Gitiles
Code Review Sign In
review.coreboot.org / board-status / afe434cff40ba399cd60d59fe1f59fefa346a4a9 / . / pcengines / apu2 / 4.6-1904-ga547e40 / 2017-10-26T06_40_33Z / kernel_log.txt
blob: 49d8afce7f1eafa980765f52e2caae84432de3ec [file] [log] [blame]
Michał Żygowskib207fb12017-10-26 11:16:04 +0200[diff] [blame]1[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88012ec00000 s87064 r8192 d31720 u524288
2[ 0.000000] pcpu-alloc: s87064 r8192 d31720 u524288 alloc=1*2097152
3[ 0.000000] pcpu-alloc: [0] 0 1 2 3
4[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029502
5[ 0.000000] Kernel command line: root=LABEL=VOYAGE_FS console=ttyS0,115200n8
6[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
7[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
8[ 0.000000] log_buf_len min size: 16384 bytes
9[ 0.000000] log_buf_len: 32768 bytes
10[ 0.000000] early log buf free: 7920(48%)
11[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
12[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
13[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
14[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
15[ 0.000000] AGP: Checking aperture...
16[ 0.000000] AGP: No AGP bridge found
17[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
18[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
19[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
20[ 0.000000] AGP: This costs you 64MB of RAM
21[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
22[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
23[ 0.000000] Memory: 3964712K/4175180K available (3897K kernel code, 368K rwdata, 1376K rodata, 840K init, 392K bss, 210468K reserved, 0K cma-reserved)
24[ 0.000000] Hierarchical RCU implementation.
25[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
26[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
27[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
28[ 0.000000] NR_IRQS:4352 nr_irqs:1000 16
29[ 0.000000] Console: colour dummy device 80x25
30[ 0.000000] console [ttyS0] enabled
31[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
32[ 0.000000] hpet clockevent registered
33[ 0.000000] tsc: Fast TSC calibration using PIT
34[ 0.000000] tsc: Detected 998.096 MHz processor
35[ 0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.19 BogoMIPS (lpj=998096)
36[ 0.010606] pid_max: default: 32768 minimum: 301
37[ 0.015309] ACPI: Core revision 20150410
38[ 0.038770] ACPI: All ACPI Tables successfully acquired
39[ 0.044242] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
40[ 0.050972] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
41[ 0.059047] CPU: Physical Processor ID: 0
42[ 0.063101] CPU: Processor Core ID: 0
43[ 0.066802] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
44[ 0.072323] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
45[ 0.079415] Freeing SMP alternatives memory: 20K (ffffffff81730000 - ffffffff81735000)
46[ 0.088190] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
47[ 0.205455] smpboot: CPU0: AMD GX-412TC SOC (fam: 16, model: 30, stepping: 01)
48[ 0.212844] Performance Events: AMD PMU driver.
49[ 0.217435] ... version: 0
50[ 0.221500] ... bit width: 48
51[ 0.225606] ... generic registers: 4
52[ 0.229655] ... value mask: 0000ffffffffffff
53[ 0.235006] ... max period: 00007fffffffffff
54[ 0.240322] ... fixed-purpose events: 0
55[ 0.244354] ... event mask: 000000000000000f
56[ 0.250852] x86: Booting SMP configuration:
57[ 0.255069] .... node #0, CPUs: #1 #2 #3
58[ 0.300447] x86: Booted up 1 node, 4 CPUs
59[ 0.304682] smpboot: Total of 4 processors activated (7984.76 BogoMIPS)
60[ 0.313183] devtmpfs: initialized
61[ 0.317704] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
62[ 0.328229] NET: Registered protocol family 16
63[ 0.338458] cpuidle: using governor ladder
64[ 0.350487] cpuidle: using governor menu
65[ 0.354615] ACPI: bus type PCI registered
66[ 0.358660] PCI: Using configuration type 1 for base access
67[ 0.364270] PCI: Using configuration type 1 for extended access
68[ 0.377306] ACPI: Added _OSI(Module Device)
69[ 0.381513] ACPI: Added _OSI(Processor Device)
70[ 0.385977] ACPI: Added _OSI(3.0 _SCP Extensions)
71[ 0.390694] ACPI: Added _OSI(Processor Aggregator Device)
72[ 0.401887] ACPI: Executed 2 blocks of module-level executable AML code
73[ 0.422296] ACPI: Interpreter enabled
74[ 0.426064] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
75[ 0.435376] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580)
76[ 0.444770] ACPI: (supports S0 S1 S4 S5)
77[ 0.448731] ACPI: Using IOAPIC for interrupt routing
78[ 0.453761] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
79[ 0.474737] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
80[ 0.480944] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
81[ 0.488126] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
82[ 0.498187] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
83[ 0.509349] PCI host bridge to bus 0000:00
84[ 0.513466] pci_bus 0000:00: root bus resource [bus 00-ff]
85[ 0.518965] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
86[ 0.525777] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
87[ 0.532595] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
88[ 0.539508] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
89[ 0.546386] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
90[ 0.553349] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
91[ 0.553763] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
92[ 0.554143] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
93[ 0.554373] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
94[ 0.554494] pci 0000:00:02.2: System wakeup disabled by ACPI
95[ 0.560421] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
96[ 0.560530] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
97[ 0.560640] pci 0000:00:02.3: System wakeup disabled by ACPI
98[ 0.566551] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
99[ 0.566717] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
100[ 0.566831] pci 0000:00:02.4: System wakeup disabled by ACPI
101[ 0.572724] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
102[ 0.572753] pci 0000:00:08.0: reg 0x10: [mem 0xf7f00000-0xf7f1ffff 64bit pref]
103[ 0.572767] pci 0000:00:08.0: reg 0x18: [mem 0xf7d00000-0xf7dfffff]
104[ 0.572782] pci 0000:00:08.0: reg 0x1c: [mem 0xf7f24000-0xf7f24fff]
105[ 0.572796] pci 0000:00:08.0: reg 0x20: [mem 0xf7e00000-0xf7efffff]
106[ 0.572810] pci 0000:00:08.0: reg 0x24: [mem 0xf7f20000-0xf7f21fff]
107[ 0.573129] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
108[ 0.573210] pci 0000:00:10.0: reg 0x10: [mem 0xf7f22000-0xf7f23fff 64bit]
109[ 0.573384] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
110[ 0.573520] pci 0000:00:10.0: System wakeup disabled by ACPI
111[ 0.579374] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
112[ 0.579412] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
113[ 0.579428] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
114[ 0.579445] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
115[ 0.579461] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
116[ 0.579477] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
117[ 0.579524] pci 0000:00:11.0: reg 0x24: [mem 0xf7f25000-0xf7f253ff]
118[ 0.579593] pci 0000:00:11.0: set SATA to AHCI mode
119[ 0.584552] pci 0000:00:11.0: PME# supported from D3hot
120[ 0.584791] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
121[ 0.584819] pci 0000:00:13.0: reg 0x10: [mem 0xf7f26000-0xf7f260ff]
122[ 0.584955] pci 0000:00:13.0: supports D1 D2
123[ 0.584978] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
124[ 0.585131] pci 0000:00:13.0: System wakeup disabled by ACPI
125[ 0.591027] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
126[ 0.591447] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
127[ 0.591932] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
128[ 0.591962] pci 0000:00:14.7: reg 0x10: [mem 0xf7f27000-0xf7f270ff 64bit]
129[ 0.592359] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
130[ 0.592751] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
131[ 0.593095] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
132[ 0.593421] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
133[ 0.593772] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
134[ 0.594024] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
135[ 0.594608] pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
136[ 0.594676] pci 0000:01:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff]
137[ 0.594768] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f]
138[ 0.594791] pci 0000:01:00.0: reg 0x1c: [mem 0xf7a20000-0xf7a23fff]
139[ 0.595038] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
140[ 0.595252] pci 0000:00:02.2: PCI bridge to [bus 01]
141[ 0.600235] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
142[ 0.600276] pci 0000:00:02.2: bridge window [mem 0xf7a00000-0xf7afffff]
143[ 0.600466] pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
144[ 0.600502] pci 0000:02:00.0: reg 0x10: [mem 0xf7b00000-0xf7b1ffff]
145[ 0.600567] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f]
146[ 0.600590] pci 0000:02:00.0: reg 0x1c: [mem 0xf7b20000-0xf7b23fff]
147[ 0.600774] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
148[ 0.600955] pci 0000:00:02.3: PCI bridge to [bus 02]
149[ 0.605989] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
150[ 0.605999] pci 0000:00:02.3: bridge window [mem 0xf7b00000-0xf7bfffff]
151[ 0.606240] pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
152[ 0.606303] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
153[ 0.606341] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
154[ 0.606398] pci 0000:03:00.0: reg 0x1c: [mem 0xf7c20000-0xf7c23fff]
155[ 0.606612] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
156[ 0.606851] pci 0000:00:02.4: PCI bridge to [bus 03]
157[ 0.611862] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
158[ 0.611888] pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
159[ 0.611991] pci_bus 0000:00: on NUMA node 0
160[ 0.612928] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
161[ 0.620084] ACPI: PCI Interrupt Link [INTB] (IRQs *3 4 5 7 10 11 12 15)
162[ 0.627211] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
163[ 0.634326] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
164[ 0.641479] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
165[ 0.648584] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
166[ 0.654280] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
167[ 0.661700] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
168[ 0.669365] ACPI: Enabled 4 GPEs in block 00 to 1F
169[ 0.674725] vgaarb: loaded
170[ 0.677857] SCSI subsystem initialized
171[ 0.682044] PCI: Using ACPI for IRQ routing
172[ 0.686260] PCI: pci_cache_line_size set to 64 bytes
173[ 0.686412] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
174[ 0.686420] e820: reserve RAM buffer [mem 0xcfdb5000-0xcfffffff]
175[ 0.686425] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
176[ 0.687391] Switched to clocksource hpet
177[ 0.691889] pnp: PnP ACPI init
178[ 0.695600] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
179[ 0.702251] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
180[ 0.702406] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
181[ 0.702826] pnp: PnP ACPI: found 2 devices
182[ 0.722757] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
183[ 0.731654] pci 0000:00:02.2: PCI bridge to [bus 01]
184[ 0.736686] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
185[ 0.742826] pci 0000:00:02.2: bridge window [mem 0xf7a00000-0xf7afffff]
186[ 0.749679] pci 0000:00:02.3: PCI bridge to [bus 02]
187[ 0.754659] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
188[ 0.760778] pci 0000:00:02.3: bridge window [mem 0xf7b00000-0xf7bfffff]
189[ 0.767590] pci 0000:00:02.4: PCI bridge to [bus 03]
190[ 0.772577] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
191[ 0.778687] pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
192[ 0.785497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
193[ 0.785505] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
194[ 0.785513] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
195[ 0.785520] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
196[ 0.785527] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
197[ 0.785534] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
198[ 0.785541] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
199[ 0.785579] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
200[ 0.785585] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
201[ 0.785593] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
202[ 0.785599] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
203[ 0.785762] NET: Registered protocol family 2
204[ 0.790957] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
205[ 0.798486] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
206[ 0.805480] TCP: Hash tables configured (established 32768 bind 32768)
207[ 0.812137] UDP hash table entries: 2048 (order: 4, 65536 bytes)
208[ 0.818192] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
209[ 0.824911] NET: Registered protocol family 1
210[ 0.829778] RPC: Registered named UNIX socket transport module.
211[ 0.835722] RPC: Registered udp transport module.
212[ 0.840481] RPC: Registered tcp transport module.
213[ 0.845203] RPC: Registered tcp NFSv4.1 backchannel transport module.
214[ 0.860676] PCI: CLS 64 bytes, default 64
215[ 0.860924] Trying to unpack rootfs image as initramfs...
216[ 4.130328] Freeing initrd memory: 4840K (ffff880037b36000 - ffff880037ff0000)
217[ 4.137630] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
218[ 4.144114] software IO TLB [mem 0xcbdb5000-0xcfdb5000] (64MB) mapped at [ffff8800cbdb5000-ffff8800cfdb4fff]
219[ 4.154192] perf: AMD NB counters detected
220[ 4.158312] perf: AMD L2I counters detected
221[ 4.162925] microcode: CPU0: patch_level=0x07030105
222[ 4.167866] microcode: CPU1: patch_level=0x07030105
223[ 4.172797] microcode: CPU2: patch_level=0x07030105
224[ 4.177702] microcode: CPU3: patch_level=0x07030105
225[ 4.182814] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
226[ 4.191666] LVT offset 0 assigned for vector 0x400
227[ 4.196563] perf: AMD IBS detected (0x000000ff)
228[ 4.204067] futex hash table entries: 1024 (order: 4, 65536 bytes)
229[ 4.212998] NFS: Registering the id_resolver key type
230[ 4.218163] Key type id_resolver registered
231[ 4.222477] Key type id_legacy registered
232[ 4.227927] bounce: pool size: 64 pages
233[ 4.231862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
234[ 4.239334] io scheduler noop registered
235[ 4.243286] io scheduler deadline registered
236[ 4.247663] io scheduler cfq registered (default)
237[ 4.254529] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
238[ 4.262932] ACPI: Power Button [PWRB]
239[ 4.266835] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
240[ 4.274282] ACPI: Power Button [PWRF]
241[ 4.278221] ACPI: acpi_idle registered with cpuidle
242[ 4.351644] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
243[ 4.379163] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
244[ 4.408119] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
245[ 4.416969] Linux agpgart interface v0.103
246[ 4.431027] brd: module loaded
247[ 4.434365] i8042: PNP: No PS/2 controller found. Probing ports directly.
248[ 5.156752] tsc: Refined TSC clocksource calibration: 998.127 MHz
249[ 5.162870] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65b93289, max_idle_ns: 881590487074 ns
250[ 5.528538] i8042: No controller found
251[ 5.532574] mousedev: PS/2 mouse device common for all mice
252[ 5.538552] rtc_cmos 00:01: RTC can wake from S4
253[ 5.543505] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
254[ 5.549667] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
255[ 5.556895] Loading driver leds-apu (v0.1).
256[ 5.561107] ledtrig-cpu: registered to indicate activity on CPUs
257[ 5.567224] hidraw: raw HID events driver (C) Jiri Kosina
258[ 5.572990] NET: Registered protocol family 17
259[ 5.577559] Key type dns_resolver registered
260[ 5.583664] rtc_cmos 00:01: setting system clock to 2017-10-26 09:14:02 UTC (1509009242)
261[ 5.593481] Freeing unused kernel memory: 840K (ffffffff8165e000 - ffffffff81730000)
262[ 5.601668] Write protecting the kernel read-only data: 6144k
263[ 5.608410] Freeing unused kernel memory: 188K (ffff8800013d1000 - ffff880001400000)
264[ 5.617486] Freeing unused kernel memory: 672K (ffff880001558000 - ffff880001600000)
265[ 5.660519] systemd-udevd[1029]: starting version 215
266[ 5.667345] random: systemd-udevd urandom read with 7 bits of entropy available
267[ 5.736867] pps_core: LinuxPPS API ver. 1 registered
268[ 5.742226] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
269[ 5.744792] ACPI: bus type USB registered
270[ 5.744927] usbcore: registered new interface driver usbfs
271[ 5.744999] usbcore: registered new interface driver hub
272[ 5.745142] usbcore: registered new device driver usb
273[ 5.746194] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
274[ 5.746877] ehci-pci: EHCI PCI platform driver
275[ 5.747524] ehci-pci 0000:00:13.0: EHCI Host Controller
276[ 5.747543] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
277[ 5.747560] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
278[ 5.747577] ehci-pci 0000:00:13.0: debug port 2
279[ 5.747653] ehci-pci 0000:00:13.0: irq 18, io mem 0xf7f26000
280[ 5.748434] sdhci: Secure Digital Host Controller Interface driver
281[ 5.748435] sdhci: Copyright(c) Pierre Ossman
282[ 5.749855] libata version 3.00 loaded.
283[ 5.753519] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
284[ 5.753789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
285[ 5.753794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
286[ 5.753799] usb usb1: Product: EHCI Host Controller
287[ 5.753832] usb usb1: Manufacturer: Linux 4.1.6-voyage ehci_hcd
288[ 5.753836] usb usb1: SerialNumber: 0000:00:13.0
289[ 5.754835] hub 1-0:1.0: USB hub found
290[ 5.754871] hub 1-0:1.0: 2 ports detected
291[ 5.755903] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
292[ 5.756536] sdhci-pci 0000:00:14.7: No vmmc regulator found
293[ 5.756539] sdhci-pci 0000:00:14.7: No vqmmc regulator found
294[ 5.758811] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
295[ 5.759387] xhci_hcd 0000:00:10.0: xHCI Host Controller
296[ 5.759409] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
297[ 5.759733] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
298[ 5.760738] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
299[ 5.760744] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
300[ 5.760749] usb usb2: Product: xHCI Host Controller
301[ 5.760753] usb usb2: Manufacturer: Linux 4.1.6-voyage xhci-hcd
302[ 5.760757] usb usb2: SerialNumber: 0000:00:10.0
303[ 5.761709] hub 2-0:1.0: USB hub found
304[ 5.762904] hub 2-0:1.0: 2 ports detected
305[ 5.763490] xhci_hcd 0000:00:10.0: xHCI Host Controller
306[ 5.763518] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
307[ 5.763659] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
308[ 5.763784] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
309[ 5.763789] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
310[ 5.763794] usb usb3: Product: xHCI Host Controller
311[ 5.763797] usb usb3: Manufacturer: Linux 4.1.6-voyage xhci-hcd
312[ 5.763801] usb usb3: SerialNumber: 0000:00:10.0
313[ 5.764571] hub 3-0:1.0: USB hub found
314[ 5.764602] hub 3-0:1.0: 2 ports detected
315[ 5.765272] ahci 0000:00:11.0: version 3.0
316[ 5.765878] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
317[ 5.765888] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part ccc
318[ 5.767120] scsi host0: ahci
319[ 5.767602] scsi host1: ahci
320[ 5.767935] ata1: SATA max UDMA/133 abar m1024@0xf7f25000 port 0xf7f25100 irq 32
321[ 5.767940] ata2: SATA max UDMA/133 abar m1024@0xf7f25000 port 0xf7f25180 irq 32
322[ 6.057921] usb 1-1: new high-speed USB device number 2 using ehci-pci
323[ 6.064857] usb 2-2: new high-speed USB device number 2 using xhci_hcd
324[ 6.072849] ata2: SATA link down (SStatus 0 SControl 300)
325[ 6.075865] ata1: SATA link down (SStatus 0 SControl 300)
326[ 6.091562] PTP clock support registered
327[ 6.098387] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
328[ 6.105747] igb: Copyright (c) 2007-2014 Intel Corporation.
329[ 6.145099] pps pps0: new PPS source ptp0
330[ 6.149319] igb 0000:01:00.0: added PHC on eth0
331[ 6.154081] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
332[ 6.161268] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:41:20
333[ 6.168629] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
334[ 6.174123] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
335[ 6.182259] Switched to clocksource tsc
336[ 6.183195] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
337[ 6.183201] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
338[ 6.184672] hub 1-1:1.0: USB hub found
339[ 6.184838] hub 1-1:1.0: 4 ports detected
340[ 6.214475] pps pps1: new PPS source ptp1
341[ 6.218664] igb 0000:02:00.0: added PHC on eth1
342[ 6.223423] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
343[ 6.230575] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:41:21
344[ 6.237997] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
345[ 6.243416] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
346[ 6.268497] usb 2-2: New USB device found, idVendor=0951, idProduct=1665
347[ 6.275511] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
348[ 6.283084] usb 2-2: Product: DataTraveler 2.0
349[ 6.285937] pps pps2: new PPS source ptp2
350[ 6.285943] igb 0000:03:00.0: added PHC on eth2
351[ 6.285947] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
352[ 6.285952] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:41:22
353[ 6.285957] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
354[ 6.285962] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
355[ 6.326687] usb 2-2: Manufacturer: Kingston
356[ 6.332467] usb 2-2: SerialNumber: 60A44C3FB294BE115968000E
357[ 6.345899] usb-storage 2-2:1.0: USB Mass Storage device detected
358[ 6.353345] scsi host2: usb-storage 2-2:1.0
359[ 6.359121] usbcore: registered new interface driver usb-storage
360[ 7.363763] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
361[ 7.374920] sd 2:0:0:0: Attached scsi generic sg0 type 0
362[ 8.085786] sd 2:0:0:0: [sda] 30514176 512-byte logical blocks: (15.6 GB/14.5 GiB)
363[ 8.094068] sd 2:0:0:0: [sda] Write Protect is off
364[ 8.099054] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
365[ 8.099402] sd 2:0:0:0: [sda] No Caching mode page found
366[ 8.105027] sd 2:0:0:0: [sda] Assuming drive cache: write through
367[ 8.115839] sda: sda1
368[ 8.120062] sd 2:0:0:0: [sda] Attached SCSI removable disk
369[ 13.768700] random: nonblocking pool is initialized
370[ 14.487817] systemd-udevd[1262]: starting version 215
371[ 14.687993] acpi-cpufreq: overriding BIOS provided _PSD data
372[ 14.766816] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
373[ 14.776135] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
374[ 14.803451] input: PC Speaker as /devices/platform/pcspkr/input/input2
375[ 15.446215] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
376[ 16.046408] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
377[ 17.696878] NET: Registered protocol family 10
378[ 17.857678] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
379[ 18.115467] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
380[ 18.636267] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
381[ 19.444875] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
382[ 19.455310] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
383[ 30.081465] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended