Gitiles
Code Review Sign In
review.coreboot.org / board-status / 8da071f31538aae22291bada94291e4e87931d36 / . / asus / kfsn4-dre / 4.0-9941-gf099e1b / 2015-06-10T01:15:10Z / kernel_log.txt
blob: 94748a1ee23635ce45ab3b84478cae070fbcf739 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Stand8da071f2015-06-10 03:45:32 +0000[diff] [blame^]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dff9afff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000dff9b000-0x00000000efffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9941-gf099e1b-dirty 06/10/2015
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
29[ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000160000000 aka 5632M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xdff9b max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
43[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
44[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
46[ 0.000000] [mem 0x15fe00000-0x15fffffff] page 2M
47[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
48[ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
49[ 0.000000] [mem 0x15c000000-0x15fdfffff] page 2M
50[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
51[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
52[ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
53[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdff9afff]
54[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
55[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
56[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
57[ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M
58[ 0.000000] [mem 0xdfe00000-0xdff9afff] page 4k
59[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
60[ 0.000000] ACPI: Early table checksum verification disabled
61[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
62[ 0.000000] ACPI: XSDT 0x00000000DFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
63[ 0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
64[ 0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
65[ 0.000000] ACPI: FACS 0x00000000DFFB4210 000040
66[ 0.000000] ACPI: SSDT 0x00000000DFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
67[ 0.000000] ACPI: TCPA 0x00000000DFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: APIC 0x00000000DFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: SRAT 0x00000000DFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SLIT 0x00000000DFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: HPET 0x00000000DFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: SRAT 0x00000000DFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
73[ 0.000000] ACPI: SLIT 0x00000000DFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
74[ 0.000000] ACPI: Local APIC address 0xfee00000
75[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
77[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
78[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
79[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
81[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
82[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
84[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
85[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
86[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
87[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
88[ 0.000000] NUMA: Initialized distance table, cnt=3
89[ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
90[ 0.000000] Scanning NUMA topology in Northbridge 24
91[ 0.000000] Number of physical nodes 2
92[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
93[ 0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
94[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
95[ 0.000000] NODE_DATA [mem 0x11fffb000-0x11fffffff]
96[ 0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
97[ 0.000000] NODE_DATA [mem 0x15fff9000-0x15fffdfff]
98[ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
99[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
100[ 0.000000] [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
101[ 0.000000] Zone ranges:
102[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
103[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
104[ 0.000000] Normal [mem 0x100000000-0x15fffffff]
105[ 0.000000] Movable zone start for each node
106[ 0.000000] Early memory node ranges
107[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
108[ 0.000000] node 0: [mem 0x00100000-0xdff9afff]
109[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
110[ 0.000000] node 1: [mem 0x120000000-0x15fffffff]
111[ 0.000000] On node 0 totalpages: 1048377
112[ 0.000000] DMA zone: 56 pages used for memmap
113[ 0.000000] DMA zone: 21 pages reserved
114[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
115[ 0.000000] DMA32 zone: 12487 pages used for memmap
116[ 0.000000] DMA32 zone: 913307 pages, LIFO batch:31
117[ 0.000000] Normal zone: 1792 pages used for memmap
118[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
119[ 0.000000] On node 1 totalpages: 262144
120[ 0.000000] Normal zone: 3584 pages used for memmap
121[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
122[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
123[ 0.000000] ACPI: Local APIC address 0xfee00000
124[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
125[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
126[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
127[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
128[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
129[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
130[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
131[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
133[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
134[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
135[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
136[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
137[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
138[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
139[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
140[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
141[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
142[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
143[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
144[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
145[ 0.000000] ACPI: IRQ9 used by override.
146[ 0.000000] ACPI: IRQ14 used by override.
147[ 0.000000] ACPI: IRQ15 used by override.
148[ 0.000000] Using ACPI (MADT) for SMP configuration information
149[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
150[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
151[ 0.000000] nr_irqs_gsi: 40
152[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
153[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
154[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
155[ 0.000000] PM: Registered nosave memory: [mem 0xdff9b000-0xefffffff]
156[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
157[ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
158[ 0.000000] Booting paravirtualized kernel on bare hardware
159[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
160[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
161[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
162[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
163[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
164[ 0.000000] Policy zone: Normal
165[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
166[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
167[ 0.000000] AGP: Checking aperture...
168[ 0.000000] AGP: No AGP bridge found
169[ 0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
170[ 0.000000] Aperture beyond 4GB. Ignoring.
171[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
172[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
173[ 0.000000] AGP: This costs you 64MB of RAM
174[ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
175[ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
176[ 0.000000] Memory: 5015444K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
177[ 0.000000] Hierarchical RCU implementation.
178[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
179[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
180[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
181[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
182[ 0.000000] spurious 8259A interrupt: IRQ7.
183[ 0.000000] Console: colour VGA+ 80x25
184[ 0.000000] console [tty0] enabled
185[ 0.000000] console [ttyS0] enabled
186[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
187[ 0.000000] hpet clockevent registered
188[ 0.000000] tsc: Fast TSC calibration using PIT
189[ 0.000000] tsc: Detected 1909.795 MHz processor
190[ 0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.59 BogoMIPS (lpj=7639180)
191[ 0.010953] pid_max: default: 32768 minimum: 301
192[ 0.015675] ACPI: Core revision 20140424
193[ 0.022091] ACPI: All ACPI Tables successfully acquired
194[ 0.027601] Security Framework initialized
195[ 0.031780] AppArmor: AppArmor disabled by boot time parameter
196[ 0.037690] Yama: disabled by default; enable with sysctl kernel.yama.*
197[ 0.045506] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
198[ 0.058799] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
199[ 0.068670] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
200[ 0.075668] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
201[ 0.083613] Initializing cgroup subsys memory
202[ 0.088078] Initializing cgroup subsys devices
203[ 0.092631] Initializing cgroup subsys freezer
204[ 0.097165] Initializing cgroup subsys net_cls
205[ 0.101714] Initializing cgroup subsys blkio
206[ 0.106072] Initializing cgroup subsys perf_event
207[ 0.110869] Initializing cgroup subsys net_prio
208[ 0.116597] tseg: 0000000000
209[ 0.116611] CPU: Physical Processor ID: 0
210[ 0.120738] CPU: Processor Core ID: 0
211[ 0.124486] mce: CPU supports 6 MCE banks
212[ 0.128593] LVT offset 0 assigned for vector 0xf9
213[ 0.133383] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
214Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
215tlb_flushall_shift: 6
216[ 0.148862] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
217[ 0.158001] ftrace: allocating 21601 entries in 85 pages
218[ 0.173486] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
219[ 0.219135] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
220[ 0.336322] Performance Events: AMD PMU driver.
221[ 0.341043] ... version: 0
222[ 0.345137] ... bit width: 48
223[ 0.349322] ... generic registers: 4
224[ 0.353421] ... value mask: 0000ffffffffffff
225[ 0.358819] ... max period: 00007fffffffffff
226[ 0.364217] ... fixed-purpose events: 0
227[ 0.368320] ... event mask: 000000000000000f
228[ 0.376340] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
229[ 0.384694] x86: Booting SMP configuration:
230[ 0.388963] .... node #0, CPUs: #1 #2 #3
231[ 0.433564] .... node #1, CPUs: #4 #5 #6 #7
232[ 0.585131] x86: Booted up 2 nodes, 8 CPUs
233[ 0.589560] smpboot: Total of 8 processors activated (30557.57 BogoMIPS)
234[ 0.602157] devtmpfs: initialized
235[ 0.614157] pinctrl core: initialized pinctrl subsystem
236[ 0.619638] NET: Registered protocol family 16
237[ 0.624385] cpuidle: using governor ladder
238[ 0.628557] cpuidle: using governor menu
239[ 0.632562] node 0 link 1: io port [1000, 3fff]
240[ 0.632565] TOM: 00000000e0000000 aka 3584M
241[ 0.636822] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
242[ 0.636827] node 0 link 1: mmio [fc000000, fc3fffff]
243[ 0.636830] node 0 link 1: mmio [f8000000, fbffffff]
244[ 0.636832] TOM2: 0000000160000000 aka 5632M
245[ 0.641186] bus: [bus 00-05] on node 0 link 1
246[ 0.641188] bus: 00 [io 0x0000-0xffff]
247[ 0.641190] bus: 00 [mem 0xf0000000-0xffffffff]
248[ 0.641192] bus: 00 [mem 0x160000000-0xfcffffffff]
249[ 0.641296] ACPI: bus type PCI registered
250[ 0.645389] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
251[ 0.652061] PCI: Using configuration type 1 for base access
252[ 0.657703] PCI: Using configuration type 1 for extended access
253[ 0.664332] mtrr: your CPUs had inconsistent variable MTRR settings
254[ 0.670696] mtrr: probably your BIOS does not setup all CPUs.
255[ 0.676519] mtrr: corrected configuration.
256[ 0.693211] ACPI: Added _OSI(Module Device)
257[ 0.697508] ACPI: Added _OSI(Processor Device)
258[ 0.702028] ACPI: Added _OSI(3.0 _SCP Extensions)
259[ 0.706813] ACPI: Added _OSI(Processor Aggregator Device)
260[ 0.715898] ACPI: Interpreter enabled
261[ 0.719672] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
262[ 0.729115] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
263[ 0.738553] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
264[ 0.748016] ACPI: (supports S0 S1 S5)
265[ 0.751750] ACPI: Using IOAPIC for interrupt routing
266[ 0.756834] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
267[ 0.783887] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
268[ 0.790180] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
269[ 0.798491] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
270[ 0.836210] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
271[ 0.846347] PCI host bridge to bus 0000:00
272[ 0.850544] pci_bus 0000:00: root bus resource [bus 00-05]
273[ 0.856118] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
274[ 0.862388] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
275[ 0.869355] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
276[ 0.876306] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
277[ 0.882595] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
278[ 0.882777] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
279[ 0.882784] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
280[ 0.882920] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
281[ 0.882929] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
282[ 0.882948] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
283[ 0.882953] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
284[ 0.883008] pci 0000:00:01.1: PME# supported from D3hot D3cold
285[ 0.883113] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
286[ 0.883121] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
287[ 0.883157] pci 0000:00:02.0: supports D1 D2
288[ 0.883177] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
289[ 0.883242] pci 0000:00:02.0: System wakeup disabled by ACPI
290[ 0.889044] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
291[ 0.889057] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
292[ 0.889106] pci 0000:00:02.1: supports D1 D2
293[ 0.889117] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
294[ 0.889195] pci 0000:00:02.1: System wakeup disabled by ACPI
295[ 0.895007] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
296[ 0.895033] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
297[ 0.895061] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
298[ 0.902295] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
299[ 0.908913] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
300[ 0.916122] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
301[ 0.922834] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
302[ 0.922842] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
303[ 0.922849] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
304[ 0.922854] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
305[ 0.922858] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
306[ 0.922863] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
307[ 0.922868] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
308[ 0.923027] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
309[ 0.923037] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
310[ 0.923042] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
311[ 0.923046] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
312[ 0.923051] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
313[ 0.923055] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
314[ 0.923060] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
315[ 0.923225] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
316[ 0.923324] pci 0000:00:09.0: System wakeup disabled by ACPI
317[ 0.929109] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
318[ 0.929158] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.929209] pci 0000:00:0b.0: System wakeup disabled by ACPI
320[ 0.935011] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
321[ 0.935067] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
322[ 0.935116] pci 0000:00:0c.0: System wakeup disabled by ACPI
323[ 0.940934] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
324[ 0.940984] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
325[ 0.941040] pci 0000:00:0d.0: System wakeup disabled by ACPI
326[ 0.946852] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
327[ 0.946904] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
328[ 0.946952] pci 0000:00:0e.0: System wakeup disabled by ACPI
329[ 0.952780] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
330[ 0.952950] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
331[ 0.953069] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
332[ 0.953199] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
333[ 0.953343] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
334[ 0.953509] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
335[ 0.953663] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
336[ 0.953789] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
337[ 0.953919] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
338[ 0.954079] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
339[ 0.954292] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
340[ 0.954317] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
341[ 0.954336] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
342[ 0.954350] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
343[ 0.954396] pci 0000:01:04.0: supports D1 D2
344[ 0.954483] pci 0000:00:09.0: PCI bridge to [bus 01]
345[ 0.959535] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
346[ 0.959539] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
347[ 0.959542] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
348[ 0.959641] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
349[ 0.959671] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
350[ 0.959714] pci 0000:02:00.0: reg 0x30: [mem 0x78400000-0x7840ffff pref]
351[ 0.959841] pci 0000:02:00.0: PME# supported from D3hot D3cold
352[ 0.959951] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
353[ 0.970071] pci 0000:00:0b.0: PCI bridge to [bus 02]
354[ 0.975126] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
355[ 0.975233] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
356[ 0.975264] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
357[ 0.975361] pci 0000:03:00.0: PME# supported from D3hot D3cold
358[ 0.975450] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
359[ 0.985569] pci 0000:00:0c.0: PCI bridge to [bus 03]
360[ 0.990625] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
361[ 0.990696] pci 0000:00:0d.0: PCI bridge to [bus 04]
362[ 0.995827] pci 0000:00:0e.0: PCI bridge to [bus 05]
363[ 1.000914] pci_bus 0000:00: on NUMA node 0
364[ 1.001015] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
365[ 1.007443] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
366[ 1.013872] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
367[ 1.021527] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
368[ 1.029192] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
369[ 1.036847] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
370[ 1.044496] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
371[ 1.050937] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
372[ 1.057350] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
373[ 1.064996] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
374[ 1.072662] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
375[ 1.080322] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
376[ 1.086747] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
377[ 1.093174] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
378[ 1.100841] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
379[ 1.108495] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
380[ 1.116155] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
381[ 1.125273] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
382[ 1.131990] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
383[ 1.138718] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
384[ 1.145436] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
385[ 1.152438] ACPI: Enabled 1 GPEs in block 00 to 1F
386[ 1.157694] vgaarb: setting as boot device: PCI:0000:01:04.0
387[ 1.163482] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
388[ 1.171671] vgaarb: loaded
389[ 1.174468] vgaarb: bridge control possible 0000:01:04.0
390[ 1.180029] PCI: Using ACPI for IRQ routing
391[ 1.184316] PCI: pci_cache_line_size set to 64 bytes
392[ 1.184373] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
393[ 1.184377] e820: reserve RAM buffer [mem 0xdff9b000-0xdfffffff]
394[ 1.184705] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
395[ 1.191844] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
396[ 1.197154] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
397[ 1.205909] Switched to clocksource hpet
398[ 1.221569] pnp: PnP ACPI init
399[ 1.224797] ACPI: bus type PNP registered
400[ 1.229408] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
401[ 1.229494] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
402[ 1.229577] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
403[ 1.229671] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
404[ 1.229709] pnp 00:04: [dma 2]
405[ 1.229756] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
406[ 1.229779] pnp: PnP ACPI: found 5 devices
407[ 1.233982] ACPI: bus type PNP unregistered
408[ 1.246039] pci 0000:02:00.0: can't claim BAR 6 [mem 0x78400000-0x7840ffff pref]: no compatible bridge window
409[ 1.256109] pci 0000:00:09.0: PCI bridge to [bus 01]
410[ 1.261146] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
411[ 1.267317] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
412[ 1.274193] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
413[ 1.281536] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
414[ 1.288896] pci 0000:00:0b.0: PCI bridge to [bus 02]
415[ 1.293946] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
416[ 1.300822] pci 0000:00:0c.0: PCI bridge to [bus 03]
417[ 1.305885] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
418[ 1.312760] pci 0000:00:0d.0: PCI bridge to [bus 04]
419[ 1.317800] pci 0000:00:0e.0: PCI bridge to [bus 05]
420[ 1.322843] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
421[ 1.322846] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
422[ 1.322849] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
423[ 1.322852] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7]
424[ 1.322855] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
425[ 1.322857] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
426[ 1.322860] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
427[ 1.322863] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
428[ 1.322866] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
429[ 1.323001] NET: Registered protocol family 2
430[ 1.327963] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
431[ 1.335771] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
432[ 1.343191] TCP: Hash tables configured (established 65536 bind 65536)
433[ 1.349879] TCP: reno registered
434[ 1.353201] UDP hash table entries: 4096 (order: 5, 131072 bytes)
435[ 1.359480] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
436[ 1.366343] NET: Registered protocol family 1
437[ 1.371190] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
438[ 1.377371] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
439[ 1.383346] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.388969] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.394557] pci 0000:00:0b.0: Found disabled HT MSI Mapping
442[ 1.400224] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.405831] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.411432] pci 0000:00:0c.0: Found disabled HT MSI Mapping
445[ 1.417091] pci 0000:00:00.0: Found enabled HT MSI Mapping
446[ 1.422703] pci 0000:00:00.0: Found enabled HT MSI Mapping
447[ 1.428290] pci 0000:00:0d.0: Found disabled HT MSI Mapping
448[ 1.433951] pci 0000:00:00.0: Found enabled HT MSI Mapping
449[ 1.439557] pci 0000:00:00.0: Found enabled HT MSI Mapping
450[ 1.445149] pci 0000:00:0e.0: Found disabled HT MSI Mapping
451[ 1.450810] pci 0000:00:00.0: Found enabled HT MSI Mapping
452[ 1.456393] pci 0000:01:04.0: Video device with shadowed ROM
453[ 1.456401] PCI: CLS 64 bytes, default 64
454[ 1.456512] Unpacking initramfs...
455[ 1.689233] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
456[ 1.697244] PCI-DMA: Disabling AGP.
457[ 1.701024] PCI-DMA: aperture base @ d4000000 size 65536 KB
458[ 1.706697] PCI-DMA: using GART IOMMU.
459[ 1.710551] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
460[ 1.723001] platform rtc_cmos: registered platform RTC device (no PNP device found)
461[ 1.731360] microcode: CPU0: patch_level=0x01000096
462[ 1.736360] microcode: CPU1: patch_level=0x01000096
463[ 1.741375] microcode: CPU2: patch_level=0x01000096
464[ 1.746387] microcode: CPU3: patch_level=0x01000096
465[ 1.751396] microcode: CPU4: patch_level=0x01000096
466[ 1.757491] microcode: CPU5: patch_level=0x01000096
467[ 1.762486] microcode: CPU6: patch_level=0x01000096
468[ 1.767475] microcode: CPU7: patch_level=0x01000096
469[ 1.772564] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
470[ 1.781507] LVT offset 1 assigned for vector 0x400
471[ 1.786421] IBS: LVT offset 1 assigned
472[ 1.790286] perf: AMD IBS detected (0x00000007)
473[ 1.795500] futex hash table entries: 2048 (order: 5, 131072 bytes)
474[ 1.801979] audit: initializing netlink subsys (disabled)
475[ 1.807486] audit: type=2000 audit(1433907416.624:1): initialized
476[ 1.814414] HugeTLB registered 2 MB page size, pre-allocated 0 pages
477[ 1.820918] zbud: loaded
478[ 1.823888] VFS: Disk quotas dquot_6.5.2
479[ 1.827929] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
480[ 1.834573] msgmni has been set to 9941
481[ 1.839076] alg: No test for stdrng (krng)
482[ 1.843373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
483[ 1.851029] io scheduler noop registered
484[ 1.855054] io scheduler deadline registered
485[ 1.859477] io scheduler cfq registered (default)
486[ 1.864474] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
487[ 1.864599] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
488[ 1.864727] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
489[ 1.864858] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
490[ 1.865010] aer 0000:00:0b.0:pcie02: service driver aer loaded
491[ 1.865037] aer 0000:00:0c.0:pcie02: service driver aer loaded
492[ 1.865064] aer 0000:00:0d.0:pcie02: service driver aer loaded
493[ 1.865089] aer 0000:00:0e.0:pcie02: service driver aer loaded
494[ 1.865109] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
495[ 1.872215] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
496[ 1.878851] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
497[ 1.878862] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
498[ 1.885897] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
499[ 1.892503] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
500[ 1.892513] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
501[ 1.899566] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
502[ 1.899576] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
503[ 1.906619] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
504[ 1.906649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
505[ 1.912338] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
506[ 1.919160] GHES: HEST is not enabled!
507[ 1.923128] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
508[ 1.949939] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
509[ 1.977728] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
510[ 1.985774] Linux agpgart interface v0.103
511[ 1.990200] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
512[ 2.000674] serio: i8042 KBD port at 0x60,0x64 irq 1
513[ 2.005856] serio: i8042 AUX port at 0x60,0x64 irq 12
514[ 2.011226] mousedev: PS/2 mouse device common for all mice
515[ 2.017014] rtc_cmos rtc_cmos: RTC can wake from S4
516[ 2.022209] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
517[ 2.028702] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
518[ 2.036691] ledtrig-cpu: registered to indicate activity on CPUs
519[ 2.042959] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
520[ 2.049476] AMD IOMMUv2 functionality not available on this system
521[ 2.055880] TCP: cubic registered
522[ 2.059425] NET: Registered protocol family 10
523[ 2.064411] mip6: Mobile IPv6
524[ 2.065933] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
525[ 2.076163] NET: Registered protocol family 17
526[ 2.080719] mpls_gso: MPLS GSO support
527[ 2.085387] registered taskstats version 1
528[ 2.090314] rtc_cmos rtc_cmos: setting system clock to 2015-06-10 03:36:58 UTC (1433907418)
529[ 2.098904] PM: Hibernation image not present or could not be loaded.
530[ 2.100717] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
531[ 2.108736] Write protecting the kernel read-only data: 8192k
532[ 2.118023] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
533[ 2.126743] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
534[ 2.150905] systemd-udevd[98]: starting version 215
535[ 2.156721] random: systemd-udevd urandom read with 3 bits of entropy available
536[ 2.186513] ACPI: bus type USB registered
537[ 2.190836] usbcore: registered new interface driver usbfs
538[ 2.196488] usbcore: registered new interface driver hub
539[ 2.202119] usbcore: registered new device driver usb
540[ 2.202135] pps_core: LinuxPPS API ver. 1 registered
541[ 2.202137] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
542[ 2.222198] PTP clock support registered
543[ 2.226546] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
544[ 2.233582] tg3.c:v3.137 (May 11, 2014)
545[ 2.237538] tg3 0000:02:00.0: enabling device (0004 -> 0006)
546[ 2.243581] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
547[ 2.243612] ehci-pci: EHCI PCI platform driver
548[ 2.254212] ehci-pci 0000:00:02.1: EHCI Host Controller
549[ 2.254218] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
550[ 2.265879] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
551[ 2.273435] ehci-pci 0000:00:02.1: debug port 1
552[ 2.278086] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
553[ 2.278114] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
554[ 2.293659] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
555[ 2.299567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
556[ 2.306451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
557[ 2.313775] usb usb1: Product: EHCI Host Controller
558[ 2.318758] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
559[ 2.321061] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
560[ 2.321063] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
561[ 2.321065] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
562[ 2.321067] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
563[ 2.321188] tg3 0000:03:00.0: enabling device (0004 -> 0006)
564[ 2.321383] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
565[ 2.371383] usb usb1: SerialNumber: 0000:00:02.1
566[ 2.376309] hub 1-0:1.0: USB hub found
567[ 2.380175] hub 1-0:1.0: 10 ports detected
568[ 2.385241] ohci-pci: OHCI PCI platform driver
569[ 2.390035] ohci-pci 0000:00:02.0: OHCI PCI host controller
570[ 2.395726] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
571[ 2.403277] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
572[ 2.433954] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
573[ 2.444386] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
574[ 2.454257] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
575[ 2.462197] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
576[ 2.463574] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
577[ 2.463575] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
578[ 2.463577] usb usb2: Product: OHCI PCI host controller
579[ 2.463578] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
580[ 2.463579] usb usb2: SerialNumber: 0000:00:02.0
581[ 2.463845] hub 2-0:1.0: USB hub found
582[ 2.463856] hub 2-0:1.0: 10 ports detected
583[ 2.514909] FS-Cache: Loaded
584[ 2.521528] RPC: Registered named UNIX socket transport module.
585[ 2.528138] RPC: Registered udp transport module.
586[ 2.534196] RPC: Registered tcp transport module.
587[ 2.540340] RPC: Registered tcp NFSv4.1 backchannel transport module.
588[ 2.552786] FS-Cache: Netfs 'nfs' registered for caching
589[ 2.571022] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
590[ 2.617556] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
591[ 2.721409] tsc: Refined TSC clocksource calibration: 1909.786 MHz
592[ 3.725168] Switched to clocksource tsc
593[ 4.188253] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
594[ 4.194907] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
595[ 4.201873] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
596[ 13.221094] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
597[ 13.235271] systemd[1]: Detected architecture 'x86-64'.
598[ 14.736223] random: nonblocking pool is initialized
599[ 15.980889] systemd[1]: Inserted module 'autofs4'
600[ 15.999447] systemd[1]: Set hostname to <cb-test-tgt>.
601[ 18.770034] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
602[ 18.782927] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
603[ 18.798466] systemd[1]: Expecting device dev-ttyS0.device...
604[ 18.811976] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
605[ 18.819922] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
606[ 18.827645] systemd[1]: Starting Remote File Systems (Pre).
607[ 18.843856] systemd[1]: Reached target Remote File Systems (Pre).
608[ 18.850098] systemd[1]: Starting Encrypted Volumes.
609[ 18.863941] systemd[1]: Reached target Encrypted Volumes.
610[ 18.869543] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
611[ 18.877790] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
612[ 18.885834] systemd[1]: Starting Paths.
613[ 18.899928] systemd[1]: Reached target Paths.
614[ 18.904522] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
615[ 18.927846] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
616[ 18.937429] systemd[1]: Starting Swap.
617[ 18.951825] systemd[1]: Reached target Swap.
618[ 18.956220] systemd[1]: Starting Root Slice.
619[ 18.967821] systemd[1]: Created slice Root Slice.
620[ 18.972669] systemd[1]: Starting User and Session Slice.
621[ 18.987821] systemd[1]: Created slice User and Session Slice.
622[ 18.993714] systemd[1]: Starting Delayed Shutdown Socket.
623[ 19.007808] systemd[1]: Listening on Delayed Shutdown Socket.
624[ 19.013764] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
625[ 19.031788] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
626[ 19.038906] systemd[1]: Starting Journal Socket (/dev/log).
627[ 19.055790] systemd[1]: Listening on Journal Socket (/dev/log).
628[ 19.062947] systemd[1]: Starting udev Kernel Socket.
629[ 19.079780] systemd[1]: Listening on udev Kernel Socket.
630[ 19.085259] systemd[1]: Starting udev Control Socket.
631[ 19.099761] systemd[1]: Listening on udev Control Socket.
632[ 19.105302] systemd[1]: Starting Journal Socket.
633[ 19.119757] systemd[1]: Listening on Journal Socket.
634[ 19.124871] systemd[1]: Starting System Slice.
635[ 19.139748] systemd[1]: Created slice System Slice.
636[ 19.144751] systemd[1]: Starting system-getty.slice.
637[ 19.159755] systemd[1]: Created slice system-getty.slice.
638[ 19.165317] systemd[1]: Starting system-serial\x2dgetty.slice.
639[ 19.179753] systemd[1]: Created slice system-serial\x2dgetty.slice.
640[ 19.186210] systemd[1]: Starting Increase datagram queue length...
641[ 19.205230] systemd[1]: Mounting Debug File System...
642[ 19.221066] systemd[1]: Mounting POSIX Message Queue File System...
643[ 19.762355] systemd[1]: Starting Load Kernel Modules...
644[ 22.287052] systemd[1]: Started Set Up Additional Binary Formats.
645[ 22.303670] systemd[1]: Starting Create list of required static device nodes for the current kernel...
646[ 22.328195] systemd[1]: Starting udev Coldplug all Devices...
647[ 22.344083] systemd[1]: Mounting Huge Pages File System...
648[ 22.360029] systemd[1]: Starting Slices.
649[ 22.374707] systemd[1]: Reached target Slices.
650[ 22.379472] systemd[1]: Starting Remount Root and Kernel File Systems...
651[ 22.410676] systemd[1]: Mounted POSIX Message Queue File System.
652[ 22.426611] systemd[1]: Mounted Debug File System.
653[ 22.442661] systemd[1]: Started Increase datagram queue length.
654[ 22.463105] systemd[1]: Starting Syslog Socket.
655[ 22.478610] systemd[1]: Listening on Syslog Socket.
656[ 22.483615] systemd[1]: Starting Sockets.
657[ 22.498639] systemd[1]: Reached target Sockets.
658[ 22.503347] systemd[1]: Starting Journal Service...
659[ 22.530656] systemd[1]: Started Journal Service.
660[ 26.326372] systemd-udevd[188]: starting version 215
661[ 26.377222] systemd-journald[173]: Received request to flush runtime journal from PID 1
662[ 37.161410] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
663[ 37.169393] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
664[ 37.349632] EDAC MC: Ver: 3.0.0
665[ 37.907594] MCE: In-kernel MCE decoding enabled.
666[ 37.965115] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
667[ 38.074082] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
668[ 38.082629] ACPI: Power Button [PWRB]
669[ 38.086465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
670[ 38.093988] ACPI: Power Button [PWRF]
671[ 38.157114] FDC 0 is a post-1991 82077
672[ 38.607933] SCSI subsystem initialized
673[ 38.661105] AMD64 EDAC driver v3.4.0
674[ 38.664871] EDAC amd64: DRAM ECC enabled.
675[ 38.668991] EDAC amd64: F10h detected (node 0).
676[ 38.673622] EDAC MC: DCT0 chip selects:
677[ 38.673625] EDAC amd64: MC: 0: 0MB 1: 0MB
678[ 38.678452] EDAC amd64: MC: 2: 0MB 3: 0MB
679[ 38.683300] EDAC amd64: MC: 4: 0MB 5: 0MB
680[ 38.688146] EDAC amd64: MC: 6: 1024MB 7: 1024MB
681[ 38.692963] EDAC MC: DCT1 chip selects:
682[ 38.692965] EDAC amd64: MC: 0: 0MB 1: 0MB
683[ 38.697749] EDAC amd64: MC: 2: 0MB 3: 0MB
684[ 38.702533] EDAC amd64: MC: 4: 0MB 5: 0MB
685[ 38.707313] EDAC amd64: MC: 6: 1024MB 7: 1024MB
686[ 38.712104] EDAC amd64: using x4 syndromes.
687[ 38.716367] EDAC amd64: MCT channel count: 2
688[ 38.720757] EDAC amd64: CS6: Registered DDR2 RAM
689[ 38.725463] EDAC amd64: CS7: Registered DDR2 RAM
690[ 38.730399] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
691[ 38.740256] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
692[ 38.745652] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
693[ 38.751462] EDAC amd64: DRAM ECC enabled.
694[ 38.755623] EDAC amd64: F10h detected (node 1).
695[ 38.760278] EDAC MC: DCT0 chip selects:
696[ 38.760280] EDAC amd64: MC: 0: 1024MB 1: 0MB
697[ 38.765077] EDAC amd64: MC: 2: 0MB 3: 0MB
698[ 38.769879] EDAC amd64: MC: 4: 0MB 5: 0MB
699[ 38.774667] EDAC amd64: MC: 6: 0MB 7: 0MB
700[ 38.779468] EDAC MC: DCT1 chip selects:
701[ 38.779470] EDAC amd64: MC: 0: 0MB 1: 0MB
702[ 38.784266] EDAC amd64: MC: 2: 0MB 3: 0MB
703[ 38.789086] EDAC amd64: MC: 4: 0MB 5: 0MB
704[ 38.793857] EDAC amd64: MC: 6: 0MB 7: 0MB
705[ 38.798663] EDAC amd64: using x4 syndromes.
706[ 38.802936] EDAC amd64: MCT channel count: 1
707[ 38.807335] EDAC amd64: CS0: Registered DDR2 RAM
708[ 38.812223] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
709[ 38.822098] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
710[ 39.140829] libata version 3.00 loaded.
711[ 39.219410] input: PC Speaker as /devices/platform/pcspkr/input/input4
712[ 39.275908] sata_nv 0000:00:07.0: version 3.5
713[ 39.276190] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
714[ 39.282633] scsi0 : sata_nv
715[ 39.285721] scsi1 : sata_nv
716[ 39.288669] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
717[ 39.295921] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
718[ 39.303332] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
719[ 39.309596] scsi2 : sata_nv
720[ 39.312618] scsi3 : sata_nv
721[ 39.315545] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
722[ 39.322774] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
723[ 39.440106] acpi-cpufreq: overriding BIOS provided _PSD data
724[ 39.612658] ata1: SATA link down (SStatus 0 SControl 300)
725[ 39.640638] ata3: SATA link down (SStatus 0 SControl 300)
726[ 39.656984] pata_amd 0000:00:06.0: version 0.4.1
727[ 39.657863] scsi4 : pata_amd
728[ 39.661177] scsi5 : pata_amd
729[ 39.664277] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
730[ 39.671381] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
731[ 39.928521] ata2: SATA link down (SStatus 0 SControl 300)
732[ 40.244424] ata4: SATA link down (SStatus 0 SControl 300)
733[ 41.062902] kvm: Nested Virtualization enabled
734[ 41.067471] kvm: Nested Paging enabled
735[ 79.778104] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
736[ 391.569750] nfs: server 10.100.1.1 not responding, still trying
737[ 391.589597] nfs: server 10.100.1.1 OK