blob: 4b477ebab8a2655b606626bd5c0e336f14037cfd [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +02001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-10176-gac83367-dirty 07/03/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4210 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.782 MHz processor
187[ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.56 BogoMIPS (lpj=7639128)
188[ 0.010954] pid_max: default: 32768 minimum: 301
189[ 0.015676] ACPI: Core revision 20140424
190[ 0.022090] ACPI: All ACPI Tables successfully acquired
191[ 0.027610] Security Framework initialized
192[ 0.031789] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037698] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045510] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058794] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068661] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075689] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083645] Initializing cgroup subsys memory
199[ 0.088106] Initializing cgroup subsys devices
200[ 0.092657] Initializing cgroup subsys freezer
201[ 0.097182] Initializing cgroup subsys net_cls
202[ 0.101717] Initializing cgroup subsys blkio
203[ 0.106072] Initializing cgroup subsys perf_event
204[ 0.110870] Initializing cgroup subsys net_prio
205[ 0.115535] tseg: 0000000000
206[ 0.115549] CPU: Physical Processor ID: 0
207[ 0.119670] CPU: Processor Core ID: 0
208[ 0.124464] mce: CPU supports 6 MCE banks
209[ 0.128600] LVT offset 0 assigned for vector 0xf9
210[ 0.133402] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148889] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158021] ftrace: allocating 21601 entries in 85 pages
215[ 0.173473] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219124] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336310] Performance Events: AMD PMU driver.
218[ 0.341022] ... version: 0
219[ 0.345128] ... bit width: 48
220[ 0.349315] ... generic registers: 4
221[ 0.353410] ... value mask: 0000ffffffffffff
222[ 0.358803] ... max period: 00007fffffffffff
223[ 0.364208] ... fixed-purpose events: 0
224[ 0.368303] ... event mask: 000000000000000f
225[ 0.376329] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384639] x86: Booting SMP configuration:
227[ 0.388907] .... node #0, CPUs: #1 #2 #3
228[ 0.433523] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585107] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589554] smpboot: Total of 8 processors activated (30557.49 BogoMIPS)
231[ 0.602160] devtmpfs: initialized
232[ 0.614150] pinctrl core: initialized pinctrl subsystem
233[ 0.619620] NET: Registered protocol family 16
234[ 0.624356] cpuidle: using governor ladder
235[ 0.628523] cpuidle: using governor menu
236[ 0.632529] node 0 link 1: io port [1000, 3fff]
237[ 0.632532] TOM: 00000000c0000000 aka 3072M
238[ 0.636787] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636791] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636794] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636796] TOM2: 0000000180000000 aka 6144M
242[ 0.641153] bus: [bus 00-05] on node 0 link 1
243[ 0.641155] bus: 00 [io 0x0000-0xffff]
244[ 0.641157] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641158] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641265] ACPI: bus type PCI registered
247[ 0.645353] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652031] PCI: Using configuration type 1 for base access
249[ 0.657676] PCI: Using configuration type 1 for extended access
250[ 0.664294] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670656] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676485] mtrr: corrected configuration.
253[ 0.693198] ACPI: Added _OSI(Module Device)
254[ 0.697499] ACPI: Added _OSI(Processor Device)
255[ 0.702014] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706796] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715878] ACPI: Interpreter enabled
258[ 0.719630] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729064] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738519] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.747974] ACPI: (supports S0 S1 S5)
262[ 0.751728] ACPI: Using IOAPIC for interrupt routing
263[ 0.756808] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.783926] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.790214] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.798527] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.836495] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.846640] PCI host bridge to bus 0000:00
269[ 0.850831] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.856408] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.862677] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.869642] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.876603] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.882890] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.883072] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.883079] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.883206] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.883215] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.883238] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.883243] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.883298] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.883405] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.883419] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.883446] pci 0000:00:02.0: supports D1 D2
285[ 0.883455] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.883507] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.889326] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.889341] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.889382] pci 0000:00:02.1: supports D1 D2
290[ 0.889384] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.889431] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.895245] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.895289] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.895300] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.902530] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.909137] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.916366] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.923086] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.923096] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.923101] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.923106] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.923110] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.923115] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.923120] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.923273] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.923284] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.923294] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.923299] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.923312] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.923327] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.923341] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.923489] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.923587] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.929379] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.929429] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.929482] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.935293] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.935338] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.935389] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.941199] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.941239] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.941303] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.947107] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.947151] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.947208] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.953010] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.953181] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.953296] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.953416] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.953559] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.953713] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.953852] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.953961] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.954101] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.954256] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.954454] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.954480] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.954497] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.954514] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.954549] pci 0000:01:04.0: supports D1 D2
341[ 0.954671] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.959736] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.959739] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.959743] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.959864] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.959893] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.959930] pci 0000:02:00.0: reg 0x30: [mem 0x61c00000-0x61c0ffff pref]
348[ 0.960041] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.960126] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.970245] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.975295] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.975376] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.975401] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.975512] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.975609] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.985733] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.990786] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.990857] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.995996] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.001082] pci_bus 0000:00: on NUMA node 0
361[ 1.001183] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.007609] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.014036] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.021707] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.029369] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.037024] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.044683] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.051104] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.057555] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.065203] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.072876] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.080548] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.086981] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.093412] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.101064] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.108722] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.116408] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.125518] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.132233] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.138957] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.145666] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.152633] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.157902] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.163691] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.171882] vgaarb: loaded
386[ 1.174678] vgaarb: bridge control possible 0000:01:04.0
387[ 1.180244] PCI: Using ACPI for IRQ routing
388[ 1.184524] PCI: pci_cache_line_size set to 64 bytes
389[ 1.184581] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.184585] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.184913] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.192044] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.197336] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.206091] Switched to clocksource hpet
395[ 1.221747] pnp: PnP ACPI init
396[ 1.224979] ACPI: bus type PNP registered
397[ 1.229591] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.229678] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.229762] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.229857] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.229894] pnp 00:04: [dma 2]
402[ 1.229942] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.229965] pnp: PnP ACPI: found 5 devices
404[ 1.234157] ACPI: bus type PNP unregistered
405[ 1.246214] pci 0000:02:00.0: can't claim BAR 6 [mem 0x61c00000-0x61c0ffff pref]: no compatible bridge window
406[ 1.256274] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.261311] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.267484] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.274355] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.281689] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.289052] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.294103] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.300980] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.306024] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.312901] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.317956] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.323008] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.323011] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.323013] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.323016] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.323020] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.323022] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.323025] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.323027] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.323030] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.323163] NET: Registered protocol family 2
427[ 1.328126] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.335927] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.343344] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.350023] TCP: reno registered
431[ 1.353339] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.359621] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.366487] NET: Registered protocol family 1
434[ 1.371337] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.377569] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.383552] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.389162] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.394759] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.400414] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.406048] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.411646] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.417299] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.422910] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.428497] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.434150] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.439766] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.445355] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.451009] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.456603] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.456612] PCI: CLS 64 bytes, default 64
451[ 1.456717] Unpacking initramfs...
452[ 1.689652] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.697625] PCI-DMA: Disabling AGP.
454[ 1.702855] PCI-DMA: aperture base @ b4000000 size 65536 KB
455[ 1.708526] PCI-DMA: using GART IOMMU.
456[ 1.712363] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.724786] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.733129] microcode: CPU0: patch_level=0x01000096
459[ 1.738128] microcode: CPU1: patch_level=0x01000096
460[ 1.743136] microcode: CPU2: patch_level=0x01000096
461[ 1.748148] microcode: CPU3: patch_level=0x01000096
462[ 1.753155] microcode: CPU4: patch_level=0x01000096
463[ 1.758156] microcode: CPU5: patch_level=0x01000096
464[ 1.763156] microcode: CPU6: patch_level=0x01000096
465[ 1.769236] microcode: CPU7: patch_level=0x01000096
466[ 1.774319] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.783257] LVT offset 1 assigned for vector 0x400
468[ 1.788156] IBS: LVT offset 1 assigned
469[ 1.792032] perf: AMD IBS detected (0x00000007)
470[ 1.797258] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.803745] audit: initializing netlink subsys (disabled)
472[ 1.809253] audit: type=2000 audit(1435952003.624:1): initialized
473[ 1.816215] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.822716] zbud: loaded
475[ 1.825676] VFS: Disk quotas dquot_6.5.2
476[ 1.829733] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.836366] msgmni has been set to 9945
478[ 1.840808] alg: No test for stdrng (krng)
479[ 1.845091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.852738] io scheduler noop registered
481[ 1.856767] io scheduler deadline registered
482[ 1.861204] io scheduler cfq registered (default)
483[ 1.866217] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.866345] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.866455] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.866568] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.866736] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.866764] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.866789] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.866816] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.866837] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.873919] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.880542] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.880552] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.887593] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.894204] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.894214] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.901258] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.901267] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.908309] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.908341] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.914022] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.920861] GHES: HEST is not enabled!
504[ 1.924826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.951618] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.979407] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.987424] Linux agpgart interface v0.103
508[ 1.991840] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.002390] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.007498] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.012850] mousedev: PS/2 mouse device common for all mice
512[ 2.018629] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.023827] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.030324] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.038311] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.044578] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.051121] AMD IOMMUv2 functionality not available on this system
518[ 2.057534] TCP: cubic registered
519[ 2.061080] NET: Registered protocol family 10
520[ 2.066055] mip6: Mobile IPv6
521[ 2.069119] NET: Registered protocol family 17
522[ 2.073730] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.082505] mpls_gso: MPLS GSO support
524[ 2.087252] registered taskstats version 1
525[ 2.092218] rtc_cmos rtc_cmos: setting system clock to 2015-07-03 19:33:24 UTC (1435952004)
526[ 2.100800] PM: Hibernation image not present or could not be loaded.
527[ 2.102636] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.110623] Write protecting the kernel read-only data: 8192k
529[ 2.119949] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.128706] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.152803] systemd-udevd[99]: starting version 215
532[ 2.158648] random: systemd-udevd urandom read with 3 bits of entropy available
533[ 2.189295] ACPI: bus type USB registered
534[ 2.193614] usbcore: registered new interface driver usbfs
535[ 2.199278] usbcore: registered new interface driver hub
536[ 2.204913] usbcore: registered new device driver usb
537[ 2.204952] pps_core: LinuxPPS API ver. 1 registered
538[ 2.204954] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
539[ 2.224981] PTP clock support registered
540[ 2.229367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.236421] tg3.c:v3.137 (May 11, 2014)
542[ 2.240494] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.240630] ehci-pci: EHCI PCI platform driver
544[ 2.251163] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.251301] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.263696] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.269057] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.276591] ehci-pci 0000:00:02.1: debug port 1
549[ 2.281243] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.281268] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.297853] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.304020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.310930] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.318278] usb usb1: Product: EHCI Host Controller
555[ 2.323275] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.329472] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.334463] hub 1-0:1.0: USB hub found
558[ 2.338341] hub 1-0:1.0: 10 ports detected
559[ 2.343431] ohci-pci: OHCI PCI platform driver
560[ 2.348241] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.353949] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.361565] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.368361] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.378760] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.388616] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.396571] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.403510] tg3 0000:03:00.0: enabling device (0004 -> 0006)
568[ 2.409410] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
569[ 2.423745] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
570[ 2.430617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
571[ 2.437960] usb usb2: Product: OHCI PCI host controller
572[ 2.443263] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
573[ 2.449443] usb usb2: SerialNumber: 0000:00:02.0
574[ 2.454558] hub 2-0:1.0: USB hub found
575[ 2.458420] hub 2-0:1.0: 10 ports detected
576[ 2.470343] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.480766] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.490628] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.498576] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.512797] FS-Cache: Loaded
581[ 2.519412] RPC: Registered named UNIX socket transport module.
582[ 2.526029] RPC: Registered udp transport module.
583[ 2.532104] RPC: Registered tcp transport module.
584[ 2.538195] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.550716] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.569017] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.613744] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.721589] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.725339] Switched to clocksource tsc
590[ 4.270095] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.276751] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.283715] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 9.964517] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 9.978696] systemd[1]: Detected architecture 'x86-64'.
595[ 12.043631] random: nonblocking pool is initialized
596[ 12.544427] systemd[1]: Inserted module 'autofs4'
597[ 12.554065] systemd[1]: Set hostname to <cb-test-tgt>.
598[ 15.157337] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 15.170218] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 15.185777] systemd[1]: Expecting device dev-ttyS0.device...
601[ 15.201315] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 15.209159] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 15.216865] systemd[1]: Starting Remote File Systems (Pre).
604[ 15.233378] systemd[1]: Reached target Remote File Systems (Pre).
605[ 15.239687] systemd[1]: Starting Encrypted Volumes.
606[ 15.253368] systemd[1]: Reached target Encrypted Volumes.
607[ 15.258966] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 15.267192] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 15.275260] systemd[1]: Starting Paths.
610[ 15.289275] systemd[1]: Reached target Paths.
611[ 15.293798] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
612[ 15.317282] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
613[ 15.326844] systemd[1]: Starting Swap.
614[ 15.341262] systemd[1]: Reached target Swap.
615[ 15.345672] systemd[1]: Starting Root Slice.
616[ 15.357240] systemd[1]: Created slice Root Slice.
617[ 15.362059] systemd[1]: Starting User and Session Slice.
618[ 15.377244] systemd[1]: Created slice User and Session Slice.
619[ 15.383124] systemd[1]: Starting Delayed Shutdown Socket.
620[ 15.397243] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 15.403137] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 15.421224] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 15.428323] systemd[1]: Starting Journal Socket (/dev/log).
624[ 15.445224] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 15.451294] systemd[1]: Starting udev Kernel Socket.
626[ 15.465218] systemd[1]: Listening on udev Kernel Socket.
627[ 15.471757] systemd[1]: Starting udev Control Socket.
628[ 15.489200] systemd[1]: Listening on udev Control Socket.
629[ 15.494752] systemd[1]: Starting Journal Socket.
630[ 15.509186] systemd[1]: Listening on Journal Socket.
631[ 15.514300] systemd[1]: Starting System Slice.
632[ 15.529176] systemd[1]: Created slice System Slice.
633[ 15.534168] systemd[1]: Starting system-getty.slice.
634[ 15.549182] systemd[1]: Created slice system-getty.slice.
635[ 15.554723] systemd[1]: Starting system-serial\x2dgetty.slice.
636[ 15.569166] systemd[1]: Created slice system-serial\x2dgetty.slice.
637[ 15.575567] systemd[1]: Starting Increase datagram queue length...
638[ 15.594648] systemd[1]: Mounting Debug File System...
639[ 15.610720] systemd[1]: Mounting POSIX Message Queue File System...
640[ 15.774483] systemd[1]: Starting Load Kernel Modules...
641[ 16.109295] systemd[1]: Started Set Up Additional Binary Formats.
642[ 16.148010] systemd[1]: Starting Create list of required static device nodes for the current kernel...
643[ 16.174524] systemd[1]: Starting udev Coldplug all Devices...
644[ 16.190521] systemd[1]: Mounting Huge Pages File System...
645[ 16.206290] systemd[1]: Starting Slices.
646[ 16.220994] systemd[1]: Reached target Slices.
647[ 16.225720] systemd[1]: Starting Remount Root and Kernel File Systems...
648[ 18.688221] systemd[1]: Started Increase datagram queue length.
649[ 18.695021] systemd[1]: Starting Syslog Socket.
650[ 18.708157] systemd[1]: Listening on Syslog Socket.
651[ 18.713250] systemd[1]: Starting Sockets.
652[ 18.728089] systemd[1]: Reached target Sockets.
653[ 18.732793] systemd[1]: Starting Journal Service...
654[ 18.760148] systemd[1]: Started Journal Service.
655[ 24.079576] systemd-udevd[192]: starting version 215
656[ 24.137082] systemd-journald[173]: Received request to flush runtime journal from PID 1
657[ 36.080657] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
658[ 36.088650] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
659[ 36.832475] EDAC MC: Ver: 3.0.0
660[ 36.910219] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
661[ 37.478194] SCSI subsystem initialized
662[ 37.693543] MCE: In-kernel MCE decoding enabled.
663[ 37.706511] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
664[ 37.715031] ACPI: Power Button [PWRB]
665[ 37.718860] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
666[ 37.726379] ACPI: Power Button [PWRF]
667[ 37.953372] FDC 0 is a post-1991 82077
668[ 38.352108] libata version 3.00 loaded.
669[ 38.477167] AMD64 EDAC driver v3.4.0
670[ 38.480952] EDAC amd64: DRAM ECC enabled.
671[ 38.485070] EDAC amd64: F10h detected (node 0).
672[ 38.489720] EDAC MC: DCT0 chip selects:
673[ 38.489722] EDAC amd64: MC: 0: 0MB 1: 0MB
674[ 38.494560] EDAC amd64: MC: 2: 0MB 3: 0MB
675[ 38.499406] EDAC amd64: MC: 4: 0MB 5: 0MB
676[ 38.504266] EDAC amd64: MC: 6: 1024MB 7: 1024MB
677[ 38.509097] EDAC MC: DCT1 chip selects:
678[ 38.509098] EDAC amd64: MC: 0: 0MB 1: 0MB
679[ 38.513928] EDAC amd64: MC: 2: 0MB 3: 0MB
680[ 38.518773] EDAC amd64: MC: 4: 0MB 5: 0MB
681[ 38.523606] EDAC amd64: MC: 6: 1024MB 7: 1024MB
682[ 38.523837] input: PC Speaker as /devices/platform/pcspkr/input/input4
683[ 38.535022] EDAC amd64: using x4 syndromes.
684[ 38.539326] EDAC amd64: MCT channel count: 2
685[ 38.543797] EDAC amd64: CS6: Registered DDR2 RAM
686[ 38.548574] EDAC amd64: CS7: Registered DDR2 RAM
687[ 38.553600] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
688[ 38.563483] EDAC amd64: DRAM ECC enabled.
689[ 38.567662] EDAC amd64: F10h detected (node 1).
690[ 38.572321] EDAC MC: DCT0 chip selects:
691[ 38.572324] EDAC amd64: MC: 0: 1024MB 1: 0MB
692[ 38.577121] EDAC amd64: MC: 2: 0MB 3: 0MB
693[ 38.581918] EDAC amd64: MC: 4: 0MB 5: 0MB
694[ 38.586709] EDAC amd64: MC: 6: 0MB 7: 0MB
695[ 38.591474] EDAC MC: DCT1 chip selects:
696[ 38.591476] EDAC amd64: MC: 0: 0MB 1: 0MB
697[ 38.596273] EDAC amd64: MC: 2: 0MB 3: 0MB
698[ 38.601067] EDAC amd64: MC: 4: 0MB 5: 0MB
699[ 38.605866] EDAC amd64: MC: 6: 0MB 7: 0MB
700[ 38.610669] EDAC amd64: using x4 syndromes.
701[ 38.614944] EDAC amd64: MCT channel count: 1
702[ 38.619342] EDAC amd64: CS0: Registered DDR2 RAM
703[ 38.624246] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
704[ 38.634103] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
705[ 38.634163] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
706[ 38.634199] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
707[ 38.751619] sata_nv 0000:00:07.0: version 3.5
708[ 38.751892] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
709[ 38.758320] scsi0 : sata_nv
710[ 38.761428] scsi1 : sata_nv
711[ 38.764375] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
712[ 38.771608] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
713[ 38.779035] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
714[ 38.785308] scsi2 : sata_nv
715[ 38.788349] scsi3 : sata_nv
716[ 38.791277] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
717[ 38.798516] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
718[ 38.865188] pata_amd 0000:00:06.0: version 0.4.1
719[ 38.865778] scsi4 : pata_amd
720[ 38.868929] scsi5 : pata_amd
721[ 38.871990] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
722[ 38.879067] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
723[ 38.914399] acpi-cpufreq: overriding BIOS provided _PSD data
724[ 39.089018] ata1: SATA link down (SStatus 0 SControl 300)
725[ 39.117002] ata3: SATA link down (SStatus 0 SControl 300)
726[ 39.404894] ata2: SATA link down (SStatus 0 SControl 300)
727[ 39.720790] ata4: SATA link down (SStatus 0 SControl 300)
728[ 40.546135] kvm: Nested Virtualization enabled
729[ 40.550724] kvm: Nested Paging enabled
730[ 82.118672] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****