blob: 81ea291677cbfef360e08661ec09395614067d84 [file] [log] [blame]
Michał Żygowski3c73bc62018-05-08 16:29:23 +02001[ 0.000000] Linux version 4.9.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u1 (2017-12-23)
2[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=/dev/sda1 ro console=ttyS0,115200 earlyprint=serial,ttyS0,115200 initrd=http://ftp.nl.debian.org/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/initrd.gz quiet
3[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
4[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
5[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
6[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
7[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
8[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
9[ 0.000000] e820: BIOS-provided physical RAM map:
10[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdb5fff] usable
14[ 0.000000] BIOS-e820: [mem 0x00000000cfdb6000-0x00000000cfffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012effffff] usable
18[ 0.000000] NX (Execute Disable) protection: active
19[ 0.000000] SMBIOS 2.7 present.
20[ 0.000000] DMI: PC Engines apu2/apu2, BIOS 4.7 01/15/2018
21[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
22[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
23[ 0.000000] e820: last_pfn = 0x12f000 max_arch_pfn = 0x400000000
24[ 0.000000] MTRR default type: uncachable
25[ 0.000000] MTRR fixed ranges enabled:
26[ 0.000000] 00000-9FFFF write-back
27[ 0.000000] A0000-BFFFF uncachable
28[ 0.000000] C0000-FFFFF write-back
29[ 0.000000] MTRR variable ranges enabled:
30[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
31[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
32[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
33[ 0.000000] 3 disabled
34[ 0.000000] 4 disabled
35[ 0.000000] 5 disabled
36[ 0.000000] 6 base 00FF800000 mask FFFF800000 write-protect
37[ 0.000000] 7 disabled
38[ 0.000000] TOM2: 000000012f000000 aka 4848M
39[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
40[ 0.000000] e820: last_pfn = 0xcfdb6 max_arch_pfn = 0x400000000
41[ 0.000000] found SMP MP-table at [mem 0x000f5fe0-0x000f5fef] mapped at [ffff9a62000f5fe0]
42[ 0.000000] Base memory trampoline at [ffff9a6200099000] 99000 size 24576
43[ 0.000000] Using GB pages for direct mapping
44[ 0.000000] BRK [0x5372f000, 0x5372ffff] PGTABLE
45[ 0.000000] BRK [0x53730000, 0x53730fff] PGTABLE
46[ 0.000000] BRK [0x53731000, 0x53731fff] PGTABLE
47[ 0.000000] BRK [0x53732000, 0x53732fff] PGTABLE
48[ 0.000000] BRK [0x53733000, 0x53733fff] PGTABLE
49[ 0.000000] RAMDISK: [mem 0x35d9d000-0x36ec5fff]
50[ 0.000000] ACPI: Early table checksum verification disabled
51[ 0.000000] ACPI: RSDP 0x00000000000F61B0 000024 (v02 CORE )
52[ 0.000000] ACPI: XSDT 0x00000000CFDC70E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
53[ 0.000000] ACPI: FACP 0x00000000CFDC8900 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
54[ 0.000000] ACPI: DSDT 0x00000000CFDC7280 001677 (v02 AMD COREBOOT 00010001 INTL 20161222)
55[ 0.000000] ACPI: FACS 0x00000000CFDC7240 000040
56[ 0.000000] ACPI: SSDT 0x00000000CFDC8A00 0001EA (v02 CORE COREBOOT 0000002A CORE 0000002A)
57[ 0.000000] ACPI: TCPA 0x00000000CFDC8BF0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: APIC 0x00000000CFDC8C30 00007E (v01 CORE COREBOOT 00000000 CORE 00000000)
59[ 0.000000] ACPI: HEST 0x00000000CFDC8CB0 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: SSDT 0x00000000CFDC8E80 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000)
61[ 0.000000] ACPI: SSDT 0x00000000CFDCD730 0007C8 (v01 AMD AGESA 00000001 AMD 00000001)
62[ 0.000000] ACPI: HPET 0x00000000CFDCDF00 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012effffff]
66[ 0.000000] NODE_DATA(0) allocated [mem 0x12eff9000-0x12effdfff]
67[ 0.000000] Zone ranges:
68[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
69[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
70[ 0.000000] Normal [mem 0x0000000100000000-0x000000012effffff]
71[ 0.000000] Device empty
72[ 0.000000] Movable zone start for each node
73[ 0.000000] Early memory node ranges
74[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
75[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfdb5fff]
76[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012effffff]
77[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff]
78[ 0.000000] On node 0 totalpages: 1043796
79[ 0.000000] DMA zone: 64 pages used for memmap
80[ 0.000000] DMA zone: 21 pages reserved
81[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
82[ 0.000000] DMA32 zone: 13239 pages used for memmap
83[ 0.000000] DMA32 zone: 847286 pages, LIFO batch:31
84[ 0.000000] Normal zone: 3008 pages used for memmap
85[ 0.000000] Normal zone: 192512 pages, LIFO batch:31
86[ 0.000000] ACPI: PM-Timer IO Port: 0x818
87[ 0.000000] ACPI: Local APIC address 0xfee00000
88[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
89[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
90[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
92[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
93[ 0.000000] ACPI: IRQ0 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
98[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] PM: Registered nosave memory: [mem 0xcfdb6000-0xcfffffff]
103[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
104[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
105[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
106[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
107[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
108[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
109[ 0.000000] Booting paravirtualized kernel on bare hardware
110[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
111[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
112[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9a632ec00000 s103448 r8192 d31720 u524288
113[ 0.000000] pcpu-alloc: s103448 r8192 d31720 u524288 alloc=1*2097152
114[ 0.000000] pcpu-alloc: [0] 0 1 2 3
115[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027464
116[ 0.000000] Policy zone: Normal
117[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=/dev/sda1 ro console=ttyS0,115200 earlyprint=serial,ttyS0,115200 initrd=http://ftp.nl.debian.org/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/initrd.gz quiet
118[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
119[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
120[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
121[ 0.000000] Memory: 4009796K/4175184K available (6195K kernel code, 1137K rwdata, 2856K rodata, 1396K init, 688K bss, 165388K reserved, 0K cma-reserved)
122[ 0.000000] Hierarchical RCU implementation.
123[ 0.000000] Build-time adjustment of leaf fanout to 64.
124[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
125[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
126[ 0.000000] NR_IRQS:33024 nr_irqs:1000 16
127[ 0.000000] spurious 8259A interrupt: IRQ7.
128[ 0.000000] Console: colour dummy device 80x25
129[ 0.000000] console [ttyS0] enabled
130[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
131[ 0.000000] hpet clockevent registered
132[ 0.000000] tsc: Fast TSC calibration using PIT
133[ 0.000000] tsc: Detected 998.115 MHz processor
134[ 0.000183] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.23 BogoMIPS (lpj=3992460)
135[ 0.000207] pid_max: default: 32768 minimum: 301
136[ 0.000260] ACPI: Core revision 20160831
137[ 0.026910] ACPI: 4 ACPI AML tables successfully acquired and loaded
138[ 0.027145] Security Framework initialized
139[ 0.027151] Yama: disabled by default; enable with sysctl kernel.yama.*
140[ 0.027171] AppArmor: AppArmor disabled by boot time parameter
141[ 0.028186] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
142[ 0.032503] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
143[ 0.034616] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
144[ 0.034634] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
145[ 0.035947] CPU: Physical Processor ID: 0
146[ 0.035950] CPU: Processor Core ID: 0
147[ 0.035954] mce: CPU supports 6 MCE banks
148[ 0.035971] LVT offset 1 assigned for vector 0xf9
149[ 0.035987] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
150[ 0.035990] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
151[ 0.039272] Freeing SMP alternatives memory: 24K
152[ 0.045520] ftrace: allocating 25200 entries in 99 pages
153[ 0.092076] smpboot: Max logical packages: 1
154[ 0.092727] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
155[ 0.239820] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
156[ 0.239832] Performance Events: AMD PMU driver.
157[ 0.239843] ... version: 0
158[ 0.239845] ... bit width: 48
159[ 0.239847] ... generic registers: 4
160[ 0.239851] ... value mask: 0000ffffffffffff
161[ 0.239866] ... max period: 00007fffffffffff
162[ 0.239869] ... fixed-purpose events: 0
163[ 0.239883] ... event mask: 000000000000000f
164[ 0.242368] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
165[ 0.242978] x86: Booting SMP configuration:
166[ 0.242981] .... node #0, CPUs: #1 #2 #3
167[ 0.252191] x86: Booted up 1 node, 4 CPUs
168[ 0.252200] smpboot: Total of 4 processors activated (7984.92 BogoMIPS)
169[ 0.255392] devtmpfs: initialized
170[ 0.255798] x86/mm: Memory block size: 128MB
171[ 0.272436] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
172[ 0.272469] futex hash table entries: 1024 (order: 4, 65536 bytes)
173[ 0.272654] pinctrl core: initialized pinctrl subsystem
174[ 0.273223] NET: Registered protocol family 16
175[ 0.285735] cpuidle: using governor ladder
176[ 0.301725] cpuidle: using governor menu
177[ 0.301911] ACPI: bus type PCI registered
178[ 0.301915] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
179[ 0.302198] PCI: Using configuration type 1 for base access
180[ 0.302200] PCI: Using configuration type 1 for extended access
181[ 0.318302] HugeTLB registered 1 GB page size, pre-allocated 0 pages
182[ 0.318305] HugeTLB registered 2 MB page size, pre-allocated 0 pages
183[ 0.319773] ACPI: Added _OSI(Module Device)
184[ 0.319776] ACPI: Added _OSI(Processor Device)
185[ 0.319779] ACPI: Added _OSI(3.0 _SCP Extensions)
186[ 0.319781] ACPI: Added _OSI(Processor Aggregator Device)
187[ 0.320440] ACPI: Executed 2 blocks of module-level executable AML code
188[ 0.341635] ACPI: Interpreter enabled
189[ 0.341721] ACPI: (supports S0 S1 S4 S5)
190[ 0.341724] ACPI: Using IOAPIC for interrupt routing
191[ 0.341793] HEST: Table parsing has been initialized.
192[ 0.341831] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
193[ 0.356078] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
194[ 0.356095] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
195[ 0.356490] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
196[ 0.356647] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
197[ 0.357520] PCI host bridge to bus 0000:00
198[ 0.357526] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
199[ 0.357531] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
200[ 0.357536] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
201[ 0.357541] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
202[ 0.357545] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
203[ 0.357551] pci_bus 0000:00: root bus resource [bus 00-ff]
204[ 0.357573] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
205[ 0.357949] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
206[ 0.358330] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
207[ 0.358480] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
208[ 0.358663] pci 0000:00:02.2: System wakeup disabled by ACPI
209[ 0.358804] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
210[ 0.358920] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
211[ 0.359099] pci 0000:00:02.3: System wakeup disabled by ACPI
212[ 0.359296] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
213[ 0.359502] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
214[ 0.359712] pci 0000:00:02.4: System wakeup disabled by ACPI
215[ 0.359886] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
216[ 0.359911] pci 0000:00:08.0: reg 0x10: [mem 0xf7f00000-0xf7f1ffff 64bit pref]
217[ 0.359923] pci 0000:00:08.0: reg 0x18: [mem 0xf7d00000-0xf7dfffff]
218[ 0.359934] pci 0000:00:08.0: reg 0x1c: [mem 0xf7f24000-0xf7f24fff]
219[ 0.359945] pci 0000:00:08.0: reg 0x20: [mem 0xf7e00000-0xf7efffff]
220[ 0.359957] pci 0000:00:08.0: reg 0x24: [mem 0xf7f20000-0xf7f21fff]
221[ 0.360428] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
222[ 0.360474] pci 0000:00:10.0: reg 0x10: [mem 0xf7f22000-0xf7f23fff 64bit]
223[ 0.360657] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
224[ 0.360883] pci 0000:00:10.0: System wakeup disabled by ACPI
225[ 0.361109] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
226[ 0.361136] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
227[ 0.361149] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
228[ 0.361163] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
229[ 0.361176] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
230[ 0.361189] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
231[ 0.361203] pci 0000:00:11.0: reg 0x24: [mem 0xf7f25000-0xf7f253ff]
232[ 0.361241] pci 0000:00:11.0: set SATA to AHCI mode
233[ 0.361324] pci 0000:00:11.0: PME# supported from D3hot
234[ 0.361737] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
235[ 0.361762] pci 0000:00:13.0: reg 0x10: [mem 0xf7f26000-0xf7f260ff]
236[ 0.361961] pci 0000:00:13.0: supports D1 D2
237[ 0.361965] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
238[ 0.362172] pci 0000:00:13.0: System wakeup disabled by ACPI
239[ 0.362297] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
240[ 0.362808] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
241[ 0.363225] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
242[ 0.363251] pci 0000:00:14.7: reg 0x10: [mem 0xf7f27000-0xf7f270ff 64bit]
243[ 0.363616] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
244[ 0.363999] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
245[ 0.364505] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
246[ 0.364922] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
247[ 0.365308] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
248[ 0.365682] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
249[ 0.366262] pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
250[ 0.366296] pci 0000:01:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff]
251[ 0.366360] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f]
252[ 0.366380] pci 0000:01:00.0: reg 0x1c: [mem 0xf7a20000-0xf7a23fff]
253[ 0.366613] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
254[ 0.376127] pci 0000:00:02.2: PCI bridge to [bus 01]
255[ 0.376137] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
256[ 0.376144] pci 0000:00:02.2: bridge window [mem 0xf7a00000-0xf7afffff]
257[ 0.376317] pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
258[ 0.376380] pci 0000:02:00.0: reg 0x10: [mem 0xf7b00000-0xf7b1ffff]
259[ 0.376414] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f]
260[ 0.376464] pci 0000:02:00.0: reg 0x1c: [mem 0xf7b20000-0xf7b23fff]
261[ 0.376639] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
262[ 0.388126] pci 0000:00:02.3: PCI bridge to [bus 02]
263[ 0.388136] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
264[ 0.388143] pci 0000:00:02.3: bridge window [mem 0xf7b00000-0xf7bfffff]
265[ 0.388344] pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
266[ 0.388408] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
267[ 0.388444] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
268[ 0.388491] pci 0000:03:00.0: reg 0x1c: [mem 0xf7c20000-0xf7c23fff]
269[ 0.388692] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
270[ 0.400147] pci 0000:00:02.4: PCI bridge to [bus 03]
271[ 0.400157] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
272[ 0.400163] pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
273[ 0.401118] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
274[ 0.401349] ACPI: PCI Interrupt Link [INTB] (IRQs *3 4 5 7 10 11 12 15)
275[ 0.401546] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
276[ 0.401771] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
277[ 0.401966] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
278[ 0.402220] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
279[ 0.402439] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
280[ 0.402632] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
281[ 0.403140] ACPI: Enabled 4 GPEs in block 00 to 1F
282[ 0.403704] vgaarb: loaded
283[ 0.404039] PCI: Using ACPI for IRQ routing
284[ 0.404044] PCI: pci_cache_line_size set to 64 bytes
285[ 0.404197] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
286[ 0.404230] e820: reserve RAM buffer [mem 0xcfdb6000-0xcfffffff]
287[ 0.404234] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
288[ 0.405073] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
289[ 0.405083] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
290[ 0.407159] clocksource: Switched to clocksource hpet
291[ 0.440811] VFS: Disk quotas dquot_6.6.0
292[ 0.440975] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
293[ 0.441388] pnp: PnP ACPI init
294[ 0.442245] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
295[ 0.442259] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
296[ 0.442368] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
297[ 0.443106] pnp: PnP ACPI: found 2 devices
298[ 0.458219] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
299[ 0.458307] pci 0000:00:02.2: PCI bridge to [bus 01]
300[ 0.458315] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
301[ 0.458324] pci 0000:00:02.2: bridge window [mem 0xf7a00000-0xf7afffff]
302[ 0.458337] pci 0000:00:02.3: PCI bridge to [bus 02]
303[ 0.458342] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
304[ 0.458350] pci 0000:00:02.3: bridge window [mem 0xf7b00000-0xf7bfffff]
305[ 0.458363] pci 0000:00:02.4: PCI bridge to [bus 03]
306[ 0.458368] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
307[ 0.458375] pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
308[ 0.458423] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
309[ 0.458427] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
310[ 0.458432] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
311[ 0.458438] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
312[ 0.458471] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
313[ 0.458476] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
314[ 0.458480] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
315[ 0.458485] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
316[ 0.458489] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
317[ 0.458494] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
318[ 0.458498] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
319[ 0.458804] NET: Registered protocol family 2
320[ 0.459781] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
321[ 0.460156] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
322[ 0.460515] TCP: Hash tables configured (established 32768 bind 32768)
323[ 0.460638] UDP hash table entries: 2048 (order: 4, 65536 bytes)
324[ 0.460720] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
325[ 0.460894] NET: Registered protocol family 1
326[ 0.462135] PCI: CLS 64 bytes, default 64
327[ 0.462439] Unpacking initramfs...
328[ 1.844416] Freeing initrd memory: 17572K
329[ 1.844520] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
330[ 1.844528] software IO TLB [mem 0xcbdb6000-0xcfdb6000] (64MB) mapped at [ffff9a62cbdb6000-ffff9a62cfdb5fff]
331[ 1.844687] perf: AMD NB counters detected
332[ 1.844695] perf: AMD L2I counters detected
333[ 1.845075] LVT offset 0 assigned for vector 0x400
334[ 1.845206] perf: AMD IBS detected (0x000000ff)
335[ 1.846668] audit: initializing netlink subsys (disabled)
336[ 1.846739] audit: type=2000 audit(1525789590.716:1): initialized
337[ 1.848989] workingset: timestamp_bits=40 max_order=20 bucket_order=0
338[ 1.849178] zbud: loaded
339[ 1.852516] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
340[ 1.852692] io scheduler noop registered
341[ 1.852695] io scheduler deadline registered
342[ 1.852739] io scheduler cfq registered (default)
343[ 1.855063] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
344[ 1.855069] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
345[ 1.855076] pcie_pme 0000:00:02.2:pcie001: service driver pcie_pme loaded
346[ 1.855155] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
347[ 1.855159] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
348[ 1.855166] pcie_pme 0000:00:02.3:pcie001: service driver pcie_pme loaded
349[ 1.855233] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
350[ 1.855237] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
351[ 1.855244] pcie_pme 0000:00:02.4:pcie001: service driver pcie_pme loaded
352[ 1.855280] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
353[ 1.855298] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
354[ 1.856864] GHES: Failed to enable APEI firmware first mode.
355[ 1.857168] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
356[ 1.878073] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
357[ 1.898937] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
358[ 1.900297] Linux agpgart interface v0.103
359[ 1.901016] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
360[ 1.901018] AMD IOMMUv2 functionality not available on this system
361[ 1.902275] i8042: PNP: No PS/2 controller found. Probing ports directly.
362[ 2.980073] i8042: No controller found
363[ 2.980084] tsc: Refined TSC clocksource calibration: 998.127 MHz
364[ 2.980093] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65b93289, max_idle_ns: 881590487074 ns
365[ 2.980446] mousedev: PS/2 mouse device common for all mice
366[ 2.980552] rtc_cmos 00:01: RTC can wake from S4
367[ 2.980887] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
368[ 2.980928] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
369[ 2.981102] ledtrig-cpu: registered to indicate activity on CPUs
370[ 2.981857] NET: Registered protocol family 10
371[ 2.982781] mip6: Mobile IPv6
372[ 2.982786] NET: Registered protocol family 17
373[ 2.982794] mpls_gso: MPLS GSO support
374[ 2.983683] microcode: CPU0: patch_level=0x07030105
375[ 2.983695] microcode: CPU1: patch_level=0x07030105
376[ 2.983715] microcode: CPU2: patch_level=0x07030105
377[ 2.983767] microcode: CPU3: patch_level=0x07030105
378[ 2.983912] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
379[ 2.984515] registered taskstats version 1
380[ 2.984566] zswap: loaded using pool lzo/zbud
381[ 2.984877] ima: No TPM chip found, activating TPM-bypass!
382[ 2.985717] rtc_cmos 00:01: setting system clock to 2018-05-08 14:26:32 UTC (1525789592)
383[ 2.985900] PM: Hibernation image not present or could not be loaded.
384[ 2.993325] Freeing unused kernel memory: 1396K
385[ 2.993328] Write protecting the kernel read-only data: 12288k
386[ 2.995862] Freeing unused kernel memory: 1980K
387[ 3.010512] Freeing unused kernel memory: 1240K
388[ 3.037919] x86/mm: Checked W+X mappings: passed, no W+X pages found.
389[ 3.091494] random: systemd-udevd: uninitialized urandom read (16 bytes read)
390[ 3.091895] random: systemd-udevd: uninitialized urandom read (16 bytes read)
391[ 3.091938] random: systemd-udevd: uninitialized urandom read (16 bytes read)
392[ 3.096608] random: udevadm: uninitialized urandom read (16 bytes read)
393[ 3.096742] random: udevadm: uninitialized urandom read (16 bytes read)
394[ 3.103171] random: udevadm: uninitialized urandom read (16 bytes read)
395[ 3.103543] random: udevadm: uninitialized urandom read (16 bytes read)
396[ 3.103814] random: udevadm: uninitialized urandom read (16 bytes read)
397[ 3.104086] random: udevadm: uninitialized urandom read (16 bytes read)
398[ 3.104333] random: udevadm: uninitialized urandom read (16 bytes read)
399[ 3.206584] pps_core: LinuxPPS API ver. 1 registered
400[ 3.206616] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
401[ 3.207495] PTP clock support registered
402[ 3.208417] dca service started, version 1.12.1
403[ 3.213727] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
404[ 3.213731] igb: Copyright (c) 2007-2014 Intel Corporation.
405[ 3.222226] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
406[ 3.222233] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
407[ 3.222745] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
408[ 3.228940] SCSI subsystem initialized
409[ 3.228956] ACPI: bus type USB registered
410[ 3.229141] usbcore: registered new interface driver usbfs
411[ 3.229187] usbcore: registered new interface driver hub
412[ 3.229319] usbcore: registered new device driver usb
413[ 3.232530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
414[ 3.233697] ehci-pci: EHCI PCI platform driver
415[ 3.234307] ehci-pci 0000:00:13.0: EHCI Host Controller
416[ 3.234328] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
417[ 3.234375] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
418[ 3.234407] ehci-pci 0000:00:13.0: debug port 2
419[ 3.234572] ehci-pci 0000:00:13.0: irq 18, io mem 0xf7f26000
420[ 3.245621] sdhci: Secure Digital Host Controller Interface driver
421[ 3.245625] sdhci: Copyright(c) Pierre Ossman
422[ 3.245827] libata version 3.00 loaded.
423[ 3.247239] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
424[ 3.247621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
425[ 3.247627] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
426[ 3.247632] usb usb1: Product: EHCI Host Controller
427[ 3.247635] usb usb1: Manufacturer: Linux 4.9.0-4-amd64 ehci_hcd
428[ 3.247639] usb usb1: SerialNumber: 0000:00:13.0
429[ 3.248251] hub 1-0:1.0: USB hub found
430[ 3.248283] hub 1-0:1.0: 2 ports detected
431[ 3.251168] ahci 0000:00:11.0: version 3.0
432[ 3.252325] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
433[ 3.252361] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part ccc
434[ 3.254535] scsi host0: ahci
435[ 3.255382] scsi host1: ahci
436[ 3.255685] ata1: SATA max UDMA/133 abar m1024@0xf7f25000 port 0xf7f25100 irq 31
437[ 3.255693] ata2: SATA max UDMA/133 abar m1024@0xf7f25000 port 0xf7f25180 irq 31
438[ 3.256414] xhci_hcd 0000:00:10.0: xHCI Host Controller
439[ 3.256478] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
440[ 3.256792] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
441[ 3.257679] AVX version of gcm_enc/dec engaged.
442[ 3.257683] AES CTR mode by8 optimization enabled
443[ 3.257716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
444[ 3.257721] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
445[ 3.257725] usb usb2: Product: xHCI Host Controller
446[ 3.257729] usb usb2: Manufacturer: Linux 4.9.0-4-amd64 xhci-hcd
447[ 3.257733] usb usb2: SerialNumber: 0000:00:10.0
448[ 3.258525] hub 2-0:1.0: USB hub found
449[ 3.258567] hub 2-0:1.0: 2 ports detected
450[ 3.259428] xhci_hcd 0000:00:10.0: xHCI Host Controller
451[ 3.259446] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
452[ 3.260127] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
453[ 3.260257] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
454[ 3.260262] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
455[ 3.260266] usb usb3: Product: xHCI Host Controller
456[ 3.260269] usb usb3: Manufacturer: Linux 4.9.0-4-amd64 xhci-hcd
457[ 3.260273] usb usb3: SerialNumber: 0000:00:10.0
458[ 3.261545] hub 3-0:1.0: USB hub found
459[ 3.262042] hub 3-0:1.0: 2 ports detected
460[ 3.262754] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
461[ 3.265311] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
462[ 3.458060] pps pps0: new PPS source ptp0
463[ 3.458086] igb 0000:01:00.0: added PHC on eth0
464[ 3.458102] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
465[ 3.458108] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:3f:9e:58
466[ 3.458113] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
467[ 3.458119] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
468[ 3.570059] ata2: SATA link down (SStatus 0 SControl 300)
469[ 3.575254] usb 1-1: new high-speed USB device number 2 using ehci-pci
470[ 3.694279] pps pps1: new PPS source ptp1
471[ 3.694285] igb 0000:02:00.0: added PHC on eth1
472[ 3.694288] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
473[ 3.694293] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:3f:9e:59
474[ 3.694297] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
475[ 3.694302] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
476[ 3.723593] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
477[ 3.723599] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
478[ 3.724969] hub 1-1:1.0: USB hub found
479[ 3.725069] hub 1-1:1.0: 4 ports detected
480[ 3.731257] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
481[ 3.731611] ata1.00: ATA-10: SATA SSD, S9FM02.8, max UDMA/133
482[ 3.731616] ata1.00: 31277232 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
483[ 3.731897] ata1.00: configured for UDMA/133
484[ 3.732612] scsi 0:0:0:0: Direct-Access ATA SATA SSD 02.8 PQ: 0 ANSI: 5
485[ 3.769332] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
486[ 3.769750] sd 0:0:0:0: [sda] Write Protect is off
487[ 3.769758] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
488[ 3.769914] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
489[ 3.772045] sda: sda1 sda2 < sda5 >
490[ 3.773832] sd 0:0:0:0: [sda] Attached SCSI disk
491[ 3.928247] pps pps2: new PPS source ptp2
492[ 3.928257] igb 0000:03:00.0: added PHC on eth2
493[ 3.928260] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
494[ 3.928266] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:3f:9e:5a
495[ 3.928271] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
496[ 3.928275] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
497[ 3.932242] igb 0000:01:00.0 enp1s0: renamed from eth0
498[ 3.967892] igb 0000:03:00.0 enp3s0: renamed from eth2
499[ 3.999445] clocksource: Switched to clocksource tsc
500[ 4.031966] igb 0000:02:00.0 enp2s0: renamed from eth1
501[ 4.087753] PM: Starting manual resume from disk
502[ 4.087794] PM: Hibernation image partition 8:5 present
503[ 4.087797] PM: Looking for hibernation image.
504[ 4.088027] PM: Image not found (code -22)
505[ 4.088030] PM: Hibernation image not present or could not be loaded.
506[ 4.212954] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
507[ 4.236877] random: fast init done
508[ 4.399975] ip_tables: (C) 2000-2006 Netfilter Core Team
509[ 4.413043] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
510[ 4.413851] systemd[1]: Detected architecture x86-64.
511[ 4.414224] systemd[1]: Set hostname to <debian>.
512[ 4.563482] systemd[1]: Created slice User and Session Slice.
513[ 4.563917] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
514[ 4.564035] systemd[1]: Reached target Remote File Systems.
515[ 4.564207] systemd[1]: Listening on fsck to fsckd communication Socket.
516[ 4.564359] systemd[1]: Listening on Journal Socket.
517[ 4.564590] systemd[1]: Listening on udev Control Socket.
518[ 4.564691] systemd[1]: Listening on Syslog Socket.
519[ 4.594520] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
520[ 4.646165] lp: driver loaded but no devices found
521[ 4.657406] ppdev: user-space parallel port driver
522[ 4.661059] parport0: PC-style at 0x378 [PCSPP,EPP]
523[ 4.661074] parport0: irq 0 detected
524[ 4.760434] lp0: using parport0 (polling).
525[ 4.833006] systemd-journald[203]: Received request to flush runtime journal from PID 1
526[ 4.939599] acpi_cpufreq: overriding BIOS provided _PSD data
527[ 4.956237] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
528[ 4.956250] ACPI: Power Button [PWRB]
529[ 4.956664] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
530[ 4.956669] ACPI: Power Button [PWRF]
531[ 5.008203] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
532[ 5.014930] ccp 0000:00:08.0: 5 command queues available
533[ 5.021143] ccp 0000:00:08.0: enabled
534[ 5.040868] sd 0:0:0:0: Attached scsi generic sg0 type 0
535[ 5.054948] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
536[ 5.055313] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x42
537[ 5.055323] sp5100_tco: I/O address 0x0cd6 already in use
538[ 5.122906] input: PC Speaker as /devices/platform/pcspkr/input/input2
539[ 5.229660] kvm: Nested Virtualization enabled
540[ 5.229690] kvm: Nested Paging enabled
541[ 5.236269] EDAC MC: Ver: 3.0.0
542[ 5.258437] MCE: In-kernel MCE decoding enabled.
543[ 5.260387] EDAC amd64: DRAM ECC enabled.
544[ 5.260402] EDAC amd64: F16h_M30h detected (node 0).
545[ 5.260478] EDAC MC: DCT0 chip selects:
546[ 5.260483] EDAC amd64: MC: 0: 4096MB 1: 0MB
547[ 5.260511] EDAC amd64: MC: 2: 0MB 3: 0MB
548[ 5.260513] EDAC amd64: MC: 4: 0MB 5: 0MB
549[ 5.260516] EDAC amd64: MC: 6: 0MB 7: 0MB
550[ 5.260517] EDAC MC: DCT1 chip selects:
551[ 5.260519] EDAC amd64: MC: 0: 0MB 1: 0MB
552[ 5.260521] EDAC amd64: MC: 2: 0MB 3: 0MB
553[ 5.260523] EDAC amd64: MC: 4: 0MB 5: 0MB
554[ 5.260526] EDAC amd64: MC: 6: 0MB 7: 0MB
555[ 5.260527] EDAC amd64: using x4 syndromes.
556[ 5.260529] EDAC amd64: MCT channel count: 1
557[ 5.261052] EDAC MC0: Giving out device to module amd64_edac controller F16h_M30h: DEV 0000:00:18.2 (INTERRUPT)
558[ 5.263429] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
559[ 5.263432] AMD64 EDAC driver v3.4.0
560[ 5.362900] Adding 4176892k swap on /dev/sda5. Priority:-1 extents:1 across:4176892k SSFS
561[ 5.414500] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
562[ 7.059887] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
563[ 7.060195] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
564[ 72.217428] random: crng init done