Gitiles
Code Review Sign In
review.coreboot.org / board-status / 8a5c00c8d4058c921d6f9e63985efdd7bf478958 / . / pcengines / alix2d / 4.0-6723-ga0a3727 / 2014-08-15T01:44:46Z / kernel_log.txt
blob: 31bcbb83b0154d11fa56f7ed308e46073a42a8bc [file] [log] [blame]
Sevan Janiyan7b4989f2014-08-15 21:24:26 +0100[diff] [blame]1[ 0.030013] smpboot: SMP motherboard not detected
2[ 0.031012] smpboot: Local APIC not detected. Using dummy APIC emulation.
3[ 0.032010] smpboot: SMP disabled
4[ 0.033011] Performance Events: no PMU driver, software events only.
5[ 0.036470] Brought up 1 CPUs
6[ 0.037018] smpboot: Total of 1 processors activated (996.16 BogoMIPS)
7[ 0.039759] devtmpfs: initialized
8[ 0.042369] NET: Registered protocol family 16
9[ 0.047344] PCI: PCI BIOS revision 2.10 entry at 0xfd4b7, last bus=0
10[ 0.048015] PCI: Using configuration type 1 for base access
11[ 0.068526] bio: create slab <bio-0> at 0
12[ 0.070206] ACPI: Interpreter disabled.
13[ 0.072371] vgaarb: loaded
14[ 0.074404] SCSI subsystem initialized
15[ 0.076630] PCI: Probing PCI hardware
16[ 0.077040] PCI: root bus 00: using default resources
17[ 0.077055] PCI: Probing PCI hardware (bus 00)
18[ 0.077297] PCI host bridge to bus 0000:00
19[ 0.078051] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
20[ 0.079024] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
21[ 0.080034] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
22[ 0.081212] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
23[ 0.081356] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f]
24[ 0.082405] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
25[ 0.082652] pci 0000:00:01.2: reg 10: [mem 0xfe020000-0xfe023fff]
26[ 0.083952] pci 0000:00:09.0: [1106:3053] type 00 class 0x020000
27[ 0.084042] pci 0000:00:09.0: reg 10: [io 0x1000-0x10ff]
28[ 0.084076] pci 0000:00:09.0: reg 14: [mem 0xfe029000-0xfe0290ff]
29[ 0.084187] pci 0000:00:09.0: supports D1 D2
30[ 0.084209] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
31[ 0.084279] pci 0000:00:0a.0: [1106:3053] type 00 class 0x020000
32[ 0.084323] pci 0000:00:0a.0: reg 10: [io 0x1400-0x14ff]
33[ 0.084356] pci 0000:00:0a.0: reg 14: [mem 0xfe029100-0xfe0291ff]
34[ 0.084466] pci 0000:00:0a.0: supports D1 D2
35[ 0.084487] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
36[ 0.084545] pci 0000:00:0b.0: [1106:3053] type 00 class 0x020000
37[ 0.084588] pci 0000:00:0b.0: reg 10: [io 0x1800-0x18ff]
38[ 0.084622] pci 0000:00:0b.0: reg 14: [mem 0xfe029200-0xfe0292ff]
39[ 0.084731] pci 0000:00:0b.0: supports D1 D2
40[ 0.084752] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
41[ 0.084814] pci 0000:00:0c.0: [168c:1014] type 00 class 0x020000
42[ 0.084858] pci 0000:00:0c.0: reg 10: [mem 0xfe000000-0xfe00ffff]
43[ 0.085124] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
44[ 0.085440] pci 0000:00:0f.0: reg 10: [io 0x24b0-0x24b7]
45[ 0.085705] pci 0000:00:0f.0: reg 14: [io 0x1c00-0x1cff]
46[ 0.085971] pci 0000:00:0f.0: reg 18: [io 0x2400-0x243f]
47[ 0.086272] pci 0000:00:0f.0: reg 1c: [io 0x2480-0x249f]
48[ 0.086544] pci 0000:00:0f.0: reg 20: [io 0x2000-0x207f]
49[ 0.086827] pci 0000:00:0f.0: reg 24: [io 0x2440-0x247f]
50[ 0.087427] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
51[ 0.088353] pci 0000:00:0f.2: reg 20: [io 0x24a0-0x24af]
52[ 0.089120] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
53[ 0.089468] pci 0000:00:0f.4: reg 10: [mem 0xfe026000-0xfe026fff]
54[ 0.091021] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
55[ 0.091350] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
56[ 0.091691] pci 0000:00:0f.5: reg 10: [mem 0xfe027000-0xfe027fff]
57[ 0.093234] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
58[ 0.093472] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
59[ 0.096709] PCI: pci_cache_line_size set to 32 bytes
60[ 0.097117] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
61[ 0.097135] e820: reserve RAM buffer [mem 0x0f7b0000-0x0fffffff]
62[ 0.098342] Switching to clocksource pit
63[ 0.099482] pnp: PnP ACPI: disabled
64[ 0.120954] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
65[ 0.120983] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
66[ 0.121129] NET: Registered protocol family 2
67[ 0.123043] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
68[ 0.124353] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
69[ 0.125760] TCP: Hash tables configured (established 2048 bind 2048)
70[ 0.126978] TCP: reno registered
71[ 0.128714] UDP hash table entries: 256 (order: 1, 8192 bytes)
72[ 0.129239] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
73[ 0.130308] NET: Registered protocol family 1
74[ 0.131780] RPC: Registered named UNIX socket transport module.
75[ 0.132565] RPC: Registered udp transport module.
76[ 0.133693] RPC: Registered tcp transport module.
77[ 0.134811] RPC: Registered tcp NFSv4.1 backchannel transport module.
78[ 0.135787] PCI: CLS 64 bytes, default 32
79[ 0.136071] Trying to unpack rootfs image as initramfs...
80[ 1.321979] Freeing initrd memory: 6152k freed
81[ 1.330485] platform rtc_cmos: registered platform RTC device (no PNP device found)
82[ 1.332885] microcode: AMD CPU family 0x5 not supported
83[ 1.352328] NFS: Registering the id_resolver key type
84[ 1.353623] Key type id_resolver registered
85[ 1.354229] Key type id_legacy registered
86[ 1.355361] msgmni has been set to 480
87[ 1.358012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
88[ 1.359218] io scheduler noop registered
89[ 1.360007] io scheduler deadline registered
90[ 1.360879] io scheduler cfq registered (default)
91[ 1.496331] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
92[ 1.497795] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
93[ 1.499894] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
94[ 1.503962] Linux agpgart interface v0.103
95[ 1.518591] brd: module loaded
96[ 1.518941] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
97[ 1.521907] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
98[ 1.524899] cs5535-gpio cs5535-gpio: reserved resource region [io 0x1c00-0x1cff]
99[ 1.526706] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
100[ 1.530696] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
101[ 1.534699] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
102[ 1.538702] cs5535-mfd 0000:00:0f.0: 5 devices registered.
103[ 1.540372] Uniform Multi-Platform E-IDE driver
104[ 1.541380] ide-gd driver 1.18
105[ 1.543945] i8042: PNP: No PS/2 controller found. Probing ports directly.
106[ 1.548034] i8042: No controller found
107[ 1.549950] mousedev: PS/2 mouse device common for all mice
108[ 1.551254] cpuidle: using governor ladder
109[ 1.552659] cpuidle: using governor menu
110[ 1.555844] TCP: cubic registered
111[ 1.556831] NET: Registered protocol family 17
112[ 1.558320] Key type dns_resolver registered
113[ 1.559272] Using IPI No-Shortcut mode
114[ 1.563459] Freeing unused kernel memory: 404k freed
115[ 1.565226] Write protecting the kernel text: 2920k
116[ 1.566007] Write protecting the kernel read-only data: 964k
117[ 1.635860] udevd[900]: starting version 175
118[ 1.830323] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
119[ 1.876347] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management Adapter) at 0xfe029000, 00:0d:b9:15:6b:e0, IRQ 10
120[ 1.877748] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1
121[ 1.913299] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management Adapter) at 0xfe029100, 00:0d:b9:15:6b:e1, IRQ 11
122[ 1.914677] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
123[ 1.943041] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management Adapter) at 0xfe029200, 00:0d:b9:15:6b:e2, IRQ 9
124[ 1.945145] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
125[ 1.955700] amd74xx 0000:00:0f.2: UDMA100 controller
126[ 1.956645] amd74xx 0000:00:0f.2: IDE controller (0x1022:0x209a rev 0x01)
127[ 1.958171] amd74xx 0000:00:0f.2: IDE port disabled
128[ 1.958960] amd74xx 0000:00:0f.2: not 100% native mode: will probe irqs later
129[ 1.960505] ide0: BM-DMA at 0x24a0-0x24a7
130[ 1.960599] Probing IDE interface ide0...
131[ 1.998028] usbcore: registered new interface driver usbfs
132[ 2.030751] usbcore: registered new interface driver hub
133[ 2.046750] usbcore: registered new device driver usb
134[ 2.105785] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
135[ 2.140246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
136[ 2.320828] hda: HMS360404D5CF00, CFA DISK drive
137[ 2.331587] Switching to clocksource tsc
138[ 2.933581] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
139[ 3.477391] hda: UDMA/33 mode selected
140[ 3.676610] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
141[ 3.690961] hda: max request size: 128KiB
142[ 3.703022] hda: 7999488 sectors (4095 MB) w/128KiB Cache, CHS=7936/16/63
143[ 3.751696] hda: cache flushes supported
144[ 3.772963] hda: hda1
145[ 3.781951] ohci_hcd 0000:00:0f.4: setting latency timer to 64
146[ 3.781998] ohci_hcd 0000:00:0f.4: OHCI Host Controller
147[ 3.800687] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1
148[ 3.822965] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xfe026000
149[ 3.922304] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
150[ 3.942672] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
151[ 3.964320] usb usb1: Product: OHCI Host Controller
152[ 3.978954] usb usb1: Manufacturer: Linux 3.8.11-voyage ohci_hcd
153[ 3.996966] usb usb1: SerialNumber: 0000:00:0f.4
154[ 4.011900] hub 1-0:1.0: USB hub found
155[ 4.023214] hub 1-0:1.0: 4 ports detected
156[ 4.056167] Clocksource tsc unstable (delta = 224917111 ns)
157[ 4.074182] Switching to clocksource pit
158[ 4.090553] libata version 3.00 loaded.
159[ 9.953774] udevd[1128]: starting version 175
160[ 10.607681] AMD Geode RNG detected
161[ 10.811060] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x2400-0x243f]
162[ 10.812111] cs5535-mfgpt cs5535-mfgpt: 2 MFGPT timers available
163[ 10.877203] geode-aes: GEODE AES engine enabled.
164[ 10.932865] input: PC Speaker as /devices/platform/pcspkr/input/input0
165[ 11.013697] ehci-pci: EHCI PCI platform driver
166[ 11.015476] ehci-pci 0000:00:0f.5: setting latency timer to 64
167[ 11.015521] ehci-pci 0000:00:0f.5: EHCI Host Controller
168[ 11.018168] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 2
169[ 11.025441] ehci-pci 0000:00:0f.5: cache line size of 64 is not supported
170[ 11.025496] ehci-pci 0000:00:0f.5: irq 9, io mem 0xfe027000
171[ 11.037166] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
172[ 11.038832] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
173[ 11.039271] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
174[ 11.040944] usb usb2: Product: EHCI Host Controller
175[ 11.041606] usb usb2: Manufacturer: Linux 3.8.11-voyage ehci_hcd
176[ 11.042649] usb usb2: SerialNumber: 0000:00:0f.5
177[ 11.045771] hub 2-0:1.0: USB hub found
178[ 11.059565] hub 2-0:1.0: 4 ports detected
179[ 11.310709] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
180[ 11.622019] cfg80211: Calling CRDA to update world regulatory domain
181[ 12.404387] Error: Driver 'pcspkr' is already registered, aborting...
182[ 12.449960] ath5k 0000:00:0c.0: registered as 'phy0'
183[ 13.559721] ath: EEPROM regdomain: 0x61
184[ 13.559740] ath: EEPROM indicates we should expect a direct regpair map
185[ 13.559765] ath: Country alpha2 being used: 00
186[ 13.559778] ath: Regpair used: 0x61
187[ 13.707029] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
188[ 13.708507] ath5k: phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
189[ 13.708976] ath5k: phy0: RF5111 5GHz radio found (0x17)
190[ 13.709677] ath5k: phy0: RF2111 2GHz radio found (0x23)
191[ 14.127964] cfg80211: World regulatory domain updated:
192[ 14.129432] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
193[ 14.129964] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
194[ 14.131208] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
195[ 14.132451] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
196[ 14.132692] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
197[ 14.133942] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
198[ 14.965740] EXT2-fs (hda1): warning: mounting unchecked fs, running e2fsck is recommended
199[ 15.762642] cs5535-mfgpt cs5535-mfgpt: registered timer 0
200[ 22.273802] NET: Registered protocol family 10
201[ 87.005740] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
202[ 185.712784] EXT2-fs (hda1): warning: mounting unchecked fs, running e2fsck is recommended