Gitiles
Code Review Sign In
review.coreboot.org / board-status / 8e6ad7dfff2177bd6ddd021154676cf466972f9f / . / emulation / qemu-q35 / 4.0-9613-gb11be32 / 2015-05-08T12:47:18Z / kernel_log.txt
blob: e1bfbe618e63457b24ba36bcd90e4d539a412003 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand8e6ad7d2015-05-08 13:47:04 +0000[diff] [blame^]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffaffff] usable
11[ 0.000000] BIOS-e820: [mem 0x000000001ffb0000-0x000000001fffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9559-g3905cae-dirty 04/30/2015
16[ 0.000000] Hypervisor detected: KVM
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x1ffb0 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges disabled:
23[ 0.000000] 00000-FFFFF uncachable
24[ 0.000000] MTRR variable ranges disabled:
25[ 0.000000] 0 disabled
26[ 0.000000] 1 disabled
27[ 0.000000] 2 disabled
28[ 0.000000] 3 disabled
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
34[ 0.000000] CPU MTRRs all blank - virtualized system.
35[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
36[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
37[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
38[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
39[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
40[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
41[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f5fffff]
42[ 0.000000] [mem 0x1f400000-0x1f5fffff] page 2M
43[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f3fffff]
44[ 0.000000] [mem 0x1c000000-0x1f3fffff] page 2M
45[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
46[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
47[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
48[ 0.000000] init_memory_mapping: [mem 0x1f600000-0x1ffaffff]
49[ 0.000000] [mem 0x1f600000-0x1fdfffff] page 2M
50[ 0.000000] [mem 0x1fe00000-0x1ffaffff] page 4k
51[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
52[ 0.000000] RAMDISK: [mem 0x1f602000-0x1fe8bfff]
53[ 0.000000] ACPI: Early table checksum verification disabled
54[ 0.000000] ACPI: RSDP 0x00000000000F1EB0 000024 (v02 CORE )
55[ 0.000000] ACPI: XSDT 0x000000001FFB90E0 000044 (v01 CORE COREBOOT 00000000 CORE 00000000)
56[ 0.000000] ACPI: FACP 0x000000001FFBAD90 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
57[ 0.000000] ACPI: DSDT 0x000000001FFB9250 001B37 (v01 CORE COREBOOT 00000002 INTL 20150204)
58[ 0.000000] ACPI: FACS 0x000000001FFB9210 000040
59[ 0.000000] ACPI: MCFG 0x000000001FFBAE90 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
60[ 0.000000] ACPI: APIC 0x000000001FFBAED0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: HPET 0x000000001FFBAF30 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: Local APIC address 0xfee00000
63[ 0.000000] No NUMA configuration found
64[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffaffff]
65[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ffaffff]
66[ 0.000000] NODE_DATA [mem 0x1ffab000-0x1ffaffff]
67[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
68[ 0.000000] kvm-clock: cpu 0, msr 0:1ffa3001, primary cpu clock
69[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e600000-ffff88001edfffff] on node 0
70[ 0.000000] Zone ranges:
71[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
72[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
73[ 0.000000] Normal empty
74[ 0.000000] Movable zone start for each node
75[ 0.000000] Early memory node ranges
76[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
77[ 0.000000] node 0: [mem 0x00100000-0x1ffaffff]
78[ 0.000000] On node 0 totalpages: 130894
79[ 0.000000] DMA zone: 56 pages used for memmap
80[ 0.000000] DMA zone: 21 pages reserved
81[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
82[ 0.000000] DMA32 zone: 1735 pages used for memmap
83[ 0.000000] DMA32 zone: 126896 pages, LIFO batch:31
84[ 0.000000] ACPI: PM-Timer IO Port: 0x608
85[ 0.000000] ACPI: Local APIC address 0xfee00000
86[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
87[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
88[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
89[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
90[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
91[ 0.000000] ACPI: IRQ0 used by override.
92[ 0.000000] ACPI: IRQ2 used by override.
93[ 0.000000] ACPI: IRQ9 used by override.
94[ 0.000000] Using ACPI (MADT) for SMP configuration information
95[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
96[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
97[ 0.000000] nr_irqs_gsi: 40
98[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
99[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
100[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
101[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
102[ 0.000000] Booting paravirtualized kernel on KVM
103[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
104[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f400000 s80896 r8192 d21504 u2097152
105[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
106[ 0.000000] pcpu-alloc: [0] 0
107[ 0.000000] KVM setup async PF for cpu 0
108[ 0.000000] kvm-stealtime: cpu 0, msr 1f40d080
109[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129082
110[ 0.000000] Policy zone: DMA32
111[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
112[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
113[ 0.000000] AGP: Checking aperture...
114[ 0.000000] AGP: No AGP bridge found
115[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
116[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
117[ 0.000000] Memory: 494932K/523576K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved)
118[ 0.000000] Hierarchical RCU implementation.
119[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
120[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
121[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
122[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
123[ 0.000000] Console: colour VGA+ 80x25
124[ 0.000000] console [tty0] enabled
125[ 0.000000] console [ttyS0] enabled
126[ 0.000000] hpet clockevent registered
127[ 0.000000] tsc: Detected 2311.846 MHz processor
128[ 0.008000] Calibrating delay loop (skipped) preset value.. 4623.69 BogoMIPS (lpj=9247384)
129[ 0.008000] pid_max: default: 32768 minimum: 301
130[ 0.008014] ACPI: Core revision 20140424
131[ 0.010594] ACPI: All ACPI Tables successfully acquired
132[ 0.013359] Security Framework initialized
133[ 0.014626] AppArmor: AppArmor disabled by boot time parameter
134[ 0.016004] Yama: disabled by default; enable with sysctl kernel.yama.*
135[ 0.018172] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
136[ 0.020221] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
137[ 0.021969] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
138[ 0.024007] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
139[ 0.025895] Initializing cgroup subsys memory
140[ 0.027089] Initializing cgroup subsys devices
141[ 0.028014] Initializing cgroup subsys freezer
142[ 0.029199] Initializing cgroup subsys net_cls
143[ 0.030431] Initializing cgroup subsys blkio
144[ 0.032008] Initializing cgroup subsys perf_event
145[ 0.033259] Initializing cgroup subsys net_prio
146[ 0.034615] mce: CPU supports 10 MCE banks
147[ 0.036051] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
148Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
149tlb_flushall_shift: -1
150[ 0.048624] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
151[ 0.055084] ftrace: allocating 21601 entries in 85 pages
152[ 0.068559] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153[ 0.070098] smpboot: CPU0: AMD QEMU Virtual CPU version 2.1.2 (fam: 06, model: 02, stepping: 03)
154[ 0.076000] Performance Events: Broken PMU hardware detected, using software events only.
155[ 0.076000] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
156[ 0.078014] x86: Booted up 1 node, 1 CPUs
157[ 0.079180] smpboot: Total of 1 processors activated (4623.69 BogoMIPS)
158[ 0.080581] NMI watchdog: disabled (cpu0): hardware events not enabled
159[ 0.082635] devtmpfs: initialized
160[ 0.090662] pinctrl core: initialized pinctrl subsystem
161[ 0.092096] NET: Registered protocol family 16
162[ 0.093462] cpuidle: using governor ladder
163[ 0.094626] cpuidle: using governor menu
164[ 0.095891] ACPI: bus type PCI registered
165[ 0.096003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
166[ 0.097661] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
167[ 0.100003] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
168[ 0.102016] PCI: Using configuration type 1 for base access
169[ 0.105015] ACPI: Added _OSI(Module Device)
170[ 0.106203] ACPI: Added _OSI(Processor Device)
171[ 0.108003] ACPI: Added _OSI(3.0 _SCP Extensions)
172[ 0.109257] ACPI: Added _OSI(Processor Aggregator Device)
173[ 0.114557] ACPI: Interpreter enabled
174[ 0.115732] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
175[ 0.117846] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
176[ 0.120836] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
177[ 0.123317] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
178[ 0.125785] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
179[ 0.128011] ACPI: (supports S0)
180[ 0.128959] ACPI: Using IOAPIC for interrupt routing
181[ 0.130240] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
182[ 0.134714] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
183[ 0.136008] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
184[ 0.138400] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
185[ 0.140123] PCI host bridge to bus 0000:00
186[ 0.141287] pci_bus 0000:00: root bus resource [bus 00-ff]
187[ 0.144012] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
188[ 0.145468] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
189[ 0.146933] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
190[ 0.148012] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
191[ 0.149620] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
192[ 0.150046] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
193[ 0.153548] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
194[ 0.157606] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
195[ 0.177329] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
196[ 0.177565] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
197[ 0.181316] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
198[ 0.183735] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
199[ 0.196006] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
200[ 0.196600] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
201[ 0.197039] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
202[ 0.199317] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
203[ 0.200256] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
204[ 0.213203] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
205[ 0.215544] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
206[ 0.217567] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
207[ 0.217781] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
208[ 0.218416] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
209[ 0.221362] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
210[ 0.224139] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
211[ 0.228666] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
212[ 0.230767] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
213[ 0.232901] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
214[ 0.235449] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
215[ 0.237329] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
216[ 0.240064] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
217[ 0.242070] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
218[ 0.243742] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
219[ 0.244804] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
220[ 0.246779] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
221[ 0.248804] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
222[ 0.250685] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
223[ 0.252824] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
224[ 0.255127] ACPI: Enabled 16 GPEs in block 00 to 3F
225[ 0.256167] vgaarb: setting as boot device: PCI:0000:00:01.0
226[ 0.257578] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
227[ 0.260005] vgaarb: loaded
228[ 0.260981] vgaarb: bridge control possible 0000:00:01.0
229[ 0.264082] PCI: Using ACPI for IRQ routing
230[ 0.320382] PCI: pci_cache_line_size set to 64 bytes
231[ 0.320507] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
232[ 0.320510] e820: reserve RAM buffer [mem 0x1ffb0000-0x1fffffff]
233[ 0.320725] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
234[ 0.322399] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
235[ 0.324012] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
236[ 0.330228] Switched to clocksource kvm-clock
237[ 0.337451] pnp: PnP ACPI init
238[ 0.338485] ACPI: bus type PNP registered
239[ 0.339655] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
240[ 0.339729] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
241[ 0.339784] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
242[ 0.339909] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
243[ 0.339988] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
244[ 0.340354] pnp: PnP ACPI: found 5 devices
245[ 0.341533] ACPI: bus type PNP unregistered
246[ 0.349984] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
247[ 0.351420] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
248[ 0.351422] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
249[ 0.351425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
250[ 0.351427] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
251[ 0.351465] NET: Registered protocol family 2
252[ 0.352907] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
253[ 0.354509] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
254[ 0.356029] TCP: Hash tables configured (established 4096 bind 4096)
255[ 0.357589] TCP: reno registered
256[ 0.358565] UDP hash table entries: 256 (order: 1, 8192 bytes)
257[ 0.360025] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258[ 0.361860] NET: Registered protocol family 1
259[ 0.363196] pci 0000:00:01.0: Video device with shadowed ROM
260[ 0.363258] PCI: CLS 64 bytes, default 64
261[ 0.363316] Unpacking initramfs...
262[ 0.565958] Freeing initrd memory: 8744K (ffff88001f602000 - ffff88001fe8c000)
263[ 0.568391] microcode: AMD CPU family 0x6 not supported
264[ 0.570109] futex hash table entries: 256 (order: 2, 16384 bytes)
265[ 0.571659] audit: initializing netlink subsys (disabled)
266[ 0.573479] audit: type=2000 audit(1431092354.611:1): initialized
267[ 0.575293] HugeTLB registered 2 MB page size, pre-allocated 0 pages
268[ 0.576924] zbud: loaded
269[ 0.578032] VFS: Disk quotas dquot_6.5.2
270[ 0.579140] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
271[ 0.580793] msgmni has been set to 983
272[ 0.582256] alg: No test for stdrng (krng)
273[ 0.583482] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
274[ 0.586034] io scheduler noop registered
275[ 0.587173] io scheduler deadline registered
276[ 0.588599] io scheduler cfq registered (default)
277[ 0.590201] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
278[ 0.591635] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
279[ 0.593339] GHES: HEST is not enabled!
280[ 0.594533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
281[ 0.908542] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
282[ 0.911252] Linux agpgart interface v0.103
283[ 0.912638] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
284[ 0.915800] serio: i8042 KBD port at 0x60,0x64 irq 1
285[ 0.917422] serio: i8042 AUX port at 0x60,0x64 irq 12
286[ 0.919302] mousedev: PS/2 mouse device common for all mice
287[ 0.921480] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
288[ 0.924031] rtc_cmos 00:00: RTC can wake from S4
289[ 0.925681] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
290[ 0.927860] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
291[ 0.930116] ledtrig-cpu: registered to indicate activity on CPUs
292[ 0.931692] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
293[ 0.933575] AMD IOMMUv2 functionality not available on this system
294[ 0.935219] TCP: cubic registered
295[ 0.936377] NET: Registered protocol family 10
296[ 0.937929] mip6: Mobile IPv6
297[ 0.938948] NET: Registered protocol family 17
298[ 0.940453] mpls_gso: MPLS GSO support
299[ 0.941941] registered taskstats version 1
300[ 0.943646] rtc_cmos 00:00: setting system clock to 2015-05-08 13:39:14 UTC (1431092354)
301[ 0.946071] PM: Hibernation image not present or could not be loaded.
302[ 0.947795] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
303[ 0.950324] Write protecting the kernel read-only data: 8192k
304[ 0.954516] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
305[ 0.957412] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
306[ 0.972259] systemd-udevd[52]: starting version 215
307[ 0.974005] random: systemd-udevd urandom read with 2 bits of entropy available
308[ 0.989338] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
309[ 0.991109] e1000: Copyright (c) 1999-2006 Intel Corporation.
310[ 1.001502] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
311[ 1.391936] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
312[ 1.393694] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
313[ 1.401703] FS-Cache: Loaded
314[ 1.406330] RPC: Registered named UNIX socket transport module.
315[ 1.407886] RPC: Registered udp transport module.
316[ 1.409253] RPC: Registered tcp transport module.
317[ 1.410719] RPC: Registered tcp NFSv4.1 backchannel transport module.
318[ 1.417052] FS-Cache: Netfs 'nfs' registered for caching
319[ 1.428421] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
320[ 1.568116] tsc: Refined TSC clocksource calibration: 2312.031 MHz
321[ 3.432820] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
322[ 3.437756] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
323[ 8.783260] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
324[ 8.789341] systemd[1]: Detected virtualization 'kvm'.
325[ 8.791860] systemd[1]: Detected architecture 'x86-64'.
326[ 11.034351] random: nonblocking pool is initialized
327[ 11.206083] systemd[1]: Inserted module 'autofs4'
328[ 11.240481] systemd[1]: Set hostname to <cb-test-tgt>.
329[ 13.678078] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
330[ 13.682475] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
331[ 13.687017] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
332[ 13.689301] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
333[ 13.691447] systemd[1]: Expecting device dev-ttyS0.device...
334[ 13.694304] systemd[1]: Starting Remote File Systems (Pre).
335[ 13.697337] systemd[1]: Reached target Remote File Systems (Pre).
336[ 13.698838] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
337[ 13.701177] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
338[ 13.703379] systemd[1]: Starting Paths.
339[ 13.705942] systemd[1]: Reached target Paths.
340[ 13.707228] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
341[ 13.711472] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
342[ 13.714034] systemd[1]: Starting Encrypted Volumes.
343[ 13.717060] systemd[1]: Reached target Encrypted Volumes.
344[ 13.718477] systemd[1]: Starting Swap.
345[ 13.721050] systemd[1]: Reached target Swap.
346[ 13.722252] systemd[1]: Starting Root Slice.
347[ 13.724930] systemd[1]: Created slice Root Slice.
348[ 13.726201] systemd[1]: Starting User and Session Slice.
349[ 13.729116] systemd[1]: Created slice User and Session Slice.
350[ 13.730542] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
351[ 13.735159] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
352[ 13.736876] systemd[1]: Starting Delayed Shutdown Socket.
353[ 13.739690] systemd[1]: Listening on Delayed Shutdown Socket.
354[ 13.741205] systemd[1]: Starting Journal Socket (/dev/log).
355[ 13.745589] systemd[1]: Listening on Journal Socket (/dev/log).
356[ 13.747049] systemd[1]: Starting udev Control Socket.
357[ 13.749874] systemd[1]: Listening on udev Control Socket.
358[ 13.751227] systemd[1]: Starting udev Kernel Socket.
359[ 13.754788] systemd[1]: Listening on udev Kernel Socket.
360[ 13.757192] systemd[1]: Starting Journal Socket.
361[ 13.761548] systemd[1]: Listening on Journal Socket.
362[ 13.763733] systemd[1]: Starting System Slice.
363[ 13.766967] systemd[1]: Created slice System Slice.
364[ 13.768310] systemd[1]: Starting system-getty.slice.
365[ 13.771208] systemd[1]: Created slice system-getty.slice.
366[ 13.772662] systemd[1]: Starting system-serial\x2dgetty.slice.
367[ 13.775663] systemd[1]: Created slice system-serial\x2dgetty.slice.
368[ 13.777281] systemd[1]: Starting Increase datagram queue length...
369[ 13.780673] systemd[1]: Mounting Huge Pages File System...
370[ 13.783789] systemd[1]: Mounting POSIX Message Queue File System...
371[ 13.794062] systemd[1]: Starting Create list of required static device nodes for the current kernel...
372[ 13.799508] systemd[1]: Mounting Debug File System...
373[ 14.053983] systemd[1]: Started Set Up Additional Binary Formats.
374[ 15.492112] systemd[1]: Starting Load Kernel Modules...
375[ 15.499079] systemd[1]: Starting udev Coldplug all Devices...
376[ 15.505662] systemd[1]: Starting Slices.
377[ 15.508371] systemd[1]: Reached target Slices.
378[ 15.509658] systemd[1]: Starting Remount Root and Kernel File Systems...
379[ 15.516965] systemd[1]: Started Create list of required static device nodes for the current kernel.
380[ 15.525412] systemd[1]: Starting Create Static Device Nodes in /dev...
381[ 16.018746] systemd[1]: Started Increase datagram queue length.
382[ 16.022035] systemd[1]: Starting Syslog Socket.
383[ 16.025175] systemd[1]: Listening on Syslog Socket.
384[ 16.026489] systemd[1]: Starting Sockets.
385[ 16.029036] systemd[1]: Reached target Sockets.
386[ 16.030415] systemd[1]: Starting Journal Service...
387[ 16.034810] systemd[1]: Started Journal Service.
388[ 20.024191] systemd-udevd[126]: starting version 215
389[ 20.054877] systemd-journald[114]: Received request to flush runtime journal from PID 1
390[ 29.652087] nfs: server 10.100.1.1 not responding, still trying
391[ 29.654707] nfs: server 10.100.1.1 not responding, still trying
392[ 29.657535] nfs: server 10.100.1.1 not responding, still trying
393[ 29.659865] nfs: server 10.100.1.1 not responding, still trying
394[ 29.662473] nfs: server 10.100.1.1 not responding, still trying
395[ 29.665073] nfs: server 10.100.1.1 not responding, still trying
396[ 29.666917] nfs: server 10.100.1.1 not responding, still trying
397[ 29.672373] nfs: server 10.100.1.1 OK
398[ 29.725798] nfs: server 10.100.1.1 OK
399[ 29.810656] nfs: server 10.100.1.1 OK
400[ 29.873921] nfs: server 10.100.1.1 OK
401[ 29.938562] nfs: server 10.100.1.1 OK
402[ 30.001877] nfs: server 10.100.1.1 OK
403[ 30.056923] nfs: server 10.100.1.1 OK
404[ 31.800078] nfs: server 10.100.1.1 not responding, still trying
405[ 31.803049] nfs: server 10.100.1.1 not responding, still trying
406[ 31.806353] nfs: server 10.100.1.1 not responding, still trying
407[ 31.809359] nfs: server 10.100.1.1 not responding, still trying
408[ 31.812325] nfs: server 10.100.1.1 not responding, still trying
409[ 32.234598] nfs: server 10.100.1.1 OK
410[ 32.282681] nfs: server 10.100.1.1 OK
411[ 32.346999] nfs: server 10.100.1.1 OK
412[ 32.417176] nfs: server 10.100.1.1 OK
413[ 32.456077] nfs: server 10.100.1.1 OK
414[ 32.572091] nfs: server 10.100.1.1 not responding, still trying
415[ 32.752519] nfs: server 10.100.1.1 OK
416[ 34.945460] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
417[ 34.947642] ACPI: Power Button [PWRF]
418[ 35.106678] input: PC Speaker as /devices/platform/pcspkr/input/input3
419[ 35.135188] parport_pc 00:03: reported by Plug and Play ACPI
420[ 35.141136] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
421[ 35.935769] Floppy drive(s): fd0 is 1.44M
422[ 35.952987] FDC 0 is a S82078B
423[ 36.494019] SCSI subsystem initialized
424[ 36.686517] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
425[ 36.778315] [drm] Initialized drm 1.1.0 20060810
426[ 37.348630] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
427[ 37.354707] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
428[ 37.357384] i801_smbus 0000:00:1f.3: Enabling SMBus device
429[ 37.358859] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
430[ 37.391687] libata version 3.00 loaded.
431[ 37.473972] ppdev: user-space parallel port driver
432[ 37.534234] iTCO_vendor_support: vendor-support=0
433[ 39.418341] ahci 0000:00:1f.2: version 3.0
434[ 39.421211] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
435[ 39.422133] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
436[ 39.426577] ahci 0000:00:1f.2: flags: ncq only
437[ 39.433766] scsi0 : ahci
438[ 39.434936] scsi1 : ahci
439[ 39.436000] scsi2 : ahci
440[ 39.437296] scsi3 : ahci
441[ 39.438361] scsi4 : ahci
442[ 39.439436] scsi5 : ahci
443[ 39.440467] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
444[ 39.442648] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
445[ 39.444818] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
446[ 39.446978] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
447[ 39.449537] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
448[ 39.451879] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
449[ 39.455844] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
450[ 39.458050] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
451[ 39.460014] iTCO_wdt: timeout value out of range, using 30
452[ 39.462138] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
453[ 39.628456] kvm: Nested Virtualization enabled
454[ 39.776330] ata1: SATA link down (SStatus 0 SControl 300)
455[ 39.779522] ata2: SATA link down (SStatus 0 SControl 300)
456[ 39.784185] ata3: SATA link down (SStatus 0 SControl 300)
457[ 39.785903] ata4: SATA link down (SStatus 0 SControl 300)
458[ 39.787448] ata5: SATA link down (SStatus 0 SControl 300)
459[ 39.789021] ata6: SATA link down (SStatus 0 SControl 300)
460[ 80.693284] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
461[ 226.356087] nfs: server 10.100.1.1 not responding, still trying
462[ 226.358767] nfs: server 10.100.1.1 not responding, still trying
463[ 226.361926] nfs: server 10.100.1.1 not responding, still trying
464[ 226.364678] nfs: server 10.100.1.1 not responding, still trying
465[ 226.366742] nfs: server 10.100.1.1 not responding, still trying
466[ 226.368913] nfs: server 10.100.1.1 not responding, still trying
467[ 226.370695] nfs: server 10.100.1.1 not responding, still trying
468[ 226.371757] nfs: server 10.100.1.1 not responding, still trying
469[ 226.373419] nfs: server 10.100.1.1 not responding, still trying
470[ 226.374868] nfs: server 10.100.1.1 not responding, still trying
471[ 226.376230] nfs: server 10.100.1.1 not responding, still trying
472[ 226.377321] nfs: server 10.100.1.1 not responding, still trying
473[ 226.378421] nfs: server 10.100.1.1 not responding, still trying
474[ 226.379541] nfs: server 10.100.1.1 not responding, still trying
475[ 226.380868] nfs: server 10.100.1.1 not responding, still trying
476[ 227.191299] nfs: server 10.100.1.1 OK
477[ 227.296651] nfs: server 10.100.1.1 OK
478[ 227.402029] nfs: server 10.100.1.1 OK
479[ 227.476098] nfs: server 10.100.1.1 not responding, still trying
480[ 227.478030] nfs: server 10.100.1.1 not responding, still trying
481[ 227.480897] nfs: server 10.100.1.1 not responding, still trying
482[ 227.483273] nfs: server 10.100.1.1 not responding, still trying
483[ 227.486330] nfs: server 10.100.1.1 not responding, still trying
484[ 227.487900] nfs: server 10.100.1.1 not responding, still trying
485[ 227.489545] nfs: server 10.100.1.1 not responding, still trying
486[ 227.490926] nfs: server 10.100.1.1 not responding, still trying
487[ 227.492674] nfs: server 10.100.1.1 not responding, still trying
488[ 227.494115] nfs: server 10.100.1.1 not responding, still trying
489[ 227.495532] nfs: server 10.100.1.1 not responding, still trying
490[ 227.497488] nfs: server 10.100.1.1 not responding, still trying
491[ 227.498903] nfs: server 10.100.1.1 not responding, still trying
492[ 227.500431] nfs: server 10.100.1.1 not responding, still trying
493[ 227.501843] nfs: server 10.100.1.1 not responding, still trying
494[ 227.534115] nfs: server 10.100.1.1 OK
495[ 227.653300] nfs: server 10.100.1.1 OK
496[ 227.740227] nfs: server 10.100.1.1 OK
497[ 227.847293] nfs: server 10.100.1.1 OK
498[ 227.980875] nfs: server 10.100.1.1 OK
499[ 228.089031] nfs: server 10.100.1.1 OK
500[ 228.201729] nfs: server 10.100.1.1 OK
501[ 228.309138] nfs: server 10.100.1.1 OK
502[ 228.413889] nfs: server 10.100.1.1 OK
503[ 228.499596] nfs: server 10.100.1.1 OK
504[ 228.554589] nfs: server 10.100.1.1 OK
505[ 228.708359] nfs: server 10.100.1.1 OK
506[ 230.261054] nfs: server 10.100.1.1 OK
507[ 230.392037] nfs: server 10.100.1.1 OK
508[ 230.500077] nfs: server 10.100.1.1 OK
509[ 230.560102] nfs: server 10.100.1.1 not responding, still trying
510[ 230.601039] nfs: server 10.100.1.1 OK
511[ 230.703728] nfs: server 10.100.1.1 OK
512[ 230.819811] nfs: server 10.100.1.1 OK
513[ 230.927816] nfs: server 10.100.1.1 OK
514[ 231.035302] nfs: server 10.100.1.1 OK
515[ 231.068084] nfs: server 10.100.1.1 not responding, still trying
516[ 231.131393] nfs: server 10.100.1.1 OK
517[ 231.255439] nfs: server 10.100.1.1 OK
518[ 231.348404] nfs: server 10.100.1.1 OK
519[ 231.441538] nfs: server 10.100.1.1 OK
520[ 231.534759] nfs: server 10.100.1.1 OK
521[ 231.637837] nfs: server 10.100.1.1 OK
522[ 231.722857] nfs: server 10.100.1.1 OK
523[ 232.916091] nfs: server 10.100.1.1 not responding, still trying
524[ 232.919132] nfs: server 10.100.1.1 not responding, still trying
525[ 232.922486] nfs: server 10.100.1.1 not responding, still trying
526[ 232.924190] nfs: server 10.100.1.1 not responding, still trying
527[ 235.305246] nfs: server 10.100.1.1 OK
528[ 235.932091] nfs: server 10.100.1.1 not responding, still trying
529[ 235.935461] nfs: server 10.100.1.1 not responding, still trying
530[ 235.939118] nfs: server 10.100.1.1 not responding, still trying
531[ 235.942326] nfs: server 10.100.1.1 not responding, still trying
532[ 235.945440] nfs: server 10.100.1.1 not responding, still trying
533[ 235.947856] nfs: server 10.100.1.1 not responding, still trying
534[ 235.950062] nfs: server 10.100.1.1 not responding, still trying
535[ 235.951602] nfs: server 10.100.1.1 not responding, still trying
536[ 235.953287] nfs: server 10.100.1.1 not responding, still trying
537[ 235.954820] nfs: server 10.100.1.1 not responding, still trying
538[ 236.098834] nfs: server 10.100.1.1 OK
539[ 239.124178] nfs: server 10.100.1.1 OK
540[ 239.182028] nfs: server 10.100.1.1 OK
541[ 239.236908] nfs: server 10.100.1.1 OK
542[ 239.296282] nfs: server 10.100.1.1 OK
543[ 239.508102] nfs: server 10.100.1.1 not responding, still trying
544[ 240.300087] nfs: server 10.100.1.1 not responding, still trying
545[ 240.922744] nfs: server 10.100.1.1 OK
546[ 241.003781] nfs: server 10.100.1.1 OK
547[ 241.063751] nfs: server 10.100.1.1 OK
548[ 241.113814] nfs: server 10.100.1.1 OK
549[ 241.199788] nfs: server 10.100.1.1 OK
550[ 241.283883] nfs: server 10.100.1.1 OK
551[ 241.377911] nfs: server 10.100.1.1 OK
552[ 241.436781] nfs: server 10.100.1.1 OK
553[ 241.505064] nfs: server 10.100.1.1 OK
554[ 241.523173] nfs: server 10.100.1.1 OK
555[ 243.215653] nfs: server 10.100.1.1 OK
556[ 243.540088] nfs: server 10.100.1.1 not responding, still trying
557[ 244.076053] nfs: server 10.100.1.1 OK
558[ 245.584098] nfs: server 10.100.1.1 not responding, still trying
559[ 245.693185] nfs: server 10.100.1.1 OK
560[ 246.837531] nfs: server 10.100.1.1 OK