Gitiles
Code Review Sign In
review.coreboot.org / board-status / 7fa6eb5147c75a332644da295b0f2f2072ee5157 / . / asus / kfsn4-dre / 4.6-1665-gf824784 / 2017-10-02T23_40_38Z / kernel_log.txt
blob: 7e0826a2101d014f9997b62faeac05eaf8f491d0 [file] [log] [blame]
Raptor Engineering Automated Coreboot Test Standb8476e52017-10-03 00:14:24 +0000[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 10/02/2017
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f6520-0x000f652f] mapped at [ffff8800000f6520]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F66F0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831)
63[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000EEA (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFAE900 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFAE940 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFAEA10 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFAEB60 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFAEB90 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFAEBD0 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFAED20 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048376
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour VGA+ 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.738 MHz processor
182[ 0.000150] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.47 BogoMIPS (lpj=7638952)
183[ 0.010787] pid_max: default: 32768 minimum: 301
184[ 0.015433] ACPI: Core revision 20140424
185[ 0.021763] ACPI: All ACPI Tables successfully acquired
186[ 0.027127] Security Framework initialized
187[ 0.031254] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037098] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044799] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.057816] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067510] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074409] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082238] Initializing cgroup subsys memory
194[ 0.086613] Initializing cgroup subsys devices
195[ 0.091080] Initializing cgroup subsys freezer
196[ 0.095537] Initializing cgroup subsys net_cls
197[ 0.100002] Initializing cgroup subsys blkio
198[ 0.104281] Initializing cgroup subsys perf_event
199[ 0.108994] Initializing cgroup subsys net_prio
200[ 0.113570] tseg: 0000000000
201[ 0.113581] CPU: Physical Processor ID: 0
202[ 0.117601] CPU: Processor Core ID: 0
203[ 0.121283] mce: CPU supports 6 MCE banks
204[ 0.125319] LVT offset 0 assigned for vector 0xf9
205[ 0.130039] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145387] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
209[ 0.154388] ftrace: allocating 21614 entries in 85 pages
210[ 0.169657] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215181] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332519] Performance Events: AMD PMU driver.
213[ 0.337089] ... version: 0
214[ 0.341101] ... bit width: 48
215[ 0.345203] ... generic registers: 4
216[ 0.349219] ... value mask: 0000ffffffffffff
217[ 0.354531] ... max period: 00007fffffffffff
218[ 0.359850] ... fixed-purpose events: 0
219[ 0.363862] ... event mask: 000000000000000f
220[ 0.371697] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.379904] x86: Booting SMP configuration:
222[ 0.384093] .... node #0, CPUs: #1 #2 #3
223[ 0.428430] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581189] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585491] smpboot: Total of 8 processors activated (30557.09 BogoMIPS)
226[ 0.597964] devtmpfs: initialized
227[ 0.609276] pinctrl core: initialized pinctrl subsystem
228[ 0.614672] NET: Registered protocol family 16
229[ 0.619341] cpuidle: using governor ladder
230[ 0.623446] cpuidle: using governor menu
231[ 0.627384] node 0 link 1: io port [1000, 3fff]
232[ 0.627387] TOM: 00000000c0000000 aka 3072M
233[ 0.631581] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.631584] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.631588] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.631590] TOM2: 0000000180000000 aka 6144M
237[ 0.635868] bus: [bus 00-05] on node 0 link 1
238[ 0.635870] bus: 00 [io 0x0000-0xffff]
239[ 0.635871] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.635873] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.635978] ACPI: bus type PCI registered
242[ 0.639993] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.646596] PCI: Using configuration type 1 for base access
244[ 0.652172] PCI: Using configuration type 1 for extended access
245[ 0.669341] ACPI: Added _OSI(Module Device)
246[ 0.673534] ACPI: Added _OSI(Processor Device)
247[ 0.677983] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682695] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.689172] ACPI: Executed 1 blocks of module-level executable AML code
250[ 0.698338] ACPI: Interpreter enabled
251[ 0.702020] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
252[ 0.711282] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
253[ 0.720555] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
254[ 0.729819] ACPI: (supports S0 S1 S5)
255[ 0.733490] ACPI: Using IOAPIC for interrupt routing
256[ 0.738498] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
257[ 0.767450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
258[ 0.773634] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
259[ 0.781846] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
260[ 0.822256] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
261[ 0.832259] PCI host bridge to bus 0000:00
262[ 0.836365] pci_bus 0000:00: root bus resource [bus 00-05]
263[ 0.841855] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
264[ 0.848032] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
265[ 0.854902] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
266[ 0.861774] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
267[ 0.868652] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
268[ 0.874850] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
269[ 0.875052] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
270[ 0.875059] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
271[ 0.875186] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
272[ 0.875194] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
273[ 0.875215] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
274[ 0.875225] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
275[ 0.875268] pci 0000:00:01.1: PME# supported from D3hot D3cold
276[ 0.875370] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
277[ 0.875382] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
278[ 0.875432] pci 0000:00:02.0: supports D1 D2
279[ 0.875438] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
280[ 0.875482] pci 0000:00:02.0: System wakeup disabled by ACPI
281[ 0.881207] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
282[ 0.881219] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
283[ 0.881269] pci 0000:00:02.1: supports D1 D2
284[ 0.881279] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
285[ 0.881322] pci 0000:00:02.1: System wakeup disabled by ACPI
286[ 0.887048] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
287[ 0.887083] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
288[ 0.887104] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
289[ 0.894238] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
290[ 0.900768] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
291[ 0.907906] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
292[ 0.914544] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
293[ 0.914552] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
294[ 0.914557] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
295[ 0.914562] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
296[ 0.914567] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
297[ 0.914571] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
298[ 0.914576] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
299[ 0.914700] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
300[ 0.914712] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
301[ 0.914716] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
302[ 0.914721] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
303[ 0.914726] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
304[ 0.914730] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
305[ 0.914735] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
306[ 0.914840] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
307[ 0.914907] pci 0000:00:09.0: System wakeup disabled by ACPI
308[ 0.920637] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
309[ 0.920680] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
310[ 0.920731] pci 0000:00:0b.0: System wakeup disabled by ACPI
311[ 0.926453] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
312[ 0.926523] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
313[ 0.926582] pci 0000:00:0c.0: System wakeup disabled by ACPI
314[ 0.932308] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
315[ 0.932358] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
316[ 0.932406] pci 0000:00:0d.0: System wakeup disabled by ACPI
317[ 0.938126] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
318[ 0.938177] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
319[ 0.938235] pci 0000:00:0e.0: System wakeup disabled by ACPI
320[ 0.943976] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
321[ 0.944107] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
322[ 0.944295] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
323[ 0.944422] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
324[ 0.944560] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
325[ 0.944683] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
326[ 0.944819] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
327[ 0.945028] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
328[ 0.945163] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
329[ 0.945305] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
330[ 0.945473] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
331[ 0.945502] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
332[ 0.945509] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
333[ 0.945522] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
334[ 0.945567] pci 0000:01:04.0: supports D1 D2
335[ 0.945674] pci 0000:00:09.0: PCI bridge to [bus 01]
336[ 0.950647] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
337[ 0.950650] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
338[ 0.950654] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
339[ 0.950768] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
340[ 0.950825] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
341[ 0.950851] pci 0000:02:00.0: reg 0x30: [mem 0x7b620000-0x7b62ffff pref]
342[ 0.950957] pci 0000:02:00.0: PME# supported from D3hot D3cold
343[ 0.951080] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
344[ 0.961083] pci 0000:00:0b.0: PCI bridge to [bus 02]
345[ 0.966051] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
346[ 0.966147] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
347[ 0.966188] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
348[ 0.966294] pci 0000:03:00.0: PME# supported from D3hot D3cold
349[ 0.966381] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
350[ 0.976373] pci 0000:00:0c.0: PCI bridge to [bus 03]
351[ 0.981343] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
352[ 0.981416] pci 0000:00:0d.0: PCI bridge to [bus 04]
353[ 0.986474] pci 0000:00:0e.0: PCI bridge to [bus 05]
354[ 0.991459] pci_bus 0000:00: on NUMA node 0
355[ 0.991559] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
356[ 0.997712] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
357[ 1.003848] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
358[ 1.011149] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
359[ 1.018450] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
360[ 1.025750] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
361[ 1.033043] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
362[ 1.039156] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
363[ 1.045299] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.052592] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
365[ 1.059897] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
366[ 1.067192] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
367[ 1.073325] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
368[ 1.079452] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
369[ 1.086749] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
370[ 1.094052] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
371[ 1.101353] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
372[ 1.109874] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
373[ 1.116337] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
374[ 1.122788] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
375[ 1.129256] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
376[ 1.136022] ACPI: Enabled 1 GPEs in block 00 to 1F
377[ 1.141147] vgaarb: setting as boot device: PCI:0000:01:04.0
378[ 1.146816] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
379[ 1.154914] vgaarb: loaded
380[ 1.157629] vgaarb: bridge control possible 0000:01:04.0
381[ 1.163112] PCI: Using ACPI for IRQ routing
382[ 1.167302] PCI: pci_cache_line_size set to 64 bytes
383[ 1.167358] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
384[ 1.167362] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
385[ 1.167672] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
386[ 1.174726] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
387[ 1.179780] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
388[ 1.188462] Switched to clocksource hpet
389[ 1.204059] pnp: PnP ACPI init
390[ 1.207164] ACPI: bus type PNP registered
391[ 1.211695] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
392[ 1.211780] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
393[ 1.211862] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.211960] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
395[ 1.211996] pnp 00:04: [dma 2]
396[ 1.212044] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
397[ 1.212075] pnp: PnP ACPI: found 5 devices
398[ 1.216185] ACPI: bus type PNP unregistered
399[ 1.228196] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7b620000-0x7b62ffff pref]: no compatible bridge window
400[ 1.238152] pci 0000:00:09.0: PCI bridge to [bus 01]
401[ 1.243127] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
402[ 1.249234] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
403[ 1.256027] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
404[ 1.263259] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
405[ 1.270484] pci 0000:00:0b.0: PCI bridge to [bus 02]
406[ 1.275459] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
407[ 1.282255] pci 0000:00:0c.0: PCI bridge to [bus 03]
408[ 1.287225] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
409[ 1.294020] pci 0000:00:0d.0: PCI bridge to [bus 04]
410[ 1.298998] pci 0000:00:0e.0: PCI bridge to [bus 05]
411[ 1.303977] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
412[ 1.303979] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
413[ 1.303982] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
414[ 1.303984] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
415[ 1.303987] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
416[ 1.303990] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
417[ 1.303993] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
418[ 1.303995] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
419[ 1.303998] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
420[ 1.304001] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
421[ 1.304140] NET: Registered protocol family 2
422[ 1.309030] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
423[ 1.316726] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
424[ 1.324061] TCP: Hash tables configured (established 65536 bind 65536)
425[ 1.330671] TCP: reno registered
426[ 1.333928] UDP hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.340140] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
428[ 1.346929] NET: Registered protocol family 1
429[ 1.351677] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
430[ 1.357756] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
431[ 1.363672] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.369213] pci 0000:00:00.0: Found enabled HT MSI Mapping
433[ 1.374724] pci 0000:00:0b.0: Found disabled HT MSI Mapping
434[ 1.380312] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.385860] pci 0000:00:00.0: Found enabled HT MSI Mapping
436[ 1.391377] pci 0000:00:0c.0: Found disabled HT MSI Mapping
437[ 1.396963] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.402531] pci 0000:00:00.0: Found enabled HT MSI Mapping
439[ 1.408042] pci 0000:00:0d.0: Found disabled HT MSI Mapping
440[ 1.413637] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.419182] pci 0000:00:00.0: Found enabled HT MSI Mapping
442[ 1.424702] pci 0000:00:0e.0: Found disabled HT MSI Mapping
443[ 1.430281] pci 0000:00:00.0: Found enabled HT MSI Mapping
444[ 1.435802] pci 0000:01:04.0: Video device with shadowed ROM
445[ 1.435811] PCI: CLS 64 bytes, default 64
446[ 1.435921] Unpacking initramfs...
447[ 1.819250] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
448[ 1.827206] PCI-DMA: Disabling AGP.
449[ 1.830877] PCI-DMA: aperture base @ b4000000 size 65536 KB
450[ 1.836462] PCI-DMA: using GART IOMMU.
451[ 1.840229] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
452[ 1.852146] platform rtc_cmos: registered platform RTC device (no PNP device found)
453[ 1.860304] microcode: CPU0: patch_level=0x01000084
454[ 1.865198] microcode: CPU1: patch_level=0x01000084
455[ 1.870091] microcode: CPU2: patch_level=0x01000084
456[ 1.874995] microcode: CPU3: patch_level=0x01000084
457[ 1.879899] microcode: CPU4: patch_level=0x01000084
458[ 1.884797] microcode: CPU5: patch_level=0x01000084
459[ 1.889690] microcode: CPU6: patch_level=0x01000084
460[ 1.894589] microcode: CPU7: patch_level=0x01000084
461[ 1.899578] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
462[ 1.908383] LVT offset 1 assigned for vector 0x400
463[ 1.913191] IBS: LVT offset 1 assigned
464[ 1.916982] perf: AMD IBS detected (0x00000007)
465[ 1.922143] futex hash table entries: 2048 (order: 5, 131072 bytes)
466[ 1.928528] audit: initializing netlink subsys (disabled)
467[ 1.933953] audit: type=2000 audit(1506989509.676:1): initialized
468[ 1.940827] HugeTLB registered 2 MB page size, pre-allocated 0 pages
469[ 1.947232] zbud: loaded
470[ 1.950149] VFS: Disk quotas dquot_6.5.2
471[ 1.954118] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
472[ 1.960662] msgmni has been set to 9945
473[ 1.965019] alg: No test for stdrng (krng)
474[ 1.969174] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
475[ 1.976671] io scheduler noop registered
476[ 1.980605] io scheduler deadline registered
477[ 1.984955] io scheduler cfq registered (default)
478[ 1.989876] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
479[ 1.990005] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
480[ 1.990117] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
481[ 1.990224] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
482[ 1.990378] aer 0000:00:0b.0:pcie02: service driver aer loaded
483[ 1.990401] aer 0000:00:0c.0:pcie02: service driver aer loaded
484[ 1.990428] aer 0000:00:0d.0:pcie02: service driver aer loaded
485[ 1.990453] aer 0000:00:0e.0:pcie02: service driver aer loaded
486[ 1.990475] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
487[ 1.997451] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
488[ 2.003987] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
489[ 2.003997] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
490[ 2.010961] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
491[ 2.017494] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
492[ 2.017504] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
493[ 2.024466] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
494[ 2.024477] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
495[ 2.031441] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
496[ 2.031472] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
497[ 2.037074] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
498[ 2.043787] GHES: HEST is not enabled!
499[ 2.047676] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
500[ 2.074277] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
501[ 2.101944] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
502[ 2.109853] Linux agpgart interface v0.103
503[ 2.114168] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
504[ 2.124602] serio: i8042 KBD port at 0x60,0x64 irq 1
505[ 2.129578] serio: i8042 AUX port at 0x60,0x64 irq 12
506[ 2.134813] mousedev: PS/2 mouse device common for all mice
507[ 2.140496] rtc_cmos rtc_cmos: RTC can wake from S4
508[ 2.145630] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
509[ 2.152027] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
510[ 2.159892] ledtrig-cpu: registered to indicate activity on CPUs
511[ 2.166080] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
512[ 2.172529] AMD IOMMUv2 functionality not available on this system
513[ 2.178857] TCP: cubic registered
514[ 2.182341] NET: Registered protocol family 10
515[ 2.187235] mip6: Mobile IPv6
516[ 2.190217] NET: Registered protocol family 17
517[ 2.194749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
518[ 2.203403] mpls_gso: MPLS GSO support
519[ 2.208031] registered taskstats version 1
520[ 2.212897] rtc_cmos rtc_cmos: setting system clock to 2017-10-03 00:11:51 UTC (1506989511)
521[ 2.221312] PM: Hibernation image not present or could not be loaded.
522[ 2.223098] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
523[ 2.230952] Write protecting the kernel read-only data: 8192k
524[ 2.240184] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
525[ 2.248780] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
526[ 2.281454] systemd-udevd[99]: starting version 215
527[ 2.287173] random: systemd-udevd urandom read with 3 bits of entropy available
528[ 2.315774] SCSI subsystem initialized
529[ 2.320284] ACPI: bus type USB registered
530[ 2.324559] usbcore: registered new interface driver usbfs
531[ 2.330175] usbcore: registered new interface driver hub
532[ 2.330283] pps_core: LinuxPPS API ver. 1 registered
533[ 2.330284] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
534[ 2.332437] FDC 0 is a post-1991 82077
535[ 2.353694] usbcore: registered new device driver usb
536[ 2.359345] PTP clock support registered
537[ 2.364298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
538[ 2.364615] libata version 3.00 loaded.
539[ 2.372597] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
540[ 2.376095] pata_amd 0000:00:06.0: version 0.4.1
541[ 2.376770] scsi0 : pata_amd
542[ 2.382006] ehci-pci: EHCI PCI platform driver
543[ 2.382107] scsi1 : pata_amd
544[ 2.382192] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
545[ 2.382193] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
546[ 2.382278] sata_nv 0000:00:07.0: version 3.5
547[ 2.382580] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
548[ 2.383152] scsi2 : sata_nv
549[ 2.383363] scsi3 : sata_nv
550[ 2.383469] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
551[ 2.383472] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
552[ 2.383782] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
553[ 2.384314] scsi4 : sata_nv
554[ 2.384480] scsi5 : sata_nv
555[ 2.384544] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
556[ 2.384546] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
557[ 2.454851] ehci-pci 0000:00:02.1: EHCI Host Controller
558[ 2.454918] tg3.c:v3.137 (May 11, 2014)
559[ 2.454930] tg3 0000:02:00.0: enabling device (0004 -> 0006)
560[ 2.455155] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
561[ 2.475408] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
562[ 2.482864] ehci-pci 0000:00:02.1: debug port 1
563[ 2.487452] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
564[ 2.487485] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
565[ 2.504047] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
566[ 2.509872] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
567[ 2.516670] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
568[ 2.523891] usb usb1: Product: EHCI Host Controller
569[ 2.528779] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
570[ 2.534881] usb usb1: SerialNumber: 0000:00:02.1
571[ 2.539433] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
572[ 2.539435] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
573[ 2.539437] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
574[ 2.539439] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
575[ 2.539573] tg3 0000:03:00.0: enabling device (0004 -> 0006)
576[ 2.539717] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
577[ 2.585730] hub 1-0:1.0: USB hub found
578[ 2.589510] hub 1-0:1.0: 10 ports detected
579[ 2.594705] ohci-pci: OHCI PCI platform driver
580[ 2.599354] ohci-pci 0000:00:02.0: OHCI PCI host controller
581[ 2.604961] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
582[ 2.612414] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
583[ 2.652477] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
584[ 2.662740] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
585[ 2.672476] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
586[ 2.674048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
587[ 2.674050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
588[ 2.674052] usb usb2: Product: OHCI PCI host controller
589[ 2.674053] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
590[ 2.674055] usb usb2: SerialNumber: 0000:00:02.0
591[ 2.674266] hub 2-0:1.0: USB hub found
592[ 2.674275] hub 2-0:1.0: 10 ports detected
593[ 2.691974] ata3: SATA link down (SStatus 0 SControl 300)
594[ 2.695972] ata5: SATA link down (SStatus 0 SControl 300)
595[ 2.728909] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
596[ 2.847908] tsc: Refined TSC clocksource calibration: 1909.787 MHz
597[ 3.019848] ata4: SATA link down (SStatus 0 SControl 300)
598[ 3.335736] ata6: SATA link down (SStatus 0 SControl 300)
599[ 3.359998] FS-Cache: Loaded
600[ 3.367785] RPC: Registered named UNIX socket transport module.
601[ 3.374934] RPC: Registered udp transport module.
602[ 3.381006] RPC: Registered tcp transport module.
603[ 3.387098] RPC: Registered tcp NFSv4.1 backchannel transport module.
604[ 3.400552] FS-Cache: Netfs 'nfs' registered for caching
605[ 3.417539] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
606[ 3.463806] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
607[ 3.851660] Switched to clocksource tsc
608[ 6.240113] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
609[ 6.246728] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
610[ 6.253612] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
611[ 6.614284] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
612[ 6.628296] systemd[1]: Detected architecture 'x86-64'.
613[ 6.677530] systemd[1]: Inserted module 'autofs4'
614[ 6.683994] systemd[1]: Set hostname to <cb-test-tgt>.
615[ 6.840381] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
616[ 6.853104] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
617[ 6.868503] systemd[1]: Expecting device dev-ttyS0.device...
618[ 6.882643] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
619[ 6.890430] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
620[ 6.898037] systemd[1]: Starting Remote File Systems (Pre).
621[ 6.914565] systemd[1]: Reached target Remote File Systems (Pre).
622[ 6.920686] systemd[1]: Starting Encrypted Volumes.
623[ 6.934538] systemd[1]: Reached target Encrypted Volumes.
624[ 6.940007] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
625[ 6.962530] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
626[ 6.971965] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
627[ 6.980030] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
628[ 6.987964] systemd[1]: Starting Paths.
629[ 7.002510] systemd[1]: Reached target Paths.
630[ 7.006906] systemd[1]: Starting Swap.
631[ 7.018497] systemd[1]: Reached target Swap.
632[ 7.022796] systemd[1]: Starting Root Slice.
633[ 7.034597] systemd[1]: Created slice Root Slice.
634[ 7.039362] systemd[1]: Starting User and Session Slice.
635[ 7.054495] systemd[1]: Created slice User and Session Slice.
636[ 7.060274] systemd[1]: Starting Delayed Shutdown Socket.
637[ 7.074499] systemd[1]: Listening on Delayed Shutdown Socket.
638[ 7.080284] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
639[ 7.098473] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
640[ 7.105463] systemd[1]: Starting Journal Socket (/dev/log).
641[ 7.122476] systemd[1]: Listening on Journal Socket (/dev/log).
642[ 7.128437] systemd[1]: Starting udev Kernel Socket.
643[ 7.142463] systemd[1]: Listening on udev Kernel Socket.
644[ 7.147812] systemd[1]: Starting udev Control Socket.
645[ 7.162450] systemd[1]: Listening on udev Control Socket.
646[ 7.167884] systemd[1]: Starting Journal Socket.
647[ 7.182441] systemd[1]: Listening on Journal Socket.
648[ 7.187458] systemd[1]: Starting System Slice.
649[ 7.202435] systemd[1]: Created slice System Slice.
650[ 7.207356] systemd[1]: Starting system-getty.slice.
651[ 7.222423] systemd[1]: Created slice system-getty.slice.
652[ 7.227848] systemd[1]: Starting system-serial\x2dgetty.slice.
653[ 7.242418] systemd[1]: Created slice system-serial\x2dgetty.slice.
654[ 7.248736] systemd[1]: Starting Increase datagram queue length...
655[ 7.267900] systemd[1]: Starting udev Coldplug all Devices...
656[ 7.304612] systemd[1]: Starting Load Kernel Modules...
657[ 7.321835] systemd[1]: Started Set Up Additional Binary Formats.
658[ 7.328090] systemd[1]: Mounting Debug File System...
659[ 7.343978] systemd[1]: Starting Create list of required static device nodes for the current kernel...
660[ 7.367508] systemd[1]: Mounting POSIX Message Queue File System...
661[ 7.383467] systemd[1]: Mounting Huge Pages File System...
662[ 7.399533] systemd[1]: Starting Slices.
663[ 7.414458] systemd[1]: Reached target Slices.
664[ 7.419031] systemd[1]: Starting Remount Root and Kernel File Systems...
665[ 7.450427] systemd[1]: Mounted Huge Pages File System.
666[ 7.466345] systemd[1]: Mounted POSIX Message Queue File System.
667[ 7.482349] systemd[1]: Mounted Debug File System.
668[ 7.498414] systemd[1]: Started Increase datagram queue length.
669[ 7.514410] systemd[1]: Started Load Kernel Modules.
670[ 7.534340] systemd[1]: Started Create list of required static device nodes for the current kernel.
671[ 7.558377] systemd[1]: Started Remount Root and Kernel File Systems.
672[ 7.574399] systemd[1]: Started udev Coldplug all Devices.
673[ 7.620273] systemd[1]: Started Various fixups to make systemd work better on Debian.
674[ 7.628170] systemd[1]: Starting Load/Save Random Seed...
675[ 7.644161] systemd[1]: Starting Create Static Device Nodes in /dev...
676[ 7.663843] systemd[1]: Starting Apply Kernel Variables...
677[ 7.680010] systemd[1]: Mounted Configuration File System.
678[ 7.685623] systemd[1]: Mounted FUSE Control File System.
679[ 7.691046] systemd[1]: Starting Syslog Socket.
680[ 7.706281] systemd[1]: Listening on Syslog Socket.
681[ 7.711195] systemd[1]: Starting Sockets.
682[ 7.722336] systemd[1]: Reached target Sockets.
683[ 7.726943] systemd[1]: Starting Journal Service...
684[ 7.754327] systemd[1]: Started Journal Service.
685[ 7.829797] systemd-udevd[212]: starting version 215
686[ 7.926399] systemd-journald[211]: Received request to flush runtime journal from PID 1
687[ 7.966392] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
688[ 7.974203] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
689[ 7.983159] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
690[ 7.992535] ACPI: Power Button [PWRB]
691[ 7.997702] input: PC Speaker as /devices/platform/pcspkr/input/input3
692[ 7.997827] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
693[ 7.997832] ACPI: Power Button [PWRF]
694[ 8.016369] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
695[ 8.016614] EDAC MC: Ver: 3.0.0
696[ 8.030282] MCE: In-kernel MCE decoding enabled.
697[ 8.037790] acpi-cpufreq: overriding BIOS provided _PSD data
698[ 8.038824] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
699[ 8.038856] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
700[ 8.055127] AMD64 EDAC driver v3.4.0
701[ 8.059007] EDAC amd64: DRAM ECC enabled.
702[ 8.063048] EDAC amd64: F10h detected (node 0).
703[ 8.067612] EDAC MC: DCT0 chip selects:
704[ 8.067614] EDAC amd64: MC: 0: 0MB 1: 0MB
705[ 8.072322] EDAC amd64: MC: 2: 0MB 3: 0MB
706[ 8.077054] EDAC amd64: MC: 4: 0MB 5: 0MB
707[ 8.077056] EDAC amd64: MC: 6: 2048MB 7: 2048MB
708[ 8.077058] EDAC MC: DCT1 chip selects:
709[ 8.077059] EDAC amd64: MC: 0: 0MB 1: 0MB
710[ 8.077059] EDAC amd64: MC: 2: 0MB 3: 0MB
711[ 8.077060] EDAC amd64: MC: 4: 0MB 5: 0MB
712[ 8.077061] EDAC amd64: MC: 6: 1024MB 7: 1024MB
713[ 8.077062] EDAC amd64: using x4 syndromes.
714[ 8.077146] EDAC amd64: CS6: Registered DDR2 RAM
715[ 8.077168] EDAC amd64: CS7: Registered DDR2 RAM
716[ 8.077722] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
717[ 8.077798] EDAC amd64: DRAM ECC enabled.
718[ 8.077812] EDAC amd64: F10h detected (node 1).
719[ 8.077852] EDAC MC: DCT0 chip selects:
720[ 8.077855] EDAC amd64: MC: 0: 1024MB 1: 0MB
721[ 8.077856] EDAC amd64: MC: 2: 0MB 3: 0MB
722[ 8.077856] EDAC amd64: MC: 4: 0MB 5: 0MB
723[ 8.077857] EDAC amd64: MC: 6: 0MB 7: 0MB
724[ 8.077858] EDAC MC: DCT1 chip selects:
725[ 8.077859] EDAC amd64: MC: 0: 0MB 1: 0MB
726[ 8.077860] EDAC amd64: MC: 2: 0MB 3: 0MB
727[ 8.077860] EDAC amd64: MC: 4: 0MB 5: 0MB
728[ 8.077861] EDAC amd64: MC: 6: 0MB 7: 0MB
729[ 8.077862] EDAC amd64: using x4 syndromes.
730[ 8.077863] EDAC amd64: MCT channel count: 1
731[ 8.077910] EDAC amd64: CS0: Registered DDR2 RAM
732[ 8.078180] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
733[ 8.086948] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
734[ 8.143241] kvm: Nested Virtualization enabled
735[ 8.143246] kvm: Nested Paging enabled
736[ 8.336309] random: nonblocking pool is initialized
737[ 38.505238] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****