Gitiles
Code Review Sign In
review.coreboot.org / board-status / HEAD / . / asus / kfsn4-dre / 4.0-10171-gcdf8ee6 / 2015-07-02T01:01:24Z / kernel_log.txt
blob: a6ae6c9807a7e9c6112a142aa009b25a882d2250 [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-10171-gcdf8ee6-dirty 07/02/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4210 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.847 MHz processor
187[ 0.000161] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.69 BogoMIPS (lpj=7639388)
188[ 0.010954] pid_max: default: 32768 minimum: 301
189[ 0.015675] ACPI: Core revision 20140424
190[ 0.022077] ACPI: All ACPI Tables successfully acquired
191[ 0.027583] Security Framework initialized
192[ 0.031762] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037672] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045485] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058800] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068673] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075705] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083658] Initializing cgroup subsys memory
199[ 0.088122] Initializing cgroup subsys devices
200[ 0.092675] Initializing cgroup subsys freezer
201[ 0.097199] Initializing cgroup subsys net_cls
202[ 0.101734] Initializing cgroup subsys blkio
203[ 0.106090] Initializing cgroup subsys perf_event
204[ 0.110886] Initializing cgroup subsys net_prio
205[ 0.115544] tseg: 0000000000
206[ 0.115557] CPU: Physical Processor ID: 0
207[ 0.119677] CPU: Processor Core ID: 0
208[ 0.124472] mce: CPU supports 6 MCE banks
209[ 0.128600] LVT offset 0 assigned for vector 0xf9
210[ 0.133401] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148889] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158026] ftrace: allocating 21601 entries in 85 pages
215[ 0.173510] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219157] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336310] Performance Events: AMD PMU driver.
218[ 0.341036] ... version: 0
219[ 0.345128] ... bit width: 48
220[ 0.349323] ... generic registers: 4
221[ 0.353411] ... value mask: 0000ffffffffffff
222[ 0.358812] ... max period: 00007fffffffffff
223[ 0.364216] ... fixed-purpose events: 0
224[ 0.368310] ... event mask: 000000000000000f
225[ 0.376334] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384647] x86: Booting SMP configuration:
227[ 0.388910] .... node #0, CPUs: #1 #2 #3
228[ 0.433476] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585143] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589587] smpboot: Total of 8 processors activated (30558.01 BogoMIPS)
231[ 0.602233] devtmpfs: initialized
232[ 0.614255] pinctrl core: initialized pinctrl subsystem
233[ 0.619727] NET: Registered protocol family 16
234[ 0.624465] cpuidle: using governor ladder
235[ 0.628642] cpuidle: using governor menu
236[ 0.632641] node 0 link 1: io port [1000, 3fff]
237[ 0.632644] TOM: 00000000c0000000 aka 3072M
238[ 0.636906] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636910] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636913] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636915] TOM2: 0000000180000000 aka 6144M
242[ 0.641258] bus: [bus 00-05] on node 0 link 1
243[ 0.641260] bus: 00 [io 0x0000-0xffff]
244[ 0.641261] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641263] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641369] ACPI: bus type PCI registered
247[ 0.645457] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652130] PCI: Using configuration type 1 for base access
249[ 0.657780] PCI: Using configuration type 1 for extended access
250[ 0.664396] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670761] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676588] mtrr: corrected configuration.
253[ 0.693210] ACPI: Added _OSI(Module Device)
254[ 0.697514] ACPI: Added _OSI(Processor Device)
255[ 0.702030] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706813] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715897] ACPI: Interpreter enabled
258[ 0.719655] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729098] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738553] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.748007] ACPI: (supports S0 S1 S5)
262[ 0.751761] ACPI: Using IOAPIC for interrupt routing
263[ 0.756850] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.784655] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.790922] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.799240] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.838177] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.848322] PCI host bridge to bus 0000:00
269[ 0.852510] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.858089] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.864350] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.871317] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.878282] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.884565] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.884747] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.884754] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.884890] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.884899] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.884922] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.884927] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.884977] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.885074] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.885088] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.885114] pci 0000:00:02.0: supports D1 D2
285[ 0.885126] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.885191] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.891007] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.891021] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.891063] pci 0000:00:02.1: supports D1 D2
290[ 0.891065] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.891114] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.896920] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.896964] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.896975] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.904192] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.910805] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.918032] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.924744] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.924754] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.924759] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.924764] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.924768] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.924773] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.924778] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.924907] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.924919] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.924929] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.924934] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.924947] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.924962] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.924976] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.925123] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.925221] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.931016] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.931066] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.931116] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.936930] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.936983] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.937064] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.942879] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.942919] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.942983] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.948796] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.948840] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.948919] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.954747] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.954919] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.955034] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.955153] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.955296] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.955447] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.955599] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.955721] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.955860] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.956021] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.956198] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.956218] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.956225] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.956234] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.956269] pci 0000:01:04.0: supports D1 D2
341[ 0.956387] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.961450] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.961454] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.961457] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.961583] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.961612] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.961648] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
348[ 0.961765] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.961876] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.972011] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.977047] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.977145] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.977170] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.977289] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.977397] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.987514] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.992575] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.992646] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.997771] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.002863] pci_bus 0000:00: on NUMA node 0
361[ 1.002964] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.009397] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.015825] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.023512] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.031173] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.038839] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.046498] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.052923] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.059344] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.066995] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.074669] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.082325] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.088740] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.095190] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.102847] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.110530] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.118209] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.127332] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.134074] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.140797] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.147525] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.154503] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.159773] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.165552] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.173753] vgaarb: loaded
386[ 1.176554] vgaarb: bridge control possible 0000:01:04.0
387[ 1.182113] PCI: Using ACPI for IRQ routing
388[ 1.186386] PCI: pci_cache_line_size set to 64 bytes
389[ 1.186442] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.186446] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
391[ 1.186776] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.193913] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.199235] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.207986] Switched to clocksource hpet
395[ 1.223614] pnp: PnP ACPI init
396[ 1.226840] ACPI: bus type PNP registered
397[ 1.231450] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.231536] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.231619] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.231714] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.231752] pnp 00:04: [dma 2]
402[ 1.231799] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.231821] pnp: PnP ACPI: found 5 devices
404[ 1.236005] ACPI: bus type PNP unregistered
405[ 1.248058] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
406[ 1.258159] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.263201] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.269370] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.276245] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.283578] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.290939] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.295980] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.302849] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.307895] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.314771] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.319835] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.324886] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.324889] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.324891] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.324894] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.324897] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.324900] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.324902] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.324905] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.324908] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.325042] NET: Registered protocol family 2
427[ 1.330004] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.337804] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.345225] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.351915] TCP: reno registered
431[ 1.355235] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.361519] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.368374] NET: Registered protocol family 1
434[ 1.373207] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.379397] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.385375] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.390997] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.396581] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.402234] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.407863] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.413466] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.419127] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.424757] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.430345] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.436004] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.441635] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.447218] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.452880] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.458480] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.458488] PCI: CLS 64 bytes, default 64
451[ 1.458597] Unpacking initramfs...
452[ 1.691422] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.699406] PCI-DMA: Disabling AGP.
454[ 1.704644] PCI-DMA: aperture base @ b4000000 size 65536 KB
455[ 1.710309] PCI-DMA: using GART IOMMU.
456[ 1.714140] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.726548] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.734888] microcode: CPU0: patch_level=0x01000096
459[ 1.739886] microcode: CPU1: patch_level=0x01000096
460[ 1.744892] microcode: CPU2: patch_level=0x01000096
461[ 1.749897] microcode: CPU3: patch_level=0x01000096
462[ 1.754905] microcode: CPU4: patch_level=0x01000096
463[ 1.759905] microcode: CPU5: patch_level=0x01000096
464[ 1.764897] microcode: CPU6: patch_level=0x01000096
465[ 1.770991] microcode: CPU7: patch_level=0x01000096
466[ 1.776072] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.785015] LVT offset 1 assigned for vector 0x400
468[ 1.789915] IBS: LVT offset 1 assigned
469[ 1.793814] perf: AMD IBS detected (0x00000007)
470[ 1.799045] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.805522] audit: initializing netlink subsys (disabled)
472[ 1.811034] audit: type=2000 audit(1435801156.624:1): initialized
473[ 1.817988] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.824492] zbud: loaded
475[ 1.827455] VFS: Disk quotas dquot_6.5.2
476[ 1.831522] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.838144] msgmni has been set to 9945
478[ 1.842592] alg: No test for stdrng (krng)
479[ 1.846879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.854531] io scheduler noop registered
481[ 1.858556] io scheduler deadline registered
482[ 1.862997] io scheduler cfq registered (default)
483[ 1.868023] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.868151] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.868279] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.868405] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.868572] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.868599] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.868624] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.868651] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.868673] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.875764] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.882381] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.882391] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.889440] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.896049] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.896058] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.903102] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.903111] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.910154] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.910186] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.915873] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.922704] GHES: HEST is not enabled!
504[ 1.926670] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.953463] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.981258] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.989272] Linux agpgart interface v0.103
508[ 1.993684] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.004367] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.009481] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.014826] mousedev: PS/2 mouse device common for all mice
512[ 2.020621] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.025828] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.032318] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.040302] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.046595] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.053116] AMD IOMMUv2 functionality not available on this system
518[ 2.059526] TCP: cubic registered
519[ 2.063071] NET: Registered protocol family 10
520[ 2.068029] mip6: Mobile IPv6
521[ 2.071102] NET: Registered protocol family 17
522[ 2.075721] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.084472] mpls_gso: MPLS GSO support
524[ 2.089207] registered taskstats version 1
525[ 2.094167] rtc_cmos rtc_cmos: setting system clock to 2015-07-02 01:39:18 UTC (1435801158)
526[ 2.102747] PM: Hibernation image not present or could not be loaded.
527[ 2.104574] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.112573] Write protecting the kernel read-only data: 8192k
529[ 2.121903] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.130629] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.154652] systemd-udevd[99]: starting version 215
532[ 2.160488] random: systemd-udevd urandom read with 4 bits of entropy available
533[ 2.190375] ACPI: bus type USB registered
534[ 2.194669] usbcore: registered new interface driver usbfs
535[ 2.200335] usbcore: registered new interface driver hub
536[ 2.205935] usbcore: registered new device driver usb
537[ 2.205968] pps_core: LinuxPPS API ver. 1 registered
538[ 2.205970] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
539[ 2.225970] PTP clock support registered
540[ 2.230289] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
541[ 2.237316] tg3.c:v3.137 (May 11, 2014)
542[ 2.241288] tg3 0000:02:00.0: enabling device (0004 -> 0006)
543[ 2.247296] ehci-pci: EHCI PCI platform driver
544[ 2.247321] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.257895] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
546[ 2.258020] ehci-pci 0000:00:02.1: EHCI Host Controller
547[ 2.258040] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
548[ 2.258061] ehci-pci 0000:00:02.1: debug port 1
549[ 2.258102] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
550[ 2.258133] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
551[ 2.267645] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
552[ 2.267718] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
553[ 2.267720] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
554[ 2.267722] usb usb1: Product: EHCI Host Controller
555[ 2.267723] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
556[ 2.267724] usb usb1: SerialNumber: 0000:00:02.1
557[ 2.267950] hub 1-0:1.0: USB hub found
558[ 2.267959] hub 1-0:1.0: 10 ports detected
559[ 2.331761] ohci-pci: OHCI PCI platform driver
560[ 2.336544] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.342251] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.349833] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.386762] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.397196] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.407053] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.409658] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
567[ 2.409660] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
568[ 2.409662] usb usb2: Product: OHCI PCI host controller
569[ 2.409663] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
570[ 2.409664] usb usb2: SerialNumber: 0000:00:02.0
571[ 2.409946] hub 2-0:1.0: USB hub found
572[ 2.409960] hub 2-0:1.0: 10 ports detected
573[ 2.453293] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
574[ 2.460200] tg3 0000:03:00.0: enabling device (0004 -> 0006)
575[ 2.466164] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
576[ 2.516078] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.526505] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.536376] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.544336] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.558437] FS-Cache: Loaded
581[ 2.565043] RPC: Registered named UNIX socket transport module.
582[ 2.571776] RPC: Registered udp transport module.
583[ 2.577852] RPC: Registered tcp transport module.
584[ 2.583952] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.596280] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.614401] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.659638] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.723485] tsc: Refined TSC clocksource calibration: 1909.786 MHz
589[ 3.727230] Switched to clocksource tsc
590[ 4.234763] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.241411] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.248366] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 8.419475] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 8.433651] systemd[1]: Detected architecture 'x86-64'.
595[ 9.928489] systemd[1]: Inserted module 'autofs4'
596[ 9.954158] systemd[1]: Set hostname to <cb-test-tgt>.
597[ 10.102650] random: nonblocking pool is initialized
598[ 11.975863] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 11.988754] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 12.004331] systemd[1]: Expecting device dev-ttyS0.device...
601[ 12.020409] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 12.028423] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 12.036148] systemd[1]: Starting Remote File Systems (Pre).
604[ 12.052284] systemd[1]: Reached target Remote File Systems (Pre).
605[ 12.058528] systemd[1]: Starting Encrypted Volumes.
606[ 12.072275] systemd[1]: Reached target Encrypted Volumes.
607[ 12.077811] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 12.085987] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 12.094044] systemd[1]: Starting Paths.
610[ 12.108351] systemd[1]: Reached target Paths.
611[ 12.112943] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
612[ 12.136278] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
613[ 12.145840] systemd[1]: Starting Swap.
614[ 12.160254] systemd[1]: Reached target Swap.
615[ 12.164661] systemd[1]: Starting Root Slice.
616[ 12.176237] systemd[1]: Created slice Root Slice.
617[ 12.181056] systemd[1]: Starting User and Session Slice.
618[ 12.196252] systemd[1]: Created slice User and Session Slice.
619[ 12.202137] systemd[1]: Starting Delayed Shutdown Socket.
620[ 12.216238] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 12.222133] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 12.240214] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 12.247326] systemd[1]: Starting Journal Socket (/dev/log).
624[ 12.264220] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 12.270286] systemd[1]: Starting udev Kernel Socket.
626[ 12.284217] systemd[1]: Listening on udev Kernel Socket.
627[ 12.290772] systemd[1]: Starting udev Control Socket.
628[ 12.308200] systemd[1]: Listening on udev Control Socket.
629[ 12.313751] systemd[1]: Starting Journal Socket.
630[ 12.328190] systemd[1]: Listening on Journal Socket.
631[ 12.333302] systemd[1]: Starting System Slice.
632[ 12.348177] systemd[1]: Created slice System Slice.
633[ 12.353175] systemd[1]: Starting system-getty.slice.
634[ 12.368181] systemd[1]: Created slice system-getty.slice.
635[ 12.373722] systemd[1]: Starting system-serial\x2dgetty.slice.
636[ 12.388162] systemd[1]: Created slice system-serial\x2dgetty.slice.
637[ 12.394591] systemd[1]: Starting Increase datagram queue length...
638[ 12.413410] systemd[1]: Mounting Debug File System...
639[ 12.429395] systemd[1]: Mounting POSIX Message Queue File System...
640[ 14.491705] systemd[1]: Starting Load Kernel Modules...
641[ 15.196303] systemd[1]: Started Set Up Additional Binary Formats.
642[ 15.216377] systemd[1]: Starting Create list of required static device nodes for the current kernel...
643[ 15.240143] systemd[1]: Starting udev Coldplug all Devices...
644[ 15.256153] systemd[1]: Mounting Huge Pages File System...
645[ 15.271867] systemd[1]: Starting Slices.
646[ 15.283194] systemd[1]: Reached target Slices.
647[ 15.287839] systemd[1]: Starting Remount Root and Kernel File Systems...
648[ 15.315179] systemd[1]: Mounted POSIX Message Queue File System.
649[ 15.331146] systemd[1]: Mounted Debug File System.
650[ 15.347162] systemd[1]: Started Increase datagram queue length.
651[ 15.356395] systemd[1]: Starting Syslog Socket.
652[ 15.371190] systemd[1]: Listening on Syslog Socket.
653[ 15.376272] systemd[1]: Starting Sockets.
654[ 15.391114] systemd[1]: Reached target Sockets.
655[ 15.395789] systemd[1]: Starting Journal Service...
656[ 15.419177] systemd[1]: Started Journal Service.
657[ 18.278543] systemd-udevd[190]: starting version 215
658[ 18.312367] systemd-journald[174]: Received request to flush runtime journal from PID 1
659[ 28.467324] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
660[ 28.968813] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
661[ 28.976755] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
662[ 29.015947] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
663[ 29.024492] ACPI: Power Button [PWRB]
664[ 29.028333] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
665[ 29.035850] ACPI: Power Button [PWRF]
666[ 29.262278] FDC 0 is a post-1991 82077
667[ 29.282082] EDAC MC: Ver: 3.0.0
668[ 29.699633] SCSI subsystem initialized
669[ 29.715970] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
670[ 29.721302] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
671[ 29.741803] MCE: In-kernel MCE decoding enabled.
672[ 29.791241] acpi-cpufreq: overriding BIOS provided _PSD data
673[ 30.074949] libata version 3.00 loaded.
674[ 30.078306] input: PC Speaker as /devices/platform/pcspkr/input/input4
675[ 30.148327] AMD64 EDAC driver v3.4.0
676[ 30.152141] EDAC amd64: DRAM ECC enabled.
677[ 30.156279] EDAC amd64: F10h detected (node 0).
678[ 30.160921] EDAC MC: DCT0 chip selects:
679[ 30.160926] EDAC amd64: MC: 0: 0MB 1: 0MB
680[ 30.165718] EDAC amd64: MC: 2: 0MB 3: 0MB
681[ 30.170513] EDAC amd64: MC: 4: 0MB 5: 0MB
682[ 30.175313] EDAC amd64: MC: 6: 1024MB 7: 1024MB
683[ 30.180112] EDAC MC: DCT1 chip selects:
684[ 30.180113] EDAC amd64: MC: 0: 0MB 1: 0MB
685[ 30.184908] EDAC amd64: MC: 2: 0MB 3: 0MB
686[ 30.189697] EDAC amd64: MC: 4: 0MB 5: 0MB
687[ 30.194491] EDAC amd64: MC: 6: 1024MB 7: 1024MB
688[ 30.199289] EDAC amd64: using x4 syndromes.
689[ 30.203591] EDAC amd64: MCT channel count: 2
690[ 30.208132] EDAC amd64: CS6: Registered DDR2 RAM
691[ 30.212928] EDAC amd64: CS7: Registered DDR2 RAM
692[ 30.218202] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
693[ 30.228096] EDAC amd64: DRAM ECC enabled.
694[ 30.232298] EDAC amd64: F10h detected (node 1).
695[ 30.236977] EDAC MC: DCT0 chip selects:
696[ 30.236981] EDAC amd64: MC: 0: 1024MB 1: 0MB
697[ 30.241795] EDAC amd64: MC: 2: 0MB 3: 0MB
698[ 30.246602] EDAC amd64: MC: 4: 0MB 5: 0MB
699[ 30.251409] EDAC amd64: MC: 6: 0MB 7: 0MB
700[ 30.256207] EDAC MC: DCT1 chip selects:
701[ 30.256210] EDAC amd64: MC: 0: 0MB 1: 0MB
702[ 30.261012] EDAC amd64: MC: 2: 0MB 3: 0MB
703[ 30.265832] EDAC amd64: MC: 4: 0MB 5: 0MB
704[ 30.270635] EDAC amd64: MC: 6: 0MB 7: 0MB
705[ 30.275412] EDAC amd64: using x4 syndromes.
706[ 30.279694] EDAC amd64: MCT channel count: 1
707[ 30.284107] EDAC amd64: CS0: Registered DDR2 RAM
708[ 30.289107] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
709[ 30.298982] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
710[ 30.341106] pata_amd 0000:00:06.0: version 0.4.1
711[ 30.342052] scsi0 : pata_amd
712[ 30.345458] scsi1 : pata_amd
713[ 30.348549] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
714[ 30.355649] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
715[ 30.405058] sata_nv 0000:00:07.0: version 3.5
716[ 30.405441] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
717[ 30.412153] scsi2 : sata_nv
718[ 30.415312] scsi3 : sata_nv
719[ 30.418338] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
720[ 30.425566] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
721[ 30.432981] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
722[ 30.439262] scsi4 : sata_nv
723[ 30.442343] scsi5 : sata_nv
724[ 30.445311] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
725[ 30.452543] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
726[ 30.741799] ata3: SATA link down (SStatus 0 SControl 300)
727[ 30.769770] ata5: SATA link down (SStatus 0 SControl 300)
728[ 31.057687] ata4: SATA link down (SStatus 0 SControl 300)
729[ 31.150365] kvm: Nested Virtualization enabled
730[ 31.154951] kvm: Nested Paging enabled
731[ 31.373581] ata6: SATA link down (SStatus 0 SControl 300)
732[ 69.211235] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****