Gitiles
Code Review Sign In
review.coreboot.org / board-status / 7fa6eb5147c75a332644da295b0f2f2072ee5157 / . / pcengines / alix1c / 4.6-1491-g612ec0e / 2017-09-17T21_31_22Z / kernel_log.txt
blob: 96c8bf25770f45942d957b452c0df5a0049974a4 [file] [log] [blame]
konopskyyyyb2465742017-09-18 11:36:57 +0200[diff] [blame]1[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
2[ 0.000000] CPU 0 irqstacks, hard=ce806000 soft=ce808000
3[ 0.000000] Console: colour dummy device 80x25
4[ 0.000000] console [ttyS0] enabled
5[ 0.000000] tsc: Fast TSC calibration using PIT
6[ 0.000000] tsc: Detected 498.044 MHz processor
7[ 0.003008] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.08 BogoMIPS (lpj=498044)
8[ 0.005013] pid_max: default: 32768 minimum: 301
9[ 0.007178] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
10[ 0.008018] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
11[ 0.010847] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
12[ 0.010847] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
13[ 0.010847] tlb_flushall_shift: -1
14[ 0.019918] Freeing SMP alternatives memory: 20K (c1493000 - c1498000)
15[ 0.020245] smpboot: weird, boot CPU (#0) not listed by the BIOS
16[ 0.021013] smpboot: SMP motherboard not detected
17[ 0.022012] smpboot: Local APIC not detected. Using dummy APIC emulation.
18[ 0.023009] smpboot: SMP disabled
19[ 0.024032] Performance Events: no PMU driver, software events only.
20[ 0.027105] x86: Booted up 1 node, 1 CPUs
21[ 0.028014] smpboot: Total of 1 processors activated (996.08 BogoMIPS)
22[ 0.030483] devtmpfs: initialized
23[ 0.033926] NET: Registered protocol family 16
24[ 0.036810] cpuidle: using governor ladder
25[ 0.037043] cpuidle: using governor menu
26[ 0.040332] PCI: PCI BIOS revision 2.10 entry at 0xfd4d9, last bus=0
27[ 0.041023] PCI: Using configuration type 1 for base access
28[ 0.064474] bio: create slab <bio-0> at 0
29[ 0.066362] ACPI: Interpreter disabled.
30[ 0.067679] vgaarb: loaded
31[ 0.069574] SCSI subsystem initialized
32[ 0.071549] PCI: Probing PCI hardware
33[ 0.072052] PCI: root bus 00: using default resources
34[ 0.072066] PCI: Probing PCI hardware (bus 00)
35[ 0.072362] PCI host bridge to bus 0000:00
36[ 0.073041] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
37[ 0.074023] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
38[ 0.075036] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
39[ 0.077104] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
40[ 0.077246] pci 0000:00:01.0: reg 0x10: [io 0xac1c-0xac1f]
41[ 0.078455] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
42[ 0.078734] pci 0000:00:01.1: reg 0x10: [mem 0xfd000000-0xfdffffff]
43[ 0.078931] pci 0000:00:01.1: reg 0x14: [mem 0xfe000000-0xfe003fff]
44[ 0.079164] pci 0000:00:01.1: reg 0x18: [mem 0xfe004000-0xfe007fff]
45[ 0.079362] pci 0000:00:01.1: reg 0x1c: [mem 0xfe008000-0xfe00bfff]
46[ 0.079559] pci 0000:00:01.1: reg 0x20: [mem 0xfe00c000-0xfe00ffff]
47[ 0.080357] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=mem,locks=none
48[ 0.081313] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
49[ 0.081559] pci 0000:00:01.2: reg 0x10: [mem 0xfe010000-0xfe013fff]
50[ 0.083436] pci 0000:00:0d.0: [1106:3053] type 00 class 0x020000
51[ 0.083481] pci 0000:00:0d.0: reg 0x10: [io 0x1000-0x10ff]
52[ 0.083513] pci 0000:00:0d.0: reg 0x14: [mem 0xfe019000-0xfe0190ff]
53[ 0.083615] pci 0000:00:0d.0: supports D1 D2
54[ 0.083636] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
55[ 0.084218] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
56[ 0.084536] pci 0000:00:0f.0: reg 0x10: [io 0x1cb0-0x1cb7]
57[ 0.084801] pci 0000:00:0f.0: reg 0x14: [io 0x1400-0x14ff]
58[ 0.085096] pci 0000:00:0f.0: reg 0x18: [io 0x1c00-0x1c3f]
59[ 0.085361] pci 0000:00:0f.0: reg 0x1c: [io 0x1c80-0x1c9f]
60[ 0.085632] pci 0000:00:0f.0: reg 0x20: [io 0x1800-0x187f]
61[ 0.085914] pci 0000:00:0f.0: reg 0x24: [io 0x1c40-0x1c7f]
62[ 0.086830] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
63[ 0.087830] pci 0000:00:0f.2: reg 0x20: [io 0x1ca0-0x1caf]
64[ 0.088852] pci 0000:00:0f.3: [1022:2093] type 00 class 0x040100
65[ 0.089160] pci 0000:00:0f.3: reg 0x10: [io 0x1880-0x18ff]
66[ 0.090829] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
67[ 0.091239] pci 0000:00:0f.4: reg 0x10: [mem 0xfe016000-0xfe016fff]
68[ 0.092759] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
69[ 0.093555] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
70[ 0.093898] pci 0000:00:0f.5: reg 0x10: [mem 0xfe017000-0xfe017fff]
71[ 0.095450] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
72[ 0.096144] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
73[ 0.096723] PCI: pci_cache_line_size set to 32 bytes
74[ 0.097167] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
75[ 0.097185] e820: reserve RAM buffer [mem 0x0f7b3000-0x0fffffff]
76[ 0.098671] Switched to clocksource pit
77[ 0.099536] pnp: PnP ACPI: disabled
78[ 0.124652] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
79[ 0.124680] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
80[ 0.124829] NET: Registered protocol family 2
81[ 0.127278] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
82[ 0.128430] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
83[ 0.129979] TCP: Hash tables configured (established 2048 bind 2048)
84[ 0.130538] TCP: reno registered
85[ 0.131832] UDP hash table entries: 256 (order: 1, 8192 bytes)
86[ 0.132733] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
87[ 0.134392] NET: Registered protocol family 1
88[ 0.136138] RPC: Registered named UNIX socket transport module.
89[ 0.137114] RPC: Registered udp transport module.
90[ 0.137867] RPC: Registered tcp transport module.
91[ 0.138618] RPC: Registered tcp NFSv4.1 backchannel transport module.
92[ 0.140201] pci 0000:00:01.1: Boot video device
93[ 0.140996] PCI: CLS 64 bytes, default 32
94[ 0.141265] Trying to unpack rootfs image as initramfs...
95[ 1.371892] Freeing initrd memory: 6352K (cf16f000 - cf7a3000)
96[ 1.373248] platform rtc_cmos: registered platform RTC device (no PNP device found)
97[ 1.375290] microcode: AMD CPU family 0x5 not supported
98[ 1.394605] futex hash table entries: 256 (order: 2, 16384 bytes)
99[ 1.398033] NFS: Registering the id_resolver key type
100[ 1.399307] Key type id_resolver registered
101[ 1.400560] Key type id_legacy registered
102[ 1.401680] msgmni has been set to 480
103[ 1.403750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
104[ 1.404204] io scheduler noop registered
105[ 1.405177] io scheduler deadline registered
106[ 1.406531] io scheduler cfq registered (default)
107[ 1.557602] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
108[ 1.560289] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
109[ 1.563390] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
110[ 1.566276] Linux agpgart interface v0.103
111[ 1.584513] brd: module loaded
112[ 1.585844] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285)
113[ 1.588822] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285)
114[ 1.592826] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285)
115[ 1.595779] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285)
116[ 1.599784] ACPI Exception: AE_BAD_PARAMETER, Thread 3464665312 could not acquire Mutex [0x1] (20131218/utmutex-285)
117[ 1.603788] cs5535-mfd 0000:00:0f.0: 5 devices registered.
118[ 1.605748] i8042: PNP: No PS/2 controller found. Probing ports directly.
119[ 1.609430] serio: i8042 KBD port at 0x60,0x64 irq 1
120[ 1.610488] serio: i8042 AUX port at 0x60,0x64 irq 12
121[ 1.613196] mousedev: PS/2 mouse device common for all mice
122[ 1.615795] Loading driver leds-apu (v0.1).
123[ 1.617050] ledtrig-cpu: registered to indicate activity on CPUs
124[ 1.618561] hidraw: raw HID events driver (C) Jiri Kosina
125[ 1.620633] TCP: cubic registered
126[ 1.622032] NET: Registered protocol family 17
127[ 1.622706] Key type dns_resolver registered
128[ 1.624143] Using IPI No-Shortcut mode
129[ 1.628033] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
130[ 1.629165] spurious 8259A interrupt: IRQ7.
131[ 1.629696] Freeing unused kernel memory: 384K (c1433000 - c1493000)
132[ 1.630774] Write protecting the kernel text: 3068k
133[ 1.631985] Write protecting the kernel read-only data: 1012k
134[ 1.700637] udevd[902]: starting version 175
135[ 1.919504] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
136[ 1.973180] via-rhine 0000:00:0d.0 eth0: VIA Rhine III (Management Adapter) at 0xfe019000, 00:0d:b9:0f:3d:60, IRQ 10
137[ 1.975714] via-rhine 0000:00:0d.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1
138[ 2.020312] libata version 3.00 loaded.
139[ 2.022786] pata_amd 0000:00:0f.2: version 0.4.1
140[ 2.037923] usbcore: registered new interface driver usbfs
141[ 2.049636] usbcore: registered new interface driver hub
142[ 2.056638] usbcore: registered new device driver usb
143[ 2.061014] scsi0 : pata_amd
144[ 2.072563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
145[ 2.083173] scsi1 : pata_amd
146[ 2.084587] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1ca0 irq 14
147[ 2.085721] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1ca8 irq 15
148[ 2.117169] ehci-pci: EHCI PCI platform driver
149[ 2.136477] ehci-pci 0000:00:0f.5: EHCI Host Controller
150[ 2.168170] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
151[ 2.197436] ehci-pci 0000:00:0f.5: cache line size of 64 is not supported
152[ 2.197493] ehci-pci 0000:00:0f.5: irq 9, io mem 0xfe017000
153[ 2.220152] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
154[ 2.222314] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
155[ 2.223278] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
156[ 2.224692] usb usb1: Product: EHCI Host Controller
157[ 2.225741] usb usb1: Manufacturer: Linux 3.14.12-voyage ehci_hcd
158[ 2.226948] usb usb1: SerialNumber: 0000:00:0f.5
159[ 2.240987] hub 1-0:1.0: USB hub found
160[ 2.242282] ata1.00: CFA: CF 2GB, 20110221, max UDMA/66
161[ 2.243629] ata1.00: 3931200 sectors, multi 0: LBA
162[ 2.248375] ata1.00: configured for UDMA/66
163[ 2.250256] scsi 0:0:0:0: Direct-Access ATA CF 2GB 2011 PQ: 0 ANSI: 5
164[ 2.252429] sd 0:0:0:0: [sda] 3931200 512-byte logical blocks: (2.01 GB/1.87 GiB)
165[ 2.253402] sd 0:0:0:0: [sda] Write Protect is off
166[ 2.254337] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
167[ 2.255347] ata2: port disabled--ignoring
168[ 2.255556] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
169[ 2.269164] hub 1-0:1.0: 4 ports detected
170[ 2.273241] sda: sda1
171[ 2.298527] sd 0:0:0:0: [sda] Attached SCSI disk
172[ 2.375150] Switched to clocksource tsc
173[ 3.113549] sd 0:0:0:0: Attached scsi generic sg0 type 0
174[ 3.624291] random: nonblocking pool is initialized
175[ 4.519224] udevd[1135]: starting version 175
176[ 4.876305] lxfb 0000:00:01.1: 8192 KB of video memory at 0xfd000000
177[ 4.903280] AMD Geode RNG detected
178[ 4.948336] cs5535-gpio cs5535-gpio: reserved resource region [io 0x1400-0x14ff]
179[ 4.991170] fbcon: Geode LX (fb0) is primary device
180[ 4.992385] Console: switching to colour frame buffer device 80x30
181[ 5.014268] fb0: Geode LX frame buffer device
182[ 5.038683] geode-aes: GEODE AES engine enabled.
183[ 5.084056] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x1c00-0x1c3f]
184[ 5.091938] cs5535-mfgpt cs5535-mfgpt: 2 MFGPT timers available
185[ 5.150245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
186[ 5.187798] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
187[ 5.231569] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
188[ 5.260925] ohci-pci: OHCI PCI platform driver
189[ 5.287890] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
190[ 5.328319] ohci-pci 0000:00:0f.4: OHCI PCI host controller
191[ 5.408129] input: PC Speaker as /devices/platform/pcspkr/input/input4
192[ 5.445700] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
193[ 5.475611] Clocksource tsc unstable (delta = 79996019 ns)
194[ 5.491711] Switched to clocksource pit
195[ 5.535114] ohci-pci 0000:00:0f.4: irq 9, io mem 0xfe016000
196[ 5.822764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
197[ 5.823712] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
198[ 5.825106] usb usb2: Product: OHCI PCI host controller
199[ 5.826433] usb usb2: Manufacturer: Linux 3.14.12-voyage ohci_hcd
200[ 5.826679] usb usb2: SerialNumber: 0000:00:0f.4
201[ 5.837456] hub 2-0:1.0: USB hub found
202[ 5.846088] hub 2-0:1.0: 4 ports detected
203[ 7.640900] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
204[ 7.996710] cs5535-mfgpt cs5535-mfgpt: registered timer 0
205[ 12.339605] NET: Registered protocol family 10
206[ 15.738155] Switched to clocksource tsc