blob: 4effc9f5a3c7b4531e559871f0d34c9308c49cec [file] [log] [blame]
Riku Viitanen8a495042023-12-28 21:25:30 +02001[ 0.000000] Linux version 6.6.7_1 (voidlinux@voidlinux) (gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP PREEMPT_DYNAMIC Thu Dec 14 14:52:33 UTC 2023
2[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.6.7_1 root=UUID=270f343d-2ca8-4228-8e99-ffc4cff13599 ro loglevel=4 iomem=relaxed
3[ 0.000000] reserving inaccessible SNB gfx pages
4[ 0.000000] BIOS-provided physical RAM map:
5[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
6[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
7[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
8[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
9[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
11[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff20fff] usable
13[ 0.000000] BIOS-e820: [mem 0x000000007ff21000-0x00000000829fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
15[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable
18[ 0.000000] NX (Execute Disable) protection: active
19[ 0.000000] APIC: Static calls initialized
20[ 0.000000] SMBIOS 3.0.0 present.
21[ 0.000000] DMI: HP HP Compaq 8200 Elite SFF PC/HP Compaq 8200 Elite SFF PC, BIOS 4.22-322-g9c1bf3c29aae 12/28/2023
22[ 0.000000] tsc: Fast TSC calibration using PIT
23[ 0.000000] tsc: Detected 3093.047 MHz processor
24[ 0.000637] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
25[ 0.000641] e820: remove [mem 0x000a0000-0x000fffff] usable
26[ 0.000647] last_pfn = 0x47d600 max_arch_pfn = 0x400000000
27[ 0.000652] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
28[ 0.000654] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
29[ 0.001433] last_pfn = 0x7ff21 max_arch_pfn = 0x400000000
30[ 0.012066] RAMDISK: [mem 0x2e483000-0x33238fff]
31[ 0.012072] ACPI: Early table checksum verification disabled
32[ 0.012076] ACPI: RSDP 0x00000000000F6210 000024 (v02 COREv4)
33[ 0.012081] ACPI: XSDT 0x000000007FF3C0E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
34[ 0.012087] ACPI: FACP 0x000000007FF3E680 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628)
35[ 0.012092] ACPI: DSDT 0x000000007FF3C280 0023F1 (v02 COREv4 COREBOOT 20141018 INTL 20230628)
36[ 0.012096] ACPI: FACS 0x000000007FF3C240 000040
37[ 0.012098] ACPI: FACS 0x000000007FF3C240 000040
38[ 0.012101] ACPI: SSDT 0x000000007FF3E7A0 0022EB (v02 COREv4 COREBOOT 00000000 CORE 20230628)
39[ 0.012104] ACPI: MCFG 0x000000007FF40A90 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628)
40[ 0.012107] ACPI: TCPA 0x000000007FF40AD0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20230628)
41[ 0.012110] ACPI: APIC 0x000000007FF40B10 000072 (v03 COREv4 COREBOOT 00000000 CORE 20230628)
42[ 0.012114] ACPI: SPCR 0x000000007FF40B90 000058 (v04 COREv4 COREBOOT 00000000 CORE 20230628)
43[ 0.012117] ACPI: DMAR 0x000000007FF40BF0 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
44[ 0.012120] ACPI: HPET 0x000000007FF40CB0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
45[ 0.012123] ACPI: Reserving FACP table memory at [mem 0x7ff3e680-0x7ff3e793]
46[ 0.012124] ACPI: Reserving DSDT table memory at [mem 0x7ff3c280-0x7ff3e670]
47[ 0.012125] ACPI: Reserving FACS table memory at [mem 0x7ff3c240-0x7ff3c27f]
48[ 0.012126] ACPI: Reserving FACS table memory at [mem 0x7ff3c240-0x7ff3c27f]
49[ 0.012127] ACPI: Reserving SSDT table memory at [mem 0x7ff3e7a0-0x7ff40a8a]
50[ 0.012128] ACPI: Reserving MCFG table memory at [mem 0x7ff40a90-0x7ff40acb]
51[ 0.012129] ACPI: Reserving TCPA table memory at [mem 0x7ff40ad0-0x7ff40b01]
52[ 0.012130] ACPI: Reserving APIC table memory at [mem 0x7ff40b10-0x7ff40b81]
53[ 0.012130] ACPI: Reserving SPCR table memory at [mem 0x7ff40b90-0x7ff40be7]
54[ 0.012131] ACPI: Reserving DMAR table memory at [mem 0x7ff40bf0-0x7ff40caf]
55[ 0.012132] ACPI: Reserving HPET table memory at [mem 0x7ff40cb0-0x7ff40ce7]
56[ 0.012183] No NUMA configuration found
57[ 0.012184] Faking a node at [mem 0x0000000000000000-0x000000047d5fffff]
58[ 0.012187] NODE_DATA(0) allocated [mem 0x47d5f2000-0x47d5f7fff]
59[ 0.012219] Zone ranges:
60[ 0.012221] DMA [mem 0x0000000000001000-0x0000000000ffffff]
61[ 0.012223] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
62[ 0.012224] Normal [mem 0x0000000100000000-0x000000047d5fffff]
63[ 0.012226] Device empty
64[ 0.012227] Movable zone start for each node
65[ 0.012228] Early memory node ranges
66[ 0.012228] node 0: [mem 0x0000000000001000-0x000000000009efff]
67[ 0.012230] node 0: [mem 0x0000000000100000-0x000000001fffffff]
68[ 0.012231] node 0: [mem 0x0000000020200000-0x000000003fffffff]
69[ 0.012232] node 0: [mem 0x0000000040200000-0x000000007ff20fff]
70[ 0.012233] node 0: [mem 0x0000000100000000-0x000000047d5fffff]
71[ 0.012235] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff]
72[ 0.012240] On node 0, zone DMA: 1 pages in unavailable ranges
73[ 0.012260] On node 0, zone DMA: 97 pages in unavailable ranges
74[ 0.013987] On node 0, zone DMA32: 512 pages in unavailable ranges
75[ 0.015948] On node 0, zone DMA32: 512 pages in unavailable ranges
76[ 0.043362] On node 0, zone Normal: 223 pages in unavailable ranges
77[ 0.043459] On node 0, zone Normal: 10752 pages in unavailable ranges
78[ 0.043474] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
79[ 0.043560] ACPI: PM-Timer IO Port: 0x508
80[ 0.043570] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
81[ 0.043581] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
82[ 0.043584] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
83[ 0.043586] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
84[ 0.043590] ACPI: Using ACPI (MADT) for SMP configuration information
85[ 0.043592] ACPI: HPET id: 0x8086a701 base: 0xfed00000
86[ 0.043597] ACPI: SPCR: console: uart,io,0x3f8
87[ 0.043599] TSC deadline timer available
88[ 0.043600] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
89[ 0.043612] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
90[ 0.043614] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
91[ 0.043615] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
92[ 0.043616] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
93[ 0.043617] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
94[ 0.043619] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff]
95[ 0.043620] PM: hibernation: Registered nosave memory: [mem 0x7ff21000-0x829fffff]
96[ 0.043621] PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
97[ 0.043622] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
98[ 0.043623] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
99[ 0.043623] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
100[ 0.043624] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
101[ 0.043625] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
102[ 0.043626] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]
103[ 0.043628] [mem 0x82a00000-0xefffffff] available for PCI devices
104[ 0.043629] Booting paravirtualized kernel on bare hardware
105[ 0.043632] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
106[ 0.049252] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
107[ 0.049592] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288
108[ 0.049598] pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152
109[ 0.049600] pcpu-alloc: [0] 0 1 2 3
110[ 0.049618] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.7_1 root=UUID=270f343d-2ca8-4228-8e99-ffc4cff13599 ro loglevel=4 iomem=relaxed
111[ 0.049675] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.6.7_1", will be passed to user space.
112[ 0.051624] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
113[ 0.052630] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
114[ 0.052713] Fallback order for Node 0: 0
115[ 0.052717] Built 1 zonelists, mobility grouping on. Total pages: 4116700
116[ 0.052718] Policy zone: Normal
117[ 0.053019] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
118[ 0.053028] software IO TLB: area num 4.
119[ 0.113150] Memory: 16248752K/16728828K available (16384K kernel code, 3306K rwdata, 11148K rodata, 3204K init, 3400K bss, 479816K reserved, 0K cma-reserved)
120[ 0.120989] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
121[ 0.121099] Kernel/User page tables isolation: enabled
122[ 0.121178] ftrace: allocating 43220 entries in 169 pages
123[ 0.128311] ftrace: allocated 169 pages with 4 groups
124[ 0.129006] Dynamic Preempt: voluntary
125[ 0.129150] rcu: Preemptible hierarchical RCU implementation.
126[ 0.129151] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
127[ 0.129152] Trampoline variant of Tasks RCU enabled.
128[ 0.129153] Rude variant of Tasks RCU enabled.
129[ 0.129153] Tracing variant of Tasks RCU enabled.
130[ 0.129154] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
131[ 0.129155] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
132[ 0.132470] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
133[ 0.132673] rcu: srcu_init: Setting srcu_struct sizes based on contention.
134[ 0.132791] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
135[ 0.132859] spurious 8259A interrupt: IRQ7.
136[ 0.132876] Console: colour dummy device 80x25
137[ 0.132879] printk: console [tty0] enabled
138[ 0.133261] ACPI: Core revision 20230628
139[ 0.133398] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
140[ 0.133414] APIC: Switch to symmetric I/O mode setup
141[ 0.133416] DMAR: Host address width 36
142[ 0.133417] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
143[ 0.133423] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
144[ 0.133425] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
145[ 0.133428] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
146[ 0.133430] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
147[ 0.133433] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
148[ 0.133434] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
149[ 0.133436] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
150[ 0.133945] DMAR-IR: Enabled IRQ remapping in x2apic mode
151[ 0.133948] x2apic enabled
152[ 0.134010] APIC: Switched APIC routing to: cluster x2apic
153[ 0.134475] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
154[ 0.139415] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c959faca19, max_idle_ns: 440795335388 ns
155[ 0.139421] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.09 BogoMIPS (lpj=3093047)
156[ 0.139446] CPU0: Thermal monitoring enabled (TM1)
157[ 0.139468] process: using mwait in idle threads
158[ 0.139471] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
159[ 0.139473] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
160[ 0.139476] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
161[ 0.139478] Spectre V2 : Mitigation: Retpolines
162[ 0.139479] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
163[ 0.139480] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
164[ 0.139481] Spectre V2 : Enabling Restricted Speculation for firmware calls
165[ 0.139482] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
166[ 0.139484] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
167[ 0.139487] MDS: Mitigation: Clear CPU buffers
168[ 0.139488] MMIO Stale Data: Unknown: No mitigations
169[ 0.139493] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
170[ 0.139494] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
171[ 0.139495] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
172[ 0.139497] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
173[ 0.139498] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
174[ 0.156748] Freeing SMP alternatives memory: 36K
175[ 0.156754] pid_max: default: 32768 minimum: 301
176[ 0.157436] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity
177[ 0.158535] landlock: Up and running.
178[ 0.158536] Yama: becoming mindful.
179[ 0.158792] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
180[ 0.158814] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
181[ 0.159494] smpboot: CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
182[ 0.159708] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
183[ 0.159742] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
184[ 0.159766] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
185[ 0.159789] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
186[ 0.159810] ... version: 3
187[ 0.159811] ... bit width: 48
188[ 0.159812] ... generic registers: 8
189[ 0.159813] ... value mask: 0000ffffffffffff
190[ 0.159814] ... max period: 00007fffffffffff
191[ 0.159815] ... fixed-purpose events: 3
192[ 0.159816] ... event mask: 00000007000000ff
193[ 0.159962] signal: max sigframe size: 1776
194[ 0.159980] Estimated ratio of average max frequency by base frequency (times 1024): 1057
195[ 0.160008] rcu: Hierarchical SRCU implementation.
196[ 0.160010] rcu: Max phase no-delay instances is 400.
197[ 0.160474] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
198[ 0.160548] smp: Bringing up secondary CPUs ...
199[ 0.160680] smpboot: x86: Booting SMP configuration:
200[ 0.160681] .... node #0, CPUs: #1 #2 #3
201[ 0.163476] smp: Brought up 1 node, 4 CPUs
202[ 0.163476] smpboot: Max logical packages: 1
203[ 0.163476] smpboot: Total of 4 processors activated (24744.37 BogoMIPS)
204[ 0.165048] devtmpfs: initialized
205[ 0.165048] x86/mm: Memory block size: 128MB
206[ 0.166757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
207[ 0.166757] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
208[ 0.166757] pinctrl core: initialized pinctrl subsystem
209[ 0.166757] PM: RTC time: 19:23:49, date: 2023-12-28
210[ 0.167722] NET: Registered PF_NETLINK/PF_ROUTE protocol family
211[ 0.167990] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
212[ 0.168152] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
213[ 0.168307] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
214[ 0.168334] audit: initializing netlink subsys (disabled)
215[ 0.168400] audit: type=2000 audit(1703791429.033:1): state=initialized audit_enabled=0 res=1
216[ 0.168547] thermal_sys: Registered thermal governor 'bang_bang'
217[ 0.168549] thermal_sys: Registered thermal governor 'step_wise'
218[ 0.168550] thermal_sys: Registered thermal governor 'user_space'
219[ 0.168551] thermal_sys: Registered thermal governor 'power_allocator'
220[ 0.168566] cpuidle: using governor ladder
221[ 0.168570] cpuidle: using governor menu
222[ 0.168622] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
223[ 0.168918] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
224[ 0.168923] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved as E820 entry
225[ 0.168932] PCI: Using configuration type 1 for base access
226[ 0.169006] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
227[ 0.169113] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
228[ 0.170519] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
229[ 0.170519] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
230[ 0.170655] ipmi:dmi: Base address is zero, assuming no IPMI interface
231[ 0.170655] fbcon: Taking over console
232[ 0.170655] ACPI: Added _OSI(Module Device)
233[ 0.170655] ACPI: Added _OSI(Processor Device)
234[ 0.170655] ACPI: Added _OSI(3.0 _SCP Extensions)
235[ 0.170655] ACPI: Added _OSI(Processor Aggregator Device)
236[ 0.171895] ACPI: 2 ACPI AML tables successfully acquired and loaded
237[ 0.194199] ACPI: _OSC evaluation for CPUs failed, trying _PDC
238[ 0.194199] ACPI: Interpreter enabled
239[ 0.194199] ACPI: PM: (supports S0 S1 S3 S4 S5)
240[ 0.194199] ACPI: Using IOAPIC for interrupt routing
241[ 0.194199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
242[ 0.194199] PCI: Ignoring E820 reservations for host bridge windows
243[ 0.194199] ACPI: Enabled 3 GPEs in block 00 to 3F
244[ 0.197535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
245[ 0.197541] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
246[ 0.197569] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
247[ 0.197576] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
248[ 0.197639] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c71ff])
249[ 0.197859] PCI host bridge to bus 0000:00
250[ 0.197861] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
251[ 0.197863] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
252[ 0.197865] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000c3fff window]
253[ 0.197867] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000fffff window]
254[ 0.197869] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
255[ 0.197870] pci_bus 0000:00: root bus resource [mem 0x47d600000-0xfffffffff window]
256[ 0.197871] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
257[ 0.197873] pci_bus 0000:00: root bus resource [bus 00-ff]
258[ 0.197889] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
259[ 0.197983] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
260[ 0.198014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
261[ 0.198087] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
262[ 0.198094] pci 0000:00:02.0: reg 0x10: [mem 0xfdc00000-0xfdffffff 64bit]
263[ 0.198100] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
264[ 0.198103] pci 0000:00:02.0: reg 0x20: [io 0xffc0-0xffff]
265[ 0.198114] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
266[ 0.198205] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
267[ 0.198219] pci 0000:00:19.0: reg 0x10: [mem 0xfdbe0000-0xfdbfffff]
268[ 0.198227] pci 0000:00:19.0: reg 0x14: [mem 0xfdbdb000-0xfdbdbfff]
269[ 0.198235] pci 0000:00:19.0: reg 0x18: [io 0xffa0-0xffbf]
270[ 0.198291] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
271[ 0.198355] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
272[ 0.198370] pci 0000:00:1a.0: reg 0x10: [mem 0xfdbd9000-0xfdbd93ff]
273[ 0.199451] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
274[ 0.199539] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
275[ 0.199556] pci 0000:00:1b.0: reg 0x10: [mem 0xfdbdc000-0xfdbdffff 64bit]
276[ 0.199630] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
277[ 0.199726] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
278[ 0.199743] pci 0000:00:1d.0: reg 0x10: [mem 0xfdbd8000-0xfdbd83ff]
279[ 0.199823] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
280[ 0.199908] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
281[ 0.199999] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
282[ 0.200202] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
283[ 0.200214] pci 0000:00:1f.2: reg 0x10: [io 0xff78-0xff7f]
284[ 0.200222] pci 0000:00:1f.2: reg 0x14: [io 0xff6c-0xff6f]
285[ 0.200229] pci 0000:00:1f.2: reg 0x18: [io 0xff70-0xff77]
286[ 0.200236] pci 0000:00:1f.2: reg 0x1c: [io 0xff68-0xff6b]
287[ 0.200244] pci 0000:00:1f.2: reg 0x20: [io 0xff80-0xff9f]
288[ 0.200250] pci 0000:00:1f.2: reg 0x24: [mem 0xfdbda000-0xfdbda7ff]
289[ 0.200289] pci 0000:00:1f.2: PME# supported from D3hot
290[ 0.200361] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
291[ 0.200377] pci 0000:00:1f.3: reg 0x10: [mem 0xfdbd7000-0xfdbd70ff 64bit]
292[ 0.200397] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
293[ 0.200491] pci 0000:00:01.0: PCI bridge to [bus 01]
294[ 0.200511] pci_bus 0000:02: extended config space not accessible
295[ 0.200557] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
296[ 0.200565] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
297[ 0.200567] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
298[ 0.200568] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000c3fff window] (subtractive decode)
299[ 0.200570] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000fffff window] (subtractive decode)
300[ 0.200571] pci 0000:00:1e.0: bridge window [mem 0x82a00000-0xefffffff window] (subtractive decode)
301[ 0.200572] pci 0000:00:1e.0: bridge window [mem 0x47d600000-0xfffffffff window] (subtractive decode)
302[ 0.200574] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
303[ 0.200707] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
304[ 0.200743] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
305[ 0.200777] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
306[ 0.200810] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
307[ 0.200843] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
308[ 0.200876] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
309[ 0.200909] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
310[ 0.200941] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
311[ 0.202004] iommu: Default domain type: Translated
312[ 0.202006] iommu: DMA domain TLB invalidation policy: lazy mode
313[ 0.202138] pps_core: LinuxPPS API ver. 1 registered
314[ 0.202139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
315[ 0.202142] PTP clock support registered
316[ 0.202150] EDAC MC: Ver: 3.0.0
317[ 0.202480] NetLabel: Initializing
318[ 0.202481] NetLabel: domain hash size = 128
319[ 0.202483] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
320[ 0.202498] NetLabel: unlabeled traffic allowed by default
321[ 0.202499] mctp: management component transport protocol core
322[ 0.202500] NET: Registered PF_MCTP protocol family
323[ 0.202504] PCI: Using ACPI for IRQ routing
324[ 0.203963] PCI: pci_cache_line_size set to 64 bytes
325[ 0.203967] pci 0000:00:02.0: can't claim BAR 0 [mem 0xfdc00000-0xfdffffff 64bit]: no compatible bridge window
326[ 0.203972] pci 0000:00:19.0: can't claim BAR 0 [mem 0xfdbe0000-0xfdbfffff]: no compatible bridge window
327[ 0.203974] pci 0000:00:19.0: can't claim BAR 1 [mem 0xfdbdb000-0xfdbdbfff]: no compatible bridge window
328[ 0.203978] pci 0000:00:1a.0: can't claim BAR 0 [mem 0xfdbd9000-0xfdbd93ff]: no compatible bridge window
329[ 0.203981] pci 0000:00:1b.0: can't claim BAR 0 [mem 0xfdbdc000-0xfdbdffff 64bit]: no compatible bridge window
330[ 0.203984] pci 0000:00:1d.0: can't claim BAR 0 [mem 0xfdbd8000-0xfdbd83ff]: no compatible bridge window
331[ 0.203990] pci 0000:00:1f.2: can't claim BAR 5 [mem 0xfdbda000-0xfdbda7ff]: no compatible bridge window
332[ 0.203993] pci 0000:00:1f.3: can't claim BAR 0 [mem 0xfdbd7000-0xfdbd70ff 64bit]: no compatible bridge window
333[ 0.204005] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
334[ 0.204007] e820: reserve RAM buffer [mem 0x7ff21000-0x7fffffff]
335[ 0.204009] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff]
336[ 0.204024] pci 0000:00:02.0: vgaarb: setting as boot VGA device
337[ 0.204024] pci 0000:00:02.0: vgaarb: bridge control possible
338[ 0.204024] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
339[ 0.204024] vgaarb: loaded
340[ 0.204024] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
341[ 0.204024] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
342[ 0.205446] clocksource: Switched to clocksource tsc-early
343[ 0.205981] VFS: Disk quotas dquot_6.6.0
344[ 0.206016] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
345[ 0.206109] pnp: PnP ACPI init
346[ 0.206184] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
347[ 0.206289] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
348[ 0.206292] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
349[ 0.206294] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
350[ 0.206295] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
351[ 0.206297] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
352[ 0.206299] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
353[ 0.206301] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
354[ 0.206303] system 00:01: [mem 0x20000000-0x201fffff] has been reserved
355[ 0.206304] system 00:01: [mem 0x40000000-0x401fffff] has been reserved
356[ 0.206445] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
357[ 0.206480] system 00:03: [io 0x0500-0x057f] has been reserved
358[ 0.206482] system 00:03: [io 0x0480-0x04bf] has been reserved
359[ 0.206792] system 00:07: [io 0x0600-0x0607] has been reserved
360[ 0.206794] system 00:07: [io 0x0610-0x061f] has been reserved
361[ 0.207092] system 00:0a: [io 0x0620-0x063f] has been reserved
362[ 0.207194] system 00:0b: [io 0x0800-0x08fe] has been reserved
363[ 0.207196] system 00:0b: [io 0x08ff] has been reserved
364[ 0.207362] system 00:0c: [io 0x0680-0x068f] has been reserved
365[ 0.207364] system 00:0c: [io 0x0690-0x069f] has been reserved
366[ 0.207471] system 00:0d: [io 0x0640-0x065f] has been reserved
367[ 0.207572] system 00:0e: [io 0x0660-0x067f] has been reserved
368[ 0.207615] pnp: PnP ACPI: found 16 devices
369[ 0.213527] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
370[ 0.213707] NET: Registered PF_INET protocol family
371[ 0.213881] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
372[ 0.217532] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
373[ 0.217565] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
374[ 0.217639] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
375[ 0.217899] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
376[ 0.218171] TCP: Hash tables configured (established 131072 bind 65536)
377[ 0.218311] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
378[ 0.218383] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
379[ 0.218445] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
380[ 0.218595] NET: Registered PF_UNIX/PF_LOCAL protocol family
381[ 0.218607] NET: Registered PF_XDP protocol family
382[ 0.218622] pci 0000:00:02.0: BAR 0: assigned [mem 0x47d800000-0x47dbfffff 64bit]
383[ 0.218629] pci 0000:00:19.0: BAR 0: assigned [mem 0x82a00000-0x82a1ffff]
384[ 0.218634] pci 0000:00:1b.0: BAR 0: assigned [mem 0x47d600000-0x47d603fff 64bit]
385[ 0.218643] pci 0000:00:19.0: BAR 1: assigned [mem 0x82a20000-0x82a20fff]
386[ 0.218647] pci 0000:00:1f.2: BAR 5: assigned [mem 0x82a21000-0x82a217ff]
387[ 0.218651] pci 0000:00:1a.0: BAR 0: assigned [mem 0x82a21800-0x82a21bff]
388[ 0.218656] pci 0000:00:1d.0: BAR 0: assigned [mem 0x82a21c00-0x82a21fff]
389[ 0.218660] pci 0000:00:1f.3: BAR 0: assigned [mem 0x47d604000-0x47d6040ff 64bit]
390[ 0.218669] pci 0000:00:01.0: PCI bridge to [bus 01]
391[ 0.218674] pci 0000:00:1e.0: PCI bridge to [bus 02]
392[ 0.218684] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
393[ 0.218686] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
394[ 0.218688] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000c3fff window]
395[ 0.218689] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000fffff window]
396[ 0.218690] pci_bus 0000:00: resource 8 [mem 0x82a00000-0xefffffff window]
397[ 0.218692] pci_bus 0000:00: resource 9 [mem 0x47d600000-0xfffffffff window]
398[ 0.218693] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window]
399[ 0.218695] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
400[ 0.218697] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
401[ 0.218698] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000c3fff window]
402[ 0.218699] pci_bus 0000:02: resource 7 [mem 0x000c8000-0x000fffff window]
403[ 0.218701] pci_bus 0000:02: resource 8 [mem 0x82a00000-0xefffffff window]
404[ 0.218702] pci_bus 0000:02: resource 9 [mem 0x47d600000-0xfffffffff window]
405[ 0.218703] pci_bus 0000:02: resource 10 [mem 0xfed40000-0xfed44fff window]
406[ 0.219120] PCI: CLS 64 bytes, default 64
407[ 0.219134] DMAR: No ATSR found
408[ 0.219135] DMAR: No SATC found
409[ 0.219137] DMAR: IOMMU feature pgsel_inv inconsistent
410[ 0.219138] DMAR: IOMMU feature pass_through inconsistent
411[ 0.219139] DMAR: dmar0: Using Queued invalidation
412[ 0.219144] DMAR: dmar1: Using Queued invalidation
413[ 0.219187] Trying to unpack rootfs image as initramfs...
414[ 0.285049] pci 0000:00:02.0: Adding to iommu group 0
415[ 0.285562] pci 0000:00:00.0: Adding to iommu group 1
416[ 0.285575] pci 0000:00:01.0: Adding to iommu group 2
417[ 0.285583] pci 0000:00:19.0: Adding to iommu group 3
418[ 0.285591] pci 0000:00:1a.0: Adding to iommu group 4
419[ 0.285604] pci 0000:00:1b.0: Adding to iommu group 5
420[ 0.285612] pci 0000:00:1d.0: Adding to iommu group 6
421[ 0.285619] pci 0000:00:1e.0: Adding to iommu group 7
422[ 0.285634] pci 0000:00:1f.0: Adding to iommu group 8
423[ 0.285644] pci 0000:00:1f.2: Adding to iommu group 8
424[ 0.285652] pci 0000:00:1f.3: Adding to iommu group 8
425[ 0.286396] DMAR: Intel(R) Virtualization Technology for Directed I/O
426[ 0.286398] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
427[ 0.286399] software IO TLB: mapped [mem 0x000000007bf21000-0x000000007ff21000] (64MB)
428[ 0.286769] Initialise system trusted keyrings
429[ 0.286820] workingset: timestamp_bits=40 max_order=22 bucket_order=0
430[ 0.286829] zbud: loaded
431[ 0.295918] Key type asymmetric registered
432[ 0.295921] Asymmetric key parser 'x509' registered
433[ 0.295940] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
434[ 0.295980] io scheduler mq-deadline registered
435[ 0.295981] io scheduler kyber registered
436[ 0.296016] io scheduler bfq registered
437[ 0.297730] pcieport 0000:00:01.0: PME: Signaling with IRQ 26
438[ 0.297814] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
439[ 0.297833] efifb: probing for efifb
440[ 0.297843] efifb: No BGRT, not showing boot graphics
441[ 0.297844] efifb: framebuffer at 0xa0000, using 64k, total 64k
442[ 0.297846] efifb: mode is 640x480x1, linelength=80, pages=1
443[ 0.297847] efifb: scrolling: redraw
444[ 0.297848] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
445[ 0.297936] Console: switching to colour frame buffer device 80x30
446[ 0.300004] fb0: EFI VGA frame buffer device
447[ 0.301028] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
448[ 0.321720] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
449[ 0.323054] e1000e: Intel(R) PRO/1000 Network Driver
450[ 0.323056] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
451[ 0.323185] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
452[ 0.431388] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
453[ 0.529986] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 6e:10:39:1a:0b:03
454[ 0.529993] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
455[ 0.530031] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
456[ 0.530136] i8042: PNP: PS/2 Controller [PNP0303:L060,PNP0f03:L050] at 0x60,0x64 irq 1,12
457[ 0.533215] serio: i8042 KBD port at 0x60,0x64 irq 1
458[ 0.533223] serio: i8042 AUX port at 0x60,0x64 irq 12
459[ 0.533388] mousedev: PS/2 mouse device common for all mice
460[ 0.533439] rtc_cmos 00:04: RTC can wake from S4
461[ 0.533744] rtc_cmos 00:04: registered as rtc0
462[ 0.533776] rtc_cmos 00:04: setting system clock to 2023-12-28T19:23:49 UTC (1703791429)
463[ 0.533806] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram
464[ 0.534190] intel_pstate: Intel P-state driver initializing
465[ 0.534504] ledtrig-cpu: registered to indicate activity on CPUs
466[ 0.545938] NET: Registered PF_INET6 protocol family
467[ 0.815151] Freeing initrd memory: 79576K
468[ 0.819902] Segment Routing with IPv6
469[ 0.819905] RPL Segment Routing with IPv6
470[ 0.819924] In-situ OAM (IOAM) with IPv6
471[ 0.819959] NET: Registered PF_PACKET protocol family
472[ 0.820372] microcode: Microcode Update Driver: v2.2.
473[ 0.820378] IPI shorthand broadcast: enabled
474[ 0.821965] sched_clock: Marking stable (819703560, 1716375)->(828332027, -6912092)
475[ 0.822208] registered taskstats version 1
476[ 0.822384] Loading compiled-in X.509 certificates
477[ 0.825011] Loaded X.509 cert 'Build time autogenerated kernel key: b87bd5d84158522151f9811b69ecc5f5d45e3d07'
478[ 0.826979] Key type .fscrypt registered
479[ 0.826982] Key type fscrypt-provisioning registered
480[ 0.827286] PM: Magic number: 3:980:395
481[ 0.827500] clk: Disabling unused clocks
482[ 0.828962] Freeing unused decrypted memory: 2028K
483[ 0.829351] Freeing unused kernel image (initmem) memory: 3204K
484[ 0.838471] Write protecting the kernel read-only data: 28672k
485[ 0.839032] Freeing unused kernel image (rodata/data gap) memory: 1140K
486[ 0.880118] x86/mm: Checked W+X mappings: passed, no W+X pages found.
487[ 0.880120] x86/mm: Checking user space page tables
488[ 0.919338] x86/mm: Checked W+X mappings: passed, no W+X pages found.
489[ 0.919357] Run /init as init process
490[ 0.919359] with arguments:
491[ 0.919360] /init
492[ 0.919361] with environment:
493[ 0.919362] HOME=/
494[ 0.919362] TERM=linux
495[ 0.919363] BOOT_IMAGE=/boot/vmlinuz-6.6.7_1
496[ 1.000430] raid6: sse2x4 gen() 14047 MB/s
497[ 1.017424] raid6: sse2x2 gen() 15648 MB/s
498[ 1.034425] raid6: sse2x1 gen() 12172 MB/s
499[ 1.034426] raid6: using algorithm sse2x2 gen() 15648 MB/s
500[ 1.051429] raid6: .... xor() 8850 MB/s, rmw enabled
501[ 1.051430] raid6: using ssse3x2 recovery algorithm
502[ 1.052859] xor: automatically using best checksumming function avx
503[ 1.190675] Btrfs loaded, zoned=yes, fsverity=no
504[ 1.301041] device-mapper: uevent: version 1.0.3
505[ 1.301123] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
506[ 1.318487] systemd-udevd[268]: starting version 3.2.12
507[ 1.318767] tsc: Refined TSC clocksource calibration: 3092.973 MHz
508[ 1.318775] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
509[ 1.318875] clocksource: Switched to clocksource tsc
510[ 1.575729] random: crng init done
511[ 1.577014] udevd[269]: starting eudev-3.2.12
512[ 1.599466] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
513[ 1.603103] ACPI: button: Power Button [PWRF]
514[ 1.604180] e1000e 0000:00:19.0 enp0s25: renamed from eth0
515[ 1.606651] Linux agpgart interface v0.103
516[ 1.621237] cryptd: max_cpu_qlen set to 1000
517[ 1.627580] AVX version of gcm_enc/dec engaged.
518[ 1.627605] AES CTR mode by8 optimization enabled
519[ 1.643025] SCSI subsystem initialized
520[ 1.664668] ACPI: bus type drm_connector registered
521[ 1.672386] ACPI: bus type USB registered
522[ 1.672424] usbcore: registered new interface driver usbfs
523[ 1.672434] usbcore: registered new interface driver hub
524[ 1.672446] usbcore: registered new device driver usb
525[ 1.682872] libata version 3.00 loaded.
526[ 1.685204] ehci-pci 0000:00:1a.0: EHCI Host Controller
527[ 1.685216] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
528[ 1.685229] ehci-pci 0000:00:1a.0: debug port 2
529[ 1.689245] ehci-pci 0000:00:1a.0: irq 19, io mem 0x82a21800
530[ 1.695747] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
531[ 1.695825] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
532[ 1.695828] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
533[ 1.695830] usb usb1: Product: EHCI Host Controller
534[ 1.695831] usb usb1: Manufacturer: Linux 6.6.7_1 ehci_hcd
535[ 1.695832] usb usb1: SerialNumber: 0000:00:1a.0
536[ 1.696036] hub 1-0:1.0: USB hub found
537[ 1.696046] hub 1-0:1.0: 3 ports detected
538[ 1.696224] ehci-pci 0000:00:1d.0: EHCI Host Controller
539[ 1.696233] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
540[ 1.696246] ehci-pci 0000:00:1d.0: debug port 2
541[ 1.700180] ehci-pci 0000:00:1d.0: irq 18, io mem 0x82a21c00
542[ 1.706780] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
543[ 1.706844] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
544[ 1.706847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
545[ 1.706849] usb usb2: Product: EHCI Host Controller
546[ 1.706850] usb usb2: Manufacturer: Linux 6.6.7_1 ehci_hcd
547[ 1.706851] usb usb2: SerialNumber: 0000:00:1d.0
548[ 1.707040] hub 2-0:1.0: USB hub found
549[ 1.707047] hub 2-0:1.0: 3 ports detected
550[ 1.709169] ahci 0000:00:1f.2: version 3.0
551[ 1.709319] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
552[ 1.719411] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
553[ 1.719417] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
554[ 1.720090] scsi host0: ahci
555[ 1.720329] scsi host1: ahci
556[ 1.720486] scsi host2: ahci
557[ 1.720639] scsi host3: ahci
558[ 1.720854] scsi host4: ahci
559[ 1.720978] scsi host5: ahci
560[ 1.721027] ata1: SATA max UDMA/133 abar m2048@0x82a21000 port 0x82a21100 irq 28
561[ 1.721031] ata2: SATA max UDMA/133 abar m2048@0x82a21000 port 0x82a21180 irq 28
562[ 1.721034] ata3: SATA max UDMA/133 abar m2048@0x82a21000 port 0x82a21200 irq 28
563[ 1.721036] ata4: SATA max UDMA/133 abar m2048@0x82a21000 port 0x82a21280 irq 28
564[ 1.721037] ata5: DUMMY
565[ 1.721038] ata6: DUMMY
566[ 1.936775] usb 1-1: new high-speed USB device number 2 using ehci-pci
567[ 1.944772] usb 2-1: new high-speed USB device number 2 using ehci-pci
568[ 2.028686] ata1: SATA link down (SStatus 0 SControl 300)
569[ 2.065235] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
570[ 2.065244] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
571[ 2.065670] hub 1-1:1.0: USB hub found
572[ 2.065828] hub 1-1:1.0: 6 ports detected
573[ 2.073497] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
574[ 2.073506] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
575[ 2.073916] hub 2-1:1.0: USB hub found
576[ 2.074094] hub 2-1:1.0: 8 ports detected
577[ 2.340684] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
578[ 2.343533] ata2.00: ATAPI: HL-DT-STDVD-RAM GH10N, EX02, max UDMA/100
579[ 2.347368] ata2.00: configured for UDMA/100
580[ 2.350771] usb 2-1.6: new low-speed USB device number 3 using ehci-pci
581[ 2.436588] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=1125, bcdDevice= 0.70
582[ 2.436597] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
583[ 2.436601] usb 2-1.6: Product: Asus Keyboard
584[ 2.436603] usb 2-1.6: Manufacturer: CHICONY
585[ 2.446783] hid: raw HID events driver (C) Jiri Kosina
586[ 2.464779] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH10N EX02 PQ: 0 ANSI: 5
587[ 2.512774] usb 2-1.8: new high-speed USB device number 4 using ehci-pci
588[ 2.666107] usb 2-1.8: New USB device found, idVendor=0951, idProduct=1697, bcdDevice= 1.00
589[ 2.666117] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
590[ 2.666121] usb 2-1.8: Product: DT Ultimate G3
591[ 2.666123] usb 2-1.8: Manufacturer: Kingston
592[ 2.666125] usb 2-1.8: SerialNumber: 0018F30C9F8ABF10F1ADF78F
593[ 2.673748] usb-storage 2-1.8:1.0: USB Mass Storage device detected
594[ 2.674253] scsi host6: usb-storage 2-1.8:1.0
595[ 2.674394] usbcore: registered new interface driver usb-storage
596[ 2.788744] ata3: SATA link down (SStatus 0 SControl 300)
597[ 3.100739] ata4: SATA link down (SStatus 0 SControl 300)
598[ 3.107160] usbcore: registered new interface driver uas
599[ 3.113714] usbcore: registered new interface driver usbhid
600[ 3.113722] usbhid: USB HID core driver
601[ 3.125969] asus_wmi: ASUS WMI generic driver loaded
602[ 3.127912] input: CHICONY Asus Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:04F2:1125.0001/input/input3
603[ 3.179918] asus 0003:04F2:1125.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY Asus Keyboard] on usb-0000:00:1d.0-1.6/input0
604[ 3.180141] input: CHICONY Asus Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:04F2:1125.0002/input/input4
605[ 3.231922] asus 0003:04F2:1125.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY Asus Keyboard] on usb-0000:00:1d.0-1.6/input1
606[ 3.631435] i915 0000:00:02.0: [drm] Disabling ppGTT for VT-d support
607[ 3.631769] i915 0000:00:02.0: [drm] VT-d active for gfx access
608[ 3.631908] Console: switching to colour dummy device 80x25
609[ 3.631953] i915 0000:00:02.0: vgaarb: deactivate vga console
610[ 3.631982] i915 0000:00:02.0: [drm] Using Transparent Hugepages
611[ 3.631985] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory
612[ 3.637149] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
613[ 3.637161] cdrom: Uniform CD-ROM driver Revision: 3.20
614[ 3.682921] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
615[ 3.688010] scsi 6:0:0:0: Direct-Access Kingston DT Ultimate G3 PMAP PQ: 0 ANSI: 6
616[ 3.700605] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
617[ 3.727598] fbcon: i915drmfb (fb0) is primary device
618[ 3.753562] sr 1:0:0:0: Attached scsi CD-ROM sr0
619[ 3.754542] sd 6:0:0:0: [sda] 61472768 512-byte logical blocks: (31.5 GB/29.3 GiB)
620[ 3.755824] sd 6:0:0:0: [sda] Write Protect is off
621[ 3.755827] sd 6:0:0:0: [sda] Mode Sense: 2b 00 00 08
622[ 3.757076] sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
623[ 3.839169] Console: switching to colour frame buffer device 240x67
624[ 3.859600] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
625[ 3.875876] sda: sda1 sda2 sda3
626[ 3.876151] sd 6:0:0:0: [sda] Attached SCSI removable disk
627[ 6.557521] EXT4-fs (sda3): orphan cleanup on readonly fs
628[ 6.557881] EXT4-fs (sda3): mounted filesystem 270f343d-2ca8-4228-8e99-ffc4cff13599 ro with ordered data mode. Quota mode: none.
629[ 6.600143] EXT4-fs (sda3): unmounting filesystem 270f343d-2ca8-4228-8e99-ffc4cff13599.
630[ 6.620561] dracut: Checking ext4: /dev/sda3
631[ 6.620697] dracut: issuing e2fsck -a /dev/sda3
632[ 6.639293] dracut: VOID: clean, 352975/1921360 files, 5404035/7682304 blocks
633[ 6.641782] dracut: Mounting /dev/disk/by-uuid/270f343d-2ca8-4228-8e99-ffc4cff13599 with -o noatime,rw,commit=30,data=ordered,ro
634[ 6.898415] EXT4-fs (sda3): orphan cleanup on readonly fs
635[ 6.898896] EXT4-fs (sda3): mounted filesystem 270f343d-2ca8-4228-8e99-ffc4cff13599 ro with ordered data mode. Quota mode: none.
636[ 6.967227] dracut: Mounted root filesystem /dev/sda3
637[ 7.068482] dracut: Switching root
638[ 7.452898] fuse: init (API version 7.39)
639[ 7.491286] Non-volatile memory driver v1.3
640[ 7.502518] loop: module loaded
641[ 7.522943] tun: Universal TUN/TAP device driver, 1.6
642[ 7.534679] PPP generic driver version 2.4.2
643[ 7.583142] VFIO - User Level meta-driver version: 0.3
644[ 7.688208] Bluetooth: Core ver 2.22
645[ 7.688222] NET: Registered PF_BLUETOOTH protocol family
646[ 7.688224] Bluetooth: HCI device and connection manager initialized
647[ 7.688228] Bluetooth: HCI socket layer initialized
648[ 7.688230] Bluetooth: L2CAP socket layer initialized
649[ 7.688233] Bluetooth: SCO socket layer initialized
650[ 7.716994] NET: Registered PF_VSOCK protocol family
651[ 7.854841] udevd[597]: starting version 3.2.12
652[ 7.940921] udevd[598]: starting eudev-3.2.12
653[ 8.113755] tpm_tis 00:0f: 1.2 TPM (device-id 0xB, rev-id 16)
654[ 8.121464] parport_pc 00:05: reported by Plug and Play ACPI
655[ 8.121548] parport0: PC-style at 0x378, irq 7 [PCSPP]
656[ 8.122501] input: PC Speaker as /devices/platform/pcspkr/input/input6
657[ 8.147825] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20230628/utaddress-204)
658[ 8.147834] ACPI: OSL: Resource conflict; ACPI support missing from driver?
659[ 8.147837] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230628/utaddress-204)
660[ 8.147840] ACPI: OSL: Resource conflict; ACPI support missing from driver?
661[ 8.147841] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230628/utaddress-204)
662[ 8.147843] ACPI: OSL: Resource conflict; ACPI support missing from driver?
663[ 8.147844] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230628/utaddress-204)
664[ 8.147848] ACPI: OSL: Resource conflict; ACPI support missing from driver?
665[ 8.147849] lpc_ich: Resource conflict(s) found affecting gpio_ich
666[ 8.185344] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
667[ 8.185492] i2c i2c-7: 4/4 memory slots populated (from DMI)
668[ 8.185795] i2c i2c-7: Successfully instantiated SPD at 0x50
669[ 8.186393] i2c i2c-7: Successfully instantiated SPD at 0x51
670[ 8.186686] i2c i2c-7: Successfully instantiated SPD at 0x52
671[ 8.186976] i2c i2c-7: Successfully instantiated SPD at 0x53
672[ 8.214579] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
673[ 8.214583] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
674[ 8.214585] RAPL PMU: hw unit of domain package 2^-16 Joules
675[ 8.214585] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
676[ 8.299847] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
677[ 8.384083] at24 7-0050: supply vcc not found, using dummy regulator
678[ 8.384164] ppdev: user-space parallel port driver
679[ 8.384174] iTCO_vendor_support: vendor-support=0
680[ 8.384708] at24 7-0050: 256 byte spd EEPROM, read-only
681[ 8.384739] at24 7-0051: supply vcc not found, using dummy regulator
682[ 8.385463] at24 7-0051: 256 byte spd EEPROM, read-only
683[ 8.385486] at24 7-0052: supply vcc not found, using dummy regulator
684[ 8.386018] at24 7-0052: 256 byte spd EEPROM, read-only
685[ 8.386038] at24 7-0053: supply vcc not found, using dummy regulator
686[ 8.386569] at24 7-0053: 256 byte spd EEPROM, read-only
687[ 8.421491] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
688[ 8.422279] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
689[ 8.423447] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
690[ 8.423452] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
691[ 8.423454] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
692[ 8.423456] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
693[ 8.423457] snd_hda_codec_realtek hdaudioC0D0: inputs:
694[ 8.423458] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
695[ 8.423459] snd_hda_codec_realtek hdaudioC0D0: Line=0x18
696[ 8.450298] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
697[ 8.450460] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
698[ 8.450503] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
699[ 8.450662] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
700[ 8.450706] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
701[ 8.536998] intel_rapl_common: Found RAPL domain package
702[ 8.537002] intel_rapl_common: Found RAPL domain core
703[ 8.537003] intel_rapl_common: Found RAPL domain uncore
704[ 8.897738] cfg80211: Loading compiled-in X.509 certificates for regulatory database
705[ 8.900019] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
706[ 9.866999] EXT4-fs (sda3): re-mounted 270f343d-2ca8-4228-8e99-ffc4cff13599 ro. Quota mode: none.
707[ 10.048844] EXT4-fs (sda3): re-mounted 270f343d-2ca8-4228-8e99-ffc4cff13599 r/w. Quota mode: none.
708[ 10.281772] udevd[3672]: starting version 3.2.12
709[ 10.284093] udevd[3672]: starting eudev-3.2.12
710[ 10.688085] 8021q: 802.1Q VLAN Support v1.8
711[ 13.954759] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx