blob: 00f100ae1bdaae53f1de1295b8717f253ac32790 [file] [log] [blame]
Edward O'Callaghan919fa0a2014-03-29 14:46:10 +11001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.13.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014
5[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda2 rw initrd=../initramfs-linux.img
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c715dfff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000c715e000-0x00000000dfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
14[ 0.000000] NX (Execute Disable) protection: active
15[ 0.000000] SMBIOS 2.7 present.
16[ 0.000000] DMI: Jetway NF81-T56N-LF/NF81-T56N-LF, BIOS ap-jupiter-alpha 03/29/2014
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges enabled:
23[ 0.000000] 00000-9FFFF write-back
24[ 0.000000] A0000-BFFFF uncachable
25[ 0.000000] C0000-FFFFF write-back
26[ 0.000000] MTRR variable ranges enabled:
27[ 0.000000] 0 base 000000000 mask F80000000 write-back
28[ 0.000000] 1 base 080000000 mask FC0000000 write-back
29[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
30[ 0.000000] 3 disabled
31[ 0.000000] 4 disabled
32[ 0.000000] 5 disabled
33[ 0.000000] 6 base 0FFE00000 mask FFFE00000 write-protect
34[ 0.000000] 7 disabled
35[ 0.000000] TOM2: 000000019f000000 aka 6640M
36[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
37[ 0.000000] e820: last_pfn = 0xc715e max_arch_pfn = 0x400000000
38[ 0.000000] found SMP MP-table at [mem 0x000f0e00-0x000f0e0f] mapped at [ffff8800000f0e00]
39[ 0.000000] Scanning 1 areas for low memory corruption
40[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
41[ 0.000000] Using GB pages for direct mapping
42[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
43[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
44[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
45[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
46[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x19ee00000-0x19effffff]
48[ 0.000000] [mem 0x19ee00000-0x19effffff] page 2M
49[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
50[ 0.000000] init_memory_mapping: [mem 0x19c000000-0x19edfffff]
51[ 0.000000] [mem 0x19c000000-0x19edfffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff]
53[ 0.000000] [mem 0x180000000-0x19bffffff] page 2M
54[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc715dfff]
55[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
56[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
57[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
58[ 0.000000] [mem 0xc0000000-0xc6ffffff] page 2M
59[ 0.000000] [mem 0xc7000000-0xc715dfff] page 4k
60[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
61[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
62[ 0.000000] RAMDISK: [mem 0x7fd35000-0x7fffffff]
63[ 0.000000] ACPI: RSDP 00000000000f0de0 000014 (v00 CORE )
64[ 0.000000] ACPI: RSDT 00000000c7163c24 000040 (v01 CORE COREBOOT 00000000 CORE 00000000)
65[ 0.000000] ACPI: FACP 00000000c7166590 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: DSDT 00000000c7163cc8 002886 (v02 AMD COREBOOT 00010001 INTL 20140114)
67[ 0.000000] ACPI: FACS 00000000c7166550 000040
68[ 0.000000] ACPI: HPET 00000000c7166688 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: APIC 00000000c71666c0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: HEST 00000000c7166720 000198 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SSDT 00000000c71668c0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
72[ 0.000000] ACPI: SSDT 00000000c7167f50 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
73[ 0.000000] ACPI: SSDT 00000000c7168330 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
74[ 0.000000] ACPI: Local APIC address 0xfee00000
75[ 0.000000] No NUMA configuration found
76[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff]
77[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19effffff]
78[ 0.000000] NODE_DATA [mem 0x19eff9000-0x19effdfff]
79[ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880198c00000-ffff88019e5fffff] on node 0
80[ 0.000000] Zone ranges:
81[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
82[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
83[ 0.000000] Normal [mem 0x100000000-0x19effffff]
84[ 0.000000] Movable zone start for each node
85[ 0.000000] Early memory node ranges
86[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
87[ 0.000000] node 0: [mem 0x00100000-0xc715dfff]
88[ 0.000000] node 0: [mem 0x100000000-0x19effffff]
89[ 0.000000] On node 0 totalpages: 1466620
90[ 0.000000] DMA zone: 64 pages used for memmap
91[ 0.000000] DMA zone: 21 pages reserved
92[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
93[ 0.000000] DMA32 zone: 12678 pages used for memmap
94[ 0.000000] DMA32 zone: 811358 pages, LIFO batch:31
95[ 0.000000] Normal zone: 10176 pages used for memmap
96[ 0.000000] Normal zone: 651264 pages, LIFO batch:31
97[ 0.000000] ACPI: PM-Timer IO Port: 0x808
98[ 0.000000] ACPI: Local APIC address 0xfee00000
99[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
100[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
101[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
102[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
103[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
104[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
105[ 0.000000] ACPI: IRQ0 used by override.
106[ 0.000000] ACPI: IRQ2 used by override.
107[ 0.000000] ACPI: IRQ9 used by override.
108[ 0.000000] Using ACPI (MADT) for SMP configuration information
109[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
110[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
111[ 0.000000] nr_irqs_gsi: 40
112[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
113[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
114[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
115[ 0.000000] PM: Registered nosave memory: [mem 0xc715e000-0xdfffffff]
116[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
117[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff]
118[ 0.000000] PM: Registered nosave memory: [mem 0xf9000000-0xffffffff]
119[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
120[ 0.000000] Booting paravirtualized kernel on bare hardware
121[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
122[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88019ec00000 s86336 r8192 d24256 u1048576
123[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
124[ 0.000000] pcpu-alloc: [0] 0 1
125[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1443681
126[ 0.000000] Policy zone: Normal
127[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda2 rw initrd=../initramfs-linux.img
128[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
129[ 0.000000] Checking aperture...
130[ 0.000000] No AGP bridge found
131[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
132[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
133[ 0.000000] Memory: 5693276K/5866480K available (5271K kernel code, 836K rwdata, 1676K rodata, 1128K init, 1324K bss, 173204K reserved)
134[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
135[ 0.000000] Preemptible hierarchical RCU implementation.
136[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
137[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
138[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
139[ 0.000000] NR_IRQS:8448 nr_irqs:512 16
140[ 0.000000] Console: colour VGA+ 80x25
141[ 0.000000] console [tty0] enabled
142[ 0.000000] allocated 23592960 bytes of page_cgroup
143[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
144[ 0.000000] hpet clockevent registered
145[ 0.000000] tsc: Fast TSC calibration using PIT
146[ 0.003333] tsc: Detected 1649.946 MHz processor
147[ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3301.38 BogoMIPS (lpj=5499820)
148[ 0.000013] pid_max: default: 32768 minimum: 301
149[ 0.000072] Security Framework initialized
150[ 0.000094] AppArmor: AppArmor disabled by boot time parameter
151[ 0.000097] Yama: becoming mindful.
152[ 0.001166] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
153[ 0.007321] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
154[ 0.010132] Mount-cache hash table entries: 256
155[ 0.010549] Initializing cgroup subsys memory
156[ 0.010565] Initializing cgroup subsys devices
157[ 0.010570] Initializing cgroup subsys freezer
158[ 0.010573] Initializing cgroup subsys net_cls
159[ 0.010577] Initializing cgroup subsys blkio
160[ 0.010623] tseg: 0000000000
161[ 0.010636] CPU: Physical Processor ID: 0
162[ 0.010638] CPU: Processor Core ID: 0
163[ 0.010642] mce: CPU supports 6 MCE banks
164[ 0.010659] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
165Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
166tlb_flushall_shift: 5
167[ 0.010830] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
168[ 0.013182] ACPI: Core revision 20131115
169[ 0.017461] ACPI: All ACPI Tables successfully acquired
170[ 0.017474] ftrace: allocating 21068 entries in 83 pages
171[ 0.038692] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
172[ 0.071728] smpboot: CPU0: AMD G-T56N Processor (fam: 14, model: 02, stepping: 00)
173[ 0.176194] Performance Events: AMD PMU driver.
174[ 0.176204] ... version: 0
175[ 0.176207] ... bit width: 48
176[ 0.176210] ... generic registers: 4
177[ 0.176212] ... value mask: 0000ffffffffffff
178[ 0.176215] ... max period: 00007fffffffffff
179[ 0.176217] ... fixed-purpose events: 0
180[ 0.176220] ... event mask: 000000000000000f
181[ 0.193191] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
182[ 0.199946] x86: Booting SMP configuration:
183[ 0.199956] .... node #0, CPUs: #1
184[ 0.213233] x86: Booted up 1 node, 2 CPUs
185[ 0.213238] smpboot: Total of 2 processors activated (6602.77 BogoMIPS)
186[ 0.214175] devtmpfs: initialized
187[ 0.223301] RTC time: 3:15:14, date: 03/29/14
188[ 0.223433] NET: Registered protocol family 16
189[ 0.223690] cpuidle: using governor ladder
190[ 0.223694] cpuidle: using governor menu
191[ 0.223849] ACPI: bus type PCI registered
192[ 0.223854] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
193[ 0.223986] PCI: Using configuration type 1 for base access
194[ 0.223988] PCI: Using configuration type 1 for extended access
195[ 0.225351] bio: create slab <bio-0> at 0
196[ 0.225750] ACPI: Added _OSI(Module Device)
197[ 0.225759] ACPI: Added _OSI(Processor Device)
198[ 0.225762] ACPI: Added _OSI(3.0 _SCP Extensions)
199[ 0.225766] ACPI: Added _OSI(Processor Aggregator Device)
200[ 0.228021] ACPI: Executed 2 blocks of module-level executable AML code
201[ 0.231712] ACPI: Interpreter enabled
202[ 0.231733] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
203[ 0.231760] ACPI: (supports S0 S1 S3 S4 S5)
204[ 0.231764] ACPI: Using IOAPIC for interrupt routing
205[ 0.231797] HEST: Table parsing has been initialized.
206[ 0.231804] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
207[ 0.231954] ACPI: No dock devices found.
208[ 0.247724] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
209[ 0.247739] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
210[ 0.247879] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
211[ 0.248431] PCI host bridge to bus 0000:00
212[ 0.248438] pci_bus 0000:00: root bus resource [bus 00-ff]
213[ 0.248443] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
214[ 0.248447] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
215[ 0.248451] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
216[ 0.248455] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
217[ 0.248471] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
218[ 0.248651] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
219[ 0.248668] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
220[ 0.248678] pci 0000:00:01.0: reg 0x14: [io 0x3000-0x30ff]
221[ 0.248689] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
222[ 0.248752] pci 0000:00:01.0: supports D1 D2
223[ 0.248838] pci 0000:00:01.0: System wakeup disabled by ACPI
224[ 0.248934] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400
225[ 0.249013] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
226[ 0.249104] pci 0000:00:06.0: System wakeup disabled by ACPI
227[ 0.249211] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
228[ 0.249239] pci 0000:00:11.0: reg 0x10: [io 0x3410-0x3417]
229[ 0.249253] pci 0000:00:11.0: reg 0x14: [io 0x3420-0x3423]
230[ 0.249267] pci 0000:00:11.0: reg 0x18: [io 0x3418-0x341f]
231[ 0.249282] pci 0000:00:11.0: reg 0x1c: [io 0x3424-0x3427]
232[ 0.249296] pci 0000:00:11.0: reg 0x20: [io 0x3400-0x340f]
233[ 0.249310] pci 0000:00:11.0: reg 0x24: [mem 0xf0248000-0xf02483ff]
234[ 0.249517] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
235[ 0.249538] pci 0000:00:12.0: reg 0x10: [mem 0xf0244000-0xf0244fff]
236[ 0.249702] pci 0000:00:12.0: System wakeup disabled by ACPI
237[ 0.249777] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
238[ 0.249804] pci 0000:00:12.2: reg 0x10: [mem 0xf0248400-0xf02484ff]
239[ 0.249915] pci 0000:00:12.2: supports D1 D2
240[ 0.249919] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
241[ 0.250006] pci 0000:00:12.2: System wakeup disabled by ACPI
242[ 0.250095] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
243[ 0.250115] pci 0000:00:13.0: reg 0x10: [mem 0xf0245000-0xf0245fff]
244[ 0.250266] pci 0000:00:13.0: System wakeup disabled by ACPI
245[ 0.250366] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
246[ 0.250393] pci 0000:00:13.2: reg 0x10: [mem 0xf0248500-0xf02485ff]
247[ 0.250503] pci 0000:00:13.2: supports D1 D2
248[ 0.250508] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
249[ 0.250595] pci 0000:00:13.2: System wakeup disabled by ACPI
250[ 0.250684] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
251[ 0.250915] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
252[ 0.250946] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
253[ 0.251035] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
254[ 0.251191] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
255[ 0.251417] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
256[ 0.251542] pci 0000:00:14.4: System wakeup disabled by ACPI
257[ 0.251605] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
258[ 0.251625] pci 0000:00:14.5: reg 0x10: [mem 0xf0246000-0xf0246fff]
259[ 0.251778] pci 0000:00:14.5: System wakeup disabled by ACPI
260[ 0.251867] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
261[ 0.251973] pci 0000:00:15.0: supports D1 D2
262[ 0.252066] pci 0000:00:15.0: System wakeup disabled by ACPI
263[ 0.252159] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
264[ 0.252179] pci 0000:00:16.0: reg 0x10: [mem 0xf0247000-0xf0247fff]
265[ 0.252332] pci 0000:00:16.0: System wakeup disabled by ACPI
266[ 0.252420] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
267[ 0.252447] pci 0000:00:16.2: reg 0x10: [mem 0xf0248600-0xf02486ff]
268[ 0.252557] pci 0000:00:16.2: supports D1 D2
269[ 0.252561] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
270[ 0.252648] pci 0000:00:16.2: System wakeup disabled by ACPI
271[ 0.252720] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
272[ 0.252876] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
273[ 0.253042] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
274[ 0.253201] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
275[ 0.253365] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
276[ 0.253515] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
277[ 0.253664] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
278[ 0.253811] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
279[ 0.254083] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
280[ 0.254104] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
281[ 0.254136] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
282[ 0.254157] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
283[ 0.254237] pci 0000:01:00.0: supports D1 D2
284[ 0.254241] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
285[ 0.259787] pci 0000:00:06.0: PCI bridge to [bus 01]
286[ 0.259813] pci 0000:00:06.0: bridge window [io 0x1000-0x1fff]
287[ 0.259832] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
288[ 0.260017] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
289[ 0.260031] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
290[ 0.260036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
291[ 0.260040] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
292[ 0.260045] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
293[ 0.260165] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
294[ 0.260194] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
295[ 0.260235] pci 0000:03:00.0: reg 0x18: [mem 0xf0104000-0xf0104fff 64bit pref]
296[ 0.260260] pci 0000:03:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
297[ 0.260371] pci 0000:03:00.0: supports D1 D2
298[ 0.260375] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
299[ 0.266479] pci 0000:00:15.0: PCI bridge to [bus 03]
300[ 0.266506] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
301[ 0.266524] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
302[ 0.267080] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
303[ 0.267191] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
304[ 0.267296] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
305[ 0.267400] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
306[ 0.267502] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
307[ 0.267604] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
308[ 0.267700] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
309[ 0.267802] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
310[ 0.268127] ACPI: Enabled 6 GPEs in block 00 to 1F
311[ 0.268141] ACPI: \_SB_.PCI0: notify handler is installed
312[ 0.268190] Found 1 acpi root devices
313[ 0.268590] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
314[ 0.268608] vgaarb: loaded
315[ 0.268612] vgaarb: bridge control possible 0000:00:01.0
316[ 0.268728] PCI: Using ACPI for IRQ routing
317[ 0.268734] PCI: pci_cache_line_size set to 64 bytes
318[ 0.268829] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
319[ 0.268834] e820: reserve RAM buffer [mem 0xc715e000-0xc7ffffff]
320[ 0.268837] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
321[ 0.269036] NetLabel: Initializing
322[ 0.269040] NetLabel: domain hash size = 128
323[ 0.269042] NetLabel: protocols = UNLABELED CIPSOv4
324[ 0.269068] NetLabel: unlabeled traffic allowed by default
325[ 0.269116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
326[ 0.269125] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
327[ 0.271236] Switched to clocksource hpet
328[ 0.281919] pnp: PnP ACPI init
329[ 0.281958] ACPI: bus type PNP registered
330[ 0.282350] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
331[ 0.282409] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
332[ 0.282433] pnp 00:02: [dma 4]
333[ 0.282472] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
334[ 0.282551] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
335[ 0.282623] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
336[ 0.282696] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
337[ 0.282986] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
338[ 0.283056] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
339[ 0.283061] pnp: PnP ACPI: found 8 devices
340[ 0.283064] ACPI: bus type PNP unregistered
341[ 0.293517] pci 0000:00:06.0: PCI bridge to [bus 01]
342[ 0.293530] pci 0000:00:06.0: bridge window [io 0x1000-0x1fff]
343[ 0.293540] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
344[ 0.293549] pci 0000:00:14.4: PCI bridge to [bus 02]
345[ 0.293567] pci 0000:00:15.0: PCI bridge to [bus 03]
346[ 0.293573] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
347[ 0.293583] pci 0000:00:15.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
348[ 0.293595] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
349[ 0.293599] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
350[ 0.293604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
351[ 0.293608] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
352[ 0.293612] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
353[ 0.293616] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
354[ 0.293621] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
355[ 0.293625] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
356[ 0.293629] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
357[ 0.293633] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff]
358[ 0.293637] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
359[ 0.293641] pci_bus 0000:03: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
360[ 0.293707] NET: Registered protocol family 2
361[ 0.294064] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
362[ 0.294529] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
363[ 0.295240] TCP: Hash tables configured (established 65536 bind 65536)
364[ 0.295357] TCP: reno registered
365[ 0.295392] UDP hash table entries: 4096 (order: 5, 131072 bytes)
366[ 0.295508] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
367[ 0.295758] NET: Registered protocol family 1
368[ 0.295792] pci 0000:00:01.0: Boot video device
369[ 0.350212] PCI: CLS 64 bytes, default 64
370[ 0.350324] Unpacking initramfs...
371[ 0.458737] Freeing initrd memory: 2860K (ffff88007fd35000 - ffff880080000000)
372[ 0.458752] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
373[ 0.458757] software IO TLB [mem 0xc315e000-0xc715e000] (64MB) mapped at [ffff8800c315e000-ffff8800c715dfff]
374[ 0.459085] LVT offset 0 assigned for vector 0x400
375[ 0.459166] perf: AMD IBS detected (0x000000ff)
376[ 0.459222] Scanning for low memory corruption every 60 seconds
377[ 0.460002] audit: initializing netlink socket (disabled)
378[ 0.460030] type=2000 audit(1396062914.346:1): initialized
379[ 0.483948] HugeTLB registered 2 MB page size, pre-allocated 0 pages
380[ 0.487145] zbud: loaded
381[ 0.487678] VFS: Disk quotas dquot_6.5.2
382[ 0.487775] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
383[ 0.488218] msgmni has been set to 11125
384[ 0.488327] Key type big_key registered
385[ 0.488770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
386[ 0.488840] io scheduler noop registered
387[ 0.488845] io scheduler deadline registered
388[ 0.488900] io scheduler cfq registered (default)
389[ 0.489022] pcieport 0000:00:06.0: device [1022:1514] has invalid IRQ; check vendor BIOS
390[ 0.489319] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
391[ 0.489606] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
392[ 0.489754] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
393[ 0.489759] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
394[ 0.489766] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
395[ 0.489816] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
396[ 0.489820] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
397[ 0.489827] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
398[ 0.489852] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
399[ 0.489883] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
400[ 0.490044] GHES: Failed to enable APEI firmware first mode.
401[ 0.490172] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
402[ 0.510982] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
403[ 0.512008] Linux agpgart interface v0.103
404[ 0.512142] rtc_cmos 00:00: RTC can wake from S4
405[ 0.512396] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
406[ 0.512438] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
407[ 0.512656] drop_monitor: Initializing network drop monitor service
408[ 0.512747] TCP: cubic registered
409[ 0.512931] NET: Registered protocol family 10
410[ 0.513233] NET: Registered protocol family 17
411[ 0.513253] Key type dns_resolver registered
412[ 0.513907] registered taskstats version 1
413[ 0.515026] Magic number: 6:196:261
414[ 0.515141] rtc_cmos 00:00: setting system clock to 2014-03-29 03:15:14 UTC (1396062914)
415[ 0.515188] PM: Hibernation image not present or could not be loaded.
416[ 0.517541] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
417[ 0.517550] Write protecting the kernel read-only data: 8192k
418[ 0.522653] Freeing unused kernel memory: 860K (ffff880001529000 - ffff880001600000)
419[ 0.524910] Freeing unused kernel memory: 372K (ffff8800017a3000 - ffff880001800000)
420[ 0.543818] random: systemd-tmpfile urandom read with 2 bits of entropy available
421[ 0.547726] systemd-udevd[45]: starting version 211
422[ 0.587881] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
423[ 0.588678] serio: i8042 KBD port at 0x60,0x64 irq 1
424[ 0.588771] serio: i8042 AUX port at 0x60,0x64 irq 12
425[ 0.602172] ACPI: bus type USB registered
426[ 0.602228] usbcore: registered new interface driver usbfs
427[ 0.602249] usbcore: registered new interface driver hub
428[ 0.603011] SCSI subsystem initialized
429[ 0.603386] usbcore: registered new device driver usb
430[ 0.604332] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
431[ 0.604901] ehci-pci: EHCI PCI platform driver
432[ 0.605171] QUIRK: Enable AMD PLL fix
433[ 0.605215] ehci-pci 0000:00:12.2: EHCI Host Controller
434[ 0.605236] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
435[ 0.605248] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
436[ 0.605265] ehci-pci 0000:00:12.2: debug port 1
437[ 0.605339] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0248400
438[ 0.606333] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
439[ 0.606648] ohci-pci: OHCI PCI platform driver
440[ 0.609378] libata version 3.00 loaded.
441[ 0.614935] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
442[ 0.615605] hub 1-0:1.0: USB hub found
443[ 0.615626] hub 1-0:1.0: 5 ports detected
444[ 0.616188] ehci-pci 0000:00:13.2: EHCI Host Controller
445[ 0.616203] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
446[ 0.616212] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
447[ 0.616229] ehci-pci 0000:00:13.2: debug port 1
448[ 0.616290] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0248500
449[ 0.624852] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
450[ 0.625202] hub 2-0:1.0: USB hub found
451[ 0.625222] hub 2-0:1.0: 5 ports detected
452[ 0.626052] ehci-pci 0000:00:16.2: EHCI Host Controller
453[ 0.626069] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
454[ 0.626079] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
455[ 0.626095] ehci-pci 0000:00:16.2: debug port 1
456[ 0.626154] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0248600
457[ 0.634866] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
458[ 0.635225] hub 3-0:1.0: USB hub found
459[ 0.635244] hub 3-0:1.0: 4 ports detected
460[ 0.636050] ohci-pci 0000:00:12.0: OHCI PCI host controller
461[ 0.636067] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
462[ 0.636120] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0244000
463[ 0.675425] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
464[ 0.693016] hub 4-0:1.0: USB hub found
465[ 0.693042] hub 4-0:1.0: 5 ports detected
466[ 0.693330] ahci 0000:00:11.0: version 3.0
467[ 0.693743] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
468[ 0.693751] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
469[ 0.695509] scsi0 : ahci
470[ 0.695700] scsi1 : ahci
471[ 0.695821] scsi2 : ahci
472[ 0.695960] scsi3 : ahci
473[ 0.696081] scsi4 : ahci
474[ 0.696206] scsi5 : ahci
475[ 0.696298] ata1: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248100 irq 19
476[ 0.696304] ata2: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248180 irq 19
477[ 0.696308] ata3: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248200 irq 19
478[ 0.696312] ata4: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248280 irq 19
479[ 0.696317] ata5: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248300 irq 19
480[ 0.696321] ata6: SATA max UDMA/133 abar m1024@0xf0248000 port 0xf0248380 irq 19
481[ 0.696644] ohci-pci 0000:00:13.0: OHCI PCI host controller
482[ 0.696665] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
483[ 0.696701] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0245000
484[ 0.753033] hub 5-0:1.0: USB hub found
485[ 0.753059] hub 5-0:1.0: 5 ports detected
486[ 0.753580] ohci-pci 0000:00:14.5: OHCI PCI host controller
487[ 0.753594] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
488[ 0.753625] ohci-pci 0000:00:14.5: irq 18, io mem 0xf0246000
489[ 0.809761] hub 6-0:1.0: USB hub found
490[ 0.809788] hub 6-0:1.0: 2 ports detected
491[ 0.810211] ohci-pci 0000:00:16.0: OHCI PCI host controller
492[ 0.810224] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
493[ 0.810256] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0247000
494[ 0.866430] hub 7-0:1.0: USB hub found
495[ 0.866459] hub 7-0:1.0: 4 ports detected
496[ 1.015303] ata5: SATA link down (SStatus 0 SControl 300)
497[ 1.015384] ata4: SATA link down (SStatus 0 SControl 300)
498[ 1.015496] ata6: SATA link down (SStatus 0 SControl 300)
499[ 1.015711] ata2: SATA link down (SStatus 0 SControl 300)
500[ 1.015832] ata3: SATA link down (SStatus 0 SControl 300)
501[ 1.118734] usb 4-4: new low-speed USB device number 2 using ohci-pci
502[ 1.182073] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
503[ 1.194223] ata1.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
504[ 1.194232] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
505[ 1.200970] ata1.00: configured for UDMA/133
506[ 1.201546] scsi 0:0:0:0: Direct-Access ATA WDC WD30EZRX-00M 80.0 PQ: 0 ANSI: 5
507[ 1.207914] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
508[ 1.207924] sd 0:0:0:0: [sda] 4096-byte physical blocks
509[ 1.208039] sd 0:0:0:0: [sda] Write Protect is off
510[ 1.208044] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
511[ 1.208094] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
512[ 1.258877] sda: sda1 sda2
513[ 1.259701] sd 0:0:0:0: [sda] Attached SCSI disk
514[ 1.281542] hidraw: raw HID events driver (C) Jiri Kosina
515[ 1.286638] usbcore: registered new interface driver usbhid
516[ 1.286646] usbhid: USB HID core driver
517[ 1.288456] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input2
518[ 1.288595] hid-generic 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:12.0-4/input0
519[ 1.462238] tsc: Refined TSC clocksource calibration: 1650.000 MHz
520[ 1.508404] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
521[ 1.512428] XFS (sda2): Mounting Filesystem
522[ 1.656582] XFS (sda2): Starting recovery (logdev: internal)
523[ 1.869726] XFS (sda2): Ending recovery (logdev: internal)
524[ 2.399126] systemd[1]: systemd 211 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
525[ 2.399543] systemd[1]: Detected architecture 'x86-64'.
526[ 2.436590] systemd[1]: Set hostname to <whoknows>.
527[ 2.462853] Switched to clocksource tsc
528[ 2.804510] random: nonblocking pool is initialized
529[ 2.900408] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
530[ 2.901120] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
531[ 2.901262] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
532[ 2.901290] systemd[1]: Starting Remote File Systems.
533[ 2.901684] systemd[1]: Reached target Remote File Systems.
534[ 2.901742] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
535[ 2.902296] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
536[ 2.902321] systemd[1]: Starting Encrypted Volumes.
537[ 2.902639] systemd[1]: Reached target Encrypted Volumes.
538[ 2.902669] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
539[ 2.902736] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
540[ 2.902756] systemd[1]: Starting Paths.
541[ 2.903108] systemd[1]: Reached target Paths.
542[ 2.903128] systemd[1]: Starting Swap.
543[ 2.903427] systemd[1]: Reached target Swap.
544[ 2.903451] systemd[1]: Expecting device dev-sda1.device...
545[ 2.903675] systemd[1]: Starting Root Slice.
546[ 2.916603] systemd[1]: Created slice Root Slice.
547[ 2.916640] systemd[1]: Starting Delayed Shutdown Socket.
548[ 2.917037] systemd[1]: Listening on Delayed Shutdown Socket.
549[ 2.917061] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
550[ 2.917412] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
551[ 2.917434] systemd[1]: Starting Device-mapper event daemon FIFOs.
552[ 2.917788] systemd[1]: Listening on Device-mapper event daemon FIFOs.
553[ 2.917810] systemd[1]: Starting User and Session Slice.
554[ 2.918489] systemd[1]: Created slice User and Session Slice.
555[ 2.918524] systemd[1]: Starting udev Control Socket.
556[ 2.918876] systemd[1]: Listening on udev Control Socket.
557[ 2.918904] systemd[1]: Starting udev Kernel Socket.
558[ 2.919244] systemd[1]: Listening on udev Kernel Socket.
559[ 2.919266] systemd[1]: Starting LVM2 metadata daemon socket.
560[ 2.919635] systemd[1]: Listening on LVM2 metadata daemon socket.
561[ 2.919664] systemd[1]: Starting Journal Socket.
562[ 2.920056] systemd[1]: Listening on Journal Socket.
563[ 2.920100] systemd[1]: Starting System Slice.
564[ 2.920790] systemd[1]: Created slice System Slice.
565[ 2.920828] systemd[1]: Started File System Check on Root Device.
566[ 2.920847] systemd[1]: Starting system-systemd\x2dfsck.slice.
567[ 2.921503] systemd[1]: Created slice system-systemd\x2dfsck.slice.
568[ 2.921532] systemd[1]: Starting Remount Root and Kernel File Systems...
569[ 2.922989] systemd[1]: Mounting Huge Pages File System...
570[ 2.924728] systemd[1]: Mounting POSIX Message Queue File System...
571[ 2.996882] systemd[1]: Starting Create list of required static device nodes for the current kernel...
572[ 2.998327] systemd[1]: Starting udev Coldplug all Devices...
573[ 3.000711] systemd[1]: Started Load Kernel Modules.
574[ 3.000810] systemd[1]: Mounting Configuration File System...
575[ 3.002215] systemd[1]: Mounting Debug File System...
576[ 3.003731] systemd[1]: Starting Setup Virtual Console...
577[ 3.115475] systemd[1]: Starting Apply Kernel Variables...
578[ 3.116907] systemd[1]: Mounted FUSE Control File System.
579[ 3.117112] systemd[1]: Started Set Up Additional Binary Formats.
580[ 3.117150] systemd[1]: Starting system-getty.slice.
581[ 3.117995] systemd[1]: Created slice system-getty.slice.
582[ 3.118039] systemd[1]: Starting Journal Service...
583[ 3.119634] systemd[1]: Started Journal Service.
584[ 3.434182] systemd-udevd[138]: starting version 211
585[ 3.748103] ACPI: acpi_idle registered with cpuidle
586[ 3.775779] acpi-cpufreq: overriding BIOS provided _PSD data
587[ 3.802923] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
588[ 3.802946] ACPI: Power Button [PWRB]
589[ 3.803127] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
590[ 3.803138] ACPI: Power Button [PWRF]
591[ 3.974532] [drm] Initialized drm 1.1.0 20060810
592[ 3.980869] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
593[ 3.990213] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMB0 1 (20131115/utaddress-251)
594[ 3.990231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
595[ 4.136577] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
596[ 4.136738] sp5100_tco: PCI Revision ID: 0x42
597[ 4.136819] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
598[ 4.136836] sp5100_tco: Last reboot was not triggered by watchdog.
599[ 4.136974] sp5100_tco: initialized (0xffffc900022aeb00). heartbeat=60 sec (nowayout=0)
600[ 4.153424] mousedev: PS/2 mouse device common for all mice
601[ 4.191914] input: PC Speaker as /devices/platform/pcspkr/input/input5
602[ 4.333377] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
603[ 4.333765] r8169 0000:01:00.0: irq 42 for MSI/MSI-X
604[ 4.335503] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc9000233e000, 00:30:18:a4:38:37, XID 0c200000 IRQ 42
605[ 4.335515] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
606[ 4.335577] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
607[ 4.336009] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
608[ 4.336330] r8169 0000:03:00.0 eth1: RTL8168e/8111e at 0xffffc9000235c000, 00:30:18:a4:38:38, XID 0c200000 IRQ 43
609[ 4.336336] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
610[ 4.396667] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
611[ 4.396742] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
612[ 4.396804] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
613[ 4.396874] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
614[ 4.396938] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
615[ 4.397004] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
616[ 4.397071] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
617[ 4.397135] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
618[ 4.458783] microcode: CPU0: patch_level=0x05000101
619[ 4.610264] [drm] radeon kernel modesetting enabled.
620[ 4.611155] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1002:0x9806).
621[ 4.611200] [drm] register mmio base: 0xF0200000
622[ 4.611203] [drm] register mmio size: 262144
623[ 4.611290] ATOM BIOS: AMD
624[ 4.611364] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
625[ 4.611370] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
626[ 4.611373] [drm] Detected VRAM RAM=384M, BAR=256M
627[ 4.611376] [drm] RAM width 32bits DDR
628[ 4.611746] [TTM] Zone kernel: Available graphics memory: 2849258 kiB
629[ 4.611761] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
630[ 4.611767] [TTM] Initializing pool allocator
631[ 4.611801] [TTM] Initializing DMA pool allocator
632[ 4.611874] [drm] radeon: 384M of VRAM memory ready
633[ 4.611881] [drm] radeon: 1024M of GTT memory ready.
634[ 4.611948] [drm] Loading PALM Microcode
635[ 4.630584] microcode: CPU0: new patch_level=0x05000119
636[ 4.630731] microcode: CPU1: patch_level=0x05000101
637[ 4.636838] microcode: CPU1: new patch_level=0x05000119
638[ 4.637543] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
639[ 4.742391] [drm] GART: num cpu pages 262144, num gpu pages 262144
640[ 4.766117] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
641[ 4.766358] radeon 0000:00:01.0: WB enabled
642[ 4.766366] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800c0dd0c00
643[ 4.766371] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800c0dd0c0c
644[ 4.767232] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900037b2118
645[ 4.767237] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
646[ 4.767240] [drm] Driver supports precise vblank timestamp query.
647[ 4.767282] radeon 0000:00:01.0: irq 44 for MSI/MSI-X
648[ 4.767309] radeon 0000:00:01.0: radeon: using MSI.
649[ 4.767352] [drm] radeon: irq initialized.
650[ 4.784873] [drm] ring test on 0 succeeded in 1 usecs
651[ 4.784941] [drm] ring test on 3 succeeded in 1 usecs
652[ 4.811358] systemd-udevd[147]: renamed network interface eth0 to enp1s0
653[ 4.834410] systemd-udevd[149]: renamed network interface eth1 to enp3s0
654[ 4.843526] [drm] ring test on 5 succeeded in 1 usecs
655[ 4.843564] [drm] UVD initialized successfully.
656[ 4.844440] [drm] Enabling audio 0 support
657[ 4.844496] [drm] ib test on ring 0 succeeded in 0 usecs
658[ 4.844536] [drm] ib test on ring 3 succeeded in 0 usecs
659[ 4.865411] [drm] ib test on ring 5 succeeded
660[ 4.886269] [drm] Radeon Display Connectors
661[ 4.886274] [drm] Connector 0:
662[ 4.886277] [drm] DP-1
663[ 4.886279] [drm] HPD2
664[ 4.886284] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
665[ 4.886286] [drm] Encoders:
666[ 4.886289] [drm] DFP1: INTERNAL_UNIPHY
667[ 4.886292] [drm] Connector 1:
668[ 4.886294] [drm] VGA-1
669[ 4.886298] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
670[ 4.886299] [drm] Encoders:
671[ 4.886302] [drm] CRT1: INTERNAL_KLDSCP_DAC1
672[ 4.886349] [drm] Internal thermal controller without fan control
673[ 4.886408] [drm] Found smc ucode version: 0x00010601
674[ 4.886574] [drm] radeon: dpm initialized
675[ 4.929693] [drm] fb mappable at 0xE0477000
676[ 4.929702] [drm] vram apper at 0xE0000000
677[ 4.929705] [drm] size 8294400
678[ 4.929707] [drm] fb depth is 24
679[ 4.929710] [drm] pitch is 7680
680[ 4.930055] fbcon: radeondrmfb (fb0) is primary device
681[ 4.977375] Console: switching to colour frame buffer device 240x67
682[ 4.991311] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
683[ 4.991318] radeon 0000:00:01.0: registered panic notifier
684[ 4.991349] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
685[ 4.993107] kvm: Nested Virtualization enabled
686[ 4.993122] kvm: Nested Paging enabled
687[ 5.841132] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
688[ 5.844061] EXT4-fs (sda1): mounted filesystem without journal. Opts: stripe=4
689[ 5.927109] systemd-journald[123]: Received request to flush runtime journal from PID 1
690[ 6.102240] systemd-journald[123]: File /var/log/journal/68f4cce22daf4dcc9a7ebeb5d527d6d3/system.journal corrupted or uncleanly shut down, renaming and replacing.
691[ 822.990612] r8169 0000:03:00.0 enp3s0: link down
692[ 822.990638] r8169 0000:03:00.0 enp3s0: link down
693[ 822.990717] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
694[ 825.788108] r8169 0000:03:00.0 enp3s0: link up
695[ 825.788150] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
696[ 1400.756498] usb 1-5: new high-speed USB device number 3 using ehci-pci
697[ 1401.351242] usb-storage 1-5:1.0: USB Mass Storage device detected
698[ 1401.351530] usb-storage 1-5:1.0: Quirks match for vid 0bc2 pid 2300: 200000
699[ 1401.351617] scsi6 : usb-storage 1-5:1.0
700[ 1401.351887] usbcore: registered new interface driver usb-storage
701[ 1402.355994] scsi 6:0:0:0: Direct-Access Seagate Portable 0130 PQ: 0 ANSI: 4
702[ 1402.359707] sd 6:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
703[ 1402.360734] sd 6:0:0:0: [sdb] Write Protect is off
704[ 1402.360753] sd 6:0:0:0: [sdb] Mode Sense: 2f 08 00 00
705[ 1402.361853] sd 6:0:0:0: [sdb] No Caching mode page found
706[ 1402.361992] sd 6:0:0:0: [sdb] Assuming drive cache: write back
707[ 1402.367484] sd 6:0:0:0: [sdb] No Caching mode page found
708[ 1402.367622] sd 6:0:0:0: [sdb] Assuming drive cache: write back
709[ 1402.438731] sdb: sdb1
710[ 1402.443135] sd 6:0:0:0: [sdb] No Caching mode page found
711[ 1402.443275] sd 6:0:0:0: [sdb] Assuming drive cache: write back
712[ 1402.443289] sd 6:0:0:0: [sdb] Attached SCSI disk
713[ 1408.823240] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
714[ 1432.401222] usb 1-5: USB disconnect, device number 3
715[ 1432.406174] sd 6:0:0:0: [sdb] Synchronizing SCSI cache
716[ 1432.406327] sd 6:0:0:0: [sdb]
717[ 1432.406336] Result: hostbyte=0x01 driverbyte=0x00