Paul Menzel | 2628571 | 2017-04-17 10:57:51 +0200 | [diff] [blame] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.13-1-grml-amd64 (team@grml.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.6-1+grml.1 (2014-03-10) |
| 5 | [ 0.000000] Command line: initrd=/boot/grml64small/initrd.img boot=live apm=power-off vga=791 nomce boot=live live-media-path=/live/grml64-small/ boot=live bootid=50cb75e9-61d3-4cda-9c64-fba7e464746e ssh=remote verbose console=ttyS0,115200n8 BOOT_IMAGE=/boot/grml64small/vmlinuz |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7c64fff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x00000000c7c65000-0x00000000dfffffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| 13 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable |
| 14 | [ 0.000000] NX (Execute Disable) protection: active |
| 15 | [ 0.000000] SMBIOS 2.7 present. |
| 16 | [ 0.000000] DMI: AMD Persimmon/Persimmon, BIOS 4.1-858-gc19f876 10/27/2015 |
| 17 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 18 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 19 | [ 0.000000] No AGP bridge found |
| 20 | [ 0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000 |
| 21 | [ 0.000000] MTRR default type: uncachable |
| 22 | [ 0.000000] MTRR fixed ranges enabled: |
| 23 | [ 0.000000] 00000-9FFFF write-back |
| 24 | [ 0.000000] A0000-BFFFF uncachable |
| 25 | [ 0.000000] C0000-FFFFF write-back |
| 26 | [ 0.000000] MTRR variable ranges enabled: |
| 27 | [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| 28 | [ 0.000000] 1 base 080000000 mask FC0000000 write-back |
| 29 | [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back |
| 30 | [ 0.000000] 3 disabled |
| 31 | [ 0.000000] 4 disabled |
| 32 | [ 0.000000] 5 disabled |
| 33 | [ 0.000000] 6 base 0FF800000 mask FFF800000 write-protect |
| 34 | [ 0.000000] 7 disabled |
| 35 | [ 0.000000] TOM2: 000000019f000000 aka 6640M |
| 36 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 37 | [ 0.000000] e820: last_pfn = 0xc7c65 max_arch_pfn = 0x400000000 |
| 38 | [ 0.000000] found SMP MP-table at [mem 0x000f1540-0x000f154f] mapped at [ffff8800000f1540] |
| 39 | [ 0.000000] Scanning 1 areas for low memory corruption |
| 40 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 41 | [ 0.000000] Using GB pages for direct mapping |
| 42 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 43 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 44 | [ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE |
| 45 | [ 0.000000] BRK [0x01aa1000, 0x01aa1fff] PGTABLE |
| 46 | [ 0.000000] BRK [0x01aa2000, 0x01aa2fff] PGTABLE |
| 47 | [ 0.000000] init_memory_mapping: [mem 0x19ee00000-0x19effffff] |
| 48 | [ 0.000000] [mem 0x19ee00000-0x19effffff] page 2M |
| 49 | [ 0.000000] BRK [0x01aa3000, 0x01aa3fff] PGTABLE |
| 50 | [ 0.000000] init_memory_mapping: [mem 0x19c000000-0x19edfffff] |
| 51 | [ 0.000000] [mem 0x19c000000-0x19edfffff] page 2M |
| 52 | [ 0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff] |
| 53 | [ 0.000000] [mem 0x180000000-0x19bffffff] page 2M |
| 54 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7c64fff] |
| 55 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 56 | [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| 57 | [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G |
| 58 | [ 0.000000] [mem 0xc0000000-0xc7bfffff] page 2M |
| 59 | [ 0.000000] [mem 0xc7c00000-0xc7c64fff] page 4k |
| 60 | [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff] |
| 61 | [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G |
| 62 | [ 0.000000] RAMDISK: [mem 0x7efcc000-0x7fffefff] |
| 63 | [ 0.000000] ACPI: RSDP 00000000000f1710 000024 (v02 CORE ) |
| 64 | [ 0.000000] ACPI: XSDT 00000000c7c800e0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 65 | [ 0.000000] ACPI: FACP 00000000c7c829e0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| 66 | [ 0.000000] ACPI: DSDT 00000000c7c80280 00275E (v02 AMD COREBOOT 00010001 INTL 20150619) |
| 67 | [ 0.000000] ACPI: FACS 00000000c7c80240 000040 |
| 68 | [ 0.000000] ACPI: SSDT 00000000c7c82ae0 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 69 | [ 0.000000] ACPI: TCPA 00000000c7c82b30 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| 70 | [ 0.000000] ACPI: APIC 00000000c7c82b70 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 71 | [ 0.000000] ACPI: HEST 00000000c7c82bd0 000198 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 72 | [ 0.000000] ACPI: SSDT 00000000c7c82d70 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| 73 | [ 0.000000] ACPI: SSDT 00000000c7c84400 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| 74 | [ 0.000000] ACPI: HPET 00000000c7c847e0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 75 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 76 | [ 0.000000] No NUMA configuration found |
| 77 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff] |
| 78 | [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19effffff] |
| 79 | [ 0.000000] NODE_DATA [mem 0x19eff9000-0x19effdfff] |
| 80 | [ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880198c00000-ffff88019dbfffff] on node 0 |
| 81 | [ 0.000000] Zone ranges: |
| 82 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 83 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 84 | [ 0.000000] Normal [mem 0x100000000-0x19effffff] |
| 85 | [ 0.000000] Movable zone start for each node |
| 86 | [ 0.000000] Early memory node ranges |
| 87 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 88 | [ 0.000000] node 0: [mem 0x00100000-0xc7c64fff] |
| 89 | [ 0.000000] node 0: [mem 0x100000000-0x19effffff] |
| 90 | [ 0.000000] On node 0 totalpages: 1469443 |
| 91 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 92 | [ 0.000000] DMA zone: 21 pages reserved |
| 93 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 94 | [ 0.000000] DMA32 zone: 11132 pages used for memmap |
| 95 | [ 0.000000] DMA32 zone: 814181 pages, LIFO batch:31 |
| 96 | [ 0.000000] Normal zone: 8904 pages used for memmap |
| 97 | [ 0.000000] Normal zone: 651264 pages, LIFO batch:31 |
| 98 | [ 0.000000] ACPI: PM-Timer IO Port: 0x808 |
| 99 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 100 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 101 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| 102 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 103 | [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| 104 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 105 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| 106 | [ 0.000000] ACPI: IRQ0 used by override. |
| 107 | [ 0.000000] ACPI: IRQ2 used by override. |
| 108 | [ 0.000000] ACPI: IRQ9 used by override. |
| 109 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 110 | [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| 111 | [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| 112 | [ 0.000000] nr_irqs_gsi: 40 |
| 113 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 114 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 115 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 116 | [ 0.000000] PM: Registered nosave memory: [mem 0xc7c65000-0xdfffffff] |
| 117 | [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| 118 | [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| 119 | [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff] |
| 120 | [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| 121 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 122 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| 123 | [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019ec00000 s85824 r8192 d20672 u1048576 |
| 124 | [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152 |
| 125 | [ 0.000000] pcpu-alloc: [0] 0 1 |
| 126 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1449330 |
| 127 | [ 0.000000] Policy zone: Normal |
| 128 | [ 0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img boot=live apm=power-off vga=791 nomce boot=live live-media-path=/live/grml64-small/ boot=live bootid=50cb75e9-61d3-4cda-9c64-fba7e464746e ssh=remote verbose console=ttyS0,115200n8 BOOT_IMAGE=/boot/grml64small/vmlinuz |
| 129 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 130 | [ 0.000000] Checking aperture... |
| 131 | [ 0.000000] No AGP bridge found |
| 132 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 133 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 134 | [ 0.000000] Memory: 5701724K/5877772K available (4965K kernel code, 697K rwdata, 1716K rodata, 1004K init, 952K bss, 176048K reserved) |
| 135 | [ 0.000000] Hierarchical RCU implementation. |
| 136 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 137 | [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. |
| 138 | [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 |
| 139 | [ 0.000000] spurious 8259A interrupt: IRQ7. |
| 140 | [ 0.000000] Console: colour dummy device 80x25 |
| 141 | [ 0.000000] console [ttyS0] enabled |
| 142 | [ 0.000000] hpet clockevent registered |
| 143 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 144 | [ 0.004000] tsc: Detected 1600.153 MHz processor |
| 145 | [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.30 BogoMIPS (lpj=6400612) |
| 146 | [ 0.010621] pid_max: default: 32768 minimum: 301 |
| 147 | [ 0.015295] Security Framework initialized |
| 148 | [ 0.019399] AppArmor: AppArmor disabled by boot time parameter |
| 149 | [ 0.025229] Yama: disabled by default; enable with sysctl kernel.yama.* |
| 150 | [ 0.032776] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| 151 | [ 0.046348] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 152 | [ 0.056495] Mount-cache hash table entries: 256 |
| 153 | [ 0.061451] Initializing cgroup subsys memory |
| 154 | [ 0.065828] Initializing cgroup subsys devices |
| 155 | [ 0.070271] Initializing cgroup subsys freezer |
| 156 | [ 0.074712] Initializing cgroup subsys blkio |
| 157 | [ 0.078979] Initializing cgroup subsys perf_event |
| 158 | [ 0.083730] tseg: 0000000000 |
| 159 | [ 0.083742] CPU: Physical Processor ID: 0 |
| 160 | [ 0.087765] CPU: Processor Core ID: 0 |
| 161 | [ 0.091429] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| 162 | [ 0.091429] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| 163 | [ 0.091429] tlb_flushall_shift: 5 |
| 164 | [ 0.105829] Freeing SMP alternatives memory: 20K (ffffffff819ab000 - ffffffff819b0000) |
| 165 | [ 0.116213] ACPI: Core revision 20131115 |
| 166 | [ 0.123960] ACPI: All ACPI Tables successfully acquired |
| 167 | [ 0.129717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| 168 | [ 0.175252] ..MP-BIOS bug: 8254 timer not connected to IO-APIC |
| 169 | [ 0.181074] ...trying to set up timer (IRQ0) through the 8259A ... |
| 170 | [ 0.187239] ..... (found apic 0 pin 0) ... |
| 171 | [ 0.231072] ....... failed. |
| 172 | [ 0.233857] ...trying to set up timer as Virtual Wire IRQ... |
| 173 | [ 0.279197] ..... works. |
| 174 | [ 0.281771] smpboot: CPU0: AMD G-T56N Processor (fam: 14, model: 01, stepping: 00) |
| 175 | [ 0.396405] Performance Events: AMD PMU driver. |
| 176 | [ 0.400950] ... version: 0 |
| 177 | [ 0.404954] ... bit width: 48 |
| 178 | [ 0.409044] ... generic registers: 4 |
| 179 | [ 0.413048] ... value mask: 0000ffffffffffff |
| 180 | [ 0.418351] ... max period: 00007fffffffffff |
| 181 | [ 0.423657] ... fixed-purpose events: 0 |
| 182 | [ 0.427660] ... event mask: 000000000000000f |
| 183 | [ 0.433471] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 184 | [ 0.441713] x86: Booting SMP configuration: |
| 185 | [ 0.445940] .... node #0, CPUs: #1 |
| 186 | [ 0.462831] x86: Booted up 1 node, 2 CPUs |
| 187 | [ 0.467024] smpboot: Total of 2 processors activated (6400.61 BogoMIPS) |
| 188 | [ 0.474417] devtmpfs: initialized |
| 189 | [ 0.485702] NET: Registered protocol family 16 |
| 190 | [ 0.490400] cpuidle: using governor ladder |
| 191 | [ 0.494509] cpuidle: using governor menu |
| 192 | [ 0.498593] ACPI: bus type PCI registered |
| 193 | [ 0.502613] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 194 | [ 0.509280] PCI: Using configuration type 1 for base access |
| 195 | [ 0.514844] PCI: Using configuration type 1 for extended access |
| 196 | [ 0.522217] bio: create slab <bio-0> at 0 |
| 197 | [ 0.526541] ACPI: Added _OSI(Module Device) |
| 198 | [ 0.530768] ACPI: Added _OSI(Processor Device) |
| 199 | [ 0.535206] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 200 | [ 0.539904] ACPI: Added _OSI(Processor Aggregator Device) |
| 201 | [ 0.547382] ACPI: Executed 2 blocks of module-level executable AML code |
| 202 | [ 0.558182] ACPI: Interpreter enabled |
| 203 | [ 0.561905] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) |
| 204 | [ 0.571159] ACPI: (supports S0 S1 S3 S4 S5) |
| 205 | [ 0.575339] ACPI: Using IOAPIC for interrupt routing |
| 206 | [ 0.580327] HEST: Table parsing has been initialized. |
| 207 | [ 0.585377] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 208 | [ 0.594662] ACPI: No dock devices found. |
| 209 | [ 0.617190] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 210 | [ 0.623429] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 211 | [ 0.631744] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 212 | [ 0.640378] PCI host bridge to bus 0000:00 |
| 213 | [ 0.644475] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 214 | [ 0.649954] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 215 | [ 0.656124] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| 216 | [ 0.662295] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 217 | [ 0.669160] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| 218 | [ 0.676034] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| 219 | [ 0.676222] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| 220 | [ 0.676238] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| 221 | [ 0.676249] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff] |
| 222 | [ 0.676259] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff] |
| 223 | [ 0.676321] pci 0000:00:01.0: supports D1 D2 |
| 224 | [ 0.676423] pci 0000:00:01.0: System wakeup disabled by ACPI |
| 225 | [ 0.682170] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400 |
| 226 | [ 0.682248] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold |
| 227 | [ 0.682351] pci 0000:00:04.0: System wakeup disabled by ACPI |
| 228 | [ 0.688100] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f |
| 229 | [ 0.688125] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| 230 | [ 0.688138] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| 231 | [ 0.688151] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| 232 | [ 0.688164] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| 233 | [ 0.688177] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| 234 | [ 0.688190] pci 0000:00:11.0: reg 0x24: [mem 0xf0246000-0xf02463ff] |
| 235 | [ 0.688216] pci 0000:00:11.0: set SATA to AHCI mode |
| 236 | [ 0.693263] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| 237 | [ 0.693282] pci 0000:00:12.0: reg 0x10: [mem 0xf0244000-0xf0244fff] |
| 238 | [ 0.693434] pci 0000:00:12.0: System wakeup disabled by ACPI |
| 239 | [ 0.699184] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| 240 | [ 0.699210] pci 0000:00:12.2: reg 0x10: [mem 0xf0247000-0xf02470ff] |
| 241 | [ 0.699309] pci 0000:00:12.2: supports D1 D2 |
| 242 | [ 0.699313] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| 243 | [ 0.699407] pci 0000:00:12.2: System wakeup disabled by ACPI |
| 244 | [ 0.705158] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| 245 | [ 0.705177] pci 0000:00:13.0: reg 0x10: [mem 0xf0245000-0xf0245fff] |
| 246 | [ 0.705329] pci 0000:00:13.0: System wakeup disabled by ACPI |
| 247 | [ 0.711062] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| 248 | [ 0.711087] pci 0000:00:13.2: reg 0x10: [mem 0xf0248000-0xf02480ff] |
| 249 | [ 0.711186] pci 0000:00:13.2: supports D1 D2 |
| 250 | [ 0.711190] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| 251 | [ 0.711286] pci 0000:00:13.2: System wakeup disabled by ACPI |
| 252 | [ 0.717033] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| 253 | [ 0.717261] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| 254 | [ 0.717290] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit] |
| 255 | [ 0.717370] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| 256 | [ 0.717540] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| 257 | [ 0.717762] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| 258 | [ 0.717892] pci 0000:00:14.4: System wakeup disabled by ACPI |
| 259 | [ 0.723641] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| 260 | [ 0.723802] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| 261 | [ 0.723957] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| 262 | [ 0.724114] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| 263 | [ 0.724289] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| 264 | [ 0.724450] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| 265 | [ 0.724606] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| 266 | [ 0.724760] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| 267 | [ 0.725031] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 |
| 268 | [ 0.725052] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff] |
| 269 | [ 0.725082] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| 270 | [ 0.725102] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| 271 | [ 0.725116] pci 0000:01:00.0: reg 0x30: [mem 0xf0100000-0xf011ffff pref] |
| 272 | [ 0.725182] pci 0000:01:00.0: supports D1 D2 |
| 273 | [ 0.725186] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 274 | [ 0.732578] pci 0000:00:04.0: PCI bridge to [bus 01] |
| 275 | [ 0.737608] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] |
| 276 | [ 0.737615] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff] |
| 277 | [ 0.737624] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| 278 | [ 0.737805] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) |
| 279 | [ 0.744597] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| 280 | [ 0.744601] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) |
| 281 | [ 0.744606] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| 282 | [ 0.744610] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| 283 | [ 0.745136] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15) |
| 284 | [ 0.751990] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15) |
| 285 | [ 0.758833] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15) |
| 286 | [ 0.765675] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15) |
| 287 | [ 0.772515] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15) |
| 288 | [ 0.779351] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11 |
| 289 | [ 0.784810] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15) |
| 290 | [ 0.791646] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15) |
| 291 | [ 0.798655] ACPI: Enabled 6 GPEs in block 00 to 1F |
| 292 | [ 0.803478] ACPI: \_SB_.PCI0: notify handler is installed |
| 293 | [ 0.803523] Found 1 acpi root devices |
| 294 | [ 0.803879] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none |
| 295 | [ 0.812036] vgaarb: loaded |
| 296 | [ 0.814741] vgaarb: bridge control possible 0000:00:01.0 |
| 297 | [ 0.820165] PCI: Using ACPI for IRQ routing |
| 298 | [ 0.824361] PCI: pci_cache_line_size set to 64 bytes |
| 299 | [ 0.824433] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 300 | [ 0.824438] e820: reserve RAM buffer [mem 0xc7c65000-0xc7ffffff] |
| 301 | [ 0.824441] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff] |
| 302 | [ 0.824702] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| 303 | [ 0.829629] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| 304 | [ 0.837547] Switched to clocksource hpet |
| 305 | [ 0.845487] pnp: PnP ACPI init |
| 306 | [ 0.848613] ACPI: bus type PNP registered |
| 307 | [ 0.852989] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 308 | [ 0.853048] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active) |
| 309 | [ 0.853074] pnp 00:02: [dma 4] |
| 310 | [ 0.853111] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) |
| 311 | [ 0.853183] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) |
| 312 | [ 0.853429] pnp: PnP ACPI: found 4 devices |
| 313 | [ 0.857525] ACPI: bus type PNP unregistered |
| 314 | [ 0.875083] pci 0000:00:04.0: PCI bridge to [bus 01] |
| 315 | [ 0.880058] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] |
| 316 | [ 0.886149] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff] |
| 317 | [ 0.892933] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| 318 | [ 0.900674] pci 0000:00:14.4: PCI bridge to [bus 02] |
| 319 | [ 0.905652] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 320 | [ 0.905656] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 321 | [ 0.905660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 322 | [ 0.905664] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| 323 | [ 0.905668] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| 324 | [ 0.905672] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff] |
| 325 | [ 0.905676] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| 326 | [ 0.905680] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] |
| 327 | [ 0.905684] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] |
| 328 | [ 0.905687] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] |
| 329 | [ 0.905691] pci_bus 0000:02: resource 7 [mem 0xe0000000-0xffffffff] |
| 330 | [ 0.905812] NET: Registered protocol family 2 |
| 331 | [ 0.910587] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| 332 | [ 0.918319] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 333 | [ 0.925761] TCP: Hash tables configured (established 65536 bind 65536) |
| 334 | [ 0.932441] TCP: reno registered |
| 335 | [ 0.935724] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| 336 | [ 0.941927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| 337 | [ 0.948861] NET: Registered protocol family 1 |
| 338 | [ 0.953257] pci 0000:00:01.0: Boot video device |
| 339 | [ 0.955045] PCI: CLS 64 bytes, default 64 |
| 340 | [ 0.955160] Unpacking initramfs... |
| 341 | [ 4.476971] Freeing initrd memory: 16588K (ffff88007efcc000 - ffff88007ffff000) |
| 342 | [ 4.484346] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 343 | [ 4.490785] software IO TLB [mem 0xc3c65000-0xc7c65000] (64MB) mapped at [ffff8800c3c65000-ffff8800c7c64fff] |
| 344 | [ 4.500925] LVT offset 0 assigned for vector 0x400 |
| 345 | [ 4.505804] perf: AMD IBS detected (0x000000ff) |
| 346 | [ 4.510468] microcode: CPU0: patch_level=0x05000029 |
| 347 | [ 4.515351] microcode: CPU1: patch_level=0x05000029 |
| 348 | [ 4.520399] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 349 | [ 4.529176] Scanning for low memory corruption every 60 seconds |
| 350 | [ 4.535894] audit: initializing netlink socket (disabled) |
| 351 | [ 4.541340] type=2000 audit(1445940381.236:1): initialized |
| 352 | [ 4.571570] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 353 | [ 4.579678] VFS: Disk quotas dquot_6.5.2 |
| 354 | [ 4.583743] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 355 | [ 4.590340] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| 356 | [ 4.596447] aufs 3.13-20140127 |
| 357 | [ 4.599510] msgmni has been set to 11168 |
| 358 | [ 4.604460] alg: No test for stdrng (krng) |
| 359 | [ 4.608672] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 360 | [ 4.616182] io scheduler noop registered |
| 361 | [ 4.620106] io scheduler deadline registered |
| 362 | [ 4.624426] io scheduler cfq registered (default) |
| 363 | [ 4.629524] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X |
| 364 | [ 4.629688] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt |
| 365 | [ 4.636648] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| 366 | [ 4.643173] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded |
| 367 | [ 4.643197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 368 | [ 4.648797] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 369 | [ 4.655565] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x180000 bytes, mapped to 0xffffc90000e00000 |
| 370 | [ 4.666813] simple-framebuffer simple-framebuffer.0: format=r5g6b5, mode=1024x768x16, linelength=2048 |
| 371 | [ 4.678804] Console: switching to colour frame buffer device 128x48 |
| 372 | [ 4.687765] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! |
| 373 | [ 4.695060] GHES: Failed to enable APEI firmware first mode. |
| 374 | [ 4.700996] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 375 | [ 4.727825] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| 376 | [ 4.756303] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| 377 | [ 4.784784] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A |
| 378 | [ 4.813163] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A |
| 379 | [ 4.821436] Linux agpgart interface v0.103 |
| 380 | [ 4.825741] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| 381 | [ 4.833131] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 382 | [ 4.838136] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 383 | [ 4.843801] mousedev: PS/2 mouse device common for all mice |
| 384 | [ 4.849524] rtc_cmos 00:00: RTC can wake from S4 |
| 385 | [ 4.854414] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 |
| 386 | [ 4.860556] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| 387 | [ 4.867712] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| 388 | [ 4.874173] AMD IOMMUv2 functionality not available on this system |
| 389 | [ 4.880598] TCP: cubic registered |
| 390 | [ 4.884069] NET: Registered protocol family 10 |
| 391 | [ 4.888950] mip6: Mobile IPv6 |
| 392 | [ 4.891970] NET: Registered protocol family 17 |
| 393 | [ 4.896415] mpls_gso: MPLS GSO support |
| 394 | [ 4.900931] registered taskstats version 1 |
| 395 | [ 4.906337] rtc_cmos 00:00: setting system clock to 2015-10-27 10:06:22 UTC (1445940382) |
| 396 | [ 4.914486] PM: Hibernation image not present or could not be loaded. |
| 397 | [ 4.916543] Freeing unused kernel memory: 1004K (ffffffff818b0000 - ffffffff819ab000) |
| 398 | [ 4.924447] Write protecting the kernel read-only data: 8192k |
| 399 | [ 4.936620] Freeing unused kernel memory: 1168K (ffff8800014dc000 - ffff880001600000) |
| 400 | [ 4.946415] Freeing unused kernel memory: 332K (ffff8800017ad000 - ffff880001800000) |
| 401 | [ 4.998893] systemd-udevd[64]: starting version 204 |
| 402 | [ 5.040094] ACPI: bus type USB registered |
| 403 | [ 5.055005] SCSI subsystem initialized |
| 404 | [ 5.057654] usbcore: registered new interface driver usbfs |
| 405 | [ 5.057681] usbcore: registered new interface driver hub |
| 406 | [ 5.073299] usbcore: registered new device driver usb |
| 407 | [ 5.078481] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| 408 | [ 5.084904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 409 | [ 5.085355] r8169 0000:01:00.0: irq 41 for MSI/MSI-X |
| 410 | [ 5.085735] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc90000c16000, 00:03:2d:19:6d:87, XID 081000c0 IRQ 41 |
| 411 | [ 5.085738] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| 412 | [ 5.110626] ehci-pci: EHCI PCI platform driver |
| 413 | [ 5.115162] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 414 | [ 5.121598] QUIRK: Enable AMD PLL fix |
| 415 | [ 5.121636] ehci-pci 0000:00:12.2: EHCI Host Controller |
| 416 | [ 5.127144] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| 417 | [ 5.138236] ohci-pci: OHCI PCI platform driver |
| 418 | [ 5.139329] [drm] Initialized drm 1.1.0 20060810 |
| 419 | [ 5.149901] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 |
| 420 | [ 5.158188] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 421 | [ 5.162175] thermal LNXTHERM:00: registered as thermal_zone0 |
| 422 | [ 5.162177] ACPI: Thermal Zone [TZ00] (53 C) |
| 423 | [ 5.176833] ehci-pci 0000:00:12.2: debug port 1 |
| 424 | [ 5.177630] ACPI: Power Button [PWRB] |
| 425 | [ 5.177771] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| 426 | [ 5.177774] ACPI: Power Button [PWRF] |
| 427 | [ 5.197125] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0247000 |
| 428 | [ 5.213686] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| 429 | [ 5.230307] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 430 | [ 5.237131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 431 | [ 5.244351] usb usb1: Product: EHCI Host Controller |
| 432 | [ 5.249228] usb usb1: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd |
| 433 | [ 5.255576] usb usb1: SerialNumber: 0000:00:12.2 |
| 434 | [ 5.260266] libata version 3.00 loaded. |
| 435 | [ 5.264415] [drm] radeon kernel modesetting enabled. |
| 436 | [ 5.279247] hub 1-0:1.0: USB hub found |
| 437 | [ 5.284483] hub 1-0:1.0: 5 ports detected |
| 438 | [ 5.291278] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| 439 | [ 5.297128] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2 |
| 440 | [ 5.307901] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0244000 |
| 441 | [ 5.373863] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| 442 | [ 5.380655] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 443 | [ 5.387874] usb usb2: Product: OHCI PCI host controller |
| 444 | [ 5.393092] usb usb2: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd |
| 445 | [ 5.399442] usb usb2: SerialNumber: 0000:00:12.0 |
| 446 | [ 5.404486] hub 2-0:1.0: USB hub found |
| 447 | [ 5.408277] hub 2-0:1.0: 5 ports detected |
| 448 | [ 5.412804] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| 449 | [ 5.418385] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3 |
| 450 | [ 5.425802] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0245000 |
| 451 | [ 5.489848] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 |
| 452 | [ 5.496656] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 453 | [ 5.503873] usb usb3: Product: OHCI PCI host controller |
| 454 | [ 5.505636] tsc: Refined TSC clocksource calibration: 1599.999 MHz |
| 455 | [ 5.515270] usb usb3: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd |
| 456 | [ 5.521624] usb usb3: SerialNumber: 0000:00:13.0 |
| 457 | [ 5.526550] hub 3-0:1.0: USB hub found |
| 458 | [ 5.530316] hub 3-0:1.0: 5 ports detected |
| 459 | [ 5.534604] ahci 0000:00:11.0: version 3.0 |
| 460 | [ 5.535000] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode |
| 461 | [ 5.543104] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| 462 | [ 5.552037] scsi0 : ahci |
| 463 | [ 5.554792] scsi1 : ahci |
| 464 | [ 5.557427] scsi2 : ahci |
| 465 | [ 5.560076] scsi3 : ahci |
| 466 | [ 5.562691] ata1: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246100 irq 19 |
| 467 | [ 5.570087] ata2: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246180 irq 19 |
| 468 | [ 5.577474] ata3: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246200 irq 19 |
| 469 | [ 5.584861] ata4: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246280 irq 19 |
| 470 | [ 5.592340] checking generic (e0000000 180000) vs hw (e0000000 10000000) |
| 471 | [ 5.592343] fb: conflicting fb hw usage radeondrmfb vs simple - removing generic driver |
| 472 | [ 5.600408] Console: switching to colour dummy device 80x25 |
| 473 | [ 5.605677] usb 1-2: new high-speed USB device number 2 using ehci-pci |
| 474 | [ 5.613816] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802). |
| 475 | [ 5.621721] [drm] register mmio base: 0xF0200000 |
| 476 | [ 5.626348] [drm] register mmio size: 262144 |
| 477 | [ 5.630694] ATOM BIOS: AMD |
| 478 | [ 5.633481] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| 479 | [ 5.642190] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| 480 | [ 5.649840] [drm] Detected VRAM RAM=384M, BAR=256M |
| 481 | [ 5.654627] [drm] RAM width 32bits DDR |
| 482 | [ 5.658509] [TTM] Zone kernel: Available graphics memory: 2860418 kiB |
| 483 | [ 5.665042] [TTM] Zone dma32: Available graphics memory: 2097152 kiB |
| 484 | [ 5.671562] [TTM] Initializing pool allocator |
| 485 | [ 5.675924] [TTM] Initializing DMA pool allocator |
| 486 | [ 5.680661] [drm] radeon: 384M of VRAM memory ready |
| 487 | [ 5.685552] [drm] radeon: 1024M of GTT memory ready. |
| 488 | [ 5.690920] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| 489 | [ 5.712830] [drm] Loading PALM Microcode |
| 490 | [ 5.719592] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). |
| 491 | [ 5.726834] radeon 0000:00:01.0: WB enabled |
| 492 | [ 5.731033] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88007ee26c00 |
| 493 | [ 5.741808] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88007ee26c0c |
| 494 | [ 5.746589] usb 1-2: New USB device found, idVendor=0457, idProduct=0151 |
| 495 | [ 5.746593] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=3 |
| 496 | [ 5.746596] usb 1-2: Product: USB Mass Storage Device |
| 497 | [ 5.746598] usb 1-2: SerialNumber: 95b13507ca411e |
| 498 | [ 5.776877] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001132118 |
| 499 | [ 5.787667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 500 | [ 5.794291] [drm] Driver supports precise vblank timestamp query. |
| 501 | [ 5.800421] radeon 0000:00:01.0: irq 42 for MSI/MSI-X |
| 502 | [ 5.800446] radeon 0000:00:01.0: radeon: using MSI. |
| 503 | [ 5.805378] [drm] radeon: irq initialized. |
| 504 | [ 5.826635] [drm] ring test on 0 succeeded in 1 usecs |
| 505 | [ 5.831794] [drm] ring test on 3 succeeded in 1 usecs |
| 506 | [ 5.853700] usb 1-4: new high-speed USB device number 3 using ehci-pci |
| 507 | [ 5.892578] [drm] ring test on 5 succeeded in 1 usecs |
| 508 | [ 5.913667] ata1: SATA link down (SStatus 0 SControl 300) |
| 509 | [ 5.917562] [drm] UVD initialized successfully. |
| 510 | [ 5.918415] [drm] Enabling audio 0 support |
| 511 | [ 5.918480] [drm] ib test on ring 0 succeeded in 0 usecs |
| 512 | [ 5.918533] [drm] ib test on ring 3 succeeded in 0 usecs |
| 513 | [ 5.937596] [drm] ib test on ring 5 succeeded |
| 514 | [ 5.942694] ata3: SATA link down (SStatus 0 SControl 300) |
| 515 | [ 5.948190] ata4: SATA link down (SStatus 0 SControl 300) |
| 516 | [ 5.953634] ata2: SATA link down (SStatus 0 SControl 300) |
| 517 | [ 5.957976] [drm] Radeon Display Connectors |
| 518 | [ 5.957978] [drm] Connector 0: |
| 519 | [ 5.957979] [drm] DVI-D-1 |
| 520 | [ 5.957980] [drm] HPD2 |
| 521 | [ 5.957983] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| 522 | [ 5.957983] [drm] Encoders: |
| 523 | [ 5.957985] [drm] DFP1: INTERNAL_UNIPHY |
| 524 | [ 5.957986] [drm] Connector 1: |
| 525 | [ 5.957987] [drm] VGA-1 |
| 526 | [ 5.957989] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| 527 | [ 5.957990] [drm] Encoders: |
| 528 | [ 5.957991] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| 529 | [ 5.958049] [drm] Internal thermal controller without fan control |
| 530 | [ 5.958102] [drm] Found smc ucode version: 0x00010601 |
| 531 | [ 5.958328] [drm] radeon: dpm initialized |
| 532 | [ 5.969995] radeon 0000:00:01.0: No connectors reported connected with modes |
| 533 | [ 5.970004] [drm] Cannot find any crtc or sizes - going 1024x768 |
| 534 | [ 5.971425] [drm] fb mappable at 0xE0477000 |
| 535 | [ 5.971426] [drm] vram apper at 0xE0000000 |
| 536 | [ 5.971427] [drm] size 3145728 |
| 537 | [ 5.971428] [drm] fb depth is 24 |
| 538 | [ 5.971429] [drm] pitch is 4096 |
| 539 | [ 6.052803] fbcon: radeondrmfb (fb0) is primary device |
| 540 | [ 6.055038] Console: switching to colour frame buffer device 128x48 |
| 541 | [ 6.071447] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| 542 | [ 6.077887] radeon 0000:00:01.0: registered panic notifier |
| 543 | [ 6.083412] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0 |
| 544 | [ 6.084805] usb 1-4: New USB device found, idVendor=0781, idProduct=5406 |
| 545 | [ 6.084810] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 546 | [ 6.084813] usb 1-4: Product: U3 Cruzer Micro |
| 547 | [ 6.084815] usb 1-4: Manufacturer: SanDisk Corporation |
| 548 | [ 6.084817] usb 1-4: SerialNumber: 000016215270D67E |
| 549 | [ 6.182677] ehci-pci 0000:00:13.2: EHCI Host Controller |
| 550 | [ 6.187942] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 |
| 551 | [ 6.195351] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| 552 | [ 6.204055] ehci-pci 0000:00:13.2: debug port 1 |
| 553 | [ 6.208636] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0248000 |
| 554 | [ 6.225809] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| 555 | [ 6.231657] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 |
| 556 | [ 6.238457] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 557 | [ 6.245675] usb usb4: Product: EHCI Host Controller |
| 558 | [ 6.250549] usb usb4: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd |
| 559 | [ 6.256896] usb usb4: SerialNumber: 0000:00:13.2 |
| 560 | [ 6.261860] hub 4-0:1.0: USB hub found |
| 561 | [ 6.265627] hub 4-0:1.0: 5 ports detected |
| 562 | [ 6.333965] hub 3-0:1.0: USB hub found |
| 563 | [ 6.339933] hub 3-0:1.0: 5 ports detected |
| 564 | [ 6.353351] usb-storage 1-2:1.0: USB Mass Storage device detected |
| 565 | [ 6.359674] usb-storage 1-2:1.0: Quirks match for vid 0457 pid 0151: 80 |
| 566 | [ 6.366614] scsi4 : usb-storage 1-2:1.0 |
| 567 | [ 6.370944] usb-storage 1-4:1.0: USB Mass Storage device detected |
| 568 | [ 6.377387] scsi5 : usb-storage 1-4:1.0 |
| 569 | [ 6.381407] usbcore: registered new interface driver usb-storage |
| 570 | [ 6.409516] device-mapper: uevent: version 1.0.3 |
| 571 | [ 6.414465] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com |
| 572 | [ 6.502119] Switched to clocksource tsc |
| 573 | [ 7.372684] scsi 4:0:0:0: Direct-Access JetFlash TS4GJF2A/120 0.00 PQ: 0 ANSI: 2 |
| 574 | [ 7.382831] scsi 5:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.21 PQ: 0 ANSI: 2 |
| 575 | [ 7.401918] sd 4:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB) |
| 576 | [ 7.410283] sd 5:0:0:0: [sdb] 2006673 512-byte logical blocks: (1.02 GB/979 MiB) |
| 577 | [ 7.414918] sd 4:0:0:0: [sda] Write Protect is off |
| 578 | [ 7.414925] sd 4:0:0:0: [sda] Mode Sense: 00 00 00 00 |
| 579 | [ 7.415745] sd 4:0:0:0: [sda] Asking for cache data failed |
| 580 | [ 7.415748] sd 4:0:0:0: [sda] Assuming drive cache: write through |
| 581 | [ 7.419463] sd 4:0:0:0: [sda] Asking for cache data failed |
| 582 | [ 7.419466] sd 4:0:0:0: [sda] Assuming drive cache: write through |
| 583 | [ 7.420460] sda: sda1 |
| 584 | [ 7.424297] sd 4:0:0:0: [sda] Asking for cache data failed |
| 585 | [ 7.424300] sd 4:0:0:0: [sda] Assuming drive cache: write through |
| 586 | [ 7.424306] sd 4:0:0:0: [sda] Attached SCSI removable disk |
| 587 | [ 7.467086] sd 5:0:0:0: [sdb] Write Protect is off |
| 588 | [ 7.472525] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00 |
| 589 | [ 7.476017] sd 5:0:0:0: [sdb] No Caching mode page found |
| 590 | [ 7.482148] sd 5:0:0:0: [sdb] Assuming drive cache: write through |
| 591 | [ 7.492074] sd 5:0:0:0: [sdb] No Caching mode page found |
| 592 | [ 7.497783] sd 5:0:0:0: [sdb] Assuming drive cache: write through |
| 593 | [ 7.513533] sdb: sdb1 |
| 594 | [ 7.520596] sd 5:0:0:0: [sdb] No Caching mode page found |
| 595 | [ 7.525983] sd 5:0:0:0: [sdb] Assuming drive cache: write through |
| 596 | [ 7.532100] sd 5:0:0:0: [sdb] Attached SCSI removable disk |
| 597 | [ 7.542306] sd 4:0:0:0: Attached scsi generic sg0 type 0 |
| 598 | [ 7.548344] sd 5:0:0:0: Attached scsi generic sg1 type 0 |
| 599 | [ 7.969861] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| 600 | [ 8.223098] loop: module loaded |
| 601 | [ 8.297910] loop0: unknown partition table |
| 602 | [ 8.988615] random: nonblocking pool is initialized |
| 603 | [ 11.129872] pci_pm_runtime_suspend(): radeon_pmops_runtime_suspend+0x0/0x90 [radeon] returns -22 |
| 604 | [ 11.739088] FS-Cache: Loaded |
| 605 | [ 11.769921] 9pnet: Installing 9P2000 support |
| 606 | [ 11.801456] 9p: Installing v9fs 9p2000 file system support |
| 607 | [ 11.807085] FS-Cache: Netfs '9p' registered for caching |
| 608 | [ 15.900601] systemd-udevd[795]: starting version 204 |
| 609 | [ 16.055549] ACPI: acpi_idle registered with cpuidle |
| 610 | [ 16.186836] acpi-cpufreq: overriding BIOS provided _PSD data |
| 611 | [ 16.249630] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| 612 | [ 16.257384] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8060 |
| 613 | [ 16.313959] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| 614 | [ 16.533857] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 |
| 615 | [ 16.549899] sp5100_tco: PCI Revision ID: 0x42 |
| 616 | [ 16.557644] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address |
| 617 | [ 16.563873] sp5100_tco: Last reboot was not triggered by watchdog. |
| 618 | [ 16.592200] sp5100_tco: initialized (0xffffc90000de4b00). heartbeat=60 sec (nowayout=0) |
| 619 | [ 16.881780] kvm: Nested Virtualization enabled |
| 620 | [ 16.886296] kvm: Nested Paging enabled |
| 621 | [ 16.953242] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7 |
| 622 | [ 17.035767] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 |
| 623 | [ 17.059498] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 |
| 624 | [ 17.105784] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 |
| 625 | [ 19.849849] RPC: Registered named UNIX socket transport module. |
| 626 | [ 19.855805] RPC: Registered udp transport module. |
| 627 | [ 19.860518] RPC: Registered tcp transport module. |
| 628 | [ 19.865219] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 629 | [ 20.048399] FS-Cache: Netfs 'nfs' registered for caching |
| 630 | [ 20.287067] r8169 0000:01:00.0 eth0: link down |
| 631 | [ 20.291626] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 632 | [ 20.297517] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| 633 | [ 20.297534] r8169 0000:01:00.0 eth0: link down |
| 634 | [ 23.467719] r8169 0000:01:00.0 eth0: link up |
| 635 | [ 23.467772] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 636 | [ 25.862700] fuse init (API version 7.22) |
| 637 | [ 25.949115] ipmi message handler version 39.2 |
| 638 | [ 43.675193] r8169 0000:01:00.0 eth0: link down |
| 639 | [ 43.675272] r8169 0000:01:00.0 eth0: link down |
| 640 | [ 43.675301] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 641 | [ 46.217912] r8169 0000:01:00.0 eth0: link up |
| 642 | [ 46.217942] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 643 | [ 73.279504] type=1006 audit(1445940438.992:2): pid=3106 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1 |
| 644 | [ 100.759743] type=1006 audit(1445940466.472:3): pid=3113 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1 |
| 645 | [ 109.926256] type=1006 audit(1445940475.640:4): pid=3118 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=3 res=1 |
| 646 | [ 110.069041] type=1006 audit(1445940475.780:5): pid=3123 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=4 res=1 |
| 647 | [ 110.215112] type=1006 audit(1445940475.928:6): pid=3128 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=5 res=1 |
| 648 | [ 110.345985] type=1006 audit(1445940476.060:7): pid=3133 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=6 res=1 |
| 649 | [ 235.782944] type=1006 audit(1445940601.496:8): pid=3155 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=7 res=1 |
| 650 | [ 235.920337] type=1006 audit(1445940601.632:9): pid=3160 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=8 res=1 |
| 651 | [ 236.057013] type=1006 audit(1445940601.768:10): pid=3165 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=9 res=1 |
| 652 | [ 236.196193] type=1006 audit(1445940601.908:11): pid=3170 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=10 res=1 |