Gitiles
Code Review Sign In
review.coreboot.org / board-status / 8e503366355968b7b9b69924f5be954f6dcf2622 / . / asus / kfsn4-dre / 4.0-8552-g1053f65 / 2015-03-26T22:43:42Z / kernel_log.txt
blob: be7261836c9660893392b7fbd33a2aadcf8890ef [file] [log] [blame]
Raptor Engineering Automated Test Standc8aeb222015-03-27 01:12:48 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] e820: BIOS-provided physical RAM map:
6[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
7[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
10[ 0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
11[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
12[ 0.000000] NX (Execute Disable) protection: active
13[ 0.000000] SMBIOS 2.7 present.
14[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8552-g1053f65-dirty 03/26/2015
15[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
16[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
17[ 0.000000] AGP: No AGP bridge found
18[ 0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
19[ 0.000000] MTRR default type: uncachable
20[ 0.000000] MTRR fixed ranges enabled:
21[ 0.000000] 00000-9FFFF write-back
22[ 0.000000] A0000-BFFFF uncachable
23[ 0.000000] C0000-FFFFF write-back
24[ 0.000000] MTRR variable ranges enabled:
25[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
26[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
27[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
28[ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 4 disabled
30[ 0.000000] 5 disabled
31[ 0.000000] 6 disabled
32[ 0.000000] 7 disabled
33[ 0.000000] TOM2: 0000000160000000 aka 5632M
34[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
35[ 0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
36[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
37[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
38[ 0.000000] Using GB pages for direct mapping
39[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
40[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
41[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
45[ 0.000000] [mem 0x15fe00000-0x15fffffff] page 2M
46[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
48[ 0.000000] [mem 0x15c000000-0x15fdfffff] page 2M
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
50[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
51[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
53[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
54[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
55[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
56[ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M
57[ 0.000000] [mem 0xdfe00000-0xdffaafff] page 4k
58[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
59[ 0.000000] ACPI: Early table checksum verification disabled
60[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
61[ 0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
64[ 0.000000] ACPI: FACS 0x00000000DFFB4210 000040
65[ 0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
66[ 0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
84[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
85[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
86[ 0.000000] NUMA: Initialized distance table, cnt=3
87[ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
88[ 0.000000] Scanning NUMA topology in Northbridge 24
89[ 0.000000] Number of physical nodes 2
90[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
91[ 0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
92[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
93[ 0.000000] NODE_DATA [mem 0x11fffb000-0x11fffffff]
94[ 0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
95[ 0.000000] NODE_DATA [mem 0x15fff9000-0x15fffdfff]
96[ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
97[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
98[ 0.000000] [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
99[ 0.000000] Zone ranges:
100[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
101[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
102[ 0.000000] Normal [mem 0x100000000-0x15fffffff]
103[ 0.000000] Movable zone start for each node
104[ 0.000000] Early memory node ranges
105[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
106[ 0.000000] node 0: [mem 0x00100000-0xdffaafff]
107[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
108[ 0.000000] node 1: [mem 0x120000000-0x15fffffff]
109[ 0.000000] On node 0 totalpages: 1048393
110[ 0.000000] DMA zone: 56 pages used for memmap
111[ 0.000000] DMA zone: 21 pages reserved
112[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
113[ 0.000000] DMA32 zone: 12487 pages used for memmap
114[ 0.000000] DMA32 zone: 913323 pages, LIFO batch:31
115[ 0.000000] Normal zone: 1792 pages used for memmap
116[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
117[ 0.000000] On node 1 totalpages: 262144
118[ 0.000000] Normal zone: 3584 pages used for memmap
119[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
120[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
121[ 0.000000] ACPI: Local APIC address 0xfee00000
122[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
129[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
137[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
138[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
139[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
140[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
141[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
142[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
143[ 0.000000] ACPI: IRQ9 used by override.
144[ 0.000000] ACPI: IRQ14 used by override.
145[ 0.000000] ACPI: IRQ15 used by override.
146[ 0.000000] Using ACPI (MADT) for SMP configuration information
147[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
148[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
149[ 0.000000] nr_irqs_gsi: 40
150[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
151[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
152[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
154[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
155[ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
156[ 0.000000] Booting paravirtualized kernel on bare hardware
157[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
158[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
159[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
160[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
161[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292597
162[ 0.000000] Policy zone: Normal
163[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
164[ 0.000000] AGP: Checking aperture...
165[ 0.000000] AGP: No AGP bridge found
166[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
167[ 0.000000] Aperture beyond 4GB. Ignoring.
168[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
169[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
170[ 0.000000] AGP: This costs you 64MB of RAM
171[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
172[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
173[ 0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
174[ 0.000000] Hierarchical RCU implementation.
175[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
176[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
177[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
178[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
179[ 0.000000] spurious 8259A interrupt: IRQ7.
180[ 0.000000] Console: colour VGA+ 80x25
181[ 0.000000] console [tty0] enabled
182[ 0.000000] console [ttyS0] enabled
183[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
184[ 0.000000] hpet clockevent registered
185[ 0.000000] tsc: Fast TSC calibration using PIT
186[ 0.000000] tsc: Detected 1909.876 MHz processor
187[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.75 BogoMIPS (lpj=7639504)
188[ 0.010954] pid_max: default: 32768 minimum: 301
189[ 0.015667] ACPI: Core revision 20140424
190[ 0.022058] ACPI: All ACPI Tables successfully acquired
191[ 0.027609] Security Framework initialized
192[ 0.031789] AppArmor: AppArmor disabled by boot time parameter
193[ 0.037699] Yama: disabled by default; enable with sysctl kernel.yama.*
194[ 0.045531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
195[ 0.058805] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
196[ 0.068638] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
197[ 0.075661] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
198[ 0.083624] Initializing cgroup subsys memory
199[ 0.088106] Initializing cgroup subsys devices
200[ 0.092657] Initializing cgroup subsys freezer
201[ 0.097192] Initializing cgroup subsys net_cls
202[ 0.101726] Initializing cgroup subsys blkio
203[ 0.106082] Initializing cgroup subsys perf_event
204[ 0.110878] Initializing cgroup subsys net_prio
205[ 0.115536] tseg: 0000000000
206[ 0.115550] CPU: Physical Processor ID: 0
207[ 0.119669] CPU: Processor Core ID: 0
208[ 0.124474] mce: CPU supports 6 MCE banks
209[ 0.128615] LVT offset 0 assigned for vector 0xf9
210[ 0.133410] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
211Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
212tlb_flushall_shift: 6
213[ 0.148888] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
214[ 0.158023] ftrace: allocating 21601 entries in 85 pages
215[ 0.173481] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
216[ 0.219133] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
217[ 0.336302] Performance Events: AMD PMU driver.
218[ 0.341014] ... version: 0
219[ 0.345110] ... bit width: 48
220[ 0.349287] ... generic registers: 4
221[ 0.353395] ... value mask: 0000ffffffffffff
222[ 0.358785] ... max period: 00007fffffffffff
223[ 0.364190] ... fixed-purpose events: 0
224[ 0.368294] ... event mask: 000000000000000f
225[ 0.376312] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
226[ 0.384621] x86: Booting SMP configuration:
227[ 0.388887] .... node #0, CPUs: #1 #2 #3
228[ 0.433497] .... node #1, CPUs: #4 #5 #6 #7
229[ 0.585079] x86: Booted up 2 nodes, 8 CPUs
230[ 0.589509] smpboot: Total of 8 processors activated (30558.22 BogoMIPS)
231[ 0.602160] devtmpfs: initialized
232[ 0.614166] pinctrl core: initialized pinctrl subsystem
233[ 0.619634] NET: Registered protocol family 16
234[ 0.624372] cpuidle: using governor ladder
235[ 0.628547] cpuidle: using governor menu
236[ 0.632549] node 0 link 1: io port [1000, 3fff]
237[ 0.632552] TOM: 00000000e0000000 aka 3584M
238[ 0.636811] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
239[ 0.636815] node 0 link 1: mmio [fc000000, fc3fffff]
240[ 0.636818] node 0 link 1: mmio [f8000000, fbffffff]
241[ 0.636820] TOM2: 0000000160000000 aka 5632M
242[ 0.641160] bus: [bus 00-05] on node 0 link 1
243[ 0.641162] bus: 00 [io 0x0000-0xffff]
244[ 0.641164] bus: 00 [mem 0xf0000000-0xffffffff]
245[ 0.641166] bus: 00 [mem 0x160000000-0xfcffffffff]
246[ 0.641272] ACPI: bus type PCI registered
247[ 0.645362] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
248[ 0.652042] PCI: Using configuration type 1 for base access
249[ 0.657694] PCI: Using configuration type 1 for extended access
250[ 0.664315] mtrr: your CPUs had inconsistent variable MTRR settings
251[ 0.670678] mtrr: probably your BIOS does not setup all CPUs.
252[ 0.676503] mtrr: corrected configuration.
253[ 0.693207] ACPI: Added _OSI(Module Device)
254[ 0.697513] ACPI: Added _OSI(Processor Device)
255[ 0.702039] ACPI: Added _OSI(3.0 _SCP Extensions)
256[ 0.706822] ACPI: Added _OSI(Processor Aggregator Device)
257[ 0.715763] ACPI: Interpreter enabled
258[ 0.719507] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
259[ 0.728958] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
260[ 0.738406] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
261[ 0.747851] ACPI: (supports S0 S1 S5)
262[ 0.751610] ACPI: Using IOAPIC for interrupt routing
263[ 0.756705] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
264[ 0.785587] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
265[ 0.791859] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
266[ 0.800177] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
267[ 0.838035] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
268[ 0.848164] PCI host bridge to bus 0000:00
269[ 0.852338] pci_bus 0000:00: root bus resource [bus 00-05]
270[ 0.857894] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
271[ 0.864151] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
272[ 0.871109] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
273[ 0.878065] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
274[ 0.884341] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
275[ 0.884533] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
276[ 0.884541] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
277[ 0.884674] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
278[ 0.884685] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
279[ 0.884710] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
280[ 0.884718] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
281[ 0.884760] pci 0000:00:01.1: PME# supported from D3hot D3cold
282[ 0.884865] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
283[ 0.884879] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
284[ 0.884908] pci 0000:00:02.0: supports D1 D2
285[ 0.884937] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
286[ 0.885001] pci 0000:00:02.0: System wakeup disabled by ACPI
287[ 0.890810] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
288[ 0.890823] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
289[ 0.890873] pci 0000:00:02.1: supports D1 D2
290[ 0.890883] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
291[ 0.890982] pci 0000:00:02.1: System wakeup disabled by ACPI
292[ 0.896797] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
293[ 0.896823] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
294[ 0.896847] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
295[ 0.904075] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
296[ 0.910693] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
297[ 0.917910] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
298[ 0.924636] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
299[ 0.924645] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
300[ 0.924650] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
301[ 0.924655] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
302[ 0.924659] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
303[ 0.924664] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
304[ 0.924669] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
305[ 0.924814] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
306[ 0.924824] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
307[ 0.924829] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
308[ 0.924833] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
309[ 0.924838] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
310[ 0.924842] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
311[ 0.924847] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
312[ 0.925019] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
313[ 0.925137] pci 0000:00:09.0: System wakeup disabled by ACPI
314[ 0.930954] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
315[ 0.931003] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.931052] pci 0000:00:0b.0: System wakeup disabled by ACPI
317[ 0.936862] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
318[ 0.936917] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.936974] pci 0000:00:0c.0: System wakeup disabled by ACPI
320[ 0.942787] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
321[ 0.942845] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.942939] pci 0000:00:0d.0: System wakeup disabled by ACPI
323[ 0.948757] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
324[ 0.948806] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.948863] pci 0000:00:0e.0: System wakeup disabled by ACPI
326[ 0.954679] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
327[ 0.954840] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
328[ 0.954977] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
329[ 0.955097] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
330[ 0.955238] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
331[ 0.955347] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
332[ 0.955465] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
333[ 0.955590] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
334[ 0.955719] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
335[ 0.955895] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
336[ 0.956097] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
337[ 0.956142] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
338[ 0.956149] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
339[ 0.956156] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
340[ 0.956204] pci 0000:01:04.0: supports D1 D2
341[ 0.956307] pci 0000:00:09.0: PCI bridge to [bus 01]
342[ 0.961372] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
343[ 0.961376] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
344[ 0.961379] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
345[ 0.961528] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.961571] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
347[ 0.961607] pci 0000:02:00.0: reg 0x30: [mem 0x29c00000-0x29c0ffff pref]
348[ 0.961684] pci 0000:02:00.0: PME# supported from D3hot D3cold
349[ 0.961827] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.971941] pci 0000:00:0b.0: PCI bridge to [bus 02]
351[ 0.976979] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
352[ 0.977086] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
353[ 0.977118] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
354[ 0.977224] pci 0000:03:00.0: PME# supported from D3hot D3cold
355[ 0.977313] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
356[ 0.987432] pci 0000:00:0c.0: PCI bridge to [bus 03]
357[ 0.992488] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
358[ 0.992572] pci 0000:00:0d.0: PCI bridge to [bus 04]
359[ 0.997706] pci 0000:00:0e.0: PCI bridge to [bus 05]
360[ 1.002794] pci_bus 0000:00: on NUMA node 0
361[ 1.002895] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
362[ 1.009317] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
363[ 1.015741] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
364[ 1.023408] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
365[ 1.031083] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
366[ 1.038745] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
367[ 1.046405] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
368[ 1.052825] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
369[ 1.059253] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
370[ 1.066906] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
371[ 1.074576] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
372[ 1.082240] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
373[ 1.088669] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
374[ 1.095091] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
375[ 1.102770] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
376[ 1.110435] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
377[ 1.118102] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
378[ 1.127231] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
379[ 1.133959] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
380[ 1.140678] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
381[ 1.147388] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
382[ 1.154397] ACPI: Enabled 1 GPEs in block 00 to 1F
383[ 1.159653] vgaarb: setting as boot device: PCI:0000:01:04.0
384[ 1.165441] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
385[ 1.173640] vgaarb: loaded
386[ 1.176443] vgaarb: bridge control possible 0000:01:04.0
387[ 1.182003] PCI: Using ACPI for IRQ routing
388[ 1.186285] PCI: pci_cache_line_size set to 64 bytes
389[ 1.186342] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
390[ 1.186345] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
391[ 1.186659] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
392[ 1.193794] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
393[ 1.199085] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
394[ 1.207806] Switched to clocksource hpet
395[ 1.223305] pnp: PnP ACPI init
396[ 1.226524] ACPI: bus type PNP registered
397[ 1.231154] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
398[ 1.231234] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
399[ 1.231333] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
400[ 1.231412] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
401[ 1.231453] pnp 00:04: [dma 2]
402[ 1.231495] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
403[ 1.231517] pnp: PnP ACPI: found 5 devices
404[ 1.235716] ACPI: bus type PNP unregistered
405[ 1.247811] pci 0000:02:00.0: can't claim BAR 6 [mem 0x29c00000-0x29c0ffff pref]: no compatible bridge window
406[ 1.257879] pci 0000:00:09.0: PCI bridge to [bus 01]
407[ 1.262931] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
408[ 1.269111] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
409[ 1.275984] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
410[ 1.283316] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
411[ 1.290672] pci 0000:00:0b.0: PCI bridge to [bus 02]
412[ 1.295723] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
413[ 1.302598] pci 0000:00:0c.0: PCI bridge to [bus 03]
414[ 1.307644] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
415[ 1.314519] pci 0000:00:0d.0: PCI bridge to [bus 04]
416[ 1.319568] pci 0000:00:0e.0: PCI bridge to [bus 05]
417[ 1.324611] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
418[ 1.324614] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
419[ 1.324617] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
420[ 1.324619] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
421[ 1.324622] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
422[ 1.324625] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
423[ 1.324627] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
424[ 1.324630] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
425[ 1.324633] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
426[ 1.324762] NET: Registered protocol family 2
427[ 1.329726] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
428[ 1.337535] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
429[ 1.344955] TCP: Hash tables configured (established 65536 bind 65536)
430[ 1.351667] TCP: reno registered
431[ 1.354987] UDP hash table entries: 4096 (order: 5, 131072 bytes)
432[ 1.361258] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
433[ 1.368127] NET: Registered protocol family 1
434[ 1.372963] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
435[ 1.379159] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
436[ 1.385144] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.390755] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.396357] pci 0000:00:0b.0: Found disabled HT MSI Mapping
439[ 1.402014] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.407629] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.413227] pci 0000:00:0c.0: Found disabled HT MSI Mapping
442[ 1.418885] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.424488] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.430074] pci 0000:00:0d.0: Found disabled HT MSI Mapping
445[ 1.435743] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.441360] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.446949] pci 0000:00:0e.0: Found disabled HT MSI Mapping
448[ 1.452603] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.458190] pci 0000:01:04.0: Video device with shadowed ROM
450[ 1.458199] PCI: CLS 64 bytes, default 64
451[ 1.458308] Unpacking initramfs...
452[ 1.691423] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
453[ 1.699419] PCI-DMA: Disabling AGP.
454[ 1.704620] PCI-DMA: aperture base @ d4000000 size 65536 KB
455[ 1.710292] PCI-DMA: using GART IOMMU.
456[ 1.714126] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
457[ 1.726264] platform rtc_cmos: registered platform RTC device (no PNP device found)
458[ 1.734610] microcode: CPU0: patch_level=0x01000096
459[ 1.739609] microcode: CPU1: patch_level=0x01000096
460[ 1.744617] microcode: CPU2: patch_level=0x01000096
461[ 1.749629] microcode: CPU3: patch_level=0x01000096
462[ 1.754643] microcode: CPU4: patch_level=0x01000096
463[ 1.759642] microcode: CPU5: patch_level=0x01000096
464[ 1.764637] microcode: CPU6: patch_level=0x01000096
465[ 1.770739] microcode: CPU7: patch_level=0x01000096
466[ 1.775822] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
467[ 1.784762] LVT offset 1 assigned for vector 0x400
468[ 1.789679] IBS: LVT offset 1 assigned
469[ 1.793559] perf: AMD IBS detected (0x00000007)
470[ 1.798779] futex hash table entries: 2048 (order: 5, 131072 bytes)
471[ 1.805275] audit: initializing netlink subsys (disabled)
472[ 1.810789] audit: type=2000 audit(1427418734.620:1): initialized
473[ 1.817702] HugeTLB registered 2 MB page size, pre-allocated 0 pages
474[ 1.824205] zbud: loaded
475[ 1.827166] VFS: Disk quotas dquot_6.5.2
476[ 1.831224] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
477[ 1.837873] msgmni has been set to 9941
478[ 1.842340] alg: No test for stdrng (krng)
479[ 1.846648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
480[ 1.854289] io scheduler noop registered
481[ 1.858326] io scheduler deadline registered
482[ 1.862758] io scheduler cfq registered (default)
483[ 1.867772] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
484[ 1.867899] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
485[ 1.868026] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
486[ 1.868146] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
487[ 1.868294] aer 0000:00:0b.0:pcie02: service driver aer loaded
488[ 1.868322] aer 0000:00:0c.0:pcie02: service driver aer loaded
489[ 1.868347] aer 0000:00:0d.0:pcie02: service driver aer loaded
490[ 1.868373] aer 0000:00:0e.0:pcie02: service driver aer loaded
491[ 1.868393] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
492[ 1.875488] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
493[ 1.882127] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
494[ 1.882137] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
495[ 1.889178] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
496[ 1.895789] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
497[ 1.895799] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
498[ 1.902842] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
499[ 1.902854] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
500[ 1.909893] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
501[ 1.909923] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
502[ 1.915616] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
503[ 1.922457] GHES: HEST is not enabled!
504[ 1.926423] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
505[ 1.953220] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
506[ 1.981026] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
507[ 1.989048] Linux agpgart interface v0.103
508[ 1.993458] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
509[ 2.003839] serio: i8042 KBD port at 0x60,0x64 irq 1
510[ 2.008937] serio: i8042 AUX port at 0x60,0x64 irq 12
511[ 2.014264] mousedev: PS/2 mouse device common for all mice
512[ 2.020048] rtc_cmos rtc_cmos: RTC can wake from S4
513[ 2.025266] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
514[ 2.031776] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
515[ 2.039758] ledtrig-cpu: registered to indicate activity on CPUs
516[ 2.045978] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
517[ 2.052525] AMD IOMMUv2 functionality not available on this system
518[ 2.058926] TCP: cubic registered
519[ 2.062479] NET: Registered protocol family 10
520[ 2.067440] mip6: Mobile IPv6
521[ 2.070517] NET: Registered protocol family 17
522[ 2.075115] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
523[ 2.083875] mpls_gso: MPLS GSO support
524[ 2.088599] registered taskstats version 1
525[ 2.093530] rtc_cmos rtc_cmos: setting system clock to 2015-03-27 01:12:16 UTC (1427418736)
526[ 2.102111] PM: Hibernation image not present or could not be loaded.
527[ 2.103931] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
528[ 2.111945] Write protecting the kernel read-only data: 8192k
529[ 2.121280] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
530[ 2.130018] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
531[ 2.150107] systemd-udevd[99]: starting version 215
532[ 2.155667] random: systemd-udevd urandom read with 3 bits of entropy available
533[ 2.178659] pps_core: LinuxPPS API ver. 1 registered
534[ 2.178692] ACPI: bus type USB registered
535[ 2.178755] usbcore: registered new interface driver usbfs
536[ 2.178772] usbcore: registered new interface driver hub
537[ 2.178865] usbcore: registered new device driver usb
538[ 2.203935] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
539[ 2.213508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
540[ 2.220432] PTP clock support registered
541[ 2.224749] ehci-pci: EHCI PCI platform driver
542[ 2.229582] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
543[ 2.229638] ehci-pci 0000:00:02.1: EHCI Host Controller
544[ 2.229655] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
545[ 2.229675] ehci-pci 0000:00:02.1: debug port 1
546[ 2.229721] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
547[ 2.229752] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
548[ 2.239492] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
549[ 2.239576] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
550[ 2.239578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
551[ 2.239579] usb usb1: Product: EHCI Host Controller
552[ 2.239581] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
553[ 2.239582] usb usb1: SerialNumber: 0000:00:02.1
554[ 2.239916] hub 1-0:1.0: USB hub found
555[ 2.239927] hub 1-0:1.0: 10 ports detected
556[ 2.303312] tg3.c:v3.137 (May 11, 2014)
557[ 2.307295] tg3 0000:02:00.0: enabling device (0004 -> 0006)
558[ 2.313280] ohci-pci: OHCI PCI platform driver
559[ 2.313364] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
560[ 2.323925] ohci-pci 0000:00:02.0: OHCI PCI host controller
561[ 2.329663] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
562[ 2.337261] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
563[ 2.354586] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
564[ 2.364983] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
565[ 2.374843] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
566[ 2.382806] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
567[ 2.389743] tg3 0000:03:00.0: enabling device (0004 -> 0006)
568[ 2.397552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
569[ 2.404426] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
570[ 2.411773] usb usb2: Product: OHCI PCI host controller
571[ 2.417087] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
572[ 2.423275] usb usb2: SerialNumber: 0000:00:02.0
573[ 2.428127] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
574[ 2.434271] hub 2-0:1.0: USB hub found
575[ 2.438143] hub 2-0:1.0: 10 ports detected
576[ 2.475776] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
577[ 2.486201] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
578[ 2.496065] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
579[ 2.504039] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
580[ 2.517586] FS-Cache: Loaded
581[ 2.524567] RPC: Registered named UNIX socket transport module.
582[ 2.531237] RPC: Registered udp transport module.
583[ 2.537284] RPC: Registered tcp transport module.
584[ 2.543374] RPC: Registered tcp NFSv4.1 backchannel transport module.
585[ 2.555821] FS-Cache: Netfs 'nfs' registered for caching
586[ 2.569886] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
587[ 2.615448] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
588[ 2.723305] tsc: Refined TSC clocksource calibration: 1909.787 MHz
589[ 3.727049] Switched to clocksource tsc
590[ 4.195946] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
591[ 4.202647] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
592[ 4.209645] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
593[ 6.111023] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
594[ 6.125191] systemd[1]: Detected architecture 'x86-64'.
595[ 6.324796] random: nonblocking pool is initialized
596[ 6.343788] systemd[1]: Inserted module 'autofs4'
597[ 6.350566] systemd[1]: Set hostname to <cb-test-tgt>.
598[ 6.672936] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
599[ 6.685842] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
600[ 6.701195] systemd[1]: Expecting device dev-ttyS0.device...
601[ 6.718070] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
602[ 6.726091] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
603[ 6.733799] systemd[1]: Starting Remote File Systems (Pre).
604[ 6.750028] systemd[1]: Reached target Remote File Systems (Pre).
605[ 6.756403] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
606[ 6.777955] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
607[ 6.787534] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
608[ 6.795710] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
609[ 6.803744] systemd[1]: Starting Paths.
610[ 6.817933] systemd[1]: Reached target Paths.
611[ 6.822415] systemd[1]: Starting Encrypted Volumes.
612[ 6.837927] systemd[1]: Reached target Encrypted Volumes.
613[ 6.843477] systemd[1]: Starting Swap.
614[ 6.857908] systemd[1]: Reached target Swap.
615[ 6.862320] systemd[1]: Starting Root Slice.
616[ 6.913924] systemd[1]: Created slice Root Slice.
617[ 6.918789] systemd[1]: Starting User and Session Slice.
618[ 6.933918] systemd[1]: Created slice User and Session Slice.
619[ 6.939828] systemd[1]: Starting Delayed Shutdown Socket.
620[ 6.953897] systemd[1]: Listening on Delayed Shutdown Socket.
621[ 6.959822] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
622[ 6.977861] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
623[ 6.984952] systemd[1]: Starting Journal Socket (/dev/log).
624[ 7.001924] systemd[1]: Listening on Journal Socket (/dev/log).
625[ 7.008158] systemd[1]: Starting Syslog Socket.
626[ 7.021851] systemd[1]: Listening on Syslog Socket.
627[ 7.027943] systemd[1]: Starting udev Kernel Socket.
628[ 7.041838] systemd[1]: Listening on udev Kernel Socket.
629[ 7.047268] systemd[1]: Starting udev Control Socket.
630[ 7.061831] systemd[1]: Listening on udev Control Socket.
631[ 7.067372] systemd[1]: Starting Journal Socket.
632[ 7.081824] systemd[1]: Listening on Journal Socket.
633[ 7.086932] systemd[1]: Starting Sockets.
634[ 7.101812] systemd[1]: Reached target Sockets.
635[ 7.106457] systemd[1]: Starting System Slice.
636[ 7.121813] systemd[1]: Created slice System Slice.
637[ 7.126811] systemd[1]: Starting system-getty.slice.
638[ 7.141824] systemd[1]: Created slice system-getty.slice.
639[ 7.147365] systemd[1]: Starting system-serial\x2dgetty.slice.
640[ 7.165829] systemd[1]: Created slice system-serial\x2dgetty.slice.
641[ 7.172894] systemd[1]: Starting Create list of required static device nodes for the current kernel...
642[ 7.195151] systemd[1]: Mounting Debug File System...
643[ 7.223745] systemd[1]: Started Set Up Additional Binary Formats.
644[ 7.230018] systemd[1]: Mounting Huge Pages File System...
645[ 7.275538] systemd[1]: Starting Load Kernel Modules...
646[ 7.291355] systemd[1]: Mounting POSIX Message Queue File System...
647[ 7.310746] systemd[1]: Starting udev Coldplug all Devices...
648[ 7.326842] systemd[1]: Starting Journal Service...
649[ 7.353839] systemd[1]: Started Journal Service.
650[ 7.796357] systemd-udevd[188]: starting version 215
651[ 8.064245] systemd-journald[168]: Received request to flush runtime journal from PID 1
652[ 8.860748] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
653[ 8.868705] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
654[ 8.887392] EDAC MC: Ver: 3.0.0
655[ 8.891240] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
656[ 8.899797] ACPI: Power Button [PWRB]
657[ 8.903692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
658[ 8.911394] ACPI: Power Button [PWRF]
659[ 8.989929] MCE: In-kernel MCE decoding enabled.
660[ 8.997166] FDC 0 is a post-1991 82077
661[ 9.053250] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
662[ 9.060379] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
663[ 9.228235] SCSI subsystem initialized
664[ 9.232461] AMD64 EDAC driver v3.4.0
665[ 9.236531] acpi-cpufreq: overriding BIOS provided _PSD data
666[ 9.243232] input: PC Speaker as /devices/platform/pcspkr/input/input4
667[ 9.274451] libata version 3.00 loaded.
668[ 9.381387] kvm: Nested Virtualization enabled
669[ 9.385999] kvm: Nested Paging enabled
670[ 12.296001] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
671[ 12.301490] EDAC amd64: DRAM ECC enabled.
672[ 12.301522] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
673[ 12.312480] EDAC amd64: F10h detected (node 0).
674[ 12.317174] EDAC MC: DCT0 chip selects:
675[ 12.317177] EDAC amd64: MC: 0: 0MB 1: 0MB
676[ 12.322008] EDAC amd64: MC: 2: 0MB 3: 0MB
677[ 12.326795] EDAC amd64: MC: 4: 0MB 5: 0MB
678[ 12.331572] EDAC amd64: MC: 6: 1024MB 7: 1024MB
679[ 12.336343] EDAC MC: DCT1 chip selects:
680[ 12.336346] EDAC amd64: MC: 0: 0MB 1: 0MB
681[ 12.341125] EDAC amd64: MC: 2: 0MB 3: 0MB
682[ 12.345902] EDAC amd64: MC: 4: 0MB 5: 0MB
683[ 12.350690] EDAC amd64: MC: 6: 1024MB 7: 1024MB
684[ 12.355485] EDAC amd64: using x4 syndromes.
685[ 12.359760] EDAC amd64: MCT channel count: 2
686[ 12.364219] EDAC amd64: CS6: Registered DDR2 RAM
687[ 12.368981] EDAC amd64: CS7: Registered DDR2 RAM
688[ 12.374153] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
689[ 12.384102] EDAC amd64: DRAM ECC enabled.
690[ 12.388284] EDAC amd64: F10h detected (node 1).
691[ 12.392956] EDAC MC: DCT0 chip selects:
692[ 12.392960] EDAC amd64: MC: 0: 1024MB 1: 0MB
693[ 12.397764] EDAC amd64: MC: 2: 0MB 3: 0MB
694[ 12.402566] EDAC amd64: MC: 4: 0MB 5: 0MB
695[ 12.407361] EDAC amd64: MC: 6: 0MB 7: 0MB
696[ 12.412135] EDAC MC: DCT1 chip selects:
697[ 12.412137] EDAC amd64: MC: 0: 0MB 1: 0MB
698[ 12.412143] EDAC amd64: MC: 2: 0MB 3: 0MB
699[ 12.412152] EDAC amd64: MC: 4: 0MB 5: 0MB
700[ 12.412158] EDAC amd64: MC: 6: 0MB 7: 0MB
701[ 12.412161] EDAC amd64: using x4 syndromes.
702[ 12.412164] EDAC amd64: MCT channel count: 1
703[ 12.412214] EDAC amd64: CS0: Registered DDR2 RAM
704[ 12.412453] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
705[ 12.412551] sata_nv 0000:00:07.0: version 3.5
706[ 12.412574] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
707[ 12.412957] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
708[ 12.414077] scsi0 : sata_nv
709[ 12.422178] scsi1 : sata_nv
710[ 12.422272] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
711[ 12.422276] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
712[ 12.422669] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
713[ 12.423233] scsi2 : sata_nv
714[ 12.423399] scsi3 : sata_nv
715[ 12.423484] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
716[ 12.423487] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
717[ 12.423566] pata_amd 0000:00:06.0: version 0.4.1
718[ 12.424379] scsi4 : pata_amd
719[ 12.424561] scsi5 : pata_amd
720[ 12.424643] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
721[ 12.424645] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
722[ 12.731853] ata3: SATA link down (SStatus 0 SControl 300)
723[ 12.731874] ata1: SATA link down (SStatus 0 SControl 300)
724[ 13.043748] ata2: SATA link down (SStatus 0 SControl 300)
725[ 13.359643] ata4: SATA link down (SStatus 0 SControl 300)