Jonathan Neuschäfer | a5d17e1 | 2017-10-05 16:04:00 +0200 | [diff] [blame] | 1 | [ 0.000000] Linux version 4.9.0-3-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19) |
| 2 | [ 0.000000] x86/fpu: Legacy x87 FPU detected. |
| 3 | [ 0.000000] x86/fpu: Using 'eager' FPU context switches. |
| 4 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 5 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable |
| 6 | [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved |
| 7 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 8 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000df9cfff] usable |
| 9 | [ 0.000000] BIOS-e820: [mem 0x000000000df9d000-0x000000000dffffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved |
| 12 | [ 0.000000] NX (Execute Disable) protection: active |
| 13 | [ 0.000000] SMBIOS 2.7 present. |
| 14 | [ 0.000000] DMI: WinNET G170/G170, BIOS 4.6-1689-g0d3b11898b 10/05/2017 |
| 15 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 16 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 17 | [ 0.000000] e820: last_pfn = 0xdf9d max_arch_pfn = 0x1000000 |
| 18 | [ 0.000000] MTRR default type: uncachable |
| 19 | [ 0.000000] MTRR fixed ranges enabled: |
| 20 | [ 0.000000] 00000-9FFFF write-back |
| 21 | [ 0.000000] A0000-BFFFF uncachable |
| 22 | [ 0.000000] C0000-FFFFF write-back |
| 23 | [ 0.000000] MTRR variable ranges enabled: |
| 24 | [ 0.000000] 0 base 000000000 mask FF0000000 write-back |
| 25 | [ 0.000000] 1 base 00E000000 mask FFE000000 uncachable |
| 26 | [ 0.000000] 2 base 0F8000000 mask FFC000000 write-combining |
| 27 | [ 0.000000] 3 disabled |
| 28 | [ 0.000000] 4 disabled |
| 29 | [ 0.000000] 5 disabled |
| 30 | [ 0.000000] 6 disabled |
| 31 | [ 0.000000] 7 disabled |
| 32 | [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| 33 | [ 0.000000] initial memory mapped: [mem 0x00000000-0x0bdfffff] |
| 34 | [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 |
| 35 | [ 0.000000] BRK [0x0b995000, 0x0b995fff] PGTABLE |
| 36 | [ 0.000000] BRK [0x0b996000, 0x0b997fff] PGTABLE |
| 37 | [ 0.000000] BRK [0x0b998000, 0x0b998fff] PGTABLE |
| 38 | [ 0.000000] BRK [0x0b999000, 0x0b999fff] PGTABLE |
| 39 | [ 0.000000] RAMDISK: [mem 0x0c729000-0x0d899fff] |
| 40 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 41 | [ 0.000000] ACPI: RSDP 0x00000000000F7110 000024 (v02 CORE ) |
| 42 | [ 0.000000] ACPI: XSDT 0x000000000DFB00E0 000044 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 43 | [ 0.000000] ACPI: FACP 0x000000000DFB09B0 0000F4 (v04 CORE COREBOOT 00000000 CORE 0000002A) |
| 44 | [ 0.000000] ACPI: DSDT 0x000000000DFB0280 000724 (v02 COREv4 COREBOOT 20170227 INTL 20161222) |
| 45 | [ 0.000000] ACPI: FACS 0x000000000DFB0240 000040 |
| 46 | [ 0.000000] ACPI: FACS 0x000000000DFB0240 000040 |
| 47 | [ 0.000000] ACPI: SSDT 0x000000000DFB0AB0 000068 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 48 | [ 0.000000] ACPI: TCPA 0x000000000DFB0B20 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 49 | [ 0.000000] ACPI: APIC 0x000000000DFB0B60 000054 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 50 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 51 | [ 0.000000] 0MB HIGHMEM available. |
| 52 | [ 0.000000] 223MB LOWMEM available. |
| 53 | [ 0.000000] mapped low ram: 0 - 0df9d000 |
| 54 | [ 0.000000] low ram: 0 - 0df9d000 |
| 55 | [ 0.000000] Zone ranges: |
| 56 | [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| 57 | [ 0.000000] Normal [mem 0x0000000001000000-0x000000000df9cfff] |
| 58 | [ 0.000000] HighMem empty |
| 59 | [ 0.000000] Movable zone start for each node |
| 60 | [ 0.000000] Early memory node ranges |
| 61 | [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| 62 | [ 0.000000] node 0: [mem 0x0000000000100000-0x000000000df9cfff] |
| 63 | [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000df9cfff] |
| 64 | [ 0.000000] On node 0 totalpages: 57147 |
| 65 | [ 0.000000] free_area_init_node: node 0, pgdat cb7e4940, node_mem_map cdda5024 |
| 66 | [ 0.000000] DMA zone: 36 pages used for memmap |
| 67 | [ 0.000000] DMA zone: 0 pages reserved |
| 68 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 69 | [ 0.000000] Normal zone: 468 pages used for memmap |
| 70 | [ 0.000000] Normal zone: 53149 pages, LIFO batch:15 |
| 71 | [ 0.000000] Using APIC driver default |
| 72 | [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| 73 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 74 | [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. |
| 75 | [ 0.000000] Using ACPI for processor (LAPIC) configuration information |
| 76 | [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs |
| 77 | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| 78 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 79 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 80 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 81 | [ 0.000000] e820: [mem 0x0e000000-0xfebfffff] available for PCI devices |
| 82 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 83 | [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| 84 | [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 |
| 85 | [ 0.000000] percpu: Embedded 20 pages/cpu @cdd8e000 s50700 r0 d31220 u81920 |
| 86 | [ 0.000000] pcpu-alloc: s50700 r0 d31220 u81920 alloc=20*4096 |
| 87 | [ 0.000000] pcpu-alloc: [0] 0 |
| 88 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56643 |
| 89 | [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-686-pae root=/dev/mapper/mettigel--vg-root ro console=ttyS0,115200 noapic |
| 90 | [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) |
| 91 | [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) |
| 92 | [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) |
| 93 | [ 0.000000] Initializing CPU#0 |
| 94 | [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) |
| 95 | [ 0.000000] Memory: 198516K/228588K available (5819K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 30072K reserved, 0K cma-reserved, 0K highmem) |
| 96 | [ 0.000000] virtual kernel memory layout: |
| 97 | fixmap : 0xffd36000 - 0xfffff000 (2852 kB) |
| 98 | pkmap : 0xffa00000 - 0xffc00000 (2048 kB) |
| 99 | vmalloc : 0xce79d000 - 0xff9fe000 ( 786 MB) |
| 100 | lowmem : 0xc0000000 - 0xcdf9d000 ( 223 MB) |
| 101 | .init : 0xcb801000 - 0xcb8bd000 ( 752 kB) |
| 102 | .data : 0xcb5af032 - 0xcb7ff9c0 (2370 kB) |
| 103 | .text : 0xcb000000 - 0xcb5af032 (5820 kB) |
| 104 | [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| 105 | [ 0.000000] Hierarchical RCU implementation. |
| 106 | [ 0.000000] Build-time adjustment of leaf fanout to 32. |
| 107 | [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1. |
| 108 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 |
| 109 | [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 |
| 110 | [ 0.000000] CPU 0 irqstacks, hard=cc02e000 soft=cc030000 |
| 111 | [ 0.000000] Console: colour dummy device 80x25 |
| 112 | [ 0.000000] console [ttyS0] enabled |
| 113 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 114 | [ 0.000000] tsc: Detected 399.027 MHz processor |
| 115 | [ 0.000105] Calibrating delay loop (skipped), value calculated using timer frequency.. 798.05 BogoMIPS (lpj=1596108) |
| 116 | [ 0.004000] pid_max: default: 32768 minimum: 301 |
| 117 | [ 0.004000] ACPI: Core revision 20160831 |
| 118 | [ 0.005445] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| 119 | [ 0.008000] ACPI: setting ELCR to 0200 (from 0c21) |
| 120 | [ 0.008328] Security Framework initialized |
| 121 | [ 0.012025] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 122 | [ 0.016072] AppArmor: AppArmor disabled by boot time parameter |
| 123 | [ 0.020185] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| 124 | [ 0.024024] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| 125 | [ 0.034252] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 |
| 126 | [ 0.036047] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 |
| 127 | [ 0.122966] Freeing SMP alternatives memory: 24K (cb8bd000 - cb8c3000) |
| 128 | [ 0.137961] ftrace: allocating 24027 entries in 47 pages |
| 129 | [ 0.204960] smpboot: Max logical packages: 1 |
| 130 | [ 0.208075] Enabling APIC mode: Flat. Using 0 I/O APICs |
| 131 | [ 0.220014] smpboot: CPU0: Centaur VIA Eden Processor 400MHz (family: 0x6, model: 0xd, stepping: 0x0) |
| 132 | [ 0.228026] Performance Events: no PMU driver, software events only. |
| 133 | [ 0.241207] NMI watchdog: disabled (cpu0): hardware events not enabled |
| 134 | [ 0.244019] NMI watchdog: Shutting down hard lockup detector on all cpus |
| 135 | [ 0.248149] x86: Booted up 1 node, 1 CPUs |
| 136 | [ 0.252024] smpboot: Total of 1 processors activated (798.05 BogoMIPS) |
| 137 | [ 0.260181] devtmpfs: initialized |
| 138 | [ 0.266826] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| 139 | [ 0.268060] futex hash table entries: 256 (order: 2, 16384 bytes) |
| 140 | [ 0.272396] pinctrl core: initialized pinctrl subsystem |
| 141 | [ 0.277537] NET: Registered protocol family 16 |
| 142 | [ 0.285239] cpuidle: using governor ladder |
| 143 | [ 0.288023] cpuidle: using governor menu |
| 144 | [ 0.292329] ACPI FADT declares the system doesn't support MSI, so disable it |
| 145 | [ 0.296017] ACPI: bus type PCI registered |
| 146 | [ 0.300026] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 147 | [ 0.304612] PCI: Using configuration type 1 for base access |
| 148 | [ 0.321654] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 149 | [ 0.326339] ACPI: Added _OSI(Module Device) |
| 150 | [ 0.328054] ACPI: Added _OSI(Processor Device) |
| 151 | [ 0.332017] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 152 | [ 0.336016] ACPI: Added _OSI(Processor Aggregator Device) |
| 153 | [ 0.344405] ACPI: Interpreter enabled |
| 154 | [ 0.348131] ACPI: (supports S0 S5) |
| 155 | [ 0.351553] ACPI: Using PIC for interrupt routing |
| 156 | [ 0.352672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 157 | [ 0.365697] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 158 | [ 0.368066] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments] |
| 159 | [ 0.372055] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM |
| 160 | [ 0.376040] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| 161 | [ 0.381342] PCI host bridge to bus 0000:00 |
| 162 | [ 0.384043] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| 163 | [ 0.388025] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| 164 | [ 0.392026] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window] |
| 165 | [ 0.396028] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 166 | [ 0.400084] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000 |
| 167 | [ 0.400139] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff pref] |
| 168 | [ 0.400843] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000 |
| 169 | [ 0.401449] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000 |
| 170 | [ 0.402045] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000 |
| 171 | [ 0.402757] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000 |
| 172 | [ 0.404285] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000 |
| 173 | [ 0.404885] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400 |
| 174 | [ 0.405048] pci 0000:00:01.0: supports D1 |
| 175 | [ 0.405586] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f |
| 176 | [ 0.405641] pci 0000:00:0f.0: reg 0x10: [io 0x1ca0-0x1ca7] |
| 177 | [ 0.405678] pci 0000:00:0f.0: reg 0x14: [io 0x1cb0-0x1cb3] |
| 178 | [ 0.405717] pci 0000:00:0f.0: reg 0x18: [io 0x1ca8-0x1caf] |
| 179 | [ 0.405753] pci 0000:00:0f.0: reg 0x1c: [io 0x1cb4-0x1cb7] |
| 180 | [ 0.405790] pci 0000:00:0f.0: reg 0x20: [io 0x1c80-0x1c8f] |
| 181 | [ 0.405827] pci 0000:00:0f.0: reg 0x24: [io 0x1000-0x10ff] |
| 182 | [ 0.406413] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a |
| 183 | [ 0.406539] pci 0000:00:0f.1: reg 0x20: [io 0x1c90-0x1c9f] |
| 184 | [ 0.406601] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| 185 | [ 0.408029] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| 186 | [ 0.412023] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| 187 | [ 0.416024] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| 188 | [ 0.420626] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300 |
| 189 | [ 0.420757] pci 0000:00:10.0: reg 0x20: [io 0x1c00-0x1c1f] |
| 190 | [ 0.420890] pci 0000:00:10.0: supports D1 D2 |
| 191 | [ 0.420906] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 192 | [ 0.421506] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300 |
| 193 | [ 0.421637] pci 0000:00:10.1: reg 0x20: [io 0x1c20-0x1c3f] |
| 194 | [ 0.421773] pci 0000:00:10.1: supports D1 D2 |
| 195 | [ 0.421789] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold |
| 196 | [ 0.424488] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300 |
| 197 | [ 0.424618] pci 0000:00:10.2: reg 0x20: [io 0x1c40-0x1c5f] |
| 198 | [ 0.424750] pci 0000:00:10.2: supports D1 D2 |
| 199 | [ 0.424766] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold |
| 200 | [ 0.425353] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300 |
| 201 | [ 0.425482] pci 0000:00:10.3: reg 0x20: [io 0x1c60-0x1c7f] |
| 202 | [ 0.425619] pci 0000:00:10.3: supports D1 D2 |
| 203 | [ 0.425635] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold |
| 204 | [ 0.426236] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320 |
| 205 | [ 0.426291] pci 0000:00:10.4: reg 0x10: [mem 0xfd010000-0xfd0100ff] |
| 206 | [ 0.426500] pci 0000:00:10.4: supports D1 D2 |
| 207 | [ 0.426516] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold |
| 208 | [ 0.427115] pci 0000:00:10.5: [1106:d104] type 00 class 0x028000 |
| 209 | [ 0.427172] pci 0000:00:10.5: reg 0x10: [mem 0xfd011000-0xfd0110ff] |
| 210 | [ 0.427377] pci 0000:00:10.5: supports D1 D2 |
| 211 | [ 0.427393] pci 0000:00:10.5: PME# supported from D0 D1 D2 D3hot |
| 212 | [ 0.428028] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100 |
| 213 | [ 0.428207] HPET not enabled in BIOS. You might try hpet=force boot option |
| 214 | [ 0.432669] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100 |
| 215 | [ 0.432726] pci 0000:00:11.5: reg 0x10: [io 0x1400-0x14ff] |
| 216 | [ 0.436061] pci 0000:00:11.5: supports D1 D2 |
| 217 | [ 0.436597] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000 |
| 218 | [ 0.436654] pci 0000:00:12.0: reg 0x10: [io 0x1800-0x18ff] |
| 219 | [ 0.436692] pci 0000:00:12.0: reg 0x14: [mem 0xfd012000-0xfd0120ff] |
| 220 | [ 0.436884] pci 0000:00:12.0: supports D1 D2 |
| 221 | [ 0.436900] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 222 | [ 0.437859] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000 |
| 223 | [ 0.437912] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf7ffffff pref] |
| 224 | [ 0.437947] pci 0000:01:00.0: reg 0x14: [mem 0xfb000000-0xfbffffff] |
| 225 | [ 0.438046] pci 0000:01:00.0: reg 0x30: [mem 0xfd000000-0xfd00ffff pref] |
| 226 | [ 0.438146] pci 0000:01:00.0: supports D1 D2 |
| 227 | [ 0.438660] pci 0000:00:01.0: PCI bridge to [bus 01] |
| 228 | [ 0.440040] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] |
| 229 | [ 0.440063] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff] |
| 230 | [ 0.440086] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff pref] |
| 231 | [ 0.440124] pci_bus 0000:00: on NUMA node 0 |
| 232 | [ 0.444520] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12) |
| 233 | [ 0.450540] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12) |
| 234 | [ 0.454514] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 |
| 235 | [ 0.461902] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. |
| 236 | [ 0.472237] vgaarb: setting as boot device: PCI:0000:01:00.0 |
| 237 | [ 0.476000] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none |
| 238 | [ 0.476019] vgaarb: loaded |
| 239 | [ 0.480019] vgaarb: bridge control possible 0000:01:00.0 |
| 240 | [ 0.485063] PCI: Using ACPI for IRQ routing |
| 241 | [ 0.488043] PCI: pci_cache_line_size set to 64 bytes |
| 242 | [ 0.488300] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] |
| 243 | [ 0.488316] e820: reserve RAM buffer [mem 0x0df9d000-0x0fffffff] |
| 244 | [ 0.494213] clocksource: Switched to clocksource refined-jiffies |
| 245 | [ 0.594194] VFS: Disk quotas dquot_6.6.0 |
| 246 | [ 0.596203] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| 247 | [ 0.601057] pnp: PnP ACPI init |
| 248 | [ 0.605020] pnp: PnP ACPI: found 0 devices |
| 249 | [ 0.608040] PnPBIOS: Disabled by ACPI PNP |
| 250 | [ 0.671286] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| 251 | [ 0.672122] clocksource: Switched to clocksource acpi_pm |
| 252 | [ 0.677506] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfd000000-0xfd00ffff pref]: no compatible bridge window |
| 253 | [ 0.687665] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc00ffff pref] |
| 254 | [ 0.694941] pci 0000:00:01.0: PCI bridge to [bus 01] |
| 255 | [ 0.699957] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] |
| 256 | [ 0.706110] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff] |
| 257 | [ 0.712942] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff pref] |
| 258 | [ 0.720232] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| 259 | [ 0.720251] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| 260 | [ 0.720272] pci_bus 0000:00: resource 6 [mem 0x10000000-0xfebfffff window] |
| 261 | [ 0.720293] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] |
| 262 | [ 0.720311] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff] |
| 263 | [ 0.720330] pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf7ffffff pref] |
| 264 | [ 0.720782] NET: Registered protocol family 2 |
| 265 | [ 0.726958] TCP established hash table entries: 2048 (order: 1, 8192 bytes) |
| 266 | [ 0.734104] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) |
| 267 | [ 0.740686] TCP: Hash tables configured (established 2048 bind 2048) |
| 268 | [ 0.747290] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| 269 | [ 0.753204] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| 270 | [ 0.760165] NET: Registered protocol family 1 |
| 271 | [ 0.764790] pci 0000:00:01.0: disabling DAC on VIA PCI bridge |
| 272 | [ 0.774048] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 |
| 273 | [ 0.779853] PCI: setting IRQ 11 as level-triggered |
| 274 | [ 0.786950] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 |
| 275 | [ 0.792750] PCI: setting IRQ 10 as level-triggered |
| 276 | [ 0.792782] pci 0000:00:10.2: VIA VLink IRQ fixup, from 5 to 10 |
| 277 | [ 0.801581] pci 0000:00:10.3: VIA VLink IRQ fixup, from 5 to 10 |
| 278 | [ 0.811916] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 |
| 279 | [ 0.817732] pci 0000:00:10.4: VIA VLink IRQ fixup, from 10 to 11 |
| 280 | [ 0.825522] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| 281 | [ 0.833922] PCI: CLS 64 bytes, default 64 |
| 282 | [ 0.834464] Unpacking initramfs... |
| 283 | [ 5.654091] Freeing initrd memory: 17860K (cc729000 - cd89a000) |
| 284 | [ 5.661198] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| 285 | [ 5.672142] audit: initializing netlink subsys (disabled) |
| 286 | [ 5.677826] audit: type=2000 audit(1507211726.675:1): initialized |
| 287 | [ 5.687528] workingset: timestamp_bits=14 max_order=16 bucket_order=2 |
| 288 | [ 5.694264] zbud: loaded |
| 289 | [ 5.704776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| 290 | [ 5.712706] io scheduler noop registered |
| 291 | [ 5.716739] io scheduler deadline registered |
| 292 | [ 5.721238] io scheduler cfq registered (default) |
| 293 | [ 5.727126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 294 | [ 5.732917] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 295 | [ 5.739991] GHES: HEST is not enabled! |
| 296 | [ 5.744035] isapnp: Scanning for PnP cards... |
| 297 | [ 6.103583] isapnp: No Plug & Play device found |
| 298 | [ 6.108856] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 299 | [ 6.136155] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 300 | [ 6.165091] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| 301 | [ 6.175717] Linux agpgart interface v0.103 |
| 302 | [ 6.181211] agpgart: Detected VIA VT3314 chipset |
| 303 | [ 6.191360] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xf8000000 |
| 304 | [ 6.198989] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| 305 | [ 6.206795] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 306 | [ 6.211862] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 307 | [ 6.218729] mousedev: PS/2 mouse device common for all mice |
| 308 | [ 6.224951] rtc_cmos rtc_cmos: RTC can wake from S4 |
| 309 | [ 6.230779] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| 310 | [ 6.237335] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram |
| 311 | [ 6.244500] ledtrig-cpu: registered to indicate activity on CPUs |
| 312 | [ 6.252597] NET: Registered protocol family 10 |
| 313 | [ 6.259658] mip6: Mobile IPv6 |
| 314 | [ 6.262926] NET: Registered protocol family 17 |
| 315 | [ 6.267435] mpls_gso: MPLS GSO support |
| 316 | [ 6.271232] mce: Unable to init device /dev/mcelog (rc: -5) |
| 317 | [ 6.277292] microcode: no support for this CPU vendor |
| 318 | [ 6.282404] Using IPI No-Shortcut mode |
| 319 | [ 6.287667] registered taskstats version 1 |
| 320 | [ 6.292214] zswap: loaded using pool lzo/zbud |
| 321 | [ 6.297158] ima: No TPM chip found, activating TPM-bypass! |
| 322 | [ 6.304528] rtc_cmos rtc_cmos: setting system clock to 2017-10-05 13:55:28 UTC (1507211728) |
| 323 | [ 6.313335] PM: Hibernation image not present or could not be loaded. |
| 324 | [ 6.318259] Freeing unused kernel memory: 752K (cb801000 - cb8bd000) |
| 325 | [ 6.325670] Write protecting the kernel text: 5824k |
| 326 | [ 6.331301] Write protecting the kernel read-only data: 1720k |
| 327 | [ 6.337142] NX-protecting the kernel data: 4416k |
| 328 | [ 6.344273] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| 329 | [ 6.557625] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| 330 | [ 6.577440] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| 331 | [ 6.588623] random: udevadm: uninitialized urandom read (16 bytes read) |
| 332 | [ 6.595812] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| 333 | [ 6.605398] random: udevadm: uninitialized urandom read (16 bytes read) |
| 334 | [ 6.629840] random: udevadm: uninitialized urandom read (16 bytes read) |
| 335 | [ 6.637846] random: udevadm: uninitialized urandom read (16 bytes read) |
| 336 | [ 6.648638] random: udevadm: uninitialized urandom read (16 bytes read) |
| 337 | [ 6.656697] random: udevadm: uninitialized urandom read (16 bytes read) |
| 338 | [ 6.664608] random: udevadm: uninitialized urandom read (16 bytes read) |
| 339 | [ 6.688308] tsc: Refined TSC clocksource calibration: 398.999 MHz |
| 340 | [ 6.694515] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x5c0579e1fc, max_idle_ns: 440795207643 ns |
| 341 | [ 7.101350] SCSI subsystem initialized |
| 342 | [ 7.153999] ACPI: bus type USB registered |
| 343 | [ 7.187746] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker |
| 344 | [ 7.196559] usbcore: registered new interface driver usbfs |
| 345 | [ 7.236563] usbcore: registered new interface driver hub |
| 346 | [ 7.256564] libata version 3.00 loaded. |
| 347 | [ 7.272588] usbcore: registered new device driver usb |
| 348 | [ 7.282172] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x11800, 00:e0:c5:46:8a:3e, IRQ 11 |
| 349 | [ 7.291511] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1 |
| 350 | [ 7.340409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 351 | [ 7.378701] ehci-pci: EHCI PCI platform driver |
| 352 | [ 7.389532] uhci_hcd: USB Universal Host Controller Interface driver |
| 353 | [ 7.412638] alg: skcipher: Chunk test 1 failed on encryption at page 0 for ecb-aes-padlock |
| 354 | [ 7.421057] 00000000: 71 73 f7 db 24 93 21 6d 61 1e bb 63 42 79 db 64 |
| 355 | [ 7.427545] 00000010: 6f 82 c0 ca a3 9b fa 0b d9 08 c7 4a 90 ae 8f 5f |
| 356 | [ 7.432723] 00000020: 5e 06 f0 5f 31 51 18 37 45 d7 ca 3a fd 6c 3f e1 |
| 357 | [ 7.437913] 00000030: dd 8d 22 65 2b 00 50 ce ba 28 67 d7 ce 0e 0d ea |
| 358 | [ 7.443094] 00000040: 78 69 7f ae 8f 8b 69 37 75 e0 dc 96 e0 b7 f4 09 |
| 359 | [ 7.448278] 00000050: cb 6d a2 fb da af 09 f8 81 82 27 fa 45 9c 29 a4 |
| 360 | [ 7.453459] 00000060: 22 8b 78 69 5b 46 f9 39 1b cc f9 1d 09 eb bc 5c |
| 361 | [ 7.458644] 00000070: 41 72 51 97 1d 07 49 a0 1b 8e 65 4b b2 6a 12 03 |
| 362 | [ 7.463816] 00000080: 6a 60 95 ac bd ac 1a 64 de 5a a5 f0 83 2f cb ca |
| 363 | [ 7.468984] 00000090: 22 74 a6 6c 9b 73 ce 3f e1 8b 22 17 59 0c 47 89 |
| 364 | [ 7.474148] 000000a0: 33 a1 d6 47 03 19 4f a8 67 69 f0 5b f0 20 ad 06 |
| 365 | [ 7.479312] 000000b0: 27 81 92 d8 c5 ba 98 12 be 24 b5 2f 75 02 c2 ad |
| 366 | [ 7.484479] 000000c0: 12 2f 07 32 ee 39 af 64 05 8f b3 d4 eb 1b 46 6e |
| 367 | [ 7.489668] 000000d0: d9 21 f9 c4 b7 c9 45 68 b4 a1 74 9f 82 47 eb cc |
| 368 | [ 7.494836] 000000e0: bd 0a 14 95 0f 8b a8 2f 4b 1b a7 bf 82 a6 43 0c |
| 369 | [ 7.500034] 000000f0: b9 39 4a a8 10 6f 50 7b 25 fb 26 81 e0 2f f0 96 |
| 370 | [ 7.505210] 00000100: 8d 8b ac 92 0f f6 ed 64 63 29 4c 8e 18 13 c5 bf |
| 371 | [ 7.510383] 00000110: fc a0 d9 bf 7c 3a 0e 29 6f d1 6c 6f a5 da bf b1 |
| 372 | [ 7.515567] 00000120: 30 ea 44 2d c3 8f 16 e1 66 fa a3 21 3e fc 13 ca |
| 373 | [ 7.520748] 00000130: f0 f6 f0 59 bd 8f 38 50 31 cb 69 3f 96 15 d6 f5 |
| 374 | [ 7.525932] 00000140: ae ff f6 aa 41 85 4c 10 58 e3 f9 44 e6 28 da 9a |
| 375 | [ 7.531113] 00000150: dc 6a 80 34 73 97 1b c5 ca 26 16 77 0e 60 ab 89 |
| 376 | [ 7.536290] 00000160: 0f 04 27 bd ce 3e 71 b4 a0 d7 22 7e db eb 24 70 |
| 377 | [ 7.541471] 00000170: 42 71 51 78 70 b3 e0 3d 84 8e 8d 7b d0 6d ea 92 |
| 378 | [ 7.546643] 00000180: 11 08 42 4f e5 ad 26 92 d2 00 ae a8 e3 4b 37 47 |
| 379 | [ 7.551819] 00000190: 22 c1 95 c1 63 7f cb 03 f3 e3 d7 9d 60 c7 bc ea |
| 380 | [ 7.556992] 000001a0: 35 a2 fd 45 52 39 13 6f c1 53 f3 53 df 33 84 d7 |
| 381 | [ 7.562176] 000001b0: d2 c8 37 b0 75 e3 41 46 b3 c7 83 2e 8a bb a4 e5 |
| 382 | [ 7.567349] 000001c0: 7f 3c fd 8b eb ea 63 bd b7 46 e7 bf 09 9c 0d 0f |
| 383 | [ 7.572533] 000001d0: 33 84 aa 1c 8d 29 b4 ac 4f ad e6 89 |
| 384 | [ 7.580640] sata_via 0000:00:0f.0: version 2.6 |
| 385 | [ 7.582310] sata_via 0000:00:0f.0: VIA VLink IRQ fixup, from 0 to 10 |
| 386 | [ 7.608689] sata_via 0000:00:0f.0: routed to hard irq line 10 |
| 387 | [ 7.647315] scsi host0: sata_via |
| 388 | [ 7.672315] scsi host1: sata_via |
| 389 | [ 7.679448] ata1: SATA max UDMA/133 cmd 0x1ca0 ctl 0x1cb0 bmdma 0x1c80 irq 10 |
| 390 | [ 7.686803] ata2: SATA max UDMA/133 cmd 0x1ca8 ctl 0x1cb4 bmdma 0x1c88 irq 10 |
| 391 | [ 7.742436] pata_via 0000:00:0f.1: version 0.3.4 |
| 392 | [ 7.744647] pata_via 0000:00:0f.1: VIA VLink IRQ fixup, from 255 to 11 |
| 393 | [ 7.755875] clocksource: Switched to clocksource tsc |
| 394 | [ 7.775578] ehci-pci 0000:00:10.4: EHCI Host Controller |
| 395 | [ 7.796512] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1 |
| 396 | [ 7.824642] ehci-pci 0000:00:10.4: irq 11, io mem 0xfd010000 |
| 397 | [ 7.860302] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00 |
| 398 | [ 7.880407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 399 | [ 7.887327] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 400 | [ 7.894605] usb usb1: Product: EHCI Host Controller |
| 401 | [ 7.899523] usb usb1: Manufacturer: Linux 4.9.0-3-686-pae ehci_hcd |
| 402 | [ 7.905738] usb usb1: SerialNumber: 0000:00:10.4 |
| 403 | [ 7.910530] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) |
| 404 | [ 8.014003] hub 1-0:1.0: USB hub found |
| 405 | [ 8.032345] hub 1-0:1.0: 8 ports detected |
| 406 | [ 8.058113] uhci_hcd 0000:00:10.0: UHCI Host Controller |
| 407 | [ 8.079446] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 |
| 408 | [ 8.104381] uhci_hcd 0000:00:10.0: detected 2 ports |
| 409 | [ 8.126194] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001c00 |
| 410 | [ 8.136280] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) |
| 411 | [ 8.170157] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| 412 | [ 8.177138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 413 | [ 8.184453] usb usb2: Product: UHCI Host Controller |
| 414 | [ 8.189380] usb usb2: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd |
| 415 | [ 8.195619] usb usb2: SerialNumber: 0000:00:10.0 |
| 416 | [ 8.259472] padlock_aes: Using VIA PadLock ACE for AES algorithm. |
| 417 | [ 8.273001] hub 2-0:1.0: USB hub found |
| 418 | [ 8.277050] hub 2-0:1.0: 2 ports detected |
| 419 | [ 8.303660] uhci_hcd 0000:00:10.1: UHCI Host Controller |
| 420 | [ 8.314426] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 |
| 421 | [ 8.322131] uhci_hcd 0000:00:10.1: detected 2 ports |
| 422 | [ 8.327739] uhci_hcd 0000:00:10.1: irq 11, io base 0x00001c20 |
| 423 | [ 8.334097] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 |
| 424 | [ 8.340960] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 425 | [ 8.348227] usb usb3: Product: UHCI Host Controller |
| 426 | [ 8.353183] usb usb3: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd |
| 427 | [ 8.359405] usb usb3: SerialNumber: 0000:00:10.1 |
| 428 | [ 8.369451] hub 3-0:1.0: USB hub found |
| 429 | [ 8.373485] hub 3-0:1.0: 2 ports detected |
| 430 | [ 8.380847] uhci_hcd 0000:00:10.2: UHCI Host Controller |
| 431 | [ 8.386215] usb 1-2: new high-speed USB device number 2 using ehci-pci |
| 432 | [ 8.392869] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 |
| 433 | [ 8.400856] uhci_hcd 0000:00:10.2: detected 2 ports |
| 434 | [ 8.405931] uhci_hcd 0000:00:10.2: irq 10, io base 0x00001c40 |
| 435 | [ 8.412460] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| 436 | [ 8.419360] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 437 | [ 8.426730] usb usb4: Product: UHCI Host Controller |
| 438 | [ 8.431673] usb usb4: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd |
| 439 | [ 8.437936] usb usb4: SerialNumber: 0000:00:10.2 |
| 440 | [ 8.447771] hub 4-0:1.0: USB hub found |
| 441 | [ 8.451853] hub 4-0:1.0: 2 ports detected |
| 442 | [ 8.459113] uhci_hcd 0000:00:10.3: UHCI Host Controller |
| 443 | [ 8.465113] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 |
| 444 | [ 8.472660] uhci_hcd 0000:00:10.3: detected 2 ports |
| 445 | [ 8.477681] uhci_hcd 0000:00:10.3: irq 10, io base 0x00001c60 |
| 446 | [ 8.484403] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| 447 | [ 8.491297] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 448 | [ 8.498603] usb usb5: Product: UHCI Host Controller |
| 449 | [ 8.503552] usb usb5: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd |
| 450 | [ 8.509846] usb usb5: SerialNumber: 0000:00:10.3 |
| 451 | [ 8.519820] hub 5-0:1.0: USB hub found |
| 452 | [ 8.523907] hub 5-0:1.0: 2 ports detected |
| 453 | [ 8.562654] usb 1-2: New USB device found, idVendor=174c, idProduct=5136 |
| 454 | [ 8.569639] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 |
| 455 | [ 8.576899] usb 1-2: Product: AS2105 |
| 456 | [ 8.580605] usb 1-2: Manufacturer: ASMedia |
| 457 | [ 8.584762] usb 1-2: SerialNumber: 00000000000000000000 |
| 458 | [ 8.736934] usb-storage 1-2:1.0: USB Mass Storage device detected |
| 459 | [ 8.756962] scsi host2: usb-storage 1-2:1.0 |
| 460 | [ 8.769975] usbcore: registered new interface driver usb-storage |
| 461 | [ 8.799399] usbcore: registered new interface driver uas |
| 462 | [ 9.798391] scsi 2:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 |
| 463 | [ 9.841532] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) |
| 464 | [ 9.865821] sd 2:0:0:0: [sda] Write Protect is off |
| 465 | [ 9.870881] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00 |
| 466 | [ 9.876550] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 467 | [ 10.194282] sda: sda1 sda2 < sda5 > |
| 468 | [ 10.218357] sd 2:0:0:0: [sda] Attached SCSI disk |
| 469 | [ 10.321431] random: fast init done |
| 470 | [ 10.790353] device-mapper: uevent: version 1.0.3 |
| 471 | [ 10.799799] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com |
| 472 | [ 12.415930] PM: Starting manual resume from disk |
| 473 | [ 12.421134] PM: Hibernation image partition 254:1 present |
| 474 | [ 12.421142] PM: Looking for hibernation image. |
| 475 | [ 12.422335] PM: Image not found (code -22) |
| 476 | [ 12.422349] PM: Hibernation image not present or could not be loaded. |
| 477 | [ 13.159248] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) |
| 478 | [ 14.326311] random: crng init done |
| 479 | [ 15.075188] ip_tables: (C) 2000-2006 Netfilter Core Team |
| 480 | [ 15.225923] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| 481 | [ 15.245805] systemd[1]: Detected architecture x86. |
| 482 | [ 15.311932] systemd[1]: Set hostname to <mettigel>. |
| 483 | [ 17.911698] systemd[1]: Listening on Journal Socket (/dev/log). |
| 484 | [ 17.932967] systemd[1]: Listening on fsck to fsckd communication Socket. |
| 485 | [ 17.958210] systemd[1]: Created slice User and Session Slice. |
| 486 | [ 17.981077] systemd[1]: Listening on LVM2 metadata daemon socket. |
| 487 | [ 18.004941] systemd[1]: Listening on Syslog Socket. |
| 488 | [ 18.024974] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| 489 | [ 18.050170] systemd[1]: Created slice System Slice. |
| 490 | [ 18.645757] RPC: Registered named UNIX socket transport module. |
| 491 | [ 18.651987] RPC: Registered udp transport module. |
| 492 | [ 18.656779] RPC: Registered tcp transport module. |
| 493 | [ 18.661596] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 494 | [ 19.062160] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro |
| 495 | [ 20.243865] systemd[1]: Started Load/Save Random Seed. |
| 496 | [ 20.435547] systemd[1]: Started Create Static Device Nodes in /dev. |
| 497 | [ 20.563470] systemd[1]: Starting udev Kernel Device Manager... |
| 498 | [ 20.755705] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. |
| 499 | [ 21.467149] systemd[1]: Started udev Kernel Device Manager. |
| 500 | [ 22.568432] systemd[1]: Started Journal Service. |
| 501 | [ 22.927958] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| 502 | [ 23.040310] ACPI: Power Button [PWRF] |
| 503 | [ 23.220147] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 504 | [ 23.635544] systemd-journald[216]: Received request to flush runtime journal from PID 1 |
| 505 | [ 23.824008] input: PC Speaker as /devices/platform/pcspkr/input/input5 |
| 506 | [ 23.984608] sd 2:0:0:0: Attached scsi generic sg0 type 0 |
| 507 | [ 24.090000] VIA RNG detected |
| 508 | [ 24.309703] hwmon_vid: Using 6-bit VID table for VIA Eden CPU |
| 509 | [ 24.474546] longhaul: Option "enable" not set - Aborting |
| 510 | [ 24.627986] padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms. |
| 511 | [ 24.647499] snd_via82xx 0000:00:11.5: VIA VLink IRQ fixup, from 10 to 11 |
| 512 | [ 27.317327] Adding 258044k swap on /dev/mapper/mettigel--vg-swap_1. Priority:-1 extents:1 across:258044k FS |
| 513 | [ 28.440552] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| 514 | [ 28.546798] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| 515 | [ 29.083469] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) |
| 516 | [ 32.602866] tun: Universal TUN/TAP device driver, 1.6 |
| 517 | [ 32.608384] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| 518 | [ 36.684296] longhaul: Option "enable" not set - Aborting |