Evgeny Zinoviev | fc36070 | 2020-05-17 18:42:12 +0300 | [diff] [blame] | 1 | *** Pre-CBMEM romstage console overflowed, log truncated! *** |
| 2 | patible clock, CAS pair. |
| 3 | Selected DRAM frequency: 666 MHz |
| 4 | Selected CAS latency : 9T |
| 5 | PLL busy... done in 80 us |
| 6 | MCU frequency is set at : 666 MHz |
| 7 | Done dimm mapping |
| 8 | Update PCI-E configuration space: |
| 9 | PCI(0, 0, 0)[a0] = 0 |
| 10 | PCI(0, 0, 0)[a4] = 8 |
| 11 | PCI(0, 0, 0)[bc] = 82a00000 |
| 12 | PCI(0, 0, 0)[a8] = 7d600000 |
| 13 | PCI(0, 0, 0)[ac] = 8 |
| 14 | PCI(0, 0, 0)[b8] = 80000000 |
| 15 | PCI(0, 0, 0)[b0] = 80a00000 |
| 16 | PCI(0, 0, 0)[b4] = 80800000 |
| 17 | Done memory map |
| 18 | Done io registers |
| 19 | t123: 1912, 6000, 7620 |
| 20 | ME: FW Partition Table : OK |
| 21 | ME: Bringup Loader Failure : NO |
| 22 | ME: Firmware Init Complete : NO |
| 23 | ME: Manufacturing Mode : YES |
| 24 | ME: Boot Options Present : NO |
| 25 | ME: Update In Progress : NO |
| 26 | ME: Current Working State : Initializing |
| 27 | ME: Current Operation State : Bring up |
| 28 | ME: Current Operation Mode : Debug or Disabled by AltDisableBit |
| 29 | ME: Error Code : No Error |
| 30 | ME: Progress Phase : BUP Phase |
| 31 | ME: Power Management Event : Pseudo-global reset |
| 32 | ME: Progress Phase State : Check to see if straps say ME DISABLED |
| 33 | ME: Wrong mode : 2 |
| 34 | ME: FWS2: 0x160a0140 |
| 35 | ME: Bist in progress: 0x0 |
| 36 | ME: ICC Status : 0x0 |
| 37 | ME: Invoke MEBx : 0x0 |
| 38 | ME: CPU replaced : 0x0 |
| 39 | ME: MBP ready : 0x0 |
| 40 | ME: MFS failure : 0x1 |
| 41 | ME: Warm reset req : 0x0 |
| 42 | ME: CPU repl valid : 0x1 |
| 43 | ME: (Reserved) : 0x0 |
| 44 | ME: FW update req : 0x0 |
| 45 | ME: (Reserved) : 0x0 |
| 46 | ME: Current state : 0xa |
| 47 | ME: Current PM event: 0x6 |
| 48 | ME: Progress code : 0x1 |
| 49 | PASSED! Tell ME that DRAM is ready |
| 50 | ME: ME is reporting as disabled, so not waiting for a response. |
| 51 | ME: FWS2: 0x160a0140 |
| 52 | ME: Bist in progress: 0x0 |
| 53 | ME: ICC Status : 0x0 |
| 54 | ME: Invoke MEBx : 0x0 |
| 55 | ME: CPU replaced : 0x0 |
| 56 | ME: MBP ready : 0x0 |
| 57 | ME: MFS failure : 0x1 |
| 58 | ME: Warm reset req : 0x0 |
| 59 | ME: CPU repl valid : 0x1 |
| 60 | ME: (Reserved) : 0x0 |
| 61 | ME: FW update req : 0x0 |
| 62 | ME: (Reserved) : 0x0 |
| 63 | ME: Current state : 0xa |
| 64 | ME: Current PM event: 0x6 |
| 65 | ME: Progress code : 0x1 |
| 66 | ME: Requested BIOS Action: No DID Ack received |
| 67 | ME: FW Partition Table : OK |
| 68 | ME: Bringup Loader Failure : NO |
| 69 | ME: Firmware Init Complete : NO |
| 70 | ME: Manufacturing Mode : YES |
| 71 | ME: Boot Options Present : NO |
| 72 | ME: Update In Progress : NO |
| 73 | ME: Current Working State : Initializing |
| 74 | ME: Current Operation State : Bring up |
| 75 | ME: Current Operation Mode : Debug or Disabled by AltDisableBit |
| 76 | ME: Error Code : No Error |
| 77 | ME: Progress Phase : BUP Phase |
| 78 | ME: Power Management Event : Pseudo-global reset |
| 79 | ME: Progress Phase State : Check to see if straps say ME DISABLED |
| 80 | memcfg DDR3 ref clock 133 MHz |
| 81 | memcfg DDR3 clock 1330 MHz |
| 82 | memcfg channel assignment: A: 0, B 1, C 2 |
| 83 | memcfg channel[0] config (00662020): |
| 84 | ECC inactive |
| 85 | enhanced interleave mode on |
| 86 | rank interleave on |
| 87 | DIMMA 8192 MB width x8 dual rank, selected |
| 88 | DIMMB 8192 MB width x8 dual rank |
| 89 | memcfg channel[1] config (00662020): |
| 90 | ECC inactive |
| 91 | enhanced interleave mode on |
| 92 | rank interleave on |
| 93 | DIMMA 8192 MB width x8 dual rank, selected |
| 94 | DIMMB 8192 MB width x8 dual rank |
| 95 | CBMEM: |
| 96 | IMD: root @ 0x7ffff000 254 entries. |
| 97 | IMD: root @ 0x7fffec00 62 entries. |
| 98 | External stage cache: |
| 99 | IMD: root @ 0x803ff000 254 entries. |
| 100 | IMD: root @ 0x803fec00 62 entries. |
| 101 | CBMEM entry for DIMM info: 0x7fffe960 |
| 102 | SMM Memory Map |
| 103 | SMRAM : 0x80000000 0x800000 |
| 104 | Subregion 0: 0x80000000 0x300000 |
| 105 | Subregion 1: 0x80300000 0x100000 |
| 106 | Subregion 2: 0x80400000 0x400000 |
| 107 | MTRR Range: Start=7f800000 End=80000000 (Size 800000) |
| 108 | MTRR Range: Start=80000000 End=80800000 (Size 800000) |
| 109 | MTRR Range: Start=ff800000 End=0 (Size 800000) |
| 110 | FMAP: area COREBOOT found @ 610200 (2031104 bytes) |
| 111 | CBFS: Locating 'fallback/postcar' |
| 112 | CBFS: Found @ offset 3a9c0 size 4a74 |
| 113 | Decompressing stage fallback/postcar @ 0x7ffd2fc0 (35472 bytes) |
| 114 | Loading module at 0x7ffd3000 with entry 0x7ffd3000. filesize: 0x4750 memsize: 0x8a50 |
| 115 | Processing 178 relocs. Offset value of 0x7dfd3000 |
| 116 | BS: romstage times (exec / console): total (unknown) / 1 ms |
| 117 | |
| 118 | |
| 119 | coreboot-4.12-92-g81f9ae9ff1 Sun May 17 14:19:15 UTC 2020 postcar starting (log level: 7)... |
| 120 | FMAP: area COREBOOT found @ 610200 (2031104 bytes) |
| 121 | CBFS: Locating 'fallback/ramstage' |
| 122 | CBFS: Found @ offset 1a040 size 1bc05 |
| 123 | Decompressing stage fallback/ramstage @ 0x7ff82fc0 (322832 bytes) |
| 124 | Loading module at 0x7ff83000 with entry 0x7ff83000. filesize: 0x394f8 memsize: 0x4ecd0 |
| 125 | Processing 3918 relocs. Offset value of 0x7f183000 |
| 126 | BS: postcar times (exec / console): total (unknown) / 0 ms |
| 127 | |
| 128 | |
| 129 | coreboot-4.12-92-g81f9ae9ff1 Sun May 17 14:19:15 UTC 2020 ramstage starting (log level: 7)... |
| 130 | Normal boot |
| 131 | Enumerating buses... |
| 132 | Root Device scanning... |
| 133 | CPU_CLUSTER: 0 enabled |
| 134 | DOMAIN: 0000 enabled |
| 135 | DOMAIN: 0000 scanning... |
| 136 | PCI: pci_scan_bus for bus 00 |
| 137 | PCI: 00:00.0 [8086/0154] enabled |
| 138 | PCI: Static device PCI: 00:01.0 not found, disabling it. |
| 139 | PCI: 00:02.0 [8086/0166] enabled |
| 140 | PCI: 00:04.0 [8086/0153] enabled |
| 141 | PCI: 00:14.0 [8086/1e31] enabled |
| 142 | PCI: 00:16.0 [8086/1e3a] enabled |
| 143 | PCI: 00:16.1: Disabling device |
| 144 | PCI: 00:16.2: Disabling device |
| 145 | PCI: Static device PCI: 00:16.3 not found, disabling it. |
| 146 | PCI: 00:19.0 [8086/1502] enabled |
| 147 | PCI: 00:1a.0 [8086/1e2d] enabled |
| 148 | PCI: 00:1b.0 [8086/1e20] enabled |
| 149 | PCH: PCIe Root Port coalescing is enabled |
| 150 | PCI: 00:1c.0 [8086/1e10] enabled |
| 151 | PCI: 00:1c.1 [8086/1e12] enabled |
| 152 | PCI: 00:1c.2 [8086/1e14] enabled |
| 153 | PCI: 00:1c.3: Disabling device |
| 154 | PCI: 00:1c.3 [8086/1e16] disabled |
| 155 | PCI: 00:1c.4: Disabling device |
| 156 | PCI: 00:1c.4: check set enabled |
| 157 | PCI: 00:1c.5: Disabling device |
| 158 | PCI: 00:1c.6: Disabling device |
| 159 | PCI: 00:1c.7: Disabling device |
| 160 | PCI: 00:1d.0 [8086/1e26] enabled |
| 161 | PCI: 00:1e.0: Disabling device |
| 162 | PCI: 00:1e.0 [8086/2448] disabled |
| 163 | PCI: 00:1f.0 [8086/1e55] enabled |
| 164 | PCI: 00:1f.2 [8086/1e01] enabled |
| 165 | PCI: 00:1f.3 [8086/1e22] enabled |
| 166 | PCI: 00:1f.5: Disabling device |
| 167 | PCI: 00:1f.5 [8086/1e09] disabled No operations |
| 168 | PCI: 00:1f.6: Disabling device |
| 169 | PCI: 00:1f.6 [8086/1e24] disabled No operations |
| 170 | PCI: Leftover static devices: |
| 171 | PCI: 00:01.0 |
| 172 | PCI: 00:16.1 |
| 173 | PCI: 00:16.2 |
| 174 | PCI: 00:16.3 |
| 175 | PCI: 00:1c.4 |
| 176 | PCI: 00:1c.5 |
| 177 | PCI: 00:1c.6 |
| 178 | PCI: 00:1c.7 |
| 179 | PCI: Check your devicetree.cb. |
| 180 | PCI: 00:1c.0 scanning... |
| 181 | PCI: pci_scan_bus for bus 01 |
| 182 | PCI: 01:00.0 [1180/e823] enabled |
| 183 | PCI: 01:00.3 [1180/e832] enabled |
| 184 | Enabling Common Clock Configuration |
| 185 | ASPM: Enabled L0s and L1 |
| 186 | PCIe: Max_Payload_Size adjusted to 128 |
| 187 | Enabling Common Clock Configuration |
| 188 | ASPM: Enabled L0s and L1 |
| 189 | PCIe: Max_Payload_Size adjusted to 128 |
| 190 | Failed to enable LTR for dev = PCI: 01:00.0 |
| 191 | Failed to enable LTR for dev = PCI: 01:00.3 |
| 192 | scan_bus: bus PCI: 00:1c.0 finished in 0 msecs |
| 193 | PCI: 00:1c.1 scanning... |
| 194 | PCI: pci_scan_bus for bus 02 |
| 195 | PCI: 02:00.0 [8086/0085] enabled |
| 196 | Enabling Common Clock Configuration |
| 197 | ASPM: Enabled L1 |
| 198 | PCIe: Max_Payload_Size adjusted to 128 |
| 199 | Failed to enable LTR for dev = PCI: 02:00.0 |
| 200 | scan_bus: bus PCI: 00:1c.1 finished in 0 msecs |
| 201 | PCI: 00:1c.2 scanning... |
| 202 | PCI: pci_scan_bus for bus 03 |
| 203 | scan_bus: bus PCI: 00:1c.2 finished in 0 msecs |
| 204 | PCI: 00:1f.0 scanning... |
| 205 | PMH7: ID 05 Revision 12 |
| 206 | PNP: 00ff.1 enabled |
| 207 | PNP: 0c31.0 enabled |
| 208 | H8: EC Firmware ID G4HT39WW-3.22, Version 3.01B |
| 209 | H8: BDC installed |
| 210 | H8: WWAN detection not implemented. Assuming WWAN installed |
| 211 | PNP: 00ff.2 enabled |
| 212 | Hybrid graphics: Switching panel to integrated GPU. |
| 213 | PNP: 00ff.f disabled |
| 214 | scan_bus: bus PCI: 00:1f.0 finished in 4 msecs |
| 215 | PCI: 00:1f.3 scanning... |
| 216 | bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled |
| 217 | bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled |
| 218 | bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled |
| 219 | bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled |
| 220 | bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled |
| 221 | bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled |
| 222 | bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled |
| 223 | bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled |
| 224 | scan_bus: bus PCI: 00:1f.3 finished in 0 msecs |
| 225 | scan_bus: bus DOMAIN: 0000 finished in 5 msecs |
| 226 | scan_bus: bus Root Device finished in 5 msecs |
| 227 | done |
| 228 | BS: BS_DEV_ENUMERATE run times (exec / console): 6 / 0 ms |
| 229 | FMAP: area RW_MRC_CACHE found @ 600000 (65536 bytes) |
| 230 | MRC: No data in cbmem for 'RW_MRC_CACHE'. |
| 231 | found VGA at PCI: 00:02.0 |
| 232 | Setting up VGA for PCI: 00:02.0 |
| 233 | Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| 234 | Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| 235 | Allocating resources... |
| 236 | Reading resources... |
| 237 | Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000. |
| 238 | TOUUD 0x87d600000 TOLUD 0x82a00000 TOM 0x800000000 |
| 239 | MEBASE 0x7ffff00000 |
| 240 | IGD decoded, subtracting 32M UMA and 2M GTT |
| 241 | TSEG base 0x80000000 size 8M |
| 242 | Available memory below 4GB: 2048M |
| 243 | Available memory above 4GB: 30678M |
| 244 | PNP: 00ff.1 missing read_resources |
| 245 | PNP: 00ff.2 missing read_resources |
| 246 | Done reading resources. |
| 247 | skipping PNP: 00ff.2@60 fixed resource, size=0! |
| 248 | skipping PNP: 00ff.2@62 fixed resource, size=0! |
| 249 | skipping PNP: 00ff.2@64 fixed resource, size=0! |
| 250 | skipping PNP: 00ff.2@66 fixed resource, size=0! |
| 251 | Setting resources... |
| 252 | PCI: 00:02.0 10 <- [0x00e1000000 - 0x00e13fffff] size 0x00400000 gran 0x16 mem64 |
| 253 | PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64 |
| 254 | PCI: 00:02.0 20 <- [0x0000003000 - 0x000000303f] size 0x00000040 gran 0x06 io |
| 255 | PCI: 00:04.0 10 <- [0x00e1630000 - 0x00e1637fff] size 0x00008000 gran 0x0f mem64 |
| 256 | PCI: 00:14.0 10 <- [0x00e1620000 - 0x00e162ffff] size 0x00010000 gran 0x10 mem64 |
| 257 | PCI: 00:16.0 10 <- [0x00e1641000 - 0x00e164100f] size 0x00000010 gran 0x04 mem64 |
| 258 | PCI: 00:19.0 10 <- [0x00e1600000 - 0x00e161ffff] size 0x00020000 gran 0x11 mem |
| 259 | PCI: 00:19.0 14 <- [0x00e163c000 - 0x00e163cfff] size 0x00001000 gran 0x0c mem |
| 260 | PCI: 00:19.0 18 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io |
| 261 | PCI: 00:1a.0 10 <- [0x00e163e000 - 0x00e163e3ff] size 0x00000400 gran 0x0a mem |
| 262 | PCI: 00:1b.0 10 <- [0x00e1638000 - 0x00e163bfff] size 0x00004000 gran 0x0e mem64 |
| 263 | PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io |
| 264 | PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem |
| 265 | PCI: 00:1c.0 20 <- [0x00e1400000 - 0x00e14fffff] size 0x00100000 gran 0x14 bus 01 mem |
| 266 | PCI: 01:00.0 10 <- [0x00e1401000 - 0x00e14010ff] size 0x00000100 gran 0x08 mem |
| 267 | PCI: 01:00.3 10 <- [0x00e1400000 - 0x00e14007ff] size 0x00000800 gran 0x0b mem |
| 268 | PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io |
| 269 | PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem |
| 270 | PCI: 00:1c.1 20 <- [0x00e1500000 - 0x00e15fffff] size 0x00100000 gran 0x14 bus 02 mem |
| 271 | PCI: 02:00.0 10 <- [0x00e1500000 - 0x00e1501fff] size 0x00002000 gran 0x0d mem64 |
| 272 | PCI: 00:1c.2 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 03 io |
| 273 | PCI: 00:1c.2 24 <- [0x00e0000000 - 0x00e07fffff] size 0x00800000 gran 0x14 bus 03 prefmem |
| 274 | PCI: 00:1c.2 20 <- [0x00e0800000 - 0x00e0ffffff] size 0x00800000 gran 0x14 bus 03 mem |
| 275 | NONE missing set_resources |
| 276 | PCI: 00:1d.0 10 <- [0x00e163f000 - 0x00e163f3ff] size 0x00000400 gran 0x0a mem |
| 277 | PNP: 00ff.1 missing set_resources |
| 278 | PNP: 00ff.2 missing set_resources |
| 279 | PCI: 00:1f.2 10 <- [0x0000003080 - 0x0000003087] size 0x00000008 gran 0x03 io |
| 280 | PCI: 00:1f.2 14 <- [0x0000003090 - 0x0000003093] size 0x00000004 gran 0x02 io |
| 281 | PCI: 00:1f.2 18 <- [0x0000003088 - 0x000000308f] size 0x00000008 gran 0x03 io |
| 282 | PCI: 00:1f.2 1c <- [0x0000003094 - 0x0000003097] size 0x00000004 gran 0x02 io |
| 283 | PCI: 00:1f.2 20 <- [0x0000003060 - 0x000000307f] size 0x00000020 gran 0x05 io |
| 284 | PCI: 00:1f.2 24 <- [0x00e163d000 - 0x00e163d7ff] size 0x00000800 gran 0x0b mem |
| 285 | PCI: 00:1f.3 10 <- [0x00e1640000 - 0x00e16400ff] size 0x00000100 gran 0x08 mem64 |
| 286 | Done setting resources. |
| 287 | Done allocating resources. |
| 288 | BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms |
| 289 | Enabling resources... |
| 290 | PCI: 00:00.0 subsystem <- 8086/0154 |
| 291 | PCI: 00:00.0 cmd <- 06 |
| 292 | PCI: 00:02.0 subsystem <- 17aa/21f5 |
| 293 | PCI: 00:02.0 cmd <- 03 |
| 294 | PCI: 00:04.0 cmd <- 02 |
| 295 | PCI: 00:14.0 subsystem <- 8086/1e31 |
| 296 | PCI: 00:14.0 cmd <- 102 |
| 297 | PCI: 00:16.0 subsystem <- 8086/1e3a |
| 298 | PCI: 00:16.0 cmd <- 02 |
| 299 | PCI: 00:19.0 subsystem <- 17aa/21f3 |
| 300 | PCI: 00:19.0 cmd <- 103 |
| 301 | PCI: 00:1a.0 subsystem <- 8086/1e2d |
| 302 | PCI: 00:1a.0 cmd <- 102 |
| 303 | PCI: 00:1b.0 subsystem <- 8086/1e20 |
| 304 | PCI: 00:1b.0 cmd <- 102 |
| 305 | PCI: 00:1c.0 bridge ctrl <- 0013 |
| 306 | PCI: 00:1c.0 subsystem <- 8086/1e10 |
| 307 | PCI: 00:1c.0 cmd <- 106 |
| 308 | PCI: 00:1c.1 bridge ctrl <- 0013 |
| 309 | PCI: 00:1c.1 subsystem <- 8086/1e12 |
| 310 | PCI: 00:1c.1 cmd <- 106 |
| 311 | PCI: 00:1c.2 bridge ctrl <- 0013 |
| 312 | PCI: 00:1c.2 subsystem <- 8086/1e14 |
| 313 | PCI: 00:1c.2 cmd <- 107 |
| 314 | PCI: 00:1d.0 subsystem <- 8086/1e26 |
| 315 | PCI: 00:1d.0 cmd <- 102 |
| 316 | PCI: 00:1f.0 subsystem <- 8086/1e55 |
| 317 | PCI: 00:1f.0 cmd <- 107 |
| 318 | PCI: 00:1f.2 subsystem <- 8086/1e03 |
| 319 | PCI: 00:1f.2 cmd <- 03 |
| 320 | PCI: 00:1f.3 subsystem <- 8086/1e22 |
| 321 | PCI: 00:1f.3 cmd <- 103 |
| 322 | PCI: 01:00.0 subsystem <- 1180/e823 |
| 323 | PCI: 01:00.0 cmd <- 06 |
| 324 | PCI: 01:00.3 cmd <- 02 |
| 325 | PCI: 02:00.0 cmd <- 02 |
| 326 | done. |
| 327 | Found TPM ST33ZP24 by ST Microelectronics |
| 328 | TPM: Startup |
| 329 | TPM: command 0x99 returned 0x0 |
| 330 | TPM: Asserting physical presence |
| 331 | TPM: command 0x4000000a returned 0x0 |
| 332 | TPM: command 0x65 returned 0x0 |
| 333 | TPM: flags disable=0, deactivated=0, nvlocked=1 |
| 334 | TPM: setup succeeded |
| 335 | BS: BS_DEV_INIT entry times (exec / console): 65 / 0 ms |
| 336 | Initializing devices... |
| 337 | CPU_CLUSTER: 0 init |
| 338 | MTRR: Physical address space: |
| 339 | 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 |
| 340 | 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 |
| 341 | 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 |
| 342 | 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 |
| 343 | 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 |
| 344 | 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 |
| 345 | 0x0000000100000000 - 0x000000087d600000 size 0x77d600000 type 6 |
| 346 | MTRR: Fixed MSR 0x250 0x0606060606060606 |
| 347 | MTRR: Fixed MSR 0x258 0x0606060606060606 |
| 348 | MTRR: Fixed MSR 0x259 0x0000000000000000 |
| 349 | MTRR: Fixed MSR 0x268 0x0606060606060606 |
| 350 | MTRR: Fixed MSR 0x269 0x0606060606060606 |
| 351 | MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| 352 | MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| 353 | MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| 354 | MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| 355 | MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| 356 | MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| 357 | CPU physical address size: 36 bits |
| 358 | MTRR: default type WB/UC MTRR counts: 4/6. |
| 359 | MTRR: WB selected as default type. |
| 360 | MTRR: 0 base 0x0000000080000000 mask 0x0000000fc0000000 type 0 |
| 361 | MTRR: 1 base 0x00000000c0000000 mask 0x0000000ff0000000 type 0 |
| 362 | MTRR: 2 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 |
| 363 | MTRR: 3 base 0x00000000e0000000 mask 0x0000000fe0000000 type 0 |
| 364 | |
| 365 | MTRR check |
| 366 | Fixed MTRRs : Enabled |
| 367 | Variable MTRRs: Enabled |
| 368 | |
| 369 | CPU has 4 cores, 8 threads enabled. |
| 370 | Setting up SMI for CPU |
| 371 | Will perform SMM setup. |
| 372 | FMAP: area COREBOOT found @ 610200 (2031104 bytes) |
| 373 | CBFS: Locating 'cpu_microcode_blob.bin' |
| 374 | CBFS: Found @ offset 137c0 size 6800 |
| 375 | microcode: sig=0x306a9 pf=0x10 revision=0x21 |
| 376 | CPU: Intel(R) Core(TM) i7-3940XM CPU @ 3.00GHz. |
| 377 | Loading module at 0x00030000 with entry 0x00030000. filesize: 0x170 memsize: 0x170 |
| 378 | Processing 16 relocs. Offset value of 0x00030000 |
| 379 | Attempting to start 7 APs |
| 380 | Waiting for 10ms after sending INIT. |
| 381 | Waiting for 1st SIPI to complete...done. |
| 382 | Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1. |
| 383 | done. |
| 384 | AP: slot 2 apic_id 5. |
| 385 | AP: slot 7 apic_id 7. |
| 386 | AP: slot 3 apic_id 3. |
| 387 | AP: slot 4 apic_id 4. |
| 388 | AP: slot 6 apic_id 6. |
| 389 | AP: slot 5 apic_id 2. |
| 390 | Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1b8 memsize: 0x1b8 |
| 391 | Processing 13 relocs. Offset value of 0x00038000 |
| 392 | SMM Module: stub loaded at 0x00038000. Will call 0x7ffa2717(0x00000000) |
| 393 | Installing SMM handler to 0x80000000 |
| 394 | Loading module at 0x80010000 with entry 0x80010614. filesize: 0x1d50 memsize: 0x5da8 |
| 395 | Processing 84 relocs. Offset value of 0x80010000 |
| 396 | Loading module at 0x80008000 with entry 0x80008000. filesize: 0x1b8 memsize: 0x1b8 |
| 397 | Processing 13 relocs. Offset value of 0x80008000 |
| 398 | SMM Module: placing jmp sequence at 0x80007c00 rel16 0x03fd |
| 399 | SMM Module: placing jmp sequence at 0x80007800 rel16 0x07fd |
| 400 | SMM Module: placing jmp sequence at 0x80007400 rel16 0x0bfd |
| 401 | SMM Module: placing jmp sequence at 0x80007000 rel16 0x0ffd |
| 402 | SMM Module: placing jmp sequence at 0x80006c00 rel16 0x13fd |
| 403 | SMM Module: placing jmp sequence at 0x80006800 rel16 0x17fd |
| 404 | SMM Module: placing jmp sequence at 0x80006400 rel16 0x1bfd |
| 405 | SMM Module: stub loaded at 0x80008000. Will call 0x80010614(0x00000000) |
| 406 | Initializing Southbridge SMI... |
| 407 | |
| 408 | New SMBASE 0x80000000 |
| 409 | In relocation handler: cpu 0 |
| 410 | New SMBASE=0x80000000 IEDBASE=0x80400000 |
| 411 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 412 | Relocation complete. |
| 413 | microcode: Update skipped, already up-to-date |
| 414 | New SMBASE 0x7ffffc00 |
| 415 | In relocation handler: cpu 1 |
| 416 | New SMBASE=0x7ffffc00 IEDBASE=0x80400000 |
| 417 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 418 | Relocation complete. |
| 419 | microcode: Update skipped, already up-to-date |
| 420 | New SMBASE 0x7ffff400 |
| 421 | In relocation handler: cpu 3 |
| 422 | New SMBASE=0x7ffff400 IEDBASE=0x80400000 |
| 423 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 424 | Relocation complete. |
| 425 | microcode: Update skipped, already up-to-date |
| 426 | New SMBASE 0x7ffff800 |
| 427 | In relocation handler: cpu 2 |
| 428 | New SMBASE=0x7ffff800 IEDBASE=0x80400000 |
| 429 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 430 | Relocation complete. |
| 431 | microcode: Update skipped, already up-to-date |
| 432 | New SMBASE 0x7ffff000 |
| 433 | In relocation handler: cpu 4 |
| 434 | New SMBASE=0x7ffff000 IEDBASE=0x80400000 |
| 435 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 436 | Relocation complete. |
| 437 | microcode: Update skipped, already up-to-date |
| 438 | New SMBASE 0x7fffec00 |
| 439 | In relocation handler: cpu 5 |
| 440 | New SMBASE=0x7fffec00 IEDBASE=0x80400000 |
| 441 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 442 | Relocation complete. |
| 443 | microcode: Update skipped, already up-to-date |
| 444 | New SMBASE 0x7fffe800 |
| 445 | In relocation handler: cpu 6 |
| 446 | New SMBASE=0x7fffe800 IEDBASE=0x80400000 |
| 447 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 448 | Relocation complete. |
| 449 | microcode: Update skipped, already up-to-date |
| 450 | New SMBASE 0x7fffe400 |
| 451 | In relocation handler: cpu 7 |
| 452 | New SMBASE=0x7fffe400 IEDBASE=0x80400000 |
| 453 | Writing SMRR. base = 0x80000006, mask=0xff800800 |
| 454 | Relocation complete. |
| 455 | microcode: Update skipped, already up-to-date |
| 456 | Initializing CPU #0 |
| 457 | CPU: vendor Intel device 306a9 |
| 458 | CPU: family 06, model 3a, stepping 09 |
| 459 | Enabling cache |
| 460 | CPU: Intel(R) Core(TM) i7-3940XM CPU @ 3.00GHz. |
| 461 | CPU: platform id 4 |
| 462 | CPU: cpuid(1) 0x306a9 |
| 463 | CPU: AES supported |
| 464 | CPU: TXT supported |
| 465 | CPU: VT supported |
| 466 | Setting up local APIC... |
| 467 | apic_id: 0x00 done. |
| 468 | VMX status: enabled |
| 469 | IA32_FEATURE_CONTROL status: locked |
| 470 | model_x06ax: energy policy set to 6 |
| 471 | model_x06ax: frequency set to 3000 |
| 472 | Turbo is available but hidden |
| 473 | Turbo is available and visible |
| 474 | CPU #0 initialized |
| 475 | Initializing CPU #1 |
| 476 | Initializing CPU #6 |
| 477 | Initializing CPU #7 |
| 478 | CPU: vendor Intel device 306a9 |
| 479 | CPU: vendor Intel device 306a9 |
| 480 | CPU: family 06, model 3a, stepping 09 |
| 481 | CPU: family 06, model 3a, stepping 09 |
| 482 | CPU: vendor Intel device 306a9 |
| 483 | CPU: family 06, model 3a, stepping 09 |
| 484 | Enabling cache |
| 485 | Enabling cache |
| 486 | Initializing CPU #3 |
| 487 | Initializing CPU #5 |
| 488 | CPU: vendor Intel device 306a9 |
| 489 | CPU: vendor Intel device 306a9 |
| 490 | CPU: family 06, model 3a, stepping 09 |
| 491 | CPU: family 06, model 3a, stepping 09 |
| 492 | Initializing CPU #4 |
| 493 | Initializing CPU #2 |
| 494 | CPU: vendor Intel device 306a9 |
| 495 | CPU: vendor Intel device 306a9 |
| 496 | CPU: family 06, model 3a, stepping 09 |
| 497 | CPU: family 06, model 3a, stepping 09 |
| 498 | Enabling cache |
| 499 | Enabling cache |
| 500 | Enabling cache |
| 501 | Enabling cache |
| 502 | Enabling cache |
| 503 | CPU: Intel(R) Core(TM) i7-3940XM CPU @ 3.00GHz. |
| 504 | CPU: Intel(R) Core(TM) i7-3940XM CPU @ 3.00GHz. |
| 505 | CPU: platform id 4 |
| 506 | CPU: platform id 4 |
| 507 | CPU: cpuid(1) 0x306a9 |
| 508 | CPU: cpuid(1) 0x306a9 |
| 509 | CPU: AES supported |
| 510 | CPU: TXT supported |
| 511 | CPU: VT supported |
| 512 | CPU: AES supported |
| 513 | CPU: TXT supported |
| 514 | CPU: VT supported |
| 515 | Setting up local APIC... |
| 516 | Setting up local APIC... |
| 517 | CPU: Intel(R) Core(TM) i7-3940XM CPU @ 3.00GHz. |
| 518 | apic_id: 0x07 done. |
| 519 | CPU: platform id 4 |
| 520 | CPU: Intel(R) Core(TM) i7-3940XM CPU @ 3.00GHz. |
| 521 | CPU: Intel(R) Core(TM) i7-3940XM CPU @ 3.00GHz. |
| 522 | CPU: platform id 4 |
| 523 | CPU: platform id 4 |
| 524 | CPU: cpuid(1) 0x306a9 |
| 525 | CPU: cpuid(1) 0x306a9 |
| 526 | CPU: AES supported |
| 527 | CPU: TXT supported |
| 528 | CPU: VT supported |
| 529 | CPU: AES supported |
| 530 | CPU: TXT supported |
| 531 | CPU: VT supported |
| 532 | Setting up local APIC... |
| 533 | Setting up local APIC... |
| 534 | CPU: Intel(R) Core(TM) i7-3940XM CPU @ 3.00GHz. |
| 535 | CPU: Intel(R) Core(TM) i7-3940XM CPU @ 3.00GHz. |
| 536 | CPU: platform id 4 |
| 537 | CPU: platform id 4 |
| 538 | CPU: cpuid(1) 0x306a9 |
| 539 | CPU: cpuid(1) 0x306a9 |
| 540 | CPU: AES supported |
| 541 | CPU: TXT supported |
| 542 | CPU: VT supported |
| 543 | CPU: AES supported |
| 544 | CPU: TXT supported |
| 545 | CPU: VT supported |
| 546 | Setting up local APIC... |
| 547 | Setting up local APIC... |
| 548 | CPU: cpuid(1) 0x306a9 |
| 549 | apic_id: 0x04 done. |
| 550 | apic_id: 0x05 done. |
| 551 | VMX status: enabled |
| 552 | VMX status: enabled |
| 553 | IA32_FEATURE_CONTROL status: locked |
| 554 | CPU: AES supported |
| 555 | CPU: TXT supported |
| 556 | CPU: VT supported |
| 557 | VMX status: enabled |
| 558 | apic_id: 0x06 done. |
| 559 | IA32_FEATURE_CONTROL status: locked |
| 560 | VMX status: enabled |
| 561 | IA32_FEATURE_CONTROL status: locked |
| 562 | apic_id: 0x03 done. |
| 563 | apic_id: 0x02 done. |
| 564 | VMX status: enabled |
| 565 | VMX status: enabled |
| 566 | IA32_FEATURE_CONTROL status: locked |
| 567 | IA32_FEATURE_CONTROL status: locked |
| 568 | IA32_FEATURE_CONTROL status: locked |
| 569 | model_x06ax: energy policy set to 6 |
| 570 | model_x06ax: energy policy set to 6 |
| 571 | Setting up local APIC... |
| 572 | model_x06ax: energy policy set to 6 |
| 573 | model_x06ax: frequency set to 3000 |
| 574 | CPU #4 initialized |
| 575 | model_x06ax: frequency set to 3000 |
| 576 | CPU #2 initialized |
| 577 | model_x06ax: frequency set to 3000 |
| 578 | CPU #7 initialized |
| 579 | model_x06ax: energy policy set to 6 |
| 580 | apic_id: 0x01 done. |
| 581 | model_x06ax: energy policy set to 6 |
| 582 | model_x06ax: frequency set to 3000 |
| 583 | CPU #3 initialized |
| 584 | model_x06ax: frequency set to 3000 |
| 585 | CPU #5 initialized |
| 586 | VMX status: enabled |
| 587 | model_x06ax: energy policy set to 6 |
| 588 | IA32_FEATURE_CONTROL status: locked |
| 589 | model_x06ax: frequency set to 3000 |
| 590 | CPU #6 initialized |
| 591 | model_x06ax: energy policy set to 6 |
| 592 | model_x06ax: frequency set to 3000 |
| 593 | CPU #1 initialized |
| 594 | bsp_do_flight_plan done after 26 msecs. |
| 595 | Initializing southbridge SMI... |
| 596 | SMI_STS: |
| 597 | GPE0_STS: GPIO15 GPIO14 GPIO11 GPIO9 GPIO7 GPIO5 GPIO4 GPIO3 GPIO0 |
| 598 | ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI5 GPI4 GPI3 GPI1 GPI0 |
| 599 | TCO_STS: |
| 600 | Locking SMM. |
| 601 | CPU_CLUSTER: 0 init finished in 41 msecs |
| 602 | PCI: 00:00.0 init |
| 603 | Disabling PEG12. |
| 604 | Disabling PEG11. |
| 605 | Disabling PEG10. |
| 606 | Disabling PEG60. |
| 607 | Disabling Device 7. |
| 608 | Disabling PEG IO clock. |
| 609 | Set BIOS_RESET_CPL |
| 610 | CPU TDP: 55 Watts |
| 611 | PCI: 00:00.0 init finished in 1 msecs |
| 612 | PCI: 00:02.0 init |
| 613 | GT Power Management Init |
| 614 | IVB GT2 35W Power Meter Weights |
| 615 | GT Power Management Init (post VBIOS) |
| 616 | |
| 617 | [0.626901] CONFIG => |
| 618 | [0.626901] (Primary => |
| 619 | [0.626902] (Port => LVDS , |
| 620 | [0.626902] Framebuffer => |
| 621 | [0.626902] (Width => 640, |
| 622 | [0.626903] Height => 400, |
| 623 | [0.626903] Start_X => 0, |
| 624 | [0.626904] Start_Y => 0, |
| 625 | [0.626904] Stride => 1, |
| 626 | [0.626905] V_Stride => 1, |
| 627 | [0.626905] Tiling => Linear , |
| 628 | [0.626906] Rotation => No_Rotation, |
| 629 | [0.626906] Offset => 0xffffffff, |
| 630 | [0.626907] BPC => 8), |
| 631 | [0.626907] Mode => |
| 632 | [0.626908] (Dotclock => 139000000, |
| 633 | [0.626908] H_Visible => 1920, |
| 634 | [0.626909] H_Sync_Begin => 1980, |
| 635 | [0.626909] H_Sync_End => 2028, |
| 636 | [0.626910] H_Total => 2050, |
| 637 | [0.626910] V_Visible => 1080, |
| 638 | [0.626911] V_Sync_Begin => 1090, |
| 639 | [0.626911] V_Sync_End => 1100, |
| 640 | [0.626912] V_Total => 1130, |
| 641 | [0.626912] H_Sync_Active_High => False, |
| 642 | [0.626913] V_Sync_Active_High => False, |
| 643 | [0.626913] BPC => 5)), |
| 644 | [0.626914] Secondary => |
| 645 | [0.626914] (Port => Disabled, |
| 646 | [0.626914] Framebuffer => |
| 647 | [0.626915] (Width => 1, |
| 648 | [0.626915] Height => 1, |
| 649 | [0.626916] Start_X => 0, |
| 650 | [0.626916] Start_Y => 0, |
| 651 | [0.626916] Stride => 1, |
| 652 | [0.626917] V_Stride => 1, |
| 653 | [0.626917] Tiling => Linear , |
| 654 | [0.626918] Rotation => No_Rotation, |
| 655 | [0.626918] Offset => 0x00000000, |
| 656 | [0.626919] BPC => 8), |
| 657 | [0.626919] Mode => |
| 658 | [0.626919] (Dotclock => 1000000, |
| 659 | [0.626920] H_Visible => 1, |
| 660 | [0.626920] H_Sync_Begin => 1, |
| 661 | [0.626921] H_Sync_End => 1, |
| 662 | [0.626921] H_Total => 1, |
| 663 | [0.626922] V_Visible => 1, |
| 664 | [0.626922] V_Sync_Begin => 1, |
| 665 | [0.626923] V_Sync_End => 1, |
| 666 | [0.626923] V_Total => 1, |
| 667 | [0.626924] H_Sync_Active_High => False, |
| 668 | [0.626924] V_Sync_Active_High => False, |
| 669 | [0.626925] BPC => 5)), |
| 670 | [0.626925] Tertiary => |
| 671 | [0.626926] (Port => Disabled, |
| 672 | [0.626926] Framebuffer => |
| 673 | [0.626926] (Width => 1, |
| 674 | [0.626927] Height => 1, |
| 675 | [0.626927] Start_X => 0, |
| 676 | [0.626928] Start_Y => 0, |
| 677 | [0.626928] Stride => 1, |
| 678 | [0.626928] V_Stride => 1, |
| 679 | [0.626929] Tiling => Linear , |
| 680 | [0.626929] Rotation => No_Rotation, |
| 681 | [0.626930] Offset => 0x00000000, |
| 682 | [0.626930] BPC => 8), |
| 683 | [0.626931] Mode => |
| 684 | [0.626931] (Dotclock => 1000000, |
| 685 | [0.626932] H_Visible => 1, |
| 686 | [0.626932] H_Sync_Begin => 1, |
| 687 | [0.626933] H_Sync_End => 1, |
| 688 | [0.626933] H_Total => 1, |
| 689 | [0.626934] V_Visible => 1, |
| 690 | [0.626934] V_Sync_Begin => 1, |
| 691 | [0.626935] V_Sync_End => 1, |
| 692 | [0.626935] V_Total => 1, |
| 693 | [0.626936] H_Sync_Active_High => False, |
| 694 | [0.626936] V_Sync_Active_High => False, |
| 695 | [0.626937] BPC => 5))); |
| 696 | PCI: 00:02.0 init finished in 512 msecs |
| 697 | PCI: 00:04.0 init |
| 698 | PCI: 00:04.0 init finished in 0 msecs |
| 699 | PCI: 00:14.0 init |
| 700 | XHCI: Setting up controller.. done. |
| 701 | PCI: 00:14.0 init finished in 0 msecs |
| 702 | PCI: 00:16.0 init |
| 703 | ME: FW Partition Table : OK |
| 704 | ME: Bringup Loader Failure : NO |
| 705 | ME: Firmware Init Complete : NO |
| 706 | ME: Manufacturing Mode : YES |
| 707 | ME: Boot Options Present : NO |
| 708 | ME: Update In Progress : NO |
| 709 | ME: Current Working State : Initializing |
| 710 | ME: Current Operation State : Bring up |
| 711 | ME: Current Operation Mode : Debug or Disabled by AltDisableBit |
| 712 | ME: Error Code : No Error |
| 713 | ME: Progress Phase : BUP Phase |
| 714 | ME: Power Management Event : Pseudo-global reset |
| 715 | ME: Progress Phase State : Check to see if straps say ME DISABLED |
| 716 | intel_me_path: mbp is not ready! |
| 717 | ME: BIOS path: Error |
| 718 | PCI: 00:16.0 init finished in 0 msecs |
| 719 | PCI: 00:19.0 init |
| 720 | PCI: 00:19.0 init finished in 0 msecs |
| 721 | PCI: 00:1a.0 init |
| 722 | EHCI: Setting up controller.. done. |
| 723 | PCI: 00:1a.0 init finished in 0 msecs |
| 724 | PCI: 00:1b.0 init |
| 725 | Azalia: base = e1638000 |
| 726 | Azalia: codec_mask = 09 |
| 727 | Azalia: Initializing codec #3 |
| 728 | Azalia: codec viddid: 80862806 |
| 729 | Azalia: verb_size: 16 |
| 730 | Azalia: verb loaded. |
| 731 | Azalia: Initializing codec #0 |
| 732 | Azalia: codec viddid: 10ec0269 |
| 733 | Azalia: verb_size: 72 |
| 734 | Azalia: verb loaded. |
| 735 | PCI: 00:1b.0 init finished in 5 msecs |
| 736 | PCI: 00:1c.0 init |
| 737 | Initializing PCH PCIe bridge. |
| 738 | PCI: 00:1c.0 init finished in 0 msecs |
| 739 | PCI: 00:1c.1 init |
| 740 | Initializing PCH PCIe bridge. |
| 741 | PCI: 00:1c.1 init finished in 0 msecs |
| 742 | PCI: 00:1c.2 init |
| 743 | Initializing PCH PCIe bridge. |
| 744 | PCI: 00:1c.2 init finished in 0 msecs |
| 745 | PCI: 00:1d.0 init |
| 746 | EHCI: Setting up controller.. done. |
| 747 | PCI: 00:1d.0 init finished in 0 msecs |
| 748 | PCI: 00:1f.0 init |
| 749 | pch: lpc_init |
| 750 | PCH: detected QM77, device id: 0x1e55, rev id 0x4 |
| 751 | IOAPIC: Initializing IOAPIC at 0xfec00000 |
| 752 | IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| 753 | IOAPIC: ID = 0x02 |
| 754 | Set power off after power failure. |
| 755 | NMI sources enabled. |
| 756 | PantherPoint PM init |
| 757 | RTC: failed = 0x0 |
| 758 | RTC Init |
| 759 | Disabling ACPI via APMC: |
| 760 | done. |
| 761 | pch_spi_init |
| 762 | PCI: 00:1f.0 init finished in 0 msecs |
| 763 | PCI: 00:1f.2 init |
| 764 | SATA: Initializing... |
| 765 | SATA: Controller in AHCI mode. |
| 766 | ABAR: 0xe163d000 |
| 767 | PCI: 00:1f.2 init finished in 0 msecs |
| 768 | PCI: 00:1f.3 init |
| 769 | PCI: 00:1f.3 init finished in 0 msecs |
| 770 | PCI: 01:00.0 init |
| 771 | PCI: 01:00.0 init finished in 0 msecs |
| 772 | PCI: 01:00.3 init |
| 773 | PCI: 01:00.3 init finished in 0 msecs |
| 774 | PCI: 02:00.0 init |
| 775 | PCI: 02:00.0 init finished in 0 msecs |
| 776 | PNP: 00ff.2 init |
| 777 | PNP: 00ff.2 init finished in 0 msecs |
| 778 | smbus: PCI: 00:1f.3[0]->I2C: 01:54 init |
| 779 | I2C: 01:54 init finished in 0 msecs |
| 780 | smbus: PCI: 00:1f.3[0]->I2C: 01:55 init |
| 781 | I2C: 01:55 init finished in 0 msecs |
| 782 | smbus: PCI: 00:1f.3[0]->I2C: 01:56 init |
| 783 | I2C: 01:56 init finished in 0 msecs |
| 784 | smbus: PCI: 00:1f.3[0]->I2C: 01:57 init |
| 785 | I2C: 01:57 init finished in 0 msecs |
| 786 | smbus: PCI: 00:1f.3[0]->I2C: 01:5c init |
| 787 | Locking EEPROM RFID |
| 788 | init EEPROM done |
| 789 | I2C: 01:5c init finished in 26 msecs |
| 790 | smbus: PCI: 00:1f.3[0]->I2C: 01:5d init |
| 791 | I2C: 01:5d init finished in 0 msecs |
| 792 | smbus: PCI: 00:1f.3[0]->I2C: 01:5e init |
| 793 | I2C: 01:5e init finished in 0 msecs |
| 794 | smbus: PCI: 00:1f.3[0]->I2C: 01:5f init |
| 795 | I2C: 01:5f init finished in 0 msecs |
| 796 | Devices initialized |
| 797 | BS: BS_DEV_INIT run times (exec / console): 588 / 0 ms |
| 798 | Finalize devices... |
| 799 | PCI: 00:1f.0 final |
| 800 | flash size 0xc00000 bytes |
| 801 | SF: Detected 00 0000 with sector size 0x1000, total 0xc00000 |
| 802 | SF size 0xc00000 does not correspond to CONFIG_ROM_SIZE 0x800000!! |
| 803 | Devices finalized |
| 804 | FMAP: area COREBOOT found @ 610200 (2031104 bytes) |
| 805 | CBFS: Locating 'fallback/dsdt.aml' |
| 806 | CBFS: Found @ offset 360c0 size 3973 |
| 807 | FMAP: area COREBOOT found @ 610200 (2031104 bytes) |
| 808 | CBFS: Locating 'fallback/slic' |
| 809 | CBFS: 'fallback/slic' not found. |
| 810 | ACPI: Writing ACPI tables at 7ff46000. |
| 811 | ACPI: * FACS |
| 812 | ACPI: * DSDT |
| 813 | ACPI: * FADT |
| 814 | ACPI: added table 1/32, length now 40 |
| 815 | ACPI: * SSDT |
| 816 | Found 1 CPU(s) with 8 core(s) each. |
| 817 | PSS: 3001MHz power 55000 control 0x2700 status 0x2700 |
| 818 | PSS: 3000MHz power 55000 control 0x1e00 status 0x1e00 |
| 819 | PSS: 2400MHz power 41008 control 0x1800 status 0x1800 |
| 820 | PSS: 2000MHz power 32564 control 0x1400 status 0x1400 |
| 821 | PSS: 1600MHz power 24829 control 0x1000 status 0x1000 |
| 822 | PSS: 1200MHz power 17710 control 0xc00 status 0xc00 |
| 823 | PSS: 3001MHz power 55000 control 0x2700 status 0x2700 |
| 824 | PSS: 3000MHz power 55000 control 0x1e00 status 0x1e00 |
| 825 | PSS: 2400MHz power 41008 control 0x1800 status 0x1800 |
| 826 | PSS: 2000MHz power 32564 control 0x1400 status 0x1400 |
| 827 | PSS: 1600MHz power 24829 control 0x1000 status 0x1000 |
| 828 | PSS: 1200MHz power 17710 control 0xc00 status 0xc00 |
| 829 | PSS: 3001MHz power 55000 control 0x2700 status 0x2700 |
| 830 | PSS: 3000MHz power 55000 control 0x1e00 status 0x1e00 |
| 831 | PSS: 2400MHz power 41008 control 0x1800 status 0x1800 |
| 832 | PSS: 2000MHz power 32564 control 0x1400 status 0x1400 |
| 833 | PSS: 1600MHz power 24829 control 0x1000 status 0x1000 |
| 834 | PSS: 1200MHz power 17710 control 0xc00 status 0xc00 |
| 835 | PSS: 3001MHz power 55000 control 0x2700 status 0x2700 |
| 836 | PSS: 3000MHz power 55000 control 0x1e00 status 0x1e00 |
| 837 | PSS: 2400MHz power 41008 control 0x1800 status 0x1800 |
| 838 | PSS: 2000MHz power 32564 control 0x1400 status 0x1400 |
| 839 | PSS: 1600MHz power 24829 control 0x1000 status 0x1000 |
| 840 | PSS: 1200MHz power 17710 control 0xc00 status 0xc00 |
| 841 | PSS: 3001MHz power 55000 control 0x2700 status 0x2700 |
| 842 | PSS: 3000MHz power 55000 control 0x1e00 status 0x1e00 |
| 843 | PSS: 2400MHz power 41008 control 0x1800 status 0x1800 |
| 844 | PSS: 2000MHz power 32564 control 0x1400 status 0x1400 |
| 845 | PSS: 1600MHz power 24829 control 0x1000 status 0x1000 |
| 846 | PSS: 1200MHz power 17710 control 0xc00 status 0xc00 |
| 847 | PSS: 3001MHz power 55000 control 0x2700 status 0x2700 |
| 848 | PSS: 3000MHz power 55000 control 0x1e00 status 0x1e00 |
| 849 | PSS: 2400MHz power 41008 control 0x1800 status 0x1800 |
| 850 | PSS: 2000MHz power 32564 control 0x1400 status 0x1400 |
| 851 | PSS: 1600MHz power 24829 control 0x1000 status 0x1000 |
| 852 | PSS: 1200MHz power 17710 control 0xc00 status 0xc00 |
| 853 | PSS: 3001MHz power 55000 control 0x2700 status 0x2700 |
| 854 | PSS: 3000MHz power 55000 control 0x1e00 status 0x1e00 |
| 855 | PSS: 2400MHz power 41008 control 0x1800 status 0x1800 |
| 856 | PSS: 2000MHz power 32564 control 0x1400 status 0x1400 |
| 857 | PSS: 1600MHz power 24829 control 0x1000 status 0x1000 |
| 858 | PSS: 1200MHz power 17710 control 0xc00 status 0xc00 |
| 859 | PSS: 3001MHz power 55000 control 0x2700 status 0x2700 |
| 860 | PSS: 3000MHz power 55000 control 0x1e00 status 0x1e00 |
| 861 | PSS: 2400MHz power 41008 control 0x1800 status 0x1800 |
| 862 | PSS: 2000MHz power 32564 control 0x1400 status 0x1400 |
| 863 | PSS: 1600MHz power 24829 control 0x1000 status 0x1000 |
| 864 | PSS: 1200MHz power 17710 control 0xc00 status 0xc00 |
| 865 | Generating ACPI PIRQ entries |
| 866 | \_SB.PCI0.LPCB.TPM.TPM: LPC TPM PNP: 0c31.0 |
| 867 | ACPI: * H8 |
| 868 | H8: BDC installed |
| 869 | H8: WWAN detection not implemented. Assuming WWAN installed |
| 870 | \_SB.PCI0.RP02.WF00.WF00: PCI: 02:00.0 |
| 871 | ACPI: added table 2/32, length now 44 |
| 872 | ACPI: * MCFG |
| 873 | ACPI: added table 3/32, length now 48 |
| 874 | ACPI: * TCPA |
| 875 | TCPA log created at 0x7ff35000 |
| 876 | ACPI: added table 4/32, length now 52 |
| 877 | ACPI: * MADT |
| 878 | ACPI: added table 5/32, length now 56 |
| 879 | current = 7ff4cbf0 |
| 880 | ACPI: * DMAR |
| 881 | ACPI: added table 6/32, length now 60 |
| 882 | current = 7ff4ccc0 |
| 883 | FMAP: area COREBOOT found @ 610200 (2031104 bytes) |
| 884 | CBFS: Locating 'vbt.bin' |
| 885 | CBFS: Found @ offset 39bc0 size 58a |
| 886 | Found a VBT of 4459 bytes after decompression |
| 887 | GMA: Found VBT in CBFS |
| 888 | GMA: Found valid VBT in CBFS |
| 889 | ACPI: * HPET |
| 890 | ACPI: added table 7/32, length now 64 |
| 891 | ACPI: done. |
| 892 | ACPI tables: 36096 bytes. |
| 893 | smbios_write_tables: 7ff34000 |
| 894 | Create SMBIOS type 17 |
| 895 | PCI: 02:00.0 (unknown) |
| 896 | SMBIOS tables: 1105 bytes. |
| 897 | Writing table forward entry at 0x00000500 |
| 898 | Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum dfe7 |
| 899 | Writing coreboot table at 0x7ff6a000 |
| 900 | FMAP: area COREBOOT found @ 610200 (2031104 bytes) |
| 901 | CBFS: Locating 'cmos_layout.bin' |
| 902 | CBFS: Found @ offset 3a1c0 size 7bc |
| 903 | 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 904 | 1. 0000000000001000-000000000009ffff: RAM |
| 905 | 2. 00000000000a0000-00000000000fffff: RESERVED |
| 906 | 3. 0000000000100000-000000007ff33fff: RAM |
| 907 | 4. 000000007ff34000-000000007ff82fff: CONFIGURATION TABLES |
| 908 | 5. 000000007ff83000-000000007ffd1fff: RAMSTAGE |
| 909 | 6. 000000007ffd2000-000000007fffffff: CONFIGURATION TABLES |
| 910 | 7. 0000000080000000-00000000829fffff: RESERVED |
| 911 | 8. 00000000f0000000-00000000f3ffffff: RESERVED |
| 912 | 9. 00000000fed40000-00000000fed44fff: RESERVED |
| 913 | 10. 00000000fed90000-00000000fed91fff: RESERVED |
| 914 | 11. 0000000100000000-000000087d5fffff: RAM |
| 915 | FMAP: area COREBOOT found @ 610200 (2031104 bytes) |
| 916 | Wrote coreboot table at: 0x7ff6a000, 0xb20 bytes, checksum e7ab |
| 917 | coreboot table: 2872 bytes. |
| 918 | IMD ROOT 0. 0x7ffff000 0x00001000 |
| 919 | IMD SMALL 1. 0x7fffe000 0x00001000 |
| 920 | CONSOLE 2. 0x7ffde000 0x00020000 |
| 921 | TIME STAMP 3. 0x7ffdd000 0x00000910 |
| 922 | ROMSTG STCK 4. 0x7ffdc000 0x00001000 |
| 923 | AFTER CAR 5. 0x7ffd2000 0x0000a000 |
| 924 | RAMSTAGE 6. 0x7ff82000 0x00050000 |
| 925 | SMM BACKUP 7. 0x7ff72000 0x00010000 |
| 926 | COREBOOT 8. 0x7ff6a000 0x00008000 |
| 927 | ACPI 9. 0x7ff46000 0x00024000 |
| 928 | ACPI GNVS 10. 0x7ff45000 0x00001000 |
| 929 | TCPA TCGLOG11. 0x7ff35000 0x00010000 |
| 930 | SMBIOS 12. 0x7ff34000 0x00000800 |
| 931 | IMD small region: |
| 932 | IMD ROOT 0. 0x7fffec00 0x00000400 |
| 933 | FMAP 1. 0x7fffeb20 0x000000e0 |
| 934 | MEM INFO 2. 0x7fffe960 0x000001b9 |
| 935 | ROMSTAGE 3. 0x7fffe940 0x00000004 |
| 936 | BS: BS_WRITE_TABLES run times (exec / console): 26 / 0 ms |
| 937 | FMAP: area COREBOOT found @ 610200 (2031104 bytes) |
| 938 | CBFS: Locating 'fallback/payload' |
| 939 | CBFS: Found @ offset 3f480 size 6399c |
| 940 | Checking segment from ROM address 0xffe4f6b8 |
| 941 | Checking segment from ROM address 0xffe4f6d4 |
| 942 | Checking segment from ROM address 0xffe4f6f0 |
| 943 | Loading segment from ROM address 0xffe4f6b8 |
| 944 | code (compression=1) |
| 945 | New segment dstaddr 0x00008200 memsize 0x1b988 srcaddr 0xffe4f70c filesize 0x99fd |
| 946 | Loading Segment: addr: 0x00008200 memsz: 0x000000000001b988 filesz: 0x00000000000099fd |
| 947 | using LZMA |
| 948 | Clearing Segment: addr: 0x000000000001c143 memsz: 0x0000000000007a45 |
| 949 | Loading segment from ROM address 0xffe4f6d4 |
| 950 | code (compression=1) |
| 951 | New segment dstaddr 0x00100000 memsize 0x125694 srcaddr 0xffe59109 filesize 0x59f4b |
| 952 | Loading Segment: addr: 0x00100000 memsz: 0x0000000000125694 filesz: 0x0000000000059f4b |
| 953 | using LZMA |
| 954 | Loading segment from ROM address 0xffe4f6f0 |
| 955 | Entry Point 0x00008200 |
| 956 | BS: BS_PAYLOAD_LOAD run times (exec / console): 120 / 0 ms |
| 957 | ICH-NM10-PCH: watchdog disabled |
| 958 | Jumping to boot code at 0x00008200(0x7ff6a000) |
| 959 | error: no suitable video mode found. |
| 960 |
error: file `/boot/grub/i386-coreboot/jpeg.mod' not found. |
| 961 |
error: file `/boot/grub/i386-coreboot/gfxterm_background.mod' not found. |
| 962 |
error: file `/dejavusansmono.pf2' not found. |
| 963 |
error: file `/boot/grub/layouts/usqwerty.gkb' not found. |
| 964 |
GNU GRUB version 2.02 |
| 965 |
|
| 966 |
+----------------------------------------------------------------------------+||||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. |
| 967 |
Press enter to boot the selected OS, `e' to edit the commands |
| 968 |
before booting or `c' for a command-line. *Load Operating System (incl. fully encrypted disks) [o] ? Search ISOLINUX menu (AHCI) [a] ? Search ISOLINUX menu (USB) [u] ? Search ISOLINUX menu (CD/DVD) [d] ? Load test configuration (grubtest.cfg) inside of CBFS [t] ? Search for GRUB2 configuration on external media [s] ? Poweroff [p] ? Reboot [r] ? ? ? ? ? The highlighted entry will be executed automatically in 1s. error: file `/boot/grub/fonts/unicode.pf2' not found. |
| 969 |
error: no suitable video mode found. |
| 970 |
GNU GRUB version 2.02 |
| 971 |
|
| 972 |
+----------------------------------------------------------------------------+||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. |
| 973 |
Press enter to boot the selected OS, `e' to edit the commands |
| 974 |
before booting or `c' for a command-line. ESC to return |
| 975 |
previous menu. *Gentoo GNU/Linux ? Advanced options for Gentoo GNU/Linux ? Memtest86 ? Memtest86+ ? ? ? ? ? ? ? ? The highlighted entry will be executed automatically in 5s. error: file `/boot/grub/i386-coreboot/all_video.mod' not found. |
| 976 |
Loading Linux 5.3.6-gentoo-r1 ... |
| 977 |
Loading initial ramdisk ... |
| 978 |
|
| 979 |
Press any key to continue... |
| 980 |
|