Gitiles
Code Review Sign In
review.coreboot.org / board-status / 8e503366355968b7b9b69924f5be954f6dcf2622 / . / asus / kfsn4-dre / 4.1-466-g4460703 / 2015-09-07T15:54:50Z / kernel_log.txt
blob: 3c24d26f45f3847c8d2b309b54c04f16252734a3 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standfcfe3932015-09-07 16:53:12 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-466-g4460703-dirty 09/07/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
63[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
91[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
93[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
95[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
96[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
97[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
98[ 0.000000] Zone ranges:
99[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
100[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
101[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
102[ 0.000000] Movable zone start for each node
103[ 0.000000] Early memory node ranges
104[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
105[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
106[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
107[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
108[ 0.000000] On node 0 totalpages: 1048377
109[ 0.000000] DMA zone: 56 pages used for memmap
110[ 0.000000] DMA zone: 21 pages reserved
111[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
112[ 0.000000] DMA32 zone: 10695 pages used for memmap
113[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
114[ 0.000000] Normal zone: 3584 pages used for memmap
115[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
116[ 0.000000] On node 1 totalpages: 262144
117[ 0.000000] Normal zone: 3584 pages used for memmap
118[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
119[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
120[ 0.000000] ACPI: Local APIC address 0xfee00000
121[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
137[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
138[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
139[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
142[ 0.000000] ACPI: IRQ9 used by override.
143[ 0.000000] ACPI: IRQ14 used by override.
144[ 0.000000] ACPI: IRQ15 used by override.
145[ 0.000000] Using ACPI (MADT) for SMP configuration information
146[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
147[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
148[ 0.000000] nr_irqs_gsi: 40
149[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
150[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
152[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
154[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
155[ 0.000000] Booting paravirtualized kernel on bare hardware
156[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
157[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
158[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
159[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
160[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
161[ 0.000000] Policy zone: Normal
162[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
173[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.806 MHz processor
187[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.61 BogoMIPS (lpj=7639224)
188[ 0.010962] pid_max: default: 32768 minimum: 301
189[ 0.015684] ACPI: Core revision 20140424
190[ 0.022115] ACPI: All ACPI Tables successfully acquired
191[ 0.027635] Security Framework initialized
192[ 0.031814] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037724] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045540] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058863] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068745] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075769] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083727] Initializing cgroup subsys memory
199[ 0.088192] Initializing cgroup subsys devices
200[ 0.092735] Initializing cgroup subsys freezer
201[ 0.097260] Initializing cgroup subsys net_cls
202[ 0.101795] Initializing cgroup subsys blkio
203[ 0.106151] Initializing cgroup subsys perf_event
204[ 0.110947] Initializing cgroup subsys net_prio
205[ 0.115605] tseg: 0000000000
206[ 0.115619] CPU: Physical Processor ID: 0
207[ 0.119739] CPU: Processor Core ID: 0
208[ 0.124552] mce: CPU supports 6 MCE banks
209[ 0.128669] LVT offset 0 assigned for vector 0xf9
210[ 0.133471] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148949] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158086] ftrace: allocating 21601 entries in 85 pages
215[ 0.173552] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219200] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336304] Performance Events: AMD PMU driver.
218[ 0.341026] ... version: 0
219[ 0.345119] ... bit width: 48
220[ 0.349305] ... generic registers: 4
221[ 0.353392] ... value mask: 0000ffffffffffff
222[ 0.358804] ... max period: 00007fffffffffff
223[ 0.364209] ... fixed-purpose events: 0
224[ 0.368312] ... event mask: 000000000000000f
225[ 0.376343] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384654] x86: Booting SMP configuration:
227[ 0.388925] .... node #0, CPUs: #1 #2 #3
228[ 0.433495] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585047] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589484] smpboot: Total of 8 processors activated (30557.67 BogoMIPS)
231[ 0.602090] devtmpfs: initialized
232[ 0.614089] pinctrl core: initialized pinctrl subsystem
233[ 0.619564] NET: Registered protocol family 16
234[ 0.624305] cpuidle: using governor ladder
235[ 0.628479] cpuidle: using governor menu
236[ 0.632485] node 0 link 1: io port [1000, 3fff]
237[ 0.632488] TOM: 00000000c0000000 aka 3072M
238[ 0.636751] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
239[ 0.636755] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636759] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636761] TOM2: 0000000180000000 aka 6144M
242[ 0.641107] bus: [bus 00-05] on node 0 link 1
243[ 0.641109] bus: 00 [io 0x0000-0xffff]
244[ 0.641111] bus: 00 [mem 0xd0000000-0xffffffff]
245[ 0.641113] bus: 00 [mem 0x180000000-0xfcffffffff]
246[ 0.641219] ACPI: bus type PCI registered
247[ 0.645312] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.651985] PCI: Using configuration type 1 for base access
249[ 0.657623] PCI: Using configuration type 1 for extended access
250[ 0.664246] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670614] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676440] mtrr: corrected configuration.
253[ 0.693191] ACPI: Added _OSI(Module Device)
254[ 0.697491] ACPI: Added _OSI(Processor Device)
255[ 0.702013] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706797] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715888] ACPI: Interpreter enabled
258[ 0.719651] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.729097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738544] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.747991] ACPI: (supports S0 S1 S5)
262[ 0.751723] ACPI: Using IOAPIC for interrupt routing
263[ 0.756806] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.785558] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.791816] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.800130] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.839622] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.849743] PCI host bridge to bus 0000:00
269[ 0.853942] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.859529] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.865798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
272[ 0.872768] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
273[ 0.879730] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
274[ 0.886701] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
275[ 0.892977] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
276[ 0.893165] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
277[ 0.893173] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
278[ 0.893309] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
279[ 0.893317] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
280[ 0.893343] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
281[ 0.893354] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
282[ 0.893388] pci 0000:00:01.1: PME# supported from D3hot D3cold
283[ 0.893486] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
284[ 0.893501] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
285[ 0.893537] pci 0000:00:02.0: supports D1 D2
286[ 0.893539] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
287[ 0.893589] pci 0000:00:02.0: System wakeup disabled by ACPI
288[ 0.899386] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
289[ 0.899401] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
290[ 0.899445] pci 0000:00:02.1: supports D1 D2
291[ 0.899463] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
292[ 0.899525] pci 0000:00:02.1: System wakeup disabled by ACPI
293[ 0.905346] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
294[ 0.905372] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
295[ 0.905416] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
296[ 0.912643] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
297[ 0.919266] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
298[ 0.926487] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
299[ 0.933207] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
300[ 0.933215] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
301[ 0.933222] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
302[ 0.933227] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
303[ 0.933231] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
304[ 0.933236] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
305[ 0.933241] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
306[ 0.933392] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
307[ 0.933409] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
308[ 0.933424] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
309[ 0.933436] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
310[ 0.933448] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
311[ 0.933464] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
312[ 0.933477] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
313[ 0.933616] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
314[ 0.933759] pci 0000:00:09.0: System wakeup disabled by ACPI
315[ 0.939554] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
316[ 0.939604] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
317[ 0.939653] pci 0000:00:0b.0: System wakeup disabled by ACPI
318[ 0.945468] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
319[ 0.945514] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
320[ 0.945573] pci 0000:00:0c.0: System wakeup disabled by ACPI
321[ 0.951377] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
322[ 0.951417] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
323[ 0.951476] pci 0000:00:0d.0: System wakeup disabled by ACPI
324[ 0.957285] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
325[ 0.957327] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
326[ 0.957406] pci 0000:00:0e.0: System wakeup disabled by ACPI
327[ 0.963242] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
328[ 0.963369] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
329[ 0.963483] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
330[ 0.963605] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
331[ 0.963766] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
332[ 0.963873] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
333[ 0.964025] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
334[ 0.964128] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
335[ 0.964246] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
336[ 0.964384] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
337[ 0.964556] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
338[ 0.964581] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
339[ 0.964599] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
340[ 0.964623] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
341[ 0.964676] pci 0000:01:04.0: supports D1 D2
342[ 0.964766] pci 0000:00:09.0: PCI bridge to [bus 01]
343[ 0.969819] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
344[ 0.969822] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
345[ 0.969826] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
346[ 0.969942] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
347[ 0.969977] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
348[ 0.970011] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
349[ 0.970110] pci 0000:02:00.0: PME# supported from D3hot D3cold
350[ 0.970190] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
351[ 0.980300] pci 0000:00:0b.0: PCI bridge to [bus 02]
352[ 0.985360] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
353[ 0.985464] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
354[ 0.985497] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
355[ 0.985601] pci 0000:03:00.0: PME# supported from D3hot D3cold
356[ 0.985699] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
357[ 0.995828] pci 0000:00:0c.0: PCI bridge to [bus 03]
358[ 1.000874] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
359[ 1.000948] pci 0000:00:0d.0: PCI bridge to [bus 04]
360[ 1.006070] pci 0000:00:0e.0: PCI bridge to [bus 05]
361[ 1.011149] pci_bus 0000:00: on NUMA node 0
362[ 1.011254] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
363[ 1.017686] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
364[ 1.024097] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
365[ 1.031753] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
366[ 1.039415] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
367[ 1.047058] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
368[ 1.054722] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
369[ 1.061142] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
370[ 1.067564] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.075200] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
372[ 1.082863] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
373[ 1.090510] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
374[ 1.096910] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
375[ 1.103353] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
376[ 1.110998] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
377[ 1.118668] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
378[ 1.126313] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
379[ 1.135407] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
380[ 1.142141] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
381[ 1.148878] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
382[ 1.155599] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
383[ 1.162588] ACPI: Enabled 1 GPEs in block 00 to 1F
384[ 1.167864] vgaarb: setting as boot device: PCI:0000:01:04.0
385[ 1.173644] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
386[ 1.181846] vgaarb: loaded
387[ 1.184647] vgaarb: bridge control possible 0000:01:04.0
388[ 1.190206] PCI: Using ACPI for IRQ routing
389[ 1.194483] PCI: pci_cache_line_size set to 64 bytes
390[ 1.194541] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
391[ 1.194544] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
392[ 1.194858] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
393[ 1.201988] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
394[ 1.207263] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
395[ 1.216003] Switched to clocksource hpet
396[ 1.231553] pnp: PnP ACPI init
397[ 1.234768] ACPI: bus type PNP registered
398[ 1.239403] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
399[ 1.239483] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
400[ 1.239581] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.239659] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
402[ 1.239700] pnp 00:04: [dma 2]
403[ 1.239742] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
404[ 1.239764] pnp: PnP ACPI: found 5 devices
405[ 1.243955] ACPI: bus type PNP unregistered
406[ 1.256040] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
407[ 1.266101] pci 0000:00:09.0: PCI bridge to [bus 01]
408[ 1.271173] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
409[ 1.277343] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
410[ 1.284215] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
411[ 1.291549] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
412[ 1.298910] pci 0000:00:0b.0: PCI bridge to [bus 02]
413[ 1.303953] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
414[ 1.310829] pci 0000:00:0c.0: PCI bridge to [bus 03]
415[ 1.315873] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
416[ 1.322751] pci 0000:00:0d.0: PCI bridge to [bus 04]
417[ 1.327789] pci 0000:00:0e.0: PCI bridge to [bus 05]
418[ 1.332841] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
419[ 1.332844] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
420[ 1.332848] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
421[ 1.332850] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
422[ 1.332853] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
423[ 1.332856] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
424[ 1.332858] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
425[ 1.332861] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
426[ 1.332864] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
427[ 1.332866] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
428[ 1.333005] NET: Registered protocol family 2
429[ 1.337972] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
430[ 1.345771] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
431[ 1.353190] TCP: Hash tables configured (established 65536 bind 65536)
432[ 1.359884] TCP: reno registered
433[ 1.363201] UDP hash table entries: 4096 (order: 5, 131072 bytes)
434[ 1.369477] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
435[ 1.376348] NET: Registered protocol family 1
436[ 1.381186] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
437[ 1.387350] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
438[ 1.393355] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.398967] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.404570] pci 0000:00:0b.0: Found disabled HT MSI Mapping
441[ 1.410233] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.415838] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.421427] pci 0000:00:0c.0: Found disabled HT MSI Mapping
444[ 1.427089] pci 0000:00:00.0: Found enabled HT MSI Mapping
445[ 1.432693] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.438276] pci 0000:00:0d.0: Found disabled HT MSI Mapping
447[ 1.443934] pci 0000:00:00.0: Found enabled HT MSI Mapping
448[ 1.449537] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.455128] pci 0000:00:0e.0: Found disabled HT MSI Mapping
450[ 1.460792] pci 0000:00:00.0: Found enabled HT MSI Mapping
451[ 1.466393] pci 0000:01:04.0: Video device with shadowed ROM
452[ 1.466401] PCI: CLS 64 bytes, default 64
453[ 1.466509] Unpacking initramfs...
454[ 1.699390] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
455[ 1.707340] PCI-DMA: Disabling AGP.
456[ 1.712549] PCI-DMA: aperture base @ b4000000 size 65536 KB
457[ 1.718239] PCI-DMA: using GART IOMMU.
458[ 1.722062] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
459[ 1.734157] platform rtc_cmos: registered platform RTC device (no PNP device found)
460[ 1.742506] microcode: CPU0: patch_level=0x01000096
461[ 1.747509] microcode: CPU1: patch_level=0x01000096
462[ 1.752526] microcode: CPU2: patch_level=0x01000096
463[ 1.757539] microcode: CPU3: patch_level=0x01000096
464[ 1.762547] microcode: CPU4: patch_level=0x01000096
465[ 1.767546] microcode: CPU5: patch_level=0x01000096
466[ 1.773629] microcode: CPU6: patch_level=0x01000096
467[ 1.778617] microcode: CPU7: patch_level=0x01000096
468[ 1.783697] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
469[ 1.792643] LVT offset 1 assigned for vector 0x400
470[ 1.797553] IBS: LVT offset 1 assigned
471[ 1.801419] perf: AMD IBS detected (0x00000007)
472[ 1.806648] futex hash table entries: 2048 (order: 5, 131072 bytes)
473[ 1.813134] audit: initializing netlink subsys (disabled)
474[ 1.818646] audit: type=2000 audit(1441644206.636:1): initialized
475[ 1.825597] HugeTLB registered 2 MB page size, pre-allocated 0 pages
476[ 1.832096] zbud: loaded
477[ 1.835066] VFS: Disk quotas dquot_6.5.2
478[ 1.839131] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
479[ 1.845772] msgmni has been set to 9945
480[ 1.850211] alg: No test for stdrng (krng)
481[ 1.854500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
482[ 1.862139] io scheduler noop registered
483[ 1.866152] io scheduler deadline registered
484[ 1.870580] io scheduler cfq registered (default)
485[ 1.875581] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
486[ 1.875707] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
487[ 1.875841] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
488[ 1.875954] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
489[ 1.876116] aer 0000:00:0b.0:pcie02: service driver aer loaded
490[ 1.876144] aer 0000:00:0c.0:pcie02: service driver aer loaded
491[ 1.876170] aer 0000:00:0d.0:pcie02: service driver aer loaded
492[ 1.876195] aer 0000:00:0e.0:pcie02: service driver aer loaded
493[ 1.876215] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
494[ 1.883308] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
495[ 1.889914] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
496[ 1.889924] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
497[ 1.896968] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
498[ 1.903578] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
499[ 1.903588] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
500[ 1.910630] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
501[ 1.910640] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
502[ 1.917693] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
503[ 1.917722] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
504[ 1.923411] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
505[ 1.930236] GHES: HEST is not enabled!
506[ 1.934201] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
507[ 1.960983] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
508[ 1.988783] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
509[ 1.996804] Linux agpgart interface v0.103
510[ 2.001212] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
511[ 2.011673] serio: i8042 KBD port at 0x60,0x64 irq 1
512[ 2.016826] serio: i8042 AUX port at 0x60,0x64 irq 12
513[ 2.022191] mousedev: PS/2 mouse device common for all mice
514[ 2.027986] rtc_cmos rtc_cmos: RTC can wake from S4
515[ 2.033194] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
516[ 2.039693] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
517[ 2.047664] ledtrig-cpu: registered to indicate activity on CPUs
518[ 2.053977] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
519[ 2.060519] AMD IOMMUv2 functionality not available on this system
520[ 2.066931] TCP: cubic registered
521[ 2.070479] NET: Registered protocol family 10
522[ 2.075445] mip6: Mobile IPv6
523[ 2.076963] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
524[ 2.087250] NET: Registered protocol family 17
525[ 2.091790] mpls_gso: MPLS GSO support
526[ 2.096485] registered taskstats version 1
527[ 2.101420] rtc_cmos rtc_cmos: setting system clock to 2015-09-07 16:43:28 UTC (1441644208)
528[ 2.110011] PM: Hibernation image not present or could not be loaded.
529[ 2.111841] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
530[ 2.119811] Write protecting the kernel read-only data: 8192k
531[ 2.129104] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
532[ 2.137845] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
533[ 2.161800] systemd-udevd[98]: starting version 215
534[ 2.167643] random: systemd-udevd urandom read with 3 bits of entropy available
535[ 2.198986] pps_core: LinuxPPS API ver. 1 registered
536[ 2.204101] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
537[ 2.213757] ACPI: bus type USB registered
538[ 2.218066] usbcore: registered new interface driver usbfs
539[ 2.218111] PTP clock support registered
540[ 2.227756] usbcore: registered new interface driver hub
541[ 2.233417] usbcore: registered new device driver usb
542[ 2.233567] tg3.c:v3.137 (May 11, 2014)
543[ 2.233582] tg3 0000:02:00.0: enabling device (0004 -> 0006)
544[ 2.233793] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
545[ 2.255045] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
546[ 2.262257] ehci-pci: EHCI PCI platform driver
547[ 2.267062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
548[ 2.267143] ehci-pci 0000:00:02.1: EHCI Host Controller
549[ 2.267160] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
550[ 2.267181] ehci-pci 0000:00:02.1: debug port 1
551[ 2.267225] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
552[ 2.267253] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
553[ 2.275678] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
554[ 2.275747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
555[ 2.275749] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
556[ 2.275751] usb usb1: Product: EHCI Host Controller
557[ 2.275752] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
558[ 2.275753] usb usb1: SerialNumber: 0000:00:02.1
559[ 2.276047] hub 1-0:1.0: USB hub found
560[ 2.276058] hub 1-0:1.0: 10 ports detected
561[ 2.341092] ohci-pci: OHCI PCI platform driver
562[ 2.346124] ohci-pci 0000:00:02.0: OHCI PCI host controller
563[ 2.351922] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
564[ 2.359728] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
565[ 2.372146] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
566[ 2.382529] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
567[ 2.392420] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
568[ 2.400373] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
569[ 2.407293] tg3 0000:03:00.0: enabling device (0004 -> 0006)
570[ 2.413184] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
571[ 2.421787] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
572[ 2.428731] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
573[ 2.436080] usb usb2: Product: OHCI PCI host controller
574[ 2.441388] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
575[ 2.447560] usb usb2: SerialNumber: 0000:00:02.0
576[ 2.452535] hub 2-0:1.0: USB hub found
577[ 2.456411] hub 2-0:1.0: 10 ports detected
578[ 2.476011] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
579[ 2.486436] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
580[ 2.496303] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
581[ 2.504259] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
582[ 2.517495] FS-Cache: Loaded
583[ 2.524710] RPC: Registered named UNIX socket transport module.
584[ 2.531327] RPC: Registered udp transport module.
585[ 2.537363] RPC: Registered tcp transport module.
586[ 2.543520] RPC: Registered tcp NFSv4.1 backchannel transport module.
587[ 2.555983] FS-Cache: Netfs 'nfs' registered for caching
588[ 2.569815] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
589[ 2.615648] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
590[ 2.731502] tsc: Refined TSC clocksource calibration: 1909.786 MHz
591[ 3.735250] Switched to clocksource tsc
592[ 4.209180] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
593[ 4.215831] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
594[ 4.222797] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
595[ 12.647371] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
596[ 12.661242] systemd[1]: Detected architecture 'x86-64'.
597[ 13.840140] random: nonblocking pool is initialized
598[ 14.107453] systemd[1]: Inserted module 'autofs4'
599[ 14.117329] systemd[1]: Set hostname to <cb-test-tgt>.
600[ 18.629235] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
601[ 18.642127] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
602[ 18.657693] systemd[1]: Expecting device dev-ttyS0.device...
603[ 18.674029] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
604[ 18.681876] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
605[ 18.689591] systemd[1]: Starting Remote File Systems (Pre).
606[ 18.706088] systemd[1]: Reached target Remote File Systems (Pre).
607[ 18.712392] systemd[1]: Starting Encrypted Volumes.
608[ 18.726082] systemd[1]: Reached target Encrypted Volumes.
609[ 18.731681] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
610[ 18.739881] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
611[ 18.747925] systemd[1]: Starting Paths.
612[ 18.761987] systemd[1]: Reached target Paths.
613[ 18.766498] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
614[ 18.789981] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
615[ 18.799554] systemd[1]: Starting Swap.
616[ 18.813967] systemd[1]: Reached target Swap.
617[ 18.818359] systemd[1]: Starting Root Slice.
618[ 18.829959] systemd[1]: Created slice Root Slice.
619[ 18.834803] systemd[1]: Starting User and Session Slice.
620[ 18.849956] systemd[1]: Created slice User and Session Slice.
621[ 18.855834] systemd[1]: Starting Delayed Shutdown Socket.
622[ 18.869952] systemd[1]: Listening on Delayed Shutdown Socket.
623[ 18.875846] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
624[ 18.893933] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
625[ 18.901038] systemd[1]: Starting Journal Socket (/dev/log).
626[ 18.917945] systemd[1]: Listening on Journal Socket (/dev/log).
627[ 18.924002] systemd[1]: Starting udev Kernel Socket.
628[ 18.941925] systemd[1]: Listening on udev Kernel Socket.
629[ 18.947402] systemd[1]: Starting udev Control Socket.
630[ 18.961911] systemd[1]: Listening on udev Control Socket.
631[ 18.967437] systemd[1]: Starting Journal Socket.
632[ 18.981913] systemd[1]: Listening on Journal Socket.
633[ 18.987056] systemd[1]: Starting System Slice.
634[ 19.001906] systemd[1]: Created slice System Slice.
635[ 19.006935] systemd[1]: Starting system-getty.slice.
636[ 19.021897] systemd[1]: Created slice system-getty.slice.
637[ 19.027434] systemd[1]: Starting system-serial\x2dgetty.slice.
638[ 19.041891] systemd[1]: Created slice system-serial\x2dgetty.slice.
639[ 19.048327] systemd[1]: Starting Increase datagram queue length...
640[ 19.067087] systemd[1]: Mounting Debug File System...
641[ 19.082814] systemd[1]: Mounting POSIX Message Queue File System...
642[ 19.273860] systemd[1]: Starting Load Kernel Modules...
643[ 20.826638] systemd[1]: Started Set Up Additional Binary Formats.
644[ 21.426981] systemd[1]: Starting Create list of required static device nodes for the current kernel...
645[ 21.450688] systemd[1]: Starting udev Coldplug all Devices...
646[ 21.466455] systemd[1]: Mounting Huge Pages File System...
647[ 21.482082] systemd[1]: Starting Slices.
648[ 21.497132] systemd[1]: Reached target Slices.
649[ 21.502114] systemd[1]: Starting Remount Root and Kernel File Systems...
650[ 21.533075] systemd[1]: Started Increase datagram queue length.
651[ 21.540038] systemd[1]: Starting Syslog Socket.
652[ 21.553037] systemd[1]: Listening on Syslog Socket.
653[ 21.558119] systemd[1]: Starting Sockets.
654[ 21.573078] systemd[1]: Reached target Sockets.
655[ 21.577787] systemd[1]: Starting Journal Service...
656[ 21.605072] systemd[1]: Started Journal Service.
657[ 25.457378] systemd-udevd[190]: starting version 215
658[ 25.488923] systemd-journald[171]: Received request to flush runtime journal from PID 1
659[ 35.151748] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
660[ 35.159735] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
661[ 35.839366] EDAC MC: Ver: 3.0.0
662[ 35.953698] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
663[ 36.081952] MCE: In-kernel MCE decoding enabled.
664[ 36.299911] FDC 0 is a post-1991 82077
665[ 36.332326] AMD64 EDAC driver v3.4.0
666[ 36.336119] EDAC amd64: DRAM ECC enabled.
667[ 36.340222] EDAC amd64: F10h detected (node 0).
668[ 36.344861] EDAC MC: DCT0 chip selects:
669[ 36.344863] EDAC amd64: MC: 0: 0MB 1: 0MB
670[ 36.349655] EDAC amd64: MC: 2: 0MB 3: 0MB
671[ 36.354453] EDAC amd64: MC: 4: 0MB 5: 0MB
672[ 36.359280] EDAC amd64: MC: 6: 1024MB 7: 1024MB
673[ 36.364135] EDAC MC: DCT1 chip selects:
674[ 36.364137] EDAC amd64: MC: 0: 0MB 1: 0MB
675[ 36.368978] EDAC amd64: MC: 2: 0MB 3: 0MB
676[ 36.373830] EDAC amd64: MC: 4: 0MB 5: 0MB
677[ 36.378662] EDAC amd64: MC: 6: 1024MB 7: 1024MB
678[ 36.383493] EDAC amd64: using x4 syndromes.
679[ 36.387770] EDAC amd64: MCT channel count: 2
680[ 36.392174] EDAC amd64: CS6: Registered DDR2 RAM
681[ 36.396881] EDAC amd64: CS7: Registered DDR2 RAM
682[ 36.401862] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
683[ 36.411716] EDAC amd64: DRAM ECC enabled.
684[ 36.415874] EDAC amd64: F10h detected (node 1).
685[ 36.420539] EDAC MC: DCT0 chip selects:
686[ 36.420542] EDAC amd64: MC: 0: 1024MB 1: 0MB
687[ 36.425344] EDAC amd64: MC: 2: 0MB 3: 0MB
688[ 36.430139] EDAC amd64: MC: 4: 0MB 5: 0MB
689[ 36.434935] EDAC amd64: MC: 6: 0MB 7: 0MB
690[ 36.439731] EDAC MC: DCT1 chip selects:
691[ 36.439733] EDAC amd64: MC: 0: 0MB 1: 0MB
692[ 36.444522] EDAC amd64: MC: 2: 0MB 3: 0MB
693[ 36.449313] EDAC amd64: MC: 4: 0MB 5: 0MB
694[ 36.454103] EDAC amd64: MC: 6: 0MB 7: 0MB
695[ 36.458886] EDAC amd64: using x4 syndromes.
696[ 36.463139] EDAC amd64: MCT channel count: 1
697[ 36.467526] EDAC amd64: CS0: Registered DDR2 RAM
698[ 36.472424] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
699[ 36.482261] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
700[ 36.681886] SCSI subsystem initialized
701[ 36.813077] acpi-cpufreq: overriding BIOS provided _PSD data
702[ 37.148134] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
703[ 37.153445] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
704[ 37.233455] libata version 3.00 loaded.
705[ 37.510270] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
706[ 37.519148] ACPI: Power Button [PWRB]
707[ 37.519260] input: PC Speaker as /devices/platform/pcspkr/input/input4
708[ 37.529832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
709[ 37.537522] ACPI: Power Button [PWRF]
710[ 37.558811] sata_nv 0000:00:07.0: version 3.5
711[ 37.559194] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
712[ 37.565939] scsi0 : sata_nv
713[ 37.569140] scsi1 : sata_nv
714[ 37.572142] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
715[ 37.579405] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
716[ 37.586954] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
717[ 37.593309] scsi2 : sata_nv
718[ 37.596637] scsi3 : sata_nv
719[ 37.600060] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
720[ 37.607423] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
721[ 37.614737] pata_amd 0000:00:06.0: version 0.4.1
722[ 37.615631] scsi4 : pata_amd
723[ 37.618850] scsi5 : pata_amd
724[ 37.621922] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
725[ 37.628983] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
726[ 37.895336] ata1: SATA link down (SStatus 0 SControl 300)
727[ 37.923331] ata3: SATA link down (SStatus 0 SControl 300)
728[ 38.211213] ata2: SATA link down (SStatus 0 SControl 300)
729[ 38.409575] kvm: Nested Virtualization enabled
730[ 38.414170] kvm: Nested Paging enabled
731[ 38.527121] ata4: SATA link down (SStatus 0 SControl 300)
732[ 75.563979] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
733[ 300.722424] [Hardware Error]: Corrected error, no action required.
734[ 300.728735] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[-|CE|MiscV|-|AddrV|CECC]: 0x9c224100da080a13
735[ 300.738130] [Hardware Error]: MC4_ADDR: 0x00000000bd0e3000
736[ 300.743688] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
737[ 300.751611] EDAC MC1: 1 CE Failed to map error addr to a csrow on mc#1csrow#0channel#0 (channel:0 page:0xbd0e3 offset:0x0 grain:0 syndrome:0xda44)
738[ 300.764802] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
739[ 407.856368] nfs: server 10.100.1.1 not responding, still trying
740[ 407.888312] nfs: server 10.100.1.1 OK