Gitiles
Code Review Sign In
review.coreboot.org / board-status / 998aac3ffcf044285d0bc15dea660fc7e0029489 / . / asrock / e350m1 / 4.0-5054-gf584218 / 2013-12-20T20:56:20Z / kernel_log.txt
blob: c85e2dcb5b0a253bc8c96633a96c8f5757d22569 [file] [log] [blame]
Kevin O'Connor38e19bc2013-12-21 00:23:42 -0500[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Linux version 2.6.35.13-92.fc14.x86_64 (mockbuild@x86-13.phx2.fedoraproject.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Sat May 21 17:26:25 UTC 2011
4[ 0.000000] Command line: ro root=UUID=d798cd3b-e41b-479f-999e-b7b213521ec1 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
5[ 0.000000] BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
7[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
8[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
9[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7fbe000 (usable)
10[ 0.000000] BIOS-e820: 00000000c7fbe000 - 00000000e0000000 (reserved)
11[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
12[ 0.000000] BIOS-e820: 0000000100000000 - 000000021f000000 (usable)
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] DMI present.
15[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
16[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
17[ 0.000000] No AGP bridge found
18[ 0.000000] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000 mask F80000000 write-back
26[ 0.000000] 1 base 080000000 mask FC0000000 write-back
27[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 base 0FFF00000 mask FFFF00000 write-protect
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 000000021f000000 aka 8688M
34[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
35[ 0.000000] last_pfn = 0xc7fbe max_arch_pfn = 0x400000000
36[ 0.000000] initial memory mapped : 0 - 20000000
37[ 0.000000] found SMP MP-table at [ffff8800000f1f70] f1f70
38[ 0.000000] Using GB pages for direct mapping
39[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7fbe000
40[ 0.000000] 0000000000 - 00c0000000 page 1G
41[ 0.000000] 00c0000000 - 00c7e00000 page 2M
42[ 0.000000] 00c7e00000 - 00c7fbe000 page 4k
43[ 0.000000] kernel direct mapping tables up to c7fbe000 @ 8000-b000
44[ 0.000000] init_memory_mapping: 0000000100000000-000000021f000000
45[ 0.000000] 0100000000 - 0200000000 page 1G
46[ 0.000000] 0200000000 - 021f000000 page 2M
47[ 0.000000] kernel direct mapping tables up to 21f000000 @ a000-c000
48[ 0.000000] RAMDISK: 3732e000 - 37ff0000
49[ 0.000000] ACPI: RSDP 00000000000f1f50 00014 (v00 CORE )
50[ 0.000000] ACPI: RSDT 00000000c7fd2624 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
51[ 0.000000] ACPI: FACP 00000000c7fd51e8 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
52[ 0.000000] ACPI: DSDT 00000000c7fd26c8 02ADB (v02 ASROCK COREBOOT 00010001 INTL 20130823)
53[ 0.000000] ACPI: FACS 00000000c7fd51a8 00040
54[ 0.000000] ACPI: HPET 00000000c7fd52e0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
55[ 0.000000] ACPI: APIC 00000000c7fd5318 0005C (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: HEST 00000000c7fd5378 00028 (v01 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: SSDT 00000000c7fd53a0 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
58[ 0.000000] ACPI: SSDT 00000000c7fd6a30 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
59[ 0.000000] ACPI: SSDT 00000000c7fd6e10 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
60[ 0.000000] ACPI: Local APIC address 0xfee00000
61[ 0.000000] No NUMA configuration found
62[ 0.000000] Faking a node at 0000000000000000-000000021f000000
63[ 0.000000] Initmem setup node 0 0000000000000000-000000021f000000
64[ 0.000000] NODE_DATA [0000000100000000 - 0000000100013fff]
65[ 0.000000] bootmap [0000000100014000 - 0000000100057dff] pages 44
66[ 0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 021f000000]
67[ 0.000000] #0 [0001000000 - 0001e438b8] TEXT DATA BSS ==> [0001000000 - 0001e438b8]
68[ 0.000000] #1 [003732e000 - 0037ff0000] RAMDISK ==> [003732e000 - 0037ff0000]
69[ 0.000000] #2 [0001e44000 - 0001e44061] BRK ==> [0001e44000 - 0001e44061]
70[ 0.000000] #3 [000009fc00 - 00000f1f70] BIOS reserved ==> [000009fc00 - 00000f1f70]
71[ 0.000000] #4 [00000f1f70 - 00000f1f80] MP-table mpf ==> [00000f1f70 - 00000f1f80]
72[ 0.000000] #5 [00000f2094 - 0000100000] BIOS reserved ==> [00000f2094 - 0000100000]
73[ 0.000000] #6 [00000f1f80 - 00000f2094] MP-table mpc ==> [00000f1f80 - 00000f2094]
74[ 0.000000] #7 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
75[ 0.000000] #8 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
76[ 0.000000] #9 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
77[ 0.000000] #10 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
78[ 0.000000] #11 [0100000000 - 0100014000] NODE_DATA ==> [0100000000 - 0100014000]
79[ 0.000000] #12 [0100014000 - 0100058000] BOOTMAP ==> [0100014000 - 0100058000]
80[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880100600000-ffff8801071fffff] on node 0
81[ 0.000000] Zone PFN ranges:
82[ 0.000000] DMA 0x00000001 -> 0x00001000
83[ 0.000000] DMA32 0x00001000 -> 0x00100000
84[ 0.000000] Normal 0x00100000 -> 0x0021f000
85[ 0.000000] Movable zone start PFN for each node
86[ 0.000000] early_node_map[3] active PFN ranges
87[ 0.000000] 0: 0x00000001 -> 0x0000009f
88[ 0.000000] 0: 0x00000100 -> 0x000c7fbe
89[ 0.000000] 0: 0x00100000 -> 0x0021f000
90[ 0.000000] On node 0 totalpages: 1994588
91[ 0.000000] DMA zone: 56 pages used for memmap
92[ 0.000000] DMA zone: 104 pages reserved
93[ 0.000000] DMA zone: 3838 pages, LIFO batch:0
94[ 0.000000] DMA32 zone: 14280 pages used for memmap
95[ 0.000000] DMA32 zone: 800758 pages, LIFO batch:31
96[ 0.000000] Normal zone: 16072 pages used for memmap
97[ 0.000000] Normal zone: 1159480 pages, LIFO batch:31
98[ 0.000000] ACPI: PM-Timer IO Port: 0x808
99[ 0.000000] ACPI: Local APIC address 0xfee00000
100[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
101[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
102[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
103[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
104[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
105[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
106[ 0.000000] ACPI: IRQ0 used by override.
107[ 0.000000] ACPI: IRQ2 used by override.
108[ 0.000000] ACPI: IRQ9 used by override.
109[ 0.000000] Using ACPI (MADT) for SMP configuration information
110[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
111[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
112[ 0.000000] nr_irqs_gsi: 40
113[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
114[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
115[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
116[ 0.000000] PM: Registered nosave memory: 00000000c7fbe000 - 00000000e0000000
117[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
118[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000f9000000
119[ 0.000000] PM: Registered nosave memory: 00000000f9000000 - 0000000100000000
120[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
121[ 0.000000] Booting paravirtualized kernel on bare hardware
122[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
123[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880002000000 s90560 r8192 d24128 u1048576
124[ 0.000000] pcpu-alloc: s90560 r8192 d24128 u1048576 alloc=1*2097152
125[ 0.000000] pcpu-alloc: [0] 0 1
126[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1964076
127[ 0.000000] Policy zone: Normal
128[ 0.000000] Kernel command line: ro root=UUID=d798cd3b-e41b-479f-999e-b7b213521ec1 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
129[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
130[ 0.000000] Checking aperture...
131[ 0.000000] No AGP bridge found
132[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
133[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
134[ 0.000000] Memory: 7773416k/8896512k available (4555k kernel code, 918160k absent, 204936k reserved, 7254k data, 948k init)
135[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
136[ 0.000000] Hierarchical RCU implementation.
137[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
138[ 0.000000] RCU-based detection of stalled CPUs is disabled.
139[ 0.000000] Verbose stalled-CPUs detection is disabled.
140[ 0.000000] NR_IRQS:16640 nr_irqs:512
141[ 0.000000] Console: colour VGA+ 80x25
142[ 0.000000] console [tty0] enabled
143[ 0.000000] allocated 79953920 bytes of page_cgroup
144[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
145[ 0.000000] hpet clockevent registered
146[ 0.000000] Fast TSC calibration using PIT
147[ 0.000000] Detected 1600.066 MHz processor.
148[ 0.002016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.12 BogoMIPS (lpj=1600064)
149[ 0.002026] pid_max: default: 32768 minimum: 301
150[ 0.002084] Security Framework initialized
151[ 0.002099] SELinux: Initializing.
152[ 0.002117] SELinux: Starting in permissive mode
153[ 0.004353] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
154[ 0.010808] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
155[ 0.013486] Mount-cache hash table entries: 256
156[ 0.013799] Initializing cgroup subsys ns
157[ 0.013810] Initializing cgroup subsys cpuacct
158[ 0.013819] Initializing cgroup subsys memory
159[ 0.013857] Initializing cgroup subsys devices
160[ 0.013863] Initializing cgroup subsys freezer
161[ 0.013867] Initializing cgroup subsys net_cls
162[ 0.013871] Initializing cgroup subsys blkio
163[ 0.013941] CPU: Physical Processor ID: 0
164[ 0.013945] CPU: Processor Core ID: 0
165[ 0.013949] mce: CPU supports 6 MCE banks
166[ 0.013969] Performance Events: AMD PMU driver.
167[ 0.013978] ... version: 0
168[ 0.013982] ... bit width: 48
169[ 0.014018] ... generic registers: 4
170[ 0.014022] ... value mask: 0000ffffffffffff
171[ 0.014026] ... max period: 00007fffffffffff
172[ 0.014030] ... fixed-purpose events: 0
173[ 0.014033] ... event mask: 000000000000000f
174[ 0.014889] ACPI: Core revision 20100428
175[ 0.023463] ftrace: converting mcount calls to 0f 1f 44 00 00
176[ 0.023473] ftrace: allocating 23859 entries in 94 pages
177[ 0.025164] Setting APIC routing to flat
178[ 0.025558] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
179[ 0.035793] CPU0: AMD E-350 Processor stepping 00
180[ 0.035999] Booting Node 0, Processors #1 Ok.
181[ 0.107020] Brought up 2 CPUs
182[ 0.107025] Total of 2 processors activated (6399.95 BogoMIPS).
183[ 0.107488] sizeof(vma)=184 bytes
184[ 0.107496] sizeof(page)=56 bytes
185[ 0.107499] sizeof(inode)=584 bytes
186[ 0.107502] sizeof(dentry)=192 bytes
187[ 0.107505] sizeof(ext3inode)=800 bytes
188[ 0.107507] sizeof(buffer_head)=104 bytes
189[ 0.107510] sizeof(skbuff)=240 bytes
190[ 0.107513] sizeof(task_struct)=5944 bytes
191[ 0.108111] devtmpfs: initialized
192[ 0.119295] atomic64 test passed for x86-64 platform with CX8 and with SSE
193[ 0.119392] Time: 5:23:18 Date: 12/21/13
194[ 0.119482] NET: Registered protocol family 16
195[ 0.119767] ACPI: bus type pci registered
196[ 0.119932] PCI: Using configuration type 1 for base access
197[ 0.119935] PCI: Using configuration type 1 for extended access
198[ 0.123081] bio: create slab <bio-0> at 0
199[ 0.125355] ACPI: EC: Look up EC in DSDT
200[ 0.126995] ACPI: Executed 2 blocks of module-level executable AML code
201[ 0.134587] ACPI: Interpreter enabled
202[ 0.134592] ACPI: (supports S0 S1 S3 S4 S5)
203[ 0.134636] ACPI: BIOS offers _BFS
204[ 0.134639] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
205[ 0.134644] ACPI: Using IOAPIC for interrupt routing
206[ 0.143015] ACPI: Power Resource [PFN0] (on)
207[ 0.143396] ACPI: No dock devices found.
208[ 0.143403] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
209[ 0.143652] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
210[ 0.143950] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
211[ 0.143956] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
212[ 0.143961] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
213[ 0.143966] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xffffffff] (ignored)
214[ 0.144060] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
215[ 0.144068] pci 0000:00:01.0: reg 14: [io 0x1000-0x10ff]
216[ 0.144076] pci 0000:00:01.0: reg 18: [mem 0xf0100000-0xf013ffff]
217[ 0.144115] pci 0000:00:01.0: supports D1 D2
218[ 0.144148] pci 0000:00:01.1: reg 10: [mem 0xf0140000-0xf0143fff]
219[ 0.144193] pci 0000:00:01.1: supports D1 D2
220[ 0.144338] pci 0000:00:11.0: reg 10: [io 0x1410-0x1417]
221[ 0.144348] pci 0000:00:11.0: reg 14: [io 0x1420-0x1423]
222[ 0.144358] pci 0000:00:11.0: reg 18: [io 0x1418-0x141f]
223[ 0.144368] pci 0000:00:11.0: reg 1c: [io 0x1424-0x1427]
224[ 0.144377] pci 0000:00:11.0: reg 20: [io 0x1400-0x140f]
225[ 0.144387] pci 0000:00:11.0: reg 24: [mem 0xf014b000-0xf014b3ff]
226[ 0.144459] pci 0000:00:12.0: reg 10: [mem 0xf0148000-0xf0148fff]
227[ 0.144547] pci 0000:00:12.2: reg 10: [mem 0xf014b400-0xf014b4ff]
228[ 0.144614] pci 0000:00:12.2: supports D1 D2
229[ 0.144619] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
230[ 0.144626] pci 0000:00:12.2: PME# disabled
231[ 0.144675] pci 0000:00:13.0: reg 10: [mem 0xf0149000-0xf0149fff]
232[ 0.144764] pci 0000:00:13.2: reg 10: [mem 0xf014b500-0xf014b5ff]
233[ 0.144831] pci 0000:00:13.2: supports D1 D2
234[ 0.144835] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
235[ 0.144842] pci 0000:00:13.2: PME# disabled
236[ 0.144968] pci 0000:00:14.2: reg 10: [mem 0xf0144000-0xf0147fff 64bit]
237[ 0.145035] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
238[ 0.145042] pci 0000:00:14.2: PME# disabled
239[ 0.145180] pci 0000:00:14.5: reg 10: [mem 0xf014a000-0xf014afff]
240[ 0.145316] pci 0000:00:15.0: supports D1 D2
241[ 0.145425] pci 0000:00:15.2: supports D1 D2
242[ 0.145961] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
243[ 0.145970] pci 0000:00:14.4: bridge window [io 0xf000-0xe000] (disabled)
244[ 0.145978] pci 0000:00:14.4: bridge window [mem 0xf7f00000-0xf7efffff] (disabled)
245[ 0.145986] pci 0000:00:14.4: bridge window [mem 0xf7f00000-0xf7efffff pref] (disabled)
246[ 0.145992] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
247[ 0.146006] pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
248[ 0.146080] pci 0000:00:15.0: PCI bridge to [bus 02-02]
249[ 0.146090] pci 0000:00:15.0: bridge window [io 0xf000-0xe000] (disabled)
250[ 0.146096] pci 0000:00:15.0: bridge window [mem 0xf7f00000-0xf7efffff] (disabled)
251[ 0.146106] pci 0000:00:15.0: bridge window [mem 0xf7f00000-0xf7efffff pref] (disabled)
252[ 0.146231] pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf0007fff 64bit]
253[ 0.146332] pci 0000:04:00.0: supports D1 D2
254[ 0.146336] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
255[ 0.146344] pci 0000:04:00.0: PME# disabled
256[ 0.148147] pci 0000:00:15.2: PCI bridge to [bus 04-04]
257[ 0.148161] pci 0000:00:15.2: bridge window [io 0xf000-0xe000] (disabled)
258[ 0.148170] pci 0000:00:15.2: bridge window [mem 0xf0000000-0xf00fffff]
259[ 0.148181] pci 0000:00:15.2: bridge window [mem 0xf7f00000-0xf7efffff pref] (disabled)
260[ 0.148230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
261[ 0.148728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
262[ 0.148814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HDMI._PRT]
263[ 0.148922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
264[ 0.149094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
265[ 0.149198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT]
266[ 0.161058] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
267[ 0.161359] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
268[ 0.161675] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
269[ 0.162051] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
270[ 0.162336] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
271[ 0.162582] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
272[ 0.162891] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
273[ 0.163225] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
274[ 0.163339] HEST: HEST table parsing is initialized.
275[ 0.163488] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
276[ 0.163511] vgaarb: loaded
277[ 0.163668] SCSI subsystem initialized
278[ 0.164139] libata version 3.00 loaded.
279[ 0.164224] usbcore: registered new interface driver usbfs
280[ 0.164258] usbcore: registered new interface driver hub
281[ 0.165102] usbcore: registered new device driver usb
282[ 0.165144] PCI: Using ACPI for IRQ routing
283[ 0.165151] PCI: pci_cache_line_size set to 64 bytes
284[ 0.165280] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
285[ 0.165285] reserve RAM buffer: 00000000c7fbe000 - 00000000c7ffffff
286[ 0.165289] reserve RAM buffer: 000000021f000000 - 000000021fffffff
287[ 0.165501] NetLabel: Initializing
288[ 0.165505] NetLabel: domain hash size = 128
289[ 0.165508] NetLabel: protocols = UNLABELED CIPSOv4
290[ 0.165532] NetLabel: unlabeled traffic allowed by default
291[ 0.165717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
292[ 0.165726] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
293[ 0.169028] Switching to clocksource tsc
294[ 0.188115] pnp: PnP ACPI init
295[ 0.188162] ACPI: bus type pnp registered
296[ 0.188407] pnp 00:00: [bus 00-ff]
297[ 0.188413] pnp 00:00: [io 0x0cf8-0x0cff]
298[ 0.188417] pnp 00:00: [io 0x0000-0x0cf7 window]
299[ 0.188422] pnp 00:00: [io 0x0d00-0xffff window]
300[ 0.188427] pnp 00:00: [mem 0x000a0000-0x000bffff]
301[ 0.188431] pnp 00:00: [mem 0xe0000000-0xffffffff]
302[ 0.188519] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
303[ 0.189212] pnp 00:01: [irq 8]
304[ 0.189217] pnp 00:01: [io 0x0070-0x0071]
305[ 0.189271] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
306[ 0.189302] pnp 00:02: [io 0x0061]
307[ 0.189357] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
308[ 0.189384] pnp 00:03: [dma 4]
309[ 0.189388] pnp 00:03: [io 0x0000-0x000f]
310[ 0.189392] pnp 00:03: [io 0x0081-0x0083]
311[ 0.189395] pnp 00:03: [io 0x0087]
312[ 0.189399] pnp 00:03: [io 0x0089-0x008b]
313[ 0.189402] pnp 00:03: [io 0x008f]
314[ 0.189406] pnp 00:03: [io 0x00c0-0x00df]
315[ 0.189456] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
316[ 0.189477] pnp 00:04: [io 0x00f0-0x00ff]
317[ 0.189554] pnp 00:04: [irq 13]
318[ 0.189605] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
319[ 0.190613] pnp: PnP ACPI: found 5 devices
320[ 0.190616] ACPI: ACPI bus type pnp unregistered
321[ 0.199167] pci 0000:00:14.4: PCI bridge to [bus 01-01]
322[ 0.199173] pci 0000:00:14.4: bridge window [io disabled]
323[ 0.199181] pci 0000:00:14.4: bridge window [mem disabled]
324[ 0.199188] pci 0000:00:14.4: bridge window [mem pref disabled]
325[ 0.199198] pci 0000:00:15.0: PCI bridge to [bus 02-02]
326[ 0.199201] pci 0000:00:15.0: bridge window [io disabled]
327[ 0.199208] pci 0000:00:15.0: bridge window [mem disabled]
328[ 0.199214] pci 0000:00:15.0: bridge window [mem pref disabled]
329[ 0.199223] pci 0000:00:15.2: PCI bridge to [bus 04-04]
330[ 0.199226] pci 0000:00:15.2: bridge window [io disabled]
331[ 0.199237] pci 0000:00:15.2: bridge window [mem 0xf0000000-0xf00fffff]
332[ 0.199243] pci 0000:00:15.2: bridge window [mem pref disabled]
333[ 0.199280] alloc irq_desc for 16 on node -1
334[ 0.199284] alloc kstat_irqs on node -1
335[ 0.199298] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
336[ 0.199306] pci 0000:00:15.0: setting latency timer to 64
337[ 0.199320] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
338[ 0.199327] pci 0000:00:15.2: setting latency timer to 64
339[ 0.199334] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
340[ 0.199338] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
341[ 0.199344] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
342[ 0.199348] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffffffffffff]
343[ 0.199353] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf00fffff]
344[ 0.199406] NET: Registered protocol family 2
345[ 0.199896] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
346[ 0.202897] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
347[ 0.207917] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
348[ 0.208503] TCP: Hash tables configured (established 524288 bind 65536)
349[ 0.208510] TCP reno registered
350[ 0.208563] UDP hash table entries: 4096 (order: 5, 131072 bytes)
351[ 0.208670] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
352[ 0.208913] NET: Registered protocol family 1
353[ 0.208970] pci 0000:00:01.0: Boot video device
354[ 0.209765] PCI: CLS 64 bytes, default 64
355[ 0.209890] Trying to unpack rootfs image as initramfs...
356[ 0.728836] Freeing initrd memory: 13064k freed
357[ 0.736832] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
358[ 0.736842] Placing 64MB software IO TLB between ffff88000211e000 - ffff88000611e000
359[ 0.736847] software IO TLB at phys 0x211e000 - 0x611e000
360[ 0.737833] audit: initializing netlink socket (disabled)
361[ 0.737859] type=2000 audit(1387603398.736:1): initialized
362[ 0.758617] HugeTLB registered 2 MB page size, pre-allocated 0 pages
363[ 0.762222] VFS: Disk quotas dquot_6.5.2
364[ 0.762354] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
365[ 0.763304] msgmni has been set to 15207
366[ 0.763404] SELinux: Registering netfilter hooks
367[ 0.765346] alg: No test for stdrng (krng)
368[ 0.765524] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
369[ 0.765533] io scheduler noop registered
370[ 0.765537] io scheduler deadline registered
371[ 0.765607] io scheduler cfq registered (default)
372[ 0.766022] pcieport 0000:00:15.0: setting latency timer to 64
373[ 0.766085] alloc irq_desc for 40 on node -1
374[ 0.766089] alloc kstat_irqs on node -1
375[ 0.766110] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
376[ 0.766264] pcieport 0000:00:15.2: setting latency timer to 64
377[ 0.766319] alloc irq_desc for 41 on node -1
378[ 0.766323] alloc kstat_irqs on node -1
379[ 0.766336] pcieport 0000:00:15.2: irq 41 for MSI/MSI-X
380[ 0.766469] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
381[ 0.766514] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
382[ 0.766518] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
383[ 0.767362] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
384[ 0.767447] ACPI: Power Button [PWRB]
385[ 0.767552] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
386[ 0.767559] ACPI: Power Button [PWRF]
387[ 0.767864] ACPI: Fan [FAN0] (on)
388[ 0.768332] ACPI: acpi_idle registered with cpuidle
389[ 0.772954] thermal LNXTHERM:01: registered as thermal_zone0
390[ 0.772973] ACPI: Thermal Zone [TZ00] (40 C)
391[ 0.773004] ERST: Table is not found!
392[ 0.773361] Non-volatile memory driver v1.3
393[ 0.773366] Linux agpgart interface v0.103
394[ 0.773488] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
395[ 1.018393] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
396[ 1.021151] brd: module loaded
397[ 1.022217] loop: module loaded
398[ 1.022382] ahci 0000:00:11.0: version 3.0
399[ 1.022473] alloc irq_desc for 19 on node -1
400[ 1.022477] alloc kstat_irqs on node -1
401[ 1.022493] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
402[ 1.022826] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
403[ 1.022832] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
404[ 1.024251] scsi0 : ahci
405[ 1.024731] scsi1 : ahci
406[ 1.025188] scsi2 : ahci
407[ 1.025489] scsi3 : ahci
408[ 1.025725] scsi4 : ahci
409[ 1.026015] scsi5 : ahci
410[ 1.026401] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
411[ 1.026408] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
412[ 1.026413] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
413[ 1.026419] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
414[ 1.026425] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
415[ 1.026430] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
416[ 1.026596] Fixed MDIO Bus: probed
417[ 1.026733] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
418[ 1.026840] alloc irq_desc for 17 on node -1
419[ 1.026844] alloc kstat_irqs on node -1
420[ 1.026859] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
421[ 1.026899] ehci_hcd 0000:00:12.2: EHCI Host Controller
422[ 1.027045] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
423[ 1.027132] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
424[ 1.027179] ehci_hcd 0000:00:12.2: debug port 1
425[ 1.027221] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf014b400
426[ 1.033265] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
427[ 1.033350] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
428[ 1.033355] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
429[ 1.033360] usb usb1: Product: EHCI Host Controller
430[ 1.033364] usb usb1: Manufacturer: Linux 2.6.35.13-92.fc14.x86_64 ehci_hcd
431[ 1.033367] usb usb1: SerialNumber: 0000:00:12.2
432[ 1.033618] hub 1-0:1.0: USB hub found
433[ 1.033628] hub 1-0:1.0: 5 ports detected
434[ 1.033925] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
435[ 1.034049] ehci_hcd 0000:00:13.2: EHCI Host Controller
436[ 1.034137] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
437[ 1.034195] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
438[ 1.034231] ehci_hcd 0000:00:13.2: debug port 1
439[ 1.034257] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf014b500
440[ 1.040272] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
441[ 1.040339] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
442[ 1.040344] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
443[ 1.040349] usb usb2: Product: EHCI Host Controller
444[ 1.040353] usb usb2: Manufacturer: Linux 2.6.35.13-92.fc14.x86_64 ehci_hcd
445[ 1.040357] usb usb2: SerialNumber: 0000:00:13.2
446[ 1.040628] hub 2-0:1.0: USB hub found
447[ 1.040638] hub 2-0:1.0: 5 ports detected
448[ 1.040857] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
449[ 1.040966] alloc irq_desc for 18 on node -1
450[ 1.040970] alloc kstat_irqs on node -1
451[ 1.040986] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
452[ 1.041110] ohci_hcd 0000:00:12.0: OHCI Host Controller
453[ 1.041196] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
454[ 1.041265] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0148000
455[ 1.096408] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
456[ 1.096415] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
457[ 1.096420] usb usb3: Product: OHCI Host Controller
458[ 1.096424] usb usb3: Manufacturer: Linux 2.6.35.13-92.fc14.x86_64 ohci_hcd
459[ 1.096428] usb usb3: SerialNumber: 0000:00:12.0
460[ 1.096693] hub 3-0:1.0: USB hub found
461[ 1.096774] hub 3-0:1.0: 5 ports detected
462[ 1.097079] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
463[ 1.097193] ohci_hcd 0000:00:13.0: OHCI Host Controller
464[ 1.097291] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
465[ 1.097400] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0149000
466[ 1.152382] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
467[ 1.152390] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
468[ 1.152395] usb usb4: Product: OHCI Host Controller
469[ 1.152399] usb usb4: Manufacturer: Linux 2.6.35.13-92.fc14.x86_64 ohci_hcd
470[ 1.152403] usb usb4: SerialNumber: 0000:00:13.0
471[ 1.152684] hub 4-0:1.0: USB hub found
472[ 1.152765] hub 4-0:1.0: 5 ports detected
473[ 1.153065] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
474[ 1.153178] ohci_hcd 0000:00:14.5: OHCI Host Controller
475[ 1.153267] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
476[ 1.153373] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf014a000
477[ 1.208396] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
478[ 1.208404] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
479[ 1.208409] usb usb5: Product: OHCI Host Controller
480[ 1.208413] usb usb5: Manufacturer: Linux 2.6.35.13-92.fc14.x86_64 ohci_hcd
481[ 1.208417] usb usb5: SerialNumber: 0000:00:14.5
482[ 1.208685] hub 5-0:1.0: USB hub found
483[ 1.208766] hub 5-0:1.0: 2 ports detected
484[ 1.208979] uhci_hcd: USB Universal Host Controller Interface driver
485[ 1.209121] PNP: No PS/2 controller found. Probing ports directly.
486[ 1.212890] serio: i8042 KBD port at 0x60,0x64 irq 1
487[ 1.212910] serio: i8042 AUX port at 0x60,0x64 irq 12
488[ 1.213075] mice: PS/2 mouse device common for all mice
489[ 1.213396] rtc_cmos 00:01: RTC can wake from S4
490[ 1.213478] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
491[ 1.213581] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
492[ 1.213727] device-mapper: uevent: version 1.0.3
493[ 1.214337] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@redhat.com
494[ 1.214901] cpuidle: using governor ladder
495[ 1.215075] cpuidle: using governor menu
496[ 1.215947] usbcore: registered new interface driver hiddev
497[ 1.215975] usbcore: registered new interface driver usbhid
498[ 1.215978] usbhid: USB HID core driver
499[ 1.216085] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
500[ 1.216340] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
501[ 1.216345] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
502[ 1.216350] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
503[ 1.216470] ip_tables: (C) 2000-2006 Netfilter Core Team
504[ 1.216496] TCP cubic registered
505[ 1.216498] Initializing XFRM netlink socket
506[ 1.216519] NET: Registered protocol family 17
507[ 1.216774] PM: Resume from disk failed.
508[ 1.216799] registered taskstats version 1
509[ 1.217309] Magic number: 9:964:365
510[ 1.217544] rtc_cmos 00:01: setting system clock to 2013-12-21 05:23:19 UTC (1387603399)
511[ 1.217585] Initalizing network drop monitor service
512[ 1.332387] ata4: SATA link down (SStatus 0 SControl 300)
513[ 1.332398] ata6: SATA link down (SStatus 0 SControl 300)
514[ 1.332463] ata2: SATA link down (SStatus 0 SControl 300)
515[ 1.332471] ata5: SATA link down (SStatus 0 SControl 300)
516[ 1.332519] ata3: SATA link down (SStatus 0 SControl 300)
517[ 1.490374] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
518[ 1.491288] ata1.00: ATA-8: OCZ-VERTEX, 1.5, max UDMA/133
519[ 1.491296] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
520[ 1.493944] ata1.00: configured for UDMA/133
521[ 1.494606] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX 1.5 PQ: 0 ANSI: 5
522[ 1.494984] sd 0:0:0:0: Attached scsi generic sg0 type 0
523[ 1.495282] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
524[ 1.495412] sd 0:0:0:0: [sda] Write Protect is off
525[ 1.495418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
526[ 1.495470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
527[ 1.495891] sda: sda1 sda2 sda3
528[ 1.497641] sd 0:0:0:0: [sda] Attached SCSI disk
529[ 1.497819] Freeing unused kernel memory: 948k freed
530[ 1.498361] Write protecting the kernel read-only data: 10240k
531[ 1.499301] Freeing unused kernel memory: 1572k freed
532[ 1.500743] Freeing unused kernel memory: 1836k freed
533[ 1.512404] usb 3-4: new low speed USB device using ohci_hcd and address 2
534[ 1.535089] dracut: dracut-006-6.fc14
535[ 1.565511] udev[84]: starting version 161
536[ 1.667496] usb 3-4: New USB device found, idVendor=046d, idProduct=c312
537[ 1.667505] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
538[ 1.667510] usb 3-4: Product: USB Multimedia Keyboard
539[ 1.667514] usb 3-4: Manufacturer: BTC
540[ 1.668240] dracut: Starting plymouth daemon
541[ 1.675998] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/input/input2
542[ 1.676179] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-4/input0
543[ 1.689598] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.1/input/input3
544[ 1.689856] generic-usb 0003:046D:C312.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:12.0-4/input1
545[ 1.792391] usb 2-2: new high speed USB device using ehci_hcd and address 2
546[ 1.922772] usb 2-2: New USB device found, idVendor=077b, idProduct=2226
547[ 1.922782] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
548[ 1.922788] usb 2-2: Product: Linksys USB2.0 Network Adapter
549[ 1.922791] usb 2-2: Manufacturer: USB
550[ 2.079301] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
551[ 2.092964] dracut: Remounting /dev/disk/by-uuid/d798cd3b-e41b-479f-999e-b7b213521ec1 with -o noatime,ro
552[ 2.100165] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
553[ 2.104825] dracut: Mounted root filesystem /dev/sda3
554[ 2.146521] dracut: Loading SELinux policy
555[ 2.203787] SELinux: Disabled at runtime.
556[ 2.203827] SELinux: Unregistering netfilter hooks
557[ 2.207619] type=1404 audit(1387603400.489:2): selinux=0 auid=4294967295 ses=4294967295
558[ 2.216888] dracut: /sbin/load_policy: Can't load policy: No such file or directory
559[ 2.294140] dracut: Switching root
560[ 2.472266] readahead: starting
561[ 2.641626] udev[345]: starting version 161
562[ 2.991635] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMB0 [mem 0x00000b00-0x00000b0b 64bit pref window disabled]
563[ 2.991644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
564[ 3.037298] microcode: CPU0: patch_level=0x5000028
565[ 3.092769] microcode: CPU1: patch_level=0x5000028
566[ 3.109181] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
567[ 3.271370] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
568[ 3.271502] alloc irq_desc for 42 on node -1
569[ 3.271507] alloc kstat_irqs on node -1
570[ 3.271527] HDA Intel 0000:00:01.1: irq 42 for MSI/MSI-X
571[ 3.271565] HDA Intel 0000:00:01.1: setting latency timer to 64
572[ 3.296078] microcode: AMD microcode update via /dev/cpu/microcode not supported
573[ 3.314478] microcode: AMD microcode update via /dev/cpu/microcode not supported
574[ 3.316147] microcode: AMD microcode update via /dev/cpu/microcode not supported
575[ 3.319872] microcode: AMD microcode update via /dev/cpu/microcode not supported
576[ 3.325477] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
577[ 3.326899] microcode: AMD microcode update via /dev/cpu/microcode not supported
578[ 3.366224] hda_codec: ALC892: SKU not ready 0x00000100
579[ 3.366531] hda_codec: ALC892: BIOS auto-probing.
580[ 3.366541] ALSA sound/pci/hda/hda_codec.c:4435: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0)
581[ 3.366548] ALSA sound/pci/hda/hda_codec.c:4439: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
582[ 3.366554] ALSA sound/pci/hda/hda_codec.c:4443: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
583[ 3.366560] ALSA sound/pci/hda/hda_codec.c:4444: mono: mono_out=0x0
584[ 3.366565] ALSA sound/pci/hda/hda_codec.c:4447: dig-out=0x1e/0x0
585[ 3.366570] ALSA sound/pci/hda/hda_codec.c:4455: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
586[ 3.369426] ALSA sound/pci/hda/patch_realtek.c:1358: realtek: No valid SSID, checking pincfg 0x00000100 for NID 0x1d
587[ 3.369432] ALSA sound/pci/hda/patch_realtek.c:1442: realtek: Enable default setup for auto mode as fallback
588[ 3.378980] ALSA sound/pci/hda/hda_codec.c:407: Too many connections
589[ 3.853677] usb 2-2: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq 6 len 255 ret -110
590[ 3.916939] asix 2-2:1.0: eth0: register 'asix' at usb-0000:00:13.2-2, ASIX AX8817x USB 2.0 Ethernet, 00:10:60:24:51:5b
591[ 3.917002] usbcore: registered new interface driver asix
592[ 3.933587] udev[348]: renamed network interface eth0 to eth1
593[ 4.027553] kvm: Nested Virtualization enabled
594[ 4.027561] kvm: Nested Paging enabled
595[ 4.214830] EXT4-fs (sda3): re-mounted. Opts: (null)
596[ 4.334651] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
597[ 4.578147] Adding 2047996k swap on /dev/sda2. Priority:-1 extents:1 across:2047996k SS
598[ 4.823863] NET: Registered protocol family 10
599[ 4.825186] lo: Disabled Privacy Extensions
600[ 4.836366] ip6_tables: (C) 2000-2006 Netfilter Core Team
601[ 5.278855] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
602[ 5.278948] powernow-k8: 0 : pstate 0 (1600 MHz)
603[ 5.278952] powernow-k8: 1 : pstate 1 (1280 MHz)
604[ 5.278955] powernow-k8: 2 : pstate 2 (800 MHz)
605[ 5.856609] eth1: link down
606[ 5.863525] ADDRCONF(NETDEV_UP): eth1: link is not ready
607[ 6.029203] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
608[ 6.037928] eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
609[ 6.252728] RPC: Registered udp transport module.
610[ 6.252735] RPC: Registered tcp transport module.
611[ 6.252738] RPC: Registered tcp NFSv4.1 backchannel transport module.
612[ 16.482252] eth1: no IPv6 routers present