Gitiles
Code Review Sign In
review.coreboot.org / board-status / HEAD / . / emulation / qemu-q35 / 4.4-431-g7d38faf / 2016-06-08T12_10_32Z / kernel_log.txt
blob: 88161cbbf8884112217c774a6ca50514b4144018 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: Emulation QEMU x86 q35/ich9/QEMU x86 q35/ich9, BIOS 4.3-1281-g7d38faf-dirty 06/08/2016
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
39[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
40[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1ee00000-0x1effffff]
42[ 0.000000] [mem 0x1ee00000-0x1effffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1edfffff]
44[ 0.000000] [mem 0x1c000000-0x1edfffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1ff9ffff]
49[ 0.000000] [mem 0x1f000000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
51[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f0c7000-0x1fe79fff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F09F0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB10E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFB2DC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB1280 001B38 (v01 CORE COREBOOT 00000002 INTL 20150619)
58[ 0.000000] ACPI: FACS 0x000000001FFB1240 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFB2EC0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: TCPA 0x000000001FFB2F00 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: APIC 0x000000001FFB2F40 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: HPET 0x000000001FFB2FA0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: Local APIC address 0xfee00000
64[ 0.000000] No NUMA configuration found
65[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
66[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
67[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
68[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
69[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
70[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e000000-ffff88001e7fffff] on node 0
71[ 0.000000] Zone ranges:
72[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
73[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
74[ 0.000000] Normal empty
75[ 0.000000] Movable zone start for each node
76[ 0.000000] Early memory node ranges
77[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
78[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
79[ 0.000000] On node 0 totalpages: 130878
80[ 0.000000] DMA zone: 56 pages used for memmap
81[ 0.000000] DMA zone: 21 pages reserved
82[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
83[ 0.000000] DMA32 zone: 1735 pages used for memmap
84[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
85[ 0.000000] ACPI: PM-Timer IO Port: 0x608
86[ 0.000000] ACPI: Local APIC address 0xfee00000
87[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
88[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
89[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
91[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
92[ 0.000000] ACPI: IRQ0 used by override.
93[ 0.000000] ACPI: IRQ2 used by override.
94[ 0.000000] ACPI: IRQ9 used by override.
95[ 0.000000] Using ACPI (MADT) for SMP configuration information
96[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
97[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
98[ 0.000000] nr_irqs_gsi: 40
99[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
101[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
102[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
103[ 0.000000] Booting paravirtualized kernel on KVM
104[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001ee00000 s80896 r8192 d21504 u2097152
106[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
107[ 0.000000] pcpu-alloc: [0] 0
108[ 0.000000] KVM setup async PF for cpu 0
109[ 0.000000] kvm-stealtime: cpu 0, msr 1ee0d080
110[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
111[ 0.000000] Policy zone: DMA32
112[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
113[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
114[ 0.000000] AGP: Checking aperture...
115[ 0.000000] AGP: No AGP bridge found
116[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[ 0.000000] Memory: 489580K/523512K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 33932K reserved)
119[ 0.000000] Hierarchical RCU implementation.
120[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
121[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
122[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
123[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
124[ 0.000000] Console: colour VGA+ 80x25
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 1600.018 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 3200.03 BogoMIPS (lpj=6400072)
129[ 0.009538] pid_max: default: 32768 minimum: 301
130[ 0.012023] ACPI: Core revision 20140424
131[ 0.016813] ACPI: All ACPI Tables successfully acquired
132[ 0.019699] Security Framework initialized
133[ 0.020022] AppArmor: AppArmor disabled by boot time parameter
134[ 0.024008] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.028101] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.032246] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.035822] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.036013] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.040356] Initializing cgroup subsys memory
140[ 0.044017] Initializing cgroup subsys devices
141[ 0.046288] Initializing cgroup subsys freezer
142[ 0.048013] Initializing cgroup subsys net_cls
143[ 0.052018] Initializing cgroup subsys blkio
144[ 0.054228] Initializing cgroup subsys perf_event
145[ 0.056011] Initializing cgroup subsys net_prio
146[ 0.058454] mce: CPU supports 10 MCE banks
147[ 0.060120] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
150[ 0.081257] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
151[ 0.093393] ftrace: allocating 21614 entries in 85 pages
152[ 0.110189] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.112005] smpboot: CPU0: AMD Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
154[ 0.120000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.120008] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.128149] x86: Booted up 1 node, 1 CPUs
157[ 0.130088] smpboot: Total of 1 processors activated (3200.03 BogoMIPS)
158[ 0.132647] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.136340] devtmpfs: initialized
160[ 0.146441] pinctrl core: initialized pinctrl subsystem
161[ 0.148147] NET: Registered protocol family 16
162[ 0.150577] cpuidle: using governor ladder
163[ 0.152018] cpuidle: using governor menu
164[ 0.154138] ACPI: bus type PCI registered
165[ 0.156006] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.160300] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.164007] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.168691] PCI: Using configuration type 1 for base access
169[ 0.173956] ACPI: Added _OSI(Module Device)
170[ 0.176007] ACPI: Added _OSI(Processor Device)
171[ 0.178179] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.180006] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.191884] ACPI: Interpreter enabled
174[ 0.192010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.197086] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.202653] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.206642] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.212006] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.216005] ACPI: (supports S0)
180[ 0.217581] ACPI: Using IOAPIC for interrupt routing
181[ 0.220066] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.229993] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.232013] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.236500] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.240232] PCI host bridge to bus 0000:00
186[ 0.242225] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.244007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.248007] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.252008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.255386] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.256096] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.260120] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.264008] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.270612] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.296007] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.296368] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.300007] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.306463] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.330476] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.332878] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.333878] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.336053] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.340637] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.366499] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.370472] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.376927] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.377446] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.378653] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.384288] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.389036] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.393577] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.397677] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.401541] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.408417] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.413449] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.417377] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.420455] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.423112] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.424455] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.428451] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.431097] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.432470] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.436458] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.439719] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.440230] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.443057] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.444006] vgaarb: loaded
228[ 0.445336] vgaarb: bridge control possible 0000:00:01.0
229[ 0.448122] PCI: Using ACPI for IRQ routing
230[ 0.606258] PCI: pci_cache_line_size set to 64 bytes
231[ 0.606502] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.606507] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
233[ 0.606833] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.608051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.612609] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.620081] Switched to clocksource kvm-clock
237[ 0.636777] pnp: PnP ACPI init
238[ 0.638367] ACPI: bus type PNP registered
239[ 0.640511] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.640639] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.640755] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.640994] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.641158] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.641888] pnp: PnP ACPI: found 5 devices
245[ 0.643899] ACPI: bus type PNP unregistered
246[ 0.654720] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.657809] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.657814] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.657819] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.657822] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.657877] NET: Registered protocol family 2
252[ 0.660377] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.663825] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.666978] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.670189] TCP: reno registered
256[ 0.671797] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.674681] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.677856] NET: Registered protocol family 1
259[ 0.680153] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.680266] PCI: CLS 64 bytes, default 64
261[ 0.680344] Unpacking initramfs...
262[ 1.206466] Freeing initrd memory: 14028K (ffff88001f0c7000 - ffff88001fe7a000)
263[ 1.210279] microcode: AMD CPU family 0x6 not supported
264[ 1.213331] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 1.216369] audit: initializing netlink subsys (disabled)
266[ 1.219059] audit: type=2000 audit(1465391283.593:1): initialized
267[ 1.222642] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 1.225793] zbud: loaded
269[ 1.227277] VFS: Disk quotas dquot_6.5.2
270[ 1.229252] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 1.232558] msgmni has been set to 983
272[ 1.234896] alg: No test for stdrng (krng)
273[ 1.237039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 1.240748] io scheduler noop registered
275[ 1.242708] io scheduler deadline registered
276[ 1.244969] io scheduler cfq registered (default)
277[ 1.247458] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 1.250331] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 1.253745] GHES: HEST is not enabled!
280[ 1.255774] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 1.300539] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 1.304910] Linux agpgart interface v0.103
283[ 1.307165] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 1.312700] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 1.315180] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 1.318037] mousedev: PS/2 mouse device common for all mice
287[ 1.321565] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 1.325953] rtc_cmos 00:00: RTC can wake from S4
289[ 1.329241] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 1.332779] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 1.336647] ledtrig-cpu: registered to indicate activity on CPUs
292[ 1.339784] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 1.343024] AMD IOMMUv2 functionality not available on this system
294[ 1.346285] TCP: cubic registered
295[ 1.347979] NET: Registered protocol family 10
296[ 1.350636] mip6: Mobile IPv6
297[ 1.352181] NET: Registered protocol family 17
298[ 1.354418] mpls_gso: MPLS GSO support
299[ 1.356737] registered taskstats version 1
300[ 1.359358] rtc_cmos 00:00: setting system clock to 2016-06-08 13:08:03 UTC (1465391283)
301[ 1.363447] PM: Hibernation image not present or could not be loaded.
302[ 1.366047] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
303[ 1.369940] Write protecting the kernel read-only data: 8192k
304[ 1.379414] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
305[ 1.384791] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 1.408271] systemd-udevd[52]: starting version 215
307[ 1.411239] random: systemd-udevd urandom read with 3 bits of entropy available
308[ 1.434118] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
309[ 1.437687] e1000: Copyright (c) 1999-2006 Intel Corporation.
310[ 1.451470] SCSI subsystem initialized
311[ 1.456635] Floppy drive(s): fd0 is 1.44M
312[ 1.466424] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
313[ 1.473129] FDC 0 is a S82078B
314[ 1.489538] libata version 3.00 loaded.
315[ 1.913509] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
316[ 1.916940] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
317[ 1.920204] ahci 0000:00:1f.2: version 3.0
318[ 1.920900] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
319[ 1.924113] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
320[ 1.926167] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
321[ 1.930272] ahci 0000:00:1f.2: flags: ncq only
322[ 1.935772] scsi0 : ahci
323[ 1.937334] scsi1 : ahci
324[ 1.938852] scsi2 : ahci
325[ 1.940453] scsi3 : ahci
326[ 1.941978] scsi4 : ahci
327[ 1.943509] scsi5 : ahci
328[ 1.945054] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
329[ 1.948722] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
330[ 1.952359] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
331[ 1.956000] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
332[ 1.959695] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
333[ 1.963417] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
334[ 2.208189] tsc: Refined TSC clocksource calibration: 1600.057 MHz
335[ 2.284437] ata1: SATA link down (SStatus 0 SControl 300)
336[ 2.287423] ata3: SATA link down (SStatus 0 SControl 300)
337[ 2.290062] ata5: SATA link down (SStatus 0 SControl 300)
338[ 2.292773] ata2: SATA link down (SStatus 0 SControl 300)
339[ 2.295355] ata4: SATA link down (SStatus 0 SControl 300)
340[ 2.297971] ata6: SATA link down (SStatus 0 SControl 300)
341[ 2.328788] FS-Cache: Loaded
342[ 2.336531] RPC: Registered named UNIX socket transport module.
343[ 2.338863] RPC: Registered udp transport module.
344[ 2.340827] RPC: Registered tcp transport module.
345[ 2.342671] RPC: Registered tcp NFSv4.1 backchannel transport module.
346[ 2.353732] FS-Cache: Netfs 'nfs' registered for caching
347[ 2.374754] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
348[ 4.373246] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
349[ 4.381192] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
350[ 4.595397] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
351[ 4.601787] systemd[1]: Detected virtualization 'kvm'.
352[ 4.604092] systemd[1]: Detected architecture 'x86-64'.
353[ 4.656079] systemd[1]: Inserted module 'autofs4'
354[ 4.660495] systemd[1]: Set hostname to <cb-test-tgt>.
355[ 5.032855] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
356[ 5.038622] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
357[ 5.045818] systemd[1]: Expecting device dev-ttyS0.device...
358[ 5.052267] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
359[ 5.056363] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
360[ 5.060330] systemd[1]: Starting Remote File Systems (Pre).
361[ 5.067400] systemd[1]: Reached target Remote File Systems (Pre).
362[ 5.070736] systemd[1]: Starting Encrypted Volumes.
363[ 5.077405] systemd[1]: Reached target Encrypted Volumes.
364[ 5.080277] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
365[ 5.090208] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
366[ 5.094955] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
367[ 5.099041] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
368[ 5.103019] systemd[1]: Starting Paths.
369[ 5.108625] systemd[1]: Reached target Paths.
370[ 5.110738] systemd[1]: Starting Swap.
371[ 5.116182] systemd[1]: Reached target Swap.
372[ 5.118317] systemd[1]: Starting Root Slice.
373[ 5.124287] systemd[1]: Created slice Root Slice.
374[ 5.126627] systemd[1]: Starting Delayed Shutdown Socket.
375[ 5.133659] systemd[1]: Listening on Delayed Shutdown Socket.
376[ 5.136691] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
377[ 5.145867] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
378[ 5.149450] systemd[1]: Starting Journal Socket (/dev/log).
379[ 5.157077] systemd[1]: Listening on Journal Socket (/dev/log).
380[ 5.160153] systemd[1]: Starting udev Kernel Socket.
381[ 5.166735] systemd[1]: Listening on udev Kernel Socket.
382[ 5.169563] systemd[1]: Starting udev Control Socket.
383[ 5.176449] systemd[1]: Listening on udev Control Socket.
384[ 5.179212] systemd[1]: Starting User and Session Slice.
385[ 5.186223] systemd[1]: Created slice User and Session Slice.
386[ 5.189171] systemd[1]: Starting Journal Socket.
387[ 5.195671] systemd[1]: Listening on Journal Socket.
388[ 5.198323] systemd[1]: Starting System Slice.
389[ 5.204627] systemd[1]: Created slice System Slice.
390[ 5.207157] systemd[1]: Starting Increase datagram queue length...
391[ 5.214526] systemd[1]: Starting udev Coldplug all Devices...
392[ 5.278378] systemd[1]: Starting Load Kernel Modules...
393[ 5.304903] systemd[1]: Started Set Up Additional Binary Formats.
394[ 5.307982] systemd[1]: Mounting Debug File System...
395[ 5.329475] systemd[1]: Starting Create list of required static device nodes for the current kernel...
396[ 5.358381] systemd[1]: Mounting POSIX Message Queue File System...
397[ 5.376864] systemd[1]: Mounting Huge Pages File System...
398[ 5.394104] systemd[1]: Starting system-getty.slice.
399[ 5.412220] systemd[1]: Created slice system-getty.slice.
400[ 5.414939] systemd[1]: Starting system-serial\x2dgetty.slice.
401[ 5.423412] systemd[1]: Created slice system-serial\x2dgetty.slice.
402[ 5.427103] systemd[1]: Starting Slices.
403[ 5.436004] systemd[1]: Reached target Slices.
404[ 5.438362] systemd[1]: Starting Remount Root and Kernel File Systems...
405[ 5.450950] systemd[1]: Mounted Huge Pages File System.
406[ 5.468985] systemd[1]: Mounted POSIX Message Queue File System.
407[ 5.477624] systemd[1]: Mounted Debug File System.
408[ 5.484596] systemd[1]: Started Increase datagram queue length.
409[ 5.493722] systemd[1]: Started Load Kernel Modules.
410[ 5.508392] systemd[1]: Started Create list of required static device nodes for the current kernel.
411[ 5.527125] systemd[1]: Started Remount Root and Kernel File Systems.
412[ 5.537782] systemd[1]: Started udev Coldplug all Devices.
413[ 5.606974] systemd[1]: Started Various fixups to make systemd work better on Debian.
414[ 5.610954] systemd[1]: Starting Load/Save Random Seed...
415[ 5.617696] systemd[1]: Starting Create Static Device Nodes in /dev...
416[ 5.632381] systemd[1]: Starting Apply Kernel Variables...
417[ 5.651889] systemd[1]: Mounted Configuration File System.
418[ 5.661422] systemd[1]: Mounted FUSE Control File System.
419[ 5.671501] systemd[1]: Starting Syslog Socket.
420[ 5.696093] systemd[1]: Listening on Syslog Socket.
421[ 5.699051] systemd[1]: Starting Sockets.
422[ 5.723021] systemd[1]: Reached target Sockets.
423[ 5.726595] systemd[1]: Starting Journal Service...
424[ 5.741634] systemd[1]: Started Journal Service.
425[ 5.887659] systemd-udevd[146]: starting version 215
426[ 6.329403] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
427[ 6.344326] ACPI: Power Button [PWRF]
428[ 6.377276] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
429[ 6.409700] i801_smbus 0000:00:1f.3: Enabling SMBus device
430[ 6.435677] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
431[ 6.467671] parport_pc 00:03: reported by Plug and Play ACPI
432[ 6.472564] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
433[ 6.480713] [drm] Initialized drm 1.1.0 20060810
434[ 6.498911] input: PC Speaker as /devices/platform/pcspkr/input/input3
435[ 6.640674] iTCO_vendor_support: vendor-support=0
436[ 6.650358] ppdev: user-space parallel port driver
437[ 6.669947] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
438[ 6.673244] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
439[ 6.676899] iTCO_wdt: timeout value out of range, using 30
440[ 6.683734] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
441[ 7.083537] Key type dns_resolver registered
442[ 7.112242] NFS: Registering the id_resolver key type
443[ 7.118177] Key type id_resolver registered
444[ 7.124239] Key type id_legacy registered
445[ 7.378519] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
446[ 7.448734] systemd-journald[145]: Received request to flush runtime journal from PID 1
447[ 7.476347] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
448[ 7.499320] random: nonblocking pool is initialized
449[ 37.833212] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****