Gitiles
Code Review Sign In
review.coreboot.org / board-status / HEAD / . / asus / kfsn4-dre / 4.1-657-g8b29322 / 2015-10-01T13:49:57Z / kernel_log.txt
blob: b556abc95f66b7a416ba4c402d8e7c64c63cc4d8 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-657-g8b29322-dirty 10/01/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [ttyS0] enabled
182[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
183[ 0.000000] hpet clockevent registered
184[ 0.000000] tsc: Fast TSC calibration using PIT
185[ 0.000000] tsc: Detected 1909.795 MHz processor
186[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.59 BogoMIPS (lpj=7639180)
187[ 0.010795] pid_max: default: 32768 minimum: 301
188[ 0.015451] ACPI: Core revision 20140424
189[ 0.021794] ACPI: All ACPI Tables successfully acquired
190[ 0.027146] Security Framework initialized
191[ 0.031270] AppArmor: AppArmor disabled by boot time parameter
192[ 0.037107] Yama: disabled by default; enable with sysctl kernel.yama.*
193[ 0.044856] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
194[ 0.058089] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
195[ 0.067838] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
196[ 0.074736] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.082589] Initializing cgroup subsys memory
198[ 0.086968] Initializing cgroup subsys devices
199[ 0.091438] Initializing cgroup subsys freezer
200[ 0.095897] Initializing cgroup subsys net_cls
201[ 0.100357] Initializing cgroup subsys blkio
202[ 0.104637] Initializing cgroup subsys perf_event
203[ 0.109355] Initializing cgroup subsys net_prio
204[ 0.113934] tseg: 0000000000
205[ 0.113948] CPU: Physical Processor ID: 0
206[ 0.117966] CPU: Processor Core ID: 0
207[ 0.121654] mce: CPU supports 6 MCE banks
208[ 0.125684] LVT offset 0 assigned for vector 0xf9
209[ 0.130412] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
210Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
211tlb_flushall_shift: 6
212[ 0.145752] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
213[ 0.154753] ftrace: allocating 21601 entries in 85 pages
214[ 0.170125] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
215[ 0.215646] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
216[ 0.332520] Performance Events: AMD PMU driver.
217[ 0.337097] ... version: 0
218[ 0.341112] ... bit width: 48
219[ 0.345209] ... generic registers: 4
220[ 0.349229] ... value mask: 0000ffffffffffff
221[ 0.354539] ... max period: 00007fffffffffff
222[ 0.359859] ... fixed-purpose events: 0
223[ 0.363871] ... event mask: 000000000000000f
224[ 0.371775] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
225[ 0.379977] x86: Booting SMP configuration:
226[ 0.384174] .... node #0, CPUs: #1 #2 #3
227[ 0.428529] .... node #1, CPUs: #4 #5 #6 #7
228[ 0.581132] x86: Booted up 2 nodes, 8 CPUs
229[ 0.585437] smpboot: Total of 8 processors activated (30557.60 BogoMIPS)
230[ 0.598010] devtmpfs: initialized
231[ 0.609922] pinctrl core: initialized pinctrl subsystem
232[ 0.615310] NET: Registered protocol family 16
233[ 0.619974] cpuidle: using governor ladder
234[ 0.624081] cpuidle: using governor menu
235[ 0.628017] node 0 link 1: io port [1000, 3fff]
236[ 0.628020] TOM: 00000000c0000000 aka 3072M
237[ 0.632213] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
238[ 0.632217] node 0 link 1: mmio [fc000000, fc3fffff]
239[ 0.632220] node 0 link 1: mmio [f8000000, fbffffff]
240[ 0.632222] TOM2: 0000000180000000 aka 6144M
241[ 0.636500] bus: [bus 00-05] on node 0 link 1
242[ 0.636502] bus: 00 [io 0x0000-0xffff]
243[ 0.636504] bus: 00 [mem 0xd0000000-0xffffffff]
244[ 0.636505] bus: 00 [mem 0x180000000-0xfcffffffff]
245[ 0.636611] ACPI: bus type PCI registered
246[ 0.640624] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
247[ 0.647229] PCI: Using configuration type 1 for base access
248[ 0.652805] PCI: Using configuration type 1 for extended access
249[ 0.659336] mtrr: your CPUs had inconsistent variable MTRR settings
250[ 0.665601] mtrr: probably your BIOS does not setup all CPUs.
251[ 0.671352] mtrr: corrected configuration.
252[ 0.685293] ACPI: Added _OSI(Module Device)
253[ 0.689491] ACPI: Added _OSI(Processor Device)
254[ 0.693942] ACPI: Added _OSI(3.0 _SCP Extensions)
255[ 0.698654] ACPI: Added _OSI(Processor Aggregator Device)
256[ 0.707698] ACPI: Interpreter enabled
257[ 0.711386] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
258[ 0.720650] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
259[ 0.729905] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
260[ 0.739176] ACPI: (supports S0 S1 S5)
261[ 0.742847] ACPI: Using IOAPIC for interrupt routing
262[ 0.747863] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
263[ 0.775688] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
264[ 0.781875] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
265[ 0.790093] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
266[ 0.826355] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
267[ 0.836381] PCI host bridge to bus 0000:00
268[ 0.840489] pci_bus 0000:00: root bus resource [bus 00-05]
269[ 0.845972] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
270[ 0.852156] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
271[ 0.859036] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.865915] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.872793] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.878991] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.879188] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.879195] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.879323] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.879334] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.879354] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.879373] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.879400] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.879504] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.879514] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.879541] pci 0000:00:02.0: supports D1 D2
285[ 0.879570] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.879653] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.885372] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.885387] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.885439] pci 0000:00:02.1: supports D1 D2
290[ 0.885446] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.885497] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.891228] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.891255] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.891298] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.898437] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.904961] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.912100] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.918730] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.918745] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.918758] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.918763] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.918767] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.918772] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.918777] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.918919] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.918927] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.918939] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.918958] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.918967] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.918978] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.918991] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.919134] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.919254] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.924972] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.925022] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.925074] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.930797] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.930850] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.930914] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.936633] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.936683] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.936733] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.942459] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.942508] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.942564] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.948310] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.948438] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.948541] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.948651] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.948782] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.948906] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.949065] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.949185] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.949305] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.949435] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.949628] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.949647] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.949658] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.949664] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.949703] pci 0000:01:04.0: supports D1 D2
341[ 0.949833] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.954814] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.954817] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.954820] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.954935] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.954975] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.955018] pci 0000:02:00.0: reg 0x30: [mem 0x21400000-0x2140ffff pref]
348[ 0.955097] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.955199] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.965198] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.970166] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.970276] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.970311] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.970414] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.970504] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.980504] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.985474] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.985550] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.990598] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 0.995583] pci_bus 0000:00: on NUMA node 0
361[ 0.995681] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.001841] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.008001] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.015324] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.022642] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.029974] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.037302] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.043459] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.049641] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.056956] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.064263] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.071635] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.077792] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.083957] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.091278] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.098608] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.105918] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.114452] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.120931] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.127400] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.133867] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.140595] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.145711] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.151380] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.159469] vgaarb: loaded
386[ 1.162185] vgaarb: bridge control possible 0000:01:04.0
387[ 1.167662] PCI: Using ACPI for IRQ routing
388[ 1.171859] PCI: pci_cache_line_size set to 64 bytes
389[ 1.171916] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.171920] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.172231] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.179283] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.184345] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.193026] Switched to clocksource hpet
395[ 1.208564] pnp: PnP ACPI init
396[ 1.211673] ACPI: bus type PNP registered
397[ 1.216237] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.216316] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.216414] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.216492] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.216533] pnp 00:04: [dma 2]
402[ 1.216575] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.216597] pnp: PnP ACPI: found 5 devices
404[ 1.220703] ACPI: bus type PNP unregistered
405[ 1.232725] pci 0000:02:00.0: can't claim BAR 6 [mem 0x21400000-0x2140ffff pref]: no compatible bridge window
406[ 1.242681] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.247656] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.253758] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.260548] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.267782] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.275008] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.279978] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.286776] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.291745] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.298541] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.303512] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.308487] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.308490] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
419[ 1.308492] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
420[ 1.308495] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
421[ 1.308498] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
422[ 1.308501] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
423[ 1.308503] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
424[ 1.308506] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
425[ 1.308509] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
426[ 1.308511] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
427[ 1.308640] NET: Registered protocol family 2
428[ 1.313519] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
429[ 1.321211] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
430[ 1.328540] TCP: Hash tables configured (established 65536 bind 65536)
431[ 1.335147] TCP: reno registered
432[ 1.338408] UDP hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.344620] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
434[ 1.351404] NET: Registered protocol family 1
435[ 1.356153] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
436[ 1.362237] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
437[ 1.368135] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.373667] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.379172] pci 0000:00:0b.0: Found disabled HT MSI Mapping
440[ 1.384760] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.390295] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.395804] pci 0000:00:0c.0: Found disabled HT MSI Mapping
443[ 1.401387] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.406928] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.412437] pci 0000:00:0d.0: Found disabled HT MSI Mapping
446[ 1.418022] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.423585] pci 0000:00:00.0: Found enabled HT MSI Mapping
448[ 1.429084] pci 0000:00:0e.0: Found disabled HT MSI Mapping
449[ 1.434665] pci 0000:00:00.0: Found enabled HT MSI Mapping
450[ 1.440184] pci 0000:01:04.0: Video device with shadowed ROM
451[ 1.440193] PCI: CLS 64 bytes, default 64
452[ 1.440301] Unpacking initramfs...
453[ 1.673311] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
454[ 1.681184] PCI-DMA: Disabling AGP.
455[ 1.686261] PCI-DMA: aperture base @ b4000000 size 65536 KB
456[ 1.691846] PCI-DMA: using GART IOMMU.
457[ 1.695604] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
458[ 1.707636] platform rtc_cmos: registered platform RTC device (no PNP device found)
459[ 1.715814] microcode: CPU0: patch_level=0x01000096
460[ 1.720704] microcode: CPU1: patch_level=0x01000096
461[ 1.725599] microcode: CPU2: patch_level=0x01000096
462[ 1.730501] microcode: CPU3: patch_level=0x01000096
463[ 1.735405] microcode: CPU4: patch_level=0x01000096
464[ 1.740295] microcode: CPU5: patch_level=0x01000096
465[ 1.745190] microcode: CPU6: patch_level=0x01000096
466[ 1.750085] microcode: CPU7: patch_level=0x01000096
467[ 1.755072] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
468[ 1.763871] LVT offset 1 assigned for vector 0x400
469[ 1.768686] IBS: LVT offset 1 assigned
470[ 1.772477] perf: AMD IBS detected (0x00000007)
471[ 1.777626] futex hash table entries: 2048 (order: 5, 131072 bytes)
472[ 1.784018] audit: initializing netlink subsys (disabled)
473[ 1.789444] audit: type=2000 audit(1443710879.528:1): initialized
474[ 1.796320] HugeTLB registered 2 MB page size, pre-allocated 0 pages
475[ 1.802722] zbud: loaded
476[ 1.805627] VFS: Disk quotas dquot_6.5.2
477[ 1.809598] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
478[ 1.816141] msgmni has been set to 9945
479[ 1.820536] alg: No test for stdrng (krng)
480[ 1.824705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
481[ 1.832202] io scheduler noop registered
482[ 1.836139] io scheduler deadline registered
483[ 1.840496] io scheduler cfq registered (default)
484[ 1.845413] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
485[ 1.845537] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
486[ 1.845663] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
487[ 1.845787] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
488[ 1.845948] aer 0000:00:0b.0:pcie02: service driver aer loaded
489[ 1.845977] aer 0000:00:0c.0:pcie02: service driver aer loaded
490[ 1.846002] aer 0000:00:0d.0:pcie02: service driver aer loaded
491[ 1.846028] aer 0000:00:0e.0:pcie02: service driver aer loaded
492[ 1.846048] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
493[ 1.853018] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
494[ 1.859553] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
495[ 1.859564] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
496[ 1.866528] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
497[ 1.873059] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
498[ 1.873069] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
499[ 1.880033] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
500[ 1.880043] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
501[ 1.887009] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
502[ 1.887037] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
503[ 1.892643] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
504[ 1.899380] GHES: HEST is not enabled!
505[ 1.903269] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
506[ 1.929858] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
507[ 1.957541] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
508[ 1.965480] Linux agpgart interface v0.103
509[ 1.969798] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
510[ 1.980150] serio: i8042 KBD port at 0x60,0x64 irq 1
511[ 1.985143] serio: i8042 AUX port at 0x60,0x64 irq 12
512[ 1.990428] mousedev: PS/2 mouse device common for all mice
513[ 1.996101] rtc_cmos rtc_cmos: RTC can wake from S4
514[ 2.001309] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
515[ 2.007708] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
516[ 2.015576] ledtrig-cpu: registered to indicate activity on CPUs
517[ 2.021772] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
518[ 2.028219] AMD IOMMUv2 functionality not available on this system
519[ 2.034547] TCP: cubic registered
520[ 2.038024] NET: Registered protocol family 10
521[ 2.042903] mip6: Mobile IPv6
522[ 2.045894] NET: Registered protocol family 17
523[ 2.046415] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
524[ 2.058963] mpls_gso: MPLS GSO support
525[ 2.063564] registered taskstats version 1
526[ 2.068429] rtc_cmos rtc_cmos: setting system clock to 2015-10-01 14:48:01 UTC (1443710881)
527[ 2.076845] PM: Hibernation image not present or could not be loaded.
528[ 2.078649] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
529[ 2.086502] Write protecting the kernel read-only data: 8192k
530[ 2.095726] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
531[ 2.104313] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
532[ 2.128277] systemd-udevd[99]: starting version 215
533[ 2.134024] random: systemd-udevd urandom read with 3 bits of entropy available
534[ 2.165504] pps_core: LinuxPPS API ver. 1 registered
535[ 2.170549] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
536[ 2.180021] ACPI: bus type USB registered
537[ 2.184241] usbcore: registered new interface driver usbfs
538[ 2.184298] PTP clock support registered
539[ 2.193777] usbcore: registered new interface driver hub
540[ 2.199334] usbcore: registered new device driver usb
541[ 2.199424] tg3.c:v3.137 (May 11, 2014)
542[ 2.199436] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.199642] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
544[ 2.220635] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
545[ 2.227741] ehci-pci: EHCI PCI platform driver
546[ 2.232505] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
547[ 2.232526] ehci-pci 0000:00:02.1: EHCI Host Controller
548[ 2.232543] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
549[ 2.232561] ehci-pci 0000:00:02.1: debug port 1
550[ 2.232607] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
551[ 2.232639] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
552[ 2.240699] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
553[ 2.240763] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
554[ 2.240765] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
555[ 2.240766] usb usb1: Product: EHCI Host Controller
556[ 2.240768] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
557[ 2.240769] usb usb1: SerialNumber: 0000:00:02.1
558[ 2.240981] hub 1-0:1.0: USB hub found
559[ 2.240989] hub 1-0:1.0: 10 ports detected
560[ 2.305371] ohci-pci: OHCI PCI platform driver
561[ 2.310040] ohci-pci 0000:00:02.0: OHCI PCI host controller
562[ 2.315705] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
563[ 2.323167] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
564[ 2.335881] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
565[ 2.346145] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
566[ 2.355883] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
567[ 2.363711] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
568[ 2.370516] tg3 0000:03:00.0: enabling device (0004 -> 0006)
569[ 2.376315] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
570[ 2.386680] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
571[ 2.393472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
572[ 2.400693] usb usb2: Product: OHCI PCI host controller
573[ 2.405927] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
574[ 2.412025] usb usb2: SerialNumber: 0000:00:02.0
575[ 2.416847] hub 2-0:1.0: USB hub found
576[ 2.420614] hub 2-0:1.0: 10 ports detected
577[ 2.441076] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
578[ 2.451336] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
579[ 2.461071] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
580[ 2.468903] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
581[ 2.482146] FS-Cache: Loaded
582[ 2.489238] RPC: Registered named UNIX socket transport module.
583[ 2.495838] RPC: Registered udp transport module.
584[ 2.501922] RPC: Registered tcp transport module.
585[ 2.508012] RPC: Registered tcp NFSv4.1 backchannel transport module.
586[ 2.520479] FS-Cache: Netfs 'nfs' registered for caching
587[ 2.534256] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
588[ 2.580664] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
589[ 2.704524] tsc: Refined TSC clocksource calibration: 1909.787 MHz
590[ 3.708271] Switched to clocksource tsc
591[ 4.235326] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
592[ 4.241860] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
593[ 4.248752] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
594[ 16.417928] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
595[ 16.431646] systemd[1]: Detected architecture 'x86-64'.
596[ 17.757220] random: nonblocking pool is initialized
597[ 21.122094] systemd[1]: Inserted module 'autofs4'
598[ 21.360014] systemd[1]: Set hostname to <cb-test-tgt>.
599[ 27.310071] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
600[ 27.322788] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
601[ 27.338183] systemd[1]: Expecting device dev-ttyS0.device...
602[ 27.352145] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
603[ 27.359950] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
604[ 27.367557] systemd[1]: Starting Remote File Systems (Pre).
605[ 27.384111] systemd[1]: Reached target Remote File Systems (Pre).
606[ 27.390290] systemd[1]: Starting Encrypted Volumes.
607[ 27.404038] systemd[1]: Reached target Encrypted Volumes.
608[ 27.409477] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
609[ 27.417539] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
610[ 27.425472] systemd[1]: Starting Paths.
611[ 27.440012] systemd[1]: Reached target Paths.
612[ 27.444442] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
613[ 27.468000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
614[ 27.477428] systemd[1]: Starting Swap.
615[ 27.491992] systemd[1]: Reached target Swap.
616[ 27.496286] systemd[1]: Starting Root Slice.
617[ 27.507992] systemd[1]: Created slice Root Slice.
618[ 27.512724] systemd[1]: Starting User and Session Slice.
619[ 27.527988] systemd[1]: Created slice User and Session Slice.
620[ 27.533757] systemd[1]: Starting Delayed Shutdown Socket.
621[ 27.547969] systemd[1]: Listening on Delayed Shutdown Socket.
622[ 27.553748] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
623[ 27.571969] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
624[ 27.578954] systemd[1]: Starting Journal Socket (/dev/log).
625[ 27.595953] systemd[1]: Listening on Journal Socket (/dev/log).
626[ 27.601907] systemd[1]: Starting udev Kernel Socket.
627[ 27.615948] systemd[1]: Listening on udev Kernel Socket.
628[ 27.621302] systemd[1]: Starting udev Control Socket.
629[ 27.635948] systemd[1]: Listening on udev Control Socket.
630[ 27.641376] systemd[1]: Starting Journal Socket.
631[ 27.655926] systemd[1]: Listening on Journal Socket.
632[ 27.660941] systemd[1]: Starting System Slice.
633[ 27.675911] systemd[1]: Created slice System Slice.
634[ 27.680812] systemd[1]: Starting system-getty.slice.
635[ 27.695917] systemd[1]: Created slice system-getty.slice.
636[ 27.701339] systemd[1]: Starting system-serial\x2dgetty.slice.
637[ 27.715915] systemd[1]: Created slice system-serial\x2dgetty.slice.
638[ 27.722236] systemd[1]: Starting Increase datagram queue length...
639[ 27.741236] systemd[1]: Mounting Debug File System...
640[ 27.757114] systemd[1]: Mounting POSIX Message Queue File System...
641[ 27.975313] systemd[1]: Starting Load Kernel Modules...
642[ 28.602503] systemd[1]: Started Set Up Additional Binary Formats.
643[ 29.863066] systemd[1]: Starting Create list of required static device nodes for the current kernel...
644[ 29.888523] systemd[1]: Starting udev Coldplug all Devices...
645[ 29.904152] systemd[1]: Mounting Huge Pages File System...
646[ 29.919987] systemd[1]: Starting Slices.
647[ 29.931160] systemd[1]: Reached target Slices.
648[ 29.935690] systemd[1]: Starting Remount Root and Kernel File Systems...
649[ 30.986837] systemd[1]: Started Increase datagram queue length.
650[ 30.993348] systemd[1]: Starting Syslog Socket.
651[ 31.006836] systemd[1]: Listening on Syslog Socket.
652[ 31.011789] systemd[1]: Starting Sockets.
653[ 31.026808] systemd[1]: Reached target Sockets.
654[ 31.031469] systemd[1]: Starting Journal Service...
655[ 31.054800] systemd[1]: Started Journal Service.
656[ 37.586973] systemd-udevd[189]: starting version 215
657[ 39.195730] systemd-journald[172]: Received request to flush runtime journal from PID 1
658[ 51.441593] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
659[ 51.449408] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
660[ 51.566556] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
661[ 51.812251] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
662[ 51.820622] ACPI: Power Button [PWRB]
663[ 51.824367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
664[ 51.831763] ACPI: Power Button [PWRF]
665[ 51.842412] EDAC MC: Ver: 3.0.0
666[ 52.403278] FDC 0 is a post-1991 82077
667[ 53.009456] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
668[ 53.014655] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
669[ 53.355767] MCE: In-kernel MCE decoding enabled.
670[ 53.689202] SCSI subsystem initialized
671[ 53.862835] AMD64 EDAC driver v3.4.0
672[ 53.866480] EDAC amd64: DRAM ECC enabled.
673[ 53.870511] EDAC amd64: F10h detected (node 0).
674[ 53.875073] EDAC MC: DCT0 chip selects:
675[ 53.875075] EDAC amd64: MC: 0: 0MB 1: 0MB
676[ 53.879783] EDAC amd64: MC: 2: 0MB 3: 0MB
677[ 53.884497] EDAC amd64: MC: 4: 0MB 5: 0MB
678[ 53.889210] EDAC amd64: MC: 6: 1024MB 7: 1024MB
679[ 53.893921] EDAC MC: DCT1 chip selects:
680[ 53.893922] EDAC amd64: MC: 0: 0MB 1: 0MB
681[ 53.898635] EDAC amd64: MC: 2: 0MB 3: 0MB
682[ 53.903348] EDAC amd64: MC: 4: 0MB 5: 0MB
683[ 53.908057] EDAC amd64: MC: 6: 1024MB 7: 1024MB
684[ 53.912765] EDAC amd64: using x4 syndromes.
685[ 53.916959] EDAC amd64: MCT channel count: 2
686[ 53.921270] EDAC amd64: CS6: Registered DDR2 RAM
687[ 53.925891] EDAC amd64: CS7: Registered DDR2 RAM
688[ 53.930734] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
689[ 53.940448] EDAC amd64: DRAM ECC enabled.
690[ 53.944491] EDAC amd64: F10h detected (node 1).
691[ 53.949070] EDAC MC: DCT0 chip selects:
692[ 53.949073] EDAC amd64: MC: 0: 1024MB 1: 0MB
693[ 53.953790] EDAC amd64: MC: 2: 0MB 3: 0MB
694[ 53.958500] EDAC amd64: MC: 4: 0MB 5: 0MB
695[ 53.963215] EDAC amd64: MC: 6: 0MB 7: 0MB
696[ 53.967928] EDAC MC: DCT1 chip selects:
697[ 53.967930] EDAC amd64: MC: 0: 0MB 1: 0MB
698[ 53.972639] EDAC amd64: MC: 2: 0MB 3: 0MB
699[ 53.977353] EDAC amd64: MC: 4: 0MB 5: 0MB
700[ 53.982065] EDAC amd64: MC: 6: 0MB 7: 0MB
701[ 53.986772] EDAC amd64: using x4 syndromes.
702[ 53.990965] EDAC amd64: MCT channel count: 1
703[ 53.995281] EDAC amd64: CS0: Registered DDR2 RAM
704[ 54.000080] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
705[ 54.009794] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
706[ 54.147081] acpi-cpufreq: overriding BIOS provided _PSD data
707[ 54.374924] libata version 3.00 loaded.
708[ 54.498268] sata_nv 0000:00:07.0: version 3.5
709[ 54.498545] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
710[ 54.504827] input: PC Speaker as /devices/platform/pcspkr/input/input4
711[ 54.505177] scsi0 : sata_nv
712[ 54.514631] scsi1 : sata_nv
713[ 54.517511] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
714[ 54.524652] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
715[ 54.532043] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
716[ 54.538553] scsi2 : sata_nv
717[ 54.541885] scsi3 : sata_nv
718[ 54.544779] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
719[ 54.551928] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
720[ 54.842502] ata1: SATA link down (SStatus 0 SControl 300)
721[ 54.866762] pata_amd 0000:00:06.0: version 0.4.1
722[ 54.867666] scsi4 : pata_amd
723[ 54.870517] ata3: SATA link down (SStatus 0 SControl 300)
724[ 54.876243] scsi5 : pata_amd
725[ 54.879211] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
726[ 54.886176] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
727[ 55.162391] ata2: SATA link down (SStatus 0 SControl 300)
728[ 55.478283] ata4: SATA link down (SStatus 0 SControl 300)
729[ 56.008031] kvm: Nested Virtualization enabled
730[ 56.012525] kvm: Nested Paging enabled
731[ 98.025534] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
732[ 301.108240] [Hardware Error]: Corrected error, no action required.
733[ 301.114453] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc224100da080a13
734[ 301.123913] [Hardware Error]: MC4_ADDR: 0x00000000bd0a1bc0
735[ 301.129416] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
736[ 301.137228] EDAC MC1: 1 CE Failed to map error addr to a csrow on mc#1csrow#0channel#0 (channel:0 page:0xbd0a1 offset:0xbc0 grain:0 syndrome:0xda44)
737[ 301.150523] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
738[ 451.198250] [Hardware Error]: Corrected error, no action required.
739[ 451.204469] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[-|CE|MiscV|-|AddrV|CECC]: 0x9c224000da080813
740[ 451.213656] [Hardware Error]: MC4_ADDR: 0x000000017f3ec980
741[ 451.219159] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
742[ 451.226971] EDAC MC1: 1 CE on mc#1csrow#0channel#0 (csrow:0 channel:0 page:0x17f3ec offset:0x980 grain:0 syndrome:0xda44)
743[ 451.237934] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: SRC (no timeout)
744[ 838.602611] nfs: server 10.100.1.1 not responding, still trying
745[ 841.760098] nfs: server 10.100.1.1 OK