Gitiles
Code Review Sign In
review.coreboot.org / board-status / HEAD / . / asus / p5qc / 4.13-3385-g3aa757d705 / 2021-04-22T22_50_37Z / kernel_log.txt
blob: 8c1981886e762a5d59d817daccb4b7c332d2a702 [file] [log] [blame]
Stefan Ott5d4998f2021-04-23 02:23:13 +0200[diff] [blame]1[ 0.000000] Linux version 5.10.27-rt36-greebo-multigpu (stefan@greebo) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1) #12 SMP PREEMPT_RT Wed Apr 14 19:14:28 CEST 2021
2[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.27-rt36-greebo-multigpu root=/dev/mapper/vg_greebo-parabola_root rw cryptdevice=/dev/disk/by-uuid/ca7da344-795a-4073-8e03-f8005f155cde:sda3_crypt quiet panic=5 console=ttyS0,115200n8 console=tty0 acpi_enforce_resources=lax radeon.si_support=0 amdgpu.si_support=1
3[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
4[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
5[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
6[ 0.000000] BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb50fff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000007fb51000-0x000000007fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000ffffffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
15[ 0.000000] NX (Execute Disable) protection: active
16[ 0.000000] SMBIOS 3.0 present.
17[ 0.000000] DMI: ASUS P5Q/P5Q, BIOS 4.13-3385-g3aa757d705 04/22/2021
18[ 0.000000] tsc: Fast TSC calibration using PIT
19[ 0.000000] tsc: Detected 3332.946 MHz processor
20[ 0.001124] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
21[ 0.001128] e820: remove [mem 0x000a0000-0x000fffff] usable
22[ 0.001133] last_pfn = 0x200000 max_arch_pfn = 0x400000000
23[ 0.001138] MTRR default type: uncachable
24[ 0.001139] MTRR fixed ranges enabled:
25[ 0.001140] 00000-9FFFF write-back
26[ 0.001141] A0000-BFFFF uncachable
27[ 0.001143] C0000-FFFFF write-back
28[ 0.001144] MTRR variable ranges enabled:
29[ 0.001145] 0 base 000000000 mask F80000000 write-back
30[ 0.001147] 1 base 07FC00000 mask FFFC00000 uncachable
31[ 0.001150] 2 base 080000000 mask FF0000000 write-combining
32[ 0.001152] 3 base 100000000 mask F00000000 write-back
33[ 0.001154] 4 disabled
34[ 0.001154] 5 disabled
35[ 0.001155] 6 disabled
36[ 0.003578] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
37[ 0.003924] last_pfn = 0x7fb51 max_arch_pfn = 0x400000000
38[ 0.004434] RAMDISK: [mem 0x3650d000-0x3727dfff]
39[ 0.004440] ACPI: Early table checksum verification disabled
40[ 0.004445] ACPI: RSDP 0x00000000000F6B90 000024 (v02 COREv4)
41[ 0.004451] ACPI: XSDT 0x000000007FB5B0E0 00004C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
42[ 0.004458] ACPI: FACP 0x000000007FB5D100 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925)
43[ 0.004465] ACPI: DSDT 0x000000007FB5B280 001E71 (v02 COREv4 COREBOOT 00000001 INTL 20200925)
44[ 0.004470] ACPI: FACS 0x000000007FB5B240 000040
45[ 0.004473] ACPI: FACS 0x000000007FB5B240 000040
46[ 0.004476] ACPI: SSDT 0x000000007FB5D220 00054C (v02 COREv4 COREBOOT 0000002A CORE 20200925)
47[ 0.004481] ACPI: MCFG 0x000000007FB5D770 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
48[ 0.004485] ACPI: APIC 0x000000007FB5D7B0 000068 (v03 COREv4 COREBOOT 00000000 CORE 20200925)
49[ 0.004489] ACPI: HPET 0x000000007FB5D820 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
50[ 0.004498] ACPI: Local APIC address 0xfee00000
51[ 0.004521] Zone ranges:
52[ 0.004522] DMA [mem 0x0000000000001000-0x0000000000ffffff]
53[ 0.004524] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
54[ 0.004526] Normal [mem 0x0000000100000000-0x00000001ffffffff]
55[ 0.004528] Movable zone start for each node
56[ 0.004529] Early memory node ranges
57[ 0.004529] node 0: [mem 0x0000000000001000-0x000000000009efff]
58[ 0.004531] node 0: [mem 0x0000000000100000-0x000000007fb50fff]
59[ 0.004533] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
60[ 0.004535] Initmem setup node 0 [mem 0x0000000000001000-0x00000001ffffffff]
61[ 0.004538] On node 0 totalpages: 1571567
62[ 0.004540] DMA zone: 64 pages used for memmap
63[ 0.004541] DMA zone: 21 pages reserved
64[ 0.004542] DMA zone: 3998 pages, LIFO batch:0
65[ 0.005003] DMA zone: 28770 pages in unavailable ranges
66[ 0.005005] DMA32 zone: 8110 pages used for memmap
67[ 0.005006] DMA32 zone: 518993 pages, LIFO batch:63
68[ 0.021111] DMA32 zone: 1199 pages in unavailable ranges
69[ 0.021113] Normal zone: 16384 pages used for memmap
70[ 0.021114] Normal zone: 1048576 pages, LIFO batch:63
71[ 0.059092] ACPI: PM-Timer IO Port: 0x508
72[ 0.059096] ACPI: Local APIC address 0xfee00000
73[ 0.059104] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
74[ 0.059106] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
75[ 0.059117] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
76[ 0.059121] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
77[ 0.059124] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
78[ 0.059126] ACPI: IRQ0 used by override.
79[ 0.059128] ACPI: IRQ9 used by override.
80[ 0.059130] Using ACPI (MADT) for SMP configuration information
81[ 0.059132] ACPI: HPET id: 0x8086a301 base: 0xfed00000
82[ 0.059137] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
83[ 0.059155] [mem 0x80000000-0xdfffffff] available for PCI devices
84[ 0.059160] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
85[ 0.069026] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
86[ 0.069988] percpu: Embedded 40 pages/cpu s124928 r8192 d30720 u1048576
87[ 0.069994] pcpu-alloc: s124928 r8192 d30720 u1048576 alloc=1*2097152
88[ 0.069998] pcpu-alloc: [0] 0 1
89[ 0.070018] Built 1 zonelists, mobility grouping on. Total pages: 1546988
90[ 0.070022] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.27-rt36-greebo-multigpu root=/dev/mapper/vg_greebo-parabola_root rw cryptdevice=/dev/disk/by-uuid/ca7da344-795a-4073-8e03-f8005f155cde:sda3_crypt quiet panic=5 console=ttyS0,115200n8 console=tty0 acpi_enforce_resources=lax radeon.si_support=0 amdgpu.si_support=1
91[ 0.073221] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
92[ 0.075064] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
93[ 0.075106] mem auto-init: stack:off, heap alloc:off, heap free:off
94[ 0.170512] Memory: 6064524K/6286268K available (14338K kernel code, 1162K rwdata, 4288K rodata, 900K init, 1788K bss, 221488K reserved, 0K cma-reserved)
95[ 0.170523] random: get_random_u64 called from __kmem_cache_create+0x1f/0x3d0 with crng_init=0
96[ 0.170676] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
97[ 0.170698] Kernel/User page tables isolation: enabled
98[ 0.170786] rcu: Preemptible hierarchical RCU implementation.
99[ 0.170787] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
100[ 0.170789] rcu: RCU priority boosting: priority 1 delay 500 ms.
101[ 0.170790] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads.
102[ 0.170791] No expedited grace period (rcu_normal_after_boot).
103[ 0.170792] Trampoline variant of Tasks RCU enabled.
104[ 0.170792] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
105[ 0.170793] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
106[ 0.170806] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
107[ 0.171147] spurious 8259A interrupt: IRQ7.
108[ 0.174810] Console: colour VGA+ 80x25
109[ 0.174813] printk: console [tty0] enabled
110[ 0.174832] printk: console [ttyS0] enabled
111[ 0.174838] ACPI: Core revision 20200925
112[ 0.174911] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
113[ 0.174928] APIC: Switch to symmetric I/O mode setup
114[ 0.175338] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
115[ 0.179929] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x300adf15c73, max_idle_ns: 440795290766 ns
116[ 0.179936] Calibrating delay loop (skipped), value calculated using timer frequency.. 6665.89 BogoMIPS (lpj=3332946)
117[ 0.179940] pid_max: default: 32768 minimum: 301
118[ 0.180050] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
119[ 0.180109] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
120[ 0.180414] mce: CPU0: Thermal monitoring enabled (TM2)
121[ 0.180418] process: using mwait in idle threads
122[ 0.180422] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
123[ 0.180424] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
124[ 0.180429] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
125[ 0.180432] Spectre V2 : Mitigation: Full generic retpoline
126[ 0.180433] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
127[ 0.180434] Speculative Store Bypass: Vulnerable
128[ 0.180437] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
129[ 0.180552] Freeing SMP alternatives memory: 36K
130[ 0.282756] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz (family: 0x6, model: 0x17, stepping: 0xa)
131[ 0.282933] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
132[ 0.282933] ... version: 2
133[ 0.282933] ... bit width: 40
134[ 0.282933] ... generic registers: 2
135[ 0.282933] ... value mask: 000000ffffffffff
136[ 0.282933] ... max period: 000000007fffffff
137[ 0.282933] ... fixed-purpose events: 3
138[ 0.282933] ... event mask: 0000000700000003
139[ 0.282933] rcu: Hierarchical SRCU implementation.
140[ 0.282933] smp: Bringing up secondary CPUs ...
141[ 0.282933] x86: Booting SMP configuration:
142[ 0.282933] .... node #0, CPUs: #1
143[ 0.284955] smp: Brought up 1 node, 2 CPUs
144[ 0.284959] smpboot: Max logical packages: 1
145[ 0.284961] smpboot: Total of 2 processors activated (13331.78 BogoMIPS)
146[ 0.286152] devtmpfs: initialized
147[ 0.287100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
148[ 0.287107] futex hash table entries: 512 (order: 4, 65536 bytes, linear)
149[ 0.287220] NET: Registered protocol family 16
150[ 0.287538] thermal_sys: Registered thermal governor 'step_wise'
151[ 0.287558] cpuidle: using governor menu
152[ 0.287558] ACPI: bus type PCI registered
153[ 0.287558] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
154[ 0.287558] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
155[ 0.287936] PCI: Using configuration type 1 for base access
156[ 0.294265] cryptd: max_cpu_qlen set to 1000
157[ 0.294982] ACPI: Added _OSI(Module Device)
158[ 0.294984] ACPI: Added _OSI(Processor Device)
159[ 0.294985] ACPI: Added _OSI(3.0 _SCP Extensions)
160[ 0.294986] ACPI: Added _OSI(Processor Aggregator Device)
161[ 0.294988] ACPI: Added _OSI(Linux-Dell-Video)
162[ 0.294989] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
163[ 0.294990] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
164[ 0.296410] ACPI: 2 ACPI AML tables successfully acquired and loaded
165[ 0.296761] ACPI: Interpreter enabled
166[ 0.296761] ACPI: (supports S0 S3 S5)
167[ 0.296761] ACPI: Using IOAPIC for interrupt routing
168[ 0.296761] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
169[ 0.301126] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
170[ 0.301133] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
171[ 0.301192] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
172[ 0.301292] PCI host bridge to bus 0000:00
173[ 0.301294] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
174[ 0.301297] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
175[ 0.301299] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
176[ 0.301301] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
177[ 0.301303] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
178[ 0.301305] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
179[ 0.301307] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
180[ 0.301309] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
181[ 0.301311] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
182[ 0.301313] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
183[ 0.301315] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
184[ 0.301317] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
185[ 0.301319] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
186[ 0.301321] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
187[ 0.301322] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
188[ 0.301325] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
189[ 0.301327] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
190[ 0.301329] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
191[ 0.301331] pci_bus 0000:00: root bus resource [bus 00-ff]
192[ 0.301345] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
193[ 0.301499] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
194[ 0.301543] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
195[ 0.301705] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
196[ 0.301745] pci 0000:00:1a.0: reg 0x20: [io 0x4000-0x401f]
197[ 0.301908] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
198[ 0.301956] pci 0000:00:1a.1: reg 0x20: [io 0x4020-0x403f]
199[ 0.302122] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
200[ 0.302161] pci 0000:00:1a.2: reg 0x20: [io 0x4040-0x405f]
201[ 0.302334] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
202[ 0.302351] pci 0000:00:1a.7: reg 0x10: [mem 0x90405000-0x904053ff]
203[ 0.302430] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
204[ 0.302571] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
205[ 0.302588] pci 0000:00:1b.0: reg 0x10: [mem 0x90400000-0x90403fff 64bit]
206[ 0.302662] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
207[ 0.302800] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
208[ 0.302875] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
209[ 0.303029] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
210[ 0.303103] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
211[ 0.303250] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
212[ 0.303327] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
213[ 0.303473] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
214[ 0.303550] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
215[ 0.303702] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
216[ 0.303741] pci 0000:00:1d.0: reg 0x20: [io 0x4060-0x407f]
217[ 0.303904] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
218[ 0.303951] pci 0000:00:1d.1: reg 0x20: [io 0x4080-0x409f]
219[ 0.304116] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
220[ 0.304154] pci 0000:00:1d.2: reg 0x20: [io 0x40a0-0x40bf]
221[ 0.304332] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
222[ 0.304349] pci 0000:00:1d.7: reg 0x10: [mem 0x90406000-0x904063ff]
223[ 0.304429] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
224[ 0.304565] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
225[ 0.304745] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
226[ 0.304821] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
227[ 0.304826] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
228[ 0.304830] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
229[ 0.304834] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 001f)
230[ 0.304992] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
231[ 0.305005] pci 0000:00:1f.2: reg 0x10: [io 0x40e0-0x40e7]
232[ 0.305013] pci 0000:00:1f.2: reg 0x14: [io 0x40f0-0x40f3]
233[ 0.305021] pci 0000:00:1f.2: reg 0x18: [io 0x40e8-0x40ef]
234[ 0.305028] pci 0000:00:1f.2: reg 0x1c: [io 0x40f4-0x40f7]
235[ 0.305035] pci 0000:00:1f.2: reg 0x20: [io 0x40c0-0x40df]
236[ 0.305043] pci 0000:00:1f.2: reg 0x24: [mem 0x90404000-0x904047ff]
237[ 0.305084] pci 0000:00:1f.2: PME# supported from D3hot
238[ 0.305213] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
239[ 0.305230] pci 0000:00:1f.3: reg 0x10: [mem 0x90407000-0x904070ff 64bit]
240[ 0.305249] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
241[ 0.305432] pci 0000:01:00.0: [1002:6811] type 00 class 0x030000
242[ 0.305449] pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
243[ 0.305461] pci 0000:01:00.0: reg 0x18: [mem 0x90000000-0x9003ffff 64bit]
244[ 0.305469] pci 0000:01:00.0: reg 0x20: [io 0x1000-0x10ff]
245[ 0.305483] pci 0000:01:00.0: reg 0x30: [mem 0x90040000-0x9005ffff pref]
246[ 0.305490] pci 0000:01:00.0: enabling Extended Tags
247[ 0.305551] pci 0000:01:00.0: supports D1 D2
248[ 0.305553] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
249[ 0.305575] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
250[ 0.305647] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
251[ 0.305664] pci 0000:01:00.1: reg 0x10: [mem 0x90060000-0x90063fff 64bit]
252[ 0.305700] pci 0000:01:00.1: enabling Extended Tags
253[ 0.305747] pci 0000:01:00.1: supports D1 D2
254[ 0.305884] pci 0000:00:01.0: PCI bridge to [bus 01]
255[ 0.305887] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
256[ 0.305890] pci 0000:00:01.0: bridge window [mem 0x90000000-0x900fffff]
257[ 0.305894] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
258[ 0.305942] pci 0000:00:1c.0: PCI bridge to [bus 02]
259[ 0.305992] pci 0000:00:1c.1: PCI bridge to [bus 03]
260[ 0.306062] pci 0000:04:00.0: [11ab:6121] type 00 class 0x01018f
261[ 0.306083] pci 0000:04:00.0: reg 0x10: [io 0x2010-0x2017]
262[ 0.306095] pci 0000:04:00.0: reg 0x14: [io 0x2020-0x2023]
263[ 0.306106] pci 0000:04:00.0: reg 0x18: [io 0x2018-0x201f]
264[ 0.306118] pci 0000:04:00.0: reg 0x1c: [io 0x2024-0x2027]
265[ 0.306129] pci 0000:04:00.0: reg 0x20: [io 0x2000-0x200f]
266[ 0.306141] pci 0000:04:00.0: reg 0x24: [mem 0x90100000-0x901003ff]
267[ 0.306215] pci 0000:04:00.0: supports D1
268[ 0.306217] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
269[ 0.306301] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
270[ 0.306311] pci 0000:00:1c.4: PCI bridge to [bus 04]
271[ 0.306315] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
272[ 0.306319] pci 0000:00:1c.4: bridge window [mem 0x90100000-0x901fffff]
273[ 0.306388] pci 0000:05:00.0: [1969:1026] type 00 class 0x020000
274[ 0.306415] pci 0000:05:00.0: reg 0x10: [mem 0x90200000-0x9023ffff 64bit]
275[ 0.306427] pci 0000:05:00.0: reg 0x18: [io 0x3000-0x307f]
276[ 0.306537] pci 0000:05:00.0: PME# supported from D3hot D3cold
277[ 0.306625] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
278[ 0.306636] pci 0000:00:1c.5: PCI bridge to [bus 05]
279[ 0.306640] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
280[ 0.306644] pci 0000:00:1c.5: bridge window [mem 0x90200000-0x902fffff]
281[ 0.306665] pci_bus 0000:06: extended config space not accessible
282[ 0.306696] pci 0000:06:01.0: [1102:0002] type 00 class 0x040100
283[ 0.306712] pci 0000:06:01.0: reg 0x10: [io 0x5100-0x511f]
284[ 0.306784] pci 0000:06:01.0: supports D1 D2
285[ 0.306882] pci 0000:06:01.1: [1102:7002] type 00 class 0x098000
286[ 0.306897] pci 0000:06:01.1: reg 0x10: [io 0x5120-0x5127]
287[ 0.306973] pci 0000:06:01.1: supports D1 D2
288[ 0.307047] pci 0000:06:02.0: [9004:5078] type 00 class 0x010000
289[ 0.307063] pci 0000:06:02.0: reg 0x10: [io 0x5000-0x50ff]
290[ 0.307074] pci 0000:06:02.0: reg 0x14: [mem 0x90300000-0x90300fff]
291[ 0.307237] pci 0000:06:03.0: [11c1:5811] type 00 class 0x0c0010
292[ 0.307254] pci 0000:06:03.0: reg 0x10: [mem 0x90301000-0x90301fff]
293[ 0.307326] pci 0000:06:03.0: supports D1 D2
294[ 0.307327] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot
295[ 0.307433] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
296[ 0.307437] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
297[ 0.307441] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
298[ 0.307447] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
299[ 0.307449] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
300[ 0.307452] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
301[ 0.307454] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
302[ 0.307456] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
303[ 0.307458] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
304[ 0.307460] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
305[ 0.307462] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
306[ 0.307465] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
307[ 0.307467] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
308[ 0.307469] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
309[ 0.307471] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
310[ 0.307473] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
311[ 0.307475] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
312[ 0.307478] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
313[ 0.307480] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
314[ 0.307482] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
315[ 0.307484] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
316[ 0.307511] pci_bus 0000:00: on NUMA node 0
317[ 0.307673] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
318[ 0.307745] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
319[ 0.307814] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
320[ 0.307883] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
321[ 0.307956] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
322[ 0.308025] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
323[ 0.308094] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
324[ 0.308162] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
325[ 0.308519] iommu: Default domain type: Translated
326[ 0.308612] SCSI subsystem initialized
327[ 0.308952] libata version 3.00 loaded.
328[ 0.308978] ACPI: bus type USB registered
329[ 0.308999] usbcore: registered new interface driver usbfs
330[ 0.309011] usbcore: registered new interface driver hub
331[ 0.309024] usbcore: registered new device driver usb
332[ 0.309069] Advanced Linux Sound Architecture Driver Initialized.
333[ 0.309069] PCI: Using ACPI for IRQ routing
334[ 0.314574] PCI: pci_cache_line_size set to 64 bytes
335[ 0.314653] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
336[ 0.314656] e820: reserve RAM buffer [mem 0x7fb51000-0x7fffffff]
337[ 0.315067] hpet: 4 channels of 0 reserved for per-cpu timers
338[ 0.315071] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
339[ 0.315077] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
340[ 0.316951] clocksource: Switched to clocksource tsc-early
341[ 0.317033] pnp: PnP ACPI init
342[ 0.317119] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
343[ 0.317124] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
344[ 0.317127] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
345[ 0.317130] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
346[ 0.317132] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
347[ 0.317135] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
348[ 0.317138] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
349[ 0.317141] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
350[ 0.317148] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
351[ 0.317434] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
352[ 0.317442] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
353[ 0.317518] system 00:02: [io 0x0800-0x080f] has been reserved
354[ 0.317521] system 00:02: [io 0x0500-0x057f] has been reserved
355[ 0.317524] system 00:02: [io 0x0580-0x05bf] has been reserved
356[ 0.317531] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
357[ 0.317559] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
358[ 0.317600] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
359[ 0.317639] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
360[ 0.317666] pnp: PnP ACPI: found 6 devices
361[ 0.324119] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
362[ 0.324162] NET: Registered protocol family 2
363[ 0.324306] tcp_listen_portaddr_hash hash table entries: 4096 (order: 6, 262144 bytes, linear)
364[ 0.324393] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
365[ 0.324570] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes, linear)
366[ 0.325904] TCP: Hash tables configured (established 65536 bind 65536)
367[ 0.325986] UDP hash table entries: 4096 (order: 7, 524288 bytes, linear)
368[ 0.326264] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes, linear)
369[ 0.326618] NET: Registered protocol family 1
370[ 0.326787] RPC: Registered named UNIX socket transport module.
371[ 0.326789] RPC: Registered udp transport module.
372[ 0.326790] RPC: Registered tcp transport module.
373[ 0.326791] RPC: Registered tcp NFSv4.1 backchannel transport module.
374[ 0.326824] pci 0000:00:01.0: PCI bridge to [bus 01]
375[ 0.326830] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
376[ 0.326834] pci 0000:00:01.0: bridge window [mem 0x90000000-0x900fffff]
377[ 0.326837] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
378[ 0.326841] pci 0000:00:1c.0: PCI bridge to [bus 02]
379[ 0.326851] pci 0000:00:1c.1: PCI bridge to [bus 03]
380[ 0.326861] pci 0000:00:1c.4: PCI bridge to [bus 04]
381[ 0.326864] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
382[ 0.326868] pci 0000:00:1c.4: bridge window [mem 0x90100000-0x901fffff]
383[ 0.326875] pci 0000:00:1c.5: PCI bridge to [bus 05]
384[ 0.326878] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
385[ 0.326882] pci 0000:00:1c.5: bridge window [mem 0x90200000-0x902fffff]
386[ 0.326890] pci 0000:00:1e.0: PCI bridge to [bus 06]
387[ 0.326893] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
388[ 0.326897] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
389[ 0.326905] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
390[ 0.326908] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
391[ 0.326910] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
392[ 0.326912] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
393[ 0.326914] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
394[ 0.326916] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
395[ 0.326918] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
396[ 0.326921] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
397[ 0.326923] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
398[ 0.326925] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
399[ 0.326927] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
400[ 0.326929] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
401[ 0.326931] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
402[ 0.326933] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
403[ 0.326935] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
404[ 0.326937] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
405[ 0.326939] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
406[ 0.326941] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
407[ 0.326944] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
408[ 0.326946] pci_bus 0000:01: resource 1 [mem 0x90000000-0x900fffff]
409[ 0.326948] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
410[ 0.326950] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
411[ 0.326952] pci_bus 0000:04: resource 1 [mem 0x90100000-0x901fffff]
412[ 0.326955] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
413[ 0.326957] pci_bus 0000:05: resource 1 [mem 0x90200000-0x902fffff]
414[ 0.326959] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
415[ 0.326961] pci_bus 0000:06: resource 1 [mem 0x90300000-0x903fffff]
416[ 0.326963] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
417[ 0.326965] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
418[ 0.326967] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
419[ 0.326969] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000c3fff window]
420[ 0.326971] pci_bus 0000:06: resource 8 [mem 0x000c4000-0x000c7fff window]
421[ 0.326973] pci_bus 0000:06: resource 9 [mem 0x000c8000-0x000cbfff window]
422[ 0.326975] pci_bus 0000:06: resource 10 [mem 0x000cc000-0x000cffff window]
423[ 0.326977] pci_bus 0000:06: resource 11 [mem 0x000d0000-0x000d3fff window]
424[ 0.326979] pci_bus 0000:06: resource 12 [mem 0x000d4000-0x000d7fff window]
425[ 0.326981] pci_bus 0000:06: resource 13 [mem 0x000d8000-0x000dbfff window]
426[ 0.326983] pci_bus 0000:06: resource 14 [mem 0x000dc000-0x000dffff window]
427[ 0.326985] pci_bus 0000:06: resource 15 [mem 0x000e0000-0x000e3fff window]
428[ 0.326987] pci_bus 0000:06: resource 16 [mem 0x000e4000-0x000e7fff window]
429[ 0.326989] pci_bus 0000:06: resource 17 [mem 0x000e8000-0x000ebfff window]
430[ 0.326991] pci_bus 0000:06: resource 18 [mem 0x000ec000-0x000effff window]
431[ 0.326993] pci_bus 0000:06: resource 19 [mem 0x000f0000-0x000fffff window]
432[ 0.326995] pci_bus 0000:06: resource 20 [mem 0x80000000-0xfebfffff window]
433[ 0.326997] pci_bus 0000:06: resource 21 [mem 0xfed40000-0xfed44fff window]
434[ 0.328859] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
435[ 0.328905] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
436[ 0.328966] PCI: CLS 64 bytes, default 64
437[ 0.329034] Unpacking initramfs...
438[ 0.522961] Freeing initrd memory: 13764K
439[ 0.522974] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
440[ 0.522975] software IO TLB: mapped [mem 0x000000007bb51000-0x000000007fb51000] (64MB)
441[ 0.523628] workingset: timestamp_bits=62 max_order=21 bucket_order=0
442[ 0.526598] NFS: Registering the id_resolver key type
443[ 0.526608] Key type id_resolver registered
444[ 0.526609] Key type id_legacy registered
445[ 0.526647] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
446[ 0.526651] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
447[ 0.526661] ntfs: driver 2.1.32 [Flags: R/W].
448[ 0.526850] SGI XFS with security attributes, no debug enabled
449[ 0.541150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
450[ 0.541153] io scheduler mq-deadline registered
451[ 0.541495] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
452[ 0.541770] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
453[ 0.542086] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
454[ 0.542363] pcieport 0000:00:1c.4: PME: Signaling with IRQ 27
455[ 0.542624] pcieport 0000:00:1c.5: PME: Signaling with IRQ 28
456[ 0.542894] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
457[ 0.546062] ACPI: Power Button [PWRF]
458[ 0.546134] tsc: Marking TSC unstable due to TSC halts in idle
459[ 0.546190] clocksource: Switched to clocksource hpet
460[ 0.546419] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
461[ 0.546523] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
462[ 0.547098] [drm] amdgpu kernel modesetting enabled.
463[ 0.547237] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6811 0x1043:0x2015 0x81).
464[ 0.547242] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
465[ 0.547250] [drm] register mmio base: 0x90000000
466[ 0.547251] [drm] register mmio size: 262144
467[ 0.547254] [drm] PCIE atomic ops is not supported
468[ 0.547258] [drm] add ip block number 0 <si_common>
469[ 0.547260] [drm] add ip block number 1 <gmc_v6_0>
470[ 0.547261] [drm] add ip block number 2 <si_ih>
471[ 0.547263] [drm] add ip block number 3 <gfx_v6_0>
472[ 0.547264] [drm] add ip block number 4 <si_dma>
473[ 0.547265] [drm] add ip block number 5 <si_dpm>
474[ 0.547267] [drm] add ip block number 6 <dce_v6_0>
475[ 0.547268] [drm] add ip block number 7 <uvd_v3_1>
476[ 0.574154] [drm] BIOS signature incorrect 53 7
477[ 0.574161] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
478[ 0.574166] caller pci_map_rom+0x79/0x1c0 mapping multiple BARs
479[ 0.574285] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR
480[ 0.574288] amdgpu: ATOM BIOS: 115-403PMI2-101
481[ 0.574504] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
482[ 0.574516] amdgpu 0000:01:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
483[ 0.574520] amdgpu 0000:01:00.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
484[ 0.574526] [drm] Detected VRAM RAM=2048M, BAR=256M
485[ 0.574528] [drm] RAM width 256bits GDDR5
486[ 0.574585] [TTM] Zone kernel: Available graphics memory: 3039290 KiB
487[ 0.574588] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
488[ 0.574590] [TTM] Initializing pool allocator
489[ 0.574596] [TTM] Initializing DMA pool allocator
490[ 0.574643] [drm] amdgpu: 2048M of VRAM memory ready
491[ 0.574647] [drm] amdgpu: 3072M of GTT memory ready.
492[ 0.574650] [drm] GART: num cpu pages 262144, num gpu pages 262144
493[ 0.575285] amdgpu 0000:01:00.0: amdgpu: PCIE GART of 1024M enabled (table at 0x000000F400900000).
494[ 0.575973] [drm] Internal thermal controller with fan control
495[ 0.575985] [drm] amdgpu: dpm initialized
496[ 0.576043] [drm] AMDGPU Display Connectors
497[ 0.576044] [drm] Connector 0:
498[ 0.576045] [drm] DP-1
499[ 0.576046] [drm] HPD4
500[ 0.576047] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
501[ 0.576050] [drm] Encoders:
502[ 0.576050] [drm] DFP1: INTERNAL_UNIPHY2
503[ 0.576052] [drm] Connector 1:
504[ 0.576052] [drm] HDMI-A-1
505[ 0.576053] [drm] HPD5
506[ 0.576054] [drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953
507[ 0.576056] [drm] Encoders:
508[ 0.576057] [drm] DFP2: INTERNAL_UNIPHY2
509[ 0.576058] [drm] Connector 2:
510[ 0.576059] [drm] DVI-I-1
511[ 0.576059] [drm] HPD6
512[ 0.576060] [drm] DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963
513[ 0.576062] [drm] Encoders:
514[ 0.576063] [drm] DFP3: INTERNAL_UNIPHY
515[ 0.576064] [drm] CRT1: INTERNAL_KLDSCP_DAC1
516[ 0.576065] [drm] Connector 3:
517[ 0.576066] [drm] DVI-D-1
518[ 0.576066] [drm] HPD1
519[ 0.576067] [drm] DDC: 0x195c 0x195c 0x195d 0x195d 0x195e 0x195e 0x195f 0x195f
520[ 0.576069] [drm] Encoders:
521[ 0.576070] [drm] DFP4: INTERNAL_UNIPHY1
522[ 0.576075] [drm] Found UVD firmware Version: 64.0 Family ID: 13
523[ 0.578206] [drm] PCIE gen 2 link speeds already enabled
524[ 1.112407] [drm] UVD initialized successfully.
525[ 1.112410] amdgpu 0000:01:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 5, active_cu_number 16
526[ 1.202435] [drm] fb mappable at 0x80D9F000
527[ 1.202437] [drm] vram apper at 0x80000000
528[ 1.202438] [drm] size 7680000
529[ 1.202439] [drm] fb depth is 24
530[ 1.202440] [drm] pitch is 6400
531[ 1.202520] fbcon: amdgpudrmfb (fb0) is primary device
532[ 1.428746] Console: switching to colour frame buffer device 200x75
533[ 1.434422] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device
534[ 1.740738] [drm] Initialized amdgpu 3.40.0 20150101 for 0000:01:00.0 on minor 0
535[ 1.743031] loop: module loaded
536[ 1.743111] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200925/utaddress-204)
537[ 1.743118] ACPI: This conflict may cause random problems and system instability
538[ 1.743119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
539[ 1.743124] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20200925/utaddress-204)
540[ 1.743128] ACPI: This conflict may cause random problems and system instability
541[ 1.743129] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
542[ 1.743130] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20200925/utaddress-204)
543[ 1.743134] ACPI: This conflict may cause random problems and system instability
544[ 1.743135] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
545[ 1.743352] gpio_ich gpio_ich.1.auto: GPIO from 451 to 511
546[ 1.744674] ahc_pci:6:2:0: Host Adapter Bios disabled. Using default SCSI device parameters
547[ 6.797951] scsi host0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
548 <Adaptec 2902/04/10/15/20C/30C SCSI adapter>
549 aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
550
551[ 8.636292] ahci 0000:00:1f.2: version 3.0
552[ 8.636490] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
553[ 8.636528] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
554[ 8.636533] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
555[ 8.637596] scsi host1: ahci
556[ 8.637789] scsi host2: ahci
557[ 8.637987] scsi host3: ahci
558[ 8.638169] scsi host4: ahci
559[ 8.638346] scsi host5: ahci
560[ 8.638525] scsi host6: ahci
561[ 8.638603] ata1: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404100 irq 30
562[ 8.638607] ata2: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404180 irq 30
563[ 8.638610] ata3: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404200 irq 30
564[ 8.638612] ata4: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404280 irq 30
565[ 8.638614] ata5: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404300 irq 30
566[ 8.638616] ata6: SATA max UDMA/133 abar m2048@0x90404000 port 0x90404380 irq 30
567[ 8.639292] scsi host7: pata_marvell
568[ 8.639457] scsi host8: pata_marvell
569[ 8.639512] ata7: PATA max UDMA/100 cmd 0x2010 ctl 0x2020 bmdma 0x2000 irq 16
570[ 8.639515] ata8: PATA max UDMA/133 cmd 0x2018 ctl 0x2024 bmdma 0x2008 irq 16
571[ 8.707987] firewire_ohci 0000:06:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
572[ 8.708019] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
573[ 8.708021] ehci-pci: EHCI PCI platform driver
574[ 8.708158] ehci-pci 0000:00:1a.7: EHCI Host Controller
575[ 8.708167] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
576[ 8.708181] ehci-pci 0000:00:1a.7: debug port 1
577[ 8.712090] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
578[ 8.712145] ehci-pci 0000:00:1a.7: irq 18, io mem 0x90405000
579[ 8.718950] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
580[ 8.719002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
581[ 8.719005] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
582[ 8.719008] usb usb1: Product: EHCI Host Controller
583[ 8.719010] usb usb1: Manufacturer: Linux 5.10.27-rt36-greebo-multigpu ehci_hcd
584[ 8.719012] usb usb1: SerialNumber: 0000:00:1a.7
585[ 8.719190] hub 1-0:1.0: USB hub found
586[ 8.719198] hub 1-0:1.0: 6 ports detected
587[ 8.719600] ehci-pci 0000:00:1d.7: EHCI Host Controller
588[ 8.719608] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
589[ 8.719619] ehci-pci 0000:00:1d.7: debug port 1
590[ 8.723534] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
591[ 8.723591] ehci-pci 0000:00:1d.7: irq 16, io mem 0x90406000
592[ 8.729954] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
593[ 8.730015] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
594[ 8.730019] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
595[ 8.730022] usb usb2: Product: EHCI Host Controller
596[ 8.730024] usb usb2: Manufacturer: Linux 5.10.27-rt36-greebo-multigpu ehci_hcd
597[ 8.730025] usb usb2: SerialNumber: 0000:00:1d.7
598[ 8.730172] hub 2-0:1.0: USB hub found
599[ 8.730180] hub 2-0:1.0: 6 ports detected
600[ 8.730469] uhci_hcd: USB Universal Host Controller Interface driver
601[ 8.730579] uhci_hcd 0000:00:1a.0: UHCI Host Controller
602[ 8.730586] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
603[ 8.730654] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004000
604[ 8.730713] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
605[ 8.730717] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
606[ 8.730719] usb usb3: Product: UHCI Host Controller
607[ 8.730721] usb usb3: Manufacturer: Linux 5.10.27-rt36-greebo-multigpu uhci_hcd
608[ 8.730723] usb usb3: SerialNumber: 0000:00:1a.0
609[ 8.730850] hub 3-0:1.0: USB hub found
610[ 8.730858] hub 3-0:1.0: 2 ports detected
611[ 8.731146] uhci_hcd 0000:00:1a.1: UHCI Host Controller
612[ 8.731153] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
613[ 8.731227] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004020
614[ 8.731285] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
615[ 8.731288] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
616[ 8.731291] usb usb4: Product: UHCI Host Controller
617[ 8.731293] usb usb4: Manufacturer: Linux 5.10.27-rt36-greebo-multigpu uhci_hcd
618[ 8.731294] usb usb4: SerialNumber: 0000:00:1a.1
619[ 8.731420] hub 4-0:1.0: USB hub found
620[ 8.731428] hub 4-0:1.0: 2 ports detected
621[ 8.731682] uhci_hcd 0000:00:1a.2: UHCI Host Controller
622[ 8.731689] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
623[ 8.731758] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00004040
624[ 8.731821] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
625[ 8.731825] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
626[ 8.731827] usb usb5: Product: UHCI Host Controller
627[ 8.731829] usb usb5: Manufacturer: Linux 5.10.27-rt36-greebo-multigpu uhci_hcd
628[ 8.731830] usb usb5: SerialNumber: 0000:00:1a.2
629[ 8.731974] hub 5-0:1.0: USB hub found
630[ 8.731982] hub 5-0:1.0: 2 ports detected
631[ 8.732232] uhci_hcd 0000:00:1d.0: UHCI Host Controller
632[ 8.732241] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
633[ 8.732305] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004060
634[ 8.732363] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
635[ 8.732366] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
636[ 8.732369] usb usb6: Product: UHCI Host Controller
637[ 8.732371] usb usb6: Manufacturer: Linux 5.10.27-rt36-greebo-multigpu uhci_hcd
638[ 8.732372] usb usb6: SerialNumber: 0000:00:1d.0
639[ 8.732498] hub 6-0:1.0: USB hub found
640[ 8.732506] hub 6-0:1.0: 2 ports detected
641[ 8.732765] uhci_hcd 0000:00:1d.1: UHCI Host Controller
642[ 8.732773] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
643[ 8.732840] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004080
644[ 8.732901] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
645[ 8.732904] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
646[ 8.732907] usb usb7: Product: UHCI Host Controller
647[ 8.732909] usb usb7: Manufacturer: Linux 5.10.27-rt36-greebo-multigpu uhci_hcd
648[ 8.732910] usb usb7: SerialNumber: 0000:00:1d.1
649[ 8.733052] hub 7-0:1.0: USB hub found
650[ 8.733062] hub 7-0:1.0: 2 ports detected
651[ 8.733318] uhci_hcd 0000:00:1d.2: UHCI Host Controller
652[ 8.733325] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
653[ 8.733389] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
654[ 8.733447] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
655[ 8.733451] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
656[ 8.733453] usb usb8: Product: UHCI Host Controller
657[ 8.733455] usb usb8: Manufacturer: Linux 5.10.27-rt36-greebo-multigpu uhci_hcd
658[ 8.733457] usb usb8: SerialNumber: 0000:00:1d.2
659[ 8.733582] hub 8-0:1.0: USB hub found
660[ 8.733590] hub 8-0:1.0: 2 ports detected
661[ 8.733833] usbcore: registered new interface driver uas
662[ 8.733868] usbcore: registered new interface driver usb-storage
663[ 8.733900] usbcore: registered new interface driver ftdi_sio
664[ 8.733907] usbserial: USB Serial support registered for FTDI USB Serial Device
665[ 8.733979] usbcore: registered new interface driver mct_u232
666[ 8.733985] usbserial: USB Serial support registered for MCT U232
667[ 8.734030] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
668[ 8.736714] serio: i8042 KBD port at 0x60,0x64 irq 1
669[ 8.736764] serio: i8042 AUX port at 0x60,0x64 irq 12
670[ 8.741009] mousedev: PS/2 mouse device common for all mice
671[ 8.741095] rtc_cmos 00:03: RTC can wake from S4
672[ 8.741355] rtc_cmos 00:03: registered as rtc0
673[ 8.741384] rtc_cmos 00:03: setting system clock to 2021-04-23T00:19:33 UTC (1619137173)
674[ 8.741410] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
675[ 8.741434] i2c /dev entries driver
676[ 8.741872] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
677[ 8.742762] w83627ehf: Found W83667HG chip at 0x290
678[ 8.743090] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
679[ 8.743114] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0560)
680[ 8.743203] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
681[ 8.743297] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
682[ 8.743315] hid: raw HID events driver (C) Jiri Kosina
683[ 8.743351] usbcore: registered new interface driver usbhid
684[ 8.743352] usbhid: USB HID core driver
685[ 8.754249] gameport gameport0: EMU10K1 is pci0000:06:01.1/gameport0, io 0x5120, speed 930kHz
686[ 8.759099] usbcore: registered new interface driver snd-usb-audio
687[ 8.759327] NET: Registered protocol family 10
688[ 8.761479] Segment Routing with IPv6
689[ 8.761504] NET: Registered protocol family 17
690[ 8.761530] Key type dns_resolver registered
691[ 8.761799] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
692[ 8.761809] microcode: Microcode Update Driver: v2.2.
693[ 8.761813] IPI shorthand broadcast: enabled
694[ 8.761895] printk: console [tty0]: printing thread started
695[ 8.761922] printk: console [ttyS0]: printing thread started
696[ 8.761930] registered taskstats version 1
697[ 8.762268] printk: console [netcon0]: printing thread started
698[ 8.762273] printk: console [netcon0] enabled
699[ 8.762274] netconsole: network logging started
700[ 8.762486] ALSA device list:
701[ 8.762487] #0: SB Live! 5.1 (rev.8, serial:0x80641102) at 0x5100, irq 17
702[ 8.947382] ata1: SATA link down (SStatus 0 SControl 300)
703[ 9.039945] usb 1-2: new high-speed USB device number 2 using ehci-pci
704[ 9.055955] usb 2-2: new high-speed USB device number 2 using ehci-pci
705[ 9.185646] usb 2-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
706[ 9.185651] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
707[ 9.185653] usb 2-2: Product: USB2.0 Hub
708[ 9.186064] hub 2-2:1.0: USB hub found
709[ 9.186397] hub 2-2:1.0: 2 ports detected
710[ 9.202076] usb 1-2: New USB device found, idVendor=0bda, idProduct=0321, bcdDevice=11.21
711[ 9.202080] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
712[ 9.202083] usb 1-2: Product: USB3.0 Card Reader
713[ 9.202084] usb 1-2: Manufacturer: Realtek
714[ 9.202086] usb 1-2: SerialNumber: 201312261010
715[ 9.208350] usb-storage 1-2:1.0: USB Mass Storage device detected
716[ 9.208484] scsi host9: usb-storage 1-2:1.0
717[ 9.215026] firewire_core 0000:06:03.0: created device fw0: GUID 001e8c00017d4026, S400
718[ 9.251249] ata2: SATA link down (SStatus 0 SControl 300)
719[ 9.295017] random: fast init done
720[ 9.301956] usb 2-5: new high-speed USB device number 3 using ehci-pci
721[ 9.431521] usb 2-5: New USB device found, idVendor=05e3, idProduct=0614, bcdDevice= 1.97
722[ 9.431526] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
723[ 9.431528] usb 2-5: Product: USB2.0 Hub Charger
724[ 9.431943] hub 2-5:1.0: USB hub found
725[ 9.432273] hub 2-5:1.0: 4 ports detected
726[ 9.555297] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
727[ 9.569945] ata3.00: ATA-8: KINGSTON SH103S3240G, 521ABBF0, max UDMA/133
728[ 9.569948] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
729[ 9.582207] ata3.00: configured for UDMA/133
730[ 9.582313] scsi 3:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
731[ 9.582661] sd 3:0:0:0: Attached scsi generic sg0 type 0
732[ 9.582731] sd 3:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
733[ 9.582747] sd 3:0:0:0: [sda] Write Protect is off
734[ 9.582750] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
735[ 9.582775] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
736[ 9.628127] sda: sda1 sda2 sda3
737[ 9.628380] sd 3:0:0:0: [sda] Attached SCSI disk
738[ 9.955395] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
739[ 9.957288] ata4.00: supports DRM functions and may not be fully accessible
740[ 9.957660] ata4.00: NCQ Send/Recv Log not supported
741[ 9.957662] ata4.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133
742[ 9.957664] ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
743[ 9.958248] ata4.00: supports DRM functions and may not be fully accessible
744[ 9.958612] ata4.00: NCQ Send/Recv Log not supported
745[ 9.959031] ata4.00: configured for UDMA/133
746[ 9.959103] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5
747[ 9.959619] sd 4:0:0:0: Attached scsi generic sg1 type 0
748[ 9.959703] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
749[ 9.959718] sd 4:0:0:0: [sdb] Write Protect is off
750[ 9.959720] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
751[ 9.959745] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
752[ 9.960323] sdb: sdb1 sdb2 sdb3
753[ 9.960703] sd 4:0:0:0: [sdb] Attached SCSI disk
754[ 10.264083] scsi 9:0:0:0: Direct-Access Generic- USB3.0 CRW-CF/MD 1.00 PQ: 0 ANSI: 4
755[ 10.264333] sd 9:0:0:0: Attached scsi generic sg2 type 0
756[ 10.267372] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
757[ 10.276459] scsi 9:0:0:1: Direct-Access Generic- USB3.0 CRW-SD 1.00 PQ: 0 ANSI: 4
758[ 10.276710] sd 9:0:0:1: Attached scsi generic sg3 type 0
759[ 10.281834] sd 9:0:0:0: [sdc] Attached SCSI removable disk
760[ 10.292459] scsi 9:0:0:2: Direct-Access Generic- USB3.0 CRW-MS 1.00 PQ: 0 ANSI: 4
761[ 10.292620] sd 9:0:0:2: Attached scsi generic sg4 type 0
762[ 10.297201] ata5.00: ATA-8: ST500LM021-1KJ152, 0003LIM1, max UDMA/133
763[ 10.297203] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
764[ 10.298332] sd 9:0:0:1: [sdd] Attached SCSI removable disk
765[ 10.302831] sd 9:0:0:2: [sde] Attached SCSI removable disk
766[ 10.336175] ata5.00: configured for UDMA/133
767[ 10.336229] scsi 5:0:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5
768[ 10.336545] sd 5:0:0:0: Attached scsi generic sg5 type 0
769[ 10.336572] sd 5:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB)
770[ 10.336574] sd 5:0:0:0: [sdf] 4096-byte physical blocks
771[ 10.336583] sd 5:0:0:0: [sdf] Write Protect is off
772[ 10.336584] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
773[ 10.336601] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
774[ 10.353946] usb 8-2: new full-speed USB device number 2 using uhci_hcd
775[ 10.390947] usb 2-5.2: new full-speed USB device number 5 using ehci-pci
776[ 10.471020] usb 2-5.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
777[ 10.472140] usb 2-5.2: New USB device found, idVendor=27b8, idProduct=01ed, bcdDevice= 0.02
778[ 10.472142] usb 2-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
779[ 10.472144] usb 2-5.2: Product: blink(1) mk2
780[ 10.472145] usb 2-5.2: Manufacturer: ThingM
781[ 10.472146] usb 2-5.2: SerialNumber: 200060D6
782[ 10.473793] hid-led 0003:27B8:01ED.0001: hidraw0: USB HID v1.01 Device [ThingM blink(1) mk2] on usb-0000:00:1d.7-5.2/input0
783[ 10.473856] hid-led 0003:27B8:01ED.0001: ThingM blink(1) initialized
784[ 10.523991] usb 8-2: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.02
785[ 10.523994] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
786[ 10.523995] usb 8-2: Product: Gaming Mouse G502
787[ 10.523996] usb 8-2: Manufacturer: Logitech
788[ 10.523997] usb 8-2: SerialNumber: 0B7A364B3738
789[ 10.533304] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:046D:C332.0002/input/input3
790[ 10.533379] hid-generic 0003:046D:C332.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:1d.2-2/input0
791[ 10.537721] input: Logitech Gaming Mouse G502 Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C332.0003/input/input4
792[ 10.537950] usb 2-5.3: new full-speed USB device number 6 using ehci-pci
793[ 10.589012] input: Logitech Gaming Mouse G502 Consumer Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C332.0003/input/input5
794[ 10.589058] input: Logitech Gaming Mouse G502 System Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C332.0003/input/input6
795[ 10.589145] hid-generic 0003:046D:C332.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:1d.2-2/input1
796[ 10.619515] usb 2-5.3: New USB device found, idVendor=1111, idProduct=1111, bcdDevice= 2.10
797[ 10.619518] usb 2-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
798[ 10.619519] usb 2-5.3: Product: Ergo Pro Keyboard
799[ 10.619520] usb 2-5.3: Manufacturer: Matias
800[ 10.621279] input: Matias Ergo Pro Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.0/0003:1111:1111.0004/input/input9
801[ 10.650006] sdf: sdf1
802[ 10.650172] sd 5:0:0:0: [sdf] Attached SCSI disk
803[ 10.673119] hid-generic 0003:1111:1111.0004: input,hidraw3: USB HID v1.00 Keyboard [Matias Ergo Pro Keyboard] on usb-0000:00:1d.7-5.3/input0
804[ 10.675166] input: Matias Ergo Pro Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.1/0003:1111:1111.0005/input/input10
805[ 10.727034] input: Matias Ergo Pro Keyboard System Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.1/0003:1111:1111.0005/input/input11
806[ 10.727111] hid-generic 0003:1111:1111.0005: input,hidraw4: USB HID v1.00 Device [Matias Ergo Pro Keyboard] on usb-0000:00:1d.7-5.3/input1
807[ 10.955381] ata6: SATA link down (SStatus 0 SControl 300)
808[ 11.121746] Freeing unused kernel image (initmem) memory: 900K
809[ 11.121768] Write protecting the kernel read-only data: 22528k
810[ 11.122584] Freeing unused kernel image (text/rodata gap) memory: 2044K
811[ 11.123242] Freeing unused kernel image (rodata/data gap) memory: 1856K
812[ 11.123291] Run /init as init process
813[ 11.123292] with arguments:
814[ 11.123293] /init
815[ 11.123293] with environment:
816[ 11.123294] HOME=/
817[ 11.123294] TERM=linux
818[ 11.123295] BOOT_IMAGE=/vmlinuz-5.10.27-rt36-greebo-multigpu
819[ 11.123295] cryptdevice=/dev/disk/by-uuid/ca7da344-795a-4073-8e03-f8005f155cde:sda3_crypt
820[ 11.131448] udevd[144]: starting version 3.2.9
821[ 11.131624] random: udevd: uninitialized urandom read (16 bytes read)
822[ 11.131665] random: udevd: uninitialized urandom read (16 bytes read)
823[ 11.131676] random: udevd: uninitialized urandom read (16 bytes read)
824[ 11.132801] udevd[145]: starting eudev-3.2.9
825[ 11.254176] md/raid1:md0: active with 2 out of 2 mirrors
826[ 11.254193] md0: detected capacity change from 0 to 1073676288
827[ 11.254840] md/raid1:md127: active with 2 out of 2 mirrors
828[ 11.254852] md127: detected capacity change from 0 to 64389906432
829[ 11.256151] md/raid1:md1: active with 2 out of 2 mirrors
830[ 11.270759] md1: detected capacity change from 0 to 160927055872
831[ 16.584907] random: crng init done
832[ 16.584910] random: 4 urandom warning(s) missed due to ratelimiting
833[ 26.075268] XFS (dm-1): Mounting V5 Filesystem
834[ 26.141411] XFS (dm-1): Ending clean mount
835[ 26.144612] xfs filesystem being mounted at /new_root supports timestamps until 2038 (0x7fffffff)
836[ 26.919278] udevd[679]: starting version 3.2.9
837[ 26.956164] udevd[679]: starting eudev-3.2.9
838[ 27.689432] XFS (dm-2): mounting with "discard" option, but the device does not support discard
839[ 27.689571] XFS (dm-2): Mounting V5 Filesystem
840[ 27.816196] XFS (dm-2): Ending clean mount
841[ 27.820399] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff)
842[ 27.820920] XFS (md0): Deprecated V4 format (crc=0) will not be supported after September 2030.
843[ 27.821068] XFS (md0): Mounting V4 Filesystem
844[ 27.972807] XFS (md0): Ending clean mount
845[ 27.972828] xfs filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
846[ 28.201290] elogind-daemon[1268]: New seat seat0.
847[ 28.202322] elogind-daemon[1268]: Watching system buttons on /dev/input/event0 (Power Button)
848[ 28.202413] elogind-daemon[1268]: Watching system buttons on /dev/input/event2 (Logitech Gaming Mouse G502 Keyboard)
849[ 28.202502] elogind-daemon[1268]: Watching system buttons on /dev/input/event3 (Logitech Gaming Mouse G502 Consumer Control)
850[ 28.202589] elogind-daemon[1268]: Watching system buttons on /dev/input/event4 (Logitech Gaming Mouse G502 System Control)
851[ 28.202676] elogind-daemon[1268]: Watching system buttons on /dev/input/event5 (Matias Ergo Pro Keyboard)
852[ 28.211079] elogind-daemon[1268]: Watching system buttons on /dev/input/event7 (Matias Ergo Pro Keyboard System Control)
853[ 29.249561] ATL1E 0000:05:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex>
854[ 29.249571] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
855[ 40.316118] hwmon hwmon2: fan1 low limit and alarm disabled
856[ 40.316219] hwmon hwmon2: fan4 low limit and alarm disabled
857[ 44.025428] elogind-daemon[1268]: New session c1 of user stefan.
858[ 60.273765] XFS (dm-3): Mounting V5 Filesystem
859[ 60.435387] XFS (dm-3): Ending clean mount
860[ 60.468956] xfs filesystem being mounted at /mnt/build supports timestamps until 2038 (0x7fffffff)
861[ 88.203225] elogind-daemon[1268]: New session c2 of user root.
862[ 88.255355] elogind-daemon[1268]: Removed session c2.
863[ 88.346173] elogind-daemon[1268]: New session c3 of user root.
864[ 88.401459] elogind-daemon[1268]: Removed session c3.
865[ 88.452926] elogind-daemon[1268]: New session c4 of user root.
866[ 88.505013] elogind-daemon[1268]: Removed session c4.
867[ 88.557175] elogind-daemon[1268]: New session c5 of user root.
868[ 88.613332] elogind-daemon[1268]: Removed session c5.
869[ 169.742294] elogind-daemon[1268]: New session c6 of user root.
870[ 169.793048] elogind-daemon[1268]: Removed session c6.
871[ 169.885868] elogind-daemon[1268]: New session c7 of user root.
872[ 169.938423] elogind-daemon[1268]: Removed session c7.
873[ 170.030425] elogind-daemon[1268]: New session c8 of user root.
874[ 170.082570] elogind-daemon[1268]: Removed session c8.
875[ 170.134678] elogind-daemon[1268]: New session c9 of user root.