Gitiles
Code Review Sign In
review.coreboot.org / board-status / HEAD / . / lenovo / t420 / 4.9-1860-g2761847 / 2019-06-02T04_11_29Z / kernel_log.txt
blob: 0d561ba54fa1b10308a6d37cc99067d21b822bed [file] [log] [blame]
Evgeny Zinoviev095c9b02019-06-02 22:17:33 +0300[diff] [blame]1[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
2[ 0.000000] Linux version 4.13.0-41-generic (buildd@lgw01-amd64-028) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #46~16.04.1-Ubuntu SMP Thu May 3 10:06:43 UTC 2018 (Ubuntu 4.13.0-41.46~16.04.1-generic 4.13.16)
3[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-41-generic root=UUID=ac918c6d-7af1-4639-8c49-27af7eaa3f01 ro quiet splash vt.handoff=7
4[ 0.000000] KERNEL supported cpus:
5[ 0.000000] Intel GenuineIntel
6[ 0.000000] AMD AuthenticAMD
7[ 0.000000] Centaur CentaurHauls
8[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
9[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
10[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
11[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
12[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
13[ 0.000000] e820: BIOS-provided physical RAM map:
14[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
15[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007af2bfff] usable
18[ 0.000000] BIOS-e820: [mem 0x000000007af2c000-0x000000007d9fffff] reserved
19[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
20[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
21[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
22[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
23[ 0.000000] NX (Execute Disable) protection: active
24[ 0.000000] random: fast init done
25[ 0.000000] SMBIOS 2.7 present.
26[ 0.000000] DMI: LENOVO 4236W9B/4236W9B, BIOS CBET4000 4.9-1860-g2761847-dirty 06/02/2019
27[ 0.000000] tsc: Fast TSC calibration using PIT
28[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
29[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
30[ 0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
31[ 0.000000] MTRR default type: uncachable
32[ 0.000000] MTRR fixed ranges enabled:
33[ 0.000000] 00000-9FFFF write-back
34[ 0.000000] A0000-BFFFF uncachable
35[ 0.000000] C0000-FFFFF write-back
36[ 0.000000] MTRR variable ranges enabled:
37[ 0.000000] 0 base 000000000 mask F80000000 write-back
38[ 0.000000] 1 base 07B000000 mask FFF000000 uncachable
39[ 0.000000] 2 base 07C000000 mask FFC000000 uncachable
40[ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining
41[ 0.000000] 4 base 100000000 mask FFF800000 write-back
42[ 0.000000] 5 disabled
43[ 0.000000] 6 disabled
44[ 0.000000] 7 disabled
45[ 0.000000] 8 disabled
46[ 0.000000] 9 disabled
47[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
48[ 0.000000] e820: last_pfn = 0x7af2c max_arch_pfn = 0x400000000
49[ 0.000000] Scanning 1 areas for low memory corruption
50[ 0.000000] Base memory trampoline at [ffff9fd280099000] 99000 size 24576
51[ 0.000000] BRK [0x7832c000, 0x7832cfff] PGTABLE
52[ 0.000000] BRK [0x7832d000, 0x7832dfff] PGTABLE
53[ 0.000000] BRK [0x7832e000, 0x7832efff] PGTABLE
54[ 0.000000] BRK [0x7832f000, 0x7832ffff] PGTABLE
55[ 0.000000] BRK [0x78330000, 0x78330fff] PGTABLE
56[ 0.000000] RAMDISK: [mem 0x32124000-0x35089fff]
57[ 0.000000] ACPI: Early table checksum verification disabled
58[ 0.000000] ACPI: RSDP 0x00000000000F65F0 000024 (v02 COREv4)
59[ 0.000000] ACPI: XSDT 0x000000007AF400E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20161222)
60[ 0.000000] ACPI: FACP 0x000000007AF43B20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20161222)
61[ 0.000000] ACPI: DSDT 0x000000007AF40280 00389F (v02 COREv4 COREBOOT 20110725 INTL 20161222)
62[ 0.000000] ACPI: FACS 0x000000007AF40240 000040
63[ 0.000000] ACPI: FACS 0x000000007AF40240 000040
64[ 0.000000] ACPI: SSDT 0x000000007AF43C20 001BE9 (v02 COREv4 COREBOOT 0000002A CORE 20161222)
65[ 0.000000] ACPI: MCFG 0x000000007AF45810 00003C (v01 COREv4 COREBOOT 00000000 CORE 20161222)
66[ 0.000000] ACPI: TCPA 0x000000007AF45850 000032 (v02 COREv4 COREBOOT 00000000 CORE 20161222)
67[ 0.000000] ACPI: APIC 0x000000007AF45890 00006C (v02 COREv4 COREBOOT 00000000 CORE 20161222)
68[ 0.000000] ACPI: DMAR 0x000000007AF45900 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20161222)
69[ 0.000000] ACPI: HPET 0x000000007AF479D0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20161222)
70[ 0.000000] ACPI: Local APIC address 0xfee00000
71[ 0.000000] No NUMA configuration found
72[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
73[ 0.000000] NODE_DATA(0) allocated [mem 0x1005d3000-0x1005fdfff]
74[ 0.000000] Zone ranges:
75[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
76[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
77[ 0.000000] Normal [mem 0x0000000100000000-0x00000001005fffff]
78[ 0.000000] Device empty
79[ 0.000000] Movable zone start for each node
80[ 0.000000] Early memory node ranges
81[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
82[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007af2bfff]
83[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001005fffff]
84[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001005fffff]
85[ 0.000000] On node 0 totalpages: 505034
86[ 0.000000] DMA zone: 64 pages used for memmap
87[ 0.000000] DMA zone: 21 pages reserved
88[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
89[ 0.000000] DMA32 zone: 7805 pages used for memmap
90[ 0.000000] DMA32 zone: 499500 pages, LIFO batch:31
91[ 0.000000] Normal zone: 24 pages used for memmap
92[ 0.000000] Normal zone: 1536 pages, LIFO batch:0
93[ 0.000000] Reserving Intel graphics memory at 0x000000007ba00000-0x000000007d9fffff
94[ 0.000000] ACPI: PM-Timer IO Port: 0x508
95[ 0.000000] ACPI: Local APIC address 0xfee00000
96[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
97[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
98[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
99[ 0.000000] ACPI: IRQ0 used by override.
100[ 0.000000] ACPI: IRQ9 used by override.
101[ 0.000000] Using ACPI (MADT) for SMP configuration information
102[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
103[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
104[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
105[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
106[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
107[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
108[ 0.000000] PM: Registered nosave memory: [mem 0x7af2c000-0x7d9fffff]
109[ 0.000000] PM: Registered nosave memory: [mem 0x7da00000-0xefffffff]
110[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
111[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
112[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
113[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
114[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
115[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
116[ 0.000000] e820: [mem 0x7da00000-0xefffffff] available for PCI devices
117[ 0.000000] Booting paravirtualized kernel on bare hardware
118[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
119[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
120[ 0.000000] percpu: Embedded 45 pages/cpu @ffff9fd380200000 s146584 r8192 d29544 u524288
121[ 0.000000] pcpu-alloc: s146584 r8192 d29544 u524288 alloc=1*2097152
122[ 0.000000] pcpu-alloc: [0] 0 1 2 3
123[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 497120
124[ 0.000000] Policy zone: Normal
125[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-41-generic root=UUID=ac918c6d-7af1-4639-8c49-27af7eaa3f01 ro quiet splash vt.handoff=7
126[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
127[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
128[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
129[ 0.000000] Memory: 1843920K/2020136K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2368K init, 2372K bss, 176216K reserved, 0K cma-reserved)
130[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
131[ 0.000000] Kernel/User page tables isolation: enabled
132[ 0.000000] ftrace: allocating 37858 entries in 148 pages
133[ 0.000000] Hierarchical RCU implementation.
134[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
135[ 0.000000] Tasks RCU enabled.
136[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
137[ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
138[ 0.000000] vt handoff: transparent VT on vt#7
139[ 0.000000] Console: colour VGA+ 80x25
140[ 0.000000] console [tty0] enabled
141[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
142[ 0.000000] hpet clockevent registered
143[ 0.000000] tsc: Fast TSC calibration using PIT
144[ 0.004000] tsc: Detected 2594.029 MHz processor
145[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.05 BogoMIPS (lpj=10376116)
146[ 0.004000] pid_max: default: 32768 minimum: 301
147[ 0.004000] ACPI: Core revision 20170531
148[ 0.009432] ACPI: 2 ACPI AML tables successfully acquired and loaded
149[ 0.009454] Security Framework initialized
150[ 0.009455] Yama: becoming mindful.
151[ 0.009472] AppArmor: AppArmor initialized
152[ 0.010079] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
153[ 0.010374] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
154[ 0.010392] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
155[ 0.010402] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
156[ 0.010603] CPU: Physical Processor ID: 0
157[ 0.010603] CPU: Processor Core ID: 0
158[ 0.010609] FEATURE SPEC_CTRL Present
159[ 0.010612] mce: CPU supports 7 MCE banks
160[ 0.010620] CPU0: Thermal monitoring enabled (TM1)
161[ 0.010627] process: using mwait in idle threads
162[ 0.010630] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
163[ 0.010630] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
164[ 0.010632] Spectre V2 mitigation: Mitigation: Full generic retpoline
165[ 0.010633] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
166[ 0.010633] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled
167[ 0.010747] Freeing SMP alternatives memory: 36K
168[ 0.011846] smpboot: Max logical packages: 2
169[ 0.011852] DMAR: Host address width 36
170[ 0.011853] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
171[ 0.011860] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
172[ 0.011861] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007d9fffff
173[ 0.011862] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
174[ 0.011865] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
175[ 0.011868] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
176[ 0.011869] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
177[ 0.011870] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
178[ 0.012381] DMAR-IR: Enabled IRQ remapping in x2apic mode
179[ 0.012382] x2apic enabled
180[ 0.012388] Switched APIC routing to cluster x2apic.
181[ 0.012837] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
182[ 0.052535] TSC deadline timer enabled
183[ 0.052538] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
184[ 0.052606] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
185[ 0.052628] ... version: 3
186[ 0.052628] ... bit width: 48
187[ 0.052629] ... generic registers: 4
188[ 0.052629] ... value mask: 0000ffffffffffff
189[ 0.052630] ... max period: 00007fffffffffff
190[ 0.052630] ... fixed-purpose events: 3
191[ 0.052631] ... event mask: 000000070000000f
192[ 0.052671] Hierarchical SRCU implementation.
193[ 0.053458] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
194[ 0.053475] smp: Bringing up secondary CPUs ...
195[ 0.053556] x86: Booting SMP configuration:
196[ 0.053557] .... node #0, CPUs: #1 #2 #3
197[ 0.058376] smp: Brought up 1 node, 4 CPUs
198[ 0.058376] smpboot: Total of 4 processors activated (20752.23 BogoMIPS)
199[ 0.060193] devtmpfs: initialized
200[ 0.060193] x86/mm: Memory block size: 128MB
201[ 0.060266] evm: security.selinux
202[ 0.060267] evm: security.SMACK64
203[ 0.060268] evm: security.SMACK64EXEC
204[ 0.060268] evm: security.SMACK64TRANSMUTE
205[ 0.060268] evm: security.SMACK64MMAP
206[ 0.060269] evm: security.ima
207[ 0.060270] evm: security.capability
208[ 0.060282] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
209[ 0.060282] futex hash table entries: 1024 (order: 4, 65536 bytes)
210[ 0.060282] pinctrl core: initialized pinctrl subsystem
211[ 0.060282] RTC time: 19:15:48, date: 06/02/19
212[ 0.060286] NET: Registered protocol family 16
213[ 0.060444] cpuidle: using governor ladder
214[ 0.060444] cpuidle: using governor menu
215[ 0.060444] PCCT header not found.
216[ 0.060444] ACPI: bus type PCI registered
217[ 0.060444] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
218[ 0.060444] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
219[ 0.060444] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
220[ 0.060444] PCI: Using configuration type 1 for base access
221[ 0.060444] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
222[ 0.060997] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
223[ 0.060997] ACPI: Added _OSI(Module Device)
224[ 0.060997] ACPI: Added _OSI(Processor Device)
225[ 0.060997] ACPI: Added _OSI(3.0 _SCP Extensions)
226[ 0.060997] ACPI: Added _OSI(Processor Aggregator Device)
227[ 0.060997] ACPI: Executed 1 blocks of module-level executable AML code
228[ 0.064783] ACPI: EC: EC started
229[ 0.064784] ACPI: EC: interrupt blocked
230[ 0.065291] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
231[ 0.065293] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
232[ 0.065294] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
233[ 0.065294] ACPI: Interpreter enabled
234[ 0.065311] ACPI: (supports S0 S3 S4 S5)
235[ 0.065312] ACPI: Using IOAPIC for interrupt routing
236[ 0.065327] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
237[ 0.065440] ACPI: Enabled 1 GPEs in block 00 to 3F
238[ 0.071634] ACPI: Power Resource [FPWR] (off)
239[ 0.071940] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
240[ 0.071945] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
241[ 0.071986] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
242[ 0.071995] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
243[ 0.072049] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff])
244[ 0.072197] PCI host bridge to bus 0000:00
245[ 0.072199] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
246[ 0.072201] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
247[ 0.072202] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
248[ 0.072203] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
249[ 0.072205] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
250[ 0.072206] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
251[ 0.072207] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
252[ 0.072209] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
253[ 0.072210] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
254[ 0.072211] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
255[ 0.072212] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
256[ 0.072214] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
257[ 0.072215] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
258[ 0.072216] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
259[ 0.072217] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
260[ 0.072219] pci_bus 0000:00: root bus resource [mem 0x7da00001-0xefffffff window]
261[ 0.072220] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
262[ 0.072222] pci_bus 0000:00: root bus resource [bus 00-ff]
263[ 0.072230] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
264[ 0.072312] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
265[ 0.072324] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
266[ 0.072330] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
267[ 0.072334] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
268[ 0.072405] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
269[ 0.072415] pci 0000:00:04.0: reg 0x10: [mem 0xe1520000-0xe1527fff 64bit]
270[ 0.072509] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
271[ 0.072529] pci 0000:00:19.0: reg 0x10: [mem 0xe1500000-0xe151ffff]
272[ 0.072538] pci 0000:00:19.0: reg 0x14: [mem 0xe152c000-0xe152cfff]
273[ 0.072546] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
274[ 0.072604] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
275[ 0.072665] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
276[ 0.072686] pci 0000:00:1a.0: reg 0x10: [mem 0xe152f000-0xe152f3ff]
277[ 0.072768] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
278[ 0.072835] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
279[ 0.072857] pci 0000:00:1b.0: reg 0x10: [mem 0xe1528000-0xe152bfff 64bit]
280[ 0.072929] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
281[ 0.073004] pci 0000:00:1c.0: [8086:1c12] type 01 class 0x060400
282[ 0.073130] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
283[ 0.073213] pci 0000:00:1c.1: [8086:1c16] type 01 class 0x060400
284[ 0.073350] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
285[ 0.073432] pci 0000:00:1c.3: [8086:1c18] type 01 class 0x060400
286[ 0.073568] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
287[ 0.073651] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
288[ 0.073674] pci 0000:00:1d.0: reg 0x10: [mem 0xe1530000-0xe15303ff]
289[ 0.073755] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
290[ 0.073821] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
291[ 0.073984] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
292[ 0.074004] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
293[ 0.074012] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
294[ 0.074020] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
295[ 0.074029] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
296[ 0.074037] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
297[ 0.074046] pci 0000:00:1f.2: reg 0x24: [mem 0xe152e000-0xe152e7ff]
298[ 0.074089] pci 0000:00:1f.2: PME# supported from D3hot
299[ 0.074149] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
300[ 0.074168] pci 0000:00:1f.3: reg 0x10: [mem 0xe1531000-0xe15310ff 64bit]
301[ 0.074188] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
302[ 0.074264] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000
303[ 0.074287] pci 0000:00:1f.6: reg 0x10: [mem 0xe152d000-0xe152dfff 64bit]
304[ 0.074450] pci 0000:00:1c.0: PCI bridge to [bus 01]
305[ 0.074535] pci 0000:00:1c.1: PCI bridge to [bus 02]
306[ 0.074539] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
307[ 0.074545] pci 0000:00:1c.1: bridge window [mem 0xe0800000-0xe0ffffff]
308[ 0.074553] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
309[ 0.074651] pci 0000:03:00.0: [1180:e822] type 00 class 0x080501
310[ 0.074691] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
311[ 0.074741] pci 0000:03:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
312[ 0.075045] pci 0000:03:00.0: supports D1 D2
313[ 0.075046] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
314[ 0.084063] pci 0000:00:1c.3: PCI bridge to [bus 03]
315[ 0.084070] pci 0000:00:1c.3: bridge window [mem 0xe1400000-0xe14fffff]
316[ 0.084230] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
317[ 0.084273] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
318[ 0.084315] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
319[ 0.084355] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
320[ 0.084396] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
321[ 0.084436] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
322[ 0.084476] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
323[ 0.084517] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
324[ 0.085414] ACPI: EC: interrupt unblocked
325[ 0.085420] ACPI: EC: event unblocked
326[ 0.085425] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
327[ 0.085427] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
328[ 0.085602] SCSI subsystem initialized
329[ 0.085632] libata version 3.00 loaded.
330[ 0.085632] pci 0000:00:02.0: vgaarb: setting as boot VGA device
331[ 0.085632] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
332[ 0.085632] pci 0000:00:02.0: vgaarb: bridge control possible
333[ 0.085632] vgaarb: loaded
334[ 0.085632] ACPI: bus type USB registered
335[ 0.085632] usbcore: registered new interface driver usbfs
336[ 0.085632] usbcore: registered new interface driver hub
337[ 0.085632] usbcore: registered new device driver usb
338[ 0.085632] EDAC MC: Ver: 3.0.0
339[ 0.085632] PCI: Using ACPI for IRQ routing
340[ 0.085632] PCI: pci_cache_line_size set to 64 bytes
341[ 0.085632] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
342[ 0.085632] e820: reserve RAM buffer [mem 0x7af2c000-0x7bffffff]
343[ 0.085632] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
344[ 0.085693] NetLabel: Initializing
345[ 0.085693] NetLabel: domain hash size = 128
346[ 0.085694] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
347[ 0.085708] NetLabel: unlabeled traffic allowed by default
348[ 0.085720] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
349[ 0.085720] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
350[ 0.089018] clocksource: Switched to clocksource hpet
351[ 0.097840] VFS: Disk quotas dquot_6.6.0
352[ 0.097862] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
353[ 0.097962] AppArmor: AppArmor Filesystem Enabled
354[ 0.098007] pnp: PnP ACPI init
355[ 0.098146] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
356[ 0.098147] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
357[ 0.098149] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
358[ 0.098151] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
359[ 0.098152] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
360[ 0.098154] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
361[ 0.098156] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
362[ 0.098157] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
363[ 0.098159] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
364[ 0.098161] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
365[ 0.098164] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
366[ 0.098673] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
367[ 0.098676] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
368[ 0.098712] system 00:02: [io 0x0500-0x057f] has been reserved
369[ 0.098713] system 00:02: [io 0x0480-0x04bf] has been reserved
370[ 0.098716] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
371[ 0.098734] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
372[ 0.098762] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
373[ 0.098784] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
374[ 0.098809] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
375[ 0.098828] pnp: PnP ACPI: found 7 devices
376[ 0.105047] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
377[ 0.105091] pci 0000:00:1c.0: PCI bridge to [bus 01]
378[ 0.105109] pci 0000:00:1c.1: PCI bridge to [bus 02]
379[ 0.105112] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
380[ 0.105119] pci 0000:00:1c.1: bridge window [mem 0xe0800000-0xe0ffffff]
381[ 0.105124] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
382[ 0.105132] pci 0000:00:1c.3: PCI bridge to [bus 03]
383[ 0.105140] pci 0000:00:1c.3: bridge window [mem 0xe1400000-0xe14fffff]
384[ 0.105152] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
385[ 0.105154] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
386[ 0.105155] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
387[ 0.105156] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
388[ 0.105158] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
389[ 0.105159] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
390[ 0.105161] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
391[ 0.105162] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
392[ 0.105163] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
393[ 0.105165] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
394[ 0.105166] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
395[ 0.105167] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
396[ 0.105169] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
397[ 0.105170] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
398[ 0.105171] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
399[ 0.105173] pci_bus 0000:00: resource 19 [mem 0x7da00001-0xefffffff window]
400[ 0.105174] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
401[ 0.105176] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
402[ 0.105177] pci_bus 0000:02: resource 1 [mem 0xe0800000-0xe0ffffff]
403[ 0.105178] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
404[ 0.105180] pci_bus 0000:03: resource 1 [mem 0xe1400000-0xe14fffff]
405[ 0.105253] NET: Registered protocol family 2
406[ 0.105394] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
407[ 0.105440] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
408[ 0.105501] TCP: Hash tables configured (established 16384 bind 16384)
409[ 0.105535] UDP hash table entries: 1024 (order: 3, 32768 bytes)
410[ 0.105545] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
411[ 0.105587] NET: Registered protocol family 1
412[ 0.105599] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
413[ 0.106016] PCI: CLS 64 bytes, default 64
414[ 0.106055] Unpacking initramfs...
415[ 0.802791] Freeing initrd memory: 48536K
416[ 0.802845] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
417[ 0.802848] software IO TLB [mem 0x72a00000-0x76a00000] (64MB) mapped at [ffff9fd2f2a00000-ffff9fd2f69fffff]
418[ 0.803098] Scanning for low memory corruption every 60 seconds
419[ 0.803385] audit: initializing netlink subsys (disabled)
420[ 0.803434] audit: type=2000 audit(1559502948.803:1): state=initialized audit_enabled=0 res=1
421[ 0.803761] Initialise system trusted keyrings
422[ 0.803770] Key type blacklist registered
423[ 0.803801] workingset: timestamp_bits=36 max_order=19 bucket_order=0
424[ 0.804861] zbud: loaded
425[ 0.805316] squashfs: version 4.0 (2009/01/31) Phillip Lougher
426[ 0.805440] fuse init (API version 7.26)
427[ 0.806706] Key type asymmetric registered
428[ 0.806707] Asymmetric key parser 'x509' registered
429[ 0.806739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
430[ 0.806768] io scheduler noop registered
431[ 0.806769] io scheduler deadline registered
432[ 0.806793] io scheduler cfq registered (default)
433[ 0.807525] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
434[ 0.807550] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
435[ 0.807570] pcieport 0000:00:1c.3: Signaling PME with IRQ 28
436[ 0.807594] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
437[ 0.807678] intel_idle: MWAIT substates: 0x21120
438[ 0.807679] intel_idle: v0.4.1 model 0x3A
439[ 0.807811] intel_idle: lapic_timer_reliable_states 0xffffffff
440[ 0.808026] ACPI: AC Adapter [AC] (on-line)
441[ 0.808079] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input0
442[ 0.808108] ACPI: Sleep Button [SLPB]
443[ 0.808242] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input1
444[ 0.808370] ACPI: Lid Switch [LID]
445[ 0.808416] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
446[ 0.808438] ACPI: Power Button [PWRF]
447[ 0.810156] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
448[ 0.811112] thermal LNXTHERM:00: registered as thermal_zone0
449[ 0.811113] ACPI: Thermal Zone [THM0] (45 C)
450[ 0.812056] thermal LNXTHERM:01: registered as thermal_zone1
451[ 0.812057] ACPI: Thermal Zone [THM1] (27 C)
452[ 0.812078] GHES: HEST is not enabled!
453[ 0.812165] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
454[ 0.813707] Linux agpgart interface v0.103
455[ 0.822979] ACPI: Battery Slot [BAT0] (battery present)
456[ 0.823087] ACPI: Battery Slot [BAT1] (battery absent)
457[ 0.828116] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
458[ 0.894170] loop: module loaded
459[ 0.894313] libphy: Fixed MDIO Bus: probed
460[ 0.894314] tun: Universal TUN/TAP device driver, 1.6
461[ 0.894346] PPP generic driver version 2.4.2
462[ 0.894385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
463[ 0.894387] ehci-pci: EHCI PCI platform driver
464[ 0.894482] ehci-pci 0000:00:1a.0: EHCI Host Controller
465[ 0.894488] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
466[ 0.894501] ehci-pci 0000:00:1a.0: debug port 2
467[ 0.898416] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
468[ 0.898429] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe152f000
469[ 0.916014] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
470[ 0.916054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
471[ 0.916055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
472[ 0.916057] usb usb1: Product: EHCI Host Controller
473[ 0.916058] usb usb1: Manufacturer: Linux 4.13.0-41-generic ehci_hcd
474[ 0.916059] usb usb1: SerialNumber: 0000:00:1a.0
475[ 0.916252] hub 1-0:1.0: USB hub found
476[ 0.916260] hub 1-0:1.0: 3 ports detected
477[ 0.916452] ehci-pci 0000:00:1d.0: EHCI Host Controller
478[ 0.916456] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
479[ 0.916467] ehci-pci 0000:00:1d.0: debug port 2
480[ 0.920357] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
481[ 0.920369] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1530000
482[ 0.936054] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
483[ 0.936112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
484[ 0.936113] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
485[ 0.936115] usb usb2: Product: EHCI Host Controller
486[ 0.936116] usb usb2: Manufacturer: Linux 4.13.0-41-generic ehci_hcd
487[ 0.936117] usb usb2: SerialNumber: 0000:00:1d.0
488[ 0.936283] hub 2-0:1.0: USB hub found
489[ 0.936289] hub 2-0:1.0: 3 ports detected
490[ 0.936375] ehci-platform: EHCI generic platform driver
491[ 0.936383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
492[ 0.936387] ohci-pci: OHCI PCI platform driver
493[ 0.936395] ohci-platform: OHCI generic platform driver
494[ 0.936400] uhci_hcd: USB Universal Host Controller Interface driver
495[ 0.936443] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
496[ 0.940024] serio: i8042 KBD port at 0x60,0x64 irq 1
497[ 0.940027] serio: i8042 AUX port at 0x60,0x64 irq 12
498[ 0.940294] mousedev: PS/2 mouse device common for all mice
499[ 0.940658] rtc_cmos 00:03: RTC can wake from S4
500[ 0.940772] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
501[ 0.940800] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
502[ 0.940806] i2c /dev entries driver
503[ 0.940850] device-mapper: uevent: version 1.0.3
504[ 0.940906] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
505[ 0.940911] intel_pstate: Intel P-state driver initializing
506[ 0.941057] ledtrig-cpu: registered to indicate activity on CPUs
507[ 0.941350] NET: Registered protocol family 10
508[ 0.943754] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
509[ 0.944899] Segment Routing with IPv6
510[ 0.944919] NET: Registered protocol family 17
511[ 0.944929] Key type dns_resolver registered
512[ 0.945112] RAS: Correctable Errors collector initialized.
513[ 0.945134] microcode: sig=0x306a9, pf=0x10, revision=0x20
514[ 0.945184] microcode: Microcode Update Driver: v2.2.
515[ 0.945236] sched_clock: Marking stable (945181070, 0)->(943730843, 1450227)
516[ 0.945407] registered taskstats version 1
517[ 0.945414] Loading compiled-in X.509 certificates
518[ 0.947413] Loaded X.509 cert 'Build time autogenerated kernel key: 455b6c2f89645ccacce587853289bc763cf1d7aa'
519[ 0.947429] zswap: loaded using pool lzo/zbud
520[ 0.950116] Key type big_key registered
521[ 0.950119] Key type trusted registered
522[ 0.951418] Key type encrypted registered
523[ 0.951420] AppArmor: AppArmor sha1 policy hashing enabled
524[ 1.108135] evm: HMAC attrs: 0x1
525[ 1.108392] Magic number: 7:883:292
526[ 1.108418] tty tty25: hash matches
527[ 1.108516] rtc_cmos 00:03: setting system clock to 2019-06-02 19:15:49 UTC (1559502949)
528[ 1.108571] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
529[ 1.108571] EDD information not available.
530[ 1.108603] PM: Hibernation image not present or could not be loaded.
531[ 1.110474] Freeing unused kernel memory: 2368K
532[ 1.110475] Write protecting the kernel read-only data: 18432k
533[ 1.111045] Freeing unused kernel memory: 2024K
534[ 1.111283] Freeing unused kernel memory: 88K
535[ 1.112911] x86/mm: Checked W+X mappings: passed, no W+X pages found.
536[ 1.112912] x86/mm: Checking user space page tables
537[ 1.114299] x86/mm: Checked W+X mappings: passed, no W+X pages found.
538[ 1.165190] pps_core: LinuxPPS API ver. 1 registered
539[ 1.165192] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
540[ 1.166720] PTP clock support registered
541[ 1.166804] sdhci: Secure Digital Host Controller Interface driver
542[ 1.166805] sdhci: Copyright(c) Pierre Ossman
543[ 1.167932] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 8)
544[ 1.172331] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
545[ 1.172332] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
546[ 1.172499] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
547[ 1.173552] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
548[ 1.244053] usb 1-1: new high-speed USB device number 2 using ehci-pci
549[ 1.264351] usb 2-1: new high-speed USB device number 2 using ehci-pci
550[ 1.279806] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
551[ 1.377651] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:c0:af:a4
552[ 1.377653] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
553[ 1.377705] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
554[ 1.377733] ahci 0000:00:1f.2: version 3.0
555[ 1.377927] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
556[ 1.378310] e1000e 0000:00:19.0 enp0s25: renamed from eth0
557[ 1.388080] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
558[ 1.388099] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
559[ 1.388691] scsi host0: ahci
560[ 1.388887] scsi host1: ahci
561[ 1.388998] scsi host2: ahci
562[ 1.389093] scsi host3: ahci
563[ 1.389182] scsi host4: ahci
564[ 1.389264] scsi host5: ahci
565[ 1.389302] ata1: SATA max UDMA/133 abar m2048@0xe152e000 port 0xe152e100 irq 30
566[ 1.389305] ata2: SATA max UDMA/133 abar m2048@0xe152e000 port 0xe152e180 irq 30
567[ 1.389307] ata3: SATA max UDMA/133 abar m2048@0xe152e000 port 0xe152e200 irq 30
568[ 1.389309] ata4: SATA max UDMA/133 abar m2048@0xe152e000 port 0xe152e280 irq 30
569[ 1.389311] ata5: SATA max UDMA/133 abar m2048@0xe152e000 port 0xe152e300 irq 30
570[ 1.389311] ata6: DUMMY
571[ 1.389756] [drm] Memory usable by graphics device = 2048M
572[ 1.389757] [drm] Replacing VGA console driver
573[ 1.390279] Console: switching to colour dummy device 80x25
574[ 1.400608] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
575[ 1.400611] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
576[ 1.400889] hub 1-1:1.0: USB hub found
577[ 1.400979] hub 1-1:1.0: 6 ports detected
578[ 1.416540] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
579[ 1.416545] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
580[ 1.416949] hub 2-1:1.0: USB hub found
581[ 1.417001] hub 2-1:1.0: 8 ports detected
582[ 1.448623] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
583[ 1.448624] [drm] Driver supports precise vblank timestamp query.
584[ 1.449426] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
585[ 1.523124] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
586[ 1.523250] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
587[ 1.688079] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
588[ 1.702980] ata1: SATA link down (SStatus 0 SControl 300)
589[ 1.704036] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
590[ 1.749309] acpi device:0d: registered as cooling_device5
591[ 1.749370] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
592[ 1.797673] usb 1-1.1: New USB device found, idVendor=152d, idProduct=2352
593[ 1.797678] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
594[ 1.797681] usb 1-1.1: Product: USB to ATA/ATAPI Bridge
595[ 1.797684] usb 1-1.1: Manufacturer: JMicron
596[ 1.797687] usb 1-1.1: SerialNumber: 02442105729F
597[ 1.800783] usb-storage 1-1.1:1.0: USB Mass Storage device detected
598[ 1.800916] scsi host6: usb-storage 1-1.1:1.0
599[ 1.800986] usbcore: registered new interface driver usb-storage
600[ 1.802058] usbcore: registered new interface driver uas
601[ 1.820051] tsc: Refined TSC clocksource calibration: 2594.107 MHz
602[ 1.820058] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
603[ 1.953733] fbcon: inteldrmfb (fb0) is primary device
604[ 1.953802] Console: switching to colour frame buffer device 200x56
605[ 1.953825] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
606[ 2.019040] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
607[ 2.021616] ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LT20, max UDMA/66
608[ 2.024607] ata2.00: configured for UDMA/66
609[ 2.027716] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT33N LT20 PQ: 0 ANSI: 5
610[ 2.028855] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
611[ 2.047941] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
612[ 2.056098] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
613[ 2.056100] cdrom: Uniform CD-ROM driver Revision: 3.20
614[ 2.056302] sr 1:0:0:0: Attached scsi CD-ROM sr0
615[ 2.056447] sr 1:0:0:0: Attached scsi generic sg0 type 5
616[ 2.208094] usb 2-1.2: device not accepting address 3, error -71
617[ 2.371628] ata3: SATA link down (SStatus 0 SControl 300)
618[ 2.687255] ata4: SATA link down (SStatus 0 SControl 300)
619[ 2.813037] scsi 6:0:0:0: Direct-Access PLEXTOR PX-128M6Pro PQ: 0 ANSI: 2 CCS
620[ 2.813348] sd 6:0:0:0: Attached scsi generic sg1 type 0
621[ 2.813889] sd 6:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
622[ 2.814962] sd 6:0:0:0: [sda] Write Protect is off
623[ 2.814964] sd 6:0:0:0: [sda] Mode Sense: 34 00 00 00
624[ 2.816106] sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
625[ 2.820457] sda: sda1 sda2 < sda5 >
626[ 2.824004] sd 6:0:0:0: [sda] Attached SCSI disk
627[ 2.844147] clocksource: Switched to clocksource tsc
628[ 2.972071] usb 2-1.4: new high-speed USB device number 5 using ehci-pci
629[ 3.002579] ata5: SATA link down (SStatus 0 SControl 300)
630[ 3.093490] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
631[ 3.093492] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
632[ 3.093494] usb 2-1.4: Product: F5521gw
633[ 3.093495] usb 2-1.4: Manufacturer: Lenovo
634[ 3.093496] usb 2-1.4: SerialNumber: 9F09B3F193126E80
635[ 3.208077] usb 2-1.5: new full-speed USB device number 6 using ehci-pci
636[ 3.209813] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
637[ 3.322733] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
638[ 3.322735] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
639[ 3.322736] usb 2-1.5: Product: Integrated Smart Card Reader
640[ 3.322738] usb 2-1.5: Manufacturer: Lenovo
641[ 3.533285] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
642[ 3.552312] systemd[1]: Detected architecture x86-64.
643[ 3.553237] systemd[1]: Set hostname to <ubuntu>.
644[ 3.806554] systemd[1]: Listening on Syslog Socket.
645[ 3.806634] systemd[1]: Listening on Journal Socket.
646[ 3.806661] systemd[1]: Listening on udev Kernel Socket.
647[ 3.806688] systemd[1]: Listening on udev Control Socket.
648[ 3.806705] systemd[1]: Listening on fsck to fsckd communication Socket.
649[ 3.806713] systemd[1]: Reached target User and Group Name Lookups.
650[ 3.806719] systemd[1]: Reached target Remote File Systems (Pre).
651[ 4.121372] lp: driver loaded but no devices found
652[ 4.127501] ppdev: user-space parallel port driver
653[ 4.220066] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
654[ 4.329733] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=8151
655[ 4.329736] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
656[ 4.329737] usb 2-1.2: Product: USB 10/100 LAN
657[ 4.329738] usb 2-1.2: Manufacturer: Realtek
658[ 4.329739] usb 2-1.2: SerialNumber: 00E04C36134878
659[ 4.330310] usb-storage 2-1.2:1.0: USB Mass Storage device detected
660[ 4.330462] scsi host7: usb-storage 2-1.2:1.0
661[ 5.340900] scsi 7:0:0:0: CD-ROM Realtek USB CD-ROM 2.00 PQ: 0 ANSI: 0
662[ 5.341608] sr 7:0:0:0: [sr1] scsi3-mmc drive: 62x/62x cd/rw xa/form2 cdda tray
663[ 5.341743] sr 7:0:0:0: Attached scsi CD-ROM sr1
664[ 5.341792] sr 7:0:0:0: Attached scsi generic sg2 type 5
665[ 6.336244] random: crng init done
666[ 7.878219] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
667[ 7.931160] systemd-journald[260]: Received request to flush runtime journal from PID 1
668[ 8.175222] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170531/utaddress-247)
669[ 8.175227] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
670[ 8.175229] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247)
671[ 8.175232] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
672[ 8.175232] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247)
673[ 8.175235] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
674[ 8.175235] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247)
675[ 8.175238] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
676[ 8.175238] lpc_ich: Resource conflict(s) found affecting gpio_ich
677[ 8.190640] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
678[ 8.240755] Non-volatile memory driver v1.3
679[ 8.276604] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
680[ 8.276605] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
681[ 8.276606] RAPL PMU: hw unit of domain package 2^-16 Joules
682[ 8.276607] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
683[ 8.278806] audit: type=1400 audit(1559502956.670:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=527 comm="apparmor_parser"
684[ 8.278810] audit: type=1400 audit(1559502956.670:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=527 comm="apparmor_parser"
685[ 8.278812] audit: type=1400 audit(1559502956.670:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=527 comm="apparmor_parser"
686[ 8.278814] audit: type=1400 audit(1559502956.670:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=527 comm="apparmor_parser"
687[ 8.279911] audit: type=1400 audit(1559502956.671:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=526 comm="apparmor_parser"
688[ 8.279914] audit: type=1400 audit(1559502956.671:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=526 comm="apparmor_parser"
689[ 8.284147] audit: type=1400 audit(1559502956.675:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=533 comm="apparmor_parser"
690[ 8.286082] audit: type=1400 audit(1559502956.677:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=532 comm="apparmor_parser"
691[ 8.286086] audit: type=1400 audit(1559502956.677:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=532 comm="apparmor_parser"
692[ 8.289889] audit: type=1400 audit(1559502956.681:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=535 comm="apparmor_parser"
693[ 8.352045] AVX version of gcm_enc/dec engaged.
694[ 8.352047] AES CTR mode by8 optimization enabled
695[ 8.365818] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
696[ 8.382116] thinkpad_acpi: ThinkPad ACPI Extras v0.25
697[ 8.382118] thinkpad_acpi: http://ibm-acpi.sf.net/
698[ 8.382119] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-1860-g2761847-dirty, EC 83HT30WW-3.20
699[ 8.382120] thinkpad_acpi: Lenovo ThinkPad T420, model 4236W9B
700[ 8.382281] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
701[ 8.382518] thinkpad_acpi: radio switch found; radios are enabled
702[ 8.382624] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
703[ 8.382634] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
704[ 8.382635] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
705[ 8.383757] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
706[ 8.384438] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is blocked
707[ 8.385719] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
708[ 8.385779] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
709[ 8.386781] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
710[ 8.389803] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
711[ 8.390290] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
712[ 8.390292] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
713[ 8.390294] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
714[ 8.390295] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
715[ 8.390297] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x20/0x22
716[ 8.390298] snd_hda_codec_conexant hdaudioC0D0: inputs:
717[ 8.390300] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
718[ 8.390302] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
719[ 8.391787] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
720[ 8.399762] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
721[ 8.399803] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
722[ 8.399839] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
723[ 8.399877] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
724[ 8.399912] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
725[ 8.399946] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
726[ 8.443053] intel_rapl: Found RAPL domain package
727[ 8.443054] intel_rapl: Found RAPL domain core
728[ 8.443055] intel_rapl: Found RAPL domain uncore
729[ 9.056117] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
730[ 9.169956] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
731[ 9.169960] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
732[ 9.169970] usb 1-1.4: Product: Broadcom Bluetooth Device
733[ 9.169972] usb 1-1.4: Manufacturer: Broadcom Corp
734[ 9.169973] usb 1-1.4: SerialNumber: 402CF4E05EB0
735[ 9.803890] Bluetooth: Core ver 2.22
736[ 9.803909] NET: Registered protocol family 31
737[ 9.803910] Bluetooth: HCI device and connection manager initialized
738[ 9.803913] Bluetooth: HCI socket layer initialized
739[ 9.803915] Bluetooth: L2CAP socket layer initialized
740[ 9.803919] Bluetooth: SCO socket layer initialized
741[ 9.811170] usbcore: registered new interface driver btusb
742[ 9.995147] Adding 8310780k swap on /dev/sda5. Priority:-1 extents:1 across:8310780k FS
743[ 10.334506] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
744[ 10.334508] Bluetooth: BNEP filters: protocol multicast
745[ 10.334510] Bluetooth: BNEP socket layer initialized
746[ 10.955330] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
747[ 10.955657] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
748[ 10.955880] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
749[ 10.957819] usbcore: registered new interface driver cdc_acm
750[ 10.957820] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
751[ 10.958142] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
752[ 10.958200] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
753[ 10.958220] usbcore: registered new interface driver cdc_wdm
754[ 10.993068] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
755[ 10.993484] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
756[ 10.993514] usbcore: registered new interface driver cdc_ncm
757[ 11.003706] usbcore: registered new interface driver cdc_mbim
758[ 11.004958] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
759[ 12.094626] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
760[ 12.324305] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
761[ 17.303122] Bluetooth: RFCOMM TTY layer initialized
762[ 17.303141] Bluetooth: RFCOMM socket layer initialized
763[ 17.303147] Bluetooth: RFCOMM ver 1.11
764[ 18.815384] thinkpad_ec: loading out-of-tree module taints kernel.
765[ 18.815423] thinkpad_ec: module verification failed: signature and/or required key missing - tainting kernel
766[ 18.816011] thinkpad_ec: thinkpad_ec 0.42 loaded.
767[ 18.816720] tp_smapi 0.42 loading...
768[ 18.816727] SMAPI not supported (ID=0x45)
769[ 18.816730] tp_smapi init failed (ret=-6)!
770[ 18.887587] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
771[ 18.900885] tp_smapi 0.42 loading...
772[ 18.900891] SMAPI not supported (ID=0x45)
773[ 18.900895] tp_smapi init failed (ret=-6)!
774[ 18.954614] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
775[ 41.625636] usb 2-1.2: USB disconnect, device number 7
776[ 42.616116] usb 2-1.2: new high-speed USB device number 8 using ehci-pci
777[ 42.725466] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=8152
778[ 42.725472] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
779[ 42.725475] usb 2-1.2: Product: USB 10/100 LAN
780[ 42.725478] usb 2-1.2: Manufacturer: Realtek
781[ 42.725480] usb 2-1.2: SerialNumber: 00E04C361348
782[ 43.242741] usbcore: registered new interface driver r8152
783[ 43.246225] usbcore: registered new interface driver cdc_ether
784[ 43.328091] usb 2-1.2: reset high-speed USB device number 8 using ehci-pci
785[ 43.497606] r8152 2-1.2:1.0 eth0: v1.09.9
786[ 44.253603] r8152 2-1.2:1.0 enx00e04c361348: renamed from eth0
787[ 44.290581] IPv6: ADDRCONF(NETDEV_UP): enx00e04c361348: link is not ready
788[ 44.320394] IPv6: ADDRCONF(NETDEV_UP): enx00e04c361348: link is not ready
789[ 44.987636] r8152 2-1.2:1.0 enx00e04c361348: carrier on
790[ 44.987712] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c361348: link becomes ready
791[ 68.590187] NOHZ: local_softirq_pending 08
792[ 85.430483] NOHZ: local_softirq_pending 08