Gitiles
Code Review Sign In
review.coreboot.org / board-status / 7fa6eb5147c75a332644da295b0f2f2072ee5157 / . / asus / kfsn4-dre / 4.4-91-g617536e / 2016-05-06T17_04_51Z / kernel_log.txt
blob: 1f1e2f51dedecbf34521f2fee3d883d4d92800fc [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
5[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
13[ 0.000000] NX (Execute Disable) protection: active
14[ 0.000000] SMBIOS 2.7 present.
15[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 05/06/2016
16[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
17[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
18[ 0.000000] AGP: No AGP bridge found
19[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
20[ 0.000000] MTRR default type: uncachable
21[ 0.000000] MTRR fixed ranges enabled:
22[ 0.000000] 00000-9FFFF write-back
23[ 0.000000] A0000-BFFFF uncachable
24[ 0.000000] C0000-FFFFF write-back
25[ 0.000000] MTRR variable ranges enabled:
26[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
27[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
28[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
29[ 0.000000] 3 disabled
30[ 0.000000] 4 disabled
31[ 0.000000] 5 disabled
32[ 0.000000] 6 disabled
33[ 0.000000] 7 disabled
34[ 0.000000] TOM2: 0000000180000000 aka 6144M
35[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
37[ 0.000000] found SMP MP-table at [mem 0x000f0820-0x000f082f] mapped at [ffff8800000f0820]
38[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
39[ 0.000000] Using GB pages for direct mapping
40[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
41[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
42[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
43[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
44[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
45[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
46[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
47[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
48[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
49[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
50[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
51[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
52[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
53[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
54[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
55[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
56[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
57[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
58[ 0.000000] ACPI: Early table checksum verification disabled
59[ 0.000000] ACPI: RSDP 0x00000000000F09F0 000024 (v02 CORE )
60[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
61[ 0.000000] ACPI: FACP 0x00000000BFFAD8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
62[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619)
63[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
64[ 0.000000] ACPI: SSDT 0x00000000BFFAD9D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A)
65[ 0.000000] ACPI: TCPA 0x00000000BFFAE880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: APIC 0x00000000BFFAE8C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: SRAT 0x00000000BFFAE990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
68[ 0.000000] ACPI: SLIT 0x00000000BFFAEAE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
69[ 0.000000] ACPI: HPET 0x00000000BFFAEB10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
70[ 0.000000] ACPI: SRAT 0x00000000BFFAEB50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: SLIT 0x00000000BFFAECA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: Local APIC address 0xfee00000
73[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
74[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
75[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
76[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
77[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
78[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
79[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
80[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
81[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
82[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
83[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
84[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
85[ 0.000000] NUMA: Initialized distance table, cnt=2
86[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
87[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
88[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
89[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
90[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
91[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
92[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
93[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
94[ 0.000000] Zone ranges:
95[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
96[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
97[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
98[ 0.000000] Movable zone start for each node
99[ 0.000000] Early memory node ranges
100[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
101[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
102[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
103[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
104[ 0.000000] On node 0 totalpages: 1048376
105[ 0.000000] DMA zone: 56 pages used for memmap
106[ 0.000000] DMA zone: 21 pages reserved
107[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
108[ 0.000000] DMA32 zone: 10695 pages used for memmap
109[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
110[ 0.000000] Normal zone: 3584 pages used for memmap
111[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
112[ 0.000000] On node 1 totalpages: 262144
113[ 0.000000] Normal zone: 3584 pages used for memmap
114[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
115[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
116[ 0.000000] ACPI: Local APIC address 0xfee00000
117[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
118[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
119[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
120[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
121[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
122[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
123[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
124[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
125[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
126[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
127[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
128[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
129[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
130[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
131[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
132[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
133[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
134[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
135[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
136[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
137[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
138[ 0.000000] ACPI: IRQ9 used by override.
139[ 0.000000] ACPI: IRQ14 used by override.
140[ 0.000000] ACPI: IRQ15 used by override.
141[ 0.000000] Using ACPI (MADT) for SMP configuration information
142[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
143[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
144[ 0.000000] nr_irqs_gsi: 40
145[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
146[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
147[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
148[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
149[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
150[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
151[ 0.000000] Booting paravirtualized kernel on bare hardware
152[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
153[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
154[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
155[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
156[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
157[ 0.000000] Policy zone: Normal
158[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64
159[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
160[ 0.000000] AGP: Checking aperture...
161[ 0.000000] AGP: No AGP bridge found
162[ 0.000000] AGP: Node 0: aperture [bus addr 0xa5fa000000-0xa5fbffffff] (32MB)
163[ 0.000000] Aperture beyond 4GB. Ignoring.
164[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
165[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
166[ 0.000000] AGP: This costs you 64MB of RAM
167[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
168[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
169[ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
170[ 0.000000] Hierarchical RCU implementation.
171[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
172[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
173[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
174[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
175[ 0.000000] spurious 8259A interrupt: IRQ7.
176[ 0.000000] Console: colour VGA+ 80x25
177[ 0.000000] console [ttyS0] enabled
178[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
179[ 0.000000] hpet clockevent registered
180[ 0.000000] tsc: Fast TSC calibration using PIT
181[ 0.000000] tsc: Detected 1909.865 MHz processor
182[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.73 BogoMIPS (lpj=7639460)
183[ 0.010796] pid_max: default: 32768 minimum: 301
184[ 0.015442] ACPI: Core revision 20140424
185[ 0.021796] ACPI: All ACPI Tables successfully acquired
186[ 0.027153] Security Framework initialized
187[ 0.031281] AppArmor: AppArmor disabled by boot time parameter
188[ 0.037116] Yama: disabled by default; enable with sysctl kernel.yama.*
189[ 0.044831] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
190[ 0.057921] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
191[ 0.067639] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
192[ 0.074539] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
193[ 0.082389] Initializing cgroup subsys memory
194[ 0.086770] Initializing cgroup subsys devices
195[ 0.091231] Initializing cgroup subsys freezer
196[ 0.095685] Initializing cgroup subsys net_cls
197[ 0.100141] Initializing cgroup subsys blkio
198[ 0.104431] Initializing cgroup subsys perf_event
199[ 0.109156] Initializing cgroup subsys net_prio
200[ 0.113744] tseg: 0000000000
201[ 0.113755] CPU: Physical Processor ID: 0
202[ 0.117777] CPU: Processor Core ID: 0
203[ 0.121448] mce: CPU supports 6 MCE banks
204[ 0.125484] LVT offset 0 assigned for vector 0xf9
205[ 0.130213] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
206Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
207tlb_flushall_shift: 6
208[ 0.145560] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
209[ 0.154573] ftrace: allocating 21614 entries in 85 pages
210[ 0.169906] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
211[ 0.215425] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
212[ 0.332502] Performance Events: AMD PMU driver.
213[ 0.337073] ... version: 0
214[ 0.341085] ... bit width: 48
215[ 0.345183] ... generic registers: 4
216[ 0.349199] ... value mask: 0000ffffffffffff
217[ 0.354504] ... max period: 00007fffffffffff
218[ 0.359833] ... fixed-purpose events: 0
219[ 0.363853] ... event mask: 000000000000000f
220[ 0.371720] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
221[ 0.379930] x86: Booting SMP configuration:
222[ 0.384119] .... node #0, CPUs: #1 #2 #3
223[ 0.428486] .... node #1, CPUs: #4 #5 #6 #7
224[ 0.581258] x86: Booted up 2 nodes, 8 CPUs
225[ 0.585558] smpboot: Total of 8 processors activated (30558.16 BogoMIPS)
226[ 0.598067] devtmpfs: initialized
227[ 0.609383] pinctrl core: initialized pinctrl subsystem
228[ 0.614788] NET: Registered protocol family 16
229[ 0.619447] cpuidle: using governor ladder
230[ 0.623551] cpuidle: using governor menu
231[ 0.627489] node 0 link 1: io port [1000, 3fff]
232[ 0.627492] TOM: 00000000c0000000 aka 3072M
233[ 0.631684] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
234[ 0.631688] node 0 link 1: mmio [fc000000, fc3fffff]
235[ 0.631692] node 0 link 1: mmio [f8000000, fbffffff]
236[ 0.631694] TOM2: 0000000180000000 aka 6144M
237[ 0.635971] bus: [bus 00-05] on node 0 link 1
238[ 0.635973] bus: 00 [io 0x0000-0xffff]
239[ 0.635975] bus: 00 [mem 0xd0000000-0xffffffff]
240[ 0.635977] bus: 00 [mem 0x180000000-0xfcffffffff]
241[ 0.636085] ACPI: bus type PCI registered
242[ 0.640106] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
243[ 0.646718] PCI: Using configuration type 1 for base access
244[ 0.652293] PCI: Using configuration type 1 for extended access
245[ 0.669323] ACPI: Added _OSI(Module Device)
246[ 0.673514] ACPI: Added _OSI(Processor Device)
247[ 0.677966] ACPI: Added _OSI(3.0 _SCP Extensions)
248[ 0.682678] ACPI: Added _OSI(Processor Aggregator Device)
249[ 0.691679] ACPI: Interpreter enabled
250[ 0.695367] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
251[ 0.704641] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
252[ 0.713912] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
253[ 0.723182] ACPI: (supports S0 S1 S5)
254[ 0.726853] ACPI: Using IOAPIC for interrupt routing
255[ 0.731863] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
256[ 0.759894] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
257[ 0.766080] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
258[ 0.774290] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
259[ 0.813799] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
260[ 0.823799] PCI host bridge to bus 0000:00
261[ 0.827901] pci_bus 0000:00: root bus resource [bus 00-05]
262[ 0.833392] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
263[ 0.839577] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
264[ 0.846457] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
265[ 0.853336] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
266[ 0.860213] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
267[ 0.866403] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
268[ 0.866613] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
269[ 0.866620] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
270[ 0.866760] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
271[ 0.866768] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
272[ 0.866786] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
273[ 0.866791] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
274[ 0.866811] pci 0000:00:01.1: PME# supported from D3hot D3cold
275[ 0.866911] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
276[ 0.866919] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
277[ 0.866970] pci 0000:00:02.0: supports D1 D2
278[ 0.866980] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
279[ 0.867027] pci 0000:00:02.0: System wakeup disabled by ACPI
280[ 0.872754] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
281[ 0.872763] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
282[ 0.872820] pci 0000:00:02.1: supports D1 D2
283[ 0.872823] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
284[ 0.872873] pci 0000:00:02.1: System wakeup disabled by ACPI
285[ 0.878607] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
286[ 0.878637] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
287[ 0.878648] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
288[ 0.885781] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
289[ 0.892312] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
290[ 0.899444] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
291[ 0.906082] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
292[ 0.906090] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
293[ 0.906099] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
294[ 0.906104] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
295[ 0.906109] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
296[ 0.906113] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
297[ 0.906118] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
298[ 0.906217] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
299[ 0.906231] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
300[ 0.906236] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
301[ 0.906241] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
302[ 0.906245] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
303[ 0.906250] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
304[ 0.906255] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
305[ 0.906381] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
306[ 0.906466] pci 0000:00:09.0: System wakeup disabled by ACPI
307[ 0.912184] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
308[ 0.912235] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
309[ 0.912288] pci 0000:00:0b.0: System wakeup disabled by ACPI
310[ 0.918006] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
311[ 0.918054] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
312[ 0.918108] pci 0000:00:0c.0: System wakeup disabled by ACPI
313[ 0.923835] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
314[ 0.923875] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
315[ 0.923934] pci 0000:00:0d.0: System wakeup disabled by ACPI
316[ 0.929649] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
317[ 0.929688] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
318[ 0.929756] pci 0000:00:0e.0: System wakeup disabled by ACPI
319[ 0.935491] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
320[ 0.935637] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
321[ 0.935762] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
322[ 0.935896] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
323[ 0.936025] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
324[ 0.936154] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
325[ 0.936278] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
326[ 0.936401] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
327[ 0.936501] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
328[ 0.936650] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
329[ 0.936838] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
330[ 0.936851] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
331[ 0.936861] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
332[ 0.936871] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
333[ 0.936916] pci 0000:01:04.0: supports D1 D2
334[ 0.937029] pci 0000:00:09.0: PCI bridge to [bus 01]
335[ 0.942009] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
336[ 0.942012] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
337[ 0.942016] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
338[ 0.942121] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
339[ 0.942184] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
340[ 0.942228] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
341[ 0.942313] pci 0000:02:00.0: PME# supported from D3hot D3cold
342[ 0.942434] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
343[ 0.952437] pci 0000:00:0b.0: PCI bridge to [bus 02]
344[ 0.957404] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
345[ 0.957494] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
346[ 0.957529] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
347[ 0.957631] pci 0000:03:00.0: PME# supported from D3hot D3cold
348[ 0.957721] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
349[ 0.967718] pci 0000:00:0c.0: PCI bridge to [bus 03]
350[ 0.972687] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
351[ 0.972763] pci 0000:00:0d.0: PCI bridge to [bus 04]
352[ 0.977812] pci 0000:00:0e.0: PCI bridge to [bus 05]
353[ 0.982795] pci_bus 0000:00: on NUMA node 0
354[ 0.982892] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
355[ 0.989047] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
356[ 0.995187] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
357[ 1.002508] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
358[ 1.009818] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
359[ 1.017116] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
360[ 1.024411] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
361[ 1.030536] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
362[ 1.036673] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
363[ 1.043956] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
364[ 1.051249] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
365[ 1.058554] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
366[ 1.064717] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
367[ 1.070847] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
368[ 1.078162] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
369[ 1.085452] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
370[ 1.092745] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
371[ 1.101265] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
372[ 1.107725] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
373[ 1.114188] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
374[ 1.120643] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
375[ 1.127352] ACPI: Enabled 1 GPEs in block 00 to 1F
376[ 1.132473] vgaarb: setting as boot device: PCI:0000:01:04.0
377[ 1.138144] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
378[ 1.146240] vgaarb: loaded
379[ 1.148956] vgaarb: bridge control possible 0000:01:04.0
380[ 1.154444] PCI: Using ACPI for IRQ routing
381[ 1.158638] PCI: pci_cache_line_size set to 64 bytes
382[ 1.158695] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
383[ 1.158699] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
384[ 1.159006] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
385[ 1.166062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
386[ 1.171124] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
387[ 1.179804] Switched to clocksource hpet
388[ 1.195438] pnp: PnP ACPI init
389[ 1.198546] ACPI: bus type PNP registered
390[ 1.203073] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
391[ 1.203159] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
392[ 1.203241] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
393[ 1.203339] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
394[ 1.203376] pnp 00:04: [dma 2]
395[ 1.203424] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
396[ 1.203445] pnp: PnP ACPI: found 5 devices
397[ 1.207558] ACPI: bus type PNP unregistered
398[ 1.219600] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
399[ 1.229554] pci 0000:00:09.0: PCI bridge to [bus 01]
400[ 1.234531] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
401[ 1.240633] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
402[ 1.247426] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
403[ 1.254658] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
404[ 1.261881] pci 0000:00:0b.0: PCI bridge to [bus 02]
405[ 1.266856] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
406[ 1.273650] pci 0000:00:0c.0: PCI bridge to [bus 03]
407[ 1.278621] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
408[ 1.285415] pci 0000:00:0d.0: PCI bridge to [bus 04]
409[ 1.290391] pci 0000:00:0e.0: PCI bridge to [bus 05]
410[ 1.295372] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
411[ 1.295375] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
412[ 1.295378] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
413[ 1.295380] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
414[ 1.295383] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
415[ 1.295385] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
416[ 1.295388] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
417[ 1.295391] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
418[ 1.295394] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
419[ 1.295397] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
420[ 1.295533] NET: Registered protocol family 2
421[ 1.300426] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
422[ 1.308119] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
423[ 1.315450] TCP: Hash tables configured (established 65536 bind 65536)
424[ 1.322051] TCP: reno registered
425[ 1.325310] UDP hash table entries: 4096 (order: 5, 131072 bytes)
426[ 1.331517] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
427[ 1.338295] NET: Registered protocol family 1
428[ 1.343041] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
429[ 1.349127] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
430[ 1.355035] pci 0000:00:00.0: Found enabled HT MSI Mapping
431[ 1.360562] pci 0000:00:00.0: Found enabled HT MSI Mapping
432[ 1.366074] pci 0000:00:0b.0: Found disabled HT MSI Mapping
433[ 1.371658] pci 0000:00:00.0: Found enabled HT MSI Mapping
434[ 1.377204] pci 0000:00:00.0: Found enabled HT MSI Mapping
435[ 1.382709] pci 0000:00:0c.0: Found disabled HT MSI Mapping
436[ 1.388295] pci 0000:00:00.0: Found enabled HT MSI Mapping
437[ 1.393851] pci 0000:00:00.0: Found enabled HT MSI Mapping
438[ 1.399360] pci 0000:00:0d.0: Found disabled HT MSI Mapping
439[ 1.404947] pci 0000:00:00.0: Found enabled HT MSI Mapping
440[ 1.410491] pci 0000:00:00.0: Found enabled HT MSI Mapping
441[ 1.416004] pci 0000:00:0e.0: Found disabled HT MSI Mapping
442[ 1.421583] pci 0000:00:00.0: Found enabled HT MSI Mapping
443[ 1.427104] pci 0000:01:04.0: Video device with shadowed ROM
444[ 1.427113] PCI: CLS 64 bytes, default 64
445[ 1.427220] Unpacking initramfs...
446[ 1.810861] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
447[ 1.818804] PCI-DMA: Disabling AGP.
448[ 1.823923] PCI-DMA: aperture base @ b4000000 size 65536 KB
449[ 1.829502] PCI-DMA: using GART IOMMU.
450[ 1.833260] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
451[ 1.845576] platform rtc_cmos: registered platform RTC device (no PNP device found)
452[ 1.853746] microcode: CPU0: patch_level=0x01000084
453[ 1.858638] microcode: CPU1: patch_level=0x01000084
454[ 1.863534] microcode: CPU2: patch_level=0x01000084
455[ 1.868434] microcode: CPU3: patch_level=0x01000084
456[ 1.873344] microcode: CPU4: patch_level=0x01000084
457[ 1.878240] microcode: CPU5: patch_level=0x01000084
458[ 1.883141] microcode: CPU6: patch_level=0x01000084
459[ 1.888039] microcode: CPU7: patch_level=0x01000084
460[ 1.893034] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
461[ 1.901833] LVT offset 1 assigned for vector 0x400
462[ 1.906652] IBS: LVT offset 1 assigned
463[ 1.910441] perf: AMD IBS detected (0x00000007)
464[ 1.915604] futex hash table entries: 2048 (order: 5, 131072 bytes)
465[ 1.921997] audit: initializing netlink subsys (disabled)
466[ 1.927420] audit: type=2000 audit(1462558274.660:1): initialized
467[ 1.934289] HugeTLB registered 2 MB page size, pre-allocated 0 pages
468[ 1.940691] zbud: loaded
469[ 1.943613] VFS: Disk quotas dquot_6.5.2
470[ 1.947580] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
471[ 1.954116] msgmni has been set to 9945
472[ 1.958504] alg: No test for stdrng (krng)
473[ 1.962664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
474[ 1.970180] io scheduler noop registered
475[ 1.974119] io scheduler deadline registered
476[ 1.978479] io scheduler cfq registered (default)
477[ 1.983410] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
478[ 1.983544] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
479[ 1.983656] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
480[ 1.983796] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
481[ 1.983946] aer 0000:00:0b.0:pcie02: service driver aer loaded
482[ 1.983975] aer 0000:00:0c.0:pcie02: service driver aer loaded
483[ 1.983997] aer 0000:00:0d.0:pcie02: service driver aer loaded
484[ 1.984018] aer 0000:00:0e.0:pcie02: service driver aer loaded
485[ 1.984041] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
486[ 1.991012] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
487[ 1.997540] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
488[ 1.997550] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
489[ 2.004514] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
490[ 2.011047] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
491[ 2.011056] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
492[ 2.018020] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
493[ 2.018029] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
494[ 2.024996] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
495[ 2.025028] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
496[ 2.030639] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
497[ 2.037347] GHES: HEST is not enabled!
498[ 2.041242] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
499[ 2.067839] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
500[ 2.095522] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
501[ 2.103434] Linux agpgart interface v0.103
502[ 2.107748] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
503[ 2.118304] serio: i8042 KBD port at 0x60,0x64 irq 1
504[ 2.123356] serio: i8042 AUX port at 0x60,0x64 irq 12
505[ 2.128648] mousedev: PS/2 mouse device common for all mice
506[ 2.134323] rtc_cmos rtc_cmos: RTC can wake from S4
507[ 2.139447] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
508[ 2.145841] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
509[ 2.153706] ledtrig-cpu: registered to indicate activity on CPUs
510[ 2.159899] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
511[ 2.166344] AMD IOMMUv2 functionality not available on this system
512[ 2.172675] TCP: cubic registered
513[ 2.176150] NET: Registered protocol family 10
514[ 2.181060] mip6: Mobile IPv6
515[ 2.184055] NET: Registered protocol family 17
516[ 2.184524] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
517[ 2.197120] mpls_gso: MPLS GSO support
518[ 2.201733] registered taskstats version 1
519[ 2.206600] rtc_cmos rtc_cmos: setting system clock to 2016-05-06 18:11:16 UTC (1462558276)
520[ 2.215022] PM: Hibernation image not present or could not be loaded.
521[ 2.216850] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
522[ 2.224688] Write protecting the kernel read-only data: 8192k
523[ 2.233933] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
524[ 2.242526] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
525[ 2.276325] systemd-udevd[98]: starting version 215
526[ 2.282070] random: systemd-udevd urandom read with 4 bits of entropy available
527[ 2.312403] ACPI: bus type USB registered
528[ 2.312521] SCSI subsystem initialized
529[ 2.320293] usbcore: registered new interface driver usbfs
530[ 2.325943] usbcore: registered new interface driver hub
531[ 2.327534] FDC 0 is a post-1991 82077
532[ 2.335284] usbcore: registered new device driver usb
533[ 2.341222] pps_core: LinuxPPS API ver. 1 registered
534[ 2.346216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
535[ 2.355656] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
536[ 2.363112] PTP clock support registered
537[ 2.363459] libata version 3.00 loaded.
538[ 2.367551] ehci-pci: EHCI PCI platform driver
539[ 2.372442] ehci-pci 0000:00:02.1: EHCI Host Controller
540[ 2.372445] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
541[ 2.383931] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
542[ 2.391531] ehci-pci 0000:00:02.1: debug port 1
543[ 2.396180] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
544[ 2.396268] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
545[ 2.396459] tg3.c:v3.137 (May 11, 2014)
546[ 2.396472] tg3 0000:02:00.0: enabling device (0004 -> 0006)
547[ 2.396678] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
548[ 2.427390] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
549[ 2.433219] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
550[ 2.440014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
551[ 2.447247] usb usb1: Product: EHCI Host Controller
552[ 2.450824] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
553[ 2.450827] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
554[ 2.450829] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
555[ 2.450831] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
556[ 2.450952] tg3 0000:03:00.0: enabling device (0004 -> 0006)
557[ 2.451087] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
558[ 2.498051] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
559[ 2.504147] usb usb1: SerialNumber: 0000:00:02.1
560[ 2.509072] hub 1-0:1.0: USB hub found
561[ 2.512851] hub 1-0:1.0: 10 ports detected
562[ 2.517355] pata_amd 0000:00:06.0: version 0.4.1
563[ 2.517977] ohci-pci: OHCI PCI platform driver
564[ 2.518228] scsi0 : pata_amd
565[ 2.525551] scsi1 : pata_amd
566[ 2.528527] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
567[ 2.532150] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
568[ 2.532153] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
569[ 2.532155] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
570[ 2.532157] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
571[ 2.570046] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
572[ 2.577123] sata_nv 0000:00:07.0: version 3.5
573[ 2.577415] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
574[ 2.583849] scsi2 : sata_nv
575[ 2.586810] scsi3 : sata_nv
576[ 2.589679] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
577[ 2.596814] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
578[ 2.604148] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
579[ 2.610311] scsi4 : sata_nv
580[ 2.613283] scsi5 : sata_nv
581[ 2.616155] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
582[ 2.623296] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
583[ 2.630614] ohci-pci 0000:00:02.0: OHCI PCI host controller
584[ 2.636215] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
585[ 2.643670] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
586[ 2.705343] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
587[ 2.712141] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
588[ 2.719363] usb usb2: Product: OHCI PCI host controller
589[ 2.724593] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
590[ 2.730692] usb usb2: SerialNumber: 0000:00:02.0
591[ 2.735569] hub 2-0:1.0: USB hub found
592[ 2.739344] hub 2-0:1.0: 10 ports detected
593[ 2.843252] tsc: Refined TSC clocksource calibration: 1909.788 MHz
594[ 2.915233] ata3: SATA link down (SStatus 0 SControl 300)
595[ 2.939219] ata5: SATA link down (SStatus 0 SControl 300)
596[ 3.231118] ata4: SATA link down (SStatus 0 SControl 300)
597[ 3.547009] ata6: SATA link down (SStatus 0 SControl 300)
598[ 3.571117] FS-Cache: Loaded
599[ 3.579019] RPC: Registered named UNIX socket transport module.
600[ 3.586055] RPC: Registered udp transport module.
601[ 3.592132] RPC: Registered tcp transport module.
602[ 3.598224] RPC: Registered tcp NFSv4.1 backchannel transport module.
603[ 3.611702] FS-Cache: Netfs 'nfs' registered for caching
604[ 3.629045] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
605[ 3.675067] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
606[ 3.846994] Switched to clocksource tsc
607[ 5.353412] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
608[ 5.359943] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
609[ 5.366833] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
610[ 6.163714] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
611[ 6.177756] systemd[1]: Detected architecture 'x86-64'.
612[ 6.404547] systemd[1]: Inserted module 'autofs4'
613[ 6.410553] systemd[1]: Set hostname to <cb-test-tgt>.
614[ 6.473120] random: nonblocking pool is initialized
615[ 6.645017] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
616[ 6.657738] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
617[ 6.673132] systemd[1]: Expecting device dev-ttyS0.device...
618[ 6.686053] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
619[ 6.693839] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
620[ 6.701441] systemd[1]: Starting Remote File Systems (Pre).
621[ 6.717953] systemd[1]: Reached target Remote File Systems (Pre).
622[ 6.724088] systemd[1]: Starting Encrypted Volumes.
623[ 6.737949] systemd[1]: Reached target Encrypted Volumes.
624[ 6.743396] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
625[ 6.765935] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
626[ 6.775358] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
627[ 6.783401] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
628[ 6.791335] systemd[1]: Starting Paths.
629[ 6.805942] systemd[1]: Reached target Paths.
630[ 6.810336] systemd[1]: Starting Swap.
631[ 6.821908] systemd[1]: Reached target Swap.
632[ 6.826214] systemd[1]: Starting Root Slice.
633[ 6.837902] systemd[1]: Created slice Root Slice.
634[ 6.842625] systemd[1]: Starting User and Session Slice.
635[ 6.857901] systemd[1]: Created slice User and Session Slice.
636[ 6.863670] systemd[1]: Starting Delayed Shutdown Socket.
637[ 6.877888] systemd[1]: Listening on Delayed Shutdown Socket.
638[ 6.883659] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
639[ 6.901899] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
640[ 6.908877] systemd[1]: Starting Journal Socket (/dev/log).
641[ 6.925878] systemd[1]: Listening on Journal Socket (/dev/log).
642[ 6.931832] systemd[1]: Starting udev Kernel Socket.
643[ 6.945868] systemd[1]: Listening on udev Kernel Socket.
644[ 6.951213] systemd[1]: Starting udev Control Socket.
645[ 6.965875] systemd[1]: Listening on udev Control Socket.
646[ 6.971305] systemd[1]: Starting Journal Socket.
647[ 6.985854] systemd[1]: Listening on Journal Socket.
648[ 6.990868] systemd[1]: Starting System Slice.
649[ 7.005847] systemd[1]: Created slice System Slice.
650[ 7.010763] systemd[1]: Starting system-getty.slice.
651[ 7.025841] systemd[1]: Created slice system-getty.slice.
652[ 7.031260] systemd[1]: Starting system-serial\x2dgetty.slice.
653[ 7.045831] systemd[1]: Created slice system-serial\x2dgetty.slice.
654[ 7.052142] systemd[1]: Starting Increase datagram queue length...
655[ 7.071043] systemd[1]: Starting udev Coldplug all Devices...
656[ 7.117341] systemd[1]: Starting Load Kernel Modules...
657[ 7.304010] systemd[1]: Started Set Up Additional Binary Formats.
658[ 7.310362] systemd[1]: Mounting Debug File System...
659[ 7.328048] systemd[1]: Starting Create list of required static device nodes for the current kernel...
660[ 7.351581] systemd[1]: Mounting POSIX Message Queue File System...
661[ 7.370803] systemd[1]: Mounting Huge Pages File System...
662[ 7.386673] systemd[1]: Starting Slices.
663[ 7.397797] systemd[1]: Reached target Slices.
664[ 7.402339] systemd[1]: Starting Remount Root and Kernel File Systems...
665[ 7.429773] systemd[1]: Mounted Huge Pages File System.
666[ 7.445759] systemd[1]: Mounted POSIX Message Queue File System.
667[ 7.461696] systemd[1]: Mounted Debug File System.
668[ 7.477728] systemd[1]: Started Increase datagram queue length.
669[ 7.493706] systemd[1]: Started Load Kernel Modules.
670[ 7.513678] systemd[1]: Started Create list of required static device nodes for the current kernel.
671[ 7.533731] systemd[1]: Started Remount Root and Kernel File Systems.
672[ 7.549661] systemd[1]: Started udev Coldplug all Devices.
673[ 7.595122] systemd[1]: Started Various fixups to make systemd work better on Debian.
674[ 7.603020] systemd[1]: Starting Load/Save Random Seed...
675[ 7.619317] systemd[1]: Starting Create Static Device Nodes in /dev...
676[ 7.639398] systemd[1]: Starting Apply Kernel Variables...
677[ 7.655642] systemd[1]: Mounted Configuration File System.
678[ 7.661491] systemd[1]: Mounted FUSE Control File System.
679[ 7.667103] systemd[1]: Starting Syslog Socket.
680[ 7.681669] systemd[1]: Listening on Syslog Socket.
681[ 7.686656] systemd[1]: Starting Sockets.
682[ 7.701680] systemd[1]: Reached target Sockets.
683[ 7.706328] systemd[1]: Starting Journal Service...
684[ 7.733680] systemd[1]: Started Journal Service.
685[ 7.867363] systemd-udevd[210]: starting version 215
686[ 8.135278] systemd-journald[208]: Received request to flush runtime journal from PID 1
687[ 8.631019] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
688[ 8.638227] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
689[ 8.646620] ACPI: Power Button [PWRB]
690[ 8.650495] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
691[ 8.657944] ACPI: Power Button [PWRF]
692[ 8.662069] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
693[ 8.670924] input: PC Speaker as /devices/platform/pcspkr/input/input4
694[ 8.671238] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
695[ 8.687807] EDAC MC: Ver: 3.0.0
696[ 8.748256] MCE: In-kernel MCE decoding enabled.
697[ 8.754567] acpi-cpufreq: overriding BIOS provided _PSD data
698[ 8.778678] kvm: Nested Virtualization enabled
699[ 8.783218] kvm: Nested Paging enabled
700[ 8.787371] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
701[ 8.793977] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
702[ 8.794177] AMD64 EDAC driver v3.4.0
703[ 8.804081] EDAC amd64: DRAM ECC enabled.
704[ 8.808929] EDAC amd64: F10h detected (node 0).
705[ 8.813548] EDAC MC: DCT0 chip selects:
706[ 8.813552] EDAC amd64: MC: 0: 0MB 1: 0MB
707[ 8.818280] EDAC amd64: MC: 2: 0MB 3: 0MB
708[ 8.823007] EDAC amd64: MC: 4: 0MB 5: 0MB
709[ 8.827710] EDAC amd64: MC: 6: 1024MB 7: 1024MB
710[ 8.832413] EDAC MC: DCT1 chip selects:
711[ 8.832416] EDAC amd64: MC: 0: 0MB 1: 0MB
712[ 8.837128] EDAC amd64: MC: 2: 0MB 3: 0MB
713[ 8.841831] EDAC amd64: MC: 4: 0MB 5: 0MB
714[ 8.846537] EDAC amd64: MC: 6: 1024MB 7: 1024MB
715[ 8.851242] EDAC amd64: using x4 syndromes.
716[ 8.855423] EDAC amd64: MCT channel count: 2
717[ 8.859785] EDAC amd64: CS6: Registered DDR2 RAM
718[ 8.864443] EDAC amd64: CS7: Registered DDR2 RAM
719[ 8.869521] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
720[ 8.879261] EDAC amd64: DRAM ECC enabled.
721[ 8.883348] EDAC amd64: F10h detected (node 1).
722[ 8.887925] EDAC MC: DCT0 chip selects:
723[ 8.887929] EDAC amd64: MC: 0: 1024MB 1: 0MB
724[ 8.892635] EDAC amd64: MC: 2: 0MB 3: 0MB
725[ 8.897339] EDAC amd64: MC: 4: 0MB 5: 0MB
726[ 8.902043] EDAC amd64: MC: 6: 0MB 7: 0MB
727[ 8.906750] EDAC MC: DCT1 chip selects:
728[ 8.906753] EDAC amd64: MC: 0: 0MB 1: 0MB
729[ 8.911461] EDAC amd64: MC: 2: 0MB 3: 0MB
730[ 8.916166] EDAC amd64: MC: 4: 0MB 5: 0MB
731[ 8.920869] EDAC amd64: MC: 6: 0MB 7: 0MB
732[ 8.925573] EDAC amd64: using x4 syndromes.
733[ 8.929769] EDAC amd64: MCT channel count: 1
734[ 8.934096] EDAC amd64: CS0: Registered DDR2 RAM
735[ 8.938975] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
736[ 8.950182] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
737[ 39.590234] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****