blob: 49e2f3df788bbdd12bd8b8358b286d907d0c6476 [file] [log] [blame]
Paul Menzel6c835112015-10-27 23:39:05 +01001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 4.1.0-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-1) ) #1 SMP Debian 4.1.1-1~exp1 (2015-07-07)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7f9cfff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000c7f9d000-0x00000000dfffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.1-899-g85c39a4 10/27/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000 mask F80000000 write-back
26[ 0.000000] 1 base 080000000 mask FC0000000 write-back
27[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 000000021f000000 aka 8688M
34[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
35[ 0.000000] found SMP MP-table at [mem 0x000f7230-0x000f723f] mapped at [c00f7230]
36[ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
37[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
38[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
39[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
40[ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
41[ 0.000000] [mem 0x37600000-0x377fffff] page 2M
42[ 0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
43[ 0.000000] [mem 0x20000000-0x375fffff] page 2M
44[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
45[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
46[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
47[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
48[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
49[ 0.000000] BRK [0x0182b000, 0x0182bfff] PGTABLE
50[ 0.000000] BRK [0x0182c000, 0x0182dfff] PGTABLE
51[ 0.000000] BRK [0x0182e000, 0x0182efff] PGTABLE
52[ 0.000000] BRK [0x0182f000, 0x0182ffff] PGTABLE
53[ 0.000000] RAMDISK: [mem 0x35f7a000-0x36fb4fff]
54[ 0.000000] ACPI: Early table checksum verification disabled
55[ 0.000000] ACPI: RSDP 0x00000000000F7430 000024 (v02 CORE )
56[ 0.000000] ACPI: XSDT 0x00000000C7FB80E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: FACP 0x00000000C7FBA740 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
58[ 0.000000] ACPI: DSDT 0x00000000C7FB8280 0024B3 (v02 ASROCK COREBOOT 00010001 INTL 20140926)
59[ 0.000000] ACPI: FACS 0x00000000C7FB8240 000040
60[ 0.000000] ACPI: SSDT 0x00000000C7FBA840 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
61[ 0.000000] ACPI: TCPA 0x00000000C7FBA890 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: APIC 0x00000000C7FBA8D0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: HEST 0x00000000C7FBA930 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: SSDT 0x00000000C7FBA960 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
65[ 0.000000] ACPI: SSDT 0x00000000C7FBBFF0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
66[ 0.000000] ACPI: HPET 0x00000000C7FBC3D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: Local APIC address 0xfee00000
68[ 0.000000] 7798MB HIGHMEM available.
69[ 0.000000] 889MB LOWMEM available.
70[ 0.000000] mapped low ram: 0 - 379fe000
71[ 0.000000] low ram: 0 - 379fe000
72[ 0.000000] Zone ranges:
73[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
74[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
75[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000021effffff]
76[ 0.000000] Movable zone start for each node
77[ 0.000000] Early memory node ranges
78[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
79[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c7f9cfff]
80[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
81[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
82[ 0.000000] On node 0 totalpages: 1994555
83[ 0.000000] free_area_init_node: node 0, pgdat c16debc0, node_mem_map f131e024
84[ 0.000000] DMA zone: 36 pages used for memmap
85[ 0.000000] DMA zone: 0 pages reserved
86[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
87[ 0.000000] Normal zone: 1967 pages used for memmap
88[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
89[ 0.000000] HighMem zone: 1766815 pages, LIFO batch:31
90[ 0.000000] Using APIC driver default
91[ 0.000000] ACPI: PM-Timer IO Port: 0x808
92[ 0.000000] ACPI: Local APIC address 0xfee00000
93[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
94[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
95[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
96[ 0.000000] ACPI: IRQ0 used by override.
97[ 0.000000] ACPI: IRQ9 used by override.
98[ 0.000000] Using ACPI (MADT) for SMP configuration information
99[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
100[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
101[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
102[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
103[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
104[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
105[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
106[ 0.000000] Booting paravirtualized kernel on bare hardware
107[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
108[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
109[ 0.000000] PERCPU: Embedded 19 pages/cpu @f79c6000 s45452 r0 d32372 u77824
110[ 0.000000] pcpu-alloc: s45452 r0 d32372 u77824 alloc=19*4096
111[ 0.000000] pcpu-alloc: [0] 0 [0] 1
112[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1992552
113[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.1.0-trunk-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0
114[ 0.000000] PCIe ASPM is forcibly enabled
115[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
116[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
117[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
118[ 0.000000] Initializing CPU#0
119[ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000)
120[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
121[ 0.000000] Memory: 7873940K/7978220K available (5004K kernel code, 625K rwdata, 1488K rodata, 676K init, 468K bss, 104280K reserved, 0K cma-reserved, 7067260K highmem)
122[ 0.000000] virtual kernel memory layout:
123 fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
124 pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
125 vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
126 lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
127 .init : 0xc16f7000 - 0xc17a0000 ( 676 kB)
128 .data : 0xc14e345a - 0xc16f54c0 (2120 kB)
129 .text : 0xc1000000 - 0xc14e345a (5005 kB)
130[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
131[ 0.000000] Hierarchical RCU implementation.
132[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
133[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
134[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
135[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
136[ 0.000000] CPU 0 irqstacks, hard=f742a000 soft=f742c000
137[ 0.000000] spurious 8259A interrupt: IRQ7.
138[ 0.000000] Console: colour VGA+ 80x25
139[ 0.000000] console [tty0] enabled
140[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
141[ 0.000000] hpet clockevent registered
142[ 0.000000] tsc: Fast TSC calibration using PIT
143[ 0.000000] tsc: Detected 1600.016 MHz processor
144[ 0.000058] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.03 BogoMIPS (lpj=6400064)
145[ 0.000065] pid_max: default: 32768 minimum: 301
146[ 0.000084] ACPI: Core revision 20150410
147[ 0.006111] ACPI: All ACPI Tables successfully acquired
148[ 0.006157] Security Framework initialized
149[ 0.006177] AppArmor: AppArmor disabled by boot time parameter
150[ 0.006181] Yama: disabled by default; enable with sysctl kernel.yama.*
151[ 0.006216] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
152[ 0.006221] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
153[ 0.006610] Initializing cgroup subsys blkio
154[ 0.006617] Initializing cgroup subsys memory
155[ 0.006627] Initializing cgroup subsys devices
156[ 0.006633] Initializing cgroup subsys freezer
157[ 0.006641] Initializing cgroup subsys net_cls
158[ 0.006647] Initializing cgroup subsys perf_event
159[ 0.006652] Initializing cgroup subsys net_prio
160[ 0.006692] CPU: Physical Processor ID: 0
161[ 0.006696] CPU: Processor Core ID: 0
162[ 0.006702] mce: CPU supports 6 MCE banks
163[ 0.006721] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
164[ 0.006724] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
165[ 0.007072] Freeing SMP alternatives memory: 24K (c17a0000 - c17a6000)
166[ 0.009485] ftrace: allocating 21713 entries in 43 pages
167[ 0.029289] Enabling APIC mode: Flat. Using 1 I/O APICs
168[ 0.029695] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
169[ 0.176226] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
170[ 0.176289] Performance Events: AMD PMU driver.
171[ 0.176299] ... version: 0
172[ 0.176303] ... bit width: 48
173[ 0.176305] ... generic registers: 4
174[ 0.176308] ... value mask: 0000ffffffffffff
175[ 0.176311] ... max period: 00007fffffffffff
176[ 0.176313] ... fixed-purpose events: 0
177[ 0.176316] ... event mask: 000000000000000f
178[ 0.177588] CPU 1 irqstacks, hard=f752e000 soft=f7530000
179[ 0.177594] x86: Booting SMP configuration:
180[ 0.177597] .... node #0, CPUs: #1
181[ 0.188601] Initializing CPU#1
182[ 0.190804] x86: Booted up 1 node, 2 CPUs
183[ 0.190811] smpboot: Total of 2 processors activated (6400.06 BogoMIPS)
184[ 0.191714] devtmpfs: initialized
185[ 0.192531] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
186[ 0.192729] pinctrl core: initialized pinctrl subsystem
187[ 0.193015] NET: Registered protocol family 16
188[ 0.203145] cpuidle: using governor ladder
189[ 0.212507] cpuidle: using governor menu
190[ 0.212887] ACPI: bus type PCI registered
191[ 0.212894] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
192[ 0.213295] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
193[ 0.213299] bios32_service(0x49435024): not present
194[ 0.213303] PCI: Using configuration type 1 for base access
195[ 0.213305] PCI: Using configuration type 1 for extended access
196[ 0.224598] ACPI: Added _OSI(Module Device)
197[ 0.224607] ACPI: Added _OSI(Processor Device)
198[ 0.224611] ACPI: Added _OSI(3.0 _SCP Extensions)
199[ 0.224615] ACPI: Added _OSI(Processor Aggregator Device)
200[ 0.226892] ACPI: Executed 2 blocks of module-level executable AML code
201[ 0.231302] ACPI: Interpreter enabled
202[ 0.231326] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
203[ 0.231353] ACPI: (supports S0 S1 S3 S4 S5)
204[ 0.231357] ACPI: Using IOAPIC for interrupt routing
205[ 0.231390] HEST: Table parsing has been initialized.
206[ 0.231398] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
207[ 0.238555] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
208[ 0.238569] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
209[ 0.238725] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
210[ 0.239253] PCI host bridge to bus 0000:00
211[ 0.239261] pci_bus 0000:00: root bus resource [bus 00-ff]
212[ 0.239267] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
213[ 0.239271] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
214[ 0.239277] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
215[ 0.239281] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
216[ 0.239297] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
217[ 0.239507] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
218[ 0.239527] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
219[ 0.239539] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
220[ 0.239550] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
221[ 0.239615] pci 0000:00:01.0: supports D1 D2
222[ 0.239704] pci 0000:00:01.0: System wakeup disabled by ACPI
223[ 0.239798] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
224[ 0.239815] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
225[ 0.239891] pci 0000:00:01.1: supports D1 D2
226[ 0.239977] pci 0000:00:01.1: System wakeup disabled by ACPI
227[ 0.240171] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
228[ 0.240196] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
229[ 0.240211] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
230[ 0.240237] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
231[ 0.240253] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
232[ 0.240268] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
233[ 0.240283] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
234[ 0.240557] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
235[ 0.240579] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
236[ 0.240740] pci 0000:00:12.0: System wakeup disabled by ACPI
237[ 0.240902] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
238[ 0.240928] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
239[ 0.241033] pci 0000:00:12.2: supports D1 D2
240[ 0.241038] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
241[ 0.241129] pci 0000:00:12.2: System wakeup disabled by ACPI
242[ 0.241226] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
243[ 0.241247] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
244[ 0.241408] pci 0000:00:13.0: System wakeup disabled by ACPI
245[ 0.241574] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
246[ 0.241599] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
247[ 0.241704] pci 0000:00:13.2: supports D1 D2
248[ 0.241709] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
249[ 0.241797] pci 0000:00:13.2: System wakeup disabled by ACPI
250[ 0.241963] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
251[ 0.242208] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
252[ 0.242238] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
253[ 0.242327] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
254[ 0.242565] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
255[ 0.242878] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
256[ 0.243013] pci 0000:00:14.4: System wakeup disabled by ACPI
257[ 0.243158] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
258[ 0.243179] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
259[ 0.243342] pci 0000:00:14.5: System wakeup disabled by ACPI
260[ 0.243503] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
261[ 0.243594] pci 0000:00:15.0: supports D1 D2
262[ 0.243686] pci 0000:00:15.0: System wakeup disabled by ACPI
263[ 0.243846] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
264[ 0.243944] pci 0000:00:15.1: supports D1 D2
265[ 0.244036] pci 0000:00:15.1: System wakeup disabled by ACPI
266[ 0.244170] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
267[ 0.244362] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
268[ 0.244536] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
269[ 0.244712] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
270[ 0.244908] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
271[ 0.245083] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
272[ 0.245258] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
273[ 0.245431] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
274[ 0.245872] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
275[ 0.245888] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
276[ 0.245893] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
277[ 0.245898] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
278[ 0.245903] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
279[ 0.245993] pci 0000:00:15.0: PCI bridge to [bus 02]
280[ 0.246173] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
281[ 0.246203] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
282[ 0.246244] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
283[ 0.246271] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
284[ 0.246387] pci 0000:03:00.0: supports D1 D2
285[ 0.246391] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.252543] pci 0000:00:15.1: PCI bridge to [bus 03]
287[ 0.252562] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
288[ 0.252577] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
289[ 0.252620] pci_bus 0000:00: on NUMA node 0
290[ 0.253645] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
291[ 0.253888] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
292[ 0.254064] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
293[ 0.254161] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
294[ 0.254257] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
295[ 0.254353] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
296[ 0.254444] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
297[ 0.254540] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
298[ 0.254805] ACPI: Enabled 6 GPEs in block 00 to 1F
299[ 0.255295] vgaarb: setting as boot device: PCI:0000:00:01.0
300[ 0.255305] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
301[ 0.255318] vgaarb: loaded
302[ 0.255322] vgaarb: bridge control possible 0000:00:01.0
303[ 0.255670] PCI: Using ACPI for IRQ routing
304[ 0.255683] PCI: pci_cache_line_size set to 64 bytes
305[ 0.255844] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
306[ 0.255850] e820: reserve RAM buffer [mem 0xc7f9d000-0xc7ffffff]
307[ 0.255854] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
308[ 0.256251] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
309[ 0.256260] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
310[ 0.258425] Switched to clocksource hpet
311[ 0.272045] pnp: PnP ACPI init
312[ 0.272469] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
313[ 0.272759] pnp: PnP ACPI: found 1 devices
314[ 0.272767] PnPBIOS: Disabled by ACPI PNP
315[ 0.317171] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
316[ 0.317239] pci 0000:00:14.4: PCI bridge to [bus 01]
317[ 0.317260] pci 0000:00:15.0: PCI bridge to [bus 02]
318[ 0.317279] pci 0000:00:15.1: PCI bridge to [bus 03]
319[ 0.317285] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
320[ 0.317298] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
321[ 0.317310] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
322[ 0.317315] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
323[ 0.317320] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
324[ 0.317325] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
325[ 0.317330] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
326[ 0.317334] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
327[ 0.317338] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
328[ 0.317342] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
329[ 0.317347] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
330[ 0.317351] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
331[ 0.317527] NET: Registered protocol family 2
332[ 0.317980] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
333[ 0.318021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
334[ 0.318071] TCP: Hash tables configured (established 8192 bind 8192)
335[ 0.318121] UDP hash table entries: 512 (order: 2, 16384 bytes)
336[ 0.318136] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
337[ 0.318371] NET: Registered protocol family 1
338[ 0.318408] pci 0000:00:01.0: Video device with shadowed ROM
339[ 0.375940] PCI: CLS 64 bytes, default 64
340[ 0.376074] Unpacking initramfs...
341[ 1.037936] Freeing initrd memory: 16620K (f5f7a000 - f6fb5000)
342[ 1.038375] microcode: CPU0: patch_level=0x05000119
343[ 1.038498] microcode: CPU1: patch_level=0x05000119
344[ 1.038684] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
345[ 1.038695] LVT offset 0 assigned for vector 0x400
346[ 1.038821] perf: AMD IBS detected (0x000000ff)
347[ 1.039643] futex hash table entries: 512 (order: 3, 32768 bytes)
348[ 1.039802] audit: initializing netlink subsys (disabled)
349[ 1.039840] audit: type=2000 audit(1445985501.928:1): initialized
350[ 1.040740] HugeTLB registered 2 MB page size, pre-allocated 0 pages
351[ 1.040785] zpool: loaded
352[ 1.041127] VFS: Disk quotas dquot_6.6.0
353[ 1.041275] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
354[ 1.042819] alg: No test for stdrng (krng)
355[ 1.042900] bounce: pool size: 64 pages
356[ 1.043032] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
357[ 1.043190] io scheduler noop registered
358[ 1.043196] io scheduler deadline registered
359[ 1.043215] io scheduler cfq registered (default)
360[ 1.044459] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
361[ 1.044469] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
362[ 1.044504] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
363[ 1.044509] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
364[ 1.044516] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
365[ 1.044532] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
366[ 1.044572] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
367[ 1.044693] GHES: Failed to enable APEI firmware first mode.
368[ 1.044705] isapnp: ISA Plug & Play support disabled
369[ 1.045048] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
370[ 1.065800] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
371[ 1.067482] Linux agpgart interface v0.103
372[ 1.068257] i8042: PNP: No PS/2 controller found. Probing ports directly.
373[ 1.072322] serio: i8042 KBD port at 0x60,0x64 irq 1
374[ 1.072347] serio: i8042 AUX port at 0x60,0x64 irq 12
375[ 1.073229] mousedev: PS/2 mouse device common for all mice
376[ 1.073454] rtc_cmos 00:00: RTC can wake from S4
377[ 1.073862] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
378[ 1.073904] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
379[ 1.073937] ledtrig-cpu: registered to indicate activity on CPUs
380[ 1.074539] NET: Registered protocol family 10
381[ 1.075045] mip6: Mobile IPv6
382[ 1.075061] NET: Registered protocol family 17
383[ 1.075074] mpls_gso: MPLS GSO support
384[ 1.075657] Using IPI No-Shortcut mode
385[ 1.076385] registered taskstats version 1
386[ 1.077270] rtc_cmos 00:00: setting system clock to 2015-10-27 22:38:22 UTC (1445985502)
387[ 1.077368] PM: Hibernation image not present or could not be loaded.
388[ 1.077983] Freeing unused kernel memory: 676K (c16f7000 - c17a0000)
389[ 1.078228] Write protecting the kernel text: 5008k
390[ 1.078369] Write protecting the kernel read-only data: 1492k
391[ 1.078372] NX-protecting the kernel data: 3184k
392[ 1.171943] systemd-udevd[66]: starting version 215
393[ 1.172703] random: systemd-udevd urandom read with 0 bits of entropy available
394[ 1.198085] SCSI subsystem initialized
395[ 1.203698] ACPI: bus type USB registered
396[ 1.203768] usbcore: registered new interface driver usbfs
397[ 1.203796] usbcore: registered new interface driver hub
398[ 1.203838] usbcore: registered new device driver usb
399[ 1.204888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
400[ 1.205298] ehci-pci: EHCI PCI platform driver
401[ 1.205740] QUIRK: Enable AMD PLL fix
402[ 1.205784] ehci-pci 0000:00:12.2: EHCI Host Controller
403[ 1.205799] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
404[ 1.205809] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
405[ 1.205900] ehci-pci 0000:00:12.2: debug port 1
406[ 1.205984] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
407[ 1.206072] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
408[ 1.207720] libata version 3.00 loaded.
409[ 1.215020] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
410[ 1.215133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
411[ 1.215139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
412[ 1.215144] usb usb1: Product: EHCI Host Controller
413[ 1.215148] usb usb1: Manufacturer: Linux 4.1.0-trunk-686-pae ehci_hcd
414[ 1.215152] usb usb1: SerialNumber: 0000:00:12.2
415[ 1.215855] hub 1-0:1.0: USB hub found
416[ 1.216100] hub 1-0:1.0: 5 ports detected
417[ 1.216866] ehci-pci 0000:00:13.2: EHCI Host Controller
418[ 1.216882] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
419[ 1.216892] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
420[ 1.216977] ehci-pci 0000:00:13.2: debug port 1
421[ 1.217033] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
422[ 1.218092] thermal LNXTHERM:00: registered as thermal_zone0
423[ 1.218098] ACPI: Thermal Zone [TZ00] (44 C)
424[ 1.227888] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
425[ 1.228812] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf823e000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26
426[ 1.228818] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
427[ 1.228875] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
428[ 1.229001] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
429[ 1.229006] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
430[ 1.229011] usb usb2: Product: EHCI Host Controller
431[ 1.229015] usb usb2: Manufacturer: Linux 4.1.0-trunk-686-pae ehci_hcd
432[ 1.229019] usb usb2: SerialNumber: 0000:00:13.2
433[ 1.229787] hub 2-0:1.0: USB hub found
434[ 1.229809] hub 2-0:1.0: 5 ports detected
435[ 1.230897] ohci-pci: OHCI PCI platform driver
436[ 1.231302] ohci-pci 0000:00:12.0: OHCI PCI host controller
437[ 1.231317] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
438[ 1.231383] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
439[ 1.290941] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
440[ 1.290951] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
441[ 1.290956] usb usb3: Product: OHCI PCI host controller
442[ 1.290960] usb usb3: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
443[ 1.290964] usb usb3: SerialNumber: 0000:00:12.0
444[ 1.291585] hub 3-0:1.0: USB hub found
445[ 1.291611] hub 3-0:1.0: 5 ports detected
446[ 1.292268] ohci-pci 0000:00:13.0: OHCI PCI host controller
447[ 1.292282] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
448[ 1.292330] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
449[ 1.350936] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
450[ 1.350947] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
451[ 1.350951] usb usb4: Product: OHCI PCI host controller
452[ 1.350956] usb usb4: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
453[ 1.350960] usb usb4: SerialNumber: 0000:00:13.0
454[ 1.351595] hub 4-0:1.0: USB hub found
455[ 1.351626] hub 4-0:1.0: 5 ports detected
456[ 1.352276] ohci-pci 0000:00:14.5: OHCI PCI host controller
457[ 1.352289] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
458[ 1.352347] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
459[ 1.410885] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
460[ 1.410895] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
461[ 1.410900] usb usb5: Product: OHCI PCI host controller
462[ 1.410904] usb usb5: Manufacturer: Linux 4.1.0-trunk-686-pae ohci_hcd
463[ 1.410908] usb usb5: SerialNumber: 0000:00:14.5
464[ 1.411541] hub 5-0:1.0: USB hub found
465[ 1.411567] hub 5-0:1.0: 2 ports detected
466[ 1.411854] ahci 0000:00:11.0: version 3.0
467[ 1.412512] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
468[ 1.412520] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
469[ 1.417293] scsi host0: ahci
470[ 1.417539] scsi host1: ahci
471[ 1.417739] scsi host2: ahci
472[ 1.417947] scsi host3: ahci
473[ 1.418201] scsi host4: ahci
474[ 1.418477] scsi host5: ahci
475[ 1.418613] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
476[ 1.418620] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
477[ 1.418625] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
478[ 1.418630] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
479[ 1.418635] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
480[ 1.418640] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
481[ 1.538812] usb 2-1: new high-speed USB device number 2 using ehci-pci
482[ 1.674336] usb 2-1: New USB device found, idVendor=0bda, idProduct=8172
483[ 1.674353] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
484[ 1.674362] usb 2-1: Product: RTL8191S WLAN Adapter
485[ 1.674370] usb 2-1: Manufacturer: Manufacturer Realtek
486[ 1.674378] usb 2-1: SerialNumber: 00e04c000001
487[ 1.730811] usb 3-2: new low-speed USB device number 2 using ohci-pci
488[ 1.738803] ata5: SATA link down (SStatus 0 SControl 300)
489[ 1.738858] ata3: SATA link down (SStatus 0 SControl 300)
490[ 1.738901] ata2: SATA link down (SStatus 0 SControl 300)
491[ 1.738932] ata6: SATA link down (SStatus 0 SControl 300)
492[ 1.738963] ata1: SATA link down (SStatus 0 SControl 300)
493[ 1.897188] usb 3-2: New USB device found, idVendor=1241, idProduct=1122
494[ 1.897198] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
495[ 1.901728] hidraw: raw HID events driver (C) Jiri Kosina
496[ 1.910256] usbcore: registered new interface driver usbhid
497[ 1.910264] usbhid: USB HID core driver
498[ 1.910562] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
499[ 1.910979] ata4.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
500[ 1.910986] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
501[ 1.911484] ata4.00: configured for UDMA/100
502[ 1.911806] scsi 3:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
503[ 1.912362] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input2
504[ 1.912526] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
505[ 1.921358] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
506[ 1.921509] sd 3:0:0:0: [sda] Write Protect is off
507[ 1.921515] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
508[ 1.921562] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
509[ 1.922393] sda: sda1 sda2
510[ 1.923325] sd 3:0:0:0: [sda] Attached SCSI disk
511[ 1.924586] sd 3:0:0:0: Attached scsi generic sg0 type 0
512[ 1.981559] device-mapper: uevent: version 1.0.3
513[ 1.981722] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
514[ 1.994659] usb 4-2: new low-speed USB device number 2 using ohci-pci
515[ 2.034786] tsc: Refined TSC clocksource calibration: 1599.999 MHz
516[ 2.034801] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns
517[ 2.165953] usb 4-2: New USB device found, idVendor=046d, idProduct=c312
518[ 2.165970] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
519[ 2.165979] usb 4-2: Product: USB Multimedia Keyboard
520[ 2.165988] usb 4-2: Manufacturer: LITEON Technology
521[ 2.174781] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/0003:046D:C312.0002/input/input3
522[ 2.231224] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0
523[ 3.035093] Switched to clocksource tsc
524[ 5.222363] NET: Registered protocol family 38
525[ 5.589127] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
526[ 6.282331] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
527[ 6.282501] systemd[1]: Found ordering cycle on basic.target/start
528[ 6.282509] systemd[1]: Found dependency on sysinit.target/start
529[ 6.282517] systemd[1]: Found dependency on rpcbind.service/start
530[ 6.282524] systemd[1]: Found dependency on network-online.target/start
531[ 6.282531] systemd[1]: Found dependency on network.target/start
532[ 6.282537] systemd[1]: Found dependency on systemd-networkd.service/start
533[ 6.282543] systemd[1]: Found dependency on dbus.service/start
534[ 6.282549] systemd[1]: Found dependency on basic.target/start
535[ 6.282555] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
536[ 6.282563] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
537[ 6.511537] random: nonblocking pool is initialized
538[ 7.438012] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
539[ 7.551962] lp: driver loaded but no devices found
540[ 7.564975] ppdev: user-space parallel port driver
541[ 7.568132] parport0: PC-style at 0x378 [PCSPP,EPP]
542[ 7.568148] parport0: irq 0 detected
543[ 7.658150] systemd-udevd[246]: starting version 215
544[ 7.658776] lp0: using parport0 (polling).
545[ 7.692734] fuse init (API version 7.23)
546[ 7.722097] w83627ehf: Found NCT6775F chip at 0x290
547[ 7.928637] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
548[ 7.928652] ACPI: Power Button [PWRB]
549[ 7.928764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
550[ 7.928769] ACPI: Power Button [PWRF]
551[ 7.935299] ACPI: acpi_idle registered with cpuidle
552[ 7.944627] acpi-cpufreq: overriding BIOS provided _PSD data
553[ 7.996847] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
554[ 7.997020] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
555[ 8.000812] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
556[ 8.000941] sp5100_tco: PCI Revision ID: 0x42
557[ 8.000988] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
558[ 8.001003] sp5100_tco: Last reboot was not triggered by watchdog.
559[ 8.001295] sp5100_tco: initialized (0xf82aab00). heartbeat=60 sec (nowayout=0)
560[ 8.031891] [drm] Initialized drm 1.1.0 20060810
561[ 8.066174] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
562[ 8.185220] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
563[ 8.286628] [drm] radeon kernel modesetting enabled.
564[ 8.351786] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
565[ 8.361346] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
566[ 8.361357] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
567[ 8.361363] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
568[ 8.361367] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
569[ 8.361372] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
570[ 8.361376] snd_hda_codec_realtek hdaudioC1D0: inputs:
571[ 8.361382] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
572[ 8.361387] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
573[ 8.361391] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
574[ 8.361396] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
575[ 8.369174] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
576[ 8.369210] [drm] register mmio base: 0xF0100000
577[ 8.369213] [drm] register mmio size: 262144
578[ 8.369298] ATOM BIOS: AMD
579[ 8.369383] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
580[ 8.369389] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
581[ 8.369393] [drm] Detected VRAM RAM=384M, BAR=256M
582[ 8.369396] [drm] RAM width 32bits DDR
583[ 8.375166] [TTM] Zone kernel: Available graphics memory: 412000 kiB
584[ 8.375175] [TTM] Zone highmem: Available graphics memory: 3945630 kiB
585[ 8.375178] [TTM] Initializing pool allocator
586[ 8.375190] [TTM] Initializing DMA pool allocator
587[ 8.375250] [drm] radeon: 384M of VRAM memory ready
588[ 8.375254] [drm] radeon: 1024M of GTT memory ready.
589[ 8.375282] [drm] Loading PALM Microcode
590[ 8.375444] kvm: Nested Virtualization enabled
591[ 8.375451] kvm: Nested Paging enabled
592[ 8.380828] r8169 0000:03:00.0 eth10: renamed from eth0
593[ 8.390841] systemd-udevd[277]: renamed network interface eth0 to eth10
594[ 8.405891] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
595[ 8.443201] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
596[ 8.561732] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
597[ 8.561754] [drm] Internal thermal controller without fan control
598[ 8.561869] [drm] Found smc ucode version: 0x00010601
599[ 8.576288] [drm] radeon: dpm initialized
600[ 8.606570] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
601[ 8.606677] [drm] GART: num cpu pages 262144, num gpu pages 262144
602[ 8.622488] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
603[ 8.623845] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
604[ 8.625244] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
605[ 8.626314] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
606[ 8.626529] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
607[ 8.626686] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
608[ 8.626848] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
609[ 8.626989] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
610[ 8.627735] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
611[ 8.640922] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
612[ 8.643179] radeon 0000:00:01.0: WB enabled
613[ 8.643193] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffac9c00
614[ 8.643199] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffac9c0c
615[ 8.645308] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8c32118
616[ 8.645845] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
617[ 8.645851] [drm] Driver supports precise vblank timestamp query.
618[ 8.645857] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
619[ 8.645914] radeon 0000:00:01.0: radeon: using MSI.
620[ 8.645956] [drm] radeon: irq initialized.
621[ 8.668205] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
622[ 8.669893] r8712u: register rtl8712_netdev_ops to netdev_ops
623[ 8.669908] usb 2-1: r8712u: USB_SPEED_HIGH with 4 endpoints
624[ 8.671705] usb 2-1: r8712u: Boot from EFUSE: Autoload OK
625[ 8.678333] [drm] ring test on 0 succeeded in 1 usecs
626[ 8.678350] [drm] ring test on 3 succeeded in 3 usecs
627[ 8.727431] [drm] ring test on 5 succeeded in 1 usecs
628[ 8.748417] [drm] UVD initialized successfully.
629[ 8.749836] [drm] ib test on ring 0 succeeded in 0 usecs
630[ 8.749889] [drm] ib test on ring 3 succeeded in 0 usecs
631[ 8.761020] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
632[ 9.088472] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
633[ 9.133777] systemd-journald[239]: Received request to flush runtime journal from PID 1
634[ 9.286526] [drm] ib test on ring 5 succeeded
635[ 9.310848] [drm] Radeon Display Connectors
636[ 9.310858] [drm] Connector 0:
637[ 9.310860] [drm] HDMI-A-1
638[ 9.310863] [drm] HPD1
639[ 9.310868] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
640[ 9.310870] [drm] Encoders:
641[ 9.310873] [drm] DFP1: INTERNAL_UNIPHY
642[ 9.310876] [drm] Connector 1:
643[ 9.310878] [drm] HDMI-A-2
644[ 9.310880] [drm] HPD2
645[ 9.310884] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
646[ 9.310886] [drm] Encoders:
647[ 9.310888] [drm] DFP2: INTERNAL_UNIPHY
648[ 9.310890] [drm] Connector 2:
649[ 9.310892] [drm] VGA-1
650[ 9.310896] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
651[ 9.310898] [drm] Encoders:
652[ 9.310900] [drm] CRT1: INTERNAL_KLDSCP_DAC1
653[ 9.351004] [drm] fb mappable at 0xE0478000
654[ 9.351011] [drm] vram apper at 0xE0000000
655[ 9.351014] [drm] size 5242880
656[ 9.351017] [drm] fb depth is 24
657[ 9.351020] [drm] pitch is 5120
658[ 9.351185] fbcon: radeondrmfb (fb0) is primary device
659[ 9.396525] Console: switching to colour frame buffer device 160x64
660[ 9.408436] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
661[ 9.408438] radeon 0000:00:01.0: registered panic notifier
662[ 9.434546] [drm] Initialized radeon 2.42.0 20080528 for 0000:00:01.0 on minor 0
663[ 9.474523] usb 2-1: r8712u: CustomerID = 0x000a
664[ 9.474537] usb 2-1: r8712u: MAC Address from efuse = 24:05:0f:36:2a:d8
665[ 9.474544] usb 2-1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
666[ 9.474651] usbcore: registered new interface driver r8712u
667[ 9.481828] usb 2-1: firmware: direct-loading firmware rtlwifi/rtl8712u.bin
668[ 9.490796] r8712u 2-1:1.0 wlan6: renamed from wlan0
669[ 9.502820] systemd-udevd[276]: renamed network interface wlan0 to wlan6
670[ 10.578474] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
671[ 10.900474] r8169 0000:03:00.0 eth10: link down
672[ 10.900959] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
673[ 25.899751] r8712u 2-1:1.0 wlan6: 1 RCR=0x153f00e
674[ 25.900736] r8712u 2-1:1.0 wlan6: 2 RCR=0x553f00e
675[ 26.010934] IPv6: ADDRCONF(NETDEV_UP): wlan6: link is not ready
676[ 36.534920] IPv6: ADDRCONF(NETDEV_CHANGE): wlan6: link becomes ready