Gitiles
Code Review Sign In
review.coreboot.org / board-status / ae74d499a16318c5c427cd4abcb9533b703e2eaf / . / asus / kfsn4-dre_k8 / 4.3-408-g2a08137 / 2016-03-08T22_58_01Z / kernel_log.txt
blob: a26e10ae5f61fd354af613b6a2183f8ab6cb3531 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standff0d89b2016-03-08 23:32:01 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9efff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9f000-0x00000000bfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 03/08/2016
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
27[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
28[ 0.000000] 2 base 00F8000000 mask FFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000140000000 aka 5120M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9f max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f07b0-0x000f07bf] mapped at [ffff8800000f07b0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
40[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
41[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
42[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
43[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
44[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
45[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
46[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
48[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
50[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9efff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
54[ 0.000000] [mem 0xbfe00000-0xbff9efff] page 4k
55[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
56[ 0.000000] ACPI: Early table checksum verification disabled
57[ 0.000000] ACPI: RSDP 0x00000000000F0950 000024 (v02 CORE )
58[ 0.000000] ACPI: XSDT 0x00000000BFFB80E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
59[ 0.000000] ACPI: FACP 0x00000000BFFBA8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: DSDT 0x00000000BFFB8280 002648 (v02 ASUS COREBOOT 00000001 INTL 20150619)
61[ 0.000000] ACPI: FACS 0x00000000BFFB8240 000040
62[ 0.000000] ACPI: SSDT 0x00000000BFFBA9D0 0006BD (v02 CORE COREBOOT 0000002A CORE 0000002A)
63[ 0.000000] ACPI: TCPA 0x00000000BFFBB090 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: APIC 0x00000000BFFBB0D0 00008E (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: SRAT 0x00000000BFFBB160 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: SLIT 0x00000000BFFBB250 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: HPET 0x00000000BFFBB280 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SRAT 0x00000000BFFBB2C0 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: SLIT 0x00000000BFFBB3B0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: Local APIC address 0xfee00000
71[ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
72[ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
73[ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1
74[ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1
75[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
76[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
77[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
78[ 0.000000] NUMA: Initialized distance table, cnt=2
79[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
80[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
81[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
82[ 0.000000] NODE_DATA [mem 0x13fff7000-0x13fffbfff]
83[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
84[ 0.000000] Zone ranges:
85[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
86[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
87[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
88[ 0.000000] Movable zone start for each node
89[ 0.000000] Early memory node ranges
90[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
91[ 0.000000] node 0: [mem 0x00100000-0xbff9efff]
92[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
93[ 0.000000] On node 0 totalpages: 1048381
94[ 0.000000] DMA zone: 56 pages used for memmap
95[ 0.000000] DMA zone: 21 pages reserved
96[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
97[ 0.000000] DMA32 zone: 10695 pages used for memmap
98[ 0.000000] DMA32 zone: 782239 pages, LIFO batch:31
99[ 0.000000] Normal zone: 3584 pages used for memmap
100[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
101[ 0.000000] Detected use of extended apic ids on hypertransport bus
102[ 0.000000] Detected use of extended apic ids on hypertransport bus
103[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
104[ 0.000000] ACPI: Local APIC address 0xfee00000
105[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
106[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
107[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
108[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
109[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
110[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
111[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
112[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
113[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
114[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
115[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
116[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
117[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
118[ 0.000000] ACPI: IRQ9 used by override.
119[ 0.000000] ACPI: IRQ14 used by override.
120[ 0.000000] ACPI: IRQ15 used by override.
121[ 0.000000] Using ACPI (MADT) for SMP configuration information
122[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
123[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
124[ 0.000000] nr_irqs_gsi: 40
125[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
127[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0xbff9f000-0xbfffffff]
129[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff]
130[ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices
131[ 0.000000] Booting paravirtualized kernel on bare hardware
132[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
133[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
134[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
135[ 0.000000] pcpu-alloc: [0] 0 1 2 3
136[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034025
137[ 0.000000] Policy zone: Normal
138[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
139[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
140[ 0.000000] AGP: Checking aperture...
141[ 0.000000] AGP: No AGP bridge found
Raptor Engineering Automated Coreboot Test Standae74d492016-03-09 09:17:03 +0000[diff] [blame^]142[ 0.000000] AGP: Node 0: aperture [bus addr 0xe380000000-0xe381ffffff] (32MB)
Raptor Engineering Automated Coreboot Test Standff0d89b2016-03-08 23:32:01 +0000[diff] [blame]143[ 0.000000] Aperture beyond 4GB. Ignoring.
144[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
145[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
146[ 0.000000] AGP: This costs you 64MB of RAM
147[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
148[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
149[ 0.000000] Memory: 3978532K/4193524K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 214992K reserved)
150[ 0.000000] Hierarchical RCU implementation.
151[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
152[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
153[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
154[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
155[ 0.000000] spurious 8259A interrupt: IRQ7.
156[ 0.000000] Console: colour VGA+ 80x25
157[ 0.000000] console [ttyS0] enabled
158[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
159[ 0.000000] hpet clockevent registered
160[ 0.000000] tsc: Fast TSC calibration using PIT
Raptor Engineering Automated Coreboot Test Standae74d492016-03-09 09:17:03 +0000[diff] [blame^]161[ 0.000000] tsc: Detected 3015.580 MHz processor
Raptor Engineering Automated Coreboot Test Standff0d89b2016-03-08 23:32:01 +0000[diff] [blame]162[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
Raptor Engineering Automated Coreboot Test Standae74d492016-03-09 09:17:03 +0000[diff] [blame^]163[ 0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.16 BogoMIPS (lpj=12062320)
164[ 0.018886] pid_max: default: 32768 minimum: 301
165[ 0.020012] ACPI: Core revision 20140424
166[ 0.025663] ACPI: All ACPI Tables successfully acquired
167[ 0.028234] Security Framework initialized
168[ 0.032013] AppArmor: AppArmor disabled by boot time parameter
169[ 0.036002] Yama: disabled by default; enable with sysctl kernel.yama.*
170[ 0.044251] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
171[ 0.053969] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
172[ 0.057127] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Raptor Engineering Automated Coreboot Test Standff0d89b2016-03-08 23:32:01 +0000[diff] [blame]173[ 0.060011] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Raptor Engineering Automated Coreboot Test Standae74d492016-03-09 09:17:03 +0000[diff] [blame^]174[ 0.068336] Initializing cgroup subsys memory
175[ 0.072010] Initializing cgroup subsys devices
176[ 0.076009] Initializing cgroup subsys freezer
177[ 0.080004] Initializing cgroup subsys net_cls
178[ 0.084007] Initializing cgroup subsys blkio
179[ 0.088005] Initializing cgroup subsys perf_event
180[ 0.092003] Initializing cgroup subsys net_prio
181[ 0.096029] tseg: 0000000000
182[ 0.096035] CPU: Physical Processor ID: 0
183[ 0.100001] CPU: Processor Core ID: 0
184[ 0.104002] mce: CPU supports 5 MCE banks
185[ 0.108008] LVT offset 0 assigned for vector 0xf9
186[ 0.112003] process: using AMD E400 aware idle routine
187[ 0.116003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Raptor Engineering Automated Coreboot Test Standff0d89b2016-03-08 23:32:01 +0000[diff] [blame]188Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
189tlb_flushall_shift: 6
Raptor Engineering Automated Coreboot Test Standae74d492016-03-09 09:17:03 +0000[diff] [blame^]190[ 0.124058] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
191[ 0.132673] ftrace: allocating 21614 entries in 85 pages
192[ 0.144432] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
193[ 0.190562] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03)
194[ 0.200000] Performance Events: AMD PMU driver.
195[ 0.200002] ... version: 0
196[ 0.204000] ... bit width: 48
197[ 0.208000] ... generic registers: 4
198[ 0.212000] ... value mask: 0000ffffffffffff
199[ 0.216000] ... max period: 00007fffffffffff
200[ 0.220000] ... fixed-purpose events: 0
201[ 0.224000] ... event mask: 000000000000000f
202[ 0.229510] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
203[ 0.232157] x86: Booting SMP configuration:
204[ 0.236001] .... node #0, CPUs: #1 #2 #3
205[ 0.508076] x86: Booted up 1 node, 4 CPUs
206[ 0.512002] smpboot: Total of 4 processors activated (24123.69 BogoMIPS)
207[ 0.520104] devtmpfs: initialized
208[ 0.529246] pinctrl core: initialized pinctrl subsystem
209[ 0.532096] NET: Registered protocol family 16
210[ 0.536143] cpuidle: using governor ladder
211[ 0.540002] cpuidle: using governor menu
212[ 0.544005] node 0 link 1: io port [1000, 5fff]
213[ 0.544008] TOM: 00000000c0000000 aka 3072M
214[ 0.548002] node 0 link 1: mmio [a0000, bffff]
215[ 0.548005] node 0 link 1: mmio [fc000000, fc5fffff]
216[ 0.548006] node 0 link 1: mmio [f8000000, fbffffff]
217[ 0.548007] TOM2: 0000000140000000 aka 5120M
218[ 0.552002] bus: [bus 00-08] on node 0 link 1
219[ 0.552003] bus: 00 [io 0x0000-0xffff]
220[ 0.552004] bus: 00 [mem 0x000a0000-0x000bffff]
221[ 0.552006] bus: 00 [mem 0xc0000000-0xffffffff]
222[ 0.552007] bus: 00 [mem 0x140000000-0xfcffffffff]
223[ 0.552062] ACPI: bus type PCI registered
224[ 0.556002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
225[ 0.560095] PCI: Using configuration type 1 for base access
226[ 0.580088] ACPI: Added _OSI(Module Device)
227[ 0.584002] ACPI: Added _OSI(Processor Device)
228[ 0.588001] ACPI: Added _OSI(3.0 _SCP Extensions)
229[ 0.592001] ACPI: Added _OSI(Processor Aggregator Device)
230[ 0.601119] ACPI: Interpreter enabled
231[ 0.604009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
232[ 0.612001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
233[ 0.622188] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
234[ 0.632004] ACPI: (supports S0 S1 S5)
235[ 0.636001] ACPI: Using IOAPIC for interrupt routing
236[ 0.640029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
237[ 0.649596] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08])
238[ 0.652005] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
239[ 0.656011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
240[ 0.661646] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
241[ 0.664005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
242[ 0.668115] PCI host bridge to bus 0000:00
243[ 0.672002] pci_bus 0000:00: root bus resource [bus 00-08]
244[ 0.676002] pci_bus 0000:00: root bus resource [io 0x0d00-0x5fff]
245[ 0.680001] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
246[ 0.684001] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff]
247[ 0.688001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
248[ 0.692002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
249[ 0.696010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
250[ 0.696124] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
251[ 0.696129] pci 0000:00:01.0: reg 0x10: [io 0x4c00-0x4c7f]
252[ 0.696202] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
253[ 0.696208] pci 0000:00:01.1: reg 0x10: [io 0x5000-0x501f]
254[ 0.696217] pci 0000:00:01.1: reg 0x20: [io 0x4c80-0x4cbf]
255[ 0.696220] pci 0000:00:01.1: reg 0x24: [io 0x4cc0-0x4cff]
256[ 0.696231] pci 0000:00:01.1: PME# supported from D3hot D3cold
257[ 0.696297] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
258[ 0.696303] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff]
259[ 0.696323] pci 0000:00:02.0: supports D1 D2
260[ 0.696325] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
261[ 0.696355] pci 0000:00:02.0: System wakeup disabled by ACPI
262[ 0.700042] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
263[ 0.700049] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff]
264[ 0.700074] pci 0000:00:02.1: supports D1 D2
265[ 0.700075] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
266[ 0.704030] pci 0000:00:02.1: System wakeup disabled by ACPI
267[ 0.708049] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
268[ 0.708062] pci 0000:00:06.0: reg 0x20: [io 0x5020-0x502f]
269[ 0.708068] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
270[ 0.712001] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
271[ 0.716001] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
272[ 0.720001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
273[ 0.724064] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
274[ 0.724069] pci 0000:00:07.0: reg 0x10: [io 0x5050-0x5057]
275[ 0.724073] pci 0000:00:07.0: reg 0x14: [io 0x5070-0x5073]
276[ 0.724076] pci 0000:00:07.0: reg 0x18: [io 0x5058-0x505f]
277[ 0.724080] pci 0000:00:07.0: reg 0x1c: [io 0x5074-0x5077]
278[ 0.724083] pci 0000:00:07.0: reg 0x20: [io 0x5030-0x503f]
279[ 0.724087] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff]
280[ 0.724151] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
281[ 0.724157] pci 0000:00:08.0: reg 0x10: [io 0x5060-0x5067]
282[ 0.724160] pci 0000:00:08.0: reg 0x14: [io 0x5078-0x507b]
283[ 0.724164] pci 0000:00:08.0: reg 0x18: [io 0x5068-0x506f]
284[ 0.724167] pci 0000:00:08.0: reg 0x1c: [io 0x507c-0x507f]
285[ 0.724171] pci 0000:00:08.0: reg 0x20: [io 0x5040-0x504f]
286[ 0.724174] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff]
287[ 0.724238] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
288[ 0.724278] pci 0000:00:09.0: System wakeup disabled by ACPI
289[ 0.728042] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
290[ 0.728062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.728092] pci 0000:00:0b.0: System wakeup disabled by ACPI
292[ 0.732042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
293[ 0.732061] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
294[ 0.732091] pci 0000:00:0c.0: System wakeup disabled by ACPI
295[ 0.736041] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
296[ 0.736060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
297[ 0.736090] pci 0000:00:0d.0: System wakeup disabled by ACPI
298[ 0.740041] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
299[ 0.740060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
300[ 0.740091] pci 0000:00:0e.0: System wakeup disabled by ACPI
301[ 0.744046] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
302[ 0.744114] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
303[ 0.744176] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
304[ 0.744237] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
305[ 0.744301] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
306[ 0.744367] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
307[ 0.744428] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
308[ 0.744489] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
309[ 0.744588] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
310[ 0.744597] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
311[ 0.744603] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff]
312[ 0.744609] pci 0000:01:04.0: reg 0x18: [io 0x3000-0x307f]
313[ 0.744639] pci 0000:01:04.0: supports D1 D2
314[ 0.744692] pci 0000:00:09.0: PCI bridge to [bus 01]
315[ 0.748002] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
316[ 0.748005] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
317[ 0.748007] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
318[ 0.748058] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
319[ 0.748070] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit]
320[ 0.748093] pci 0000:02:00.0: reg 0x30: [mem 0x0d080000-0x0d08ffff pref]
321[ 0.748133] pci 0000:02:00.0: PME# supported from D3hot D3cold
322[ 0.748185] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
323[ 0.752007] pci 0000:00:0b.0: PCI bridge to [bus 02]
324[ 0.756003] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff]
325[ 0.756054] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
326[ 0.756066] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit]
327[ 0.756127] pci 0000:03:00.0: PME# supported from D3hot D3cold
328[ 0.756179] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
329[ 0.760005] pci 0000:00:0c.0: PCI bridge to [bus 03]
330[ 0.764003] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff]
331[ 0.764042] pci 0000:00:0d.0: PCI bridge to [bus 04]
332[ 0.768047] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400
333[ 0.768087] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
334[ 0.768135] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
335[ 0.772004] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
336[ 0.776002] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff]
337[ 0.776004] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff]
338[ 0.776049] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400
339[ 0.776097] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
340[ 0.776146] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
341[ 0.780008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400
342[ 0.780056] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
343[ 0.780105] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
344[ 0.784020] pci 0000:05:00.0: PCI bridge to [bus 06-08]
345[ 0.788005] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff]
346[ 0.788009] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff]
347[ 0.788070] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000
348[ 0.788082] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff]
349[ 0.788092] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff]
350[ 0.788101] pci 0000:07:00.0: reg 0x18: [io 0x1000-0x101f]
351[ 0.788132] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref]
352[ 0.788174] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
353[ 0.788237] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000
354[ 0.788249] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff]
355[ 0.788258] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff]
356[ 0.788267] pci 0000:07:00.1: reg 0x18: [io 0x1020-0x103f]
357[ 0.788299] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref]
358[ 0.792029] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
359[ 0.792086] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
360[ 0.796009] pci 0000:06:00.0: PCI bridge to [bus 07]
361[ 0.800005] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff]
362[ 0.800009] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff]
363[ 0.800072] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000
364[ 0.800084] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff]
365[ 0.800093] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff]
366[ 0.800103] pci 0000:08:00.0: reg 0x18: [io 0x2000-0x201f]
367[ 0.800134] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref]
368[ 0.800175] pci 0000:08:00.0: PME# supported from D0 D3hot
369[ 0.800239] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000
370[ 0.800251] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff]
371[ 0.800260] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff]
372[ 0.800269] pci 0000:08:00.1: reg 0x18: [io 0x2020-0x203f]
373[ 0.800301] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref]
374[ 0.800342] pci 0000:08:00.1: PME# supported from D0 D3hot
375[ 0.800399] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
376[ 0.804009] pci 0000:06:01.0: PCI bridge to [bus 08]
377[ 0.808005] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff]
378[ 0.808009] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff]
379[ 0.808044] pci_bus 0000:00: on NUMA node 0
380[ 0.808102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
381[ 0.816346] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
382[ 0.821548] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
383[ 0.829599] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
384[ 0.836247] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
385[ 0.844247] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
386[ 0.850711] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
387[ 0.853542] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
388[ 0.857546] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
389[ 0.862711] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
390[ 0.869877] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
391[ 0.877216] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
392[ 0.881543] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
393[ 0.889188] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
394[ 0.896246] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
395[ 0.902709] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
396[ 0.906709] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
397[ 0.915561] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
398[ 0.917877] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
399[ 0.924246] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
400[ 0.929877] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
401[ 0.937372] ACPI: Enabled 1 GPEs in block 00 to 1F
402[ 0.940094] vgaarb: setting as boot device: PCI:0000:01:04.0
403[ 0.944000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
404[ 0.956008] vgaarb: loaded
405[ 0.958715] vgaarb: bridge control possible 0000:01:04.0
406[ 0.964117] PCI: Using ACPI for IRQ routing
407[ 0.968004] PCI: pci_cache_line_size set to 64 bytes
408[ 0.968064] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
409[ 0.968067] e820: reserve RAM buffer [mem 0xbff9f000-0xbfffffff]
410[ 0.968256] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
411[ 0.972005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
412[ 0.980555] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
413[ 0.988040] Switched to clocksource hpet
414[ 1.000372] pnp: PnP ACPI init
415[ 1.003447] ACPI: bus type PNP registered
416[ 1.007841] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
417[ 1.007893] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
418[ 1.007950] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
419[ 1.008008] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
420[ 1.008040] pnp 00:04: [dma 2]
421[ 1.008067] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
422[ 1.008083] pnp: PnP ACPI: found 5 devices
423[ 1.012176] ACPI: bus type PNP unregistered
424[ 1.023715] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d080000-0x0d08ffff pref]: no compatible bridge window
425[ 1.033678] pci 0000:00:09.0: PCI bridge to [bus 01]
426[ 1.038646] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
427[ 1.044738] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
428[ 1.051524] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
429[ 1.058748] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref]
430[ 1.065964] pci 0000:00:0b.0: PCI bridge to [bus 02]
431[ 1.070927] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff]
432[ 1.077715] pci 0000:00:0c.0: PCI bridge to [bus 03]
433[ 1.082679] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff]
434[ 1.089467] pci 0000:00:0d.0: PCI bridge to [bus 04]
435[ 1.094435] pci 0000:06:00.0: PCI bridge to [bus 07]
436[ 1.099397] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff]
437[ 1.105493] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff]
438[ 1.112283] pci 0000:06:01.0: PCI bridge to [bus 08]
439[ 1.117242] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff]
440[ 1.123338] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff]
441[ 1.130127] pci 0000:05:00.0: PCI bridge to [bus 06-08]
442[ 1.135346] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff]
443[ 1.141442] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff]
444[ 1.148231] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
445[ 1.153451] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff]
446[ 1.159535] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff]
447[ 1.166325] pci_bus 0000:00: resource 4 [io 0x0d00-0x5fff]
448[ 1.166327] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
449[ 1.166329] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff]
450[ 1.166331] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
451[ 1.166333] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
452[ 1.166335] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
453[ 1.166337] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff]
454[ 1.166339] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
455[ 1.166341] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff]
456[ 1.166343] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff]
457[ 1.166345] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
458[ 1.166347] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff]
459[ 1.166349] pci_bus 0000:06: resource 0 [io 0x1000-0x2fff]
460[ 1.166351] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff]
461[ 1.166353] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
462[ 1.166355] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff]
463[ 1.166358] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
464[ 1.166359] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
465[ 1.166435] NET: Registered protocol family 2
466[ 1.171115] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
467[ 1.178543] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
468[ 1.185463] TCP: Hash tables configured (established 32768 bind 32768)
469[ 1.192082] TCP: reno registered
470[ 1.195318] UDP hash table entries: 2048 (order: 4, 65536 bytes)
471[ 1.201370] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
472[ 1.207978] NET: Registered protocol family 1
473[ 1.212622] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
474[ 1.218594] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
475[ 1.224436] pci 0000:00:00.0: Found enabled HT MSI Mapping
476[ 1.229943] pci 0000:00:00.0: Found enabled HT MSI Mapping
477[ 1.235423] pci 0000:00:0b.0: Found disabled HT MSI Mapping
478[ 1.240998] pci 0000:00:00.0: Found enabled HT MSI Mapping
479[ 1.246506] pci 0000:00:00.0: Found enabled HT MSI Mapping
480[ 1.251994] pci 0000:00:0c.0: Found disabled HT MSI Mapping
481[ 1.257569] pci 0000:00:00.0: Found enabled HT MSI Mapping
482[ 1.263079] pci 0000:00:00.0: Found enabled HT MSI Mapping
483[ 1.268565] pci 0000:00:0d.0: Found disabled HT MSI Mapping
484[ 1.274139] pci 0000:00:00.0: Found enabled HT MSI Mapping
485[ 1.279653] pci 0000:00:00.0: Found enabled HT MSI Mapping
486[ 1.285135] pci 0000:00:0e.0: Found disabled HT MSI Mapping
487[ 1.290710] pci 0000:00:00.0: Found enabled HT MSI Mapping
488[ 1.296211] pci 0000:01:04.0: Video device with shadowed ROM
489[ 1.296236] PCI: CLS 64 bytes, default 64
490[ 1.296315] Unpacking initramfs...
491[ 1.569142] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
492[ 1.576881] PCI-DMA: Disabling AGP.
493[ 1.580534] PCI-DMA: aperture base @ b4000000 size 65536 KB
494[ 1.586118] PCI-DMA: using GART IOMMU.
495[ 1.589886] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
496[ 1.599293] platform rtc_cmos: registered platform RTC device (no PNP device found)
497[ 1.607096] microcode: AMD CPU family 0xf not supported
498[ 1.612703] futex hash table entries: 1024 (order: 4, 65536 bytes)
499[ 1.618953] audit: initializing netlink subsys (disabled)
500[ 1.624382] audit: type=2000 audit(1457514902.624:1): initialized
501[ 1.630942] HugeTLB registered 2 MB page size, pre-allocated 0 pages
502[ 1.637321] zbud: loaded
503[ 1.640068] VFS: Disk quotas dquot_6.5.2
504[ 1.644017] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
505[ 1.650523] msgmni has been set to 7926
506[ 1.654802] alg: No test for stdrng (krng)
507[ 1.658950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
508[ 1.666409] io scheduler noop registered
509[ 1.670333] io scheduler deadline registered
510[ 1.674652] io scheduler cfq registered (default)
511[ 1.679636] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
512[ 1.685221] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
513[ 1.691898] GHES: HEST is not enabled!
514[ 1.695733] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
515[ 1.722273] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
516[ 1.749885] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
517[ 1.757628] Linux agpgart interface v0.103
518[ 1.761840] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
519[ 1.771994] serio: i8042 KBD port at 0x60,0x64 irq 1
520[ 1.776963] serio: i8042 AUX port at 0x60,0x64 irq 12
521[ 1.782280] mousedev: PS/2 mouse device common for all mice
522[ 1.787941] rtc_cmos rtc_cmos: RTC can wake from S4
523[ 1.792975] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
524[ 1.799352] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
525[ 1.807196] ledtrig-cpu: registered to indicate activity on CPUs
526[ 1.813303] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
527[ 1.819740] AMD IOMMUv2 functionality not available on this system
528[ 1.826025] TCP: cubic registered
529[ 1.829412] NET: Registered protocol family 10
530[ 1.834160] mip6: Mobile IPv6
531[ 1.837135] NET: Registered protocol family 17
532[ 1.841579] mpls_gso: MPLS GSO support
533[ 1.845768] registered taskstats version 1
534[ 1.850464] rtc_cmos rtc_cmos: setting system clock to 2016-03-09 09:15:04 UTC (1457514904)
535[ 1.858870] PM: Hibernation image not present or could not be loaded.
536[ 1.860180] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
537[ 1.868013] Write protecting the kernel read-only data: 8192k
538[ 1.876160] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
539[ 1.884445] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
540[ 1.903402] systemd-udevd[72]: starting version 215
541[ 1.908676] random: systemd-udevd urandom read with 3 bits of entropy available
542[ 1.926765] pps_core: LinuxPPS API ver. 1 registered
543[ 1.931732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
544[ 1.941105] ACPI: bus type USB registered
545[ 1.945219] usbcore: registered new interface driver usbfs
546[ 1.945271] PTP clock support registered
547[ 1.954633] usbcore: registered new interface driver hub
548[ 1.960246] tg3.c:v3.137 (May 11, 2014)
549[ 1.960416] SCSI subsystem initialized
550[ 1.960703] FDC 0 is a post-1991 82077
551[ 1.971652] tg3 0000:02:00.0: enabling device (0004 -> 0006)
552[ 1.978275] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
553[ 1.979203] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
554[ 1.989863] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
555[ 1.995959] usbcore: registered new device driver usb
556[ 1.996255] libata version 3.00 loaded.
557[ 2.001372] pata_amd 0000:00:06.0: version 0.4.1
558[ 2.001922] scsi0 : pata_amd
559[ 2.002277] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19
560[ 2.002375] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
561[ 2.002400] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X
562[ 2.020038] scsi1 : pata_amd
563[ 2.020255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
564[ 2.029552] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14
565[ 2.030558] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3
566[ 2.030561] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
567[ 2.030563] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
568[ 2.030564] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
569[ 2.030651] tg3 0000:03:00.0: enabling device (0004 -> 0006)
570[ 2.030812] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
571[ 2.082387] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15
572[ 2.089383] sata_nv 0000:00:07.0: version 3.5
573[ 2.089499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
574[ 2.089587] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
575[ 2.089903] scsi2 : sata_nv
576[ 2.090042] scsi3 : sata_nv
577[ 2.090086] ata3: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21
578[ 2.090087] ata4: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21
579[ 2.090237] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
580[ 2.090546] scsi4 : sata_nv
581[ 2.090646] scsi5 : sata_nv
582[ 2.090700] ata5: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20
583[ 2.090702] ata6: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20
584[ 2.147068] ohci-pci: OHCI PCI platform driver
585[ 2.151611] ehci-pci: EHCI PCI platform driver
586[ 2.151730] ohci-pci 0000:00:02.0: OHCI PCI host controller
587[ 2.151739] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
588[ 2.151789] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000
589[ 2.180773] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9
590[ 2.188699] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection
591[ 2.191706] tg3 0000:03:00.0 eth2: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9
592[ 2.191709] tg3 0000:03:00.0 eth2: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
593[ 2.191710] tg3 0000:03:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
594[ 2.191711] tg3 0000:03:00.0 eth2: dma_rwctrl[76180000] dma_mask[64-bit]
595[ 2.206075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
596[ 2.206076] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
597[ 2.206077] usb usb1: Product: OHCI PCI host controller
598[ 2.206079] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
599[ 2.206080] usb usb1: SerialNumber: 0000:00:02.0
600[ 2.206230] hub 1-0:1.0: USB hub found
601[ 2.206240] hub 1-0:1.0: 10 ports detected
602[ 2.216401] ehci-pci 0000:00:02.1: EHCI Host Controller
603[ 2.216407] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
604[ 2.216417] ehci-pci 0000:00:02.1: debug port 1
605[ 2.216450] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
606[ 2.216467] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000
607[ 2.290644] e1000e 0000:07:00.0 eth1: MAC: 0, PHY: 4, PBA No: D72468-003
608[ 2.297458] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18
609[ 2.301418] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
610[ 2.301454] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
611[ 2.301455] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
612[ 2.301456] usb usb2: Product: EHCI Host Controller
613[ 2.301458] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
614[ 2.301459] usb usb2: SerialNumber: 0000:00:02.1
615[ 2.301729] hub 2-0:1.0: USB hub found
616[ 2.301736] hub 2-0:1.0: 10 ports detected
617[ 2.346422] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
618[ 2.355737] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X
619[ 2.372092] hub 1-0:1.0: USB hub found
620[ 2.375858] hub 1-0:1.0: 10 ports detected
621[ 2.408026] ata3: SATA link down (SStatus 0 SControl 300)
622[ 2.408030] ata5: SATA link down (SStatus 0 SControl 300)
623[ 2.532776] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8
624[ 2.540693] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection
625[ 2.547641] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003
626[ 2.554482] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
627[ 2.563801] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X
628[ 2.736709] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb
629[ 2.744619] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection
630[ 2.751566] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003
631[ 2.758338] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
632[ 2.767651] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X
633[ 2.820014] ata4: SATA link down (SStatus 0 SControl 300)
634[ 2.940733] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca
635[ 2.948644] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection
636[ 2.955590] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003
637[ 3.136013] ata6: SATA link down (SStatus 0 SControl 300)
638[ 3.150697] FS-Cache: Loaded
639[ 3.156917] RPC: Registered named UNIX socket transport module.
640[ 3.164080] RPC: Registered udp transport module.
641[ 3.170172] RPC: Registered tcp transport module.
642[ 3.176263] RPC: Registered tcp NFSv4.1 backchannel transport module.
643[ 3.187651] FS-Cache: Netfs 'nfs' registered for caching
644[ 3.197927] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
645[ 3.244078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
646[ 4.969283] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
647[ 4.972514] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
648[ 4.972514] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
649[ 5.702332] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
650[ 5.715806] systemd[1]: Detected architecture 'x86-64'.
651[ 5.934467] systemd[1]: Inserted module 'autofs4'
652[ 5.939964] systemd[1]: Set hostname to <cb-test-tgt>.
653[ 6.023059] random: nonblocking pool is initialized
654[ 6.158976] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
655[ 6.171725] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
656[ 6.186975] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
657[ 6.194704] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
658[ 6.202283] systemd[1]: Expecting device dev-ttyS0.device...
659[ 6.216079] systemd[1]: Starting Remote File Systems (Pre).
660[ 6.232043] systemd[1]: Reached target Remote File Systems (Pre).
661[ 6.238174] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
662[ 6.260111] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
663[ 6.269563] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
664[ 6.277660] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
665[ 6.285579] systemd[1]: Starting Paths.
666[ 6.300053] systemd[1]: Reached target Paths.
667[ 6.304425] systemd[1]: Starting Encrypted Volumes.
668[ 6.320041] systemd[1]: Reached target Encrypted Volumes.
669[ 6.325455] systemd[1]: Starting Swap.
670[ 6.340056] systemd[1]: Reached target Swap.
671[ 6.344345] systemd[1]: Starting Root Slice.
672[ 6.356059] systemd[1]: Created slice Root Slice.
673[ 6.360781] systemd[1]: Starting User and Session Slice.
674[ 6.376054] systemd[1]: Created slice User and Session Slice.
675[ 6.381821] systemd[1]: Starting Delayed Shutdown Socket.
676[ 6.396059] systemd[1]: Listening on Delayed Shutdown Socket.
677[ 6.401821] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
678[ 6.420054] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
679[ 6.427035] systemd[1]: Starting Journal Socket (/dev/log).
680[ 6.444055] systemd[1]: Listening on Journal Socket (/dev/log).
681[ 6.449998] systemd[1]: Starting udev Kernel Socket.
682[ 6.464043] systemd[1]: Listening on udev Kernel Socket.
683[ 6.469370] systemd[1]: Starting udev Control Socket.
684[ 6.484042] systemd[1]: Listening on udev Control Socket.
685[ 6.489458] systemd[1]: Starting Journal Socket.
686[ 6.504042] systemd[1]: Listening on Journal Socket.
687[ 6.509024] systemd[1]: Starting System Slice.
688[ 6.524046] systemd[1]: Created slice System Slice.
689[ 6.528939] systemd[1]: Starting system-getty.slice.
690[ 6.544055] systemd[1]: Created slice system-getty.slice.
691[ 6.549466] systemd[1]: Starting system-serial\x2dgetty.slice.
692[ 6.564057] systemd[1]: Created slice system-serial\x2dgetty.slice.
693[ 6.570350] systemd[1]: Starting Increase datagram queue length...
694[ 6.588671] systemd[1]: Mounting Huge Pages File System...
695[ 6.604695] systemd[1]: Starting udev Coldplug all Devices...
696[ 6.852035] systemd[1]: Starting Load Kernel Modules...
697[ 6.868665] systemd[1]: Mounting POSIX Message Queue File System...
698[ 6.886943] systemd[1]: Started Set Up Additional Binary Formats.
699[ 6.893179] systemd[1]: Mounting Debug File System...
700[ 6.909082] systemd[1]: Starting Create list of required static device nodes for the current kernel...
701[ 6.932690] systemd[1]: Starting Slices.
702[ 6.944056] systemd[1]: Reached target Slices.
703[ 6.948527] systemd[1]: Starting Remount Root and Kernel File Systems...
704[ 6.972117] systemd[1]: Mounted Debug File System.
705[ 6.988110] systemd[1]: Mounted POSIX Message Queue File System.
706[ 7.004060] systemd[1]: Mounted Huge Pages File System.
707[ 7.020059] systemd[1]: Started Increase datagram queue length.
708[ 7.036057] systemd[1]: Started Load Kernel Modules.
709[ 7.056057] systemd[1]: Started Create list of required static device nodes for the current kernel.
710[ 7.076050] systemd[1]: Started Remount Root and Kernel File Systems.
711[ 7.092105] systemd[1]: Started udev Coldplug all Devices.
712[ 7.123270] systemd[1]: Started Various fixups to make systemd work better on Debian.
713[ 7.131132] systemd[1]: Starting Load/Save Random Seed...
714[ 7.148904] systemd[1]: Starting Create Static Device Nodes in /dev...
715[ 7.164662] systemd[1]: Mounted Configuration File System.
716[ 7.170184] systemd[1]: Starting Apply Kernel Variables...
717[ 7.184638] systemd[1]: Mounted FUSE Control File System.
718[ 7.190066] systemd[1]: Starting Syslog Socket.
719[ 7.204124] systemd[1]: Listening on Syslog Socket.
720[ 7.209094] systemd[1]: Starting Sockets.
721[ 7.224067] systemd[1]: Reached target Sockets.
722[ 7.228630] systemd[1]: Starting Journal Service...
723[ 7.252103] systemd[1]: Started Journal Service.
724[ 7.386494] systemd-udevd[173]: starting version 215
725[ 7.647165] systemd-journald[172]: Received request to flush runtime journal from PID 1
726[ 8.148679] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
727[ 8.157035] ACPI: Power Button [PWRB]
728[ 8.161085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
729[ 8.169586] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
730[ 8.169643] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
731[ 8.183165] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
732[ 8.192010] ACPI: Power Button [PWRF]
733[ 8.195817] EDAC MC: Ver: 3.0.0
734[ 8.199609] i2c i2c-0: nForce2 SMBus adapter at 0x4c80
735[ 8.206273] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0
736[ 8.211556] MCE: In-kernel MCE decoding enabled.
737[ 8.224151] AMD64 EDAC driver v3.4.0
738[ 8.228202] input: PC Speaker as /devices/platform/pcspkr/input/input4
739[ 8.228238] systemd-udevd[203]: renamed network interface eth1 to eth6
740[ 8.228446] EDAC amd64: DRAM ECC enabled.
741[ 8.228455] EDAC amd64: K8 revF or later detected (node 0).
742[ 8.228470] EDAC MC: DCT0 chip selects:
743[ 8.228471] EDAC amd64: MC: 0: 0MB 1: 0MB
744[ 8.228471] EDAC amd64: MC: 2: 0MB 3: 0MB
745[ 8.228473] EDAC amd64: MC: 4: 1024MB 5: 1024MB
746[ 8.228474] EDAC amd64: MC: 6: 1024MB 7: 1024MB
747[ 8.228512] EDAC amd64: CS4: Registered DDR2 RAM
748[ 8.228513] EDAC amd64: CS5: Registered DDR2 RAM
749[ 8.228513] EDAC amd64: CS6: Registered DDR2 RAM
750[ 8.228513] EDAC amd64: CS7: Registered DDR2 RAM
751[ 8.228737] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
752[ 8.228753] EDAC amd64: DRAM ECC disabled.
753[ 8.301609] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Raptor Engineering Automated Coreboot Test Standff0d89b2016-03-08 23:32:01 +0000[diff] [blame]754 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
755 (Note that use of the override may cause unknown side effects.)
Raptor Engineering Automated Coreboot Test Standae74d492016-03-09 09:17:03 +0000[diff] [blame^]756[ 8.325977] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
757[ 8.404196] kvm: Nested Virtualization enabled
758[ 8.417929] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
759[ 8.422999] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
760[ 8.428055] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
761[ 8.433111] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
762[ 8.438253] powernow_k8: fid 0xe (2200 MHz), vid 0x12
763[ 8.443313] powernow_k8: fid 0xc (2000 MHz), vid 0x12
764[ 8.448286] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
765[ 8.453778] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
766[ 8.459846] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
767[ 8.466285] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
768[ 8.472365] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
769[ 8.477506] powernow_k8: fid 0xe (2200 MHz), vid 0x12
770[ 8.482558] powernow_k8: fid 0xc (2000 MHz), vid 0x12
771[ 8.487620] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
772[ 8.494424] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00)
773[ 9.388277] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
774[ 39.715475] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****