Gitiles
Code Review Sign In
review.coreboot.org / board-status / HEAD / . / asus / kfsn4-dre / 4.2-347-g75cdfd1 / 2015-11-21T08:12:53Z / kernel_log.txt
blob: d592eace80cba7c178aab86c416d6f7c27ef2038 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-347-g75cdfd1-dirty 11/21/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7990 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7B08 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7B40 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B80 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CF8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [ttyS0] enabled
182[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
183[ 0.000000] hpet clockevent registered
184[ 0.000000] tsc: Fast TSC calibration using PIT
185[ 0.000000] tsc: Detected 1909.705 MHz processor
186[ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.41 BogoMIPS (lpj=7638820)
187[ 0.010795] pid_max: default: 32768 minimum: 301
188[ 0.015450] ACPI: Core revision 20140424
189[ 0.021801] ACPI: All ACPI Tables successfully acquired
190[ 0.027163] Security Framework initialized
191[ 0.031288] AppArmor: AppArmor disabled by boot time parameter
192[ 0.037123] Yama: disabled by default; enable with sysctl kernel.yama.*
193[ 0.044858] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
194[ 0.058140] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
195[ 0.067920] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
196[ 0.074826] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.082685] Initializing cgroup subsys memory
198[ 0.087064] Initializing cgroup subsys devices
199[ 0.091533] Initializing cgroup subsys freezer
200[ 0.095996] Initializing cgroup subsys net_cls
201[ 0.100454] Initializing cgroup subsys blkio
202[ 0.104741] Initializing cgroup subsys perf_event
203[ 0.109450] Initializing cgroup subsys net_prio
204[ 0.114029] tseg: 0000000000
205[ 0.114040] CPU: Physical Processor ID: 0
206[ 0.118069] CPU: Processor Core ID: 0
207[ 0.121757] mce: CPU supports 6 MCE banks
208[ 0.125787] LVT offset 0 assigned for vector 0xf9
209[ 0.130516] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
210Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
211tlb_flushall_shift: 6
212[ 0.145854] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
213[ 0.154860] ftrace: allocating 21601 entries in 85 pages
214[ 0.170249] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
215[ 0.215768] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
216[ 0.332520] Performance Events: AMD PMU driver.
217[ 0.337089] ... version: 0
218[ 0.341101] ... bit width: 48
219[ 0.345199] ... generic registers: 4
220[ 0.349211] ... value mask: 0000ffffffffffff
221[ 0.354521] ... max period: 00007fffffffffff
222[ 0.359841] ... fixed-purpose events: 0
223[ 0.363853] ... event mask: 000000000000000f
224[ 0.371778] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
225[ 0.379978] x86: Booting SMP configuration:
226[ 0.384170] .... node #0, CPUs: #1 #2 #3
227[ 0.428511] .... node #1, CPUs: #4 #5 #6 #7
228[ 0.581223] x86: Booted up 2 nodes, 8 CPUs
229[ 0.585525] smpboot: Total of 8 processors activated (30556.87 BogoMIPS)
230[ 0.598031] devtmpfs: initialized
231[ 0.609965] pinctrl core: initialized pinctrl subsystem
232[ 0.615358] NET: Registered protocol family 16
233[ 0.620016] cpuidle: using governor ladder
234[ 0.624121] cpuidle: using governor menu
235[ 0.628056] node 0 link 1: io port [1000, 3fff]
236[ 0.628059] TOM: 00000000c0000000 aka 3072M
237[ 0.632246] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
238[ 0.632250] node 0 link 1: mmio [fc000000, fc3fffff]
239[ 0.632254] node 0 link 1: mmio [f8000000, fbffffff]
240[ 0.632256] TOM2: 0000000180000000 aka 6144M
241[ 0.636535] bus: [bus 00-05] on node 0 link 1
242[ 0.636537] bus: 00 [io 0x0000-0xffff]
243[ 0.636539] bus: 00 [mem 0xd0000000-0xffffffff]
244[ 0.636540] bus: 00 [mem 0x180000000-0xfcffffffff]
245[ 0.636647] ACPI: bus type PCI registered
246[ 0.640660] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
247[ 0.647265] PCI: Using configuration type 1 for base access
248[ 0.652840] PCI: Using configuration type 1 for extended access
249[ 0.669349] ACPI: Added _OSI(Module Device)
250[ 0.673540] ACPI: Added _OSI(Processor Device)
251[ 0.677990] ACPI: Added _OSI(3.0 _SCP Extensions)
252[ 0.682703] ACPI: Added _OSI(Processor Aggregator Device)
253[ 0.691632] ACPI: Interpreter enabled
254[ 0.695313] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
255[ 0.704588] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
256[ 0.713843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
257[ 0.723114] ACPI: (supports S0 S1 S5)
258[ 0.726784] ACPI: Using IOAPIC for interrupt routing
259[ 0.731800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
260[ 0.759719] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
261[ 0.765907] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
262[ 0.774127] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
263[ 0.810862] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
264[ 0.820915] PCI host bridge to bus 0000:00
265[ 0.825024] pci_bus 0000:00: root bus resource [bus 00-05]
266[ 0.830515] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
267[ 0.836700] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
268[ 0.843580] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
269[ 0.850452] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
270[ 0.857329] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
271[ 0.863525] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
272[ 0.863716] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
273[ 0.863724] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
274[ 0.863846] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
275[ 0.863857] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
276[ 0.863882] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
277[ 0.863890] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
278[ 0.863933] pci 0000:00:01.1: PME# supported from D3hot D3cold
279[ 0.864038] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
280[ 0.864049] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
281[ 0.864075] pci 0000:00:02.0: supports D1 D2
282[ 0.864095] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
283[ 0.864157] pci 0000:00:02.0: System wakeup disabled by ACPI
284[ 0.869881] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
285[ 0.869894] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
286[ 0.869944] pci 0000:00:02.1: supports D1 D2
287[ 0.869954] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
288[ 0.870010] pci 0000:00:02.1: System wakeup disabled by ACPI
289[ 0.875736] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
290[ 0.875770] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
291[ 0.875791] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
292[ 0.882930] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
293[ 0.889462] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
294[ 0.896601] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
295[ 0.903239] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
296[ 0.903255] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
297[ 0.903260] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
298[ 0.903264] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
299[ 0.903269] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
300[ 0.903274] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
301[ 0.903279] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
302[ 0.903420] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
303[ 0.903431] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
304[ 0.903435] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
305[ 0.903440] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
306[ 0.903444] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
307[ 0.903449] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
308[ 0.903454] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
309[ 0.903598] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
310[ 0.903725] pci 0000:00:09.0: System wakeup disabled by ACPI
311[ 0.909448] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
312[ 0.909490] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
313[ 0.909539] pci 0000:00:0b.0: System wakeup disabled by ACPI
314[ 0.915263] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
315[ 0.915318] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.915366] pci 0000:00:0c.0: System wakeup disabled by ACPI
317[ 0.921089] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
318[ 0.921135] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.921185] pci 0000:00:0d.0: System wakeup disabled by ACPI
320[ 0.926907] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
321[ 0.926956] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.927012] pci 0000:00:0e.0: System wakeup disabled by ACPI
323[ 0.932743] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
324[ 0.932881] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
325[ 0.933038] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
326[ 0.933149] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
327[ 0.933279] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
328[ 0.933390] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
329[ 0.933528] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
330[ 0.933666] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
331[ 0.933788] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
332[ 0.933920] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
333[ 0.934108] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
334[ 0.934133] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
335[ 0.934147] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
336[ 0.934153] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
337[ 0.934201] pci 0000:01:04.0: supports D1 D2
338[ 0.934302] pci 0000:00:09.0: PCI bridge to [bus 01]
339[ 0.939280] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
340[ 0.939283] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
341[ 0.939286] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
342[ 0.939398] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
343[ 0.939445] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
344[ 0.939486] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref]
345[ 0.939569] pci 0000:02:00.0: PME# supported from D3hot D3cold
346[ 0.939644] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
347[ 0.949645] pci 0000:00:0b.0: PCI bridge to [bus 02]
348[ 0.954616] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
349[ 0.954724] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
350[ 0.954759] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
351[ 0.954862] pci 0000:03:00.0: PME# supported from D3hot D3cold
352[ 0.954955] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
353[ 0.964953] pci 0000:00:0c.0: PCI bridge to [bus 03]
354[ 0.969924] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
355[ 0.970000] pci 0000:00:0d.0: PCI bridge to [bus 04]
356[ 0.975047] pci 0000:00:0e.0: PCI bridge to [bus 05]
357[ 0.980047] pci_bus 0000:00: on NUMA node 0
358[ 0.980150] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
359[ 0.986314] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
360[ 0.992458] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
361[ 0.999766] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
362[ 1.007046] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
363[ 1.014362] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
364[ 1.021681] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
365[ 1.027824] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
366[ 1.033961] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
367[ 1.041307] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
368[ 1.048626] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
369[ 1.055940] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
370[ 1.062076] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
371[ 1.068230] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
372[ 1.075558] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
373[ 1.082859] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
374[ 1.090176] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
375[ 1.098724] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
376[ 1.105212] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
377[ 1.111692] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
378[ 1.118150] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
379[ 1.124881] ACPI: Enabled 1 GPEs in block 00 to 1F
380[ 1.130000] vgaarb: setting as boot device: PCI:0000:01:04.0
381[ 1.135666] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
382[ 1.143762] vgaarb: loaded
383[ 1.146477] vgaarb: bridge control possible 0000:01:04.0
384[ 1.151955] PCI: Using ACPI for IRQ routing
385[ 1.156150] PCI: pci_cache_line_size set to 64 bytes
386[ 1.156208] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
387[ 1.156211] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
388[ 1.156532] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
389[ 1.163583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
390[ 1.168646] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
391[ 1.177356] Switched to clocksource hpet
392[ 1.192898] pnp: PnP ACPI init
393[ 1.196010] ACPI: bus type PNP registered
394[ 1.200576] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
395[ 1.200656] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
396[ 1.200754] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
397[ 1.200832] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
398[ 1.200872] pnp 00:04: [dma 2]
399[ 1.200915] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
400[ 1.200937] pnp: PnP ACPI: found 5 devices
401[ 1.205041] ACPI: bus type PNP unregistered
402[ 1.217087] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window
403[ 1.227041] pci 0000:00:09.0: PCI bridge to [bus 01]
404[ 1.232009] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
405[ 1.238111] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
406[ 1.244899] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
407[ 1.252132] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
408[ 1.259362] pci 0000:00:0b.0: PCI bridge to [bus 02]
409[ 1.264333] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
410[ 1.271127] pci 0000:00:0c.0: PCI bridge to [bus 03]
411[ 1.276098] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
412[ 1.282894] pci 0000:00:0d.0: PCI bridge to [bus 04]
413[ 1.287868] pci 0000:00:0e.0: PCI bridge to [bus 05]
414[ 1.292840] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
415[ 1.292843] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
416[ 1.292845] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
417[ 1.292848] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
418[ 1.292851] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
419[ 1.292854] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
420[ 1.292856] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
421[ 1.292859] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
422[ 1.292862] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
423[ 1.292865] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
424[ 1.293004] NET: Registered protocol family 2
425[ 1.297890] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
426[ 1.305585] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
427[ 1.312923] TCP: Hash tables configured (established 65536 bind 65536)
428[ 1.319530] TCP: reno registered
429[ 1.322785] UDP hash table entries: 4096 (order: 5, 131072 bytes)
430[ 1.328999] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
431[ 1.335791] NET: Registered protocol family 1
432[ 1.340548] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
433[ 1.346638] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
434[ 1.352552] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.358097] pci 0000:00:00.0: Found enabled HT MSI Mapping
436[ 1.363606] pci 0000:00:0b.0: Found disabled HT MSI Mapping
437[ 1.369188] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.374731] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.380245] pci 0000:00:0c.0: Found disabled HT MSI Mapping
440[ 1.385831] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.391377] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.396887] pci 0000:00:0d.0: Found disabled HT MSI Mapping
443[ 1.402479] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.408039] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.413547] pci 0000:00:0e.0: Found disabled HT MSI Mapping
446[ 1.419121] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.424651] pci 0000:01:04.0: Video device with shadowed ROM
448[ 1.424660] PCI: CLS 64 bytes, default 64
449[ 1.424769] Unpacking initramfs...
450[ 1.657665] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
451[ 1.665526] PCI-DMA: Disabling AGP.
452[ 1.670609] PCI-DMA: aperture base @ b4000000 size 65536 KB
453[ 1.676190] PCI-DMA: using GART IOMMU.
454[ 1.679949] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
455[ 1.691976] platform rtc_cmos: registered platform RTC device (no PNP device found)
456[ 1.700160] microcode: CPU0: patch_level=0x01000084
457[ 1.705050] microcode: CPU1: patch_level=0x01000084
458[ 1.709952] microcode: CPU2: patch_level=0x01000084
459[ 1.714855] microcode: CPU3: patch_level=0x01000084
460[ 1.719758] microcode: CPU4: patch_level=0x01000084
461[ 1.724650] microcode: CPU5: patch_level=0x01000084
462[ 1.729551] microcode: CPU6: patch_level=0x01000084
463[ 1.734447] microcode: CPU7: patch_level=0x01000084
464[ 1.739434] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
465[ 1.748233] LVT offset 1 assigned for vector 0x400
466[ 1.753045] IBS: LVT offset 1 assigned
467[ 1.756834] perf: AMD IBS detected (0x00000007)
468[ 1.761987] futex hash table entries: 2048 (order: 5, 131072 bytes)
469[ 1.768370] audit: initializing netlink subsys (disabled)
470[ 1.773799] audit: type=2000 audit(1448097004.496:1): initialized
471[ 1.780678] HugeTLB registered 2 MB page size, pre-allocated 0 pages
472[ 1.787082] zbud: loaded
473[ 1.789983] VFS: Disk quotas dquot_6.5.2
474[ 1.793954] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
475[ 1.800499] msgmni has been set to 9945
476[ 1.804867] alg: No test for stdrng (krng)
477[ 1.809032] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
478[ 1.816530] io scheduler noop registered
479[ 1.820466] io scheduler deadline registered
480[ 1.824823] io scheduler cfq registered (default)
481[ 1.829744] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
482[ 1.829868] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
483[ 1.829994] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
484[ 1.830118] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
485[ 1.830278] aer 0000:00:0b.0:pcie02: service driver aer loaded
486[ 1.830307] aer 0000:00:0c.0:pcie02: service driver aer loaded
487[ 1.830332] aer 0000:00:0d.0:pcie02: service driver aer loaded
488[ 1.830359] aer 0000:00:0e.0:pcie02: service driver aer loaded
489[ 1.830378] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
490[ 1.837345] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
491[ 1.843871] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
492[ 1.843882] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
493[ 1.850845] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
494[ 1.857377] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
495[ 1.857388] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
496[ 1.864353] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
497[ 1.864364] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
498[ 1.871326] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
499[ 1.871354] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
500[ 1.876962] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
501[ 1.883698] GHES: HEST is not enabled!
502[ 1.887587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
503[ 1.914178] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
504[ 1.941860] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
505[ 1.949784] Linux agpgart interface v0.103
506[ 1.954095] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
507[ 1.964589] serio: i8042 KBD port at 0x60,0x64 irq 1
508[ 1.969583] serio: i8042 AUX port at 0x60,0x64 irq 12
509[ 1.974870] mousedev: PS/2 mouse device common for all mice
510[ 1.980541] rtc_cmos rtc_cmos: RTC can wake from S4
511[ 1.985659] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
512[ 1.992059] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
513[ 1.999918] ledtrig-cpu: registered to indicate activity on CPUs
514[ 2.006111] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
515[ 2.012556] AMD IOMMUv2 functionality not available on this system
516[ 2.018932] TCP: cubic registered
517[ 2.022413] NET: Registered protocol family 10
518[ 2.027272] mip6: Mobile IPv6
519[ 2.028636] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
520[ 2.038863] NET: Registered protocol family 17
521[ 2.043382] mpls_gso: MPLS GSO support
522[ 2.047949] registered taskstats version 1
523[ 2.052850] rtc_cmos rtc_cmos: setting system clock to 2015-11-21 09:10:06 UTC (1448097006)
524[ 2.061293] PM: Hibernation image not present or could not be loaded.
525[ 2.063098] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
526[ 2.070952] Write protecting the kernel read-only data: 8192k
527[ 2.080203] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
528[ 2.088795] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
529[ 2.112695] systemd-udevd[99]: starting version 215
530[ 2.118463] random: systemd-udevd urandom read with 4 bits of entropy available
531[ 2.149958] pps_core: LinuxPPS API ver. 1 registered
532[ 2.154989] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
533[ 2.164496] ACPI: bus type USB registered
534[ 2.168717] usbcore: registered new interface driver usbfs
535[ 2.168771] PTP clock support registered
536[ 2.178254] usbcore: registered new interface driver hub
537[ 2.183814] usbcore: registered new device driver usb
538[ 2.183909] tg3.c:v3.137 (May 11, 2014)
539[ 2.183921] tg3 0000:02:00.0: enabling device (0004 -> 0006)
540[ 2.184127] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
541[ 2.205223] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
542[ 2.212352] ehci-pci: EHCI PCI platform driver
543[ 2.217097] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
544[ 2.217162] ehci-pci 0000:00:02.1: EHCI Host Controller
545[ 2.217181] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
546[ 2.217201] ehci-pci 0000:00:02.1: debug port 1
547[ 2.217249] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
548[ 2.217277] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
549[ 2.229007] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
550[ 2.229069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
551[ 2.229071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
552[ 2.229073] usb usb1: Product: EHCI Host Controller
553[ 2.229074] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
554[ 2.229075] usb usb1: SerialNumber: 0000:00:02.1
555[ 2.229285] hub 1-0:1.0: USB hub found
556[ 2.229293] hub 1-0:1.0: 10 ports detected
557[ 2.289943] ohci-pci: OHCI PCI platform driver
558[ 2.294625] ohci-pci 0000:00:02.0: OHCI PCI host controller
559[ 2.300248] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
560[ 2.307703] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
561[ 2.320181] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
562[ 2.330447] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
563[ 2.340189] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
564[ 2.348020] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
565[ 2.354827] tg3 0000:03:00.0: enabling device (0004 -> 0006)
566[ 2.360699] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
567[ 2.370998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
568[ 2.377793] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
569[ 2.385012] usb usb2: Product: OHCI PCI host controller
570[ 2.390245] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
571[ 2.396345] usb usb2: SerialNumber: 0000:00:02.0
572[ 2.401169] hub 2-0:1.0: USB hub found
573[ 2.404933] hub 2-0:1.0: 10 ports detected
574[ 2.425338] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
575[ 2.435603] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
576[ 2.445339] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
577[ 2.453170] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
578[ 2.466532] FS-Cache: Loaded
579[ 2.473452] RPC: Registered named UNIX socket transport module.
580[ 2.480056] RPC: Registered udp transport module.
581[ 2.486136] RPC: Registered tcp transport module.
582[ 2.492226] RPC: Registered tcp NFSv4.1 backchannel transport module.
583[ 2.504620] FS-Cache: Netfs 'nfs' registered for caching
584[ 2.518811] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
585[ 2.564984] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
586[ 2.688843] tsc: Refined TSC clocksource calibration: 1909.786 MHz
587[ 3.692591] Switched to clocksource tsc
588[ 4.197223] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
589[ 4.203754] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
590[ 4.210639] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
591[ 5.020251] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
592[ 5.033944] systemd[1]: Detected architecture 'x86-64'.
593[ 5.255434] systemd[1]: Inserted module 'autofs4'
594[ 5.261446] systemd[1]: Set hostname to <cb-test-tgt>.
595[ 5.340134] random: nonblocking pool is initialized
596[ 5.502802] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
597[ 5.515529] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
598[ 5.530926] systemd[1]: Expecting device dev-ttyS0.device...
599[ 5.543992] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
600[ 5.551769] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
601[ 5.559371] systemd[1]: Starting Remote File Systems (Pre).
602[ 5.575900] systemd[1]: Reached target Remote File Systems (Pre).
603[ 5.582028] systemd[1]: Starting Encrypted Volumes.
604[ 5.595872] systemd[1]: Reached target Encrypted Volumes.
605[ 5.601336] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
606[ 5.623865] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
607[ 5.633290] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 5.641354] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 5.649288] systemd[1]: Starting Paths.
610[ 5.663849] systemd[1]: Reached target Paths.
611[ 5.668245] systemd[1]: Starting Swap.
612[ 5.679836] systemd[1]: Reached target Swap.
613[ 5.684125] systemd[1]: Starting Root Slice.
614[ 5.695849] systemd[1]: Created slice Root Slice.
615[ 5.700579] systemd[1]: Starting User and Session Slice.
616[ 5.715831] systemd[1]: Created slice User and Session Slice.
617[ 5.721598] systemd[1]: Starting Delayed Shutdown Socket.
618[ 5.735823] systemd[1]: Listening on Delayed Shutdown Socket.
619[ 5.741599] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
620[ 5.759835] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
621[ 5.766815] systemd[1]: Starting Journal Socket (/dev/log).
622[ 5.783809] systemd[1]: Listening on Journal Socket (/dev/log).
623[ 5.789758] systemd[1]: Starting udev Kernel Socket.
624[ 5.803889] systemd[1]: Listening on udev Kernel Socket.
625[ 5.809290] systemd[1]: Starting udev Control Socket.
626[ 5.823784] systemd[1]: Listening on udev Control Socket.
627[ 5.829227] systemd[1]: Starting Journal Socket.
628[ 5.843786] systemd[1]: Listening on Journal Socket.
629[ 5.848804] systemd[1]: Starting System Slice.
630[ 5.863769] systemd[1]: Created slice System Slice.
631[ 5.868673] systemd[1]: Starting system-getty.slice.
632[ 5.883779] systemd[1]: Created slice system-getty.slice.
633[ 5.889197] systemd[1]: Starting system-serial\x2dgetty.slice.
634[ 5.903792] systemd[1]: Created slice system-serial\x2dgetty.slice.
635[ 5.910099] systemd[1]: Starting Increase datagram queue length...
636[ 5.928748] systemd[1]: Starting udev Coldplug all Devices...
637[ 6.172287] systemd[1]: Starting Load Kernel Modules...
638[ 6.194924] systemd[1]: Started Set Up Additional Binary Formats.
639[ 6.201244] systemd[1]: Mounting Debug File System...
640[ 6.217598] systemd[1]: Starting Create list of required static device nodes for the current kernel...
641[ 6.241677] systemd[1]: Mounting POSIX Message Queue File System...
642[ 6.260933] systemd[1]: Mounting Huge Pages File System...
643[ 6.277294] systemd[1]: Starting Slices.
644[ 6.291693] systemd[1]: Reached target Slices.
645[ 6.296225] systemd[1]: Starting Remount Root and Kernel File Systems...
646[ 6.323660] systemd[1]: Mounted Huge Pages File System.
647[ 6.339677] systemd[1]: Mounted POSIX Message Queue File System.
648[ 6.355677] systemd[1]: Mounted Debug File System.
649[ 6.371649] systemd[1]: Started Increase datagram queue length.
650[ 6.387668] systemd[1]: Started Load Kernel Modules.
651[ 6.407644] systemd[1]: Started Create list of required static device nodes for the current kernel.
652[ 6.427639] systemd[1]: Started Remount Root and Kernel File Systems.
653[ 6.443575] systemd[1]: Started udev Coldplug all Devices.
654[ 6.489228] systemd[1]: Started Various fixups to make systemd work better on Debian.
655[ 6.497094] systemd[1]: Starting Load/Save Random Seed...
656[ 6.513285] systemd[1]: Starting Create Static Device Nodes in /dev...
657[ 6.537126] systemd[1]: Starting Apply Kernel Variables...
658[ 6.553153] systemd[1]: Mounted Configuration File System.
659[ 6.558745] systemd[1]: Mounted FUSE Control File System.
660[ 6.564307] systemd[1]: Starting Syslog Socket.
661[ 6.579616] systemd[1]: Listening on Syslog Socket.
662[ 6.584618] systemd[1]: Starting Sockets.
663[ 6.599584] systemd[1]: Reached target Sockets.
664[ 6.604310] systemd[1]: Starting Journal Service...
665[ 6.631581] systemd[1]: Started Journal Service.
666[ 6.764927] systemd-udevd[190]: starting version 215
667[ 7.032127] systemd-journald[188]: Received request to flush runtime journal from PID 1
668[ 7.478309] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
669[ 7.490313] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
670[ 7.498121] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
671[ 7.506603] EDAC MC: Ver: 3.0.0
672[ 7.506755] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
673[ 7.506762] ACPI: Power Button [PWRB]
674[ 7.506844] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
675[ 7.506846] ACPI: Power Button [PWRF]
676[ 7.572379] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
677[ 7.577572] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
678[ 7.583207] FDC 0 is a post-1991 82077
679[ 7.608420] SCSI subsystem initialized
680[ 7.612549] MCE: In-kernel MCE decoding enabled.
681[ 7.617782] acpi-cpufreq: overriding BIOS provided _PSD data
682[ 7.624641] input: PC Speaker as /devices/platform/pcspkr/input/input4
683[ 7.653986] libata version 3.00 loaded.
684[ 7.657300] AMD64 EDAC driver v3.4.0
685[ 7.661030] EDAC amd64: DRAM ECC enabled.
686[ 7.665066] EDAC amd64: F10h detected (node 0).
687[ 7.669629] EDAC MC: DCT0 chip selects:
688[ 7.669632] EDAC amd64: MC: 0: 0MB 1: 0MB
689[ 7.674342] EDAC amd64: MC: 2: 0MB 3: 0MB
690[ 7.679054] EDAC amd64: MC: 4: 0MB 5: 0MB
691[ 7.683767] EDAC amd64: MC: 6: 1024MB 7: 1024MB
692[ 7.688479] EDAC MC: DCT1 chip selects:
693[ 7.688481] EDAC amd64: MC: 0: 0MB 1: 0MB
694[ 7.693193] EDAC amd64: MC: 2: 0MB 3: 0MB
695[ 7.697895] EDAC amd64: MC: 4: 0MB 5: 0MB
696[ 7.702600] EDAC amd64: MC: 6: 1024MB 7: 1024MB
697[ 7.707313] EDAC amd64: using x4 syndromes.
698[ 7.711506] EDAC amd64: MCT channel count: 2
699[ 7.715867] EDAC amd64: CS6: Registered DDR2 RAM
700[ 7.720524] EDAC amd64: CS7: Registered DDR2 RAM
701[ 7.726049] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
702[ 7.735951] EDAC amd64: DRAM ECC enabled.
703[ 7.742004] EDAC amd64: F10h detected (node 1).
704[ 7.746682] EDAC MC: DCT0 chip selects:
705[ 7.746685] EDAC amd64: MC: 0: 1024MB 1: 0MB
706[ 7.751467] EDAC amd64: MC: 2: 0MB 3: 0MB
707[ 7.756224] EDAC amd64: MC: 4: 0MB 5: 0MB
708[ 7.760976] EDAC amd64: MC: 6: 0MB 7: 0MB
709[ 7.765631] EDAC MC: DCT1 chip selects:
710[ 7.765633] EDAC amd64: MC: 0: 0MB 1: 0MB
711[ 7.770377] EDAC amd64: MC: 2: 0MB 3: 0MB
712[ 7.775134] EDAC amd64: MC: 4: 0MB 5: 0MB
713[ 7.779878] EDAC amd64: MC: 6: 0MB 7: 0MB
714[ 7.784673] EDAC amd64: using x4 syndromes.
715[ 7.784803] kvm: Nested Virtualization enabled
716[ 7.784808] kvm: Nested Paging enabled
717[ 7.797068] EDAC amd64: MCT channel count: 1
718[ 7.802695] EDAC amd64: CS0: Registered DDR2 RAM
719[ 7.807727] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
720[ 7.818588] pata_amd 0000:00:06.0: version 0.4.1
721[ 7.818634] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
722[ 7.819541] scsi0 : pata_amd
723[ 7.833429] scsi1 : pata_amd
724[ 7.836403] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
725[ 7.843367] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
726[ 7.850396] sata_nv 0000:00:07.0: version 3.5
727[ 7.850778] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
728[ 7.857275] scsi2 : sata_nv
729[ 7.860343] scsi3 : sata_nv
730[ 7.863264] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
731[ 7.870431] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
732[ 7.877791] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
733[ 7.884000] scsi4 : sata_nv
734[ 7.886998] scsi5 : sata_nv
735[ 7.890046] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
736[ 7.897184] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
737[ 8.186952] ata3: SATA link down (SStatus 0 SControl 300)
738[ 8.214938] ata5: SATA link down (SStatus 0 SControl 300)
739[ 8.502867] ata4: SATA link down (SStatus 0 SControl 300)
740[ 8.818736] ata6: SATA link down (SStatus 0 SControl 300)
741[ 38.625500] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****