Raptor Engineering Automated Coreboot Test Stand | 9f907f1 | 2017-05-08 13:12:41 +0000 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| 5 | [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386 |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| 13 | [ 0.000000] NX (Execute Disable) protection: active |
| 14 | [ 0.000000] SMBIOS 2.7 present. |
| 15 | [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 05/08/2017 |
| 16 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 17 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 18 | [ 0.000000] AGP: No AGP bridge found |
| 19 | [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| 20 | [ 0.000000] MTRR default type: uncachable |
| 21 | [ 0.000000] MTRR fixed ranges enabled: |
| 22 | [ 0.000000] 00000-9FFFF write-back |
| 23 | [ 0.000000] A0000-BFFFF uncachable |
| 24 | [ 0.000000] C0000-FFFFF write-back |
| 25 | [ 0.000000] MTRR variable ranges enabled: |
| 26 | [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| 27 | [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| 28 | [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| 29 | [ 0.000000] 3 disabled |
| 30 | [ 0.000000] 4 disabled |
| 31 | [ 0.000000] 5 disabled |
| 32 | [ 0.000000] 6 disabled |
| 33 | [ 0.000000] 7 disabled |
| 34 | [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| 35 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 36 | [ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000 |
| 37 | [ 0.000000] found SMP MP-table at [mem 0x000f0600-0x000f060f] mapped at [ffff8800000f0600] |
| 38 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 39 | [ 0.000000] Using GB pages for direct mapping |
| 40 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 41 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 42 | [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| 43 | [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| 44 | [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| 45 | [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| 46 | [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| 47 | [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| 48 | [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| 49 | [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| 50 | [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| 51 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff] |
| 52 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 53 | [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| 54 | [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| 55 | [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| 56 | [ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k |
| 57 | [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| 58 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 59 | [ 0.000000] ACPI: RSDP 0x00000000000F07D0 000024 (v02 CORE ) |
| 60 | [ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 61 | [ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 62 | [ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831) |
| 63 | [ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040 |
| 64 | [ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000EEA (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 65 | [ 0.000000] ACPI: TCPA 0x00000000BFFAE900 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 66 | [ 0.000000] ACPI: APIC 0x00000000BFFAE940 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 67 | [ 0.000000] ACPI: SRAT 0x00000000BFFAEA10 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 68 | [ 0.000000] ACPI: SLIT 0x00000000BFFAEB60 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 69 | [ 0.000000] ACPI: HPET 0x00000000BFFAEB90 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 70 | [ 0.000000] ACPI: SRAT 0x00000000BFFAEBD0 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 71 | [ 0.000000] ACPI: SLIT 0x00000000BFFAED20 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 72 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 73 | [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| 74 | [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| 75 | [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| 76 | [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| 77 | [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| 78 | [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| 79 | [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| 80 | [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| 81 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| 82 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| 83 | [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| 84 | [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| 85 | [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| 86 | [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| 87 | [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| 88 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| 89 | [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| 90 | [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| 91 | [ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff] |
| 92 | [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| 93 | [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| 94 | [ 0.000000] Zone ranges: |
| 95 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 96 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 97 | [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| 98 | [ 0.000000] Movable zone start for each node |
| 99 | [ 0.000000] Early memory node ranges |
| 100 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 101 | [ 0.000000] node 0: [mem 0x00100000-0xbff99fff] |
| 102 | [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| 103 | [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| 104 | [ 0.000000] On node 0 totalpages: 1048376 |
| 105 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 106 | [ 0.000000] DMA zone: 21 pages reserved |
| 107 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 108 | [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| 109 | [ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31 |
| 110 | [ 0.000000] Normal zone: 3584 pages used for memmap |
| 111 | [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| 112 | [ 0.000000] On node 1 totalpages: 262144 |
| 113 | [ 0.000000] Normal zone: 3584 pages used for memmap |
| 114 | [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| 115 | [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| 116 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 117 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 118 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| 119 | [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| 120 | [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| 121 | [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| 122 | [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| 123 | [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| 124 | [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| 125 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 126 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| 127 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| 128 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| 129 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| 130 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| 131 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| 132 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| 133 | [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| 134 | [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| 135 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 136 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| 137 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| 138 | [ 0.000000] ACPI: IRQ9 used by override. |
| 139 | [ 0.000000] ACPI: IRQ14 used by override. |
| 140 | [ 0.000000] ACPI: IRQ15 used by override. |
| 141 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 142 | [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| 143 | [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| 144 | [ 0.000000] nr_irqs_gsi: 40 |
| 145 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 146 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 147 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 148 | [ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff] |
| 149 | [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| 150 | [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| 151 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 152 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| 153 | [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| 154 | [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| 155 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| 156 | [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580 |
| 157 | [ 0.000000] Policy zone: Normal |
| 158 | [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386 |
| 159 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 160 | [ 0.000000] AGP: Checking aperture... |
| 161 | [ 0.000000] AGP: No AGP bridge found |
| 162 | [ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB) |
| 163 | [ 0.000000] Aperture beyond 4GB. Ignoring. |
| 164 | [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| 165 | [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| 166 | [ 0.000000] AGP: This costs you 64MB of RAM |
| 167 | [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| 168 | [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| 169 | [ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved) |
| 170 | [ 0.000000] Hierarchical RCU implementation. |
| 171 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 172 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| 173 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| 174 | [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| 175 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 176 | [ 0.000000] Console: colour *CGA 80x25 |
| 177 | [ 0.000000] console [ttyS0] enabled |
| 178 | [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| 179 | [ 0.000000] hpet clockevent registered |
| 180 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 181 | [ 0.000000] tsc: Detected 1909.789 MHz processor |
| 182 | [ 0.000150] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.57 BogoMIPS (lpj=7639156) |
| 183 | [ 0.010786] pid_max: default: 32768 minimum: 301 |
| 184 | [ 0.015432] ACPI: Core revision 20140424 |
| 185 | [ 0.021782] ACPI: All ACPI Tables successfully acquired |
| 186 | [ 0.027143] Security Framework initialized |
| 187 | [ 0.031270] AppArmor: AppArmor disabled by boot time parameter |
| 188 | [ 0.037116] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 189 | [ 0.044815] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| 190 | [ 0.057880] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 191 | [ 0.067599] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 192 | [ 0.074501] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 193 | [ 0.082321] Initializing cgroup subsys memory |
| 194 | [ 0.086701] Initializing cgroup subsys devices |
| 195 | [ 0.091167] Initializing cgroup subsys freezer |
| 196 | [ 0.095624] Initializing cgroup subsys net_cls |
| 197 | [ 0.100083] Initializing cgroup subsys blkio |
| 198 | [ 0.104377] Initializing cgroup subsys perf_event |
| 199 | [ 0.109089] Initializing cgroup subsys net_prio |
| 200 | [ 0.113664] tseg: 0000000000 |
| 201 | [ 0.113675] CPU: Physical Processor ID: 0 |
| 202 | [ 0.117696] CPU: Processor Core ID: 0 |
| 203 | [ 0.121378] mce: CPU supports 6 MCE banks |
| 204 | [ 0.125414] LVT offset 0 assigned for vector 0xf9 |
| 205 | [ 0.130143] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| 206 | Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| 207 | tlb_flushall_shift: 6 |
| 208 | [ 0.145491] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| 209 | [ 0.154494] ftrace: allocating 21614 entries in 85 pages |
| 210 | [ 0.169778] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| 211 | [ 0.215300] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| 212 | [ 0.332518] Performance Events: AMD PMU driver. |
| 213 | [ 0.337090] ... version: 0 |
| 214 | [ 0.341102] ... bit width: 48 |
| 215 | [ 0.345199] ... generic registers: 4 |
| 216 | [ 0.349211] ... value mask: 0000ffffffffffff |
| 217 | [ 0.354513] ... max period: 00007fffffffffff |
| 218 | [ 0.359842] ... fixed-purpose events: 0 |
| 219 | [ 0.363854] ... event mask: 000000000000000f |
| 220 | [ 0.371691] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 221 | [ 0.379895] x86: Booting SMP configuration: |
| 222 | [ 0.384083] .... node #0, CPUs: #1 #2 #3 |
| 223 | [ 0.428413] .... node #1, CPUs: #4 #5 #6 #7 |
| 224 | [ 0.581189] x86: Booted up 2 nodes, 8 CPUs |
| 225 | [ 0.585489] smpboot: Total of 8 processors activated (30557.54 BogoMIPS) |
| 226 | [ 0.597982] devtmpfs: initialized |
| 227 | [ 0.609299] pinctrl core: initialized pinctrl subsystem |
| 228 | [ 0.614695] NET: Registered protocol family 16 |
| 229 | [ 0.619364] cpuidle: using governor ladder |
| 230 | [ 0.623471] cpuidle: using governor menu |
| 231 | [ 0.627410] node 0 link 1: io port [1000, 3fff] |
| 232 | [ 0.627413] TOM: 00000000c0000000 aka 3072M |
| 233 | [ 0.631606] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| 234 | [ 0.631610] node 0 link 1: mmio [fc000000, fc3fffff] |
| 235 | [ 0.631613] node 0 link 1: mmio [f8000000, fbffffff] |
| 236 | [ 0.631615] TOM2: 0000000180000000 aka 6144M |
| 237 | [ 0.635894] bus: [bus 00-05] on node 0 link 1 |
| 238 | [ 0.635896] bus: 00 [io 0x0000-0xffff] |
| 239 | [ 0.635898] bus: 00 [mem 0xd0000000-0xffffffff] |
| 240 | [ 0.635899] bus: 00 [mem 0x180000000-0xfcffffffff] |
| 241 | [ 0.636004] ACPI: bus type PCI registered |
| 242 | [ 0.640019] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 243 | [ 0.646628] PCI: Using configuration type 1 for base access |
| 244 | [ 0.652207] PCI: Using configuration type 1 for extended access |
| 245 | [ 0.669333] ACPI: Added _OSI(Module Device) |
| 246 | [ 0.673524] ACPI: Added _OSI(Processor Device) |
| 247 | [ 0.677974] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 248 | [ 0.682686] ACPI: Added _OSI(Processor Aggregator Device) |
| 249 | [ 0.689170] ACPI: Executed 1 blocks of module-level executable AML code |
| 250 | [ 0.698353] ACPI: Interpreter enabled |
| 251 | [ 0.702036] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| 252 | [ 0.711301] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| 253 | [ 0.720573] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| 254 | [ 0.729846] ACPI: (supports S0 S1 S5) |
| 255 | [ 0.733516] ACPI: Using IOAPIC for interrupt routing |
| 256 | [ 0.738532] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 257 | [ 0.767054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| 258 | [ 0.773244] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 259 | [ 0.781457] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 260 | [ 0.820447] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| 261 | [ 0.830454] PCI host bridge to bus 0000:00 |
| 262 | [ 0.834562] pci_bus 0000:00: root bus resource [bus 00-05] |
| 263 | [ 0.840052] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| 264 | [ 0.846230] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 265 | [ 0.853109] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| 266 | [ 0.859980] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| 267 | [ 0.866859] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 268 | [ 0.873057] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| 269 | [ 0.873240] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| 270 | [ 0.873247] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| 271 | [ 0.873375] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| 272 | [ 0.873383] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| 273 | [ 0.873404] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| 274 | [ 0.873409] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| 275 | [ 0.873429] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| 276 | [ 0.873527] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| 277 | [ 0.873535] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| 278 | [ 0.873586] pci 0000:00:02.0: supports D1 D2 |
| 279 | [ 0.873592] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 280 | [ 0.873636] pci 0000:00:02.0: System wakeup disabled by ACPI |
| 281 | [ 0.879369] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| 282 | [ 0.879387] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| 283 | [ 0.879428] pci 0000:00:02.1: supports D1 D2 |
| 284 | [ 0.879431] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| 285 | [ 0.879473] pci 0000:00:02.1: System wakeup disabled by ACPI |
| 286 | [ 0.885201] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| 287 | [ 0.885228] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| 288 | [ 0.885244] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| 289 | [ 0.892376] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| 290 | [ 0.898906] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| 291 | [ 0.906045] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| 292 | [ 0.912678] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| 293 | [ 0.912689] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| 294 | [ 0.912694] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| 295 | [ 0.912699] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| 296 | [ 0.912703] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| 297 | [ 0.912708] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| 298 | [ 0.912713] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| 299 | [ 0.912876] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| 300 | [ 0.912884] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| 301 | [ 0.912889] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| 302 | [ 0.912893] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| 303 | [ 0.912898] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| 304 | [ 0.912902] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| 305 | [ 0.912907] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| 306 | [ 0.913015] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| 307 | [ 0.913095] pci 0000:00:09.0: System wakeup disabled by ACPI |
| 308 | [ 0.918815] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| 309 | [ 0.918865] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 310 | [ 0.918916] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| 311 | [ 0.924634] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| 312 | [ 0.924710] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 313 | [ 0.924754] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| 314 | [ 0.930481] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| 315 | [ 0.930535] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 316 | [ 0.930579] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| 317 | [ 0.936308] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| 318 | [ 0.936356] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 319 | [ 0.936399] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| 320 | [ 0.942134] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| 321 | [ 0.942269] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| 322 | [ 0.942395] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| 323 | [ 0.942493] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| 324 | [ 0.942650] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| 325 | [ 0.942779] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| 326 | [ 0.942989] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| 327 | [ 0.943097] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| 328 | [ 0.943246] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| 329 | [ 0.943373] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| 330 | [ 0.943582] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| 331 | [ 0.943611] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| 332 | [ 0.943618] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| 333 | [ 0.943630] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| 334 | [ 0.943675] pci 0000:01:04.0: supports D1 D2 |
| 335 | [ 0.943782] pci 0000:00:09.0: PCI bridge to [bus 01] |
| 336 | [ 0.948757] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| 337 | [ 0.948760] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| 338 | [ 0.948764] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| 339 | [ 0.948856] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| 340 | [ 0.948914] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| 341 | [ 0.948941] pci 0000:02:00.0: reg 0x30: [mem 0x7b620000-0x7b62ffff pref] |
| 342 | [ 0.949048] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| 343 | [ 0.949155] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 344 | [ 0.959158] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| 345 | [ 0.964126] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| 346 | [ 0.964214] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| 347 | [ 0.964250] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| 348 | [ 0.964351] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| 349 | [ 0.964438] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| 350 | [ 0.974440] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| 351 | [ 0.979409] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| 352 | [ 0.979482] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| 353 | [ 0.984533] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| 354 | [ 0.989519] pci_bus 0000:00: on NUMA node 0 |
| 355 | [ 0.989620] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| 356 | [ 0.995766] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| 357 | [ 1.001947] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| 358 | [ 1.009237] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| 359 | [ 1.016542] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| 360 | [ 1.023827] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| 361 | [ 1.031126] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| 362 | [ 1.037267] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| 363 | [ 1.043391] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| 364 | [ 1.050694] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| 365 | [ 1.057996] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| 366 | [ 1.065292] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| 367 | [ 1.071422] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| 368 | [ 1.077558] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| 369 | [ 1.084842] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| 370 | [ 1.092135] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| 371 | [ 1.099426] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| 372 | [ 1.107968] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| 373 | [ 1.114413] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| 374 | [ 1.120875] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| 375 | [ 1.127334] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| 376 | [ 1.134108] ACPI: Enabled 1 GPEs in block 00 to 1F |
| 377 | [ 1.139234] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| 378 | [ 1.144902] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| 379 | [ 1.152998] vgaarb: loaded |
| 380 | [ 1.155713] vgaarb: bridge control possible 0000:01:04.0 |
| 381 | [ 1.161186] PCI: Using ACPI for IRQ routing |
| 382 | [ 1.165378] PCI: pci_cache_line_size set to 64 bytes |
| 383 | [ 1.165434] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 384 | [ 1.165438] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff] |
| 385 | [ 1.165744] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| 386 | [ 1.172793] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| 387 | [ 1.177856] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| 388 | [ 1.186531] Switched to clocksource hpet |
| 389 | [ 1.202154] pnp: PnP ACPI init |
| 390 | [ 1.205256] ACPI: bus type PNP registered |
| 391 | [ 1.209787] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 392 | [ 1.209873] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| 393 | [ 1.209955] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| 394 | [ 1.210053] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| 395 | [ 1.210089] pnp 00:04: [dma 2] |
| 396 | [ 1.210136] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| 397 | [ 1.210167] pnp: PnP ACPI: found 5 devices |
| 398 | [ 1.214276] ACPI: bus type PNP unregistered |
| 399 | [ 1.226281] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7b620000-0x7b62ffff pref]: no compatible bridge window |
| 400 | [ 1.236233] pci 0000:00:09.0: PCI bridge to [bus 01] |
| 401 | [ 1.241202] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| 402 | [ 1.247310] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| 403 | [ 1.254105] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| 404 | [ 1.261335] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| 405 | [ 1.268562] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| 406 | [ 1.273537] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| 407 | [ 1.280331] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| 408 | [ 1.285301] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| 409 | [ 1.292096] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| 410 | [ 1.297069] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| 411 | [ 1.302043] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| 412 | [ 1.302045] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] |
| 413 | [ 1.302048] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff] |
| 414 | [ 1.302050] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff] |
| 415 | [ 1.302053] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| 416 | [ 1.302056] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| 417 | [ 1.302059] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| 418 | [ 1.302061] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| 419 | [ 1.302064] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| 420 | [ 1.302067] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| 421 | [ 1.302211] NET: Registered protocol family 2 |
| 422 | [ 1.307105] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| 423 | [ 1.314801] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 424 | [ 1.322144] TCP: Hash tables configured (established 65536 bind 65536) |
| 425 | [ 1.328754] TCP: reno registered |
| 426 | [ 1.332013] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| 427 | [ 1.338226] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| 428 | [ 1.345020] NET: Registered protocol family 1 |
| 429 | [ 1.349764] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| 430 | [ 1.355847] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| 431 | [ 1.361763] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 432 | [ 1.367290] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 433 | [ 1.372814] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| 434 | [ 1.378394] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 435 | [ 1.383945] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 436 | [ 1.389458] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| 437 | [ 1.395028] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 438 | [ 1.400588] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 439 | [ 1.406101] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| 440 | [ 1.411680] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 441 | [ 1.417214] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 442 | [ 1.422736] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| 443 | [ 1.428315] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| 444 | [ 1.433837] pci 0000:01:04.0: Video device with shadowed ROM |
| 445 | [ 1.433846] PCI: CLS 64 bytes, default 64 |
| 446 | [ 1.433956] Unpacking initramfs... |
| 447 | [ 1.817289] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| 448 | [ 1.825222] PCI-DMA: Disabling AGP. |
| 449 | [ 1.828898] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| 450 | [ 1.834486] PCI-DMA: using GART IOMMU. |
| 451 | [ 1.838248] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| 452 | [ 1.850174] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| 453 | [ 1.858338] microcode: CPU0: patch_level=0x01000084 |
| 454 | [ 1.863232] microcode: CPU1: patch_level=0x01000084 |
| 455 | [ 1.868133] microcode: CPU2: patch_level=0x01000084 |
| 456 | [ 1.873035] microcode: CPU3: patch_level=0x01000084 |
| 457 | [ 1.877939] microcode: CPU4: patch_level=0x01000084 |
| 458 | [ 1.882831] microcode: CPU5: patch_level=0x01000084 |
| 459 | [ 1.887723] microcode: CPU6: patch_level=0x01000084 |
| 460 | [ 1.892622] microcode: CPU7: patch_level=0x01000084 |
| 461 | [ 1.897611] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 462 | [ 1.906412] LVT offset 1 assigned for vector 0x400 |
| 463 | [ 1.911226] IBS: LVT offset 1 assigned |
| 464 | [ 1.915018] perf: AMD IBS detected (0x00000007) |
| 465 | [ 1.920178] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| 466 | [ 1.926571] audit: initializing netlink subsys (disabled) |
| 467 | [ 1.931995] audit: type=2000 audit(1494248992.668:1): initialized |
| 468 | [ 1.938869] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 469 | [ 1.945274] zbud: loaded |
| 470 | [ 1.948182] VFS: Disk quotas dquot_6.5.2 |
| 471 | [ 1.952152] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 472 | [ 1.958695] msgmni has been set to 9945 |
| 473 | [ 1.963063] alg: No test for stdrng (krng) |
| 474 | [ 1.967230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 475 | [ 1.974732] io scheduler noop registered |
| 476 | [ 1.978664] io scheduler deadline registered |
| 477 | [ 1.983021] io scheduler cfq registered (default) |
| 478 | [ 1.987949] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| 479 | [ 1.988075] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| 480 | [ 1.988187] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| 481 | [ 1.988294] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| 482 | [ 1.988448] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| 483 | [ 1.988471] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| 484 | [ 1.988495] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| 485 | [ 1.988516] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| 486 | [ 1.988539] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| 487 | [ 1.995509] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| 488 | [ 2.002045] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| 489 | [ 2.002056] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| 490 | [ 2.009018] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| 491 | [ 2.015550] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| 492 | [ 2.015560] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| 493 | [ 2.022523] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| 494 | [ 2.022534] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| 495 | [ 2.029500] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| 496 | [ 2.029530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 497 | [ 2.035133] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 498 | [ 2.041847] GHES: HEST is not enabled! |
| 499 | [ 2.045737] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 500 | [ 2.072388] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 501 | [ 2.100057] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| 502 | [ 2.107973] Linux agpgart interface v0.103 |
| 503 | [ 2.112293] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| 504 | [ 2.122900] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 505 | [ 2.127881] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 506 | [ 2.133156] mousedev: PS/2 mouse device common for all mice |
| 507 | [ 2.138825] rtc_cmos rtc_cmos: RTC can wake from S4 |
| 508 | [ 2.143961] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| 509 | [ 2.150364] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| 510 | [ 2.158229] ledtrig-cpu: registered to indicate activity on CPUs |
| 511 | [ 2.164417] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| 512 | [ 2.170866] AMD IOMMUv2 functionality not available on this system |
| 513 | [ 2.177191] TCP: cubic registered |
| 514 | [ 2.180689] NET: Registered protocol family 10 |
| 515 | [ 2.185555] mip6: Mobile IPv6 |
| 516 | [ 2.187143] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 517 | [ 2.197146] NET: Registered protocol family 17 |
| 518 | [ 2.201599] mpls_gso: MPLS GSO support |
| 519 | [ 2.206204] registered taskstats version 1 |
| 520 | [ 2.211063] rtc_cmos rtc_cmos: setting system clock to 2017-05-08 13:09:54 UTC (1494248994) |
| 521 | [ 2.219485] PM: Hibernation image not present or could not be loaded. |
| 522 | [ 2.221277] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| 523 | [ 2.229131] Write protecting the kernel read-only data: 8192k |
| 524 | [ 2.238336] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| 525 | [ 2.246936] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| 526 | [ 2.279617] systemd-udevd[98]: starting version 215 |
| 527 | [ 2.285322] random: systemd-udevd urandom read with 4 bits of entropy available |
| 528 | [ 2.313995] SCSI subsystem initialized |
| 529 | [ 2.318610] ACPI: bus type USB registered |
| 530 | [ 2.322787] usbcore: registered new interface driver usbfs |
| 531 | [ 2.328400] usbcore: registered new interface driver hub |
| 532 | [ 2.328520] pps_core: LinuxPPS API ver. 1 registered |
| 533 | [ 2.328522] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| 534 | [ 2.330547] FDC 0 is a post-1991 82077 |
| 535 | [ 2.351829] usbcore: registered new device driver usb |
| 536 | [ 2.357558] PTP clock support registered |
| 537 | [ 2.362483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 538 | [ 2.362913] libata version 3.00 loaded. |
| 539 | [ 2.369815] ehci-pci: EHCI PCI platform driver |
| 540 | [ 2.374649] ehci-pci 0000:00:02.1: EHCI Host Controller |
| 541 | [ 2.379942] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| 542 | [ 2.387417] ehci-pci 0000:00:02.1: debug port 1 |
| 543 | [ 2.392073] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| 544 | [ 2.392112] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| 545 | [ 2.398066] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 546 | [ 2.398134] tg3.c:v3.137 (May 11, 2014) |
| 547 | [ 2.398147] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| 548 | [ 2.398356] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| 549 | [ 2.406168] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| 550 | [ 2.406258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 551 | [ 2.406260] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 552 | [ 2.406262] usb usb1: Product: EHCI Host Controller |
| 553 | [ 2.406263] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| 554 | [ 2.406265] usb usb1: SerialNumber: 0000:00:02.1 |
| 555 | [ 2.406554] hub 1-0:1.0: USB hub found |
| 556 | [ 2.406564] hub 1-0:1.0: 10 ports detected |
| 557 | [ 2.406925] pata_amd 0000:00:06.0: version 0.4.1 |
| 558 | [ 2.407621] scsi0 : pata_amd |
| 559 | [ 2.465957] scsi1 : pata_amd |
| 560 | [ 2.469110] ohci-pci: OHCI PCI platform driver |
| 561 | [ 2.469128] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| 562 | [ 2.469130] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| 563 | [ 2.469193] sata_nv 0000:00:07.0: version 3.5 |
| 564 | [ 2.469458] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| 565 | [ 2.470006] scsi2 : sata_nv |
| 566 | [ 2.470227] scsi3 : sata_nv |
| 567 | [ 2.470354] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| 568 | [ 2.470357] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| 569 | [ 2.470608] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| 570 | [ 2.471120] scsi4 : sata_nv |
| 571 | [ 2.471354] scsi5 : sata_nv |
| 572 | [ 2.471434] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| 573 | [ 2.471438] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| 574 | [ 2.538941] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| 575 | [ 2.544590] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| 576 | [ 2.552086] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| 577 | [ 2.557475] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| 578 | [ 2.557478] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| 579 | [ 2.557479] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| 580 | [ 2.557481] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| 581 | [ 2.557628] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| 582 | [ 2.557799] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| 583 | [ 2.638629] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| 584 | [ 2.648893] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| 585 | [ 2.658633] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| 586 | [ 2.660118] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| 587 | [ 2.660119] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 588 | [ 2.660121] usb usb2: Product: OHCI PCI host controller |
| 589 | [ 2.660122] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| 590 | [ 2.660124] usb usb2: SerialNumber: 0000:00:02.0 |
| 591 | [ 2.660337] hub 2-0:1.0: USB hub found |
| 592 | [ 2.660348] hub 2-0:1.0: 10 ports detected |
| 593 | [ 2.704284] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| 594 | [ 2.782003] ata3: SATA link down (SStatus 0 SControl 300) |
| 595 | [ 2.809988] ata5: SATA link down (SStatus 0 SControl 300) |
| 596 | [ 2.845972] tsc: Refined TSC clocksource calibration: 1909.787 MHz |
| 597 | [ 3.109887] ata4: SATA link down (SStatus 0 SControl 300) |
| 598 | [ 3.425771] ata6: SATA link down (SStatus 0 SControl 300) |
| 599 | [ 3.449520] FS-Cache: Loaded |
| 600 | [ 3.457469] RPC: Registered named UNIX socket transport module. |
| 601 | [ 3.464539] RPC: Registered udp transport module. |
| 602 | [ 3.470632] RPC: Registered tcp transport module. |
| 603 | [ 3.476732] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 604 | [ 3.490187] FS-Cache: Netfs 'nfs' registered for caching |
| 605 | [ 3.506518] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| 606 | [ 3.553878] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 607 | [ 3.849723] Switched to clocksource tsc |
| 608 | [ 6.259943] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex |
| 609 | [ 6.266559] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| 610 | [ 6.273450] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 611 | [ 6.706807] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| 612 | [ 6.720513] systemd[1]: Detected architecture 'x86-64'. |
| 613 | [ 6.764631] systemd[1]: Inserted module 'autofs4' |
| 614 | [ 6.771054] systemd[1]: Set hostname to <cb-test-tgt>. |
| 615 | [ 6.928053] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| 616 | [ 6.940785] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| 617 | [ 6.956191] systemd[1]: Expecting device dev-ttyS0.device... |
| 618 | [ 6.972608] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| 619 | [ 6.980326] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 620 | [ 6.987917] systemd[1]: Starting Remote File Systems (Pre). |
| 621 | [ 7.004666] systemd[1]: Reached target Remote File Systems (Pre). |
| 622 | [ 7.010844] systemd[1]: Starting Encrypted Volumes. |
| 623 | [ 7.024648] systemd[1]: Reached target Encrypted Volumes. |
| 624 | [ 7.030146] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| 625 | [ 7.052562] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 626 | [ 7.061992] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| 627 | [ 7.070037] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 628 | [ 7.077975] systemd[1]: Starting Paths. |
| 629 | [ 7.092568] systemd[1]: Reached target Paths. |
| 630 | [ 7.096970] systemd[1]: Starting Swap. |
| 631 | [ 7.108542] systemd[1]: Reached target Swap. |
| 632 | [ 7.112835] systemd[1]: Starting Root Slice. |
| 633 | [ 7.124536] systemd[1]: Created slice Root Slice. |
| 634 | [ 7.129266] systemd[1]: Starting User and Session Slice. |
| 635 | [ 7.144609] systemd[1]: Created slice User and Session Slice. |
| 636 | [ 7.150421] systemd[1]: Starting Delayed Shutdown Socket. |
| 637 | [ 7.164522] systemd[1]: Listening on Delayed Shutdown Socket. |
| 638 | [ 7.170300] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| 639 | [ 7.188517] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 640 | [ 7.195494] systemd[1]: Starting Journal Socket (/dev/log). |
| 641 | [ 7.212504] systemd[1]: Listening on Journal Socket (/dev/log). |
| 642 | [ 7.218459] systemd[1]: Starting udev Kernel Socket. |
| 643 | [ 7.232503] systemd[1]: Listening on udev Kernel Socket. |
| 644 | [ 7.237848] systemd[1]: Starting udev Control Socket. |
| 645 | [ 7.252505] systemd[1]: Listening on udev Control Socket. |
| 646 | [ 7.257947] systemd[1]: Starting Journal Socket. |
| 647 | [ 7.272479] systemd[1]: Listening on Journal Socket. |
| 648 | [ 7.277484] systemd[1]: Starting System Slice. |
| 649 | [ 7.292477] systemd[1]: Created slice System Slice. |
| 650 | [ 7.297394] systemd[1]: Starting system-getty.slice. |
| 651 | [ 7.312482] systemd[1]: Created slice system-getty.slice. |
| 652 | [ 7.317914] systemd[1]: Starting system-serial\x2dgetty.slice. |
| 653 | [ 7.332470] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| 654 | [ 7.338790] systemd[1]: Starting Increase datagram queue length... |
| 655 | [ 7.357936] systemd[1]: Starting udev Coldplug all Devices... |
| 656 | [ 7.388745] systemd[1]: Starting Load Kernel Modules... |
| 657 | [ 7.407588] systemd[1]: Started Set Up Additional Binary Formats. |
| 658 | [ 7.413931] systemd[1]: Mounting Debug File System... |
| 659 | [ 7.429984] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| 660 | [ 7.453554] systemd[1]: Mounting POSIX Message Queue File System... |
| 661 | [ 7.469520] systemd[1]: Mounting Huge Pages File System... |
| 662 | [ 7.485590] systemd[1]: Starting Slices. |
| 663 | [ 7.500462] systemd[1]: Reached target Slices. |
| 664 | [ 7.504988] systemd[1]: Starting Remount Root and Kernel File Systems... |
| 665 | [ 7.532464] systemd[1]: Mounted Huge Pages File System. |
| 666 | [ 7.548435] systemd[1]: Mounted POSIX Message Queue File System. |
| 667 | [ 7.564398] systemd[1]: Mounted Debug File System. |
| 668 | [ 7.580378] systemd[1]: Started Increase datagram queue length. |
| 669 | [ 7.596396] systemd[1]: Started Load Kernel Modules. |
| 670 | [ 7.616378] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| 671 | [ 7.636437] systemd[1]: Started Remount Root and Kernel File Systems. |
| 672 | [ 7.652366] systemd[1]: Started udev Coldplug all Devices. |
| 673 | [ 7.697989] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| 674 | [ 7.705850] systemd[1]: Starting Load/Save Random Seed... |
| 675 | [ 7.722056] systemd[1]: Starting Create Static Device Nodes in /dev... |
| 676 | [ 7.741874] systemd[1]: Starting Apply Kernel Variables... |
| 677 | [ 7.758626] systemd[1]: Mounted Configuration File System. |
| 678 | [ 7.764534] systemd[1]: Mounted FUSE Control File System. |
| 679 | [ 7.770091] systemd[1]: Starting Syslog Socket. |
| 680 | [ 7.784366] systemd[1]: Listening on Syslog Socket. |
| 681 | [ 7.789326] systemd[1]: Starting Sockets. |
| 682 | [ 7.804379] systemd[1]: Reached target Sockets. |
| 683 | [ 7.808988] systemd[1]: Starting Journal Service... |
| 684 | [ 7.836364] systemd[1]: Started Journal Service. |
| 685 | [ 7.911761] systemd-udevd[211]: starting version 215 |
| 686 | [ 8.039034] systemd-journald[210]: Received request to flush runtime journal from PID 1 |
| 687 | [ 8.049095] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 688 | [ 8.058088] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| 689 | [ 8.067993] ACPI: Power Button [PWRB] |
| 690 | [ 8.073105] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| 691 | [ 8.080547] ACPI: Power Button [PWRF] |
| 692 | [ 8.085103] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| 693 | [ 8.093657] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| 694 | [ 8.102941] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| 695 | [ 8.114342] EDAC MC: Ver: 3.0.0 |
| 696 | [ 8.118119] acpi-cpufreq: overriding BIOS provided _PSD data |
| 697 | [ 8.130175] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| 698 | [ 8.135788] MCE: In-kernel MCE decoding enabled. |
| 699 | [ 8.136300] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| 700 | [ 8.147655] kvm: Nested Virtualization enabled |
| 701 | [ 8.152478] kvm: Nested Paging enabled |
| 702 | [ 8.152557] AMD64 EDAC driver v3.4.0 |
| 703 | [ 8.152664] EDAC amd64: DRAM ECC enabled. |
| 704 | [ 8.163808] EDAC amd64: F10h detected (node 0). |
| 705 | [ 8.163838] EDAC MC: DCT0 chip selects: |
| 706 | [ 8.163839] EDAC amd64: MC: 0: 0MB 1: 0MB |
| 707 | [ 8.163840] EDAC amd64: MC: 2: 0MB 3: 0MB |
| 708 | [ 8.163841] EDAC amd64: MC: 4: 0MB 5: 0MB |
| 709 | [ 8.163842] EDAC amd64: MC: 6: 2048MB 7: 2048MB |
| 710 | [ 8.163843] EDAC MC: DCT1 chip selects: |
| 711 | [ 8.163843] EDAC amd64: MC: 0: 0MB 1: 0MB |
| 712 | [ 8.163844] EDAC amd64: MC: 2: 0MB 3: 0MB |
| 713 | [ 8.163845] EDAC amd64: MC: 4: 0MB 5: 0MB |
| 714 | [ 8.163846] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| 715 | [ 8.163846] EDAC amd64: using x4 syndromes. |
| 716 | [ 8.163890] EDAC amd64: CS6: Registered DDR2 RAM |
| 717 | [ 8.163891] EDAC amd64: CS7: Registered DDR2 RAM |
| 718 | [ 8.164148] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| 719 | [ 8.164215] EDAC amd64: DRAM ECC enabled. |
| 720 | [ 8.168363] EDAC amd64: F10h detected (node 1). |
| 721 | [ 8.168401] EDAC MC: DCT0 chip selects: |
| 722 | [ 8.168403] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| 723 | [ 8.168405] EDAC amd64: MC: 2: 0MB 3: 0MB |
| 724 | [ 8.168406] EDAC amd64: MC: 4: 0MB 5: 0MB |
| 725 | [ 8.168407] EDAC amd64: MC: 6: 0MB 7: 0MB |
| 726 | [ 8.168408] EDAC MC: DCT1 chip selects: |
| 727 | [ 8.168409] EDAC amd64: MC: 0: 0MB 1: 0MB |
| 728 | [ 8.168410] EDAC amd64: MC: 2: 0MB 3: 0MB |
| 729 | [ 8.168411] EDAC amd64: MC: 4: 0MB 5: 0MB |
| 730 | [ 8.168412] EDAC amd64: MC: 6: 0MB 7: 0MB |
| 731 | [ 8.168413] EDAC amd64: using x4 syndromes. |
| 732 | [ 8.168414] EDAC amd64: MCT channel count: 1 |
| 733 | [ 8.168454] EDAC amd64: CS0: Registered DDR2 RAM |
| 734 | [ 8.168669] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| 735 | [ 8.168741] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| 736 | [ 8.440906] random: nonblocking pool is initialized |
| 737 | [ 38.595522] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |