blob: de648c8bf922a6c6470097e12b089e22e838cc2c [file] [log] [blame]
Uli Breidenbachfc1c2322022-11-06 17:45:41 +01001[ 0.000000] Linux version 5.15.0-52-generic (buildd@lcy02-amd64-045) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #58~20.04.1-Ubuntu SMP Thu Oct 13 13:09:46 UTC 2022 (Ubuntu 5.15.0-52.58~20.04.1-generic 5.15.60)
2[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-52-generic root=UUID=733358f7-57b8-4696-a693-247bac1c3e59 ro quiet splash iomem=relaxed vt.handoff=7
3[ 0.000000] KERNEL supported cpus:
4[ 0.000000] Intel GenuineIntel
5[ 0.000000] AMD AuthenticAMD
6[ 0.000000] Hygon HygonGenuine
7[ 0.000000] Centaur CentaurHauls
8[ 0.000000] zhaoxin Shanghai
9[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
10[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
11[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
12[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
13[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
14[ 0.000000] signal: max sigframe size: 1776
15[ 0.000000] BIOS-provided physical RAM map:
16[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
17[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
19[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff27fff] usable
20[ 0.000000] BIOS-e820: [mem 0x000000007ff28000-0x00000000829fffff] reserved
21[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
22[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017d5fffff] usable
23[ 0.000000] NX (Execute Disable) protection: active
24[ 0.000000] SMBIOS 3.0.0 present.
25[ 0.000000] DMI: GIGABYTE GA-B75M-D3H/GA-B75M-D3H, BIOS 4.12-15826-g6b8c06dc39 11/05/2022
26[ 0.000000] tsc: Fast TSC calibration using PIT
27[ 0.000000] tsc: Detected 3491.876 MHz processor
28[ 0.000885] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
29[ 0.000888] e820: remove [mem 0x000a0000-0x000fffff] usable
30[ 0.000892] last_pfn = 0x17d600 max_arch_pfn = 0x400000000
31[ 0.001000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
32[ 0.001573] last_pfn = 0x7ff28 max_arch_pfn = 0x400000000
33[ 0.010050] RAMDISK: [mem 0x2fac9000-0x33d5bfff]
34[ 0.010055] ACPI: Early table checksum verification disabled
35[ 0.010058] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
36[ 0.010062] ACPI: XSDT 0x000000007FF420E0 00004C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
37[ 0.010068] ACPI: FACP 0x000000007FF445D0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20220331)
38[ 0.010074] ACPI: DSDT 0x000000007FF42280 00234B (v02 COREv4 COREBOOT 20141018 INTL 20220331)
39[ 0.010077] ACPI: FACS 0x000000007FF42240 000040
40[ 0.010080] ACPI: FACS 0x000000007FF42240 000040
41[ 0.010083] ACPI: SSDT 0x000000007FF446F0 0020B4 (v02 COREv4 COREBOOT 0000002A CORE 20220331)
42[ 0.010086] ACPI: MCFG 0x000000007FF467B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
43[ 0.010089] ACPI: APIC 0x000000007FF467F0 00008C (v03 COREv4 COREBOOT 00000000 CORE 20220331)
44[ 0.010093] ACPI: HPET 0x000000007FF46880 000038 (v01 COREv4 COREBOOT 00000000 CORE 20220331)
45[ 0.010095] ACPI: Reserving FACP table memory at [mem 0x7ff445d0-0x7ff446e3]
46[ 0.010097] ACPI: Reserving DSDT table memory at [mem 0x7ff42280-0x7ff445ca]
47[ 0.010098] ACPI: Reserving FACS table memory at [mem 0x7ff42240-0x7ff4227f]
48[ 0.010099] ACPI: Reserving FACS table memory at [mem 0x7ff42240-0x7ff4227f]
49[ 0.010100] ACPI: Reserving SSDT table memory at [mem 0x7ff446f0-0x7ff467a3]
50[ 0.010100] ACPI: Reserving MCFG table memory at [mem 0x7ff467b0-0x7ff467eb]
51[ 0.010101] ACPI: Reserving APIC table memory at [mem 0x7ff467f0-0x7ff4687b]
52[ 0.010102] ACPI: Reserving HPET table memory at [mem 0x7ff46880-0x7ff468b7]
53[ 0.010210] No NUMA configuration found
54[ 0.010211] Faking a node at [mem 0x0000000000000000-0x000000017d5fffff]
55[ 0.010219] NODE_DATA(0) allocated [mem 0x17d5d4000-0x17d5fdfff]
56[ 0.010502] Zone ranges:
57[ 0.010503] DMA [mem 0x0000000000001000-0x0000000000ffffff]
58[ 0.010505] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
59[ 0.010506] Normal [mem 0x0000000100000000-0x000000017d5fffff]
60[ 0.010508] Device empty
61[ 0.010509] Movable zone start for each node
62[ 0.010512] Early memory node ranges
63[ 0.010512] node 0: [mem 0x0000000000001000-0x000000000009efff]
64[ 0.010514] node 0: [mem 0x0000000000100000-0x000000007ff27fff]
65[ 0.010515] node 0: [mem 0x0000000100000000-0x000000017d5fffff]
66[ 0.010516] Initmem setup node 0 [mem 0x0000000000001000-0x000000017d5fffff]
67[ 0.010522] On node 0, zone DMA: 1 pages in unavailable ranges
68[ 0.010573] On node 0, zone DMA: 97 pages in unavailable ranges
69[ 0.024728] On node 0, zone Normal: 216 pages in unavailable ranges
70[ 0.024892] On node 0, zone Normal: 10752 pages in unavailable ranges
71[ 0.024907] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
72[ 0.025042] ACPI: PM-Timer IO Port: 0x508
73[ 0.025061] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
74[ 0.025064] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
75[ 0.025066] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
76[ 0.025070] ACPI: Using ACPI (MADT) for SMP configuration information
77[ 0.025071] ACPI: HPET id: 0x8086a701 base: 0xfed00000
78[ 0.025076] TSC deadline timer available
79[ 0.025078] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
80[ 0.025087] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
81[ 0.025089] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
82[ 0.025090] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
83[ 0.025091] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
84[ 0.025092] PM: hibernation: Registered nosave memory: [mem 0x7ff28000-0x829fffff]
85[ 0.025093] PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
86[ 0.025094] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
87[ 0.025094] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xffffffff]
88[ 0.025096] [mem 0x82a00000-0xefffffff] available for PCI devices
89[ 0.025097] Booting paravirtualized kernel on bare hardware
90[ 0.025100] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
91[ 0.025107] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
92[ 0.025459] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u262144
93[ 0.025463] pcpu-alloc: s208896 r8192 d28672 u262144 alloc=1*2097152
94[ 0.025466] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
95[ 0.025492] Built 1 zonelists, mobility grouping on. Total pages: 1021139
96[ 0.025493] Policy zone: Normal
97[ 0.025495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-52-generic root=UUID=733358f7-57b8-4696-a693-247bac1c3e59 ro quiet splash iomem=relaxed vt.handoff=7
98[ 0.025588] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-52-generic", will be passed to user space.
99[ 0.026051] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
100[ 0.026264] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
101[ 0.026351] mem auto-init: stack:off, heap alloc:on, heap free:off
102[ 0.065372] Memory: 3895720K/4150040K available (16393K kernel code, 4373K rwdata, 10784K rodata, 3228K init, 6580K bss, 254060K reserved, 0K cma-reserved)
103[ 0.065665] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
104[ 0.065683] Kernel/User page tables isolation: enabled
105[ 0.065702] ftrace: allocating 50013 entries in 196 pages
106[ 0.087291] ftrace: allocated 196 pages with 3 groups
107[ 0.087433] rcu: Hierarchical RCU implementation.
108[ 0.087434] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
109[ 0.087436] Rude variant of Tasks RCU enabled.
110[ 0.087436] Tracing variant of Tasks RCU enabled.
111[ 0.087437] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
112[ 0.087438] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
113[ 0.091485] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
114[ 0.091686] random: crng init done
115[ 0.091709] spurious 8259A interrupt: IRQ7.
116[ 0.091723] Console: colour dummy device 80x25
117[ 0.091732] printk: console [tty0] enabled
118[ 0.091752] ACPI: Core revision 20210730
119[ 0.091814] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
120[ 0.091830] APIC: Switch to symmetric I/O mode setup
121[ 0.092185] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
122[ 0.111832] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3255566b372, max_idle_ns: 440795337712 ns
123[ 0.111838] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.75 BogoMIPS (lpj=13967504)
124[ 0.111841] pid_max: default: 32768 minimum: 301
125[ 0.111862] LSM: Security Framework initializing
126[ 0.111871] landlock: Up and running.
127[ 0.111872] Yama: becoming mindful.
128[ 0.111894] AppArmor: AppArmor initialized
129[ 0.111930] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
130[ 0.111943] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
131[ 0.112182] CPU0: Thermal monitoring enabled (TM1)
132[ 0.112201] process: using mwait in idle threads
133[ 0.112204] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
134[ 0.112205] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
135[ 0.112208] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
136[ 0.112210] Spectre V2 : Mitigation: Retpolines
137[ 0.112211] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
138[ 0.112212] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
139[ 0.112212] Spectre V2 : Enabling Restricted Speculation for firmware calls
140[ 0.112213] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
141[ 0.112214] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
142[ 0.112216] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
143[ 0.112218] MDS: Mitigation: Clear CPU buffers
144[ 0.112219] SRBDS: Vulnerable: No microcode
145[ 0.129453] Freeing SMP alternatives memory: 40K
146[ 0.129558] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1082
147[ 0.129566] smpboot: CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
148[ 0.129701] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
149[ 0.129709] ... version: 3
150[ 0.129710] ... bit width: 48
151[ 0.129711] ... generic registers: 4
152[ 0.129711] ... value mask: 0000ffffffffffff
153[ 0.129712] ... max period: 00007fffffffffff
154[ 0.129713] ... fixed-purpose events: 3
155[ 0.129713] ... event mask: 000000070000000f
156[ 0.129820] rcu: Hierarchical SRCU implementation.
157[ 0.130454] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
158[ 0.130519] smp: Bringing up secondary CPUs ...
159[ 0.130607] x86: Booting SMP configuration:
160[ 0.130607] .... node #0, CPUs: #1
161[ 0.131939] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
162[ 0.131968] #2 #3 #4 #5 #6 #7
163[ 0.147895] smp: Brought up 1 node, 8 CPUs
164[ 0.147895] smpboot: Max logical packages: 1
165[ 0.147895] smpboot: Total of 8 processors activated (55870.01 BogoMIPS)
166[ 0.150279] devtmpfs: initialized
167[ 0.150279] x86/mm: Memory block size: 128MB
168[ 0.150279] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
169[ 0.150279] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
170[ 0.150279] pinctrl core: initialized pinctrl subsystem
171[ 0.150279] PM: RTC time: 16:21:36, date: 2022-11-06
172[ 0.150279] NET: Registered PF_NETLINK/PF_ROUTE protocol family
173[ 0.150279] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
174[ 0.150279] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
175[ 0.150279] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
176[ 0.150279] audit: initializing netlink subsys (disabled)
177[ 0.150279] audit: type=2000 audit(1667751696.056:1): state=initialized audit_enabled=0 res=1
178[ 0.150279] thermal_sys: Registered thermal governor 'fair_share'
179[ 0.150279] thermal_sys: Registered thermal governor 'bang_bang'
180[ 0.150279] thermal_sys: Registered thermal governor 'step_wise'
181[ 0.150279] thermal_sys: Registered thermal governor 'user_space'
182[ 0.150279] thermal_sys: Registered thermal governor 'power_allocator'
183[ 0.150279] EISA bus registered
184[ 0.150279] cpuidle: using governor ladder
185[ 0.150279] cpuidle: using governor menu
186[ 0.150279] ACPI: bus type PCI registered
187[ 0.150279] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
188[ 0.150279] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
189[ 0.150279] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
190[ 0.150279] PCI: Using configuration type 1 for base access
191[ 0.151840] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
192[ 0.152892] Kprobes globally optimized
193[ 0.152896] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
194[ 0.152896] ACPI: Added _OSI(Module Device)
195[ 0.152896] ACPI: Added _OSI(Processor Device)
196[ 0.152896] ACPI: Added _OSI(3.0 _SCP Extensions)
197[ 0.152896] ACPI: Added _OSI(Processor Aggregator Device)
198[ 0.152896] ACPI: Added _OSI(Linux-Dell-Video)
199[ 0.152896] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
200[ 0.152896] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
201[ 0.156419] ACPI: 2 ACPI AML tables successfully acquired and loaded
202[ 0.157121] ACPI: Interpreter enabled
203[ 0.157135] ACPI: PM: (supports S0 S3 S4 S5)
204[ 0.157136] ACPI: Using IOAPIC for interrupt routing
205[ 0.157157] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
206[ 0.157158] PCI: Using E820 reservations for host bridge windows
207[ 0.160216] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
208[ 0.160222] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
209[ 0.160278] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
210[ 0.160286] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
211[ 0.160386] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
212[ 0.160558] PCI host bridge to bus 0000:00
213[ 0.160561] pci_bus 0000:00: root bus resource [bus 00-ff]
214[ 0.160563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
215[ 0.160565] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
216[ 0.160566] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000cbfff window]
217[ 0.160567] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000fffff window]
218[ 0.160568] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
219[ 0.160569] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
220[ 0.160571] pci_bus 0000:00: root bus resource [mem 0x17d600000-0xfffffffff window]
221[ 0.160633] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
222[ 0.160761] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
223[ 0.160789] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
224[ 0.160903] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
225[ 0.160911] pci 0000:00:02.0: reg 0x10: [mem 0x82c00000-0x82ffffff 64bit]
226[ 0.160917] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
227[ 0.160921] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
228[ 0.160932] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
229[ 0.161058] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
230[ 0.161077] pci 0000:00:14.0: reg 0x10: [mem 0x82b00000-0x82b0ffff 64bit]
231[ 0.161141] pci 0000:00:14.0: PME# supported from D3hot D3cold
232[ 0.161273] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
233[ 0.161352] pci 0000:00:16.0: reg 0x10: [mem 0x82b19000-0x82b1900f 64bit]
234[ 0.161656] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
235[ 0.161835] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
236[ 0.161851] pci 0000:00:1a.0: reg 0x10: [mem 0x82b16000-0x82b163ff]
237[ 0.161929] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
238[ 0.162047] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
239[ 0.162065] pci 0000:00:1b.0: reg 0x10: [mem 0x82b10000-0x82b13fff 64bit]
240[ 0.162136] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
241[ 0.162268] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
242[ 0.162406] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
243[ 0.162551] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
244[ 0.162634] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
245[ 0.162763] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
246[ 0.162780] pci 0000:00:1d.0: reg 0x10: [mem 0x82b17000-0x82b173ff]
247[ 0.162858] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
248[ 0.162976] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
249[ 0.163130] pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100
250[ 0.163338] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
251[ 0.163351] pci 0000:00:1f.2: reg 0x10: [io 0x2060-0x2067]
252[ 0.163358] pci 0000:00:1f.2: reg 0x14: [io 0x2070-0x2073]
253[ 0.163365] pci 0000:00:1f.2: reg 0x18: [io 0x2068-0x206f]
254[ 0.163372] pci 0000:00:1f.2: reg 0x1c: [io 0x2074-0x2077]
255[ 0.163380] pci 0000:00:1f.2: reg 0x20: [io 0x2040-0x205f]
256[ 0.163387] pci 0000:00:1f.2: reg 0x24: [mem 0x82b15000-0x82b157ff]
257[ 0.163425] pci 0000:00:1f.2: PME# supported from D3hot
258[ 0.163536] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
259[ 0.163553] pci 0000:00:1f.3: reg 0x10: [mem 0x82b18000-0x82b180ff 64bit]
260[ 0.163573] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
261[ 0.163670] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
262[ 0.163690] pci 0000:00:1f.6: reg 0x10: [mem 0x82b14000-0x82b14fff 64bit]
263[ 0.163828] pci 0000:00:01.0: PCI bridge to [bus 01]
264[ 0.163884] pci 0000:00:1c.0: PCI bridge to [bus 02]
265[ 0.163960] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
266[ 0.163986] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
267[ 0.164018] pci 0000:03:00.0: reg 0x18: [mem 0x82a04000-0x82a04fff 64bit pref]
268[ 0.164038] pci 0000:03:00.0: reg 0x20: [mem 0x82a00000-0x82a03fff 64bit pref]
269[ 0.164156] pci 0000:03:00.0: supports D1 D2
270[ 0.164157] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
271[ 0.164284] pci 0000:00:1c.4: PCI bridge to [bus 03]
272[ 0.164288] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
273[ 0.164295] pci 0000:00:1c.4: bridge window [mem 0x82a00000-0x82afffff 64bit pref]
274[ 0.164311] pci_bus 0000:04: extended config space not accessible
275[ 0.164353] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
276[ 0.164362] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
277[ 0.164363] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
278[ 0.164365] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000cbfff window] (subtractive decode)
279[ 0.164366] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000fffff window] (subtractive decode)
280[ 0.164367] pci 0000:00:1e.0: bridge window [mem 0x82a00000-0xefffffff window] (subtractive decode)
281[ 0.164368] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
282[ 0.164370] pci 0000:00:1e.0: bridge window [mem 0x17d600000-0xfffffffff window] (subtractive decode)
283[ 0.164552] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
284[ 0.164608] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
285[ 0.164661] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
286[ 0.164713] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
287[ 0.164766] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
288[ 0.164818] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
289[ 0.164870] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
290[ 0.164923] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
291[ 0.165188] iommu: Default domain type: Translated
292[ 0.165188] iommu: DMA domain TLB invalidation policy: lazy mode
293[ 0.165188] SCSI subsystem initialized
294[ 0.165188] libata version 3.00 loaded.
295[ 0.165188] pci 0000:00:02.0: vgaarb: setting as boot VGA device
296[ 0.165188] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
297[ 0.165188] pci 0000:00:02.0: vgaarb: bridge control possible
298[ 0.165188] vgaarb: loaded
299[ 0.165188] ACPI: bus type USB registered
300[ 0.165188] usbcore: registered new interface driver usbfs
301[ 0.165188] usbcore: registered new interface driver hub
302[ 0.165188] usbcore: registered new device driver usb
303[ 0.165188] pps_core: LinuxPPS API ver. 1 registered
304[ 0.165188] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
305[ 0.165188] PTP clock support registered
306[ 0.165188] EDAC MC: Ver: 3.0.0
307[ 0.165188] NetLabel: Initializing
308[ 0.165188] NetLabel: domain hash size = 128
309[ 0.165188] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
310[ 0.165188] NetLabel: unlabeled traffic allowed by default
311[ 0.165188] PCI: Using ACPI for IRQ routing
312[ 0.165215] PCI: pci_cache_line_size set to 64 bytes
313[ 0.165260] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
314[ 0.165262] e820: reserve RAM buffer [mem 0x7ff28000-0x7fffffff]
315[ 0.165263] e820: reserve RAM buffer [mem 0x17d600000-0x17fffffff]
316[ 0.168196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
317[ 0.168203] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
318[ 0.170238] clocksource: Switched to clocksource tsc-early
319[ 0.173438] VFS: Disk quotas dquot_6.6.0
320[ 0.173438] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
321[ 0.173438] AppArmor: AppArmor Filesystem Enabled
322[ 0.175866] pnp: PnP ACPI init
323[ 0.176093] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
324[ 0.176096] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
325[ 0.176098] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
326[ 0.176099] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
327[ 0.176100] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
328[ 0.176101] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
329[ 0.176103] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
330[ 0.176104] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
331[ 0.176106] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
332[ 0.176107] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
333[ 0.176340] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
334[ 0.176375] system 00:02: [io 0x0500-0x057f] has been reserved
335[ 0.176377] system 00:02: [io 0x0480-0x04bf] has been reserved
336[ 0.176418] pnp: PnP ACPI: found 4 devices
337[ 0.181924] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
338[ 0.181972] NET: Registered PF_INET protocol family
339[ 0.182051] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
340[ 0.182608] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
341[ 0.182641] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
342[ 0.182673] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
343[ 0.182760] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
344[ 0.182791] TCP: Hash tables configured (established 32768 bind 32768)
345[ 0.182848] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
346[ 0.182872] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
347[ 0.182886] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
348[ 0.182918] NET: Registered PF_UNIX/PF_LOCAL protocol family
349[ 0.182922] NET: Registered PF_XDP protocol family
350[ 0.182931] pci 0000:00:01.0: PCI bridge to [bus 01]
351[ 0.182937] pci 0000:00:1c.0: PCI bridge to [bus 02]
352[ 0.182955] pci 0000:00:1c.4: PCI bridge to [bus 03]
353[ 0.182958] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
354[ 0.182964] pci 0000:00:1c.4: bridge window [mem 0x82a00000-0x82afffff 64bit pref]
355[ 0.182970] pci 0000:00:1e.0: PCI bridge to [bus 04]
356[ 0.182980] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
357[ 0.182981] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
358[ 0.182983] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000cbfff window]
359[ 0.182984] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000fffff window]
360[ 0.182985] pci_bus 0000:00: resource 8 [mem 0x82a00000-0xefffffff window]
361[ 0.182987] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window]
362[ 0.182988] pci_bus 0000:00: resource 10 [mem 0x17d600000-0xfffffffff window]
363[ 0.182989] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
364[ 0.182991] pci_bus 0000:03: resource 2 [mem 0x82a00000-0x82afffff 64bit pref]
365[ 0.182992] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
366[ 0.182993] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
367[ 0.182994] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000cbfff window]
368[ 0.182995] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000fffff window]
369[ 0.182997] pci_bus 0000:04: resource 8 [mem 0x82a00000-0xefffffff window]
370[ 0.182998] pci_bus 0000:04: resource 9 [mem 0xfed40000-0xfed44fff window]
371[ 0.182999] pci_bus 0000:04: resource 10 [mem 0x17d600000-0xfffffffff window]
372[ 0.183634] PCI: CLS 64 bytes, default 64
373[ 0.183641] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
374[ 0.183642] software IO TLB: mapped [mem 0x000000007bf28000-0x000000007ff28000] (64MB)
375[ 0.183692] Trying to unpack rootfs image as initramfs...
376[ 0.184325] Initialise system trusted keyrings
377[ 0.184343] Key type blacklist registered
378[ 0.184379] workingset: timestamp_bits=36 max_order=20 bucket_order=0
379[ 0.185362] zbud: loaded
380[ 0.185591] squashfs: version 4.0 (2009/01/31) Phillip Lougher
381[ 0.185768] fuse: init (API version 7.34)
382[ 0.185946] integrity: Platform Keyring initialized
383[ 0.194191] Key type asymmetric registered
384[ 0.194201] Asymmetric key parser 'x509' registered
385[ 0.194251] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
386[ 0.194308] io scheduler mq-deadline registered
387[ 0.196988] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
388[ 0.197278] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
389[ 0.197532] pcieport 0000:00:1c.4: PME: Signaling with IRQ 26
390[ 0.197651] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
391[ 0.198313] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
392[ 0.198352] ACPI: button: Power Button [PWRB]
393[ 0.198401] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
394[ 0.198448] ACPI: button: Power Button [PWRF]
395[ 0.200080] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
396[ 0.220637] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
397[ 0.241312] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
398[ 0.243119] Linux agpgart interface v0.103
399[ 0.248338] loop: module loaded
400[ 0.248723] tun: Universal TUN/TAP device driver, 1.6
401[ 0.248770] PPP generic driver version 2.4.2
402[ 0.248855] VFIO - User Level meta-driver version: 0.3
403[ 0.249021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
404[ 0.249024] ehci-pci: EHCI PCI platform driver
405[ 0.249255] ehci-pci 0000:00:1a.0: EHCI Host Controller
406[ 0.249266] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
407[ 0.249280] ehci-pci 0000:00:1a.0: debug port 2
408[ 0.253224] ehci-pci 0000:00:1a.0: irq 19, io mem 0x82b16000
409[ 0.267878] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
410[ 0.267951] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
411[ 0.267955] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
412[ 0.267958] usb usb1: Product: EHCI Host Controller
413[ 0.267960] usb usb1: Manufacturer: Linux 5.15.0-52-generic ehci_hcd
414[ 0.267962] usb usb1: SerialNumber: 0000:00:1a.0
415[ 0.268184] hub 1-0:1.0: USB hub found
416[ 0.268194] hub 1-0:1.0: 3 ports detected
417[ 0.268482] ehci-pci 0000:00:1d.0: EHCI Host Controller
418[ 0.268488] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
419[ 0.268500] ehci-pci 0000:00:1d.0: debug port 2
420[ 0.272412] ehci-pci 0000:00:1d.0: irq 18, io mem 0x82b17000
421[ 0.287894] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
422[ 0.288008] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
423[ 0.288013] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
424[ 0.288015] usb usb2: Product: EHCI Host Controller
425[ 0.288017] usb usb2: Manufacturer: Linux 5.15.0-52-generic ehci_hcd
426[ 0.288019] usb usb2: SerialNumber: 0000:00:1d.0
427[ 0.288273] hub 2-0:1.0: USB hub found
428[ 0.288285] hub 2-0:1.0: 3 ports detected
429[ 0.288487] ehci-platform: EHCI generic platform driver
430[ 0.288501] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
431[ 0.288506] ohci-pci: OHCI PCI platform driver
432[ 0.288523] ohci-platform: OHCI generic platform driver
433[ 0.288530] uhci_hcd: USB Universal Host Controller Interface driver
434[ 0.288577] i8042: PNP: No PS/2 controller found.
435[ 0.288578] i8042: Probing ports directly.
436[ 0.289072] serio: i8042 KBD port at 0x60,0x64 irq 1
437[ 0.289080] serio: i8042 AUX port at 0x60,0x64 irq 12
438[ 0.289296] mousedev: PS/2 mouse device common for all mice
439[ 0.289580] rtc_cmos 00:03: RTC can wake from S4
440[ 0.289791] rtc_cmos 00:03: registered as rtc0
441[ 0.289823] rtc_cmos 00:03: setting system clock to 2022-11-06T16:21:36 UTC (1667751696)
442[ 0.289843] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
443[ 0.289853] i2c_dev: i2c /dev entries driver
444[ 0.290022] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
445[ 0.290065] device-mapper: uevent: version 1.0.3
446[ 0.290140] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
447[ 0.290170] platform eisa.0: Probing EISA bus 0
448[ 0.290172] platform eisa.0: EISA: Cannot allocate resource for mainboard
449[ 0.290174] platform eisa.0: Cannot allocate resource for EISA slot 1
450[ 0.290175] platform eisa.0: Cannot allocate resource for EISA slot 2
451[ 0.290176] platform eisa.0: Cannot allocate resource for EISA slot 3
452[ 0.290177] platform eisa.0: Cannot allocate resource for EISA slot 4
453[ 0.290178] platform eisa.0: Cannot allocate resource for EISA slot 5
454[ 0.290179] platform eisa.0: Cannot allocate resource for EISA slot 6
455[ 0.290180] platform eisa.0: Cannot allocate resource for EISA slot 7
456[ 0.290181] platform eisa.0: Cannot allocate resource for EISA slot 8
457[ 0.290182] platform eisa.0: EISA: Detected 0 cards
458[ 0.290188] intel_pstate: Intel P-state driver initializing
459[ 0.290674] ledtrig-cpu: registered to indicate activity on CPUs
460[ 0.290716] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
461[ 0.290718] vesafb: scrolling: redraw
462[ 0.290719] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
463[ 0.290736] vesafb: framebuffer at 0x90000000, mapped to 0x0000000003ed1ebb, using 8128k, total 8128k
464[ 0.290779] fbcon: Deferring console take-over
465[ 0.290780] fb0: VESA VGA frame buffer device
466[ 0.290873] drop_monitor: Initializing network drop monitor service
467[ 0.291028] NET: Registered PF_INET6 protocol family
468[ 0.322496] Freeing initrd memory: 68172K
469[ 0.329148] Segment Routing with IPv6
470[ 0.329164] In-situ OAM (IOAM) with IPv6
471[ 0.329190] NET: Registered PF_PACKET protocol family
472[ 0.329428] Key type dns_resolver registered
473[ 0.330350] microcode: sig=0x306a9, pf=0x2, revision=0x21
474[ 0.330451] microcode: Microcode Update Driver: v2.2.
475[ 0.330457] IPI shorthand broadcast: enabled
476[ 0.330466] sched_clock: Marking stable (330293663, 154801)->(338487502, -8039038)
477[ 0.330771] registered taskstats version 1
478[ 0.330968] Loading compiled-in X.509 certificates
479[ 0.331567] Loaded X.509 cert 'Build time autogenerated kernel key: 0f7b019bb693b03ef7a18ddcd1f94e1a1ee0f5d4'
480[ 0.332104] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
481[ 0.332605] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
482[ 0.332606] blacklist: Loading compiled-in revocation X.509 certificates
483[ 0.332619] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
484[ 0.332874] zswap: loaded using pool lzo/zbud
485[ 0.333190] Key type ._fscrypt registered
486[ 0.333192] Key type .fscrypt registered
487[ 0.333193] Key type fscrypt-provisioning registered
488[ 0.335457] Key type encrypted registered
489[ 0.335460] AppArmor: AppArmor sha1 policy hashing enabled
490[ 0.335465] ima: No TPM chip found, activating TPM-bypass!
491[ 0.335467] Loading compiled-in module X.509 certificates
492[ 0.335998] Loaded X.509 cert 'Build time autogenerated kernel key: 0f7b019bb693b03ef7a18ddcd1f94e1a1ee0f5d4'
493[ 0.336000] ima: Allocated hash algorithm: sha1
494[ 0.336005] ima: No architecture policies found
495[ 0.336013] evm: Initialising EVM extended attributes:
496[ 0.336014] evm: security.selinux
497[ 0.336014] evm: security.SMACK64
498[ 0.336015] evm: security.SMACK64EXEC
499[ 0.336016] evm: security.SMACK64TRANSMUTE
500[ 0.336016] evm: security.SMACK64MMAP
501[ 0.336017] evm: security.apparmor
502[ 0.336017] evm: security.ima
503[ 0.336018] evm: security.capability
504[ 0.336018] evm: HMAC attrs: 0x1
505[ 0.336239] PM: Magic number: 14:2:388
506[ 0.336256] thermal cooling_device3: hash matches
507[ 0.336372] RAS: Correctable Errors collector initialized.
508[ 0.337593] Freeing unused decrypted memory: 2036K
509[ 0.338188] Freeing unused kernel image (initmem) memory: 3228K
510[ 0.367952] Write protecting the kernel read-only data: 30720k
511[ 0.368593] Freeing unused kernel image (text/rodata gap) memory: 2036K
512[ 0.368952] Freeing unused kernel image (rodata/data gap) memory: 1504K
513[ 0.408928] x86/mm: Checked W+X mappings: passed, no W+X pages found.
514[ 0.408930] x86/mm: Checking user space page tables
515[ 0.446591] x86/mm: Checked W+X mappings: passed, no W+X pages found.
516[ 0.446595] Run /init as init process
517[ 0.446596] with arguments:
518[ 0.446597] /init
519[ 0.446598] splash
520[ 0.446598] with environment:
521[ 0.446599] HOME=/
522[ 0.446600] TERM=linux
523[ 0.446600] BOOT_IMAGE=/boot/vmlinuz-5.15.0-52-generic
524[ 0.518930] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20210730/utaddress-204)
525[ 0.518940] ACPI: OSL: Resource conflict; ACPI support missing from driver?
526[ 0.518944] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20210730/utaddress-204)
527[ 0.518949] ACPI: OSL: Resource conflict; ACPI support missing from driver?
528[ 0.518951] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20210730/utaddress-204)
529[ 0.518956] ACPI: OSL: Resource conflict; ACPI support missing from driver?
530[ 0.518957] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20210730/utaddress-204)
531[ 0.518962] ACPI: OSL: Resource conflict; ACPI support missing from driver?
532[ 0.518963] lpc_ich: Resource conflict(s) found affecting gpio_ich
533[ 0.522723] ahci 0000:00:1f.2: version 3.0
534[ 0.523410] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
535[ 0.523447] xhci_hcd 0000:00:14.0: xHCI Host Controller
536[ 0.523606] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
537[ 0.524663] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
538[ 0.524671] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
539[ 0.525817] xhci_hcd 0000:00:14.0: xHCI Host Controller
540[ 0.525822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
541[ 0.525827] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
542[ 0.525859] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
543[ 0.525862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
544[ 0.525863] usb usb3: Product: xHCI Host Controller
545[ 0.525864] usb usb3: Manufacturer: Linux 5.15.0-52-generic xhci-hcd
546[ 0.525865] usb usb3: SerialNumber: 0000:00:14.0
547[ 0.528117] i2c i2c-0: 1/1 memory slots populated (from DMI)
548[ 0.529829] i2c i2c-0: Successfully instantiated SPD at 0x50
549[ 0.533577] hub 3-0:1.0: USB hub found
550[ 0.533601] hub 3-0:1.0: 4 ports detected
551[ 0.535360] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
552[ 0.535364] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
553[ 0.535365] usb usb4: Product: xHCI Host Controller
554[ 0.535366] usb usb4: Manufacturer: Linux 5.15.0-52-generic xhci-hcd
555[ 0.535367] usb usb4: SerialNumber: 0000:00:14.0
556[ 0.535440] hub 4-0:1.0: USB hub found
557[ 0.535449] hub 4-0:1.0: 4 ports detected
558[ 0.535873] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
559[ 0.535878] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
560[ 0.536486] scsi host0: ahci
561[ 0.536586] scsi host1: ahci
562[ 0.536710] scsi host2: ahci
563[ 0.536828] scsi host3: ahci
564[ 0.536952] scsi host4: ahci
565[ 0.537068] scsi host5: ahci
566[ 0.537117] ata1: SATA max UDMA/133 abar m2048@0x82b15000 port 0x82b15100 irq 27
567[ 0.537122] ata2: SATA max UDMA/133 abar m2048@0x82b15000 port 0x82b15180 irq 27
568[ 0.537125] ata3: SATA max UDMA/133 abar m2048@0x82b15000 port 0x82b15200 irq 27
569[ 0.537129] ata4: SATA max UDMA/133 abar m2048@0x82b15000 port 0x82b15280 irq 27
570[ 0.537132] ata5: SATA max UDMA/133 abar m2048@0x82b15000 port 0x82b15300 irq 27
571[ 0.537136] ata6: SATA max UDMA/133 abar m2048@0x82b15000 port 0x82b15380 irq 27
572[ 0.556171] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, 90:2b:34:13:b1:b8, XID 2c9, IRQ 29
573[ 0.556177] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
574[ 0.603863] usb 1-1: new high-speed USB device number 2 using ehci-pci
575[ 0.623863] usb 2-1: new high-speed USB device number 2 using ehci-pci
576[ 0.760546] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
577[ 0.760549] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
578[ 0.760728] hub 1-1:1.0: USB hub found
579[ 0.760819] hub 1-1:1.0: 6 ports detected
580[ 0.780557] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
581[ 0.780588] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
582[ 0.780759] hub 2-1:1.0: USB hub found
583[ 0.780857] hub 2-1:1.0: 6 ports detected
584[ 0.851871] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
585[ 0.852616] ata1.00: ATA-7: FUJITSU MHV2200BT PL, 0000004F, max UDMA/100
586[ 0.852870] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 32), AA
587[ 0.854145] ata1.00: configured for UDMA/100
588[ 0.854367] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 004F PQ: 0 ANSI: 5
589[ 0.854861] sd 0:0:0:0: Attached scsi generic sg0 type 0
590[ 0.854914] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
591[ 0.854935] sd 0:0:0:0: [sda] Write Protect is off
592[ 0.854937] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
593[ 0.854946] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
594[ 0.953322] sda: sda1 sda2
595[ 0.967954] sd 0:0:0:0: [sda] Attached SCSI disk
596[ 1.047862] usb 1-1.5: new low-speed USB device number 3 using ehci-pci
597[ 1.156934] ata2: SATA link down (SStatus 0 SControl 300)
598[ 1.161101] usb 1-1.5: New USB device found, idVendor=046a, idProduct=0023, bcdDevice= 0.20
599[ 1.161109] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
600[ 1.167695] hid: raw HID events driver (C) Jiri Kosina
601[ 1.211869] tsc: Refined TSC clocksource calibration: 3492.066 MHz
602[ 1.211882] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32560a6ac7e, max_idle_ns: 440795371154 ns
603[ 1.211931] clocksource: Switched to clocksource tsc
604[ 1.470382] ata3: SATA link down (SStatus 0 SControl 300)
605[ 1.782394] ata4: SATA link down (SStatus 0 SControl 300)
606[ 2.094394] ata5: SATA link down (SStatus 0 SControl 300)
607[ 2.406393] ata6: SATA link down (SStatus 0 SControl 300)
608[ 2.409382] r8169 0000:03:00.0 eno0: renamed from eth0
609[ 2.416547] usbcore: registered new interface driver usbhid
610[ 2.416550] usbhid: USB HID core driver
611[ 2.420721] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046A:0023.0001/input/input6
612[ 2.479984] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1.5/input0
613[ 2.480010] cherry 0003:046A:0023.0002: fixing up Cherry Cymotion report descriptor
614[ 2.480200] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046A:0023.0002/input/input7
615[ 2.540038] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.0-1.5/input1
616[ 2.974667] fbcon: Taking over console
617[ 2.974801] Console: switching to colour frame buffer device 240x67
618[ 3.089675] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
619[ 6.548437] systemd[1]: Inserted module 'autofs4'
620[ 6.894957] systemd[1]: systemd 245.4-4ubuntu3.18 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
621[ 6.911952] systemd[1]: Detected architecture x86-64.
622[ 6.942471] systemd[1]: Set hostname to <flashdisk>.
623[ 10.880426] systemd[1]: Created slice system-modprobe.slice.
624[ 10.880830] systemd[1]: Created slice User and Session Slice.
625[ 10.880947] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
626[ 10.881249] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
627[ 10.881310] systemd[1]: Reached target User and Group Name Lookups.
628[ 10.881331] systemd[1]: Reached target Remote File Systems.
629[ 10.881350] systemd[1]: Reached target Slices.
630[ 10.881546] systemd[1]: Listening on Syslog Socket.
631[ 10.897242] systemd[1]: Listening on fsck to fsckd communication Socket.
632[ 10.897369] systemd[1]: Listening on initctl Compatibility Named Pipe.
633[ 10.900301] systemd[1]: Listening on Journal Audit Socket.
634[ 10.900485] systemd[1]: Listening on Journal Socket (/dev/log).
635[ 10.900675] systemd[1]: Listening on Journal Socket.
636[ 10.900866] systemd[1]: Listening on udev Control Socket.
637[ 10.900982] systemd[1]: Listening on udev Kernel Socket.
638[ 10.902458] systemd[1]: Mounting Huge Pages File System...
639[ 10.903812] systemd[1]: Mounting POSIX Message Queue File System...
640[ 10.905021] systemd[1]: Mounting Kernel Debug File System...
641[ 10.906385] systemd[1]: Mounting Kernel Trace File System...
642[ 10.907762] systemd[1]: Starting Journal Service...
643[ 10.908556] systemd[1]: Starting Set the console keyboard layout...
644[ 10.909385] systemd[1]: Starting Create list of static device nodes for the current kernel...
645[ 10.910244] systemd[1]: Starting Load Kernel Module chromeos_pstore...
646[ 10.911025] systemd[1]: Starting Load Kernel Module drm...
647[ 10.912021] systemd[1]: Starting Load Kernel Module efi_pstore...
648[ 10.912964] systemd[1]: Starting Load Kernel Module pstore_blk...
649[ 10.913720] systemd[1]: Starting Load Kernel Module pstore_zone...
650[ 10.914702] systemd[1]: Starting Load Kernel Module ramoops...
651[ 11.001142] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
652[ 11.001217] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
653[ 11.287331] systemd[1]: Starting Load Kernel Modules...
654[ 11.288538] systemd[1]: Starting Remount Root and Kernel File Systems...
655[ 11.289588] systemd[1]: Starting udev Coldplug all Devices...
656[ 11.290396] systemd[1]: Starting Uncomplicated firewall...
657[ 11.292957] systemd[1]: Mounted Huge Pages File System.
658[ 11.293158] systemd[1]: Mounted POSIX Message Queue File System.
659[ 11.293336] systemd[1]: Mounted Kernel Debug File System.
660[ 11.293509] systemd[1]: Mounted Kernel Trace File System.
661[ 11.294316] systemd[1]: Finished Create list of static device nodes for the current kernel.
662[ 11.294826] systemd[1]: modprobe@pstore_zone.service: Succeeded.
663[ 11.295385] systemd[1]: Finished Load Kernel Module pstore_zone.
664[ 11.299698] systemd[1]: Started Journal Service.
665[ 11.767222] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
666[ 11.899660] lp: driver loaded but no devices found
667[ 11.973325] ppdev: user-space parallel port driver
668[ 12.019647] systemd-journald[306]: Received client request to flush runtime journal.
669[ 12.150389] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
670[ 12.285013] parport0: irq 7 detected
671[ 12.326407] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
672[ 12.380033] lp0: using parport0 (polling).
673[ 13.704413] loop0: detected capacity change from 0 to 8
674[ 13.704522] loop1: detected capacity change from 0 to 113296
675[ 13.724084] loop2: detected capacity change from 0 to 113832
676[ 13.740061] loop3: detected capacity change from 0 to 129424
677[ 13.939828] loop4: detected capacity change from 0 to 523400
678[ 13.984151] loop5: detected capacity change from 0 to 709280
679[ 13.984231] loop6: detected capacity change from 0 to 187776
680[ 14.000021] loop7: detected capacity change from 0 to 448512
681[ 14.024409] loop8: detected capacity change from 0 to 127160
682[ 14.024504] loop9: detected capacity change from 0 to 101960
683[ 14.048642] loop10: detected capacity change from 0 to 94056
684[ 14.357025] loop11: detected capacity change from 0 to 98280
685[ 16.665039] audit: type=1400 audit(1667751712.870:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=365 comm="apparmor_parser"
686[ 16.665051] audit: type=1400 audit(1667751712.870:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=365 comm="apparmor_parser"
687[ 16.670722] audit: type=1400 audit(1667751712.874:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=364 comm="apparmor_parser"
688[ 16.678149] audit: type=1400 audit(1667751712.882:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=366 comm="apparmor_parser"
689[ 16.683032] audit: type=1400 audit(1667751712.886:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=362 comm="apparmor_parser"
690[ 16.683043] audit: type=1400 audit(1667751712.886:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=362 comm="apparmor_parser"
691[ 16.683049] audit: type=1400 audit(1667751712.886:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=362 comm="apparmor_parser"
692[ 16.800857] audit: type=1400 audit(1667751713.006:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=368 comm="apparmor_parser"
693[ 16.898104] audit: type=1400 audit(1667751713.102:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=367 comm="apparmor_parser"
694[ 16.898121] audit: type=1400 audit(1667751713.102:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=367 comm="apparmor_parser"
695[ 21.527559] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
696[ 21.527565] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
697[ 21.527567] RAPL PMU: hw unit of domain package 2^-16 Joules
698[ 21.527569] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
699[ 21.817342] cryptd: max_cpu_qlen set to 1000
700[ 21.933198] at24 0-0050: supply vcc not found, using dummy regulator
701[ 21.933824] at24 0-0050: 256 byte spd EEPROM, read-only
702[ 22.687508] EDAC ie31200: No ECC support
703[ 24.208268] AVX version of gcm_enc/dec engaged.
704[ 24.208393] AES CTR mode by8 optimization enabled
705[ 24.539867] mei_me 0000:00:16.0: wait hw ready failed
706[ 24.539968] mei_me 0000:00:16.0: hw_start failed ret = -62
707[ 24.540082] mei_me 0000:00:16.0: H_RST is set = 0x80000015
708[ 26.555867] mei_me 0000:00:16.0: wait hw ready failed
709[ 26.555964] mei_me 0000:00:16.0: hw_start failed ret = -62
710[ 26.556075] mei_me 0000:00:16.0: H_RST is set = 0x80000015
711[ 28.571869] mei_me 0000:00:16.0: wait hw ready failed
712[ 28.571966] mei_me 0000:00:16.0: hw_start failed ret = -62
713[ 28.572068] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
714[ 28.572214] mei_me 0000:00:16.0: reset failed ret = -19
715[ 28.572301] mei_me 0000:00:16.0: link layer initialization failed.
716[ 28.572404] mei_me 0000:00:16.0: init hw failure.
717[ 28.572609] mei_me 0000:00:16.0: initialization failed.
718[ 33.085103] Console: switching to colour dummy device 80x25
719[ 33.085139] i915 0000:00:02.0: vgaarb: deactivate vga console
720[ 33.157905] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
721[ 33.275675] fbcon: i915drmfb (fb0) is primary device
722[ 33.375157] Console: switching to colour frame buffer device 240x67
723[ 33.399625] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
724[ 36.448618] intel_rapl_common: Found RAPL domain package
725[ 36.448625] intel_rapl_common: Found RAPL domain core
726[ 36.448627] intel_rapl_common: Found RAPL domain uncore
727[ 36.461996] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
728[ 37.350133] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
729[ 37.350139] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
730[ 37.350140] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
731[ 37.350142] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
732[ 37.350143] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
733[ 37.350144] snd_hda_codec_realtek hdaudioC0D2: inputs:
734[ 37.350145] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
735[ 37.350146] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
736[ 37.350147] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
737[ 37.350148] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
738[ 37.969015] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
739[ 37.969144] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
740[ 37.969223] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
741[ 37.969318] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
742[ 37.969398] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
743[ 37.969482] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
744[ 37.969558] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
745[ 37.969628] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
746[ 37.969707] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
747[ 37.969817] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
748[ 37.974091] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save denylist, forcing power_save to 0
749[ 45.614640] kauditd_printk_skb: 20 callbacks suppressed
750[ 45.614644] audit: type=1400 audit(1667751741.818:32): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=748 comm="cups-browsed" capability=23 capname="sys_nice"
751[ 47.805579] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
752[ 48.041879] r8169 0000:03:00.0 eno0: Link is Down
753[ 51.087822] r8169 0000:03:00.0 eno0: Link is Up - 1Gbps/Full - flow control rx/tx
754[ 51.087860] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
755[ 53.368755] loop12: detected capacity change from 0 to 8
756[ 1230.007462] traps: gdm3[769] trap int3 ip:7f6ea201b295 sp:7fff0da07c10 error:0 in libglib-2.0.so.0.6400.6[7f6ea1fdf000+84000]