Michał Żygowski | 96d8f8c | 2018-05-10 12:20:42 +0200 | [diff] [blame] | 1 | [ 0.000000] Console: colour dummy device 80x25 |
| 2 | [ 0.000000] console [ttyS0] enabled |
| 3 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 4 | [ 0.000000] tsc: Detected 498.039 MHz processor |
| 5 | [ 0.003008] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.07 BogoMIPS (lpj=498039) |
| 6 | [ 0.005013] pid_max: default: 32768 minimum: 301 |
| 7 | [ 0.007196] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| 8 | [ 0.008018] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| 9 | [ 0.010874] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 |
| 10 | [ 0.010874] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 |
| 11 | [ 0.010874] tlb_flushall_shift: -1 |
| 12 | [ 0.019958] Freeing SMP alternatives memory: 20K (c1493000 - c1498000) |
| 13 | [ 0.020245] smpboot: weird, boot CPU (#0) not listed by the BIOS |
| 14 | [ 0.021013] smpboot: SMP motherboard not detected |
| 15 | [ 0.022012] smpboot: Local APIC not detected. Using dummy APIC emulation. |
| 16 | [ 0.023010] smpboot: SMP disabled |
| 17 | [ 0.024033] Performance Events: no PMU driver, software events only. |
| 18 | [ 0.027170] x86: Booted up 1 node, 1 CPUs |
| 19 | [ 0.028014] smpboot: Total of 1 processors activated (996.07 BogoMIPS) |
| 20 | [ 0.030534] devtmpfs: initialized |
| 21 | [ 0.033981] NET: Registered protocol family 16 |
| 22 | [ 0.036866] cpuidle: using governor ladder |
| 23 | [ 0.038111] cpuidle: using governor menu |
| 24 | [ 0.040455] PCI: PCI BIOS revision 2.10 entry at 0xfd173, last bus=0 |
| 25 | [ 0.041011] PCI: Using configuration type 1 for base access |
| 26 | [ 0.064550] bio: create slab <bio-0> at 0 |
| 27 | [ 0.066480] ACPI: Interpreter disabled. |
| 28 | [ 0.068075] vgaarb: loaded |
| 29 | [ 0.070722] SCSI subsystem initialized |
| 30 | [ 0.072656] PCI: Probing PCI hardware |
| 31 | [ 0.073049] PCI: root bus 00: using default resources |
| 32 | [ 0.073063] PCI: Probing PCI hardware (bus 00) |
| 33 | [ 0.073361] PCI host bridge to bus 0000:00 |
| 34 | [ 0.074054] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] |
| 35 | [ 0.075024] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] |
| 36 | [ 0.077070] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] |
| 37 | [ 0.078222] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000 |
| 38 | [ 0.078364] pci 0000:00:01.0: reg 0x10: [io 0xac1c-0xac1f] |
| 39 | [ 0.079569] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000 |
| 40 | [ 0.079848] pci 0000:00:01.1: reg 0x10: [mem 0xfd000000-0xfdffffff] |
| 41 | [ 0.080094] pci 0000:00:01.1: reg 0x14: [mem 0xfe000000-0xfe003fff] |
| 42 | [ 0.080291] pci 0000:00:01.1: reg 0x18: [mem 0xfe004000-0xfe007fff] |
| 43 | [ 0.080488] pci 0000:00:01.1: reg 0x1c: [mem 0xfe008000-0xfe00bfff] |
| 44 | [ 0.080685] pci 0000:00:01.1: reg 0x20: [mem 0xfe00c000-0xfe00ffff] |
| 45 | [ 0.081489] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=mem,locks=none |
| 46 | [ 0.082323] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000 |
| 47 | [ 0.082569] pci 0000:00:01.2: reg 0x10: [mem 0xfe010000-0xfe013fff] |
| 48 | [ 0.084544] pci 0000:00:0d.0: [1106:3053] type 00 class 0x020000 |
| 49 | [ 0.084589] pci 0000:00:0d.0: reg 0x10: [io 0x1000-0x10ff] |
| 50 | [ 0.084621] pci 0000:00:0d.0: reg 0x14: [mem 0xfe019000-0xfe0190ff] |
| 51 | [ 0.084723] pci 0000:00:0d.0: supports D1 D2 |
| 52 | [ 0.084744] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold |
| 53 | [ 0.085344] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100 |
| 54 | [ 0.085662] pci 0000:00:0f.0: reg 0x10: [io 0x1cb0-0x1cb7] |
| 55 | [ 0.085926] pci 0000:00:0f.0: reg 0x14: [io 0x1400-0x14ff] |
| 56 | [ 0.086195] pci 0000:00:0f.0: reg 0x18: [io 0x1c00-0x1c3f] |
| 57 | [ 0.086461] pci 0000:00:0f.0: reg 0x1c: [io 0x1c80-0x1c9f] |
| 58 | [ 0.086731] pci 0000:00:0f.0: reg 0x20: [io 0x1800-0x187f] |
| 59 | [ 0.087073] pci 0000:00:0f.0: reg 0x24: [io 0x1c40-0x1c7f] |
| 60 | [ 0.088044] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180 |
| 61 | [ 0.088950] pci 0000:00:0f.2: reg 0x20: [io 0x1ca0-0x1caf] |
| 62 | [ 0.089992] pci 0000:00:0f.3: [1022:2093] type 00 class 0x040100 |
| 63 | [ 0.090278] pci 0000:00:0f.3: reg 0x10: [io 0x1880-0x18ff] |
| 64 | [ 0.091966] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310 |
| 65 | [ 0.092369] pci 0000:00:0f.4: reg 0x10: [mem 0xfe016000-0xfe016fff] |
| 66 | [ 0.093881] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold |
| 67 | [ 0.094697] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320 |
| 68 | [ 0.095073] pci 0000:00:0f.5: reg 0x10: [mem 0xfe017000-0xfe017fff] |
| 69 | [ 0.096591] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold |
| 70 | [ 0.097267] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 |
| 71 | [ 0.097847] PCI: pci_cache_line_size set to 32 bytes |
| 72 | [ 0.098284] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 73 | [ 0.098302] e820: reserve RAM buffer [mem 0x0f7b3000-0x0fffffff] |
| 74 | [ 0.099798] Switched to clocksource pit |
| 75 | [ 0.100498] pnp: PnP ACPI: disabled |
| 76 | [ 0.125568] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] |
| 77 | [ 0.125596] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] |
| 78 | [ 0.125744] NET: Registered protocol family 2 |
| 79 | [ 0.128183] TCP established hash table entries: 2048 (order: 1, 8192 bytes) |
| 80 | [ 0.129336] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) |
| 81 | [ 0.130897] TCP: Hash tables configured (established 2048 bind 2048) |
| 82 | [ 0.131458] TCP: reno registered |
| 83 | [ 0.132752] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| 84 | [ 0.133657] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| 85 | [ 0.135317] NET: Registered protocol family 1 |
| 86 | [ 0.137065] RPC: Registered named UNIX socket transport module. |
| 87 | [ 0.138039] RPC: Registered udp transport module. |
| 88 | [ 0.138790] RPC: Registered tcp transport module. |
| 89 | [ 0.139541] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 90 | [ 0.141125] pci 0000:00:01.1: Boot video device |
| 91 | [ 0.141922] PCI: CLS 64 bytes, default 32 |
| 92 | [ 0.142191] Trying to unpack rootfs image as initramfs... |
| 93 | [ 1.372658] Freeing initrd memory: 6352K (cf16f000 - cf7a3000) |
| 94 | [ 1.373965] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| 95 | [ 1.374980] microcode: AMD CPU family 0x5 not supported |
| 96 | [ 1.393559] futex hash table entries: 256 (order: 2, 16384 bytes) |
| 97 | [ 1.397083] NFS: Registering the id_resolver key type |
| 98 | [ 1.398247] Key type id_resolver registered |
| 99 | [ 1.399500] Key type id_legacy registered |
| 100 | [ 1.400638] msgmni has been set to 480 |
| 101 | [ 1.402746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 102 | [ 1.403206] io scheduler noop registered |
| 103 | [ 1.404178] io scheduler deadline registered |
| 104 | [ 1.405526] io scheduler cfq registered (default) |
| 105 | [ 1.556692] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 106 | [ 1.559349] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 107 | [ 1.561368] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| 108 | [ 1.564301] Linux agpgart interface v0.103 |
| 109 | [ 1.582498] brd: module loaded |
| 110 | [ 1.583849] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285) |
| 111 | [ 1.586827] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285) |
| 112 | [ 1.589789] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285) |
| 113 | [ 1.592737] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285) |
| 114 | [ 1.595690] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285) |
| 115 | [ 1.599700] cs5535-mfd 0000:00:0f.0: 5 devices registered. |
| 116 | [ 1.601657] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| 117 | [ 1.605324] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 118 | [ 1.606387] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 119 | [ 1.609104] mousedev: PS/2 mouse device common for all mice |
| 120 | [ 1.611743] Loading driver leds-apu (v0.1). |
| 121 | [ 1.613082] ledtrig-cpu: registered to indicate activity on CPUs |
| 122 | [ 1.614530] hidraw: raw HID events driver (C) Jiri Kosina |
| 123 | [ 1.616589] TCP: cubic registered |
| 124 | [ 1.618027] NET: Registered protocol family 17 |
| 125 | [ 1.619720] Key type dns_resolver registered |
| 126 | [ 1.620141] Using IPI No-Shortcut mode |
| 127 | [ 1.624085] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) |
| 128 | [ 1.626269] spurious 8259A interrupt: IRQ7. |
| 129 | [ 1.626799] Freeing unused kernel memory: 384K (c1433000 - c1493000) |
| 130 | [ 1.627927] Write protecting the kernel text: 3068k |
| 131 | [ 1.628958] Write protecting the kernel read-only data: 1012k |
| 132 | [ 1.708717] udevd[902]: starting version 175 |
| 133 | [ 1.984070] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker |
| 134 | [ 2.024277] libata version 3.00 loaded. |
| 135 | [ 2.036778] via-rhine 0000:00:0d.0 eth0: VIA Rhine III (Management Adapter) at 0xfe019000, 00:0d:b9:0f:41:14, IRQ 10 |
| 136 | [ 2.038620] via-rhine 0000:00:0d.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 4de1 |
| 137 | [ 2.061695] pata_amd 0000:00:0f.2: version 0.4.1 |
| 138 | [ 2.080862] scsi0 : pata_amd |
| 139 | [ 2.093577] scsi1 : pata_amd |
| 140 | [ 2.095277] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1ca0 irq 14 |
| 141 | [ 2.096281] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1ca8 irq 15 |
| 142 | [ 2.105819] usbcore: registered new interface driver usbfs |
| 143 | [ 2.112526] usbcore: registered new interface driver hub |
| 144 | [ 2.123144] usbcore: registered new device driver usb |
| 145 | [ 2.146829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 146 | [ 2.156414] ehci-pci: EHCI PCI platform driver |
| 147 | [ 2.188062] ehci-pci 0000:00:0f.5: EHCI Host Controller |
| 148 | [ 2.214582] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1 |
| 149 | [ 2.215456] ehci-pci 0000:00:0f.5: cache line size of 64 is not supported |
| 150 | [ 2.215506] ehci-pci 0000:00:0f.5: irq 9, io mem 0xfe017000 |
| 151 | [ 2.252384] ata1.00: CFA: CF 2GB, 20110221, max UDMA/66 |
| 152 | [ 2.253766] ata1.00: 3931200 sectors, multi 0: LBA |
| 153 | [ 2.255334] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00 |
| 154 | [ 2.261297] ata1.00: configured for UDMA/66 |
| 155 | [ 2.263226] scsi 0:0:0:0: Direct-Access ATA CF 2GB 2011 PQ: 0 ANSI: 5 |
| 156 | [ 2.265505] sd 0:0:0:0: [sda] 3931200 512-byte logical blocks: (2.01 GB/1.87 GiB) |
| 157 | [ 2.266415] sd 0:0:0:0: [sda] Write Protect is off |
| 158 | [ 2.267405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 159 | [ 2.268477] ata2: port disabled--ignoring |
| 160 | [ 2.268689] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA |
| 161 | [ 2.280604] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 162 | [ 2.281610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 163 | [ 2.283000] usb usb1: Product: EHCI Host Controller |
| 164 | [ 2.284060] usb usb1: Manufacturer: Linux 3.14.12-voyage ehci_hcd |
| 165 | [ 2.285330] usb usb1: SerialNumber: 0000:00:0f.5 |
| 166 | [ 2.302193] sda: sda1 |
| 167 | [ 2.320217] hub 1-0:1.0: USB hub found |
| 168 | [ 2.327445] hub 1-0:1.0: 4 ports detected |
| 169 | [ 2.341065] sd 0:0:0:0: [sda] Attached SCSI disk |
| 170 | [ 2.375042] Switched to clocksource tsc |
| 171 | [ 3.152163] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 172 | [ 3.397030] random: nonblocking pool is initialized |
| 173 | [ 4.648137] udevd[1135]: starting version 175 |
| 174 | [ 5.024925] lxfb 0000:00:01.1: 8192 KB of video memory at 0xfd000000 |
| 175 | [ 5.051371] AMD Geode RNG detected |
| 176 | [ 5.059466] cs5535-gpio cs5535-gpio: reserved resource region [io 0x1400-0x14ff] |
| 177 | [ 5.072803] fbcon: Geode LX (fb0) is primary device |
| 178 | [ 5.074033] Console: switching to colour frame buffer device 80x30 |
| 179 | [ 5.095773] fb0: Geode LX frame buffer device |
| 180 | [ 5.134733] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x1c00-0x1c3f] |
| 181 | [ 5.142543] cs5535-mfgpt cs5535-mfgpt: 2 MFGPT timers available |
| 182 | [ 5.181288] geode-aes: GEODE AES engine enabled. |
| 183 | [ 5.275998] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 184 | [ 5.308625] ohci-pci: OHCI PCI platform driver |
| 185 | [ 5.326114] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| 186 | [ 5.335646] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered |
| 187 | [ 5.376149] ohci-pci 0000:00:0f.4: OHCI PCI host controller |
| 188 | [ 5.381903] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2 |
| 189 | [ 5.432392] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| 190 | [ 5.468520] Clocksource tsc unstable (delta = 79001358 ns) |
| 191 | [ 5.485787] Switched to clocksource pit |
| 192 | [ 5.502636] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram |
| 193 | [ 5.525757] ohci-pci 0000:00:0f.4: irq 9, io mem 0xfe016000 |
| 194 | [ 5.864685] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| 195 | [ 5.865626] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 196 | [ 5.866944] usb usb2: Product: OHCI PCI host controller |
| 197 | [ 5.868256] usb usb2: Manufacturer: Linux 3.14.12-voyage ohci_hcd |
| 198 | [ 5.868456] usb usb2: SerialNumber: 0000:00:0f.4 |
| 199 | [ 5.878025] hub 2-0:1.0: USB hub found |
| 200 | [ 5.890785] hub 2-0:1.0: 4 ports detected |
| 201 | [ 7.759349] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended |
| 202 | [ 8.104719] cs5535-mfgpt cs5535-mfgpt: registered timer 0 |
| 203 | [ 12.548773] NET: Registered protocol family 10 |
| 204 | [ 16.340173] Switched to clocksource tsc |
| 205 | [ 16.344829] ttyS0: 1 input overrun(s) |