800K APU with Radeon(tm) HD Graphics stepping 01
165[ 0.265927] Performance Events: AMD Family 15h PMU driver.
166[ 0.271409] ... version: 0
167[ 0.275397] ... bit width: 48
168[ 0.279473] ... generic registers: 6
169[ 0.283464] ... value mask: 0000ffffffffffff
170[ 0.288748] ... max period: 00007fffffffffff
171[ 0.294034] ... fixed-purpose events: 0
172[ 0.298022] ... event mask: 000000000000003f
173[ 0.303420] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
174[ 0.311463] Booting Node 0, Processors #1 #2 #3 Ok.
175[ 0.355746] Brought up 4 CPUs
176[ 0.358708] Total of 4 processors activated (30346.04 BogoMIPS).
177[ 0.365571] devtmpfs: initialized
178[ 0.370083] EVM: security.selinux
179[ 0.373385] EVM: security.SMACK64
180[ 0.376686] EVM: security.capability
181[ 0.380986] dummy:
182[ 0.383099] RTC time: 13:57:26, date: 05/27/14
183[ 0.387555] NET: Registered protocol family 16
184[ 0.392156] Trying to unpack rootfs image as initramfs...
185[ 0.397558] ACPI: bus type pci registered
186[ 0.401589] PCI: Using configuration type 1 for base access
187[ 0.407137] PCI: Using configuration type 1 for extended access
188[ 0.413955] bio: create slab <bio-0> at 0
189[ 0.418027] ACPI: Added _OSI(Module Device)
190[ 0.422189] ACPI: Added _OSI(Processor Device)
191[ 0.426609] ACPI: Added _OSI(3.0 _SCP Extensions)
192[ 0.431291] ACPI: Added _OSI(Processor Aggregator Device)
193[ 0.437109] ACPI: EC: Look up EC in DSDT
194[ 0.437603] ACPI: Executed 1 blocks of module-level executable AML code
195[ 0.446441] ACPI: Interpreter enabled
196[ 0.450091] ACPI: (supports S0 S1 S2 S3 S4 S5)
197[ 0.454633] ACPI: BIOS offers _BFS
198[ 0.458017] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
199[ 0.466325] ACPI: Using IOAPIC for interrupt routing
200[ 0.472910] ACPI: No dock devices found.
201[ 0.476819] HEST: Table parsing has been initialized.
202[ 0.481847] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
203[ 0.491005] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
204[ 0.497221] pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7]
205[ 0.503892] pci_root PNP0A03:00: >host bridge window [io 0x03b0-0x03df]
206[ 0.510559] pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff]
207[ 0.517227] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
208[ 0.524593] pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
209[ 0.531958] pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xffffffff]
210[ 0.539316] pci_root PNP0A03:00: >host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
211[ 0.549544] PCI host bridge to bus 0000:00
212[ 0.553626] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
213[ 0.559869] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
214[ 0.566103] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
215[ 0.573031] pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
216[ 0.579966] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xffffffff]
217[ 0.586906] pci 0000:00:00.0: >[1022:1410] type 00 class 0x060000
218[ 0.586942] pci 0000:00:01.0: >[1002:9901] type 00 class 0x030000
219[ 0.586949] pci 0000:00:01.0: >reg 10: [mem 0xe0000000-0xefffffff pref]
220[ 0.586954] pci 0000:00:01.0: >reg 14: [io 0x3000-0x30ff]
221[ 0.586958] pci 0000:00:01.0: >reg 18: [mem 0xf0200000-0xf023ffff]
222[ 0.586992] pci 0000:00:01.0: >supports D1 D2
223[ 0.587008] pci 0000:00:01.1: >[1002:9902] type 00 class 0x040300
224[ 0.587014] pci 0000:00:01.1: >reg 10: [mem 0xf0240000-0xf0243fff]
225[ 0.587051] pci 0000:00:01.1: >supports D1 D2
226[ 0.587066] pci 0000:00:02.0: >[1022:1412] type 01 class 0x060400
227[ 0.587093] Freeing initrd memory: 14876k freed
228[ 0.587111] pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
229[ 0.587175] pci 0000:00:10.0: >[1022:7812] type 00 class 0x0c0330
230[ 0.587201] pci 0000:00:10.0: >reg 10: [mem 0xf0248000-0xf0249fff 64bit]
231[ 0.587349] pci 0000:00:10.0: >PME# supported from D0 D3hot D3cold
232[ 0.587409] pci 0000:00:10.1: >[1022:7812] type 00 class 0x0c0330
233[ 0.587435] pci 0000:00:10.1: >reg 10: [mem 0xf024a000-0xf024bfff 64bit]
234[ 0.587584] pci 0000:00:10.1: >PME# supported from D0 D3hot D3cold
235[ 0.587633] pci 0000:00:11.0: >[1022:7801] type 00 class 0x010601
236[ 0.587653] pci 0000:00:11.0: >reg 10: [io 0x3410-0x3417]
237[ 0.587663] pci 0000:00:11.0: >reg 14: [io 0x3420-0x3423]
238[ 0.587673] pci 0000:00:11.0: >reg 18: [io 0x3418-0x341f]
239[ 0.587684] pci 0000:00:11.0: >reg 1c: [io 0x3424-0x3427]
240[ 0.587694] pci 0000:00:11.0: >reg 20: [io 0x3400-0x340f]
241[ 0.587704] pci 0000:00:11.0: >reg 24: [mem 0xf024f000-0xf024f7ff]
242[ 0.587760] pci 0000:00:12.0: >[1022:7807] type 00 class 0x0c0310
243[ 0.587774] pci 0000:00:12.0: >reg 10: [mem 0xf024c000-0xf024cfff]
244[ 0.587860] pci 0000:00:12.2: >[1022:7808] type 00 class 0x0c0320
245[ 0.587881] pci 0000:00:12.2: >reg 10: [mem 0xf024f800-0xf024f8ff]
246[ 0.587983] pci 0000:00:12.2: >supports D1 D2
247[ 0.587984] pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
248[ 0.588013] pci 0000:00:13.0: >[1022:7807] type 00 class 0x0c0310
249[ 0.588027] pci 0000:00:13.0: >reg 10: [mem 0xf024d000-0xf024dfff]
250[ 0.588113] pci 0000:00:13.2: >[1022:7808] type 00 class 0x0c0320
251[ 0.588134] pci 0000:00:13.2: >reg 10: [mem 0xf024f900-0xf024f9ff]
252[ 0.588235] pci 0000:00:13.2: >supports D1 D2
253[ 0.588236] pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
254[ 0.588262] pci 0000:00:14.0: >[1022:780b] type 00 class 0x0c0500
255[ 0.588357] pci 0000:00:14.2: >[1022:780d] type 00 class 0x040300
256[ 0.588381] pci 0000:00:14.2: >reg 10: [mem 0xf0244000-0xf0247fff 64bit]
257[ 0.588462] pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
258[ 0.588477] pci 0000:00:14.3: >[1022:780e] type 00 class 0x060100
259[ 0.588569] pci 0000:00:14.4: >[1022:780f] type 01 class 0x060401
260[ 0.588618] pci 0000:00:14.5: >[1022:7809] type 00 class 0x0c0310
261[ 0.588633] pci 0000:00:14.5: >reg 10: [mem 0xf024e000-0xf024efff]
262[ 0.588710] pci 0000:00:14.7: >[1022:7806] type 00 class 0x080501
263[ 0.588730] pci 0000:00:14.7: >reg 10: [mem 0xf024fa00-0xf024faff 64bit]
264[ 0.588807] pci 0000:00:15.0: >[1022:43a0] type 01 class 0x060400
265[ 0.588904] pci 0000:00:15.0: >supports D1 D2
266[ 0.588934] pci 0000:00:15.1: >[1022:43a1] type 01 class 0x060400
267[ 0.589031] pci 0000:00:15.1: >supports D1 D2
268[ 0.589063] pci 0000:00:18.0: >[1022:1400] type 00 class 0x060000
269[ 0.589078] pci 0000:00:18.1: >[1022:1401] type 00 class 0x060000
270[ 0.589092] pci 0000:00:18.2: >[1022:1402] type 00 class 0x060000
271[ 0.589106] pci 0000:00:18.3: >[1022:1403] type 00 class 0x060000
272[ 0.589123] pci 0000:00:18.4: >[1022:1404] type 00 class 0x060000
273[ 0.589137] pci 0000:00:18.5: >[1022:1405] type 00 class 0x060000
274[ 0.589221] pci 0000:01:00.0: >[197b:2363] type 00 class 0x010601
275[ 0.589337] pci 0000:01:00.0: >reg 24: [mem 0xf0010000-0xf00101ff]
276[ 0.589354] pci 0000:01:00.0: >reg 30: [mem 0xf0000000-0xf000ffff pref]
277[ 0.589436] pci 0000:01:00.0: >PME# supported from D3hot
278[ 0.589486] pci 0000:01:00.1: >[197b:0368] type 00 class 0x010185
279[ 0.589509] pci 0000:01:00.1: >reg 10: [io 0x1010-0x1017]
280[ 0.589525] pci 0000:01:00.1: >reg 14: [io 0x1020-0x1023]
281[ 0.589541] pci 0000:01:00.1: >reg 18: [io 0x1018-0x101f]
282[ 0.589557] pci 0000:01:00.1: >reg 1c: [io 0x1024-0x1027]
283[ 0.589573] pci 0000:01:00.1: >reg 20: [io 0x1000-0x100f]
284[ 0.596818] pci 0000:00:02.0: >PCI bridge to [bus 01-01]
285[ 0.602114] pci 0000:00:02.0: > bridge window [io 0x1000-0x1fff]
286[ 0.602117] pci 0000:00:02.0: > bridge window [mem 0xf0000000-0xf00fffff]
287[ 0.602175] pci 0000:00:14.4: >PCI bridge to [bus 02-02] (subtractive decode)
288[ 0.609280] pci 0000:00:14.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
289[ 0.609281] pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
290[ 0.609283] pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
291[ 0.609284] pci 0000:00:14.4: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
292[ 0.609286] pci 0000:00:14.4: > bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
293[ 0.609324] pci 0000:00:15.0: >PCI bridge to [bus 03-03]
294[ 0.614673] pci 0000:04:00.0: >[10ec:8168] type 00 class 0x020000
295[ 0.614690] pci 0000:04:00.0: >reg 10: [io 0x2000-0x20ff]
296[ 0.614717] pci 0000:04:00.0: >reg 18: [mem 0xf0104000-0xf0104fff 64bit pref]
297[ 0.614733] pci 0000:04:00.0: >reg 20: [mem 0xf0100000-0xf0103fff 64bit pref]
298[ 0.614813] pci 0000:04:00.0: >supports D1 D2
299[ 0.614815] pci 0000:04:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
300[ 0.620731] pci 0000:00:15.1: >PCI bridge to [bus 04-04]
301[ 0.626025] pci 0000:00:15.1: > bridge window [io 0x2000-0x2fff]
302[ 0.626032] pci 0000:00:15.1: > bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
303[ 0.626053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
304[ 0.626184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR2._PRT]
305[ 0.626256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT]
306[ 0.626280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR0._PRT]
307[ 0.626312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR1._PRT]
308[ 0.626365] pci0000:00: >Requesting ACPI _OSC control (0x1d)
309[ 0.632132] pci0000:00: >ACPI _OSC control (0x1d) granted
310[ 0.642046] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
311[ 0.649026] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
312[ 0.656002] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
313[ 0.662971] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
314[ 0.669940] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
315[ 0.676916] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
316[ 0.682209] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
317[ 0.689188] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
318[ 0.696202] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
319[ 0.704265] vgaarb: loaded
320[ 0.706960] vgaarb: bridge control possible 0000:00:01.0
321[ 0.712390] SCSI subsystem initialized
322[ 0.716230] libata version 3.00 loaded.
323[ 0.716248] ACPI: bus type usb registered
324[ 0.720255] usbcore: registered new interface driver usbfs
325[ 0.725725] usbcore: registered new interface driver hub
326[ 0.731105] usbcore: registered new device driver usb
327[ 0.736277] PCI: Using ACPI for IRQ routing
328[ 0.740442] PCI: pci_cache_line_size set to 64 bytes
329[ 0.740526] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
330[ 0.740528] e820: reserve RAM buffer [mem 0xbf11e000-0xbfffffff]
331[ 0.740529] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
332[ 0.740600] NetLabel: Initializing
333[ 0.743989] NetLabel: domain hash size = 128
334[ 0.748326] NetLabel: protocols = UNLABELED CIPSOv4
335[ 0.753274] NetLabel: unlabeled traffic allowed by default
336[ 0.758861] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
337[ 0.763782] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
338[ 0.771598] Switching to clocksource hpet
339[ 0.781513] AppArmor: AppArmor Filesystem Enabled
340[ 0.786232] pnp: PnP ACPI init
341[ 0.789294] ACPI: bus type pnp registered
342[ 0.793369] pnp 00:00: >[bus 00-ff]
343[ 0.793371] pnp 00:00: >[io 0x0cf8-0x0cff]
344[ 0.793373] pnp 00:00: >[io 0x0000-0x0cf7 window]
345[ 0.793375] pnp 00:00: >[io 0x03b0-0x03df window]
346[ 0.793376] pnp 00:00: >[io 0x0d00-0xffff window]
347[ 0.793378] pnp 00:00: >[mem 0x000a0000-0x000bffff]
348[ 0.793379] pnp 00:00: >[mem 0x000c0000-0x000dffff]
349[ 0.793380] pnp 00:00: >[mem 0xe0000000-0xffffffff]
350[ 0.793415] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
351[ 0.793477] pnp 00:01: >[mem 0xf024fb02-0xf0250b01]
352[ 0.793520] system 00:01: >[mem 0xf024fb02-0xf0250b01] has been reserved
353[ 0.800199] system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
354[ 0.800215] pnp 00:02: >[irq 8]
355[ 0.800217] pnp 00:02: >[io 0x0070-0x0071]
356[ 0.800238] pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
357[ 0.800247] pnp 00:03: >[io 0x0061]
358[ 0.800266] pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
359[ 0.800275] pnp 00:04: >[dma 4]
360[ 0.800277] pnp 00:04: >[io 0x0000-0x000f]
361[ 0.800278] pnp 00:04: >[io 0x0081-0x0083]
362[ 0.800279] pnp 00:04: >[io 0x0087]
363[ 0.800281] pnp 00:04: >[io 0x0089-0x008b]
364[ 0.800282] pnp 00:04: >[io 0x008f]
365[ 0.800283] pnp 00:04: >[io 0x00c0-0x00df]
366[ 0.800304] pnp 00:04: >Plug and Play ACPI device, IDs PNP0200 (active)
367[ 0.800310] pnp 00:05: >[io 0x00f0-0x00ff]
368[ 0.800313] pnp 00:05: >[irq 13]
369[ 0.800336] pnp 00:05: >Plug and Play ACPI device, IDs PNP0c04 (active)
370[ 0.800428] pnp: PnP ACPI: found 6 devices
371[ 0.804515] ACPI: ACPI bus type pnp unregistered
372[ 0.815409] pci 0000:00:02.0: >PCI bridge to [bus 01-01]
373[ 0.820708] pci 0000:00:02.0: > bridge window [io 0x1000-0x1fff]
374[ 0.826865] pci 0000:00:02.0: > bridge window [mem 0xf0000000-0xf00fffff]
375[ 0.833717] pci 0000:00:14.4: >PCI bridge to [bus 02-02]
376[ 0.839023] pci 0000:00:15.0: >PCI bridge to [bus 03-03]
377[ 0.844325] pci 0000:00:15.1: >PCI bridge to [bus 04-04]
378[ 0.849619] pci 0000:00:15.1: > bridge window [io 0x2000-0x2fff]
379[ 0.855779] pci 0000:00:15.1: > bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
380[ 0.863600] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
381[ 0.863602] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
382[ 0.863603] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
383[ 0.863605] pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
384[ 0.863606] pci_bus 0000:00: >resource 8 [mem 0xe0000000-0xffffffff]
385[ 0.863608] pci_bus 0000:01: >resource 0 [io 0x1000-0x1fff]
386[ 0.863609] pci_bus 0000:01: >resource 1 [mem 0xf0000000-0xf00fffff]
387[ 0.863611] pci_bus 0000:02: >resource 4 [io 0x0000-0x0cf7]
388[ 0.863613] pci_bus 0000:02: >resource 5 [io 0x0d00-0xffff]
389[ 0.863614] pci_bus 0000:02: >resource 6 [mem 0x000a0000-0x000bffff]
390[ 0.863615] pci_bus 0000:02: >resource 7 [mem 0x000c0000-0x000dffff]
391[ 0.863617] pci_bus 0000:02: >resource 8 [mem 0xe0000000-0xffffffff]
392[ 0.863618] pci_bus 0000:04: >resource 0 [io 0x2000-0x2fff]
393[ 0.863620] pci_bus 0000:04: >resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
394[ 0.863643] NET: Registered protocol family 2
395[ 0.868153] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
396[ 0.876415] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
397[ 0.885633] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
398[ 0.892535] TCP: Hash tables configured (established 524288 bind 65536)
399[ 0.899127] TCP: reno registered
400[ 0.902361] UDP hash table entries: 4096 (order: 5, 131072 bytes)
401[ 0.908465] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
402[ 0.915048] NET: Registered protocol family 1
403[ 0.919409] pci 0000:00:01.0: >Boot video device
404[ 0.920729] PCI: CLS 64 bytes, default 64
405[ 0.920731] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
406[ 0.927155] software IO TLB [mem 0xbb11c000-0xbf11bfff] (64MB) mapped at [ffff8800bb11c000-ffff8800bf11bfff]
407[ 0.937309] LVT offset 0 assigned for vector 0x400
408[ 0.942153] perf: AMD IBS detected (0x000000ff)
409[ 0.946907] audit: initializing netlink socket (disabled)
410[ 0.952296] type=2000 audit(1401199045.744:1): initialized
411[ 0.974254] HugeTLB registered 2 MB page size, pre-allocated 0 pages
412[ 0.982494] VFS: Disk quotas dquot_6.5.2
413[ 0.986437] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
414[ 0.993318] fuse init (API version 7.19)
415[ 0.997293] msgmni has been set to 14896
416[ 1.001608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
417[ 1.009076] io scheduler noop registered
418[ 1.012989] io scheduler deadline registered (default)
419[ 1.018129] io scheduler cfq registered
420[ 1.022066] pcieport 0000:00:02.0: >irq 40 for MSI/MSI-X
421[ 1.022141] pcieport 0000:00:15.0: >irq 41 for MSI/MSI-X
422[ 1.022225] pcieport 0000:00:15.1: >irq 42 for MSI/MSI-X
423[ 1.022290] pcieport 0000:00:02.0: >Signaling PME through PCIe PME interrupt
424[ 1.029311] pci 0000:01:00.0: >Signaling PME through PCIe PME interrupt
425[ 1.035900] pci 0000:01:00.1: >Signaling PME through PCIe PME interrupt
426[ 1.042490] pcie_pme 0000:00:02.0:pcie01: >service driver pcie_pme loaded
427[ 1.042509] pcieport 0000:00:15.0: >Signaling PME through PCIe PME interrupt
428[ 1.049529] pcie_pme 0000:00:15.0:pcie01: >service driver pcie_pme loaded
429[ 1.049547] pcieport 0000:00:15.1: >Signaling PME through PCIe PME interrupt
430[ 1.056564] pci 0000:04:00.0: >Signaling PME through PCIe PME interrupt
431[ 1.063156] pcie_pme 0000:00:15.1:pcie01: >service driver pcie_pme loaded
432[ 1.063170] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
433[ 1.068744] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
434[ 1.075431] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
435[ 1.083582] ACPI: Power Button [PWRB]
436[ 1.087281] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
437[ 1.094649] ACPI: Power Button [PWRF]
438[ 1.098338] ACPI: acpi_idle registered with cpuidle
439[ 1.099643] GHES: Failed to enable APEI firmware first mode.
440[ 1.105393] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
441[ 1.132017] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
442[ 1.139093] Linux agpgart interface v0.103
443[ 1.144265] brd: module loaded
444[ 1.147922] loop: module loaded
445[ 1.151146] ahci 0000:00:11.0: >version 3.0
446[ 1.151239] ahci 0000:00:11.0: >AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x10 impl SATA mode
447[ 1.159478] ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck led clo pio
448[ 1.166644] scsi0 : ahci
449[ 1.169305] scsi1 : ahci
450[ 1.171934] scsi2 : ahci
451[ 1.174585] scsi3 : ahci
452[ 1.177231] scsi4 : ahci
453[ 1.179887] scsi5 : ahci
454[ 1.182541] scsi6 : ahci
455[ 1.185197] scsi7 : ahci
456[ 1.187755] ata1: DUMMY
457[ 1.190192] ata2: DUMMY
458[ 1.192632] ata3: DUMMY
459[ 1.195072] ata4: DUMMY
460[ 1.197512] ata5: SATA max UDMA/133 abar m2048@0xf024f000 port 0xf024f300 irq 19
461[ 1.204873] ata6: DUMMY
462[ 1.207317] ata7: DUMMY
463[ 1.209757] ata8: DUMMY
464[ 1.212286] ahci 0000:01:00.0: >irq 43 for MSI/MSI-X
465[ 1.212355] ahci 0000:01:00.0: >AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
466[ 1.220496] ahci 0000:01:00.0: >flags: 64bit ncq pm led clo pmp pio slum part
467[ 1.227987] scsi8 : ahci
468[ 1.230642] scsi9 : ahci
469[ 1.233199] ata9: SATA max UDMA/133 abar m512@0xf0010000 port 0xf0010100 irq 43
470[ 1.240480] ata10: SATA max UDMA/133 abar m512@0xf0010000 port 0xf0010180 irq 43
471[ 1.247903] pata_acpi 0000:01:00.1: >enabling device (0000 -> 0001)
472[ 1.254362] Fixed MDIO Bus: probed
473[ 1.257776] tun: Universal TUN/TAP device driver, 1.6
474[ 1.262810] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
475[ 1.269079] PPP generic driver version 2.4.2
476[ 1.273447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
477[ 1.279967] ehci_hcd 0000:00:12.2: >EHCI Host Controller
478[ 1.285259] ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
479[ 1.292716] ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
480[ 1.301482] QUIRK: Enable AMD PLL fix
481[ 1.301490] ehci_hcd 0000:00:12.2: >debug port 1
482[ 1.306108] ehci_hcd 0000:00:12.2: >irq 17, io mem 0xf024f800
483[ 1.321758] ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
484[ 1.327608] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
485[ 1.334453] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
486[ 1.341734] usb usb1: >Product: EHCI Host Controller
487[ 1.346680] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
488[ 1.353011] usb usb1: >SerialNumber: 0000:00:12.2
489[ 1.357873] hub 1-0:1.0: >USB hub found
490[ 1.361703] hub 1-0:1.0: >5 ports detected
491[ 1.365863] ehci_hcd 0000:00:13.2: >EHCI Host Controller
492[ 1.371160] ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
493[ 1.378616] ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
494[ 1.387381] ehci_hcd 0000:00:13.2: >debug port 1
495[ 1.391996] ehci_hcd 0000:00:13.2: >irq 17, io mem 0xf024f900
496[ 1.409448] ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
497[ 1.415280] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
498[ 1.422122] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
499[ 1.429403] usb usb2: >Product: EHCI Host Controller
500[ 1.434351] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
501[ 1.440680] usb usb2: >SerialNumber: 0000:00:13.2
502[ 1.445536] hub 2-0:1.0: >USB hub found
503[ 1.449362] hub 2-0:1.0: >5 ports detected
504[ 1.453509] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
505[ 1.459699] ohci_hcd 0000:00:12.0: >OHCI Host Controller
506[ 1.465004] ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
507[ 1.472503] ohci_hcd 0000:00:12.0: >irq 18, io mem 0xf024c000
508[ 1.529043] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
509[ 1.536303] ata5.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
510[ 1.537006] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
511[ 1.537009] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
512[ 1.537013] usb usb3: >Product: OHCI Host Controller
513[ 1.537015] usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
514[ 1.537020] usb usb3: >SerialNumber: 0000:00:12.0
515[ 1.537295] hub 3-0:1.0: >USB hub found
516[ 1.537306] hub 3-0:1.0: >5 ports detected
517[ 1.537490] ohci_hcd 0000:00:13.0: >OHCI Host Controller
518[ 1.537498] ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 4
519[ 1.537524] ohci_hcd 0000:00:13.0: >irq 18, io mem 0xf024d000
520[ 1.564911] ata10: SATA link down (SStatus 0 SControl 300)
521[ 1.596726] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
522[ 1.596730] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
523[ 1.596734] usb usb4: >Product: OHCI Host Controller
524[ 1.596737] usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
525[ 1.596739] usb usb4: >SerialNumber: 0000:00:13.0
526[ 1.596926] hub 4-0:1.0: >USB hub found
527[ 1.596934] hub 4-0:1.0: >5 ports detected
528[ 1.597064] ohci_hcd 0000:00:14.5: >OHCI Host Controller
529[ 1.597071] ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 5
530[ 1.597088] ohci_hcd 0000:00:14.5: >irq 18, io mem 0xf024e000
531[ 1.656503] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
532[ 1.656507] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
533[ 1.656509] usb usb5: >Product: OHCI Host Controller
534[ 1.656512] usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
535[ 1.656514] usb usb5: >SerialNumber: 0000:00:14.5
536[ 1.656688] hub 5-0:1.0: >USB hub found
537[ 1.656696] hub 5-0:1.0: >2 ports detected
538[ 1.656812] uhci_hcd: USB Universal Host Controller Interface driver
539[ 1.656884] xhci_hcd 0000:00:10.0: >xHCI Host Controller
540[ 1.656895] xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 6
541[ 1.657126] xhci_hcd 0000:00:10.0: >irq 18, io mem 0xf0248000
542[ 1.657226] xhci_hcd 0000:00:10.0: >irq 44 for MSI/MSI-X
543[ 1.657235] xhci_hcd 0000:00:10.0: >irq 45 for MSI/MSI-X
544[ 1.657248] xhci_hcd 0000:00:10.0: >irq 46 for MSI/MSI-X
545[ 1.657259] xhci_hcd 0000:00:10.0: >irq 47 for MSI/MSI-X
546[ 1.657269] xhci_hcd 0000:00:10.0: >irq 48 for MSI/MSI-X
547[ 1.657429] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0002
548[ 1.657433] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
549[ 1.657436] usb usb6: >Product: xHCI Host Controller
550[ 1.657438] usb usb6: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
551[ 1.657441] usb usb6: >SerialNumber: 0000:00:10.0
552[ 1.657633] xHCI xhci_add_endpoint called for root hub
553[ 1.657634] xHCI xhci_check_bandwidth called for root hub
554[ 1.657672] hub 6-0:1.0: >USB hub found
555[ 1.657683] hub 6-0:1.0: >2 ports detected
556[ 1.657782] xhci_hcd 0000:00:10.0: >xHCI Host Controller
557[ 1.657789] xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 7
558[ 1.660518] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0003
559[ 1.660521] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
560[ 1.660524] usb usb7: >Product: xHCI Host Controller
561[ 1.660530] usb usb7: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
562[ 1.660532] usb usb7: >SerialNumber: 0000:00:10.0
563[ 1.660678] xHCI xhci_add_endpoint called for root hub
564[ 1.660679] xHCI xhci_check_bandwidth called for root hub
565[ 1.660719] hub 7-0:1.0: >USB hub found
566[ 1.660727] hub 7-0:1.0: >2 ports detected
567[ 1.680478] usb 1-2: >new high-speed USB device number 2 using ehci_hcd
568[ 1.812984] usb 1-2: >New USB device found, idVendor=0457, idProduct=0151
569[ 1.812988] usb 1-2: >New USB device strings: Mfr=0, Product=2, SerialNumber=3
570[ 1.812990] usb 1-2: >Product: USB Mass Storage Device
571[ 1.812993] usb 1-2: >SerialNumber: a5a33ce13d26a5
572[ 1.843052] ata5.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
573[ 1.843137] ata9: SATA link down (SStatus 0 SControl 300)
574[ 1.856655] ata5.00: configured for UDMA/133
575[ 1.856669] xhci_hcd 0000:00:10.1: >xHCI Host Controller
576[ 1.856675] xhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 8
577[ 1.856905] xhci_hcd 0000:00:10.1: >irq 17, io mem 0xf024a000
578[ 1.856977] xhci_hcd 0000:00:10.1: >irq 49 for MSI/MSI-X
579[ 1.856981] xhci_hcd 0000:00:10.1: >irq 50 for MSI/MSI-X
580[ 1.856985] xhci_hcd 0000:00:10.1: >irq 51 for MSI/MSI-X
581[ 1.856988] xhci_hcd 0000:00:10.1: >irq 52 for MSI/MSI-X
582[ 1.856992] xhci_hcd 0000:00:10.1: >irq 53 for MSI/MSI-X
583[ 1.857091] usb usb8: >New USB device found, idVendor=1d6b, idProduct=0002
584[ 1.857092] usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
585[ 1.857094] usb usb8: >Product: xHCI Host Controller
586[ 1.857095] usb usb8: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
587[ 1.857095] usb usb8: >SerialNumber: 0000:00:10.1
588[ 1.857187] xHCI xhci_add_endpoint called for root hub
589[ 1.857188] xHCI xhci_check_bandwidth called for root hub
590[ 1.857209] hub 8-0:1.0: >USB hub found
591[ 1.857215] hub 8-0:1.0: >2 ports detected
592[ 1.857267] xhci_hcd 0000:00:10.1: >xHCI Host Controller
593[ 1.857269] xhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 9
594[ 1.860281] usb usb9: >New USB device found, idVendor=1d6b, idProduct=0003
595[ 1.860282] usb usb9: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
596[ 1.860283] usb usb9: >Product: xHCI Host Controller
597[ 1.860284] usb usb9: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
598[ 1.860285] usb usb9: >SerialNumber: 0000:00:10.1
599[ 1.860337] xHCI xhci_add_endpoint called for root hub
600[ 1.860338] xHCI xhci_check_bandwidth called for root hub
601[ 1.860354] hub 9-0:1.0: >USB hub found
602[ 1.860358] hub 9-0:1.0: >2 ports detected
603[ 1.931568] Refined TSC clocksource calibration: 3793.097 MHz.
604[ 1.931571] Switching to clocksource tsc
605[ 1.977815] scsi 4:0:0:0: >Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
606[ 1.986091] sd 4:0:0:0: >Attached scsi generic sg0 type 0
607[ 1.986132] sd 4:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
608[ 1.986159] sd 4:0:0:0: >[sda] Write Protect is off
609[ 1.986161] sd 4:0:0:0: >[sda] Mode Sense: 00 3a 00 00
610[ 1.986172] sd 4:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
611[ 2.015486] usbcore: registered new interface driver libusual
612[ 2.021242] i8042: PNP: No PS/2 controller found. Probing ports directly.
613[ 2.028038] Initializing USB Mass Storage driver...
614[ 2.033069] usb-storage 1-2:1.0: >Quirks match for vid 0457 pid 0151: 80
615[ 2.039829] scsi10 : usb-storage 1-2:1.0
616[ 2.041775] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
617[ 2.042463] sd 4:0:0:0: >[sda] Attached SCSI disk
618[ 2.053329] usbcore: registered new interface driver usb-storage
619[ 2.059309] USB Mass Storage support registered.
620[ 2.278400] serio: i8042 KBD port at 0x60,0x64 irq 1
621[ 2.283485] mousedev: PS/2 mouse device common for all mice
622[ 2.289204] rtc_cmos 00:02: >RTC can wake from S4
623[ 2.294052] rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
624[ 2.300224] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
625[ 2.306442] device-mapper: uevent: version 1.0.3
626[ 2.311168] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
627[ 2.319615] cpuidle: using governor ladder
628[ 2.323806] cpuidle: using governor menu
629[ 2.327716] EFI Variables Facility v0.08 2004-May-17
630[ 2.332700] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
631[ 2.341507] ashmem: initialized
632[ 2.344803] TCP: cubic registered
633[ 2.348178] NET: Registered protocol family 10
634[ 2.352739] NET: Registered protocol family 17
635[ 2.357168] Key type dns_resolver registered
636[ 2.361608] PM: Hibernation image not present or could not be loaded.
637[ 2.361617] registered taskstats version 1
638[ 2.367916] Key type trusted registered
639[ 2.373273] Key type encrypted registered
640[ 2.379058] Magic number: 14:842:989
641[ 2.382841] machinecheck machinecheck2: >hash matches
642[ 2.387898] memory memory32: >hash matches
643[ 2.392041] rtc_cmos 00:02: >setting system clock to 2014-05-27 13:57:28 UTC (1401199048)
644[ 2.400300] powernow-k8: Found 1 AMD A10-5800K APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00)
645[ 2.410483] powernow-k8: Core Performance Boosting: on.
646[ 2.415795] powernow-k8: 0 : pstate 0 (3800 MHz)
647[ 2.420652] powernow-k8: 1 : pstate 1 (3400 MHz)
648[ 2.425515] powernow-k8: 2 : pstate 2 (2900 MHz)
649[ 2.430386] powernow-k8: 3 : pstate 3 (2400 MHz)
650[ 2.435256] powernow-k8: 4 : pstate 4 (1900 MHz)
651[ 2.440117] powernow-k8: 5 : pstate 5 (1400 MHz)
652[ 2.445311] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
653[ 2.451292] EDD information not available.
654[ 2.458329] Freeing unused kernel memory: 928k freed
655[ 2.463470] Write protecting the kernel read-only data: 12288k
656[ 2.475929] Freeing unused kernel memory: 1472k freed
657[ 2.486284] Freeing unused kernel memory: 1124k freed
658[ 2.507588] udevd[119]: starting version 175
659[ 2.539142] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
660[ 2.544784] sdhci: Secure Digital Host Controller Interface driver
661[ 2.548128] r8169 0000:04:00.0: >irq 54 for MSI/MSI-X
662[ 2.548304] r8169 0000:04:00.0: >eth0: RTL8168f/8111f at 0xffffc90001794000, 08:60:6e:d4:a8:d8, XID 08000800 IRQ 54
663[ 2.548306] r8169 0000:04:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
664[ 2.570035] sdhci: Copyright(c) Pierre Ossman
665[ 2.571080] scsi11 : pata_jmicron
666[ 2.571231] scsi12 : pata_jmicron
667[ 2.571277] ata11: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 19
668[ 2.571278] ata12: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 19
669[ 2.733190] ata11.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.07, max UDMA/33
670[ 2.753127] ata11.00: configured for UDMA/33
671[ 2.761871] scsi 11:0:0:0: >CD-ROM _NEC DVD_RW ND-3520AW 3.07 PQ: 0 ANSI: 5
672[ 2.772150] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
673[ 2.778919] cdrom: Uniform CD-ROM driver Revision: 3.20
674[ 2.784324] sr 11:0:0:0: >Attached scsi CD-ROM sr0
675[ 2.784525] sr 11:0:0:0: >Attached scsi generic sg1 type 5
676[ 2.929590] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
677[ 2.936471] EXT4-fs (sda7): write access will be enabled during recovery
678[ 2.955631] sdhci-pci 0000:00:14.7: >SDHCI controller found [1022:7806] (rev 0)
679[ 2.963049] mmc0: no vmmc regulator found
680[ 2.967110] Registered led device: mmc0::
681[ 2.995751] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
682[ 3.048797] scsi 10:0:0:0: >Direct-Access USB 2.0 Flash Disk 0.00 PQ: 0 ANSI: 2
683[ 3.057665] sd 10:0:0:0: >Attached scsi generic sg2 type 0
684[ 3.058932] sd 10:0:0:0: >[sdb] 512000 512-byte logical blocks: (262 MB/250 MiB)
685[ 3.059538] sd 10:0:0:0: >[sdb] Write Protect is off
686[ 3.059540] sd 10:0:0:0: >[sdb] Mode Sense: 00 00 00 00
687[ 3.060179] sd 10:0:0:0: >[sdb] Asking for cache data failed
688[ 3.060181] sd 10:0:0:0: >[sdb] Assuming drive cache: write through
689[ 3.062664] sd 10:0:0:0: >[sdb] Asking for cache data failed
690[ 3.062665] sd 10:0:0:0: >[sdb] Assuming drive cache: write through
691[ 3.063418] sdb: sdb1
692[ 3.106302] sd 10:0:0:0: >[sdb] Asking for cache data failed
693[ 3.111995] sd 10:0:0:0: >[sdb] Assuming drive cache: write through
694[ 3.118310] sd 10:0:0:0: >[sdb] Attached SCSI removable disk
695[ 3.697481] EXT4-fs (sda7): recovery complete
696[ 3.705716] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
697[ 13.936793] Adding 979928k swap on /dev/sda6. Priority:-1 extents:1 across:979928k
698[ 13.948682] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
699[ 13.969696] udevd[363]: starting version 175
700[ 14.024291] piix4_smbus 0000:00:14.0: >SMBus Host Controller at 0xb00, revision 0
701[ 14.024562] [drm] Initialized drm 1.1.0 20060810
702[ 14.027268] lp: driver loaded but no devices found
703[ 14.032279] [drm] radeon defaulting to kernel modesetting.
704[ 14.032282] [drm] radeon kernel modesetting enabled.
705[ 14.032537] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1002:0x9901).
706[ 14.032566] [drm] register mmio base: 0xF0200000
707[ 14.032567] [drm] register mmio size: 262144
708[ 14.032616] ATOM BIOS: 113
709[ 14.032637] radeon 0000:00:01.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
710[ 14.032640] radeon 0000:00:01.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
711[ 14.033166] [drm] Detected VRAM RAM=512M, BAR=256M
712[ 14.033169] [drm] RAM width 64bits DDR
713[ 14.035705] [TTM] Zone kernel: Available graphics memory: 3815270 kiB
714[ 14.035708] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
715[ 14.035710] [TTM] Initializing pool allocator
716[ 14.035715] [TTM] Initializing DMA pool allocator
717[ 14.035740] [drm] radeon: 512M of VRAM memory ready
718[ 14.035741] [drm] radeon: 512M of GTT memory ready.
719[ 14.035756] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
720[ 14.035758] [drm] Driver supports precise vblank timestamp query.
721[ 14.035793] radeon 0000:00:01.0: >irq 55 for MSI/MSI-X
722[ 14.035802] radeon 0000:00:01.0: >radeon: using MSI.
723[ 14.036348] [drm] radeon: irq initialized.
724[ 14.036353] [drm] GART: num cpu pages 131072, num gpu pages 131072
725[ 14.037173] [drm] Loading ARUBA Microcode
726[ 14.073160] microcode: CPU0: patch_level=0x0600110f
727[ 14.192775] microcode: CPU0: new patch_level=0x06001119
728[ 14.192815] microcode: CPU1: patch_level=0x0600110f
729[ 14.209194] microcode: CPU1: new patch_level=0x06001119
730[ 14.209634] microcode: CPU2: patch_level=0x0600110f
731[ 14.211664] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
732[ 14.225421] microcode: CPU2: new patch_level=0x06001119
733[ 14.225436] microcode: CPU3: patch_level=0x0600110f
734[ 14.225462] radeon 0000:00:01.0: >WB enabled
735[ 14.225466] radeon 0000:00:01.0: >fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880211741c00
736[ 14.225469] radeon 0000:00:01.0: >fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff880211741c04
737[ 14.225472] radeon 0000:00:01.0: >fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff880211741c08
738[ 14.241577] microcode: CPU3: new patch_level=0x06001119
739[ 14.242228] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
740[ 14.244466] [drm] ring test on 0 succeeded in 2 usecs
741[ 14.245392] [drm] ib test on ring 0 succeeded in 0 usecs
742[ 14.247371] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
743[ 14.252380] kvm: Nested Virtualization enabled
744[ 14.252384] kvm: Nested Paging enabled
745[ 14.260479] [drm] Radeon Display Connectors
746[ 14.260483] [drm] Connector 0:
747[ 14.260484] [drm] HDMI-A-1
748[ 14.260485] [drm] HPD1
749[ 14.260487] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
750[ 14.260488] [drm] Encoders:
751[ 14.260489] [drm] DFP1: INTERNAL_UNIPHY2
752[ 14.260490] [drm] Connector 1:
753[ 14.260491] [drm] VGA-1
754[ 14.260492] [drm] HPD2
755[ 14.260494] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
756[ 14.260495] [drm] Encoders:
757[ 14.260496] [drm] CRT1: INTERNAL_UNIPHY2
758[ 14.260497] [drm] CRT1: NUTMEG
759[ 14.260498] [drm] Connector 2:
760[ 14.260500] [drm] DVI-D-1
761[ 14.260500] [drm] HPD3
762[ 14.260502] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
763[ 14.260503] [drm] Encoders:
764[ 14.260504] [drm] DFP2: INTERNAL_UNIPHY
765[ 14.303133] init: failsafe main process (652) killed by TERM signal
766[ 14.312486] [drm] Internal thermal controller without fan control
767[ 14.312506] [drm] radeon: power management initialized
768[ 14.349473] Bluetooth: Core ver 2.16
769[ 14.349495] NET: Registered protocol family 31
770[ 14.349497] Bluetooth: HCI device and connection manager initialized
771[ 14.349543] Bluetooth: HCI socket layer initialized
772[ 14.349544] Bluetooth: L2CAP socket layer initialized
773[ 14.349549] Bluetooth: SCO socket layer initialized
774[ 14.352176] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
775[ 14.352179] Bluetooth: BNEP filters: protocol multicast
776[ 14.360457] Bluetooth: RFCOMM TTY layer initialized
777[ 14.360471] Bluetooth: RFCOMM socket layer initialized
778[ 14.360473] Bluetooth: RFCOMM ver 1.11
779[ 14.395045] ppdev: user-space parallel port driver
780[ 14.507695] r8169 0000:04:00.0: >eth4: link down
781[ 14.507706] r8169 0000:04:00.0: >eth4: link down
782[ 14.508251] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
783[ 14.508423] [drm] fb mappable at 0xE1144000
784[ 14.508427] [drm] vram apper at 0xE0000000
785[ 14.508429] [drm] size 5242880
786[ 14.508430] [drm] fb depth is 24
787[ 14.508430] [drm] pitch is 5120
788[ 14.508500] fbcon: radeondrmfb (fb0) is primary device
789[ 14.508761] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
790[ 14.582834] Console: switching to colour frame buffer device 160x64
791[ 14.585306] fb0: radeondrmfb frame buffer device
792[ 14.585308] drm: registered panic notifier
793[ 14.585313] [drm] Initialized radeon 2.18.0 20080528 for 0000:00:01.0 on minor 0
794[ 14.585568] hda-intel: Force to non-snoop mode
795[ 14.585617] snd_hda_intel 0000:00:01.1: >irq 56 for MSI/MSI-X
796[ 14.610553] init: plymouth main process (282) killed by ABRT signal
797[ 14.610952] init: plymouth-splash main process (781) terminated with status 2
798[ 15.102545] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
799[ 15.102622] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
800[ 15.157681] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
801[ 15.157777] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
802[ 15.157844] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
803[ 15.157906] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
804[ 15.157969] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
805[ 15.158030] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
806[ 15.158097] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
807[ 15.158162] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
808[ 16.108847] init: plymouth-stop pre-start process (1397) terminated with status 1
809[ 17.135985] r8169 0000:04:00.0: >eth4: link up
810[ 17.137221] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
811[ 20.534271] pool[1973]: segfault at 0 ip 000000000042e62d sp 00007f03deffc520 error 4
812[ 20.534275] pool[1787]: segfault at 0 ip 000000000042e62d sp 00007f03e4cad520 error 4 in udisksd[400000+45000]
813[ 20.534280] in udisksd[400000+45000]
814[ 20.534282]